Hardware-Manual • Doc.-No.: I.2306.21 / Rev. 3.5
CPCI-405
Page 6 of 57
Contents
Page
1. Overview ....................................................................8
1.1 Description of the CPCI-405 Board ............................................8
1.2 PCB View with Connector Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.3 Summary of Technical Data ................................................. 11
1.3.1 General Technical Data............................................... 11
1.3.2 CompactPCI Bus....................................................12
1.3.3 Microprocessor and Memory ..........................................12
1.3.4 Serial Interfaces.....................................................13
1.3.5 CAN-Interfaces .....................................................13
1.3.6 ETHERNET Interface................................................14
1.3.7 CompactFlash Card Interface ..........................................14
1.3.8 Software Support....................................................14
2. Front Panel View with LED-Display ............................................15
2.1 LEDs in the Front Panel ....................................................15
3.1 PowerPC Microcontroller PPC405GPr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1.1 General ...........................................................17
3.1.2 Address Assignment .................................................18
3.1.3 Interrupt Settings....................................................19
3.2 Serial Interface............................................................20
3.2.1 Default Setting .....................................................20
3.2.2 Configuration ......................................................20
3.2.3 Connecting the RS-232-Interface SER 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.4 Connecting the Serial Interface SER 1 with TTL-Level . . . . . . . . . . . . . . . . . . . . . . 21
3.3 Function of Coding Switch ..................................................22
3.3.1 Overview..........................................................22
3.3.2 Switching the Boot-Flash-EPROM via Coding Switch Bit 4 . . . . . . . . . . . . . . . . . . 22
3.4 CAN/DeviceNet Unit ......................................................23
3.4.1 General ...........................................................23
3.4.2 Interface Circuits....................................................24
4. Connector Assignment ........................................................25
4.1 Serial Interfaces ...........................................................25
4.1.1 SER 0: Assignment of the RJ12 Socket X700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.1.2 SER 0: Connection Cable RJ12-DSUB9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.1.3 SER 0: DSUB-Socket when Using the Adapter Cable RJ12-DSUB9 . . . . . . . . . . . 27
4.1.4 SER 1: Assignment of the 6-pin Post Connector X710 . . . . . . . . . . . . . . . . . . . . . . 28
4.2 CAN-Bus Interface (X1000) .................................................29
4.3 CAN-TTL Signals (X1010)..................................................30
4.4 Option: DeviceNet-Adapter Boards ...........................................31
4.5 ETHERNET 10/100BASE-T Connection (X1200) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.6 Debug Port X720..........................................................35
4.6.1 Signal Alignment of the 16-pole SMD-Strip and JTAG-Adapter (PCB-Rev. 1.x) . . 35
4.6.2 Signal Alignment of 8-pole SMD-Strip and JTAG-Adapter (from PCB-Rev. 2.x) . 36
5. Special Designs: CPCI-405 with CPCI-CAN-ISO11898 Add-On .....................37
5.1 CPCI-405-2 PowerPC Host with 8 HP Front Panel (I.2306.49) . . . . . . . . . . . . . . . . . . . . . 37
5.1.1 Front Panel view of CPCI-405-2 with Adapter Board and 8 HP Front Panel . . . . . 38