Intel D975XBX2 Manuale utente

Intel® Desktop Board D975XBX2

Product Guide

Order Number: D63326-005

Revision History

Revision Revision History Date

-001 First version of the Intel

®

Desktop Board D975XBX2 Product Guide September 2006

-002 Update to the Intel

®

Desktop Board D975XBX2 Product Guide October 2006

-003 Update to the Intel

®

Desktop Board D975XBX2 Product Guide November 2006

-004 Update to the Intel

®

Desktop Board D975XBX2 Product Guide January 2007

-005 Update to the Intel

®

Desktop Board D975XBX2 Product Guide October 2007

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124

1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the

user’s authority to operate the equipment.

Tested to comply with FCC standards for home or office use.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set

out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique német pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par

le ministére des Communications du Canada.

Disclaimer

Information in this document is provided in connection with Intel

®

products. No license, express or implied,

by estoppel or

otherwise, to any intellectual property rights is granted by this document. Except as provided

in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel

disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or

warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent,

copyright or other intellectual property right. Intel products are not intended for use in medical, life saving,

or life sustaining applications. Intel may make changes to specifications and product descriptions at any

time, without notice.

Desktop Board D975XBX2 may contain design defects or errors known as errata which may cause the

product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing

your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel

literature, may be obtained from Intel Corporation by going to the World Wide Web site at:

http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Pentium, and Celeron are registered trademarks of Intel Corporation in the United States and other

countries.

* Other names and brands may be claimed as the property of others.

iii

Preface

This Product Guide gives information about board layout, component installation, BIOS

updates, and regulatory requirements for Intel

®

Desktop Board D975XBX2.

Intended Audience

The Product Guide is intended only for technically qualified personnel.

Use Only for Intended Applications

All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.)

for use in personal computers (PCs) for installation in homes, offices, schools,

computer rooms, and similar locations. The suitability of this product for other PC or

embedded non-PC applications or other environments, such as medical, industrial,

alarm systems, test equipment, etc. may not be supported without further evaluation

by Intel.

Document Layout

The chapters in this Product Guide are arranged as follows:

1 Desktop Board Features: a summary of product features

2 Installing and Replacing Desktop Board Components: instructions on how to install

the desktop board and other hardware components

3 BIOS: instructions on how to update the BIOS

4 Configuring for RAID: information about configuring your system for RAID

A Error Messages and Indicators: information about BIOS error messages and beep

codes

B Regulatory Compliance: safety and EMC regulations, product certification

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

Intel Desktop Board D975XBX2 Product Guide

iv

Terminology

The table below gives descriptions to some common terms used in the product guide.

Term Description

GB Gigabyte (1,073,741,824 bytes)

GHz Gigahertz (one billion hertz)

KB Kilobyte (1024 bytes)

MB Megabyte (1,048,576 bytes)

Mbit Megabit (1,048,576 bits)

MHz Megahertz (one million hertz)

Box Contents

• Intel

®

Desktop Board

• I/O shield

• One ATA-66/100 cable

• One diskette drive cable

• Four Serial ATA cables

• One back panel USB 2.0 adapter

• One 2x2 to 2x4 power supply cable adapter

• Intel

®

Express Installer driver CD-ROM

• Intel Express Installer software DVD-ROM

• One diskette with the Intel

®

Matrix Storage RAID driver

• One diskette with the Marvell* SATA Controller RAID driver

• Back panel audio covers

• Quick Reference poster

• Integration Guide poster

• Printed Product Guide

• Configuration and battery caution statement label

v

Contents

1 Desktop Board Features

Supported Operating Systems..............................................................................11

Desktop Board Components.................................................................................12

Processor..........................................................................................................14

Main Memory.....................................................................................................14

Intel

®

975X Express Chipset................................................................................15

Audio Subsystem ...............................................................................................16

Input/Output (I/O) Controller ..............................................................................16

LAN Subsystem .................................................................................................17

LAN Subsystem Software.............................................................................17

RJ-45 LAN Connector LEDs...........................................................................17

Hi-Speed USB 2.0 Support ..................................................................................18

Enhanced IDE Interface ......................................................................................18

Serial ATA.........................................................................................................18

Expandability.....................................................................................................18

BIOS................................................................................................................19

Serial ATA and IDE Auto Configuration...........................................................19

PCI and PCI Express* Auto Configuration .......................................................19

Security Passwords.....................................................................................19

Chassis Intrusion ...............................................................................................20

Power Management Features ...............................................................................20

ACPI.........................................................................................................20

Fan Connectors ..........................................................................................20

Resume on Ring .........................................................................................22

Wake from USB..........................................................................................22

Wake from PS/2* Keyboard/Mouse ...............................................................22

PME# Wakeup Support................................................................................22

Onboard Power Button ................................................................................23

Speaker............................................................................................................23

Battery.............................................................................................................23

Real-Time Clock.................................................................................................23

2 Installing and Replacing Desktop Board Components

Before You Begin ...............................................................................................25

Installation Precautions.......................................................................................26

Prevent Power Supply Overload ....................................................................26

Observe Safety and Regulatory Requirements.................................................26

Installing the I/O Shield ......................................................................................27

Installing and Removing the Desktop Board ...........................................................28

Installing and Removing a Processor.....................................................................30

Installing a Processor ..................................................................................30

Installing the Processor Fan Heat Sink ...........................................................33

Connecting the Processor Fan Heat Sink Cable................................................33

Removing the Processor ..............................................................................33

Installing and Removing Memory..........................................................................34

Installing DIMMs ........................................................................................36

Removing DIMMs........................................................................................38

Intel Desktop Board D975XBX2 Product Guide

vi

Installing and Removing a PCI Express x16 Card ....................................................38

Installing a PCI Express x16 Card .................................................................39

Removing the PCI Express x16 Card..............................................................41

Connecting the IDE Cable....................................................................................42

Connecting the Serial ATA Cable ..........................................................................43

Connecting Internal Headers................................................................................44

Front Panel Header .....................................................................................45

Alternate Front Panel Power LED Header ........................................................45

IEEE 1394a Header.....................................................................................45

USB 2.0 Headers ........................................................................................46

Front Panel Audio Header ............................................................................46

Installing an External Serial ATA Adapter...............................................................48

Connecting Chassis Fan Cables ............................................................................49

Connecting Power Supply Cables ..........................................................................50

Other Connectors...............................................................................................51

Setting the BIOS Configuration Jumper .................................................................52

Clearing Passwords ............................................................................................53

Back Panel Connectors........................................................................................54

Replacing the Battery .........................................................................................55

3 BIOS

Accessing the BIOS Setup Program.......................................................................59

Updating the BIOS .............................................................................................59

Updating the BIOS with the Intel

®

Express BIOS Update Utility .........................59

Updating the BIOS with the Iflash Memory Update Utility .................................60

4 Configuring for RAID Requires Microsoft Windows* XP,

Windows Vista*, or Windows 2000 and SATA Hard Drive(s)

Configuring for RAID using Intel

®

Matrix Storage Technology ...................................63

Configuring the BIOS ..................................................................................63

Creating Your RAID Set ...............................................................................63

Loading the Intel Matrix Storage Technology RAID Drivers and Software ............64

Setting Up a “RAID Ready” System ...............................................................64

Configuring for RAID using Marvell Storage Technology ...........................................64

Configuring the BIOS ..................................................................................64

Creating Your RAID Set ...............................................................................65

Loading the Marvell Storage Technology RAID Drivers and Software ..................65

A Error Messages and Indicators

BIOS Beep Codes...............................................................................................67

BIOS Error Messages..........................................................................................67

Contents

vii

B Regulatory Compliance

Safety Regulations .............................................................................................69

Place Battery Marking .................................................................................69

European Union Declaration of Conformity Statement..............................................70

Product Ecology Statements ................................................................................71

Lead-Free Desktop Board.............................................................................74

EMC Regulations ................................................................................................75

Ensure Electromagnetic Compatibility (EMC) Compliance..................................76

Product Certifications..........................................................................................77

Board-Level Certification Markings ................................................................77

Chassis and Component Certifications............................................................78

Figures

1. Desktop Board D975XBX2 Components ...........................................................12

2. LAN Connector LEDs .....................................................................................17

3. Location of Standby Power Indicator................................................................21

4. Location of Onboard Power Button ..................................................................23

5. Installing the I/O Shield ................................................................................27

6. Location of Mounting Screw Holes ...................................................................29

7. Lift Socket Lever ..........................................................................................30

8. Lift the Load Plate.........................................................................................30

9. Remove the Protective Socket Cover ...............................................................31

10. Remove the Processor from the Protective Processor Cover ................................31

11. Install the Processor .....................................................................................32

12. Close the Load Plate .....................................................................................32

13. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header..........33

14. Dual Channel Memory Configuration Example 1 ................................................34

15. Dual Channel Memory Configuration Example 2 ................................................34

16. Dual Channel Memory Configuration Example 3 ................................................35

17. Use DDR2 DIMMs .........................................................................................36

18. Installing a DIMM .........................................................................................37

19. Installing PCI Express Graphics Cards..............................................................39

20. Installing a PCI Express x16 Card ...................................................................40

21. Removing the PCI Express x16 Card................................................................41

22. Connecting the IDE Cable ..............................................................................42

23. Connecting Serial ATA Cables.........................................................................43

24. Internal Headers ..........................................................................................44

25. Connecting the Rear Panel USB 2.0 Adapter .....................................................47

26. Connecting an External Serial ATA Adapter.......................................................48

27. Location of Fan Headers ................................................................................49

28. Connecting Power Supply Cables ....................................................................50

29. Location of Other Connectors .........................................................................51

30. Location of the BIOS Configuration Jumper Block ..............................................52

31. Back Panel Connectors ..................................................................................54

32. Removing the Battery ...................................................................................58

33. Accessing the BIOS Setup Program .................................................................59

Intel Desktop Board D975XBX2 Product Guide

viii

Tables

1. Feature Summary.......................................................................................... 9

2. Desktop Board D975XBX2 Components ...........................................................13

3. Memory Operating Frequencies.......................................................................15

4. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs ..................................17

5. Front Panel Header Signal Names ...................................................................45

6. IEEE 1394a Header Signal Names ...................................................................45

7. USB 2.0 Header Signal Names........................................................................46

8. Front Panel Audio Header Signal Names...........................................................46

9. Jumper Settings for the BIOS Setup Program Modes..........................................52

10. Beep Codes .................................................................................................67

11. BIOS Error Messages ....................................................................................67

12. Safety Regulations........................................................................................69

13. Lead-Free Board Markings .............................................................................74

14. EMC Regulations...........................................................................................75

15. Product Certification Markings ........................................................................77

9

1 Desktop Board Features

This chapter briefly describes the main features of Intel

®

Desktop Board D975XBX2.

Table 1 summarizes the major features of the desktop b

oard.

Table 1. Feature Summary

Form Factor

ATX (304.80 millimeters [12.00 inches] x 243.84 millimeters

[9.60 inches])

Processor

Support for an Intel

®

processor in the LGA775 package with 1066/800 MHz

front side bus

Main Memory

• Four 240-pin SDRAM Dual Inline Memory Module (DIMM) sockets

• 800/667/533 MHz dual channel DDR2 SDRAM interface

• Support for ECC and non-ECC memory

• Designed to support up to 8 GB of system memory

Chipset

Intel

®

975X Express Chipset consisting of:

• Intel

®

82975X Memory Controller Hub (MCH) with Direct Media Interface

• Intel

®

82801GH I/O Controller Hub (ICH7DH) supporting Intel

®

Matrix

Storage Technology

Graphics

Support for Multiple PCI Express* Graphics cards

Audio

Up to 8-channel onboard subsystem, featuring:

• Intel

®

High Definition Audio interface

• SigmaTel* STAC9274D audio codec

Expansion

Capabilities

• Two PCI bus add-in card connectors

• One PCI Express x16 connector (electrical x16 or x8)

• One PCI Express x16 connector (electrical x8)

• One PCI Express x16 connector (electrical x4)

LAN Support

Intel

®

82573L Gigabit Ethernet LAN controller with RJ-45 connector

BIOS

• Intel

®

Platform Innovation Framework for Extensible Firmware Interface

• 8 Mbit Serial Peripheral Interface (SPI) device

• Support for SMBIOS

• Intel

®

Rapid BIOS Boot

• Intel

®

Express BIOS Update

RAID

• Intel

®

Matrix Storage Technology for Serial ATA

• Marvell 88SE61XX* for Serial ATA

continued

Intel Desktop Board D975XBX2 Product Guide

10

Table 1. Feature Summary (continued)

Peripheral

Interfaces

• One front panel audio header (yellow)

• Up to eight USB 2.0 ports:

― Four ports routed to the back panel

― Four ports routed to two USB headers

• Eight Serial ATA channels (one device per channel):

― Four RAID capable Serial ATA (3.0 Gb/s) connectors (black) via

the ICH7DH

― Three RAID capable Serial ATA (3.0 Gb/s) connectors (blue) via

the Marvell RAID controller

― One RAID capable Serial ATA (3.0 Gb/s) connector via the Marvell

RAID controller, compatible with an external Serial ATA drive

(red)

• Up to two IEEE 1394a ports:

― One IEEE 1394a port routed to the back panel

― One IEEE 1394a header (blue)

• One IDE interface with ATA-66/100 support

• One diskette drive interface

• One parallel port

• One serial port

• RJ-45 LAN port

• PS/2* keyboard and mouse ports

Power Management

• Support for Advanced Configuration and Power Interface (ACPI)

• Suspend to RAM (STR)

• Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel

Hardware

Management

Hardware monitor with:

• Four fan sensing inputs used to monitor fan activity

• Remote diode temperature sensing

• Intel

®

Precision Cooling Technology fan speed control

• Voltage sensing to detect out of range values

Related Links

For more information about Intel Desktop Board D975XBX2, including the Technical

Product Specification (TPS), BIOS updates, and device drivers, go to:

http://support.intel.com/support/motherboards/desktop/

Desktop Board Features

11

Supported Operating Systems

The desktop board supports the following operating systems:

• Microsoft Windows Vista* Ultimate

• Microsoft Windows Vista Enterprise

• Microsoft Windows Vista Business

• Microsoft Windows Vista Home Premium

• Microsoft Windows Vista Home Basic

• Microsoft Windows Vista Ultimate 64-bit edition

• Microsoft Windows Vista Enterprise 64-bit edition

• Microsoft Windows Vista Business 64-bit edition

• Microsoft Windows Vista Home Premium 64-bit edition

• Microsoft Windows Vista Home Basic 64-bit edition

• Microsoft Windows* XP Media Center Edition 2005

• Microsoft Windows XP Professional

• Microsoft Windows XP Professional x64 Edition

• Microsoft Windows XP Home

• Microsoft Windows 2000

Intel Desktop Board D975XBX2 Product Guide

12

Desktop Board Components

Figure 1 shows the approximate location of the major components on Desktop Board

D975XBX2.

Figure 1. Desktop Board D975XBX2 Components

Desktop Board Features

13

Table 2. Desktop Board D975XBX2 Components

Label Description

A Auxiliary rear chassis fan header (4-pin)

B PCI bus add-in card connector 2 (SMBus routed)

C PCI Express x16 connector 3 (electrical x4)

D PCI bus add-in card connector 1

E PCI Express x16 connector 2 (electrical x8)

F Front panel audio header

G Primary PCI Express x16 connector 1 (electrical x16 or x8)

H Rear chassis fan header (3-pin)

I Alternate power connector (1x4)

J Back panel connectors

K 12 V power connector (2x4)

L Secondary chassis fan header (3-pin)

M Processor socket (LGA775)

N DDR 2 DIMM 0 sockets

O Processor fan header (4-pin)

P DDR 2 DIMM 1 sockets

Q Main power connector (2x12)

R Diskette drive connector

S BIOS configuration jumper

T Chassis intrusion header

U Onboard power button

V Battery

W IDE connector (right angle connector)

X 3.0-Gigabit/s Serial ATA connectors 0, 1, 2, and 3 (black)

Y Front chassis fan header (3-pin)

Z Alternate front panel power LED header (1x3)

AA USB 2.0 headers (two ports per header)

BB IEEE 1394a header

CC 3.0-Gigabit/s Serial ATA connectors 5, 6, and 7 (blue)

DD

3.0-Gigabit/s Serial ATA connector 4, compatible with external Serial ATA

adapter (red)

EE Front panel header

FF Speaker

Related Links

Go to the following links for more information about:

• Desktop Board D975XBX2

http://www.intel.com/design/motherbd

http://support.intel.com/support/motherboards/desktop

• Supported processors

http://support.intel.com/support/motherboards/desktop

• Audio software and utilities

http://www.intel.com/design/motherbd

• LAN software and drivers

http://www.intel.com/design/motherbd

Intel Desktop Board D975XBX2 Product Guide

14

Processor

CAUTION

Failure to use the appropriate power supply (below) and/or not connecting the 12 V

(2x4) power connector to the desktop board may result in damage to the board or the

system may not function properly.

The desktop board D975XBX2 supports an Intel

®

processor in the LGA775 package.

Processors are not included with the desktop board and must be purchased separately.

The processor connects to the Intel desktop board through the LGA775 socket.

The supported processors list for Desktop Board D975XBX2 is located on the web at:

http://support.intel.com/support/motherboards/desktop/

Related Links

Go to the following links or pages for more information about:

• Instructions on installing or upgrading the processor, page 30 in Chapter 2

• The location of the po

wer connectors, page 50 in Chapter 2

Main Memory

NOTE

To be fully compliant with all applicable Intel

®

SDRAM memory specifications, the

desktop board should be populated with DIMMs that support the Serial Presence

Detect (SPD) data structure. If your memory modules do not support SPD, you will

see a notification to this effect on the screen at power up. The BIOS will attempt to

configure the memory controller for normal operation.

The desktop board supports dual or single channel memory configurations defined

below:

• Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module

(DIMMs) connectors with gold-plated contacts.

• Support for:

Unbuffered, non-registered single or double-sided DIMMs

ECC and non-ECC DDR2 800/667/533 MHz memory

Serial Presence Detect (SPD) memory only

Memory configuration listed below:

• Up to 2.0 GB utilizing 256 Mb technology

• Up to 4.0 GB utilizing 512 Mb or 1 Gb technology

• Up to 8.0 GB utilizing 1 Gb technology

Desktop Board Features

15

NOTE

Regardless of the DIMM type used, the memory frequency will either be equal to or

less than the processor system bus frequency. For example, if DDR2 667 memory is

used with a 533 MHz system bus frequency processor, the memory will operate at

533 MHz. Table 3 lists the resulting operating memory frequencies based on the

combinatio

n of DIMMs and processors.

Table 3. Memory Operating Frequencies

DIMM Type

Processor system bus

frequency

Resulting memory

frequency

DDR2 533 533 533

DDR2 533 800 533

DDR2 533 1066 533

DDR2 667 533 533

DDR2 667 800 667

DDR2 667 1066 667

DDR2 800 533 533

DDR2 800 800 800

DDR2 800 1066 800

Related Links

Go to the following links or pages for more information about:

• The latest list of tested memory,

http://support.intel.com/support/motherboards/desktop/

• SDRAM specifications, http://www.intel.com/technology/memory/

• Installing memory, page 34 in Chapter 2

Intel

®

975X Express Chipset

The Intel 975X Express Chipset consists of the following devices:

• Intel 82975X Memory Controller Hub (MCH) with Direct Media Interface

• Intel 82801GH I/O Controller Hub (ICH7DH)

Related Links

Go to the following link or pages for more information about audio drivers and utilities:

http://support.intel.com/support/motherboards/desktop/

Input/Output (I/O) Controller

The super I/O controller features the following:

• One serial port

• One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port

(EPP) support

• Serial IRQ interface compatible with serialized IRQ support for PCI systems

• PS/2-style mouse and keyboard interfaces

• Interface for one 1.2 MB, 1.44 MB, or 2.88 MB diskette drive

• Intelligent power management, including a programmable wake up event interface

• PCI power management support

Desktop Board Features

17

LAN Subsystem

The LAN, with the Intel 82801GH I/O Controller Hub, provides a Fast PCI LAN

subsystem. The LAN subsystem provides the following functions:

• Intel 82573L Ethernet LAN supporting 10/100/1000 Mbit/sec

• Support for RJ-45 connector with status indicator LEDs

• Configurable EEPROM that contains the MAC address

LAN Subsystem Software

For LAN software and drivers, refer to the D975XBX2 link on Intel’s World Wide Web

site at:

http://support.intel.com/support/motherboards/desktop

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see

Figure 2). These LEDs indicate the

status of the LAN.

Figure 2. LAN Connector LEDs

Table 4 describes the LED states when the board is powered up and the

10/100/1000 Gigabit Ethernet LAN subsystem is operating.

Table 4. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs

LED LED Color LED State Indicates

A Off LAN link is not established

Green

On LAN link is established

Blinking LAN activity is occurring

N/A Off 10 Mb/s data rate

Green On 100 Mb/s data rate

B

Yellow On 1000 Mb/s data rate

Intel Desktop Board D975XBX2 Product Guide

18

Hi-Speed USB 2.0 Support

NOTE

Computer systems that have an unshielded cable attached to a USB port might not

meet FCC Class B requirements, even if no device or a low-speed USB device is

attached to the cable. Use a shielded cable that meets the requirements for a

full-speed USB device.

The desktop board supports up to eight USB 2.0 ports via ICH7; four ports routed to

the back panel and four routed to two internal USB 2.0 headers. USB 2.0 ports are

backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at

USB 1.1 speeds.

USB 2.0 support requires both an operating system and drivers that fully support

USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports

to USB 1.1 operation. This may be required to accommodate operating systems that

do not support USB 2.0.

Enhanced IDE Interface

The ICH7 IDE interface handles the exchange of information between the processor

and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside

the computer. The interface supports:

• Up to two IDE devices (such as hard drives)

• ATAPI-style devices (such as CD-ROM drives)

• Older PIO Mode devices

• Ultra DMA-33 and ATA-66/100 protocols

Serial ATA

The desktop board supports eight Serial ATA channels, connecting one device per

channel in either a RAID or a non-RAID configuration.

Expandability

For system expansion, the desktop board supports the following:

• One PCI Express x16 card as an electrical x16 card or two PCI Express x16 cards

as electrical x8 cards

• One PCI Express x16 card as an electrical x4 card

• Two PCI bus add-in cards

Related Links

For information about installing a PCI Express x16 card, see page 38 in Chapter 2.

Desktop Board Features

19

BIOS

The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI

and IDE auto-configuration utilities, and the video BIOS.

See Chapter 3 on page 59 for more information about the BIOS.

Serial ATA and IDE Auto Configuration

If you connect a Serial ATA or IDE device (such as a hard drive) to your desktop

board, the auto-configuration utility in the BIOS automatically detects and configures

the device for your computer. You do not need to run the BIOS Setup program after

installing a Serial ATA or IDE device. You can override the auto-configuration options

by specifying manual configuration in the BIOS Setup program.

When booting from a Serial ATA device, the device connected to Serial ATA connector

0 is the first boot device and the device connected to Serial ATA connector 3 is the last

boot device by default.

PCI and PCI Express* Auto Configuration

If you install a PCI/PCI Express add-in card in your desktop board, the PCI/PCI

Express auto-configuration utility in the BIOS automatically detects and configures the

resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need

to run the BIOS Setup program after you install a PCI/PCI Express add-in card.

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can

be accessed and who can boot the computer. A supervisor password and a user

password can be set for the BIOS Setup and for booting the computer, with the

following restrictions:

• The supervisor password gives unrestricted access to view and change all Setup

options. If only the supervisor password is set, pressing <Enter> at the password

prompt of Setup gives the user restricted access to Setup.

• If both the supervisor and user passwords are set, you must enter either the

supervisor password or the user password to access Setup. Setup options are then

available for viewing and changing depending on whether the supervisor or user

password was entered.

• Setting a user password restricts who can boot the computer. The password

prompt is displayed before the computer is booted. If only the supervisor

password is set, the computer boots without asking for a password. If both

passwords are set, you can enter either password to boot the computer.

Intel D975XBX2 Manuale utente

Questo manuale è adatto anche per

Intel D975XBX2 Manuale utente

in altre lingue

Documenti correlati

Altri documenti