Yamaha MDX-M5 Manuale del proprietario

Categoria
Lettori di cassette
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

MDX-M5
OWNER’S MANUAL
MODE D’EMPLOI
Minidisc Recorder
Lecteur Enregistreur De Minidisc
UCAB
22
SAFETY INSTRUCTIONS
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
dangerous voltage within the products
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
1 Read Instructions All the safety and operating
instructions should be read before the unit is
operated.
2 Retain Instructions The safety and operating
instructions should be retained for future reference.
3 Heed Warnings All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions All operating and other
instructions should be followed.
5 Water and Moisture The unit should not be used
near water for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6 Carts and Stands The unit should be used only with
a cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the unit and cart
combination to overturn.
7 Wall or Ceiling Mounting The unit
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8 Ventilation The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug, or similar surface, that
may block the ventilation openings; or placed in a
built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation
openings.
9 Heat The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources The unit should be connected to a
power supply only of the type described in the
operating instructions or as marked on the unit.
11 Power-Cord Protection Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
unit.
12 Cleaning The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods The power cord of the unit should
be unplugged from the outlet when left unused for a
long period of time.
14 Object and Liquid Entry Care should be taken so
that objects do not fall into and liquids are not spilled
into the inside of the unit.
15 Damage Requiring Service The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet
damaged.
16 Servicing The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization Precautions should be
taken so that the grounding or polarization is not
defeated.
IMPORTANT!
Please record the serial number of this unit in the
space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owners Manual in a safe place for future
reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
33
English
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
to use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class B digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit OFF and ON,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and
the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged
exposure from excessive volume levels.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off
and an appropriate 3 pin plug fitted. For details, refer to
the instructions described below.
Note: The plug severed from the mains lead must be
destroyed,
as a plug with bared flexible cord is hazardous
if engaged in a live
socket outlet.
IMPORTANT:
The wire in the mains lead are coloured in accor-
dance with the following code:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus
may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured
BLUE must be connected to the terminal which is
marked with the letter N or coloured BLACK. The
wire which is coloured BROWN must be connected
to the terminal which is marked with the letter L or
coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin
plug.
SPECIAL INSTRUCTIONS FOR U.K.
MODEL
44
SUPPLIED ACCESSORIES After unpacking, check that the following parts are contained.
ACCESSOIRES FOURNIS Après le déballage, vérifier que les pièces suivantes sont incluses.
Remote control transmitter
Télécommande
Batteries (size AAA, UM/SEM-4, R7, HP-8)
Piles (format AAA, UM/SEM-4, R7, HP-8)
Audio connecting cable
Câbles de connexion audio
System cable
Câble système
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
Optical fiber cable
Câble de fibres optiques
55
English
FRONT PANEL
PANNEAU FRONTAL
REAR PANEL
PANNEAU ARRIERE
STANDBY/ON
REC LEVEL
REC
010
+
LINE
OUT
LINE
IN
C D
L
R
SYSTEM
CONNECTOR
DIGITAL
OPTICAL
IN OUT
VOLTAGE SELECTOR
115V 230V
66
REMOTE CONTROL TRANSMITTER
TELECOMMANDE
DISPLAY
PANNEAU DAFFICHAGE
REPEAT LPGM MONO
REC
TITLE SEARCH dB 30 18 12 7 3 0 OVER ANALOG DIGITAL
RANDOM
SINGLE
TOTAL
REMAIN
R
A.PAUSE MANUAL
kHz
kHz
kHz
32
44.1
48
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
E-1
English
INTRODUCTION
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For
the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
ENGLISH
FEATURES
Random Access Programmable Play
Random-Sequence Play
Repeat Play
An Automatic Sampling Rate Converter (32,
48kHz 44.1kHz)
Four Editing Features (Move, Erase, Divide,
and Combine)
Title Filing Capability
Title Search Capability
Monaural recording for long time recording
Optical Digital Input/Output
Full Operation Remote control
CONTENTS
PRECAUTIONS ........................................... 2
NAMES OF BUTTONS, CONTROLS, AND
INDICATORS................................................ 3
GETTING STARTED
Connecting the unit to the CRX-M5.......... 4
Turning on/off the unit............................... 5
Preparing the remote control transmitter.. 6
PLAYBACK
MD playback............................................. 7
Selecting the time display......................... 8
Random-sequence play............................ 9
Repeat play ............................................ 10
Program play .......................................... 10
Auto pause function................................ 11
RECORDING
Before recording ..................................... 12
Recording on an MD .............................. 12
CD synchronized recording .................... 14
Monaural recording................................. 15
Changing recording mode ...................... 16
EDITING
Before you start editing .......................... 17
To undo an editing .................................. 17
Erase ...................................................... 18
Move....................................................... 19
Combine ................................................. 21
Divide ..................................................... 22
Titling...................................................... 23
OTHER OPERATIONS
Title search............................................. 25
Timer operation ...................................... 25
ADDITIONAL INFORMATION
MD system limitations ............................ 26
About copy protection............................. 27
Notes about handling MDs ..................... 27
Troubleshooting ...................................... 28
Display massages .................................. 29
Specifications ......................................... 30
When you connect the unit to CRX-M5
Automatic Synchronized Recording
Timer Play
Sleep Timer
Recording Using Timer
E-2
CAUTIONS
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install your unit in good ventilation, a cool, dry,
clean place away from windows, heat sources,
vibration, dust, moisture, or cold. To avoid humming
sounds, locate the unit away from other electrical
appliances, motors, and transformers. To prevent
fire or electrical shock, do not expose to rain and
water.
Do not operate the unit upside-down. It may
overheat, possibly causing damage.
Never open the cabinet. If something drops into the
set, contact your dealer.
Do not use force on switches, knobs or cords.
When not planning to use this unit for long periods
of time (i.e.., vacation, etc.), disconnect the AC
power plug from the wall outlet.
Grounding or polarization Precautions should be
taken so that the grounding or polarization of the
unit is not defeated.
Do not clean the unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
Be sure to read the TROUBLESHOOTING
section on common operating errors before
concluding that your unit is faulty.
Do not place another component on top of this unit,
as damage or discoloration on the surface of the
unit may result.
To prevent damage by lightning, disconnect the
power cord from the wall outlet during an electrical
storm.
When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
Do not plug the AC power plug to the wall outlet
before you finish all connections.
The voltage to be used must be the same as that
specified on this unit. Using this unit with a higher
voltage than that which is specified is dangerous
and may result in a fire or other type of accident
causing damage. YAMAHA will not be held
responsible for any damage resulting from use of
this unit with a voltage other than that which is
specified.
Sudden temperature changes and storage or
operation in an extremely humid environment may
cause condensation inside the cabinet.
PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
This compact disc player is
classified as a CLASS 1
LASER product.
The CLASS 1 LASER
PRODUCT label is located
on the rear exterior.
(U.K., Europe, Singapore,
and General models only.)
CLASS 1 LASER PRODUCT
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove a disc from
the unit, press STANDBY/ON to turn the unit off,
then disconnect the AC power plug from the wall
outlet.
DANGER
Invisible laser radiation when open and interlock
failed or defeated.
Avoid direct exposure to beam.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed
to consume a very small quantity of power.
NOTE
Please check the copyright laws in your country to
record from records, compact discs, radio, etc.
Recording of copyright material may infringe
copyright laws.
FOR CANADIAN CUSTOMERS
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
E-3
English
NAMES OF BUTTONS, CONTROLS, AND INDICATORS
FRONT PANEL (see the illustration on page 55)
1 STANDBY/ON switch (5)
2 Disc insert slot (7)
3 7 (stop) button (7)
4 8 (pause) button (7)
5 ) (eject) button (7)
6 3 (play) button (7)
REAR PANEL (see the illustration on page 55)
1 LINE OUT jacks (4)
2 LINE IN jacks (4)
3 AC power cord (4)
4 DIGITAL OPTICAL IN jack (4)
DISPLAY (see the illustration on page 66)
1 8 (pause) indicator (7)
2 # (play) indicator (7)
3 REC indicator (13)
4 TITLE indicator (23)
5 REPEAT indicator (10)
6 SEARCH indicator (25)
7 PGM (program) indicator (10)
8 RANDOM indicator (9)
9 Level indicator (13)
! ANALOG indicator (13)
REMOTE CONTROL TRANSMITTER (see the illustration on page 66)
1 REPEAT button (10)
2 RANDOM button (9)
3 POWER
/
button (5)
4 REC INPUT button (13)
5 REC MODE button (16)
6 EDIT CANCEL button (17)
7 EDIT button (18)
8 PGM (program)/CHARAC (character) button
(10, 24)
9 CHECK/SPACE button (11, 24)
! Number/character buttons (8, 24)
" 1/¡ (search) buttons (8)
# REC button (13)
7 Remote control sensor (6)
8 Display
9 REC button (13)
! REC LEVEL control (13)
" Jog dial/4/¢ (skip)/+/ control (8, 23)
5 DIGITAL OPTICAL OUT jack (5)
6 SYSTEM CONNECTOR jack (4)
7 VOLTAGE SELECTOR switch (This selector
on the bottom of the unit.) (2) (General model
only)
" MONO indicator (13)
# A.PAUSE indicator (11)
$ DIGITAL indicator (13)
% MANUAL indicator (14)
& SINGLE indicator (8)
( REMAIN indicator (9)
) TOTAL indicator (9)
~ Multi information display
+ Sampling rate indicator
$ 7 (stop) button (7)
% AUTO PAUSE button (11)
& DISPLAY button (8)
( AUTO/MANUAL button (14)
) TITLE INPUT buttons (23)
~ TITLE SEARCH button (25)
+ ENTER button (18)
, SET button (18)
- CLEAR/DELETE button (11, 24)
. 4 /¢ (skip) buttons (8)
/ 3 (play) button (7)
: 8 (pause) button (7)
GETTING STARTED
E-4
LINE
OUT
LINE
IN
C D
L
R
SYSTEM
CONNECTOR
DIGITAL
OPTICAL
IN OUT
AUX/MD
A
L
R
TAPE
MD
SYSTEM
CONNECTOR
DIGITAL OUT
L
R
BC D
TAPE
IN INOUT OUT
OUT
SUBWOOFERSPEAKERS
FM GND AM
ANTENNA
75
UNBAL
CD
OPTICAL
6 MIN. /SPEAKER
R L
++––
6 MIN. /HAUT-PARLEUR
Connecting the unit to
the CRX-M5
Never plug the AC power cord into the wall
outlet until all other connections are
completed.
Follow the steps below to connect to the CRX-M5
using the supplied cords and accessories.
1 Connect C to C, and D to D using the audio
connecting cords.
Insert the plugs into jacks of the same color.
The two audio connecting cords are the same,
so you can connect C or D using either cord.
The white plug of the audio connecting cord
corresponds to the left channel and the red plug
corresponds to the right channel. Make sure that
the left and right channel connections are
properly made, and that the plugs are inserted
firmly.
2 Connect the OPTICAL DIGITAL IN jack of the unit
and the DIGITAL OUT jack on the CRX-M5 with
the optical fiber cable.
3 Connect the unit and the CRX-M5 with the system
cable.
4 Connect the AC power cord to a wall outlet.
3
1
32
12
4
Playing CDsGetting Started
GETTING STARTED
E-5
English
Take off the covers of the optical fiber cable plug, the
OPTICAL DIGITAL OUT jack, and the DIGITAL IN
jack before digital connection.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function
correctly.
Be sure to replace the terminals cover when the
terminal on the rear panel is not being used, in
order to protect from dust.
Turning on/off the unit
Digital connections
If you have another MD deck or DAT deck, you can
make direct digital recording and enhance the sound
quality for recording by connecting the OPTICAL OUT
jack of the unit and the OPTICAL IN jack of another unit
with the optical fiber cable.
Other MD deck or DAT deck
This unit
Optical fiber cable (not include)
To the OPTICAL OUT jack
To the OPTICAL IN jack
After connecting the AC power cord to the wall outlet,
press the STANDBY/ON switch on the front panel or
POWER on the remote to turn on/off the unit.
STANDBY/ON
REC LEVEL
REC
010
+
STANDBY/ON
POWER
LINE
OUT
LINE
IN
A B
L
R
SYSTEM
CONNECTOR
DIGITAL
OPTICAL
IN OUT
OPTICAL
OUT IN
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
GETTING STARTED
E-6
STANDBY/ON
REC LEVEL
REC
010
+
30°
30°
Preparing the remote
control transmitter
Loading the batteries for the remote control
transmitter
1 Remove the battery compartment cover.
2 Insert 2 AAA size batteries into the battery
compartment.
3 Replace the battery compartment cover.
Battery replacement
If you find that the remote control transmitter must be
used closer to the main unit than usual, the batteries
are weak. Replace both batteries with new ones.
Notes
Use only AAA batteries for replacement.
Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
Remove the batteries if the remote control transmitter
will not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in
contact with clothing, etc. Clean the battery
compartment thoroughly before installing new
batteries.
Remote control transmitter operation range
Notes
There should be no large obstacles between the
remote control transmitter and the main unit.
If the remote control sensor is directly illuminated by
strong lighting (especially an inverter type of
fluorescent lamp etc.), it might cause the remote
control transmitter not to work correctly. In this case,
reposition the main unit to avoid direct lighting.
Remote control
sensor
Within approximately
6 m (19.7 feet)
+
+
Note
This manual describes how to operate this unit by using
the remote control transmitter mainly. To operate the
unit from the front panel, use the corresponding buttons
on the front panel (see page 3).
Playing CDsGetting Started
PLAYBACK
E-7
English
1 Press STANDBY/ON or POWER to turn on the
unit.
When you turn on the CRX-M5, the unit turns on
automatically as it is connected to the CRX-M5
with the system cable.
2 Insert an MD.
Insert the MD securely so that it clicks into place.
3 Press 3 to start playback.
Playback starts from the beginning track of the
MD.
To stop playback completely
Press 7.
To stop playback temporarily
Press 8.
To resume playback, press 8 again or press 3.
To eject an MD
Press ).
MD playback
Label facing up
Arrow pointed toward the disc insertion
slot
STANDBY/ON
REC LEVEL
REC
010
+
)
POWER
8
3
7
STANDBY/ON
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
PLAYBACK
E-8
To play a specific track on the disc
Direct play
Select a desired track by using the number buttons.
(Example: To select 235, press +100 twice so that 2
–” appears in the display, and press + 10 three times so
that 2 3 –” appears in the display, then press 5.)
The unit starts playback from the selected track
automatically.
Skip play
To skip to a succeeding track, press ¢ once or
repeatedly, or turn the jog dial clockwise until the
desired track number appears.
To skip to the beginning of the current track, press
4 once, or turn the jog dial counterclockwise so
that it clicks.
To skip to a preceding track, press 4 once or
repeatedly, or turn the jog dial counterclockwise until
the desired track number appears.
Notes
You cannot enter a number that is higher than the last track
number on the disc.
These operations can also be performed when the unit is in
the pause or stop mode.
If ¢ or 4 is pressed and held, the track number
successively changes to higher numbers (or lower
numbers).
To advance or reverse play rapidly
(Manual Search)
Press and hold ¡ to advance playback rapidly, and
1 to reverse playback rapidly.
The sound can be heard (although slightly garbled)
during manual search in either direction. This is
convenient for locating a precise position within a track,
or for reviewing the contents quickly.
Note
Manual search can also be performed during pause, though
no sound will be heard.
Selecting the time display
When you insert an MD the disc title is displayed
automatically. Pressing DISPLAY during playback or
stop lets you display other information, such as the
remaining time and track titles.
Each time you press DISPLAY, the display changes as
follows:
Elapsed timeTrack number
Disc title (during stop) or track title
(during playback)
Remaining time
Selected track
DISPLAY
SINGLE
SINGLE
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
Playing CDsGetting Started
PLAYBACK
E-9
English
To start random-sequence play
Press RANDOM.
RANDOM appears in the display.
Playback starts automatically.
To cancel random-sequence play mode
Press 7.
RANDOM disappears from the display.
Notes
This feature will not function during programming, or
during programmed play.
If ¢ is pressed during random-sequence play, the
next randomly programmed track will be played.
If 4 is pressed, play will return to the beginning of
the current track.
Random-sequence play
The unit can play all the tracks on an MD in a random
sequence selected by the units microcomputer.
Total playing time
Total remaining time
Remaining recordable time
Disc title or track title
RANDOM
7
TOTAL
REMAIN
RANDOM
SINGLE
TOTAL
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
PLAYBACK
E-10
1 Press REPEAT.
REPEAT appears in the display.
2 Press 3 to start repeat play.
To cancel repeat play mode
Press REPEAT so that REPEAT disappears from the
display.
Note
You can enjoy repeat play during random-sequence
play. In this case, the unit plays the disc repeatedly in
the different order.
Repeat play
You can play a disc repeatedly.
1 Press 7 to stop the unit.
2 Press PGM.
PGM appears in the display.
3 Select the desired track by using the number
buttons.
Program play
By creating a program, you can enjoy listening to your
favorite tracks in any desired order. As many as 32
steps can be programmed in sequence.
REPEAT
3
PGM
3
Number buttons
7
REPEAT
PGM
TOTAL
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
Playing CDsGetting Started
PLAYBACK
E-11
English
4 Press PGM.
The selected track is programmed.
5 Repeat steps 3 and 4 to program more tracks. You
can select the same track again.
6 Press 3 to start program play.
To stop program play mode
Press 7.
To cancel program play
Press PGM so that PGM disappears from the display.
The program you set is erased.
Notes
You cannot program a track which is not included in a disc.
¢ or 4 can be used during program play to skip to
tracks within the program.
To check the program data
1. Press 7 to stop program play.
2. Press CHECK. Each time you press this button,
the track number and the program number are
displayed in the order of the program.
To change program data
1. Follow the preceding procedure described in To
check the program data.
2. Display the track number to be corrected by
pressing CHECK.
3. Press the number button of the track you want to
substitute for the one currently displayed. The
previously programmed track will be cleared from
the memory and the new one will be programmed.
4. Press PGM.
To delete tracks from the program
Press CLEAR during stop in program play mode.
The last programmed track is erased.
Program number
Selected track
number
PGM
Press AUTO PAUSE so that A. PAUSE appears in
the display.
The unit pauses playback after playing the current
track.
To resume playback
Press 8 or 3.
To cancel auto pause function
Press AUTO PAUSE so that A. PAUSE disappears
from the display, or press POWER to turn off the unit.
Auto pause function
The unit can automatically pause playback after
playing the current track.
AUTO PAUSE
3
8
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
RECORDING
E-12
Before recording
MDs (Mini Disc) let you digitally record and play music
with high quality sound. Another feature of MDs is track
marking. The track marking feature lets you quickly
locate a specific point or easily edit the recorded
tracks. However, depending on the source you record
from, the recording method and the way the track
numbers are recorded differs.
Notes on digital recording
When recording from a digital source (such as CD,
DAT, etc.), the unit converts the digital signals to
44.1 kHz for recording onto the MD.
The unit can record 32, 44.1, and 48 kHz digital
signals.
When recording from an analog source (such as
cassette tape, tuner, etc.), the unit converts the
analog signals to a 44.1 kHz digital signal.
When the source you record from is:
CRX-M5’s CD player
You can record from CD to MD with the CD
synchronized recording function (see page 14).
The digital signal from the CD is recorded as it is.
Track numbers are automatically marked as on the
original CD.
Other digital components
Track numbers are automatically marked as it is
when you turn on the Auto track marking function
(see page 14).
CRX-M5’s tuner or other analog components
The analog signal is converted to a digital signal
and recorded.
Track numbers are automatically marked when you
turn on the Auto track marking function (see page
14) in sync with the level of the input signal.
1 Turn on the recording source and set it for
playback.
2 Insert an MD.
Recording on an MD
Arrow pointed toward the disc insertion slot
Label facing up
POWER
REC INPUT
8
7
REC
Notes about TOC
On an MD, the track number (track sequence), playback
times, title data, etc., are recorded in the TOC area
independent of the sound information. You can edit
recorded tracks quickly by modifying the TOC information.
Recording on an MD is completed when the TOC writing is
finished. Normally, the TOC information is written
automatically, but you can set it manually by setting REC
END WRITING function to OFF (page 16). TOC writing
starts when you do any of the following operations.
Eject the MD.
Press STANDBY/ON.
In this case, if you pull out the AC power cord before TOC
writing is finished, the recorded contents will not be
memorized on the MD.
TOC writing may be impossible (or Auto track number
marking may not perform as expected) when recording a
damaged CD or a broadcast source under interference.
POWER RANDOM REPEAT
AUTO
PAUSE DISPLAY
EDIT
PGM CHECK CLEAR ENTERSET
/
CHARAC SPACE DELETE
1
A B C D E F J K LG H I
2345
67890
+100
+10
M N O P R S T U V Q ZW X Y
& ( ) / , : ? !
REC
REC
INPUT
REC
MODE
AUTO/
MANUAL
EDIT
CANCEL
TITLE
SEARCH
TITLE
INPUT
Playing CDsGetting Started
RECORDING
E-13
English
3 Press REC INPUT repeatedly to select the input
connected to the sound source you want to record
from.
The selected indicator appears in the display.
4 Press REC to set the unit to recording pause
mode.
REC and 8 appear in the display.
If you selected ANALOG or MONO in step 3,
adjust the recording level as described in
“Recording level” on this page.
5 Start playing the source to be recorded.
6 Press REC or 8 to start recording.
To stop recording
Press 7.
To pause recording
Press 8.
Press 8 again or REC to resume recording.
For normal recording from the
LINE IN input
(Ex. Tuner, tape deck,etc.)
For digital recording from the
DIGITAL IN input
(Ex. CD, DAT deck,etc.)
For long recording (monaural) from
the LINE IN input (see page 15)
Notes
When recording from a digital source other than the CRX-
M5 that has a digital output (volume) control, set the output
level to MAX. Recording may not be possible at low output
levels (when the digital volume is turned down).
Each time you press DISPLAY while recording, the display
changes as follows:
After recording
Press POWER or press STANDBY/ON to turn the unit
off. The unit updates the TOC information of the MD
and the recording is completed.
Recording level
To set the recording level, first play the loudest
passage of the source to be recorded. Then set the unit
to the record pause mode (press REC) and watch the
meter readings. Adjust the recording level by turning
the REC LEVEL control so that the highest peak
causes the 0 dB level indicators to flicker. The OVER
indicators should not light.
Note
Although some sources can be recorded with lower peak
levels, setting the peak levels too low may degrade the
quality of the recording.
Current track number and recording time of
the current track
Current tracks and total playing time
Remaining recordable time
«
«
STANDBY/ON
REC LEVEL
REC
010
+
L
dB 30 18 12 7 3 0 OVER
R
REC LEVEL
OVER indicator
ANALOG
TOTAL
DIGITAL
TOTAL
MONO
ANALOG
TOTAL
RECORDING
E-14
Auto track marking
When making a recording, you can choose either
automatic or manual track marking. This feature
operates somewhat differently for analog and digital
signals. See below for details.
Press AUTO/MANUAL repeatedly to select automatic
track marking (MANUAL disappears from the display)
or manual track marking (MANUAL appears in the
display).
When recording analog signals
Auto: Track numbers are written in synchronization
with the input level of the signal being recorded. In
other words, if the source signal falls below a certain
level for more than 2 seconds, a track number is written
automatically the next time the source signal rises
above that level. You can change the level and time
settings (see page 16).
Manual: One track number is written automatically
when you start recording, but none are written during
recording. To write track number manually, press EDIT
at the desired point during recording.
When recording digital signals
Track numbers are written in the same positions as the
original source (CD, etc.) with automatic track marking.
When you set the unit to manual track marking, press
EDIT at the desired point to write track number during
recording.
Note
When recording is paused, the portion recorded up to the
pause is counted as an individual track. When recording is
resumed, a new track number is created. On the other hand,
if one track is recorded in continuous repetition, that track is
recorded as one continuous track with a single track
number.
CD synchronized recording
You can easily record a CD on a MD when you
connect the unit to the CRX-M5.
This function is operated from the CRX-M5. For more
details, see the instructions of the CRX-M5.
1 Insert the desired disc into the CRX-M5.
2 Insert an MD.
3 Press DISC 1 3 to select the desired CD, then
press 7 after playing for several seconds.
4 Press CD SYNC when both units are in stop mode
and press 4/¢ repeatedly so that CD MD
appears in the display.
5 Press CD SYNC .
The CRX-M5 starts CD play from the beginning of
a disc and the unit starts recording automatically.
6 Both units stop automatically when recording is
finished.
To stop CD synchronized recording
Press 7 (CRX-M5) or 7 (MDX-M5).
When you press 7 (MDX-M5) and the REC END
WRITING function set to ON, the CRX-M5 stops about
10 seconds after you press the button.
Notes
You can record a CD on an MD with CD synchronized
recording by using various way as follows:
recording from the desired track of a CD
recording programmed track
When the MD becomes full in the middle of the recording,
both units stop.
Adjusting the VOLUME control of the CRX-M5 has no effect
on the recorded sound.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37

Yamaha MDX-M5 Manuale del proprietario

Categoria
Lettori di cassette
Tipo
Manuale del proprietario
Questo manuale è adatto anche per