Marmitek MegaView 60 Manuale utente

Categoria
Interruttori video
Tipo
Manuale utente
MegaView 60
User manual
Gebrauchsanleitung
Guide utilisateur
Modo de empleo
Manuale distruzioni
Gebruiksaanwijzing
3
9
15
21
27
33
© MARMITEK
2
MegaView 60
3
ENGLISH
Table of contents
Table of contents ................................................................................................... 3
Safety instructions .................................................................................................. 3
Introduction ............................................................................................................ 4
Content of the packing ........................................................................................... 4
CAT5e/CAT6 cable requirements ........................................................................... 4
Installation .............................................................................................................. 5
6.1 Usage .................................................................................................................... 5
Frequently asked questions (FAQs) ....................................................................... 6
Technical specifications ......................................................................................... 6
Notification ............................................................................................................. 7
9.1 Declaration of Conformity ....................................................................................... 7
9.2 Recycling ............................................................................................................... 7
9.3 Copyrights .............................................................................................................. 8
Safety instructions
Please read these instructions thoroughly before you use the device and keep
them for future reference.
To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the
product close to a bath, swimming pool etc.
Do not expose the components of your systems to extremely high temperatures or
bright light sources.
In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the
case of improper usage of the product or when the product is used for purposes
other than specified. Marmitek does not accept responsibility for additional
damage other than covered by the legal product responsibility.
This product is not a toy. Keep out of reach of children.
Do not open the product: the device may contain live parts. The product should
only be repaired or serviced by a qualified expert.
Only connect the adapter to the mains after checking whether the mains voltage is
the same as the values on the identification tags. Never connect an adapter or
power cord when it is damaged. In that case, contact your supplier.
© MARMITEK
4
Introduction
Congratulations on your purchase of the Marmitek MegaView 60! The MegaView 60
enables you to easily extend an HDMI (High Definition Multimedia Interface) signal or
DVI (Digital Visual Interface) over two CAT5e/6 cables. Maximum CAT5e/6 cable
length is 30 metres for 1080p resolution and 60 metres for 480p resolution. Appliances
connected to this may include an HD set-top box, media center PC, HD-media player,
blu-ray disk player or game console.
All Marmitek products are manufactured with the utmost precision and are of high
quality. Please read this manual carefully and follow the instructions to enjoy the
possibilities of this product optimally.
Content of the packing
1x transmitter (HDMI Transmitter)
1x receiver (HDMI Receiver)
1x Power adapter
1x User manual
CAT5e/CAT6 cable requirements
UTP-, FTP- or STP-cable
24AWG or lower
Solid twisted pair
100 ohm at 1MHz
RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality).
Use a ‘solid twisted pair CAT-5e or CAT-6 cable’ in order to optimise transfer quality.
MegaView 60
5
ENGLISH
Installation
In order to ensure that the system is working properly you are advised to check the set-
up with short CAT-5e/6 cable lengths first.
1. Switch off all appliances before you start connecting.
2. Connect the HDMI source (HD-DVD player, Blu-ray disc player, HD set-top box,
game console, etc.) to the MegaView 60 transmitter [1], using an HDMI cable (not
provided).
3. Connect the MegaView 60 receiver to the appliance shown [2] (e.g. HDTV or
projector), using an HDMI cable (not provided).
4. Use two CAT5e/6 Ethernet cables to connect the MegaView 60 transmitter with
the MegaView 60 receiver [3&4].
*The RJ45 plug on these cables must be connected according to EIA/TIA T568B
standard, see attachment page xx.
Make sure that the CAT5e/6 cable and the transmitter and receiver connections
(CAT5e-1 en CAT5e-2) correspond to one another.
5. Connect the power adapter [5] to the ‘DC/5V’ connection on the MegaView 60
receiver (HDMI Receiver) and plug the adapter into a socket.
6.1 Usage
1. Switch on the HDMI source (e.g. HD set-top box or multi media PC).
2. Switch on the display device (for instance HDTV or projector) and select the
appropriate input. Usually you will do this by pressing the A/V or EXT button of
your remote control.
3. You will receive images from the connected A/V device immediately.
CAT5e-2
CAT5e-1
HDMI
HDMI
12
3 & 4
5
HDTV
Blu-ray player
MediaCenter PC
HD Settop box
HD TRANS MI TTER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
HD RECEIVER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
© MARMITEK
6
Frequently asked questions (FAQs)
Bad (or no) image and sound
Ensure that the CAT5e/6 cables are connected correctly between the
MegaView60/61 transmitter and receiver (CAT5e-1 to CAT5e-1 and CAT5e-2 to
CAT5e-2).
Check if the A/V device is switched on.
Use only CAT5e/CAT6 cable as specified in chapter 3 (CAT5e Cable
Requirements).
Check if the CAT5e/CAT6 cable provides a solid connection (no cable faults).
Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
Please refer to attachment page XX
Please ensure that the maximum cable length is not exceeded.
Install your system as far away from any RF sources (wireless devices) as
possible.
Set a low resolution on your HDMI source. The CAT5e/6 cable used probably
cannot deal with the higher resolution bandwidth.
Do you have any questions that are not answered above?
Please check www.marmitek.com.
Technical specifications
Resolution
Supported HDTV Resolutions 480p, 576i, 576p, 720p, 1080i, 1080p
Single link Bit Rate (max) 1.65 Gbps
Supported Standards HDMI DVI, HDCP
Transmitter
HDMI input (19-pin female) 1 HDMI
Video signal input 0.5 1.0V p-p
DDC signal input 5V p-p
Receiver
HDMI output (19-pin female) 1 HDMI
Video output HDMI V1.2a
CAT5e/6 cable length (max.) 60m for 480p and 30m for 1080p (MegaView60)
Transmitter/Receiver
Dimensions (H x B x D) 45mm x 25mm x 81mm
Weight 246g
Environment
Ambient temperature +0 to +70° C
Ambient humidity 10% to 85%
Power
Input 100-240VAC @50-60Hz
Output 5VDC 2A
Specifications may be modified without prior notice.
MegaView 60
7
ENGLISH
Notification
9.1 Declaration of Conformity
Hereby, Marmitek BV, declares that this MegaView 60™ is in compliance
with the essential requirements and other relevant provisions of the
following Directives:
Directive 2014/30/EU of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility (recast)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of the Member States relating to the making
available on the market of electrical equipment designed for use within certain voltage
limits.
Directive (EU) 2017/2102 of the European Parliament and of the Council of 15
November 2017 amending Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down Ecodesign
requirements for external power supplies pursuant to Directive 2009/125/EC of the
European Parliament and of the Council and repealing Commission Regulation (EC)
No 278/2009.
You can read the full Declaration of Conformity at http://www.marmitek.com
9.2 Recycling
Environmental Information for Customers in the European Union and other
European countries with separate collection systems.
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. It is your
responsibility to dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the
environment and human health. For more detailed information about the disposal of
your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
© MARMITEK
8
9.3 Copyrights
Marmitek is a trademark of Germatron B.V. MegaView 60 is a trademark of Marmitek
B.V. All rights reserved. Every effort has been made to ensure that the information in
this manual is accurate. Marmitek is not responsible for printing or clerical errors.
Copyright and all other proprietary rights in the content (including but not limited to
model numbers, software, audio, video, text and photographs) rests with Marmitek B.V.
Any use of the Content, but without limitation, distribution, reproduction, modification,
display or transmission without the prior written consent of Marmitek is strictly
prohibited. All copyright and other proprietary notices shall be retained on all
reproductions. Other company and product names mentioned herein may be
trademarks of their respective companies. Mention of third-party products is for
informational purposes only and constitutes neither an endorsement nor a
recommendation. Marmitek assumes no responsibility with regard to the performance
or use of these products.
Marmitek BV - PO Box 4257 - 5604 EG Eindhoven
The Netherlands
MegaView 60
9
DEUTSCH
1 Inhaltsverzeichnis
1 Inhaltsverzeichnis .................................................................................................. 9
2 Sicherheitshinweise ............................................................................................... 9
3 Einführung ........................................................................................................... 10
4 Verpackungsinhalt ............................................................................................... 10
5 Anforderungen CAT5e/CAT6 Kabel ..................................................................... 10
6 Installation ............................................................................................................ 11
6.1 Anwendung .......................................................................................................... 11
7 Häufig gestellte Fragen (FAQs) ............................................................................ 12
8 Technische Daten ................................................................................................ 12
9 Hinweis ................................................................................................................ 13
9.1 Konformitätserklärung .......................................................................................... 13
9.2 Recycling ............................................................................................................. 13
9.3 Urheberrechte ...................................................................................................... 14
2 Sicherheitshinweise
Lesen Sie diese Gebrauchsanleitung sorgfältig durch, bevor Sie das Gerät in
Betrieb nehmen und bewahren Sie diese Anleitung bitte für eventuelle, spätere
Bedarfsfälle auf.
Um Kurzschluss vorzubeugen, dieses Produkt bitte ausschließlich innerhalb des
Hauses und nur in trockenen Räumen nutzen. Setzen Sie die Komponenten nicht
Regen oder Feuchtigkeit aus. Nicht neben oder nahe eines Bades,
Schwimmbades usw. verwenden.
Setzen Sie die Komponente Ihres Systems nicht extrem hohen Temperaturen
oder starken Lichtquellen aus.
Bei einer zweckwidrigen Verwendung, selbst angebrachten Veränderungen oder
selbst ausgeführten Reparaturen verfallen alle Garantiebestimmungen. Marmitek
übernimmt bei einer falschen Verwendung des Produkts oder bei einer anderen
Verwendung des Produktes als für den vorgesehenen Zweck keinerlei
Produkthaftung. Marmitek übernimmt für Folgeschäden keine andere Haftung als
die gesetzliche Produkthaftung.
Dieses Produkt ist kein Spielzeug. Außer Reichweite von Kindern halten.
Das Produkt niemals öffnen: Das Gerät kann Teile enthalten, worauf
lebensgefährliche Stromspannung steht. Überlassen Sie Reparaturen oder
Wartung nur Fachleuten.
Schließen Sie den Netzadapter erst dann an das Stromnetz an, nachdem Sie
überprüft haben, ob die Netzspannung mit dem auf dem Typenschild angegeben
Wert übereinstimmt. Schließen Sie niemals einen Netzadapter oder ein Netzkabel
an, wenn diese beschädigt sind. In diesem Fall nehmen Sie Kontakt mit Ihrem
Lieferanten auf.
© MARMITEK
10
3 Einführung
Herzlichen Glückwunsch zum Erwerb des Marmitek MegaVieuw 60! Der MegaView 60
macht es auf einfache Weise möglich, ein HDMI (High Definition Multimedia Interface)
Signal oder DVI (Digital Visual Interface) über zwei CAT5e/6 Ethernet Kabel zu
verlängern. Die Höchstlänge des CAT5e/6 Kabels beträgt 30 Meter bei 1080p
Auflösung und 60 Meter bei 480p Auflösung. Geräte die hieran angeschlossen werden
können sind beispielsweise eine HD Set Top Box, Media Center PC, HD-Media Player,
Blue-Rau Disk-Player oder Game-Pulte.
Die Produkte Marmiteks werden mit großer Sorgfalt hergestellt und sind von hoher
Qualität. Lesen Sie diese Anleitung bitte sorgfältig durch und befolgen Sie die
Anweisungen, um die Möglichkeiten dieses Produkts optimal nutzen zu können.
4 Verpackungsinhalt
1x Sender (HDMI Transmitter)
1x Empfänger (HDMI Receiver)
1 x Speisungsadapter
1 x Gebrauchsanleitung
5 Anforderungen CAT5e/CAT6 Kabel
UTP-, FTP- oder STP- Kabel
24AWG oder niedriger
Solid Twisted Pair Kabel
100 Ohm bei 1MHz
RJ-45 Anschluss gemäß der EIA/TIA T568B Norm
Anstatt eines CAT5e Kabels kann auch ein CAT6 Kabel verwendet werden (dieses ist
von besserer Qualität). Zur Optimierung der Übertragungsqualität nutzen Sie dann
“Solid Twisted Pair CAT-5e oder CAT-6 Kabel.
MegaView 60
11
DEUTSCH
6 Installation
Zur Kontrolle der Betriebsfähigkeit des Systems empfehlen wir, die von Ihnen geplante
Aufstellung zunächst mit kurzen CAT-5e/6 Kabellängen auszuprobieren.
1. Schalten Sie, bevor Sie beginnen, sämtliche Geräte aus.
2. Schließen Sie die HDMI Quelle (HD-DVD Player, Blu-Ray Disc Player, HD-Set
Top Box, Game-Pult usw.) mithilfe eines HDMI Kabels (nicht im Packungsinhalt
enthalten) an den MegaView 60 Sender [1] an.
3. Schließen Sie den MegaView 60 Empfänger mithilfe eines HDMI Kabels (nicht im
Packungsinhalt enthalten) an Ihr Wiedergabegerät [2] (beispielsweise HDTV oder
Projektor) an.
4. Verwenden Sie zwei CAT5e/6 Ethernet-Kabel um den Sender und den
Empfänger miteinander zu verbinden [3 & 4].
* Der RJ45 Stecker dieses Kabels muss gemäß der Belegung EIA/TIA T568B
angeschlossen sein (siehe Anlage Seite xx.)
Achten Sie darauf, dass die CAT5e/6 Kabelanschlüsse des Senders und Empfängers
(CAT5e-1 en CAT5e-2) miteinander korrespondieren.
5. Schließen Sie den Speisungsadapter [5] an den "DC/5V" Anschluss des
MegaView60 Empfängers an (HDMI Receiver) an und stecken Sie den Adapter in
eine Steckdose.
6.1 Anwendung
1. Schalten Sie die HDMI Quelle ein (z.B. HD Set Top Box oder Multimedia PC).
2. Schalten Sie das Wiedergabegerät ein (z.B. HD-Fernseher oder Projektor) und
wählen Sie den richtigen Eingang. Zumeist müssen Sie dazu die A/V oder die
EXT Taste Ihrer Fernbedienung drücken.
3. Sie empfangen vom angeschlossenen A/V Gerät sofort Bild.
CAT5e-2
CAT5e-1
HDMI
HDMI
12
3 & 4
5
HDTV
Blu-ray player
MediaCenter PC
HD Settop box
HD TRANS MI TTER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
HD RECEIVER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
© MARMITEK
12
7 Häufig gestellte Fragen (FAQs)
Bild und Ton schlecht oder gar nicht anwesend
Überprüfen Sie, ob die CAT5e/6 Kabel auf richtige Art und Weise zwischen dem
MegaView60/61 Sender und Empfänger angeschlossen sind (CAT5e-1 an
CAT5e-1 und CAT5e-2 an CAT5e-2)
Überprüfen Sie, ob das A/V Gerät eingeschaltet ist.
Verwenden Sie, wie in Kapitel 3, Anforderungen, erläutert, nur CAT5e/CAT6
Kabel.
Prüfen Sie, ob das CAT5e/CAT6 Kabel eine gute Verbindung herstellt (keine
Bruchstellen).
Prüfen Sie, ob der RJ-45 Anschluss gemäß der EIA/TIA T568B Norm
angeschlossen ist. Siehe Anlage Seite 2
Überschreiben Sie die maximale Kabellänge nicht.
Installieren Sie Ihr System möglichst nicht nahe RF Quellen (drahtlose Geräte).
Wählen Sie eine niedrigere Auflösung an Ihrer HDMI Quelle; möglicherweise kann
das verwendete CAT5e/6 Kabel die Bandbreite höherer Auflösungen nicht
bewältigen.
Sie haben noch Fragen, die in den obigen Beispielen nicht beantwortet wurden?
Schauen Sie dann unter www.marmitek.com
8 Technische Daten
Auflösung
Unterstützte HDTV Auflösungen 480p, 576i, 576p, 720p, 1080i, 1080p
Single Link Bitrate (max.) 1.65 Gbps
Unterstützte Standards HDMI DVI, HDCP
Sender
HDMI Eingang (19-Buchsenkontakt) 1 HDMI
Videosignaleingang 0.5 1.0V p-p
DDC Signaleingang 5V p-p
Empfänger
HDMI Ausgang (19-Buchsenkontakt) 1 HDMI
Videoausgang HDMI 1.2a
Höchstlänge CAT5e/6 Kabel 60m bei 480p und 30m bei 1080p
Gehäuse Sender/Empfänger
Maßangaben (H x B x D) 45mm x 25mm x 81mm
Gewicht 246g
Umgebung
Umgebungstemperatur +0 to +70° C
Relative Feuchte 10% bis 85%
Speisung
Input 100-240VAC @50-60Hz
Output 5VDC 2A
Spezifikationen können ohne vorhergehende Mitteilung geändert werden.
MegaView 60
13
DEUTSCH
9 Hinweis
9.1 Konformitätserklärung
Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes
MegaView 60™ mit den grundlegenden Anforderungen und den anderen
relevanten Festlegungen der Richtlinien:
Richtlinie 2014/30/EU des Europäischen Parlaments und des Rates vom 26. Februar
2014 zur Harmonisierung der Rechtsvorschriften der Mitgliedstaaten über die
elektromagnetische Verträglichkeit (Neufassung).
Richtlinie 2014/35/EU des Europäischen Parlaments und des Rates vom 26. Februar
2014 zur Harmonisierung der Rechtsvorschriften der Mitgliedstaaten über die
Bereitstellung elektrischer Betriebsmittel zur Verwendung innerhalb bestimmter
Spannungsgrenzen auf dem Markt.
Richtlinie (EU) 2017/2102 des Europäischen Parlaments und des Rates vom 15.
November 2017 zur Änderung der Richtlinie 2011/65/EU zur Beschränkung der
Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten.
Verordnung (EU) 2019/1782 der Kommission vom 1. Oktober 2019 zur Festlegung von
Ökodesign-Anforderungen an externe Netzteile gemäß der Richtlinie 2009/125/ EG
des Europäischen Parlaments und des Rates und zur Aufhebung der Verordnung (EG)
Nr. 278/2009 der Kommission.
Sie können die vollständige Konformitätserklärung unter http://www.marmitek.com
lesen.
9.2 Recycling
Umweltinformation für Kunden innerhalb der Europäischen Union und
anderen europäischen Ländern mit einem separaten Sammelsystem für
diese Geräte.
Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses
Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einer
Annahmestelle für das Recycling von elektrischen und elektronischen Geräten
abgegeben werden muss. Es liegt in Ihrer Verantwortung, dieses Gerät und andere
elektrische und elektronische Geräte über die dafür zuständigen und von der
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen
für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere
Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die
örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei
dem Sie das Produkt erworben haben.
© MARMITEK
14
9.3 Urheberrechte
Marmitek BV ist ein Warenzeichen von Germatron BV. MegaView 60™ ist ein
Warenzeichen von Marmitek BV Alle Rechte vorbehalten. Weitergehende Ansprüche sind
ausgeschlossen, insbesondere übernimmt Marmitek BV keine Gewähr für die Richtigkeit
des Inhalts dieses Handbuchs. Urheber- und andere Eigentumsrechte am Inhalt
(einschließlich aber nicht beschränkt auf, Modellnummern, Software, Audio, Video, Text und
Fotos begrenzt) liegt bei Marmitek BV. Jegliche Nutzung von Inhalten, aber ohne
Begrenzung, Verteilung, Vervielfältigung, Änderung, Anzeige oder Übermittlung ohne die
vorherige schriftliche Erlaubnis von Marmitek ist strengstens untersagt. Alle Urheber- und
andere Eigentumsrechte muss auf allen Reproduktionen beibehalten werden. Die Rechte
an anderen in diesem Handbuch erwähnten Marken und Produktnamen können bei ihren
Inhabern liegen und werden hiermit anerkannt. Die Nennung von Produkten, die nicht von
Marmitek sind, dient ausschließlich Informationszwecken und stellt keine Werbung dar.
Marmitek übernimmt hinsichtlich der Auswahl, Leistung oder Verwendbarkeit dieser
Produkte keine Gewähr.
Marmitek BV PO Box 4257 - 5604 EG Eindhoven - Niederlande
MegaView 60
15
FRANÇAIS
1 Table des matières
1 Table des matières............................................................................................... 15
2 Consignes de sécurité .......................................................................................... 15
3 Introduction .......................................................................................................... 16
4 Contenu de l’emballage ....................................................................................... 16
5 Exigences câble CAT5e/CAT6e ........................................................................... 16
6 Installation ............................................................................................................ 17
6.1 Utilisation ............................................................................................................. 17
7 Foire aux questions (FAQ) ................................................................................... 18
8 Spécifications techniques ..................................................................................... 18
9 Notification ........................................................................................................... 19
9.1 Déclaration de conformité .................................................................................... 19
9.2 Recyclage ............................................................................................................ 19
9.3 Droits d'auteur ...................................................................................................... 20
2 Consignes de sécurité
Veuillez lire attentivement ce manuel d’utilisation avant d’utiliser l’appareil et
conservez-le pour consultation ultérieure si nécessaire.
Afin d'éviter un court-circuit, ce produit ne doit être utilisé qu'à l'intérieur, et
uniquement dans des endroits secs. Ne pas exposer les composants à la pluie ou
à l'humidité. Ne pas utiliser à côté de ou près d'une baignoire, une piscine, etc.
Ne pas exposer les composants de votre système à des températures
extrêmement élevées ou à des sources de lumières trop fortes.
Toute utilisation impropre, toute modification ou réparation effectuée vous-même
annule la garantie. Marmitek n’accepte aucune responsabilité dans le cas d’une
utilisation impropre du produit ou d’une utilisation autre que celle pour laquelle le
produit est destiné. Marmitek n’accepte aucune responsabilité pour dommage
conséquent, autre que la responsabilité civile du fait des produits.
Ce produit n’est pas un jouet et doit être rangé hors de la portée des enfants.
Ne jamais ouvrir le produit: Les appareils peuvent comprendre des composants
dont la tension est mortelles Les réparations ou l'entretien ne doivent être
effectués que par des personnes compétentes.
Brancher l’adaptateur secteur sur le réseau électrique seulement après avoir
vérifié que la tension d’alimentation correspond à la valeur indiquée sur les
plaques d’identification. Ne jamais brancher un adaptateur secteur ou un cordon
d’alimentation lorsque celui-ci est endommagé. Dans ce cas, veuillez contacter
votre fournisseur.
© MARMITEK
16
3 Introduction
Nous vous félicitons d’avoir choisi Marmitek MegaView 60! MegaView 60 rend possible
de façon simple de prolonger un signal HDMI (High Definition Multimedia Interface) ou
DVI (Digital Visual Interface) sur deux câbles CAT5e/6 Ethernet. La longueur maximale
du câble CAT5e/6 est de 30 mètres pour une résolution 1080p et 60 mètres pour une
résolution 480p. Les appareils qui peuvent être raccordés sont par exemple un set-top
box HD, un PC media centre, un lecteur HD-Media, un lecteur Blu-Ray ou une console
de jeux.
Les produits de Marmitek ont été produits avec beaucoup de soin et sont de haute
qualité. Veuillez lire ce mode d’emploi avec attention et suivre les instructions afin de
bénéficier au maximum des possibilités de ce produit.
4 Contenu de l’emballage
1x émetteur (HDMI Transmitter)
1x récepteur (HDMI Receiver)
1x adaptateur secteur
1x guide utilisateur
5 Exigences câble CAT5e/CAT6e
câble UTP-, FTP- ou STP
24AWG ou moins
paire torsadée solide
100 ohms à 1 MHz
connexion RJ-45 selon la norme EIA/TIA T568B
Au lieu d’un câble CAT5e on peut utiliser un câble CAT6 (de meilleure qualité). Afin de
rendre la qualité de transmission optimale utilisez un câble paire torsadées solide CAT-
5e ou CAT-6.
MegaView 60
17
FRANÇAIS
6 Installation
Pour contrôler le bon fonctionnement du système nous conseillons de tester d’abord le
montage avec des longueurs de câble CAT-5e/6 courtes.
1. Débranchez tous les appareils avant de commencer à raccorder.
2. Raccordez la source HDMI (lecteur HD-DVD, lecteur Blu-Ray Disc, HD set-top
box, console de jeux, etc.) à l’émetteur MegaView 60 [1] à l’aide du câble HDMI
(non livré).
3. Raccordez le récepteur MegaView 60 sur votre appareil de reproduction [2] (par
exemple votre HDTV ou projecteur) à l’aide du câble HDMI (non livré).
4. Utilisez deux câbles CAT5e/6 Ethernet afin de relier entre eux l’émetteur et le
récepteur de MegaView60 [3 & 4].
* Le bouchon RJ45 de ces câbles doit être raccordé selon les normes EIA/TIA T568B,
voir l’annexe page xx.
Attention : veillez à ce que les raccordements de l’émetteur et du récepteur du câble
CAT5e/6 (CAT5e-1 en CAT5e-2) correspondent.
5. Raccordez l’adaptateur d’alimentation [5] sur le raccordement « DC/5V » du
récepteur MegaView 60 (Récepteur HDMI) et branchez l’adaptateur dans une
prise.
6.1 Utilisation
1. Allumez la source HDMI (par exemple set-top box HD ou PC Multi media).
2. Allumez l’appareil de reproduction (par exemple TV ou projecteur) et sélectionnez
la source. En général, vous appuyez sur « A/V » ou « EXT » de votre
télécommande pour la sélectionner.
3. L’image de l’appareil A/V s’affiche immédiatement.
CAT5e-2
CAT5e-1
HDMI
HDMI
12
3 & 4
5
HDTV
Blu-ray player
MediaCenter PC
HD Settop box
HD TRANSMI TTER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
HD RECEIVER
HDMI E XTE NDER OVER CAT5e/6 | 1080p
© MARMITEK
18
7 Foire aux questions (FAQ)
Image et son sont mauvais ou absents
Vérifiez que les câbles CAT5e/6 soient correctement raccordés entre l’émetteur et
le récepteur MegaView60/61 (CAT5e-1 sur CAT5e-1 et CAT5e-2 sur CAT5e-2).
Vérifiez si l’appareil A/V est allumé.
Utilisez uniquement le câble CAT5e/CAT6 comme spécifié en chapitre 3.
Exigences.
Vérifiez si le câble CAT5e/CAT6 réalise la connexion (pas de cassures).
Vérifiez si RJ-45 est connectée selon la norme EIA/TIA T568B Voir annexe page
XX
Assurez-vous que la longueur maximale du câble n’est pas dépassée.
Évitez d’installer votre système près de sources RF (appareils sans fils).
Réglez une résolution inférieure sur votre source HDMI, le câble CAT5e/6 utilisé
peut ne pas être capable de gérer la bande passante de résolutions supérieures.
Vous avez d’autres questions ? Allez sur le site www.marmitek.com.
8 Spécifications techniques
Résolution
Résolutions soutenues HDTV 480p, 576i, 576p, 720p, 1080i, 1080p
Débit binaire liaison simple (max.) 1.65 Gbps
Standards soutenues HDMI DVI, HDCP
Émetteur
Entrée HDMI (code 19 femelle) 1 HDMI
Entrée signal vidéo 0.5 1.0V p-p
Entrée signal DDC 5V p-p
Récepteur
Sortie HDMI (code 19 femelle) 1 HDMI
Sortie vidéo HDMI 1.2a
Longueur de câble maximale CAT5e/6 60 m pour 480p et 30 m pour 1080p
Encasement émetteur/récepteur
Mesures (H x L x P) 45mm x 25mm x 81mm
Poids 246g
Environnement
Température ambiante +0 jusqu’à +70° C
Humidité atmosphérique 10 % à 85 %
Alimentation
Entrée 100-240VAC @50-60Hz
Sortie 5VDC 2A
Spécifications peuvent être modifiées sans préavis.
MegaView 60
19
FRANÇAIS
9 Notification
9.1 Déclaration de conformité
Par la présente Marmitek BV déclare que l'appareil MegaView 60™ est
conforme aux exigences essentielles et aux autres dispositions pertinentes
des directives:
Directive 2014/30/UE du Parlement européen et du Conseil du 26 février 2014 relative
à l’harmonisation des législations des États membres concernant la compatibilité
électromagnétique (refonte).
Directive 2014/35/UE du Parlement Européen et du Conseil du 26 février 2014 relative
à l’harmonisation des législations des États membres concernant la mise à disposition
sur le marché du matériel électrique destiné à être employé dans certaines limites de
tension
Directive (UE) 2017/2102 du Parlement Européen et du Conseil du 15 novembre 2017
modifiant la directive 2011/65/UE relative à la limitation de l'utilisation de certaines
substances dangereuses dans les équipements électriques et électroniques.
Règlement (UE) 2019/1782 de la Commission du 1er octobre 2019 établissant des
exigences d’écoconception pour les sources d’alimentation externe en vertu de la
directive 2009/125/CE du Parlement européen et du Conseil et abrogeant le règlement
(CE) no 278/2009 de la Commission
Vous pouvez lire la déclaration de conformité complète à http://www.marmitek.com
9.2 Recyclage
Informations environnementales pour les clients de l’Union européenne et
aux autres pays européens disposant de systèmes de collecte sélective.
Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit
ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de
collecte approprié pour le recyclage des équipements électriques et électroniques. Il
est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique
ou électronique par les moyens de collecte indiqués par le gouvernement et les
pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et
due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits
sur l’environnement et la santé publique. Pour plus d’informations sur le mode
d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs
publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté
le produit.
© MARMITEK
20
9.3 Droits d'auteur
Marmitek est une marque déposée de Germatron BV. MegaView 60™ est une marque
déposée de Marmitek BV. Tous droits réservés. Tout a été mis en œuvre pour que les
informations présentées dans ce manuel soient exactes. Marmitek n’est pas
responsable des erreurs de reproduction ou d’impression. Les droits d'auteur et tout
autres droits de propriété concernant le contenu (comprenant mais pas limités aux
numéros de modèle, logiciels, audio, vidéo, textes et photos) appartiennent à Marmitek
B.V. Toute utilisation du contenu, mais sans restriction, concernant la distribution, la
reproduction, toute modification, la publication ou la diffusion est strictement interdite
sans l'autorisation préalable par écrit de Marmitek. Tous les droits d'auteur et autres
droits de propriété doivent être respectés pour toutes reproductions. Les autres noms
de produits et de sociétés peuvent être des marques de leurs détenteurs respectifs.
Les produits commercialisés par des entreprises tierces ne sont mentionnés que pour
information, sans aucune intention de préconisation ni de recommandation. Marmitek
décline toute responsabilité quant à l’utilisation et au fonctionnement de ces produits.
Marmitek BV - Boîte postale 4257 - 5604 EG Eindhoven
Pays-Bas
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Marmitek MegaView 60 Manuale utente

Categoria
Interruttori video
Tipo
Manuale utente