2010/07/02
EG GN GS
RQTX1185-B
Operating Instructions
Home Theater Audio System
Model No. SC-HTB500
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
The illustrations shown may differ from your unit.
Included Installation Instructions
The installation should never be done by any other than a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating instructions
to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
SCHTB500EGGNGS_RQTX1185-B.book Page 1 Wednesday, July 7, 2010 5:18 PM
2
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥ USE ONLY THE RECOMMENDED ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND
ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS,
TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.
≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.
Warning
Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 60
o
C or incinerate.
The socket outlet shall be installed near the equipment and easily accessible.
The mains plug of the power supply cord shall remain readily operable.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptacle.
(Continental Europe, Australia and New Zealand)
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
(Others)
THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.
This product may receive radio interference caused by mobile telephones during use. If such
interference is apparent, please increase separation between the product and the mobile telephone.
Product Identification Marking is located on the bottom of the active subwoofer.
(For Asia and Africa)
CAUTION:
The AC voltage is different according to the area.
Be sure to set the proper voltage in your area before use.
(For details, please refer to page 13.)
SCHTB500EGGNGS_RQTX1185-B.book Page 2 Wednesday, July 7, 2010 5:18 PM
3
Operating Instructions
Safety precautions
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and
excessive vibration. These conditions can damage
the cabinet and other components, thereby
shortening the unit’s service life.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can
overload the unit and cause a fire.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other
places where DC is used.
Ensure the AC mains lead is connected correctly
and not damaged. Poor connection and lead
damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead.
Pulling the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.
Do not let metal objects fall inside the unit. This can
cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs,
immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if
sprayed into the unit.
Do not attempt to repair this unit by yourself. If
sound is interrupted, indicators fail to light, smoke
appears, or any other problem that is not covered in
these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorised
service center. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from
the power source if it is not to be used for a long
time.
Licenses
Placement
Voltage
AC mains lead protection
Foreign matter
Service
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending.
DTS and the Symbol are registered trademarks
& DTS Digital Surround and the DTS logos are
trademarks of DTS, Inc. Product includes
software.
C DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in
the United States and other countries.
HDAVI Control™ is a trademark of Panasonic
Corporation.
SCHTB500EGGNGS_RQTX1185-B.book Page 3 Wednesday, July 7, 2010 5:18 PM
4
TABLE OF CONTENTS
Safety precautions ................................................................................................ 3
Licenses ................................................................................................................. 3
Accessories ........................................................................................................... 5
Unit care ................................................................................................................. 5
Control reference guide ........................................................................................ 6
This unit and active subwoofer (Front) .......................................................................................6
This unit and active subwoofer (Rear) .......................................................................................6
Remote control ...........................................................................................................................7
Placement .............................................................................................................. 8
This unit .....................................................................................................................................8
The Active subwoofer ................................................................................................................9
Assembling the unit ............................................................................................ 10
Connections ........................................................................................................ 11
Connection to a TV ..................................................................................................................11
Connection from an HDMI compatible device ..........................................................................12
Digital transmitter connection ...................................................................................................12
AC mains lead connection .......................................................................................................13
Active subwoofer wireless connection .....................................................................................13
Using this unit ..................................................................................................... 14
Audio effects ....................................................................................................... 15
The various audio effects .........................................................................................................15
Changing the audio effects ......................................................................................................15
Linked operations with the TV
(VIERA Link “HDAVI Control
TM
”) ...................................................................... 16
Specifications ...................................................................................................... 17
Audio information ............................................................................................... 18
Troubleshooting .................................................................................................. 18
Remote control code ................................................................................................................20
Using the IR Blaster .................................................................................................................21
Caution for AC Mains Lead ................................................................................ 22
Safety Precautions .............................................................................................. 23
Components ........................................................................................................ 25
Installation procedure ......................................................................................... 25
Attaching the wall mount brackets ...........................................................................................25
Connections .............................................................................................................................26
Placement ................................................................................................................................26
Attaching this unit to a wall ......................................................................................................27
Operating Instructions
Installation Instructions
SCHTB500EGGNGS_RQTX1185-B.book Page 4 Wednesday, July 7, 2010 5:18 PM
5
Operating Instructions
≥ Some accessories and external devices mentioned in these operating instructions that are not
supplied with this product may not be for sale in certain regions.
Accessories
Check the supplied accessories before using this unit.
≥ Product numbers correct as of May 2010. These may be subject to change.
Unit care
∫ Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫ To dispose or transfer this unit
If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to
the factory presets to delete the user settings. (> 18, “To return to the factory preset.”)
≥ These operation instructions are applicable
to model SC-HTB500 for variety of regions.
≥ Unless otherwise indicated, illustrations in
these operating instructions are of the model
for Continental Europe, Australia and New
Zealand.
≥ Operations in these instructions are
described mainly with the remote control,
but you can perform the operations on this
unit if the controls are the same.
System SC-HTB500
This unit SU-HTB500
Active subwoofer SB-WA500
∏ 1 Remote control
(Built-in battery)
(N2QAYC000027)
∏ 2 Wall mount brackets ∏ 2 Screws
∏ AC mains leads
(Australia and New Zealand)
(Saudi Arabia and Kuwait) (Others)
∏ 2 Lock pins ∏ 1 IR Blaster ∏ 1 Digital transmitter
SCHTB500EGGNGS_RQTX1185-B.book Page 5 Wednesday, July 7, 2010 5:18 PM
6
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the Volume of this unit
3 Select the source
“TV” !# “BD/DVD”
4 LED status indicators (> 14, 15)
A Audio source indicator
B Clear-mode Dialog indicator
C Sound Effect indicator
D Dolby Virtual Speaker indicator
E Audio format indicator
5 Remote control signal sensor
Remote control operation range
Distance:
Within approx. 7 m
Angle:
Approx. 10
o
up and 30
o
down, 30
o
left and
right
6 Active subwoofer on/off button
7 WIRELESS LINK indicator
1 Digital transmitter dock (> 12)
2 AC Voltage selector (> 13)
3 AC IN terminal (> 13)
4 Ir SYSTEM terminal
(Only for use with the supplied IR Blaster.
(> 21))
5 HDMI AV OUT terminal (> 11)
6 OPTICAL DIGITAL AUDIO IN terminal (> 11)
7 HDMI AV IN terminal (> 12)
This unit and active subwoofer (Front)
6 7
123 54
This unit and active subwoofer (Rear)
DIGITAL TRANSMITTER
4
5
6
7
3
AC IN
1
DIGITAL
TRANSMITTER
3
AC IN
2
110
−
127V
220
−
240V
VOLT ADJ
(For Asia
and Africa)
SCHTB500EGGNGS_RQTX1185-B.book Page 6 Wednesday, July 7, 2010 5:18 PM
7
Operating Instructions
1 Turn this unit on or off (> 14)
2 Select the source (> 14)
[TV]:
Select the TV as the source
[BD/DVD]:
Select the device connected to the HDMI AV
IN terminal as the source
3 Turn Clear-mode Dialog on or off (> 15)
4 Adjust the Subwoofer level of the active
subwoofer
5 Adjust the Volume of this unit
6 Mute the sound
7 Turn Dolby Virtual Speaker on or off (> 15)
8 Turn Sound Effect on or off (> 15)
Remote control
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
1
2
3
4
5
6
7
8
Remove the insulation sheet A before using.
∫ To replace a button-type battery
1 While pressing the stopper B, pull out the
battery holder.
2 Set the button-type battery with its (i) mark
facing upward and then put the battery holder
back in place.
≥ When the button-type battery runs down,
replace it with a new battery (part number:
CR2025). The battery should normally last
about 1 year, however this depends on how
frequently the unit is used.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of
time with doors and windows closed.
Warning
Keep the Button-Type battery out of the reach of
children. Never put Button-Type battery in
mouth. If swallowed call your doctor.
SCHTB500EGGNGS_RQTX1185-B.book Page 7 Wednesday, July 7, 2010 5:18 PM
8
Placement
How you place this unit and the active subwoofer can affect the bass and the sound field.
Place this unit near the TV.
This unit should be placed parallel to the seating position.
E.g.,
§1 Place this unit on a flat secure base. (Do not place this unit on the TV’s pedestal.)
§2 To allow for proper ventilation and to allow for proper air flow around this unit, position it with at least 5 mm of space on all sides
of this unit.
§3 Secure the unit to prevent it from falling. (> 10)
§4 Do not place this unit in front of a 3D compatible TV. This unit may block the transmitter for the 3D eyewear.
§5 Do not place this unit too close to the TV. This unit may interfere with the TV’s various sensors (ambient light, etc.).
≥ You can damage the speakers and shorten their useful life if you play sound at high levels over extended periods.
≥ Placing this unit too close to the floor, walls, and corners can result in excessive bass. Cover walls and windows with thick
curtains.
≥ Do not use the active subwoofer or this unit in a metal cabinet or bookshelf.
Caution
≥ This unit, the supplied wall mount brackets and the active subwoofer are to be used only as
indicated in these operating instructions or the installation instructions. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a
qualified service person if damage has occurred or if you experience a sudden change in
performance.
≥ Do not attempt to attach this unit to a wall using methods other than those described in this
manual.
This unit
On the wall
In a rack
§
1, 2, 3
On a table
§
1, 2, 3, 4, 5
To attach this unit to the wall, refer to the installation instructions. (> 23)
Installation work should never be done by any other than a qualified installation specialist.
SCHTB500EGGNGS_RQTX1185-B.book Page 8 Wednesday, July 7, 2010 5:18 PM
9
Operating Instructions
∫ If the TV’s remote control sensor is
blocked by this unit.
Try using the TV’s remote control from a different
angle. If the problem persists, you can use the
supplied IR Blaster to relay the signal to the TV.
(> 21)
≥ Do not use the IR Blaster if the TV’s remote
control sensor is not blocked by this unit.
∫ If irregular colouring occurs on your
TV, turn the TV off for about
30 minutes.
If it persists, move this unit further away from the
TV.
Place to the right or left of the TV, on the floor or
on a sturdy shelf so that it will not cause
vibration. Leave about 30 cm from the TV.
≥ Place the active subwoofer within approximately 10 m of this
unit, and in a horizontal position with the top panel faced
upward.
≥ To allow for proper ventilation and to maintain good airflow
around the active subwoofer, position it with at least 5 cm of
space on all sides.
≥ Do not use the active subwoofer or this unit in a metal
cabinet or bookshelf.
The Active subwoofer
To avoid interference, maintain the following
distances between the active subwoofer and
other electronic devices that use the same
radio frequency (2.4 GHz band).
A Active subwoofer
B Wireless LAN: approx. 2 m
C Cordless phone and other electronic devices:
approx. 2 m
The active subwoofer will automatically seek a
clear channel if any of these other devices
interfere with its communication.
When this happens there is a brief interruption to
the audio coming from the subwoofer.
This is the normal operation of the product
working to assure the best possible performance
of your home theater audio system.
If the interference persists, try moving the other
devices to another location outside the range of
the active subwoofer or move the active
subwoofer nearer to this unit.
A
B
C
SCHTB500EGGNGS_RQTX1185-B.book Page 9 Wednesday, July 7, 2010 5:18 PM
10
Assembling the unit
Refer to the following when placing this unit on a table or in a rack. For wall mount, refer to the
installation instructions. (> 23)
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥Keep the screws out of reach of children to prevent swallowing.
≥ Do not hold this unit in one hand to avoid injury by dropping this unit when carrying.
1 On the rear of the unit:
Place the wall mount bracket by aligning the holes in the wall mount bracket
with the projecting parts A.
2 Screw the wall mount bracket firmly into place.
≥ Screw tightening torque: 80 N0cm to 120 N0cm.
≥ Repeat the steps above when installing the second wall mount bracket.
3 Thread a cord (not supplied) through each wall mount bracket.
≥ Make sure to use a cord which is capable of
supporting over 20 kg.
A Rear of this unit
B Fall prevention
cord (not supplied)
4 After all the necessary connections are finished. (> 11)
Place the unit in the desired position and attach each cord onto the rack or
table.
≥ Attach each cord to a different screw eye.
≥ Make sure that there is no more than a 3 cm slack.
A This unit
B Fall prevention cord (not supplied)
C Rack or table
D Screw eye (not supplied)
≥ Attach at a position capable of supporting over
20 kg.
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
To prevent the unit from falling
E.g.,
SCHTB500EGGNGS_RQTX1185-B.book Page 10 Wednesday, July 7, 2010 5:18 PM
11
Operating Instructions
Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Compatible with FULL HD 3D TV and Blu-ray Player
≥ This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV.
ARC (Audio Return Channel)
(Available only when using an ARC compatible
TV)
With this function it is possible to receive the digital
audio signal from the TV without connecting any
other audio cable.
≥ Refer to the operating instructions of the TV for
the settings to output digital audio.
A HDMI cable (not supplied)
§ Be sure to connect to the TV’s ARC compatible terminal.
(Refer to the operating instructions for the TV.)
≥ If the connected TV is ARC compatible, but audio is not
output to this unit, connect using the optical digital audio
cable. (> right, “Basic connection (with an optical digital
audio cable compatible TV)”)
A HDMI cable (not supplied)
B Optical digital audio cable
(not supplied)
≥ When connected to an ARC compatible TV, set “TV Audio” to
“ARC Off” to output the audio signal from the optical digital
audio cable. (> 20, “TV Audio”)
Connection to a TV
∫ HDMI
The HDMI connection supports VIERA Link
“HDAVI Control” (> 16) when used with a
compatible Panasonic TV.
≥ Use High Speed HDMI Cables that have the HDMI logo (as
shown on the cover). It is recommended that you use
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50
(5.0 m), etc.
≥ Non-HDMI-compliant cables cannot be utilised.
∫ OPTICAL IN
Connect the optical digital audio cable if the TV is
not ARC compatible (> below).
Basic connection (with an
ARC compatible TV)
AV I N
(ARC)
HDMI AV OUT (ARC)
TV
Basic connection
(with an optical digital
audio cable compatible
TV)
OPTICAL
OUT
AV IN
OPTICAL DIGITAL
AUDIO IN
HDMI AV OUT
TV
SCHTB500EGGNGS_RQTX1185-B.book Page 11 Wednesday, July 7, 2010 5:18 PM
12
You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with
this unit and pass the signal through to your TV.
Preparation
≥Connect this unit to the TV. (> 11)
≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and
audio signals.
A Digital transmitter (supplied)
Insert fully until you hear a click.
Connection from an HDMI compatible device
AV O U T
HDMI AV IN
A HDMI cable (not supplied)
E.g., Blu-ray Disc Player
Digital transmitter connection
Do not insert or remove while this unit is on.
DIGITAL TRANSMITTER
DIGITAL TRANSMITTER
SCHTB500EGGNGS_RQTX1185-B.book Page 12 Wednesday, July 7, 2010 5:18 PM
13
Operating Instructions
≥Connect only after all other connections are complete.
≥This system consumes a small amount of AC power, even when it is turned off (this unit; approx. 0.2 W,
the active subwoofer; approx. 0.4 W). In the interest of power conservation, if you will not be using this
system for a long time, unplug it from the household mains socket.
≥The supplied AC mains lead is for use with this unit and the active subwoofer only.
Do not use it with other equipment. Also, do not use cords for other equipment with this unit or the active
subwoofer.
Turn on the active subwoofer after all connections are complete.
Press [C I, B Í] on the active subwoofer.
A Unit on/off button [C I, B Í]
Use this button to turn the unit on and off.
C I:
The active subwoofer is on
B Í:
The active subwoofer is off
B WIRELESS LINK indicator
≥ Red:
The active subwoofer is on and the wireless link
is deactivated
≥ Green:
The active subwoofer is on and the wireless link
is activated
AC mains lead connection
(For Saudi Arabia and Kuwait)
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 22 BEFORE CONNECTION.
AC IN
AC IN
110
−
127V
220
−
240V
VOLT ADJ
A AC mains lead (supplied)
≥ Do not use any other AC mains lead except the supplied one.
B To a household mains socket
Rear of this unit
Rear of the active subwoofer
(For Asia and Africa)
Before connecting the AC mains lead
Set the voltage.
Use a flat-head screwdriver to move the voltage selector to the
appropriate position for the area in which this system is used.
Active subwoofer wireless connection
SCHTB500EGGNGS_RQTX1185-B.book Page 13 Wednesday, July 7, 2010 5:18 PM
14
Using this unit
Preparation
≥ Turn on the TV.
≥ If VIERA Link is activated on both the connected
TV and this unit, make sure to change the TV’s
settings for this unit. (> 16, “Linked operations
with the TV (VIERA Link “HDAVI Control
TM
”)”)
≥ If VIERA Link is not activated or if the TV is not
compatible with VIERA Link, reduce the volume
of the TV to its minimum.
1 Press [Í] to turn on this unit.
≥ The current status (audio source, active
audio effects and audio format) is displayed.
The audio effects and audio format indicator
will turn off after 4 sec.
2 Press [C I, B Í] on the active
subwoofer to turn it on.
≥ Make sure the wireless link indicator lights
green. (> 13)
3 Press [TV] or [BD/DVD] to select
the audio source. (> right)
≥ If you have selected [BD/DVD], make sure to
select the TV’s input channel for this unit and
start the playback.
≥ Before turning off this unit, be sure to reduce the volume.
≥ Even if this unit is turned off, the device connected to the
HDMI AV IN terminal will continue to output audio or video to
the TV.
A The selected audio source is indicated
Green:
When the TV is the audio source
Red:
When the device connected to the HDMI AV IN
terminal is the audio source
Press [i VOL j] to adjust the volume
of the speakers.
Press [i SUBWOOFER j] to adjust
the subwoofer level.
B The indicators blink from left to right (i) or from
right to left (s).
≥ The indicators will not blink when it has reached
the maximum or minimum.
Press [MUTE].
B The indicators blink simultaneously while
muting.
≥ To cancel, press the button again or adjust the
volume.
≥ Muting is cancelled if this unit is turned off.
Press [ VS] to indicate the audio
format.
C The current audio format is indicated for 4 sec.
Green: Dolby Digital
Red: DTS
Off: PCM or LPCM
≥ The audio format status is also indicated for 4 sec if the audio
format on the selected source (TV, Blu-ray Disc/DVD Player,
etc.) is changed.
≥ The Dolby Virtual Speaker ( VS) audio effect status is also
indicated. (> 15)
1
2
Audio source indicator
To adjust the volume/
subwoofer level
To mute the sound
Audio format indicator
A CB
SCHTB500EGGNGS_RQTX1185-B.book Page 14 Wednesday, July 7, 2010 5:18 PM
15
Operating Instructions
Audio effects
You can make the dialogue stand out from the
background noise and also hear sound as if it is
coming from the centre of the TV.
You can enjoy a dynamic sound with a natural
expansion.
You can enjoy a surround sound effect similar to
5.1 ch (Dolby Digital or DTS) with any audio
source.
1 Press the button for the respective
effect on the remote control.
A: Clear-mode Dialog
B: Sound Effect
C: Dolby Virtual Speaker ( VS)
2 The status of the selected effect is
indicated for 4 sec.
A: Clear-mode Dialog
B: Sound Effect
C: Dolby Virtual Speaker ( VS)
On:
The indicator lights
Off:
The indicator blinks
3 While the indicator is lit or blinking,
press the same button again to
change the setting.
≥ When turning the audio effects on or off, there might be a
slight pause in the audio. This is normal.
≥ Dolby Virtual Speaker ( VS) is also turned on when Sound
Effect is turned on. (It will remain on even after Sound Effect
is turned off.)
≥ If Dolby Virtual Speaker ( VS) is turned off while Sound
Effect is on, the Sound Effect will also be turned off.
≥ The audio format is also indicated when [ VS] is pressed.
(> 14)
A B CA B C
The various audio
effects
Clear-mode Dialog
Sound Effect
Dolby Virtual Speaker
Changing the audio
effects
SCHTB500EGGNGS_RQTX1185-B.book Page 15 Wednesday, July 7, 2010 5:18 PM
16
Linked operations with the TV
(VIERA Link “HDAVI Control
TM
”)
Preparation
1 Set “VIERA Link” to “On”.
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV).
3 For the optimal “HDAVI Control” operations
change the following settings on the connected
TV
§
1
.
≥ Set the default speaker settings to this unit.
§
2
≥ Set the speaker selection settings to this unit.
≥ Set the digital audio output settings to be
compatible with this unit. (> 18)
4 Turn on all “HDAVI Control” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDAVI
Control” function works properly.
5 Start playback on the device connected to the
HDMI AV IN terminal and check that the image
is displayed correctly.
When the connection or settings are changed,
repeat this procedure.
§1 The availability and function of the settings may vary
depending on the TV. Refer to the operating instructions for
the TV for details.
§2 If the TV has a default speaker setting within the VIERA
Link setting items, choosing this unit as the default speaker
will automatically change the speaker selection to this unit.
≥ VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique
function that we have developed and added. As such, its
operation with other manufacturers’ equipment that supports
HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of
December, 2009) for Panasonic’s HDAVI Control compatible
equipment. This standard is compatible with Panasonic’s
conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
You can select whether audio output is from this
unit or the TV speakers by using the TV menu
settings.
Home Cinema
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the
TV speakers to this unit in the TV menu will
automatically turn this unit on and select “TV” as
the source.
≥ You can control the volume setting using the
Volume or Mute button on the TV remote control.
≥ If you turn off this unit, TV speakers will be
automatically activated.
TV
TV speakers are active.
≥ The volume of this unit is set to its minimum.
≥ When switching between this unit’s speakers and TV
speakers, the TV screen may be blank for several seconds.
When the following operations are performed, this
unit will automatically turn on
§
and change the input
channel to the corresponding source.
jWhen play starts on an HDMI connected device.
jWhen the input channel on the TV is changed.
§ Only when speaker output is set to this unit.
≥ If “Power off link” is activated on the TV, this unit will turn off
when the TV is turned off.
Delay between audio and video is automatically
adjusted, enabling you to enjoy smooth audio for
the picture.
≥ The delay information is automatically set if the TV is
compatible to VIERA Link “HDAVI Control 3 or later” and the
VIERA Link is set to “On”.
When the delay information cannot be retrieved, the audio
delay is set to 40 ms.
What is VIERA Link “HDAVI
Control”?
VIERA Link “HDAVI Control” is a convenient
function that offers linked operations of this
unit, and a Panasonic TV (VIERA) under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the
operating instructions for connected
equipment for operational details.
Speaker Selection
Automatic input switching
Automatic lip-sync
function
(for HDAVI Control 3 or later)
SCHTB500EGGNGS_RQTX1185-B.book Page 16 Wednesday, July 7, 2010 5:18 PM
17
Operating Instructions
Specifications
Dimensions (WkHkD):
This unit
(Without wall mount bracket)
1029 mmk108 mmk58 mm
(With wall mount bracket)
1029 mmk108 mmk80 mm
Active subwoofer
250 mmk323 mmk356 mm
Digital transmitter
43.5 mmk37.3 mmk8.2 mm
Mass:
This unit
(Without wall mount bracket)
Approx. 2.8 kg
(With wall mount bracket)
Approx. 2.9 kg
Active subwoofer
Approx. 6.7 kg
Digital transmitter
Approx. 0.0095 kg
Operating temperature range:
0
o
C to r40
o
C
Operating humidity range:
20 % to 80 % RH (no condensation)
RMS Output Power
Front ch:
60 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer ch:
120 W per channel (8 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power: 240 W
(Except Continental Europe, Australia and
New Zealand)
PMPO Output Power: 2100 W
FRONT SPEAKERS (BUILT-IN)
Type: 1 way, 1 speaker system (Bass Reflex)
Full range: 6.5 cm Cone typek2
ACTIVE SUBWOOFER
Type: 1 way, 1 speaker system (Kelton type)
Woofer: 16 cm Cone type
Passive radiator: 25 cm
Output sound pressure: 78 dB/W (1 m)
Frequency range: 35 Hz to 180 Hz (j16 dB)
40 Hz to 160 Hz (j10 dB)
HDMI
This unit supports “HDAVI Control 5” function.
HDMI input
Input connector: Type A (19 pin)
HDMI AV output
Output connector: Type A (19 pin)
Digital Audio Input (TV only)
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital
IR Blaster
Terminal 1: 3.5 mm jack
Wireless module
Frequency range: 2.4 GHz to 2.4835 GHz
Number of channels: 3
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum
analyzer.
GENERAL
Power consumption:
This unit:
(Continental Europe, Australia and New
Zealand) 26 W
(Others) 29 W
Active subwoofer: 25 W
Digital transmitter: 1.2 W
Power consumption in standby mode:
This unit: Approx. 0.2 W
Power consumption in off mode:
Active subwoofer: Approx. 0.4 W
Power supply:
(Continental Europe, Australia and New
Zealand)
AC 220 V to 240 V, 50 Hz
(Others)
This unit: AC 110 V to 127 V/220 V to 240 V,
50/60 Hz
Active subwoofer: AC 110 V to 240 V,
50/60 Hz
AMPLIFIER SECTION
SPEAKER SECTION
TERMINAL SECTION
WIRELESS SECTION
SCHTB500EGGNGS_RQTX1185-B.book Page 17 Wednesday, July 7, 2010 5:18 PM
18
Audio information
∫ Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround, 2-channel
LPCM and multi-channel LPCM.
≥ When using the optical digital audio cable, this
system is not able to play audio with a sampling
frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be
automatically cancelled if the audio signal’s
sampling frequency is greater than 48 kHz.)
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the check
points, or if the solutions indicated in the following
guide do not solve the problem, consult your dealer
for instructions.
To return to the factory preset.
≥ While this unit is on, press [Í/I] on this unit for
more than 4 sec.
(All the indicators will blink twice when the unit is
reset.)
The remote control doesn’t work properly.
≥ It is possible that the insulation sheet has not
been removed. Remove the insulation sheet.
(> 7)
≥ The remote control and this unit are using
different codes. Change the code on the remote
control. (> 20)
≥ It may be necessary to set the code of the remote
control again after changing the battery of the
remote control. (> 20)
This unit does not operate correctly.
≥ If the HDMI cable is connected to the wrong
terminal (HDMI AV IN or HDMI AV OUT), this unit
will not operate correctly. Turn this unit off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). (> 11)
When operating the connected device, this unit
reacts in an unwanted manner.
≥ HDAVI Control commands may use a different
signal depending on the make of the device. In
this case, set “VIERA Link” to “Off”. (> 20,
“VIERA Link”)
VIERA Link related operations no longer
function properly.
≥ Check the “VIERA Link” setting on the connected
devices.
≥ When the HDMI connections are changed, after a
power failure or after the AC mains lead has been
removed, VIERA Link operations may not
function properly.
No power.
≥ Insert the AC mains lead securely. (> 13)
≥ After turning this unit on, if the “TV, BD/DVD”
indicator or the “ D/DTS” indicator blinks and
this unit immediately turns off, unplug the AC
mains lead and consult your dealer.
Power of this unit is turned off when the input
for the TV is changed.
≥ This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). For details please
read the operating instructions for the TV.
General operation
Power
SCHTB500EGGNGS_RQTX1185-B.book Page 18 Wednesday, July 7, 2010 5:18 PM
19
Operating Instructions
No sound (or image).
≥ Turn muting off. (> 14)
≥ Check the connections to the other devices.
(> 11)
≥ Check the audio output settings on the connected
device.
≥ Turn this unit off and then on again.
≥ When connected to an ARC compatible TV,
check if the TV’s connected terminal is ARC
compatible.
≥ If the connections are correct, there might be a
problem with the cables. Reconnect the unit with
different cables.
≥ When using the optical digital audio cable, this
system is not able to play audio with a sampling
frequency greater than 48 kHz.
Sound is not heard when playing DVD-Audio.
≥ This may occur due to digital copyright protection
of the disc when using the optical digital audio
cable. This system is not able to play audio with a
sampling frequency greater than 48 kHz.
If the “ D/DTS” indicator is blinking, unplug
the AC mains lead and consult your dealer.
If the “TV, BD/DVD” indicator is blinking, try the
following to correct the problem. Consult your
dealer if the problem persists.
≥ Turn the connected device off and on again.
≥ Turn this unit off and reconnect the HDMI cables
and then turn this unit on again.
If this unit is connected to a non-Panasonic
ARC compatible TV, connect using an optical
digital audio cable. (> 11)
≥ After connecting the optical digital audio cable,
the setting of this unit must be changed to specify
the audio input terminal. (> 20, “TV Audio”)
Audio is output from the TV speakers and not
this unit’s.
≥ When connected to a VIERA Link (HDAVI
Control) compatible TV, change the audio output
settings to this unit. (> 16)
Both main and secondary audio are output
simultaneously.
≥ Change the digital audio output setting on the TV
or connected device and then select the desired
audio channel. (For details, refer to the operating
instructions for the TV or connected device.)
No power.
≥ Ensure the AC mains lead of the active
subwoofer is connected properly.
After turning the subwoofer on, it immediately
turns off.
≥ Unplug the AC mains lead and consult your
dealer.
No sound from the subwoofer.
≥ Check that the active subwoofer is turned on.
≥ Check that the wireless link indicator lights green.
(> 13)
The wireless link indicator lights red.
≥ There is no link between this unit and the active
subwoofer.
jCheck that this unit is turned on.
jEnsure that the digital transmitter is fully
inserted into the digital transmitter dock on this
unit. (> 12)
jTurn the active subwoofer off and then back on.
Alternatively, turn the active subwoofer off,
disconnect the AC mains lead and then
reconnect it.
Consult your dealer if the problem persists.
The audio from the subwoofer is interrupted.
≥ The active subwoofer is automatically seeking a
clear channel. If the interference persists, try
moving the other wireless devices to another
location outside the range of the active
subwoofer or move the active subwoofer nearer
to this unit. (> 9)
Sound
Active subwoofer
SCHTB500EGGNGS_RQTX1185-B.book Page 19 Wednesday, July 7, 2010 5:18 PM
20
Refer to “Troubleshooting” (> 18) before
changing any of the following settings.
The settings remain intact even if you switch the
unit to standby mode.
A will blink green once when the setting is changed.
∫ VIERA Link
Changes to this setting become effective after
turning off and on all the connected devices.
Set “VIERA Link” to “Off”.
Set “VIERA Link” to “Off” when you do not want to
use “HDAVI Control”. (> 18, “General operation”)
Press and hold [INPUT SELECTOR] on this
unit and [BD/DVD] on the remote control for
more than 2 sec.
≥ When set to “Off”, the ARC function is not
available. Be sure to connect using the optical
digital audio cable. (> 11)
Set “VIERA Link” to “On”.
Press and hold [INPUT SELECTOR] on this
unit and [SOUND EFFECT] on the remote
control for more than 2 sec.
∫ TV Audio
Set “TV Audio” to “ARC Off”.
Set “TV Audio” to “ARC Off” only when using an
optical digital audio cable with an ARC compatible
TV. (> 19, “Sound”)
Press and hold [INPUT SELECTOR] on this
unit and [TV] on the remote control for more
than 2 sec.
Set “TV Audio” to “Auto”.
Press and hold [INPUT SELECTOR] on this
unit and [CLEAR-MODE DIALOG] on the
remote control for more than 2 sec.
When other Panasonic products respond to this
unit’s remote control, change the remote control
code on this unit and the remote control.
Preparation
≥ Turn off all other Panasonic products.
≥ Turn on this unit.
Change the remote control to code 2:
1 Aim the remote control at this unit’s remote
control sensor.
2 Press and hold [CLEAR-MODE DIALOG] and
[BD/DVD] on the remote control for more than
4sec.
A will blink green once when the code of this unit is
changed.
≥ If the unit does not operate after changing the code, repeat
steps 1 and 2.
≥ To change the remote control to code 1, repeat the steps
above, but replace [BD/DVD] with [TV].
Changing this unit’s
settings
A
Remote control code
A
SCHTB500EGGNGS_RQTX1185-B.book Page 20 Wednesday, July 7, 2010 5:18 PM
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
in altre lingue
- English: Panasonic SCHTB500GS User manual
Documenti correlati
-
Panasonic SCHTB500 - HOME THEATER AUDIO SYSTEM Operating Instructions Manual
-
-
-
-
-
-
-
-
-
Panasonic SCHTB170EG Manuale del proprietario