Juniper J6350 Getting Started Manual

J4350 and J6350 Services Router

Getting Sta

rted Guide

Release 8.1

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Part Number : 530-016824-01, Revision 1

This product includes the Envoy SNMP Engine, developed by Epilogue Techno logy, an Integrated Systems Company. Copyright

at private expense, and no part of them is in the public domain.

This product in

This product includes FreeBSD software developed by the University of California, Berkeley, and its co n tributors. All of the documentation and

3.0 by Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s HELLO routing

This product i

Juniper Networks, the Juniper Networks logo, N etScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the

United States and other countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks,

registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to

change, modify, transfer, or otherwise revise this publication without notice.

Products mad

e or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are

owned by or li

censed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,

6,429,706, 6

,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

J4350 and J6350 Services Router Getting Started Guide, Release 8.1

Writing: Nid

hi Bhargava, Michael Bushong, Maya Devi, Taffy Everts, Walter Goralski, Joshua Kim, Jerry Isaac, Archana Maheshwari, Hareesh Kumar

Kozhippura

th Narayana Panicker, Laura Phillips, Cheryl Potter, Frank Reade, Swapna Steiger, Selvakumar T. S., Alan Twhigg, and Keldyn West

Editing: Taf

fy Everts and Stella Hackell

Illustratio

n:FaithBradfordBrownandNathanielWoodward

Cover Design

: Edmonds Design

Revision History

13 October 2006—Revision 1.

The information in this document is current as of the date listed in the revision history.

YEAR 2000 NO

TICE

Juniper Networks hardware and software products are Year 2000 compliant. The JUNOS software has no known time-related limitations through the year

2038. However, the NTP application is known to have some difficulty in the year 2036.

SOFTWARE LICENSE

The terms an

d conditions for using this software are described in the software license contained in the acknowledgment to your purchase order or, to the

extent app

licable, to any reseller agreement or end-user purchase agreement executed b etween you and Juniper Networks. By using this software, you

indicate t

hat you understand and agree to be bound by those terms and conditions. Generally speaking, the software license restricts the manner in

which you a

re permitted to use the software and may contain prohibitions against certain uses. The software license may state conditions under

which the l

icense is automatically terminated. You should consult the license for further details. For complete product documentation, please see the

Juniper N

etworks Web site at www.juniper.net/techpubs.

End User License Agreement

READ THIS END US

ER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR US ING THE SOFTWARE. BY DOWNLOADING,

INSTALLING, O

R USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER

OR IF YOU ARE NO

T THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO B IND THE CUSTOMER) CONSENT TO BE BOUND BY THIS

AG REEMENT. IF

YOU D O NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE

SOFTWARE, AN

D (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.

1. The Partie

s. The parties to this Agreement are Juniper Networks, Inc. and its subsidiaries (collectively “Juniper”), and the person or organization that

originally p

urchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the S oftware (“Customer”) (collectively, the “Parties”).

2. The Softwa

re. In this Agreement, “Software” means the program modules and f eatures of the Juniper or Juniper-supplied software, and updates and

releases of

such software, for which Customer has pai d the applicable license or support fees to Juniper or an authorized Juniper reseller. “Embedded

Software” m

eans Software which Juniper has embedded in the Juniper equipment.

3. License G

rant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a

non-exclus

ive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:

a. Custome

r shall use the Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from

Juniper or

an authorized Juniper reseller.

b. Custome

r shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer

has paid th

e applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall

use such So

ftware on a single computer containing a single physical random access memory space and containing any number of processors. Use of

the Steel

-Belted Radius software on multiple computers requires mu ltiple licenses, regardless of w h ether such c omputers are physically contained on a

single ch

assis.

c. Produc

t purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specify limits to

Custome

r’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent users, sessio n s, calls,

connect

ions,subscribers,clusters,nodes,realms,devices,links,portsortransactions,orrequirethepurchaseofseparatelicensestouseparticularfeatures,

functio

nalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing,

tempor

al, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the

Softwa

re to be used only in conjunction with other specific Software. Customer’s use of the Software shall be subject to all such limitations and purchase

of all a

pplicable licenses.

d. For a

ny trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the Software. Customer

may op

erate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional

trial

period by re-installing the Software after the 30-day trial period.

e. The

Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s enterprise network.

Speci

fically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support

any c

ommercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable

license(s)fortheSoftwarefromJuniperoranauthorizedJuniperreseller.

4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall

not: (a) modify, unbundle, reverse engineer, or create derivative works base d on the Software; (b) make unauthorized copies of the Software (except as

necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove any

proprietary notices, labels, or marks on or in any copy of the Software or any product in w hich the Software is embedded; (e) distribute any copy of the

Software to any third party, including as may be embedded in Juniper equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted

feature, function, service, application, operation, o r capability without first purchasing the applicable lice nse(s) and obtaining a valid key from Juniper, even

if such featu re, function, s ervice, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper

to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized

Juniper reseller; (i) use the Embedded So ftware on non-Juniper equipment; (j) use the Software (or make it available for use) on Juniper equipment thatthe

Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to

any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein.

5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall

furnish such records to Juniper and certify its compliance with this Agreement.

6. Confidentiality. The Parties agree that aspects of t he Software and associated documentation are the confidential property of Juniper. As such, Customer

shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes

restricting access to the Software to Customer employees and contractors having a need to use the Software for Customer’s internal business purposes.

7. Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software,

associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in

the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.

8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statement

that accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support the Software. Support

services may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT

PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, OR C OSTS OR PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER

OR JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHO RIZED OR IMPROPER USE OF

ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY

LAW, JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE),

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES

JUNIPER WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR

INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’ or licensors’ liability to

Customer, whether in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave

rise to the claim, or if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges

and agrees tha t Juniper has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liabilityset

forth herein, that the same reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and

cause consequential loss), and that the same form an essential basis of the bargain between the Parties.

9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the

license granted herein. U pon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in

Customer’s possession or control.

10. Taxes. All license fees for the Software are exclusive of taxes, withholdings, duties, or levies (collectively “Taxes”). Customer shall be responsible

for paying Taxes arising from the purchase of the license, or importation or use of the Software.

11 . Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign

agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or

without all necessary approvals. Customer shall be liable for any such violations. The version o f the Software supplied to Customer may contain encryption

or other capabilities restricting Customer’s ability to export the Software without an export license.

12. Commercial Co mputer Software. The Software is “commercial computer software” and is provided with restricted rights. Use, duplication, or

disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4,

FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13. Interface Information.To the extent required by applicable law, and at Customer’s written request, Juniper shall provide Customer with the

interface information needed to achieve interoperability between the Software and another independently created program, on payment of applicable

fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance

with any a pplicable terms and conditions u pon which Juniper makes such information available.

14. Third Party Software.Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology

are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor

shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the

Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and

subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License

(“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate)

available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc.,

1194 N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a

copy of the LGPL at http://www.gnu .org/licenses/lgpl.html.

15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The

provisions of the U.N. Convention for the International Sale of Goods shall not apply to t his Agreement. For any disputes arising under this Agreement,the

Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California.

This Agreement constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and

contemporaneous agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except

that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are

inconsistent or conflict with terms co ntained herein. No modification to this A greement nor any waiver of any rights hereunder shall be effective unless

expressly assented to in writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not

affect the validity of the remainder of thi s Agreement. This Agreement an d associated documentation has been written in the English language, and

the Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de même

que tous les documents y compris tout avis qui s’y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that this Agreement

and all related documentation is and will be in the English language)).

,

Abbreviated

Table of Contents

About This G

uide

xv

Part 1

J-series Overview

Chapter 1 Ov

erview of J4350 and J6350 Services Routers .. 3

Chapter 2 S

ystem Overview .. 9

Chapter 3 P

hysical Interface Modules Overview .. 27

Chapter 4 S

ervices Router User Interface Overview .. 49

Part 2

Installin

g a Services Router

Chapter 5 Preparing for Router Installation .. 71

Chapter 6 Installing and Connecting a Services Router .. 81

Chapter 7 Establishing Basic Connectivity .. 93

Chapter 8 Configuring Secure Web Access .. 115

Chapter 9 Configuring Autoinstallation.. 125

Chapter 10 Installing and Managing J-series Licenses.. 131

Part 3

Maintaining Services Router Hardware

Chapter 11 Replacing and Troubleshooting Hardware Components .. 143

Chapter 12 Contacting Customer Support and Returning Hardware .. 175

Abbreviated Table of Contents v

J4350 and J6350 Services Router Getting Started Guide

Part 4

J-series Requ

irements and Specifications

Chapter 13 Network Cable Specifications and Connector Pinouts .. 185

Chapter 14 Safety and Regulatory Compliance Information.. 201

Part 5

Index

vi Abbreviated Table of Contents

Table of Cont

ents

About This G

uide

xv

Objectives ........................................................................... xv

Audience.............................................................................xvi

Document Conventions ............................................................xvi

Related Juniper Networks Documentation...................................... xviii

Documentation Feedback.......................................................... xx

Requesting Support................................................................. xx

Part 1

J-series Overview

Chapter 1 Overview of J

4350 and J6350 Services Routers

3

J4350 Services Router Overview ....................................................4

J6350 Services Router Overview ....................................................4

J-series Software Features and Licenses.............................................5

Chapter 2 System Overview

9

J4350 and J6350 Services Router Hardware Features .............................9

Chassis............................................................................9

Midplane........................................................................ 14

Routing Engine.................................................................14

Boot Devices............................................................... 15

Front Panel ..................................................................... 15

Physical Interface Modules (PIMs) ....................................... 16

Power Button and POWER LED..........................................17

STATUS LED................................................................ 18

ALARM LED................................................................ 18

HA LED..................................................................... 19

RESET CONFIG Button.................................................... 19

Built-In Gigabit Ethernet Ports............................................19

Console Port............................................................... 20

AUX Port ...................................................................20

USB Port ................................................................... 20

J4350 Power System........................................................... 21

J6350 Power System........................................................... 21

Cooling System................................................................. 22

Software Overview .................................................................23

Routing Engine and Packet Forwarding Engine ............................. 24

Table of Contents vii

J4350 and J6350 Services Router Getting Started Guide

Kernel and Microkernel........................................................24

JUNOS Software Processes ...................................................24

User Interfaces ................................................................ 25

Chapter 3 Physical Interface Modules Overview

27

PIM Terms........................................................................... 27

Field-Replaceable PIMs............................................................. 29

Field-Replaceable PIM Summary ............................................. 30

Gigabit Ethernet ePIMs........................................................ 31

Dual-Port Serial PIM ........................................................... 34

Dual-Port T1 or E1 PIM ....................................................... 35

Dual-Port Channelized T1 or E1 PIM ......................................... 36

T3 or E3 PIM ................................................................... 38

Dual-Port Fast Ethernet PIM .................................................. 40

4-Port Fast Ethernet ePIM .................................................... 41

4-Port ISDN BRI PIMs..........................................................42

ADSL PIM.......................................................................44

G.SHDSL PIM .................................................................. 46

Chapter 4 Services Router User Interface Overview

49

User Interface Ove

rview ...........................................................49

J-Web Overview ................................................................ 49

CLI Overview ................................................................... 50

Comparison of Conf

iguration Interfaces .....................................50

Before You Begin....................................................................52

Using the J-Web Int

erface ..........................................................52

Starting the J-Web

Interface ................................................... 53

J-Web Layout ...................................................................53

J-Web Sessions ................................................................. 58

Using the Command-

Line Interface ............................................... 58

CLI Command Hierarc

hy ...................................................... 58

Starting the CLI................................................................. 59

CLI Operational Mod

e ......................................................... 60

CLI Configuration M

ode ....................................................... 61

CLI Basics....................................................................... 62

Editing Keystrokes

........................................................ 62

Command Completion

................................................... 63

Online Help................................................................63

Configurin g the CLI E

nvironment........................................ 65

Part 2

Installing a Servic

es Router

Chapter 5 Preparing for Router Installation

71

General Site Guidelines............................................................. 71

Rack Requirements................................................................. 72

viii Table of Contents

Table of C ontents

Rack Size and Strength ........................................................ 72

Connection to Building Structure ............................................. 73

Router Environmental Tolerances ................................................. 73

Fire Safety Requirements ..........................................................73

Fire Suppression ............................................................... 74

Fire Suppression Equipment .................................................. 74

Power Guidelines, Requirements, and Specifications ............................74

Site Electrical Wiring Guidelines..............................................75

Signaling Limitations...................................................... 75

Radio Frequency Interference............................................ 75

Electromagnetic Compatibility........................................... 75

Router Power Requirements .................................................. 76

AC Power, Connection, and Power Cord Specifications ..................... 76

DC Power, Connection, and Power Cable Specifications.................... 77

Network Cable Specifications...................................................... 78

ISDN Provisioning .................................................................. 79

Site Preparation Checklist.......................................................... 79

Chapter 6 Installing and Connecting a Services R outer

81

Before You Begin.................................................................... 81

Unpacking a J-series Services Router.............................................. 82

Installing a J4350 and J6350 Services Router .................................... 83

Connecting Interface Cables to a Services Router................................ 85

Chassis Grounding.................................................................. 86

Connecting Power ..................................................................86

Connecting AC Power.......................................................... 86

Connecting DC Power .........................................................88

Powering a Services Router On and Off ..........................................90

Chapter 7 Establishing Basic Connectivity

93

Basic Connectivity Terms ..........................................................93

Basic Connectivity Overview ......................................................94

Router Identification...........................................................95

Root Password.................................................................. 95

Time Zone and System Time ................................................. 95

Network Settings...............................................................96

Default Gateway................................................................ 96

Backup Router..................................................................96

Loopback Address.............................................................. 96

Built–In Ethernet Interface Address ..........................................97

Management Access ........................................................... 97

Before You Begin....................................................................98

Connecting to a Services Router................................................... 99

Connecting to the J-Web Interface............................................ 99

Connecting to the CLI Locally................................................101

Connecting to the CLI Remotely .............................................103

Configuring the Modem at the Router End.............................103

Connecting the Modem to the Console Port ...........................104

Connecting to the CLI at the User End .................................104

Configuring Basic Settings with J-Web Quick Configuration....................105

Table of Contents ix

J4350 and J6350 Services Router Getting Started Guide

Configuring Basic Settings with a Configuration Editor.........................108

Verifying Basic Connectivity ...................................................... 113

Displaying Basic Connectivity Configurations .............................. 113

Chapter 8 Configuring Secure Web Access

115

Secure Web Access Terms......................................................... 115

Secure Web Access Overview..................................................... 116

Before You Begin................................................................... 117

Generating SSL Certificates .................................................. 117

Configuring Secure Web Access with Quick Configuration..................... 117

Configuring Secure Web Access with a Configuration Editor...................121

Verifying Secure Web Access......................................................122

Displaying an SSL Certificate Configuration ................................122

Displaying a Secure Access Configuration ..................................123

Chapter 9 Configuring Autoinstallation

125

Autoinstallation Terms.............................................................125

Autoinstallation Overview.........................................................126

Autoinstallation Interfaces....................................................126

Autoinstallation Process on Services Router ................................126

Automatic Configuration of a New Services Router........................127

Before You Begin...................................................................127

Configuring Autoinstallation with a Configuration Editor.......................128

Verifying Autoinstallation..........................................................129

Verifying Autoinstallation Status .............................................129

Chapter 10 Installing and Managing J-series Licenses

131

J-series License Overview .........................................................131

Software Feature Licenses....................................................131

License Key Components ....................................................132

Before You Begin...................................................................132

Managing J-series Licenses with the J-Web Interface ...........................133

Adding New Licenses with the J-Web Interface.............................134

Deleting Licenses with the J-Web Interface .................................135

Displaying License Keys with the J-Web Interface..........................135

Downloading Licenses with the J-Web Interface............................135

Managing J-series Licenses with the CLI .........................................136

Adding New Licenses with the CLI...........................................136

Deleting a License with the CLI..............................................136

Saving License Keys with the CLI............................................137

Verifying J-series License Management..........................................137

Displaying Installed Licenses.................................................137

Displaying License Usage ....................................................138

Displaying Installed License Keys............................................139

x Table of Contents

Table of C ontents

Part 3

Maintaining Se

rvices Router Hardware

Chapter 11 Replacing and Troubleshooting Hardware Components

143

Replacing Hardware Components................................................143

Tools and Parts Required .....................................................144

Replacing the Console Port Cable............................................144

Replacing a PIM...............................................................144

Removing a PIM..........................................................145

Installing a PIM...........................................................146

Replacing PIM Cables.........................................................147

Removing a PIM Cable...................................................148

Installing a PIM Cable....................................................148

Replacing the Compact Flash Disk ..........................................149

Removing and Installing the USB Storage Device ..........................153

Removing the USB Storage Device......................................154

Installing the USB Storage Device.......................................155

Removing and Installing DRAM Modules ...................................155

Removing a DRAM Module..............................................156

Installing a DRAM Module...............................................157

Replacing Power System Components ......................................158

Replacing an AC Power Supply Cord....................................159

Removing an AC Power Supply from a J6350 Router .................160

Installing an AC Power Supply in a J6350 Router......................161

Replacing a DC Power Supply Cable....................................162

Removing a DC Power Supply from a J6350 Router ..................163

Installing a DC Power Supply in a J6350 Router.......................165

Removing and Installing a Crypto Accelerator Module.....................167

Removing the Crypto Accelerator Module..............................167

Installing a Crypto Accelerator Module .................................169

Replacing an Air Filter........................................................170

Troubleshooting Hardware Components.........................................171

Chassis Alarm Conditions ....................................................171

Contacting the Juniper Networks Technical Assistance Center............173

Chapter 12 Contacting Customer Support and Returning Hardware

175

Locating Component Serial Numbers ............................................175

PIM Serial Number Label.....................................................177

J6350 Power Supply Serial Number Labels .................................177

Contacting Customer Support ....................................................178

Information You Might Need to Supply to JTAC.............................178

Return Procedure ..................................................................178

Packing a Router or Component for Shipment..................................179

Tools and Parts Required ....................................................179

Packing the Services Router for Shipment..................................180

Packing Components for Shipment .........................................181

Table of Contents xi

J4350 and J6350 Services Router Getting Started Guide

Part 4

J-series Requ

irements and Specifications

Chapter 13 Network Cable Specifications and Connector Pinouts

185

Serial PIM Cabl

e Specifications ...................................................185

RS-232 DTE Cabl

e Pinout ....................................................186

RS-232 DCE Cabl

e Pinout....................................................187

RS-422/449 (EI

A-449) DTE Cable Pinout ....................................187

RS-422/449 (EI

A-449) DCE Cable Pinout....................................188

EIA-530A DTE Ca

ble Pinout..................................................189

EIA-530A DCE Ca

ble Pinout..................................................190

V.35 DTE Cable Pi

nout........................................................191

V.35 DCE Cable Pi

nout .......................................................192

X.21 DTE Cable Pi

nout .......................................................193

X.21 DCE Cable Pi

nout .......................................................193

RJ-45 Connector

Pinout for Fast Ethernet Ports .................................194

RJ-45 Connector

Pinout for Gigabit Ethernet Ports..............................195

Console Port Pin

outs ..............................................................195

E1andT1RJ-48Cab

le Pinouts...................................................196

E3andT3BNCConne

ctor Pinout ................................................198

ADSL and G.SHDSL R

J-11 Connector Pinout.....................................199

ISDN RJ-45 C onnec

tor Pinout.....................................................199

Chapter 14 Safety and Regula

tory Compliance Information

201

Definition of Safe

ty Warning Levels..............................................201

Safety Guidelines

and Warnings..................................................203

General Safety Gui

delines and Warnings....................................203

Qualified Personn

el Warning............................................204

Preventing Electr

ostatic Discharge Damage ...........................205

Electrical Safety

Guidelines and Warnings ..................................206

General E lectrica

l Safety Guidelines ....................................207

AC Power Electrica

l Safety Guidelines ..................................208

Power Cable W arning

(Japanese)...................................208

DC Power E lectrica

l Safety Guidelines..................................209

PowerSourcesforRe

dundant Power Supplies.........................209

DC Power Disconnect

ion Warning......................................210

DC Power Grounding R

equirements and Warning..................... 211

DC Power Wiring Sequ

ence Warning...................................212

DC Power Wiring Term

inations Warning...............................213

Grounded Equipment W

arning..........................................214

Warning Statement f

or Norway and Sweden ..........................215

In Case of Electrical

Accident ...........................................215

Multiple Power Suppl

ies Disconnection Warning......................215

Power Disconnection

Warning ..........................................217

TN Power Warning.......................................................218

Telecommunication L

ine Cord Warning................................219

Installation Safety

Guidelines and Warnings................................221

Chassis Lifting Guid

elines ...............................................221

xii Table of Contents

Table of C ontents

Installation Instructions Warning .......................................221

Rack-Mounting Requirements and Warnings ..........................222

Ramp Warning ...........................................................226

Laser and LED Safety Guidelines and Warnings............................227

General Laser Safety Guidelines.........................................227

Class 1 Laser Product Warning..........................................227

Class 1 LED Product Warning ...........................................228

Laser Beam Warning.....................................................229

Radiation from Open Port Apertures Warning.........................230

Maintenance and Operational Safety Guidelines and Warnings ..........231

Battery Handling Warning...............................................232

Jewelry Removal Warning ...............................................233

Lightning Activity Warning ..............................................235

Operating Temperature Warning........................................236

Product Disposal Warning...............................................238

Agency Approvals..................................................................240

Compliance Statements for Environmental Requirements.....................241

Lithium Battery................................................................241

Compliance Statements for EMC Requirements ................................241

Canada.........................................................................241

European Community ........................................................243

Japan...........................................................................244

Taiwan .........................................................................244

United States ..................................................................244

FCC Part 15 Statement...................................................245

FCC Part 68 Statement...................................................245

Product Reclamation and Recycling Program...................................246

Part 5

Index

Index................................................................................249

Table of Contents xiii

J4350 and J6350 Services Router Getting Started Guide

xiv Table of Contents

About This Gu

ide

This preface provides the following guidelines for using the J435 0 and J6350 Services

Router Getting Started Guide:

Objectives on page xv

Audience on

page xvi

Document Conventions on page xvi

Related Junip er Networks Documentation on page xviii

Documentat

ion Feedback on page xx

Requesting Support on page xx

Objectives

This guide contains an overview, basic instructions, and specifications for J435 0 and

J6350 Serv

ices Routers. It explains how to prepare your site for i nstallation, unpack

and install a Services Router and its components, power on the router, install

licenses, and establish basic connectivity.

NOTE: This

guide documents Release 8.1 of the JU NOS software. For additional

information about J-series Services Routers—either corrections to or omissions from

this guide —see the J-series Services Router Release Notes at

http://www.juniper.net.

J-series S

ervices Router operations are controlled by the JUNOS Internet software.

You direct the JUNO S software through either a Web browser or a command-line

interface (CLI) to perform the tasks shown in Table 1.

Table 1: Capabilities of J-series Interfaces

J-series Interface Capabilities

J-Web graphical browser interface Quick (basic) configuration

Monitoring, configuration, diagnosis, and

management

JUNOS CLI

Monitori

ng, configuration, diagnosis, and management

Objectives xv

J4350 and J6350 Services Router Getting Started Guide

J-series Services Router guides provide comple te instructions for using the J-Web

interface, bu

ttheyarenotacomprehensiveresourceforusingtheJUNOSCLI.

For CLI in formation, see the J U NO S software manuals listed in “Related Junipe r

Networks D ocu mentation” on page xviii.

Although the J-Web Interface User Guide provides a useful overview of the J-Web

interface, i

t contains only a subset of J-Web information. We recommend that

J-series users consult the J-series Services Router guides, instead.

Audience

This guide is designed for anyone who installs and sets up a J-series Services

Router or prepares a site for Services Router installation. The guide is intended

for the foll

owing audiences:

Customers w

ith technical knowledge o f and experience with networks and

the Internet

Network administrators who install, configure, and manage Internet routers

but are un familia r with the JU N OS software

Network administrators who install, config ure, and manage products of

Juniper Net

works

Personnel

operating the equipmen t must be trained a nd competent; must not

conduct themselves in a careless, willfully negligent, o r hostile manne r; and must

abide by the instructions provided by the documentation.

Document Conventions

Table 2 defines the notice icons used in this guide.

Table 2: Notice Icons

Icon Meaning Description

Informational note Indicates important features or

instructions.

Caution

Indicates a situation that might result in

loss of data or hardware damage.

Warning

Alertsyoutotheriskofpersonalinjury

or death.

Ta b l e 3 d

efines the text and syntax conventions used in this guide.

xvi Document Conventions

About This Guide

Table 3: Text and Syntax Conventions

Convention Description Examples

Bold sans serif typeface

Represents text that you type. To enter configuration mode, type the

configure command:

user@host> configure

Fixed-width typeface

Represents output that appears on t he

terminal scr

een.

user@host> show chassis alarms

No alarms currently active

Italic typeface

Introduces important new

terms.

Identifies book names.

Identifies RFC and Internet draft

titles.

Apolicy term is a named

structure that defines match

conditions and actions.

JUNOS System Basics

Configuration Guide

RFC 1997, BGP Communities

Attribute

Italic sans

serif typeface

Represents variables (options for which

you substitute a value) in commands or

configuration statements.

Configure the machine’s domain name:

[edit]

root@# set system d omain-name

domain-name

Sans serif typeface Represents names of configuration

statements, commands, files, and

directories; IP addresses; configuration

hierarchy levels; or labels on routing

platform components.

To configure a stub area,

include the stub statement at

the [edit protocols ospf area

area-id] hierarchy level.

The console port is labeled

CONSOLE.

< > (angle brackets) Enclose optional keywords or variables. stub <default-metric metric >;

|(pipesymbol)

Indicates a choice between the m utually

exclusive keyword s or variables on

either side of the symbol. The set of

choices is often enclosed in parentheses

for clarity.

broadcast

|multicast

( string1 | string2 | string3 )

# (pound sign) Indicates a comment specified on the

same line as the configuration statement

to which it applies.

rsvp { # Required for dynamic MPLS

only

[ ] (square brackets) Enclose a variable for which you can

substitute one or more values.

community name members [

community-ids ]

Indention and braces ( { } )

Identif

y a level in the configuration

hierarchy.

; (semicolon) Identifies a leaf statement at a

configuration h ierarchy level.

[edit]

routing

-options {

static {

route default {

nexthop a

ddress ;

retain;

}

J-Web GUI C

onventions

Document Conventions xvii

J4350 and J6350 Services Router Getting Started Guide

Convention Description Examples

Bold typeface Represents J-Web graphical user

interface (GUI) items you click or select.

In the Logical Interfaces box,

select All Interfaces.

To cancel the configuration,

click Cancel.

> (bo ld right a

ngle bracket)

Separates lev

els in a hierarchy of J-Web

selections.

In the configu

ration editor hierarchy,

select Protocols>Ospf.

Related Jun

iper Networks Documentation

J-series Se

rvices Routers are documented in mu ltiple guides. Although the J-series

guides provide instructions for configuring and managing a Services Router with the

JUNOS CLI, they are not a comprehensive JUNOS software resource . For complete

documentat

ion of the statements and commands described in J-series guides, see

the JUNOS software manuals listed in Table 4.

Table 4: J-series Guides and Related JUNOS Software Publications

Chapter in a J-series Guide Corresponding JUNOS Software Manual

Getting Started Guide for Your Router

“Services Router User Interface Overview”

“Establishing Basic Connectivity”

“Configuring Autoinstallation”

JUNOS CLI User Guide

JUNOS S ystem B asics Configuration Guide

J-series Services Router Basic LAN and WAN Access Config uration Guide

“Using Services Router Configuration Tools”

JUNOS CLI User Guide

JUNOS S ystem B asics Configuration Guide

“Interfaces Overview”

“Configuring DS1, DS3, Ethernet, and Serial Interfaces”

“Configuring Digital Subscriber Line Interfaces

“Configuring Point-to-Point Protocol over Ethernet”

“Configuring ISDN”

JUNOS Network Interfaces Configuration G uide

JUNOS Interfaces Command Reference

“Configuring Link Services Interfaces”

JUNOS Services Interfaces Configuration Guide

JUNOS System Basics and Services Command Reference

xviii Related Juniper Networks Documentation

About This Guide

Chapter in a J-series Guide Corresponding JUNOS Software Manual

“Routing Overview”

“Configuring Static Routes”

“Configuring a RIP Network”

“Configuring an OSPF Network”

“Configuring the IS-IS Protocol”

“Configuring BGP Sessions”

JUNOS Routing Protocols Configuration Guide

JUNOS Routing Protocols and Policies Command

Reference

J-series Services Router Advanced WAN Access Configuration Guide

“Multiprotocol Label Switching Overview”

“Configuring Signaling Protocols for Traffic Engineering”

“Configuring Virtual Private Networks”

“Configuring CLNS VPNs”

JUNOS MPLS Applications Configuration Guide

JUNOS Routing Protocols and Policies Command

Reference

JUNOS VPNs Configuration Guide

“Configuring IPSec for Secure Packet Exchange”

JUNOS S ystem B asics Configuration Guide

JUNOS Services Interfaces Configuration Guide

JUNOS System Basics and Services Command Reference

“Multicast Overview”

“Configuring

a Multicast Network”

JUNOS Multicast Protocols Configuration Guide

JUNOS Routing Protocols and Policies Command

Reference

“Configuring Data Link S witching”

JUNOS Services Interfaces Configuration Guide

JUNOS System Basics and Services Command Reference

“Policy Framework Overview”

“Configuring Routing Policies”

JUNOS Policy Framework Configuration Guide

JUNOS Routing Protocols and Policies Command

Reference

“Configuring NAT”

“Configuring Stateful Firewall Filters and NAT”

“Configuring Stateless Firewall Filters”

JUNOS Network Interfaces Configuration G uide

JUNOS Policy Framework Configuration Guide

JUNOS Services Interfaces Configuration Guide

JUNOS System Basics and Services Command Reference

JUNOS Routing Protocols and Policies Command

Reference

“Class-of-Service Overview”

“Configuring Class of Service”

JUNOS Class of Service Configuration Guide

JUNOS System Basics and Services Command Reference

J-series Ser vices Router Administration Guide

“Managing User Authentication and Access”

JUNOS System Basics Configuration Guide

“Configuri

ng SNMP for Network Management”

JUNOS Network Management Configuration Guide

“Configuring the Router as a DHCP Server”

JUNOS System Basics Configuration Guide

“Automating Network Operations and Troubleshooting”

JUNOS Configuration and Diagnostic Automation Guide

Related Juniper Networks Documentation xix

J4350 and J6350 Services Router Getting Started Guide

Chapter in a J-series Guide Corresponding JUNOS Software Manual

“Monitoring the Router and Routing Operations”

JUNOS System Basics and Services Command Reference

JUNOS Interfaces Command Reference

JUNOS Routing Protocols and Policies Command

Reference

“Monitoring Events and Managing System Log Files”

JUNOS System Log Messages Reference

“Configuring and Monitoring Alarms”

JUNOS System Basics Configuration Guide

“Performing Software Upgrades and Reboots”

JUNOS Installation and Upgrade Guide

“Using Services Router Diagnostic Tools”

JUNOS System Basics and Services Command Reference

JUNOS Interf

aces Command Reference

JUNOS Routing Protocols and Policies Command

Reference

“Configuring Packet Capture”

JUNOS Services Interfaces Configuration Guide

“Configuring RPM Probes”

JUNOS System Basics and Services Command Reference

Documentation Feedback

We encourage you to provide feedback, comments, and su gge stio ns so

that we can improve the documentation. You ca n send your comments to

techpubs-comments@juniper.net , or fill out the documentation feedback form at

http://www.juniper.net/techpubs/docbug/docbugreport.html. If you are using e-mail, b e

sure to include the following in formation with your com ments:

Document name

Document part number

Page number

Software release version

Requesting Support

For technical support, open a support case with the Case Manager link at

http://www.juniper.net/support/ or call 1-888-314-JTAC (from the United States,

Canada, or Mexico) or 1-408-745-9500 (from elsewhere).

xx Requesting Support

La pagina sta caricando ...

Juniper J6350 Getting Started Manual

Questo manuale è adatto anche per

Juniper J6350 Getting Started Manual

in altre lingue

Documenti correlati

Altri documenti