Lexmark MS315 Manuale utente

Categoria
Stampanti laser / LED
Tipo
Manuale utente

Questo manuale è adatto anche per

MS315, MS415, & M1140+
Machine Type 4514-335, -530, -539
Service Manual
Start diagnostics
Maintenance
Safety and notices
Trademarks
Index
April 03, 2014 www.lexmark.com
P/N 12G3397
Product information
Product name:
MS315, MS415, M1140+
Machine type:
4514
Model(s):
335, 530, 539
Edition notice
April 03, 2014
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL,
INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these
changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any
time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all
countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product,
program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual
property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other
countries.
PrintCryption is a trademark of Lexmark International, Inc.
Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands
(language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the
printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the
commands.
All other trademarks are the property of their respective owners.
© 2014 Lexmark International, Inc.
All rights reserved.
P/N 12G3397
4514
Table of contents
Product information.....................................................................................2
Edition notice...............................................................................................2
Notices and safety information..................................................................11
Laser notices............................................................................................................................................11
Safety information...................................................................................................................................14
Preface.......................................................................................................19
Service manual conventions....................................................................................................................19
General information...................................................................................21
Media guidelines.....................................................................................................................................21
Paper guidelines ...............................................................................................................................................21
Using specialty media .......................................................................................................................................25
Supported paper sizes, types, and weights ......................................................................................................26
Data security notice.................................................................................................................................29
Tools required for service........................................................................................................................29
Diagnostic information...............................................................................31
Troubleshooting overview.......................................................................................................................31
Performing the initial troubleshooting check ...................................................................................................31
Poweron Reset (POR) sequence ......................................................................................................................31
Fixing print quality issues........................................................................................................................32
Initial print quality check ..................................................................................................................................32
Gray background or toner fog check ................................................................................................................32
Blank pages check.............................................................................................................................................33
Solid black pages check.....................................................................................................................................34
Repeating defects check ...................................................................................................................................35
Shadow images check .......................................................................................................................................35
Skewed print check...........................................................................................................................................36
Streaked horizontal or vertical lines appear on prints check............................................................................38
Toner smear check............................................................................................................................................38
Toner specks appear on prints check ...............................................................................................................39
Paper jams...............................................................................................................................................40
Avoiding jams....................................................................................................................................................40
Understanding jam messages and locations.....................................................................................................41
200 paper jams ................................................................................................................................................. 43
201 paper jams ................................................................................................................................................. 50
4514
Table of contents
3
202 paper jams ................................................................................................................................................. 52
23y paper jams .................................................................................................................................................55
241 paper jams ................................................................................................................................................. 57
242 paper jams ................................................................................................................................................. 60
25y paper jams .................................................................................................................................................64
Understanding the printer messages......................................................................................................66
Cartridge, imaging unit mismatch [41.xy].........................................................................................................66
Cartridge low [88.xy].........................................................................................................................................66
Cartridge nearly low [88.xy]..............................................................................................................................66
Cartridge very low, [x] estimated pages remain [88.xy] ...................................................................................66
Change [paper source] to [custom string] load [orientation]...........................................................................67
Change [paper source] to [custom type name] load [orientation]...................................................................67
Change [paper source] to [paper size] load [orientation] ................................................................................67
Change [paper source] to [paper type] [paper size] load [orientation]............................................................67
Close front door ................................................................................................................................................67
Complex page, some data may not have printed [39]......................................................................................68
Configuration change, some held jobs were not restored [57] ........................................................................ 68
Credentials invalid. Print job canceled..............................................................................................................68
Defective flash detected [51]............................................................................................................................68
Imaging unit low [84.xy] ...................................................................................................................................68
Imaging unit nearly low [84.xy] ........................................................................................................................68
Imaging unit very low, [x] estimated pages remain [84.xy] ..............................................................................68
Incorrect paper size, open [paper source] [34] ................................................................................................69
Insert tray [x] ....................................................................................................................................................69
Insufficient memory to support Resource Save feature [35]............................................................................69
Insufficient memory to collate job [37] ............................................................................................................69
Insufficient memory, some Held Jobs were deleted [37] ................................................................................. 69
Insufficient memory for Flash Memory Defragment operation [37]................................................................70
Insufficient memory, some held jobs will not be restored [37]........................................................................70
Load [paper source] with [custom string] [orientation] ...................................................................................70
Load [paper source] with [custom type name] [orientation] ...........................................................................70
Load [paper source] with [paper size] [orientation] .........................................................................................71
Load [paper source] with [paper type] [paper size] [orientation] ....................................................................71
Load Manual Feeder with [custom type name] [orientation] ..........................................................................71
Load Manual Feeder with [custom string] [orientation] ..................................................................................71
Load Manual Feeder with [paper size] [orientation] ........................................................................................72
Load Manual Feeder with [paper type] [paper size] [orientation] ...................................................................72
Memory full [38] ...............................................................................................................................................72
Network [x] software error [54] .......................................................................................................................72
NonLexmark [supply type], see User’s Guide [33.xy] ......................................................................................72
Not enough free space in flash memory for resources [52] .............................................................................73
Print quota exceeded. Print job canceled.........................................................................................................73
Print quota exceeded. Print job incomplete. ....................................................................................................73
Printer had to restart. Last job may be incomplete..........................................................................................73
Reinstall missing or unresponsive cartridge [31.xy] .........................................................................................74
4514
Table of contents
4
Reinstall missing or unresponsive imaging unit [31.xy]....................................................................................74
Remove paper from standard output bin.........................................................................................................74
Replace cartridge, 0 estimated pages remain [88.xy].......................................................................................74
Replace cartridge, printer region mismatch [42.xy] .........................................................................................74
Replace imaging unit, 0 estimated pages remain [84.xy] .................................................................................75
Replace unsupported cartridge [32.xy] ............................................................................................................75
Replace unsupported imaging unit [32.xy] .......................................................................................................75
Serial option [x] error [54] ................................................................................................................................75
Standard network software error [54]..............................................................................................................76
SMTP server not set up. Contact system administrator. ..................................................................................76
Standard parallel port disabled [56] .................................................................................................................76
Standard USB port disabled [56].......................................................................................................................76
Too many flash options installed [58]...............................................................................................................76
Too many trays attached [58]...........................................................................................................................77
Unformatted flash detected [53]......................................................................................................................77
Unsupported option in slot [x] [55] .................................................................................................................. 77
Weblink server not set up. Contact system administrator. ..............................................................................77
User attendance messages (0–99.99).....................................................................................................77
User attendance messages (099.99) ...............................................................................................................77
Toner cartridge smart chip contact service check ............................................................................................79
Imaging unit smart chip contact service check .................................................................................................80
Toner smart chip compatibility service check...................................................................................................80
Imaging chip compatibility service check .........................................................................................................81
Media size mismatch service check ..................................................................................................................81
Insufficient memory service check ...................................................................................................................82
Printer/cartridge mismatch service check ........................................................................................................83
Flash full service check......................................................................................................................................83
Imaging unit low service check .........................................................................................................................84
Toner cartridge low service check ....................................................................................................................84
Printer hardware errors..........................................................................................................................85
111 errors .........................................................................................................................................................85
121 errors .........................................................................................................................................................87
126 errors .........................................................................................................................................................88
132 errors .........................................................................................................................................................89
133 errors .........................................................................................................................................................90
140 errors .........................................................................................................................................................91
155 errors .........................................................................................................................................................92
171 errors .........................................................................................................................................................93
Steps before starting the 9yy service checks ....................................................................................................94
900 errors .........................................................................................................................................................96
912 errors .......................................................................................................................................................101
94y errors........................................................................................................................................................101
950–958 errors ...............................................................................................................................................101
959 errors .......................................................................................................................................................104
4514
Table of contents
5
96y errors........................................................................................................................................................105
97y errors........................................................................................................................................................106
98y errors........................................................................................................................................................106
99y errors........................................................................................................................................................107
Base printer symptoms...................................................................................................................................107
Dead machine service check...........................................................................................................................107
Controller board service check .......................................................................................................................108
Control panel button service check ................................................................................................................109
Control panel service check ............................................................................................................................110
Toner starvation service check .......................................................................................................................110
USB print service check...................................................................................................................................111
Network service check....................................................................................................................................112
Input option hardware errors...............................................................................................................115
3yy error messages .........................................................................................................................................115
Option tray pick/lift motor service check .......................................................................................................117
Option tray separator/pass through motor service check..............................................................................117
Option tray ACM motor service check............................................................................................................118
Option tray controller card service check.......................................................................................................118
Service menus..........................................................................................119
Understanding the printer control panel..............................................................................................119
Using the printer control panel.......................................................................................................................119
Understanding the colors of the indicator and Sleep button lights................................................................120
Menus list..............................................................................................................................................120
Diagnostics menu..................................................................................................................................121
Entering the Diagnostics menu.......................................................................................................................121
Status/Supplies ...............................................................................................................................................121
Registration.....................................................................................................................................................121
Print Tests .......................................................................................................................................................122
Print Quality Pages..........................................................................................................................................122
Hardware Tests ............................................................................................................................................... 123
Duplex Tests....................................................................................................................................................124
Input Tray Tests ..............................................................................................................................................126
Output Bin Tests ............................................................................................................................................. 127
Base Sensor Test .............................................................................................................................................128
Device Tests ....................................................................................................................................................128
Printer Setup...................................................................................................................................................129
EP Setup ..........................................................................................................................................................130
Reports ...........................................................................................................................................................132
Event Log ........................................................................................................................................................132
Exit Diags.........................................................................................................................................................133
Configuration menu..............................................................................................................................134
Entering the Configuration menu ...................................................................................................................134
4514
Table of contents
6
Status/Supplies ...............................................................................................................................................134
Print Quality Pages..........................................................................................................................................134
Reports ...........................................................................................................................................................134
Tray Linking.....................................................................................................................................................134
Panel Menus ...................................................................................................................................................135
PPDS Emulation ..............................................................................................................................................135
Download Emuls ............................................................................................................................................. 135
Safe Mode.......................................................................................................................................................135
Factory Defaults..............................................................................................................................................135
Energy Conserve .............................................................................................................................................136
Paper Prompts ................................................................................................................................................136
Envelope Prompts...........................................................................................................................................136
Action for Prompts..........................................................................................................................................137
Font Density....................................................................................................................................................137
Font Sharpening..............................................................................................................................................137
Reduced Curl...................................................................................................................................................137
A5 Loading ......................................................................................................................................................138
UI Automation ................................................................................................................................................138
Clear Supply Usage History .............................................................................................................................138
Clear Custom Status........................................................................................................................................138
USB Speed.......................................................................................................................................................139
Automatically Display Error Screens ...............................................................................................................139
USB PnP ..........................................................................................................................................................139
Entering Invalid engine mode................................................................................................................139
Entering Recovery mode.......................................................................................................................140
Accessing the Network SE menu...........................................................................................................140
Service engineer menu..........................................................................................................................140
Accessing the service engineer (SE) menu...................................................................................................... 140
Service engineer (SE) menu ............................................................................................................................140
Repair information...................................................................................143
Removal precautions.............................................................................................................................143
Data security notice ........................................................................................................................................143
Handling ESDsensitive parts ..........................................................................................................................143
Controller board/control panel replacement .................................................................................................144
Restoring the printer configuration after replacing the controller board ......................................................145
Restoring solutions, licenses, and configuration settings ...............................................................................148
Updating the printer firmware ....................................................................................................................... 149
Using the flash drive...................................................................................................................................149
Using a network computer.........................................................................................................................150
Backing up eSF solutions and settings ............................................................................................................150
Ribbon cable connectors ................................................................................................................................151
Zero Insertion Force (ZIF) connectors ........................................................................................................151
4514
Table of contents
7
Horizontal top contact connector ..............................................................................................................152
Horizontal bottom contact connector........................................................................................................155
Vertical mount contact connector .............................................................................................................158
Horizontal sliding contact connector .........................................................................................................161
Low Insertion Force (LIF) connector........................................................................................................... 164
Printhead assembly adjustments....................................................................................................................165
Removal procedures.............................................................................................................................168
Left side removals.................................................................................................................................168
Left cover removal ..........................................................................................................................................168
Main drive gearbox removal...........................................................................................................................169
MPF solenoid removal ....................................................................................................................................171
MPF gearbox removal.....................................................................................................................................174
Reverse solenoid removal...............................................................................................................................177
ACM clutch removal........................................................................................................................................178
Cartridge gearbox removal .............................................................................................................................183
Duplex gear assembly removal .......................................................................................................................183
Right side removals...............................................................................................................................185
Right cover removal........................................................................................................................................185
Cooling fan duct removal................................................................................................................................186
Cooling fan removal........................................................................................................................................186
Controller board removal ...............................................................................................................................187
Toner cartridge smart chip contact removal ..................................................................................................188
Front removals......................................................................................................................................190
Left front mount removal ...............................................................................................................................190
Right front mount removal .............................................................................................................................192
Transfer roll removal ......................................................................................................................................194
Cartridge plunger removal..............................................................................................................................195
Bezel removal ................................................................................................................................................. 198
Nameplate removal ........................................................................................................................................199
Control panel assembly removal ....................................................................................................................199
UICC removal ..................................................................................................................................................202
MPF assembly removal...................................................................................................................................203
MPF pick roller cover removal ........................................................................................................................ 206
MPF pick roller removal..................................................................................................................................206
Bail removal ....................................................................................................................................................207
Jam access cover removal...............................................................................................................................207
Front door removal.........................................................................................................................................208
Front access cover removal ............................................................................................................................211
Front door sensor removal .............................................................................................................................211
Front input guide removal ..............................................................................................................................212
Separator pad removal ...................................................................................................................................214
Bottom removals...................................................................................................................................216
Power supply removal ....................................................................................................................................216
Power supply shield removal.......................................................................................................................... 217
4514
Table of contents
8
Duplex removal............................................................................................................................................... 218
Duplex sensor and input sensor removal ....................................................................................................... 219
Toner density sensor removal ........................................................................................................................221
Trailing edge sensor removal..........................................................................................................................222
ACM assembly removal ..................................................................................................................................226
Rear side removals................................................................................................................................232
Dust cover removal.........................................................................................................................................232
Rear door and cover removal .........................................................................................................................232
Narrow media/bin full sensor removal...........................................................................................................233
Redrive assembly removal ..............................................................................................................................235
Redrive shaft removal.....................................................................................................................................236
Fuser removal .................................................................................................................................................238
Top side removals.................................................................................................................................239
Top cover removal ..........................................................................................................................................239
Laser scanning unit (LSU) removal..................................................................................................................240
250/550-sheet option tray removals....................................................................................................242
Pick roller removal ..........................................................................................................................................242
Separator roll assembly removal ....................................................................................................................243
ACM assembly removal ..................................................................................................................................245
Component locations...............................................................................249
Exterior locations..................................................................................................................................249
Front view .......................................................................................................................................................249
Rear view ........................................................................................................................................................250
Maintenance............................................................................................251
Inspection guide....................................................................................................................................251
Lubrication specification.......................................................................................................................251
Cleaning the printer..............................................................................................................................252
Parts catalog............................................................................................254
Legend...................................................................................................................................................254
Assembly 1: Covers................................................................................................................................255
Assembly 2: Electronics 1......................................................................................................................257
Assembly 3: Electronics 2......................................................................................................................259
Assembly 4: Frame................................................................................................................................262
Assembly 5: Option trays......................................................................................................................265
Assembly 6: Power cords......................................................................................................................267
Assembly 7: Miscellaneous...................................................................................................................269
4514
Table of contents
9
Appendix A: Printer specifications............................................................271
Product power consumption.................................................................................................................271
Electrical specifications.........................................................................................................................271
Operating clearances.............................................................................................................................272
Acoustics...............................................................................................................................................272
Operating environment.........................................................................................................................273
Appendix B: Options and features............................................................275
Available internal options.....................................................................................................................275
Media handling options.........................................................................................................................275
Appendix C: Theory of operation..............................................................277
POR sequence.......................................................................................................................................277
Printer control.......................................................................................................................................277
Paper path information.........................................................................................................................277
Input tray ........................................................................................................................................................277
Multipurpose feeder (MPF) ............................................................................................................................277
Simplex printing ..............................................................................................................................................278
Duplex printing ...............................................................................................................................................279
Media handling components.................................................................................................................280
Main drive gearbox.........................................................................................................................................280
Autocompensator mechanism (ACM) ............................................................................................................280
Key components....................................................................................................................................281
Sensors............................................................................................................................................................281
Other key components ...................................................................................................................................282
Electrophotographic process (EP process)............................................................................................283
Appendix D: Acronyms.............................................................................287
Index........................................................................................................289
Part number index...................................................................................295
Part name index.......................................................................................299
4514
Table of contents
10
Notices and safety information
Laser notices
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I
(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser-Hinweis
Der Drucker wurde in den USA zertifiziert und entspricht den DHHS-Vorschriften 21 CFR, Kapitel I, Unterkapitel J für
Laserprodukte der Klasse I (1); andernorts ist er als Laserprodukt der Klasse I zertifiziert, das den IEC 60825-1-
Anforderungen entspricht.
Laserprodukte der Klasse I werden nicht als gefährlich eingestuft. Der Drucker enthält im Inneren einen Laser der
Klasse IIIb (3b), und zwar einen 7-Milliwatt-Gallium-Arsenid-Laser, der im Wellenlängenbereich von 655 bis 675
Nanometern arbeitet. Das Lasersystem und der Drucker sind so konstruiert, dass unter normalen Betriebsbedingungen,
bei der Wartung durch den Benutzer oder bei den vorgeschriebenen Wartungsbedingungen Menschen keiner
Laserstrahlung ausgesetzt sind, die die Werte für Klasse I überschreitet.
Avis relatif à l'utilisation du laser
L'imprimante est certifiée conforme aux exigences de la réglementation des Etats-Unis relative aux produits laser (DHHS
21 CFR, Chapter I, Subchapter J for Class I (1)). Pour les autres pays, elle est certifiée conforme aux exigences des normes
IEC 60825-1 relatives aux produits laser de classe I.
Les produits laser de Classe I ne sont pas considérés comme dangereux. L'imprimante contient un laser de classe IIIb
(3b), laser arséniure de gallium 7 milliwatts opérant sur une longueur d'onde de l'ordre de 655 à 675 nanomètres. Le
système laser ainsi que l'imprimante ont été conçus de manière à ce que personne ne soit exposé à des rayonnements
laser dépassant le niveau de classe I dans le cadre d'un fonctionnement normal, de l'entretien par l'utilisateur ou de la
maintenance.
Avvertenze sui prodotti laser
La stampante è certificata negli Stati Uniti come stampante conforme ai requisiti DHHS 21 CFR, Capitolo I, Sottocapitolo
J per i prodotti laser di Classe I (1), mentre in altri paesi è certificata come prodotto laser di Classe I conforme ai requisiti
IEC 60825-1.
I prodotti laser di Classe I non sono considerati pericolosi. La stampante contiene un laser di Classe IIIb (3b), che è
nominalmente un laser ad arseniuro di gallio a 7 milliwatt funzionante a una lunghezza d'onda di 655-675 nanometri.
Il sistema laser e la stampante sono stati progettati in modo da impedire l'esposizione a radiazioni laser superiori al
livello previsto dalla Classe I durante le normali operazioni di stampa, manutenzione o assistenza.
4514
Notices and safety information
11
Aviso de láser
Esta impresora se ha certificado en EE. UU. de conformidad con los requisitos de DHHS 21 CFR, capítulo I, subcapítulo
J, para los productos láser de Clase I (1), y en otros países está certificada como un producto láser de Clase I de acuerdo
con los requisitos de IEC 60825-1.
Los productos láser de Clase I no se consideran peligrosos. La impresora contiene un láser interno de Clase IIIb (3b) que
nominalmente es un láser de arseniuro de galio de 7 milivatios que funciona en una longitud de onda de 655-675
nanómetros. El sistema láser y la impresora se han diseñado para que ningún individuo acceda nunca a las radiaciones
láser por encima del nivel de Clase I durante su uso normal, ni en tareas de mantenimiento o intervenciones de servicio
técnico prescritas.
Aviso sobre laser
A impressora foi certificada nos EUA por estar em conformidade com os requisitos do DHHS 21 CFR, capítulo I,
subcapítulo J, para produtos a laser de Classe I (1) e, nos demais países, foi certificada como produto a laser de Classe
I em conformidade com os requisitos da IEC 60825-1.
Os produtos a laser de Classe I não são considerados perigosos. A impressora contém, internamente, um laser de Classe
IIIb (3b) que é um laser de arsenieto de gálio de 7 miliwatts operando no comprimento de onda de 655-675 nanômetros.
O sistema do laser e a impressora foram projetados para que jamais haja acesso humano à radiação do laser acima do
nível da Classe I durante a operação normal ou a manutenção pelo usuário ou sob as condições de manutenção
prescritas.
Laserinformatie
Deze printer is in de Verenigde Staten gecertificeerd als een product dat voldoet aan de vereisten van DHHS 21 CFR,
hoofdstuk 1, paragraaf J voor laserproducten van klasse I (1). Elders is de printer gecertificeerd als een laserproduct
van klasse I dat voldoet aan de vereisten van IEC 60825-1.
Laserproducten van klasse I worden geacht geen gevaar op te leveren. De printer bevat intern een laser van klasse IIIb
(3b), een galliumarsenide laser met een nominaal vermogen van 7 milliwatt en een golflengtebereik van 655-675
nanometer. Het lasersysteem en de printer zijn zodanig ontworpen dat gebruikers nooit blootstaan aan laserstraling
die hoger is dan het toegestane niveau voor klasse I-apparaten, tijdens normaal gebruik, onderhoudswerkzaamheden
door de gebruiker of voorgeschreven servicewerkzaamheden.
Lasererklæring
Denne printer er certificeret i USA i henhold til kravene i DHHS 21 CFR, afsnit I, underafsnit J, for Klasse I-laserprodukter
(1) og certificeret andetsteds som et Klasse I-laserprodukt i henhold til kravene i IEC 60825-1.
Klasse I-laserprodukter anses ikke for at være farlige. Printeren indeholder internt en klasse IIIb (3b)-laser, der nominelt
er en 7 milliwatt galliumarsenid-laser, som fungerer i bølgelængdeområdet 655-675 nanometer. Lasersystemet og
printeren er udviklet på en sådan måde, at der ikke er en direkte laserstråling, der overskrider Klasse I-niveauet under
normal brug, brugers vedligeholdelse eller de foreskrevne servicebetingelser.
Laserilmoitus
Tämä tulostin on sertifioitu Yhdysvalloissa DHHS 21 CFR, Chapter I, Subchapter J -standardin mukaiseksi luokan I (1) -
lasertuotteeksi ja muualla IEC 60825-1 -standardin mukaiseksi luokan I lasertuotteeksi.
4514
Notices and safety information
12
Luokan I lasertuotteita ei pidetä haitallisina. Tulostimen sisällä on luokan IIIb (3b) laser, joka on nimellisteholtaan 7
mW:n galliumarsenidilaser ja toimii 655–675 nanometrin aallonpituuksilla. Laserjärjestelmä ja tulostin ovat
rakenteeltaan sellaisia, että käyttäjä ei joudu alttiiksi luokkaa 1 suuremmalle säteilylle normaalin käytön, ylläpidon tai
huollon aikana.
Lasermeddelande
Skrivaren är certifierad i USA enligt kraven i DHHS 21 CFR, avsnitt I, underavsnitt J för laserprodukter av klass I (1) och
i andra länder är den certifierad som en laserprodukt av klass I som uppfyller kraven i IEC 60825-1.
Laserprodukter av klass I anses inte vara skadliga. Skrivaren innehåller en klass IIIb (3b)-laser, vilket är en 7 mW
galliumarseniklaser som arbetar inom en våglängd på 655–675 nm. Lasersystemet och skrivaren är utformade så att
människor aldrig utsätts för laserstrålning över klass I-nivå under normala förhållanden vid användning, underhåll eller
service.
Lasermerknad
Skriveren er sertifisert i USA for samsvar med kravene i DHHS 21 CFR, kapittel I, underkapittel J for laserprodukter av
klasse I (1), og er andre steder sertifisert som et laserprodukt av klasse I som samsvarer med kravene i IEC 60825-1.
Laserprodukter av klasse I anses ikke som helseskadelige. Skriveren inneholder en intern laser av klasse IIIb (3b) som
nominelt er en 7 milliwatt galliumarsenid-laser, og som opererer i bølgelengder på 655-675 nanometer. Lasersystemet
og skriveren er utformet slik at mennesker ikke utsettes for laserstråling utover nivået i klasse I under normal drift,
vedlikehold eller foreskrevet service.
Avís sobre el làser
Als EUA, la impressora està certificada de conformitat amb els requisits del capítol I, apartat J del CFR 21 del Departament
de Salut i Serveis Humans per a productes làser de classe I (1) i a la resta de països està certificada com a producte làser
de classe I d'acord amb els requisits de la norma IEC 60825-1.
Els productes làser de classe I no es consideren perillosos. A l'interior de la impressora hi ha un làser de classe IIIb (3b)
que nominalment es un arsenur de galió de 7 mil·liwatts que funciona a una longitud d'ona de 655-675 nanòmetres.
El sistema làser y la impressora s'han dissenyat amb l'objectiu d'impedir l'accés humà de la radiació làser superior al
nivell de classe I durant un funcionament normal, el manteniment per part de l'usuari o les condicions de servei
prescrites.
レーザーに関する通知
本機は、米国においてクラス I1)レーザー製品に対する DHHS 21 CFRChapter ISubchapter J の要件に準
拠し、その他の国で IEC 60825-1 の要件に準拠するクラス I ーザー製品として認可されています。
クラス I レーザー製品は、危険性がないとみなされています。 本機には、クラス IIIb3b)レーザーが内蔵
されています。これは、655 675 ナノメートルの波長で動作する定格 7 ミリワットのガリウムヒ素レーザ
ーです。 レーザーシステムとプリンタは、通常の操作、ユーザーによるメンテナンス、または所定のサー
ビス条件の下で、ユーザーがクラス I レベルを超えるレーザー放射に絶対にさらされないように設計されて
います。
레이저 관련 공지
프린터는 미국에서 DHHS 21 CFR, Chapter I, Subchapter J 요구 사항을 수하는 클래스 I(1) 레이저 제품
승인되었으며 이외 지역에서 IEC 60825-1 요구 사항을 준수하는 클래스 I 레이저 제품으로 승인되었습니다.
4514
Notices and safety information
13
Class I 레이저 제품은 위험한 제품으로 간주되지 않습니다. 프린터에는 655-675 나노미터 파장 영역에서 작동
하는 공칭 7 밀리와트 갈륨 비소 레이저 클래스 IIIb(3b) 레이저가 내부에 포함되어 있습니다. 레이저 시스템
프린터는 정상적인 작동, 사용 유지 관리 또는 사전 설명된 서비 조건에는 람에게 클래스 I 수준 이상
레이저 방사가 출되지 않도록 설계되었습니다.
激光注意事
本打印机在美国认证合乎 DHHS 21 CFR Chapter ISubchapter J I1)激品的准,而在其他地区
认证是合乎 IEC 60825-1 的分 I 激光品。
一般认为 I 激光品不具有危性。本打印机内部含有分 IIIb3b)的激光,在操作程中会
7 毫瓦的砷化激光,其波 655-675nm 。本激光系及打印机的设计,在一般操作、使用者维护
定内的修情况下,不会使人体接触分 I 以上等射。
雷射聲明
本印表機係經過美國核可,符合 DHHS 21 CFRChapter ISubchapter J 規定的 I (1) 級雷射品激光注意事
在美國以外的地區,為符合 IEC 60825-1 規定的 I 級雷品。
根據 I 級雷射品的規定,這類品不會對人體造成傷害。本機所採用 IIIb (3b) 級雷射只 7 百萬分之
一瓦特 (milliwatt)、波長 655 675 億分之一米 (nanometer) 的鎵砷放射線 (gallium arsenide laser)。使用者只要
以正確的方法操作及維護保養,並依照先前所述之維修方式進行修護,此印表機與其雷射系統不會 I
以上的放射線,而對人體造成傷害。
Safety information
Safety information
The safety of this product is based on testing and approvals of the original design and specific components. The
manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.
The maintenance information for this product has been prepared for use by a professional service person and is
not intended to be used by others.
There may be an increased risk of electric shock and personal injury during disassembly and servicing of this product.
Professional service personnel should understand this and take necessary precautions.
CAUTION—POTENTIAL INJURY
The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium
battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used
lithium batteries according to the manufacturer's instructions and local regulations.
Consignes de sécurité
La sécurité de ce produit repose sur des tests et des agréations portant sur sa conception d'origine et sur des
composants particuliers. Le fabricant n'assume aucune responsabilité concernant la sécurité en cas d'utilisation de
pièces de rechange non agréées.
Les consignes d'entretien et de réparation de ce produit s'adressent uniquement à un personnel de maintenance
qualifié.
Le démontage et l'entretien de ce produit pouvant présenter certains risques électriques, le personnel d'entretien
qualifié devra prendre toutes les précautions nécessaires.
4514
Notices and safety information
14
AVERTISSEMENT—RISQUE DE BLESSURE
La batterie lithium de ce produit n'est pas destinée à être remplacée. Il existe un risque d'explosion si une
batterie lithium est placée de façon incorrecte. Ne rechargez pas, ne démontez pas et n’incinérez pas une
batterie lithium. Mettez les batteries lithium usagées au rebut selon les instructions du fabricant et les
réglementations locales.
Norme di sicurezza
La sicurezza del prodotto si basa sui test e sull'approvazione del progetto originale e dei componenti specifici. Il
produttore non è responsabile per la sicurezza in caso di sostituzione non autorizzata delle parti.
Le informazioni riguardanti la manutenzione di questo prodotto sono indirizzate soltanto al personale di assistenza
autorizzato.
Durante lo smontaggio e la manutenzione di questo prodotto, il rischio di subire scosse elettriche e danni alla
persona è più elevato. Il personale di assistenza autorizzato deve, quindi, adottare le precauzioni necessarie.
ATTENZIONE — PERICOLO DI LESIONI
La batteria al litio presente del prodotto non deve essere sostituita. In caso di sostituzione errata della
batteria al litio, potrebbe verificarsi un'esplosione. Non ricaricare, smontare o bruciare batterie al litio.
Smaltire le batterie al litio usate seguendo le istruzioni del produttore e le norme locali.
Sicherheitshinweise
Die Sicherheit dieses Produkts basiert auf Tests und Zulassungen des ursprünglichen Modells und bestimmter
Bauteile. Bei Verwendung nicht genehmigter Ersatzteile wird vom Hersteller keine Verantwortung oder Haftung
für die Sicherheit übernommen.
Die Wartungsinformationen für dieses Produkt sind ausschließlich für die Verwendung durch einen
Wartungsfachmann bestimmt.
Während des Auseinandernehmens und der Wartung des Geräts besteht ein zusätzliches Risiko eines elektrischen
Schlags und körperlicher Verletzung. Das zuständige Fachpersonal sollte entsprechende Vorsichtsmaßnahmen
treffen.
VORSICHT - VERLETZUNGSGEFAHR
Die Lithiumbatterie in diesem Produkt darf nicht ausgetauscht werden. Wird eine Lithiumbatterie nicht
ordnungsgemäß ausgetauscht, besteht Explosionsgefahr. Lithiumbatterien dürfen auf keinen Fall wieder
aufgeladen, auseinander genommen oder verbrannt werden. Befolgen Sie zum Entsorgen verbrauchter
Lithiumbatterien die Anweisungen des Herstellers und die örtlichen Bestimmungen.
Pautas de Seguridad
La seguridad de este producto se basa en pruebas y aprobaciones del diseño original y componentes específicos.
El fabricante no es responsable de la seguridad en caso de uso de piezas de repuesto no autorizadas.
La información sobre el mantenimiento de este producto está dirigida exclusivamente al personal cualificado de
mantenimiento.
Existe mayor riesgo de descarga eléctrica y de daños personales durante el desmontaje y la reparación de la máquina.
El personal cualificado debe ser consciente de este peligro y tomar las precauciones necesarias.
PRECAUCIÓN: POSIBLES DAÑOS PERSONALES
La batería de litio de este producto no debe reemplazarse. Existe riesgo de explosión si se sustituye
incorrectamente una batería de litio. No recargue, desmonte ni incinere una batería de litio. Deseche las
baterías de litio según las instrucciones del fabricante y las normativas locales.
4514
Notices and safety information
15
Informações de Segurança
A segurança deste produto baseia-se em testes e aprovações do modelo original e de componentes específicos. O
fabricante não é responsável pela segunrança, no caso de uso de peças de substituição não autorizadas.
As informações de segurança relativas a este produto destinam-se a profissionais destes serviços e não devem ser
utilizadas por outras pessoas.
Risco de choques eléctricos e ferimentos graves durante a desmontagem e manutenção deste produto. Os
profissionais destes serviços devem estar avisados deste facto e tomar os cuidados necessários.
ATENÇÃO — RISCO DE FERIMENTO
A bateria de lítio neste produto não deve ser substituída. Existe o risco de explosão se uma bateria de lítio
for substituída incorretamente. Não recarregue, desmonte ou incinere uma bateria de lítio. Descarte as
baterias de lítio usadas de acordo com as instruções do fabricante e regulamentos locais.
Informació de Seguretat
La seguretat d'aquest producte es basa en l'avaluació i aprovació del disseny original i els components específics.
El fabricant no es fa responsable de les qüestions de seguretat si s'utilitzen peces de recanvi no autoritzades.
La informació pel manteniment d’aquest producte està orientada exclusivament a professionals i no està destinada
a ningú que no ho sigui.
El risc de xoc elèctric i de danys personals pot augmentar durant el procés de desmuntatge i de servei d’aquest
producte. El personal professional ha d’estar-ne assabentat i prendre les mesures convenients.
ATENCIÓ
La bateria de liti d'aquest producte no ha estat dissenyada perquè es substitueixi. Hi ha perill d’explosió si
no es substitueix correctament la bateria de liti. No recarregueu, desmunteu o incinereu una bateria de
liti. Desfeu-vos de les bateries de liti usades d’acord amb les instruccions del fabricant i les regulacions
locals.
안전 사항
제품은 원래 설계및특정 구성에 대한 테스트 결과 안정 성이 입증된 것입니다. 따라서 무허가 교체부품
사용하는 에는 제조업체에서 안전에 대한 책임을 지지 않습니다.
제품에 관한 유지 보수 설명 서는 전문 서비스 기술자 용으로 작성된 것이므로, 전문가는 사용할
습니다.
제품을 해체하거나 정비할 경우, 기전 받거나 처를 입을 위험이 커집니다. 전문 서비스
기술자는 사실 숙지하고, 필요한 예방조치를 취하도록 하십시오.
주의부상 위험
제품에 들어 있는 리튬 배터리는 교체할 없습니다. 리튬 배터리를 잘못 교체하면 폭발 위험
있습니다. 리튬 배터리를 재충전하거나, 분해하거나, 태우지 마십시오. 제조업체의 지침과 지역
규정에 따라 리튬 배터리를 폐기하십시오.
安全信息
品的安全性以原来设计和特定品的测试结果和认证为。万一使用经许可的替部件,制造商
安全性负责
品的维护信息专业使用,并不打算其他人使用。
品在拆卸、,遭受电击或人的危性会增高,专业员对这点必有所了触,并采
取必要的防措施。
4514
Notices and safety information
16
当心一可能的
品中的锂电池不可更。如果不正确换锂电池,可能会有爆炸危。不要再 、拆解或
烧锂电
弃旧的锂电时应按照制造商的指及当地法规进
4514
Notices and safety information
17
4514
18
Preface
This manual contains maintenance procedures for service personnel.
It is divided into the following chapters:
General information contains a general description of the printer. Special tools and test equipment are discussed.
Diagnostic information contains diagnostic aids you can use to isolate failing FRUs. These diagnostic aids include
error code tables, symptom tables, and service checks.
Service menus contains descriptions of the printer interface, the user and service menus.
Repair information provides instructions for making printer adjustments and removing and installing FRUs.
Component locations uses illustrations to identify the basic printer parts.
Maintenance contains the lubrication specifications and recommendations to prevent problems.
Parts catalog contains illustrations and part numbers for individual FRUs.
Appendix A: Printer specifications contains detailed specifications about the product.
Appendix B: Options and features contains the available options and other features of the product.
Appendix C: Theory of operation contains the theory of operation.
Appendix D: Acronyms contains the list of acronyms in the manual and their meanings.
Service manual conventions
Note: A note provides additional information.
Warning—Potential Damage: A warning identifies something that might damage the product hardware or software.
This service manual uses several different types of caution statements:
CAUTION—POTENTIAL INJURY: A caution identifies something that might cause the service technician harm.
CAUTION—SHOCK HAZARD: This type of caution indicates a danger from hazardous voltage in the area of the
product where you are working. Unplug the product before you start working, or use caution if the product
must receive power to perform the task.
CAUTION—HOT SURFACE: This type of caution indicates a hot surface.
CAUTION—TIPPING HAZARD: This type of caution indicates a tipping hazard.
4514
Preface
19
4514
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303

Lexmark MS315 Manuale utente

Categoria
Stampanti laser / LED
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue