Yamaha TSX-B235 Black Manuale utente

Categoria
Lettore CD
Tipo
Manuale utente
G
Printed in Malaysia ZR50350
© 2015 Yamaha Corporation
DESKTOP AUDIO SYSTEM
SYSTEME AUDIO DESKTOP
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
English Français Deutsch Svenska Italiano Español Nederlands Русский
i En
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit in a well ventilated, cool, dry, clean place -
away from direct sunlight, heat sources, vibration, dust,
moisture and cold. For proper ventilation, allow the
following minimum clearances.
Top: 15 cm (6 in)
Rear: 10 cm (4 in)
Sides: 10 cm (4 in)
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit, which
may cause an electrical shock, fire, damage to this unit,
and/or personal injury.
5 Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage other
than specified.
13 To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or this unit during a
lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed.
The cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the
wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit
is faulty.
17 Before moving this unit, press to set the unit to off,
and disconnect the AC power plug from the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may become
warm. Turn off, then leave this unit alone for cooling.
20 Install this unit near the wall outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like. When you dispose of
batteries, follow your regional regulations.
Keep the batteries in a location out of reach of children.
Batteries can be dangerous if a child were to put in his or
her mouth.
If the batteries grow old, the effective operation range of
the remote control decreases considerably. If this happens,
replace the batteries with new one as soon as possible.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have the
same shape and color.
Exhausted batteries may leak. If the batteries have leaked,
dispose of them immediately. Avoid touching the leaked
material or letting it come into contact with clothing, etc.
Clean the battery compartment thoroughly before
installing new batteries.
If you plan not to use the unit for a long period of time,
remove the batteries from the unit. Otherwise, the batteries
will wear out, possibly resulting in a leakage of battery
liquid that may damage the unit.
Do not throw away batteries with general house waste.
Dispose of them correctly in accordance with your local
regulations.
22 Excessive sound pressure from earphones and headphones
can cause hearing loss.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off by . In this state, this unit is designed
to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
There is a chance that placing this unit too close to a CRT-
based (Braun tube) TV set might impair picture color.
Should this happen, move this unit away from the TV set.
1 En
English
NAMES OF PARTS AND THEIR FUNCTIONS ........2
Top panel / Front panel..................................................2
Front panel display.........................................................3
Rear panel......................................................................3
Remote control...............................................................4
TURNING THE UNIT ON...........................................5
ADJUSTING THE CLOCK ........................................5
ADJUSTING THE TONE (remote control only)......6
ADJUSTING THE BRIGHTNESS OF THE FRONT
PANEL DISPLAY (remote control only) .................6
CHARGING WITH THE CHARGING PORT .............6
LISTENING TO CD AND USB DEVICES .................7
Listening to a CD............................................................7
Listening to a USB device..............................................8
Using repeat/shuffle playback (remote control only)......9
LISTENING TO EXTERNAL SOURCES...................9
LISTENING TO MUSIC FROM YOUR Bluetooth
COMPONENT..........................................................10
Playing back from your Bluetooth component..............10
Connecting an already-paired component via
Bluetooth
... 11
Disconnecting a Bluetooth connection.........................12
LISTENING TO DAB STATIONS (TSX-B235D only) ...12
Preparing for DAB reception ........................................12
Selecting DAB stations.................................................13
Presetting DAB stations (remote control only) .............14
Selecting preset DAB stations......................................14
LISTENING TO FM STATIONS ..............................15
Selecting an FM station................................................15
Presetting FM stations (remote control only) ...............16
Selecting preset FM stations........................................17
USING THE ALARM FUNCTION (IntelliAlarm).....18
Setting the alarm..........................................................19
Operations while the alarm sound is playing................20
USING THE “DTA CONTROLLER” .......................21
USING THE SLEEP TIMER ....................................21
SETTING AUTO POWER STANDBY FUNCTION
(main unit only) ......................................................21
TROUBLESHOOTING ............................................22
NOTES ON DISCS AND USB DEVICES................25
SPECIFICATIONS...................................................26
CONTENTS
Play back music from external devices such as your audio/data CDs, USB devices, or external devices via the AUX jack,
and listen to the radio.
(TSX-B235D only) Listen to the DAB radio.
•By the Bluetooth technology, you can enjoy clear sound without wire connections. One touch pairing enabled by NFC
technology.
Use your favorite music or a beep tone as an alarm. When the set time arrives, the music you select is played at the
volume that you specify, giving you the ideal start to your day (IntelliAlarm function).
By using the free “DTA CONTROLLER” application for a smartphone and tablet computer, you can control this unit and
take advantage of more sophisticated alarm functionality (+ P. 21).
You can easily store and recall of your favorite radio stations, up to 30 FM and 30 DAB stations (DAB function is only
for TSX-B235D).
Bass, middle, and treble can be adjusted to your taste.
About this manual
References to the iPod appearing in this manual also include the iPhone and iPad.
If an operation can be performed using either the buttons on the unit itself or from the remote control, the explanation will
focus on operation using the main uint.
indicates precautions for use of the unit and its feature limitations.
indicates supplementary explanations for better use.
How to use the remote control Installing batteries in the remote control
Features
Supplied accessories
Batteries (x 2)
(AAA, R03, UM-4)
FM antenna
(for TSX-B235)
Remote control DAB/FM antenna
(for TSX-B235D)
USB cap (x 2)
Keep the USB cap out
of reach of children so
as to ensure that it is
not mistakenly
swallowed.
Within 6 m (20')
Check the “+” and “-” of the
batteries and insert them the
correct way around.
(at the end of this manual)
Additional information............................................i
2 En
1 VOLUME / +
Adjust the volume.
2 (Power)
Press to turn the unit on/off (standby).
There are two types of the standby state (+ P. 5).
3 Source buttons
Switch the audio source to be played.
If you press one of these while the unit is in standby
(except ECO standby), the unit will turn on and then
switch the audio source.
(TSX-B235D only) When listening to the radio, press
RADIO to switch between DAB/FM.
4 NFC mark
Allows easy pairing with NFC technology (+ P. 11).
5 Audio control buttons
Use these to operate the CD/USB device.
6 SNOOZE/SLEEP
Set the sleep timer or switch the alarm to snooze mode
(+ P. 20, 21).
7 CHARGING port
This port is for use to charge only.
Supplies 5V/1.0A to a portable device, such as a
smartphone, when it is connected with a USB cable
(+ P. 6).
When the USB device is not in use, put the USB cap in place to
protect the connector.
8 USB port
Connect and play your USB device here (+ P. 8).
When the USB device is not in use, put the USB cap in place to
protect the connector.
9 PRESET /
Select a radio station that you stored (+ P. 16, 17).
0 TUNING /
Tune the radio (+ P. 15, 16).
A (Headphone jack)
Connect headphones here.
B ALARM
Switch the alarm on/off (+ P. 20).
C SET
Set the alarm (+ P. 19).
D –/+
Select an item or value when setting the clock or the
alarm.
E EJECT
Eject the CD.
F Disc slot
Insert a CD here (+ P. 7).
G ENTER
Confirm a selected item or value.
H Front panel display
The clock and other information is displayed here
(+ P. 3).
NAMES OF PARTS AND THEIR FUNCTIONS
Top panel / Front panel
A
3
7 9 054612
CB GD FE H
8
: Stop
: Play/Pause
/ :
Skip, Search backward/forward (press and hold
down)
3 En
NAMES OF PARTS AND THEIR FUNCTIONS
English
1 Illumination sensor
Detect ambient lighting. Do not cover this sensor
(+ P. 6).
2 Alarm time
Indicates the alarm time (+ P. 19).
3 Repeat/shuffle indicator
Displays the playback mode (+ P. 9).
4 Secondary indicator (TSX-B235D only)
Turns on if a secondary station is playing when you
listen to a DAB station.
5 Multi-function indicator
Displays various information, including the clock time,
information about the currently-playing track, and the
frequency of the radio station.
6 Remote control signal receiver
Make sure that this sensor is not obstructed (+ P. 1).
7 Weekly alarm indicator
Shows alarm information specified using the free “DTA
CONTROLLER” application for a smartphone and
tablet computer (+ P. 21).
8 Alarm indicator
Turns on if the alarm has been set (+ P. 20).
9 Sleep indicator
Turns on if the sleep timer has been set (+ P. 21).
1 CLOCK switch
Sets the clock and specifies whether the clock will be
displayed (+ P. 5).
2 AUX
Use a commercially available 3.5 mm mini-plug cable
to connect your external device here (+ P. 9).
3 DAB/FM antenna connector
Connect the DAB/FM antenna here.
If reception is poor, try changing the height or direction of the
antenna, or move the unit to find a location that has better
reception.
If you use a commercially available outdoor antenna instead of
the supplied antenna, reception may be better.
Front panel display
~~~~~~
~~~~~~
65
7
21
8 9
3 4
Rear panel
FM ANT
ON
CLOCK AUX
SET OFF
1 2 3
(TSX-B235)
SET:
Set the clock.
ON:
Even when the unit is off, the clock will be
displayed and the alarm function will be available.
OFF:
When the unit is off, the clock will not be displayed
and the alarm function will not be available
.
FM ANT
Be sure to stretch out the antenna.
NAMES OF PARTS AND THEIR FUNCTIONS
4 En
1 Remote control signal transmitter
2 (Power)
Press to turn the unit on/off (standby).
There are two types of the standby state (+ P. 5).
3 SNOOZE/SLEEP
Set the sleep timer or switch the alarm to snooze mode
(+ P. 20, 21).
4 ALARM
Switch the alarm on/off (+ P. 20).
5 Source buttons
Switch the audio source to be played. If you press one of
these while the unit is in standby (except ECO standby),
the unit will automatically turn on and then switch the
audio source..
(TSX-B235D only) When listening to the radio, press
RADIO to switch between DAB/FM.
6 Item selection buttons
FOLDER S/T: Select items or switch the playback
folder when playing music on data
CDs or USB devices.
ENTER: Confirm a selected item.
7 Audio control buttons
Use these to operate the CD/USB device.
8 (Repeat)/ (Shuffle)
Play music on a CD or USB device in repeat/shuffle
mode (+ P. 9).
9 EQ: LOW/MID/HIGH
Adjust the bass, middle or treble sound quality
(+ P. 6).
0 TUNING /
Tune the radio (+ P. 15, 16).
A PRESET /
Select a radio station that you stored (+ P. 16, 17).
B MEMORY
Store a radio station (+ P. 16).
C DIMMER
Adjusts the brightness of the front panel display
(+ P. 6).
D DISPLAY
Switch the information shown in the front panel display
(+ P. 7, 8, 15).
E VOLUME +/
Adjust the volume.
F MUTE
Mute or unmute the sound.
Remote control
3
4
5
7
8
:
A
B
1
6
2
9
D
C
F
E
: Stop
: Play/Pause
/ :
Skip, Search backward/forward (press and hold
down)
5 En
English
TURNING THE UNIT ON
Connect the power cable to an AC outlet, and
press .
The unit will turn on, and will be ready to play audio
sources.
Press once again to turn the unit off (standby).
There are two types of the standby as below. The state
can be set in the rear panel CLOCK switch (+ P. 3).
Mode Clock switch Clock display
Bluetooth
connection
Charging USB
devices
(USB port and
CHARGING port)
Alarm setting
Standby ON Show Enable Enable Enable
ECO standby
(power saving
mode)
OFF No clock display Disable Enable Disable
ADJUSTING THE CLOCK
1 Set the rear panel CLOCK switch to the SET
position.
The display will indicate “CLOCK YEAR,” and the
numerical value to be set will blink.
2 Set the date and time.
Press the front panel / + buttons to edit the values,
and then press ENTER to confirm the setting.
Set the items in the order of year month day
hour minute.
When clock setting has finished, the display will
indicate “Completed!”
On step , by pressing SNOOZE/SLEEP you can select
the time format (12-hour / 24-hour).
3 Set the CLOCK switch to the ON position.
The moment you set the switch to the ON position, the
clock will start from 0 second.
The time settings will be reset if the unit remains unpowered for
more than one week.
26
Apr
15:30
CD
Display (24-hour) when the unit is on
Display (24-hour) when the unit is off (standby*)
* In ECO standby, the clock display will disappear.
ON
CLOCK AUX
SET OFF
26
Apr
Front panel
1
2
ON
CLOCK AUX
SET OFF
3
Rear panel
Rear panel
(24-hour)
Jan Feb Mar Apr May Jun
January February March April May June
Jul Aug Sep Oct Nov Dec
July August September October November December
2
6 En
ADJUSTING THE TONE (remote control only)
1 During playback, press the LOW, MID, or
HIGH EQ button on the remote control.
Select the tone to be adjusted (LOW, MID, HIGH).
2 Press S/T to adjust the tone.
3 Press ENTER on the remote control to
complete the operation.
You can also press the EQ button that you pressed in
Step to complete the settings.
If you want to adjust another frequency band, return to
step and press the EQ button for the frequency
band that you want to adjust.
ADJUSTING THE BRIGHTNESS OF THE FRONT PANEL
DISPLAY (remote control only)
Press DIMMER repeatedly on the remote
control.
The brightness of the front panel display will change in
the order shown below.
AUTO 1 (bright) 2 (medium) 3 (dim)
back to AUTO
When AUTO is set, the brightness of the front panel display is
adjusted automatically with the Illumination sensor (+ P. 3 ).
Ensure that the sensor is not covered.
CHARGING WITH THE CHARGING PORT
Connecting a USB device such as a smartphone or tablet
computer to the CHARGING port on this unit charges the
connected device (power supply of up to 5V/1.0A is
supported). Charging is possible even when the unit is
off.
Prepare a USB cable that is compatible with the USB
device.
Charging may not be possible depending on the USB device.
Yamaha will not be held responsible for any damage to the
USB device or data loss occurred while using this unit.
1
2
3
1
1
7 En
English
Skipping folders (remote control only)
Display information (remote control only)
LISTENING TO CD AND USB DEVICES
The unit will operate as follows when playing back tracks/files on CD/USB devices.
If the CD/USB device being played is stopped, the track that you listened will start playback from the beginning of the
track the next time you play.
If you press while playback is stopped, tracks will play as follows the next time playback begins:
Audio CD: Play from the first track of the CD.
Data CD*/USB device:
Play from the first track of the folder contains the track you listened to last time.
This unit automatically turns off if no operation has been performed for 20 minutes after CD/USB device playback is
stopped.
* “Data CD” is a CD that contains MP3/WMA files.
For details on playable discs and files, refer to “NOTES ON DISCS AND USB DEVICES” (+ P. 25).
Listening to a CD
1 Press the CD source button to switch the
audio source to CD.
If a CD is already inserted, playback will start.
2 Insert a CD into the disc slot.
Playback starts automatically.
Playback can be controlled with either the remote
control, or the front panel on this unit (+ P. 2, 4).
Insert the CD with the label side facing upward.
Folders and files on a data CD are played in alphabetical order.
While a data CD is playing, you can use the remote control’s
FOLDER / buttons to select the folder.
The folder number (only for a data CD) or the song/file
number is shown for several seconds when starting playback
or skipping tracks.
If you press
DISPLAY
on the remote control while a song is
playing or paused, the information shown on the front panel
display will be switched in the following order.
- Elapsed song playback time
- Remaining song playback time (only for an audio CD)
- Song name*
- Album name*
- Artist name*
- File name (only for a data CD)
- Folder name (only for a data CD)
* Shown only if this data is included in the song.
AUX
USB
CD
RADIO
1
2
LISTENING TO CD AND USB DEVICES
8 En
For details on the supported USB device, refer to “NOTES ON DISCS AND USB DEVICES” (+ P. 25).
Skipping folders (remote control only)
Display information (remote control only)
Listening to a USB device
1 Press the USB source button to switch the
audio source to USB.
If a USB device is already connected, playback will start.
2 Connect a USB device to the USB port.
Playback starts automatically.
Playback can be controlled using either the remote control
or the front panel on this unit (
+
P. 2, 4).
Folders and files will play in the order in which they were written.
A USB device is automatically charged when it is connected to
the USB port (5 V/1.0 A output).
Stop playback before disconnecting the USB device.
The iPod cannot be played back.
Charging may not be possible depending on the USB device.
While a USB device is playing, you can use the remote
control’s FOLDER / buttons to select the folder.
The folder/file number is shown for several seconds when
starting playback or skipping tracks.
If you press
DISPLAY
on the remote control while a song is
playing or paused, the information shown on the front panel
display will be switched in the following order
.
- Elapsed song playback time
- Song name*
-Album name*
- Artist name*
-File name
- Folder name
* Shown only if this data is included in the song.
AUX
USB
CD
RADIO
1 2
9 En
LISTENING TO CD AND USB DEVICES
English
The playback status is shown by the repeat/shuffle indicator in the front panel display (+ P. 3).
Repeat playback Shuffle playback
Using repeat/shuffle playback (remote control only)
Press (repeat) repeatedly to
select one of the following
playback modes.
No display: Repeat mode off
: 1 track
: All tracks within the folder (data CD/USB device
only)
: All tracks
Press (shuffle) repeatedly to
select one of the following
playback modes.
No display: Shuffle mode off
: All tracks within the folder (data CD/USB device
only)
: All tracks
LISTENING TO EXTERNAL SOURCES
1 Using a commercially available 3.5 mm mini-
plug cable, connect your external device to the
AUX jack on the rear panel of this unit.
Turn the unit off before connecting the audio cable.
Turn down the volume of the unit and your external audio
device before connection.
2 Press to turn the unit on.
3 Press the AUX source button to switch the
audio source to AUX.
4 Start playback on the connected external
audio device.
ON
CLOCK AUX
SET OFF
AUX
USB
CD
RADIO
1
2
Rear panel
3
10 En
This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth component (mobile
phone, digital audio player, etc.). Please also refer to the owners manual of your Bluetooth component.
You’ll need to perform the pairing operation the first time you use your Bluetooth component with this unit, or if the pairing
settings have been deleted. Pairing is an operation that registers the communicating component (subsequently called “the
other component”) with this unit. Once pairing has been completed, subsequent reconnection will be easy even after the
Bluetooth connection is disconnected (+ P. 11). If pairing is not successful, refer to the item Bluetooth” in
“TROUBLESHOOTING” (+ P. 23).
Yamaha does not guarantee all connections between this unit and Bluetooth component.
This unit can be paired with up to 8 other components. When pairing with the ninth component has succeeded, pairing data for the
component with the oldest connection date will be deleted.
If this unit is connected via Bluetooth to another component, hold down source button on this unit or on the remote control
to disconnect the Bluetooth connection before you perform the pairing operation.
LISTENING TO MUSIC FROM YOUR
Bluetooth
COMPONENT
Playing back from your Bluetooth component
1 Press the source button to switch the
audio source to Bluetooth.
2 Perform Bluetooth pairing on the other
component.
For details refer to the owner’s manual of the other
component.
3 From the Bluetooth connection list of the other
component, choose this unit (TSX-B235
Yamaha or TSX-B235D Yamaha).
When pairing has been completed, the front panel display
of this unit will indicate “BT Pairing OK”.
If you are asked to enter a password, enter the numerals “0000”.
4 Connect this unit and your other component
via Bluetooth.
5 Play back music from your Bluetooth
component.
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
If you connect via Bluetooth from your other component and
playback music while this unit is in standby (except ECO
standby), this unit will automatically turn on.
If you disconnect the Bl uetooth connection from your other
component while the audio source is set to Bluetooth, this unit
will automatically turn off.
•If Bluetooth is selected as the audio source, this unit will
automatically turn off when 20 minutes have elapsed without any
Bluetooth connection nor any operation performed.
AUX
USB
CD
RADIO
1
15:30
BT
Pairing OK
3
11 En
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
English
Easy pairing
For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing operation just by
holding the smartphone over the NFC mark (you need to turn the unit on and turn on the NFC function of the smartphone
beforehand).
Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
Connecting from the other component
1 Hold the smartphone over the NFC mark.
2 Perform the pairing operation at the
smartphone (for details, please read the
owner’s manual of the smartphone).
This unit is indicated as “TSX-B235 Yamaha” or “TSX-
B235D Yamaha” on the smartphone.
If you are prompted for a passkey, enter the numerals “0000”.
If the connection fails, move the smartphone slowly on the
NFC mark.
If the smartphone is equipped with a case, remove the case.
Connecting an already-paired component via Bluetooth
Press the source button to switch the
audio source to Bluetooth.
The Bluetooth indicator will blink in the front panel display;
this unit will search for the other component that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of
the other component).
When the Bluetooth connection has been established, the
Bluetooth indicator will light, and the name of the other
component will be displayed.
1 In the Bluetooth settings of the other component, turn Bluetooth on.
2
From the
Bluetooth
connection list of the other component, choose this unit (TSX-B235 Yamaha or
TSX-B235D Yamaha).
The Bluetooth connection will be established, and the front panel display of this unit will indicate the name of the other
component.
Blue tooth connections cannot be established from the other component when this unit is in ECO standby (+ P. 5).
When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a Bluetooth connection.
NFC mark
AUX
USB
CD
RADIO
15:30
15:30
BT
_____
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
12 En
If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
Hold down source button on this unit or on the remote control.
Turn the unit off.
Turn off the Bluetooth setting of the other component.
• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.
DAB (Digital Audio Broadcasting) and DAB
+
use digital signals for clearer sound and more stable reception compared to
analog signals.
DAB
+
is based on the original DAB standard but uses a more efficient audio codec.
DAB and DAB
+
are broadcast in blocks of data called “ensembles” containing up to several radio stations that are
simultaneously broadcast.
DAB and DAB
+
can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the front panel display.
“DAB” described in this manual may also refer to “DAB
+
”.
Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial
scan is performed automatically.
To listen to a DAB station, connect the antenna (+ P. 3).
Performing the initial scan again (remote control only)
Disconnecting a Bluetooth connection
LISTENING TO DAB STATIONS (TSX-B235D only)
Preparing for DAB reception
Press the RADIO source button to switch the
audio source to DAB.
The initial scan starts. During the scan, the degree of
progress is displayed on the front panel display.
When scan is completed, the number of receivable DAB
stations appear on the front panel display.
If the initial scan is performed, stored DAB station information
and preset DAB stations are cleared.
1 Press and hold down MEMORY on the
remote control.
“DAB INIT SCAN” will appear and
“Press MEMORY” will blink.
2 Press MEMORY.
The initial scan starts.
AUX
USB
CD
RADIO
1 2
13 En
LISTENING TO DAB STATIONS (TSX-B235D only)
English
Display information (remote control only)
DAB frequency information
This unit can receive Band III only.
Selecting DAB stations
1 Press the RADIO source button to switch
the audio source to DAB.
2 Press TUNING / to select the DAB
station.
While receiving DAB, DAB station information is
shown on the front panel display.
If the unit does not receive a DAB signal, “Off Air” is
displayed instead of the DAB station name.
1 Secondary indicator:
Some stations have sub (secondary) stations.
If a secondary station is playing, the secondary
indicator is displayed.
2 Signal strength indicator:
Shows current signal strength.
3 Preset number
4 DAB station name
If you press DISPLAY on the remote control, the
information shown on the front panel display will be
switched in the following order.
- STATION LABEL, PRESET NUMBER
- DLS (Dynamic Label Segment)
- ENSEMBLE LABEL
- CHANNEL/FREQ (Channel label and frequency)
- SIGNAL QUALITY
- AUDIO FORMAT (Audio format, DRC)
Frequency Channel label Frequency Channel label Frequency Channel label
174.928 5A 197.648 8B 220.352 11C
176.640 5B 199.360 8C 222.064 11D
178.352 5C 201.072 8D 223.936 12A
180.064 5D 202.928 9A 225.648 12B
181.936 6A 204.640 9B 227.360 12C
183.648 6B 206.352 9C 229.072 12D
185.360 6C 208.064 9D 230.784 13A
187.072 6D 209.936 10A 232.496 13B
188.928 7A 211.648 10B 234.208 13C
190.640 7B 213.360 10C 235.776 13D
192.352 7C 215.072 10D 237.488 13E
194.064 7D 216.928 11A 239.200 13F
195.936 8A 218.640 11B
AUX
USB
CD
RADIO
1
2
10:30
DAB01STATION1
1 2
43
LISTENING TO DAB STATIONS (TSX-B235D only)
14 En
Use the preset function to store your favorite 30 stations.
Deleting a stored preset
Presetting DAB stations (remote control only)
1 Press the RADIO source button to switch
the audio source to DAB.
2 Press TUNING / to select a station that
you want to preset.
3 Press MEMORY.
The display will indicate “PRESET MEMORY,” and
the preset number will blink.
4 Press PRESET / to select the preset
number that you want to store.
The lowest preset number that has not been stored will be
selected first.
If you want to cancel the presetting, press .
If you select a preset number in which a station has already
been stored, it will be overwritten by the new station.
5 Press MEMORY.
This stores the DAB station.
When presetting has finished, the display will indicate
“Completed!”.
1 Press the RADIO source button to switch
the audio source to DAB.
2 Press MEMORY on the remote control.
The display will indicate “PRESET MEMORY,” and
the preset number will blink.
3 Press TUNING
/
to select the preset
delete operation.
The display will indicate “PRESET DELETE”.
4 Press PRESET / to select the preset
number that you want to delete.
If you want to cancel the deleting, press .
5 Press MEMORY to complete the operation.
The preset will be deleted, and the display will
indicate “Deleted!”.
Selecting preset DAB stations
1 Press the RADIO source button to switch
the audio source to DAB.
2 Press PRESET / to select the DAB
station that you want to hear.
You can only select presets that have been stored.
4
2
53
1
4
3
52
1
AUX
USB
CD
RADIO
1
2
15 En
English
To listen to the FM station, connect the antenna (+ P. 3).
Display information (remote control only)
If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.
LISTENING TO FM STATIONS
Selecting an FM station
1 Press the RADIO source button to switch the
audio source to FM.
2 Tune FM stations
Automatic tuning: Press and hold TUNING /.
Manual tuning: Press TUNING / repeatedly.
If you tune to a station manually while receiving FM, the sound
will be monaural.
Preset number and frequency
Reception status*
* Example of reception status indication.
TUNED/STEREO: A strong FM stereo broadcast is
being received.
TUNED/MONO: A monaural FM broadcast is being
received (even if the FM broadcast is
stereo, reception will be monaural if
the signal is weak).
Not TUNED: No broadcast is being received.
Displaying Radio Data System information
If you press DISPLAY on the remote control while Radio
Data System information is being received, the information
shown on the front panel display will be switched in the
following order.
- PS (Program Service)
- PTY (Program Type)
- RT (Radio Text)
- CT (Clock Time)
- Reception status
- Preset number and frequency
If the signal transmission of the Radio Data System station is too
weak, this unit may not be able to receive Radio Data System
information completely. In particular, RT (Radio Text) information
uses a lot of bandwidth, so it may be less available compared to
other types of information.
AUX
USB
CD
RADIO
1
2
LISTENING TO FM STATIONS
16 En
Use the preset function to store your favorite 30 stations.
First, press the RADIO source button to switch the audio source to FM.
Auto preset
This method tunes automatically, and automatically presets only the stations that have good reception.
Manual preset
Deleting a stored preset
Presetting FM stations (remote control only)
1 Press and hold down MEMORY.
“AUTO PRESET” will appear and “Press MEMORY”
will blink.
2 Press MEMORY.
Auto preset will begin.
When presetting has finished, the display will indicate
“Completed!”.
When you perform auto preset, all stored stations are cleared
and the new stations are stored.
If you want to stop auto preset before it is completed, press .
1 Press TUNING / to tune a station that
you want to preset.
2 Press MEMORY.
The display will indicate “PRESET MEMORY,” and the
preset number will blink.
3 Press PRESET / to select the preset
number that you want to store.
The lowest preset number that has not been stored will be
selected first.
If you want to cancel the presetting, press .
If you select a preset number in which a station has already
been stored, it will be overwritten by the new station.
4 Press MEMORY.
When presetting has finished, the display will indicate
“Completed!”.
1 Press MEMORY on the remote control.
The display will indicate “PRESET MEMORY”, and the
preset number will blink.
2 Press TUNING
/
to select the preset
delete operation.
The display will indicate “PRESET DELETE”.
3 Press PRESET / to select the preset
number that you want to delete.
If you want to cancel the deleting, press .
4 Press MEMORY to complete the operation.
The preset will be deleted, and the display will indicate
“Deleted!”.
AUTO PRESET
Press MEMORY
1 2
PRESETMEMORY
FM0187.50MHz
3
1
42
3
2
41
17 En
LISTENING TO FM STATIONS
English
Selecting preset FM stations
1 Press the RADIO source button to switch the
audio source to FM.
2 Press PRESET / to select the FM station
that you want to hear.
You can only select presets that have been stored.
AUX
USB
CD
RADIO
1
2
18 En
The unit includes an alarm function that plays back audio sources or a set of beep (internal alarm sound) at the set time using
a variety of different methods. The alarm function has the following features.
3 types of alarms
Select from 3 alarm types, combining music and beep sounds.
Various audio sources
You can choose from audio CD, data CD, USB device, or DAB
*
/FM. The following playback methods can also be selected
depending on the audio source:
* TSX-B235D only
You can not choose Bluetooth and AUX as the audio source.
Snooze
The snooze function can be enabled to replay the alarm after 5 minutes (+ P. 20).
USING THE ALARM FUNCTION (IntelliAlarm)
SOURCE+BEEP
The selected audio source and the beep sound are played at the set time.
Source playback begins to fade in 3
minutes before the set time and the volume gradually increases to the set volume. Then, at the set time, the
beep sound is activated.
SOURCE
The selected audio source is played at the set time. The volume fades in gradually and increases to the set
volume.
BEEP The beep sound is played at the set time.
Source
Playback
method
Function
Audio CD
Selected track The selected track is played repeatedly.
Resume The track you listened to last time is played back.
Data CD/USB device
Folder The selected folder is played repeatedly.
Resume The track you listened to last time is played back.
DAB
*
/FM
Preset station The selected preset station is played.
Resume
The DAB
*
/FM station you listened to last time is played back.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227

Yamaha TSX-B235 Black Manuale utente

Categoria
Lettore CD
Tipo
Manuale utente