Intel Telephone DG33TL Manuale utente

Categoria
Schede madri
Tipo
Manuale utente

Questo manuale è adatto anche per

Intel® Desktop Board DG33TL
Product Guide
Order Number: D90031-001
Revision History
Revision Revision History Date
-001 First release of the Intel
®
Desktop Board DG33TL Product Guide April 2007
If an FCC declaration of conformity marking is present on the board, the following statement applies:
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the
user’s authority to operate the equipment.
Tested to comply with FCC standards for home or office use.
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par
le ministére des Communications du Canada.
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
®
PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended
for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
Desktop Board DG33TL may contain design defects or errors known as errata which may cause the product
to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing
your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from Intel Corporation by going to the World Wide Web site at:
http://www.intel.com/ or by calling 1-800-548-4725.
Intel, the Intel logo, Pentium, and Celeron are registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2007, Intel Corporation. All rights reserved.
iii
Preface
This Product Guide gives information about board layout, component installation, BIOS
update, and regulatory requirements for Intel
®
Desktop Board DG33TL.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.
Use Only for Intended Applications
All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.)
for use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.
Document Organization
The chapters in this Product Guide are arranged as follows:
1 Desktop Board Features: a summary of product features
2 Installing and Replacing Desktop Board Components: instructions on how to install
the Desktop Board and other hardware components
3 Updating the BIOS: instructions on how to update the BIOS
4 Configuring for RAID (Intel
®
Matrix Storage Technology): information about
configuring your system for RAID.
A Error Messages and Indicators: information about BIOS error messages and beep
codes
B Regulatory Compliance: safety and EMC regulations and product certifications
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
Intel Desktop Board DG33TL Product Guide
iv
Terminology
The table below gives descriptions of some common terms used in the product guide.
Term Description
GB Gigabyte (1,073,741,824 bytes)
GHz Gigahertz (one billion hertz)
KB Kilobyte (1024 bytes)
MB Megabyte (1,048,576 bytes)
Mbit Megabit (1,048,576 bits)
MHz Megahertz (one million hertz)
Box Contents
Intel Desktop Board DG33TL
I/O shield
One ATA-66/100 cable
Two locking Serial ATA (SATA) cables
External SATA (eSATA) Port adapter bracket
Quick Reference poster
Configuration and battery caution statement labels
Intel
®
Matrix Storage Technology Raid Driver diskette
Intel
®
Express Installer Driver and Software DVD-ROM
v
Contents
1 Desktop Board Features
Supported Operating Systems..............................................................................10
Desktop Board Components.................................................................................11
Processor..........................................................................................................13
Main Memory.....................................................................................................13
Intel
®
G33 Express Chipset .................................................................................14
Intel G33 Graphics Subsystem......................................................................15
GMA 3100 Graphics Controller...............................................................15
Digital Video Interface (DVI).................................................................16
Audio Subsystem ...............................................................................................16
Legacy Input/Output (I/O) Controller ....................................................................17
LAN Subsystem .................................................................................................17
RJ-45 LAN Connector LEDs...........................................................................17
Hi-Speed USB 2.0 Support ..................................................................................18
Enhanced IDE Interface ......................................................................................18
Serial ATA.........................................................................................................19
Serial ATA RAID .........................................................................................19
Expandability.....................................................................................................19
BIOS................................................................................................................19
Serial ATA and IDE Auto Configuration...........................................................19
PCI and PCI Express* Auto Configuration .......................................................19
Security Passwords.....................................................................................20
Hardware Management Features ..........................................................................20
Hardware Monitoring and Fan Speed Control ..................................................20
Chassis Intrusion........................................................................................21
Power Management Features ...............................................................................21
ACPI.........................................................................................................21
Hardware Support ......................................................................................21
Power Connectors ...............................................................................21
Fan Headers .......................................................................................22
LAN Wake Capabilities..........................................................................22
Instantly Available PC Technology..........................................................22
+5 V Standby Power Indicator LED ........................................................23
Wake from USB ..................................................................................23
PME# Signal Wake-up Support..............................................................23
WAKE# Signal Wake-up Support ...........................................................24
ENERGY STAR* Qualified .............................................................................24
Speaker............................................................................................................24
Battery.............................................................................................................24
Real-Time Clock.................................................................................................24
2 Installing and Replacing Desktop Board Components
Before You Begin ...............................................................................................25
Installation Precautions.......................................................................................26
Prevent Power Supply Overload ....................................................................26
Observe Safety and Regulatory Requirements.................................................26
Installing the I/O Shield ......................................................................................27
Intel Desktop Board DG33TL Product Guide
vi
Installing and Removing the Desktop Board ...........................................................28
Installing and Removing a Processor.....................................................................29
Installing a Processor ..................................................................................29
Installing the Processor Fan Heat Sink ...........................................................32
Connecting the Processor Fan Heat Sink Cable................................................33
Removing the Processor ..............................................................................34
Installing and Removing Memory..........................................................................34
Guidelines for Dual Channel Memory Configuration..........................................35
Two or Four DIMMs .............................................................................35
Three DIMMs ......................................................................................36
Installing DIMMs ........................................................................................37
Removing DIMMs........................................................................................39
Installing and Removing a PCI Express x16 Card ....................................................40
Installing a PCI Express x16 Card .................................................................40
Removing the PCI Express x16 Card..............................................................41
Connecting the IDE Cable....................................................................................42
Connecting the Serial ATA (SATA) Cables ..............................................................44
Installing the External Serial ATA Adapter Bracket ..................................................45
Connecting to the Internal Headers ......................................................................46
Connecting to the HD Audio Link Header........................................................47
Connecting to the IEEE 1394a Header ...........................................................47
Installing a Front Panel Audio Solution for Intel
®
High Definition Audio...............47
Connecting to the Consumer IR (CIR) Headers................................................48
Connecting to the Serial Port Header.............................................................49
Connecting to the Chassis Intrusion Header....................................................49
Connecting to the Alternate Front Panel Power LED Header...............................49
Connecting to the Front Panel Header............................................................50
Connecting to the USB 2.0 Headers...............................................................50
Connecting to the Flexible Audio System ...............................................................51
Connecting Chassis Fan and Power Supply Cables...................................................52
Connecting Chassis Fan Cables.....................................................................52
Connecting Supply Power Cables ..................................................................53
Setting the BIOS Configuration Jumper .................................................................54
Clearing Passwords ............................................................................................56
Replacing the Battery .........................................................................................57
3 Updating the BIOS
Updating the BIOS with the Intel
®
Express BIOS Update Utility ................................63
Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory
Update Utility...............................................................................................
64
Obtaining the BIOS Update File ....................................................................64
Updating the BIOS with the ISO Image BIOS Update File .................................64
Updating the BIOS with the Iflash Memory Update Utility .................................65
Recovering the BIOS...................................................................................66
4 Configuring for RAID (Intel
®
Matrix Storage Technology)
Configuring the BIOS for Intel Matrix Storage Technology........................................67
Creating Your RAID Set.......................................................................................67
Loading the Intel Matrix Storage Technology RAID Drivers and Software....................68
Setting Up a “RAID Ready” System.......................................................................68
Contents
vii
A Error Messages and Indicators
BIOS Beep Codes...............................................................................................69
BIOS Error Messages..........................................................................................69
B Regulatory Compliance
Safety Regulations .............................................................................................71
Place Battery Marking .................................................................................71
European Union Declaration of Conformity Statement..............................................72
Product Ecology Statements ................................................................................74
Recycling Considerations .............................................................................74
Lead-Free Desktop Board.............................................................................76
EMC Regulations ................................................................................................78
Ensure Electromagnetic Compatibility (EMC) Compliance..................................79
Product Certifications..........................................................................................80
Board-Level Certification Markings ................................................................80
Chassis and Component Certifications............................................................81
Figures
1. Desktop Board DG33TL Components ...............................................................11
2. LAN Connector LEDs .....................................................................................17
3. Location of the Standby Power Indicator ..........................................................23
4. Installing the I/O Shield ................................................................................27
5. Desktop Board DG33TL Mounting Screw Hole Locations......................................28
6. Lift the Socket Lever .....................................................................................29
7. Lift the Load Plate.........................................................................................30
8. Remove the Protective Socket Cover ...............................................................30
9. Remove the Processor from the Protective Processor Cover ................................31
10. Install the Processor .....................................................................................31
11. Close the Load Plate .....................................................................................32
12. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header..........33
13. Dual Channel Memory Configuration with Two DIMMs ........................................35
14. Dual Channel Memory Configuration with Four DIMMs........................................35
15. Dual Channel Memory Configuration with Three DIMMs......................................36
16. Use DDR2 DIMMs .........................................................................................37
17. Installing a DIMM .........................................................................................38
18. Installing a PCI Express x16 Card ...................................................................40
19. Removing a PCI Express x16 Card ..................................................................41
20. Connecting the IDE Cable ..............................................................................43
21. Connecting a Serial ATA Cable........................................................................44
22. Connecting the External Serial ATA Adapter Bracket ..........................................45
23. Internal Headers ..........................................................................................46
24. Back Panel Audio Connectors .........................................................................51
25. Location of the Chassis Fan Headers................................................................52
26. Connecting Power Supply Cables ....................................................................53
27. Location of the BIOS Configuration Jumper Block ..............................................54
28. Removing the Battery ...................................................................................61
Intel Desktop Board DG33TL Product Guide
viii
Tables
1. Feature Summary.......................................................................................... 9
2. Desktop Board DG33TL Components ...............................................................12
3. DVI/VGA Port Status.....................................................................................16
4. LAN Connector LEDs .....................................................................................18
5. HD Audio Link Header Signal Names ...............................................................47
6. IEEE 1394a Signal Header Names...................................................................47
7. Front Panel Intel High Definition Audio Header Signal Names ..............................47
8. Front Panel CIR Receiver (Input) Header Signal Names......................................48
9. Back Panel CIR Header Emitter (Output) Header Signal Names ...........................48
10. Serial Port Header Signal Names.....................................................................49
11. Chassis Intrusion Header ...............................................................................49
12. Alternate Front Panel Power LED Header..........................................................49
13. Front Panel Header .......................................................................................50
14. USB 2.0 Header Signal Names........................................................................50
15. Jumper Settings for the BIOS Setup Program Modes..........................................55
16. Beep Codes .................................................................................................69
17. BIOS Error Messages ....................................................................................69
18. Safety Regulations........................................................................................71
19. Lead-Free Board Markings .............................................................................77
20. EMC Regulations...........................................................................................78
21. Product Certification Markings ........................................................................80
9
1 Desktop Board Features
This chapter briefly describes the features of Intel
®
Desktop Board DG33TL. Table 1
summarizes the major features of the Desktop Board.
Table 1. Feature Summary
Form Factor
microATX (243.84 millimeters [9.60 inches] x 243.84 millimeters
[9.60 inches])
Processor Support for an Intel
®
processor in the LGA775 package
Main Memory
Four 240-pin, DDR2 1.8 V (only) SDRAM Dual Inline Memory Module
(DIMM) sockets
800/667 MHz single or dual channel DDR2 SDRAM interface
Support for up to 8 GB of system memory
Chipset Intel
®
G33 Express Chipset consisting of:
Intel G33 Express Chipset Graphics and Memory Controller Hub
(GMCH)
Intel
®
82801IR I/O Controller Hub (ICH9R)
Graphics
Intel G33 Express Chipset Graphics and Memory Controller Hub
(GMCH)
One PCI Express* x16 connector supporting PCI Express graphics
cards
Audio
8-channel (7.1) onboard subsystem, featuring:
Intel
®
High Definition Audio interface
IDT* STAC9271D audio codec
HD Audio Link header
LAN Support
Intel
®
82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
Expansion
Capabilities
One PCI Express x16 connector
Two PCI Express x1 connectors
One PCI connector
Legacy I/O Support
Legacy I/O Controller that provides:
Consumer Infrared (CIR) support
One serial port via an onboard header
Peripheral
Interfaces
Up to 12 USB 2.0 ports
Six ports routed to the back panel
Six ports routed to three USB headers
Up to two IEEE 1394a ports
One port routed to the back panel
One port routed to an IEEE 1394a header
Six Serial ATA (SATA) channels (3.0 Gb/s), via the ICH9R, including
one external SATA (eSATA) channel
One IDE interface with ATA-66/100 support (two devices)
continued
Intel Desktop Board DG33TL Product Guide
10
Table 1. Feature Summary (continued)
BIOS
Intel
®
Platform Innovation Framework for extensible firmware
interface
8 Mbit symmetrical flash memory device
Support for SMBIOS
Intel
®
Rapid BIOS Boot
Intel
®
Express BIOS Update
Power Management
Support for Advanced Configuration and Power Interface (ACPI)
Suspend to RAM (STR)
Wake on USB, PCI Express, LAN, and front panel
ENERGY STAR* qualified desktop board
Hardware
Management
Hardware monitor with:
Three fan sensing inputs used to monitor fan activity
Intel
®
Quiet System Technology fan speed control
Voltage sensing to detect out of range values
Related Links:
For more information about Desktop Board DG33TL, including the Technical Product
Specification (TPS), BIOS updates, and device drivers, go to:
http://support.intel.com/support/motherboards/desktop/
Supported Operating Systems
The Desktop Board supports the following operating systems:
Microsoft Windows Vista* Ultimate
Microsoft Windows Vista Enterprise
Microsoft Windows Vista Business
Microsoft Windows Vista Home Premium
Microsoft Windows Vista Home Basic
Microsoft Windows Vista Ultimate 64-bit edition
Microsoft Windows Vista Enterprise 64-bit edition
Microsoft Windows Vista Business 64-bit edition
Microsoft Windows Vista Home Premium 64-bit edition
Microsoft Windows Vista Home Basic 64-bit edition
Microsoft Windows* XP Media Center Edition 2005
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 Edition
Microsoft Windows XP Home
Desktop Board Features
11
Desktop Board Components
Figure 1 shows the approximate location of the major components on Desktop Board
DG33TL.
Figure 1. Desktop Board DG33TL Components
Intel Desktop Board DG33TL Product Guide
12
Table 2. Desktop Board DG33TL Components
Label Description
A Front panel audio header
B Speaker
C PCI bus connector
D PCI Express x1 connector 2
E Battery
F PCI Express x1 connector 1
G PCI Express x16 connector
H Rear chassis fan header (3-pin)
I Back panel connectors
J 12 V processor core voltage connector (2 x 2 pin)
K Processor socket
L Processor fan header (4-pin)
M Serial header
N Main power connector (2 x 12 pin)
O DDR2 DIMM 0 sockets
P DDR2 DIMM 1 sockets
Q Front panel header
R Alternate front panel power LED header
S Chassis intrusion header
T BIOS configuration jumper block
U Front chassis fan header (3-pin)
V Serial ATA connectors
W External SATA (eSATA) connector
X High-speed USB 2.0 header 2
Y High-speed USB 2.0 header 3
Z Front panel CIR receiver (input) header
AA Back panel CIR emitter (output) header
BB High-speed USB 2.0 header 1
CC IDE connector
DD IEEE 1394a header
EE High Definition Audio Link header
Desktop Board Features
13
Related Links:
Go to the following links for more information about:
Desktop Board DG33TL
http://www.intel.com/design/motherbd
http://support.intel.com/support/motherboards/desktop
Supported processors
http://www.intel.com/go/findCPU
Audio software and utilities
http://www.intel.com/design/motherbd
LAN software and drivers
http://www.intel.com/design/motherbd
Processor
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin)
power connector to the Desktop Board may result in damage to the board, or the
system may not function properly.
Desktop Board DG33TL supports an Intel processor in the LGA775 package.
Processors are not included with the Desktop Board and must be purchased
separately. The processor connects to the Desktop Board through the LGA775 socket.
Related Links:
Go to the following page or link for more information about:
Instructions on installing or upgrading the processor, page
29 in Chapter 2
Supported processors for Desktop Board DG33TL,
http://www.intel.com/go/findCPU
Main Memory
NOTE
To be fully compliant with all applicable Intel
®
SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The Desktop Board supports the dual or single channel memory configurations defined
below.
Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module
(DIMM) connectors with gold-plated contacts.
Intel Desktop Board DG33TL Product Guide
14
Support for:
Unbuffered, non-registered single or double-sided DIMMs
Non-ECC DDR2 memory
DIMM Type and Timings listed below:
Type Timing
DDR2-800 5-5-5 or 6-6-6 only
DDR2-667 5-5-5 only
Serial Presence Detect (SPD) memory only
Memory configurations listed below:
Up to 2.0 GB utilizing 256 Mb technology
Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
Up to 8.0 GB utilizing 1 Gb technology
Related Links:
Go to the following links or pages for more information about:
SDRAM specifications,
http://www.intel.com/technology/memory/
Installing memory, page
34 in Chapter 2
Tested memory,
http://www.cmtlabs.com/mbsearch.asp or
http://www.intel.com/products/motherboard/index.htm?iid=HMPAGE+Header_2_Pr
oduct_MB
PC Serial Presence Detect Specification,
http://www.intel.com/technology/memory/ddr/specs/dda18c32_64_128x72aga.pdf
Intel
®
G33 Express Chipset
The Intel G33 Express Chipset consists of the following devices:
Intel G33 Express Chipset Graphics and Memory Controller Hub (GMCH) with Direct
Media Interface (DMI)
Intel 82801IR I/O Controller Hub (ICH9R) with DMI
The GMCH component provides interfaces to the processor, memory, PCI Express, and
the DMI interconnect. The component also provides integrated graphics capabilities
supporting 3D, 2D, and display capabilities. The ICH9R is a centralized controller for
the board’s I/O paths.
Related Links:
Go to the following link for more information about the Intel G33 Express Chipset:
http://developer.intel.com/design/nav/pcserver.htm
Desktop Board Features
15
Intel G33 Graphics Subsystem
The Intel G33 Express Chipset contains two separate, mutually exclusive graphics
options. Either the integrated Intel Graphics Media Accelerator 3100 (Intel
®
GMA 3100) graphics controller is used or a PCI Express x16 add-in card can be used.
When a PCI Express x16 add-in card is installed, the Intel GMA 3100 graphics
controller is disabled.
GMA 3100 Graphics Controller
The Intel GMA 3100 features the following:
400 MHz core frequency
High quality texture engine:
DX9.0c* and OpenGL* 1.4 compliant
Hardware Pixel Shader 2.0
Vertex Shader Model 2.0
3D Graphics Rendering enhancements:
1.6 dual texture GigaPixel/s maximum fill rate
16-bit and 32-bit color
Maximum 3D supported resolution of 1600 x 1200 x 32 at 85 Hz refresh
Vertex cache
Video
Software DVD at 30 fps full screen
Adaptive deinterlacing
Dynamic Video Memory Technology (DVMT) support up to 256 MB
Intel
®
Clear Video Technology
Display
Intel TV Wizard utility (step-by-step setup help for TVs and displays)
Up to 2048 x 1536 at 75 Hz refresh (QXGA)
DVI 1.0 compliant
Dual independent display options with digital display
Hardware color cursor support
High Definition Content Protection (HDCP) version 1.1 support
DDC2B compliant interface with Advanced Digital Display 2 card or Media
Expansion Card (ADD2/MEC), support for TV-out/TV-in and DVI digital display
connections
Supports flat panels up to 2048 x 1536 at 75 Hz refresh (when in dual-channel
mode) or digital CRT/HDTV at 1920 x 1080 at 60 Hz refresh (with ADD2/MEC)
NOTE
A minimum of 512 MB of system memory is required in order for the Intel GMA 3100
integrated graphics controller to operate properly.
Intel Desktop Board DG33TL Product Guide
16
Digital Video Interface (DVI)
The DVI port supports only DVI-D (digital only) displays. The maximum support
resolution is 1600 x 1200 at a 60 Hz refresh rate. The DVI port is compliant with the
DVI 1.0 specification.
Depending on the type of add-in card installed in the PCI Express x16 connector, the
DVI and VGA ports will behave as described in
Table 3.
Table 3. DVI/VGA Port Status
PCI Express x16 Connector DVI Port VGA Port
No add-in card installed Enabled Enabled
Non-video PCI Express x1 add-in card installed Enabled Enabled
PCI Express x4, x8, or x16 add-in card installed Disabled Disabled
ADD2 or MEC card installed Disabled Enabled
Audio Subsystem
The onboard audio subsystem consists of the following:
Intel
®
ICH9R I/O controller hub
IDT STAC9271D audio codec
Back panel audio connectors
Onboard audio headers:
Intel High Definition audio front panel audio header
HD audio link header
The audio subsystem supports the following features:
Dolby* Home Theater support
A signal-to-noise (S/N) ratio of 95 dB
Independent multi-streaming 7.1 audio (using the back panel audio connectors)
and stereo (using the Intel High Definition front panel audio header)
ADAT* optical interface support from the back panel S/PDIF optical port
Related Links:
Go to the following link or pages for more information about:
Audio drivers and utilities
http://support.intel.com/support/motherboards/desktop/
Installing the front panel audio solution, page
47
The location of audio connectors,
Figure 24 on page 51
Desktop Board Features
17
Legacy Input/Output (I/O) Controller
The I/O controller features the following:
Consumer Infrared (CIR) support
Low pin count (LPC) interface
One serial port interface via an onboard header
Serial IRQ interface compatible with serialized IRQ support for PCI systems
Intelligent power management, including a programmable wake up event interface
PCI power management support
LAN Subsystem
The LAN subsystem includes:
Intel ICH9R
Intel 82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
RJ-45 LAN connector with integrated status LEDs
The subsystem features:
CSMA/CD protocol engine
LAN connect interface between ICH9R and the LAN controller
PCI bus power management
Related Links:
Go to the following link for information about LAN software and drivers:
http://support.intel.com/support/motherboards/desktop
RJ-45 LAN Connector LEDs
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 2). These LEDs indicate the status of the LAN.
Figure 2. LAN Connector LEDs
Intel Desktop Board DG33TL Product Guide
18
Table 4 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 4. LAN Connector LEDs
LED LED Color LED State Indicates
A Off LAN link is not established
Green
On LAN link is established
Blinking LAN activity is occurring
N/A Off 10 Mb/s data rate
Green On 100 Mb/s data rate
B
Yellow On 1000 Mb/s data rate
Hi-Speed USB 2.0 Support
The Desktop Board supports up to 12 USB 2.0 ports (six ports routed to the back
panel and six ports routed to three internal headers) via the ICH9R. USB 2.0 ports are
backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at
USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support
USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports
to USB 1.1 operation. This may be required to accommodate operating systems that
do not support USB 2.0.
Enhanced IDE Interface
The board’s IDE interface handles the exchange of information between the processor
and peripheral devices such as hard disk drives and CD-ROM drives. The interface
supports:
Up to two IDE devices (such as hard drives)
ATAPI-style devices (such as CD-ROM drives)
Older PIO Mode devices
Ultra DMA-33 and ATA-66/100 protocols
Desktop Board Features
19
Serial ATA
The Desktop Board supports six Serial ATA channels (3.0 Gb/s) via ICH9R, connecting
one device per channel. One channel is configured as an eSATA channel.
Serial ATA RAID
The ICH9R supports the following RAID (Redundant Array of Independent Drives)
levels:
RAID 0 - data striping
RAID 1 - data mirroring
RAID 0+1 (or RAID 10) - data striping and mirroring
RAID 5 - distributed parity
For information on configuring your system for RAID using Intel
®
Matrix Storage
Technology see Chapter 4.
Expandability
For system expansion, the Desktop Board provides the following expansion slots:
Two PCI Express x1 connectors
One PCI Express x16 connector
One PCI bus connector
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the
PCI/PCI Express and IDE auto-configuration utilities, and the video BIOS. The BIOS is
stored in the Serial Peripheral Interface (SPI) Flash.
The BIOS can be updated by following the instructions on page
63 in Chapter 3.
Serial ATA and IDE Auto Configuration
If you install a Serial ATA or IDE device (such as a hard drive) in your computer, the
auto-configuration utility in the BIOS automatically detects and configures the device
for your computer. You do not need to run the BIOS Setup program after installing a
Serial ATA or IDE device. You can override the auto-configuration options by
specifying manual configuration in the BIOS Setup program.
PCI and PCI Express* Auto Configuration
If you install a PCI/PCI Express add-in card in your computer, the PCI/PCI Express
auto-configuration utility in the BIOS automatically detects and configures the
resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need
to run the BIOS Setup program after you install a PCI/PCI Express add-in card.
Intel Desktop Board DG33TL Product Guide
20
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can
be accessed and who can boot the computer. A supervisor password and a user
password can be set for the BIOS Setup and for booting the computer, with the
following restrictions:
The supervisor password gives unrestricted access to view and change all Setup
options. If only the supervisor password is set, pressing <Enter> at the password
prompt of Setup gives the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the
supervisor password or the user password to access Setup. Setup options are then
available for viewing and changing depending on whether the supervisor or user
password was entered.
Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor password
is set, the computer boots without asking for a password. If both passwords are
set, you can enter either password to boot the computer.
Related Links:
For instructions on resetting the password, see
Clearing Passwords on page 56.
Hardware Management Features
The hardware management features of Desktop Board DG33TL enable the board to be
compatible with the Wired for Management (WfM) specification. The board has several
hardware management features including the following:
Fan speed monitoring and control
Thermal and voltage monitoring
Chassis intrusion detection
Hardware Monitoring and Fan Speed Control
The features of the hardware monitoring and fan speed control include:
Monitoring of power supply voltages to detect levels above and below acceptable
values
Intel Quiet System Technology fan speed control, delivering acoustically-optimized
thermal management
NOTE
Memory must be installed in the Channel A, DIMM 0 socket to enable Intel
Quiet System Technology.
Fan speed controllers and sensors integrated into the ICH9R
Thermal sensors in the processor, MCH, and ICH9R, plus an onboard remote sensor
Thermally monitored closed-loop fan control, for all onboard fans, that can adjust
fan speed or switch the fans off as needed
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Intel Telephone DG33TL Manuale utente

Categoria
Schede madri
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue