Sharp LL-171A LL-171G Manuale utente

Marca: Sharp

Modello: LL-171A LL-171G

Categoria: TV

Tipo: Manuale utente

Questo manuale è adatto anche per

LL-171A/171G

LCD Monitor

LCD Farbmonitor

Moniteur LCD

Monitor LCD

LL-171A

LL-171G

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D'EMPLOI

MANUALE D'USO

MANUAL DE FUNCIONAMIENTO

LL-171A

171AG_cover1-2.P65 12/4/2003, 1:12 PM1

Table of Contents/Inhaltsverzeichnis/Table des matières/Indice/Índice

Notice for Users in the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Notice for Users in Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Notice for Users in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notice for Users in Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

TCO'99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

171AG_cover1-2.P65 12/4/2003, 1:12 PM2

EnglishDeutschFrançaisItalianoEspañolEnglish

Notice for Users in the USA

FCC Statement

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class

B computing equipment.

Declaration of Conformity

SHARP LCD Color Monitor LL-171A-W/LL-171A-B/LL-171G-W/LL-171G-B

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Responsible Party: SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

TEL: 1-800-BE-SHARP

* As an ENERGY STAR

Partner, SHARP has determined that this product meets the ENERGY

STA R

guidelines for energy efficiency.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.

Disposal of these materials may be regulated due to environmental considerations. For disposal or

recycling information, please contact your local authorities or the Electronics Industries

Alliance: www.eiae.org

IMPORTANT:

To aid in reporting in case of loss or theft, please

record the monitor's model and serial numbers in

the space provided. The numbers are located on

the rear of the monitor.

Model No.:

Serial No.:

171AG_notice.P65 12/4/2003, 1:14 PM3

Notice for Users in Europe

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended

by 93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit

Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées

par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/

EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata

dalla direttiva 93/68/EEC.

Η εγκατασταση ανταποκρινεται στιζ απαιτησειζ των οδηγιων τηζ Ευρωπαïκηζ Ενωσηζ 89/336/ΕΟΚ κατ

73/23/ΕΟΚ, óπωζ οι κανονισµοι αυτοι συµπληρωθηκαν απó την οδηγια 93/68/ΕΟΚ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão

corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por

medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som komplette ras

av 93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/

68/EEC.

CAUTION:

TO PREVENT ELECTRICAL SHOCK, DISCONNECT THE AC CORD BEFORE SERVICING.

CAUTION:

FOR A COMPLETE ELECTRICAL DISCONNECTION, PULL OUT THE MAIN PLUG.

VORSICHT:

UM DIE STROMZUFUHR VOLLSTÄNDIG ZU UNTERBRECHEN, DEN NETZSTECKER HERAUSZIEHEN

ENTFERNEN.

ATTENTION :

POUR UN ARRET TOTAL DE L'APPAREIL, DEBRANCHEZ LA PRISE DU COURANT SECTEUR.

VARNING:

FÖR TOTAL ELEKTRISK URKOPPLING, KOPPLA UR KONTAKTEN OCH.

PRECAUCION:

PARA UNA COMPLETA DESCONEXION ELECTRICA DESENCHUFE LA CLAVIJA DE LA RED.

PRECAUCION:

A FIN DE EVITAR DESCARGAS ELÉCTRICAS, DESCONECTE EL ENCHUFE DE LA RED ANTES DE

REALIZAR CUALQUIER OPERACIÓN DE SERVICIO.

ATTENZIONE:

PER EVITARE FOLGORAZIONI, SCOLLEGATE IL CAVO DI COLLEGAMENTO ALLA RETE IN

ALTERNATA PRIMA DI EFFETTUARE UN INTERVENTO DI SERVIZIO TECNICO.

ATTENZIONE:

PER UNO SCOLLEGAMENTO ELETTRICO COMPLETO, TIRATE FUORI LA SPINA PRINCIPALE.

171AG_notice.P65 12/4/2003, 1:14 PM4

EnglishDeutschFrançaisItalianoEspañolEnglish

Notice for Users in the UK

Notice for Users in Australia

Service Inquiries

Please contact your dealer for service if required or contact Sharp Corporation of Australia on

1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : Earth

BLUE : Neutral

BROWN : Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markings identifying the terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug

which is marked by the letter E or by the safety earth

or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the

letter L or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified

electrician.

"WARNING: THIS APPARATUS MUST BE EARTHED."

171AG_notice.P65 12/4/2003, 1:14 PM5

Congratulations!

You have just purchased a TCO'99 approved and

labelled product! Your choice has provided you with a

product developed for professional use. Your purchase

has also contributed to reducing the burden on the

environment and also to the further development of

environmentally adapted electronics products.

Why do we have environmentally labelled

computers?

In many countries, environmental labelling has become

an established method for encouraging the adaptation of

goods and services to the environment. The main

problem, as far as computers and other electronics

equipment are concerned, is that environmentally

harmful substances are used both in the products and

during their manufacture. Since it is not so far possible to

satisfactorily recycle the majority of electronics

equipment, most of these potentially damaging

substances sooner or later enter nature.

There are also other characteristics of a computer, such

as energy consumption levels, that are important from

the viewpoints of both the work (internal) and natural

(external) environments. Since all methods of electricity

generation have a negative effect on the environment

(e.g. acidic and climate-influencing emissions,

radioactive waste), it is vital to save energy. Electronics

equipment in offices is often left running continuously

and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'99

scheme which provides for international and

environmental labelling of personal computers. The

labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional

Employees), Svenska Naturskyddsforeningen (The

Swedish Society for Nature Conservation) and Statens

Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues:

environment, ergonomics, usability, emission of electric

and magnetic fields, energy consumption and electrical

and fire safety.

The environmental demands impose restrictions on the

presence and use of heavy metals, brominated and

chlorinated flame retardants, CFCs (freons) and

chlorinated solvents, among other things. The product

must be prepared for recycling and the manufacturer is

obliged to have an environmental policy which must be

adhered to in each country where the company

implements its operational policy.

The energy requirements include a demand that the

computer and/or display, after a certain period of

inactivity, shall reduce its power consumption to a lower

level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental

demands, for example, in respect of the reduction of

electric and magnetic fields, physical and visual

ergonomics and good usability.

Below you will find a brief summary of the environmental

requirements met by this product. The complete

environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO'99 approved and

labelled products may also be obtained via the Internet,

using the address: http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards,

cables, wires, casings and housings. Their purpose is to

prevent, or at least to delay the spread of fire. Up to 30%

of the plastic in a computer casing can consist of flame

retardant substances. Most flame retardants contain

bromine or chloride, and those flame retardants are

chemically related to another group of environmental

toxins, PCBs. Both the flame retardants containing

bromine or chloride and the PCBs are suspected of

giving rise to severe health effects, including

reproductive damage in fish-eating birds and mammals,

due to the bio-accumulative* processes. Flame

retardants have been found in human blood and

researchers fear that disturbances in foetus

development may occur.

The relevant TCO'99 demand requires that plastic

components weighing more than 25 grams must not

contain flame retardants with organically bound bromine

or chlorine. Flame retardants are allowed in the printed

circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the

colour-generating layers of certain computer displays.

Cadmium damages the nervous system and is toxic in

high doses. The relevant TCO'99 requirement states that

batteries, the colour-generating layers of display

screens and the electrical or electronics components

must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and

switches. It damages the nervous system and is toxic in

high doses. The relevant TCO'99 requirement states that

batteries may not contain any mercury. It also demands

that mercury is not present in any of the electrical or

electronics components associated with the labelled unit.

There is however one exception. Mercury is, for the time

being, permitted in the back light system of flat panel

monitors as there today is no commercially available

alternative. TCO aims on removing this exception when

a mercury free alternative is available.

CFCs (freons)

The relevant TCO'99 requirement states that neither

CFCs nor HCFCs may be used during the manufacture

and assembly of the product. CFCs (freons) are

sometimes used for washing printed circuit boards.

CFCs break down ozone and thereby damage the

ozone layer in the stratosphere, causing increased

reception on earth of ultraviolet light with e.g. increased

risks of skin cancer (malignant melanoma) as a

consequence.

Lead**

Lead can be found in picture tubes, display screens,

solders and capacitors. Lead damages the nervous

system and in higher doses, causes lead poisoning. The

relevant TCO'99 requirement permits the inclusion of

lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which

accumulate within living organisms.

** Lead, Cadmium and Mercury are heavy metals which

are Bio-accumulative.

171AG_notice.P65 12/4/2003, 1:14 PM6

EnglishDeutschFrançaisItalianoEspañolEnglish

Table of Contents

Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Angle adjustment, height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Securing the cables [LL-171G] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the monitor to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connection of headphones (commercially available) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting the monitor to a power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing between input terminals [LL-171G] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Turning the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjusting the screen display and speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Checking product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Adjusting the screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Automatic screen adjustment (When using an analog signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Manual screen adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Monitor care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Monitor care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Installing set-up information and the ICC profile (For Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Information about the ColorSync profile (For MacOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Instructions for attaching a VESA-compliant arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

171AG_gb.P65 12/4/2003, 1:14 PM7

Tips and safety precautions

Location

- Do not use the monitor where ventilation is poor,

where there is a lot of dust, where humidity is

high, or where the monitor may come into

contact with oil or steam, as this could lead to

fire.

- Ensure that the monitor does not come into

contact with water or other fluids. Ensure that no

objects such as paper clips or pins enter the

monitor as this could lead to fire or electric

shock.

- Do not place the monitor on top of unstable

objects or in unsafe places. Do not allow the

monitor to come into contact with strong shocks

or vibrations. Causing the monitor to fall or

topple over may damage it.

- Do not use in places where the monitor will be

subject to direct sunlight, near heating

equipment or anywhere else where there is

likelihood of high temperature, as this may lead

to generation of excessive heat and outbreak of

fire.

The Power Cord

- Do not damage the power cord nor place heavy

objects on it, stretch it or over bend it. Also, do

not add extension cords. Damage to the cord

may result in fire or electric shock.

- Use only the power cord supplied with the monitor.

- Insert the power plug directly into the AC outlet.

Adding an extension cord may lead to fire as a

result of overheating.

- Do not remove or insert the power plug with wet

hands. Doing so could result in electric shock.

- The TFT color LCD panel used in this monitor is

made with the application of high precision

technology. However, there may be minute

points on the screen where pixels never light or

are permanently lit. Also, if the screen is viewed

from an acute angle there may be uneven colors

or brightness. Please note that these are not

malfunctions but common phenomena of LCDs

and will not affect the performance of the

monitor.

- Do not display a still picture for a long time, as

this could cause an afterimage to remain.

- If the brightness is adjusted to the minimum

setting it may be difficult to see the screen.

- The quality of the computer signal may influence

the quality of the display. We recommend using

a computer able to emit high quality video

signals.

- Never rub or tap the monitor with hard objects.

- Please understand that Sharp Corporation bears

no responsibility for errors made during use by

the customer or a third party, nor for any other

malfunctions or damage to this product arising

during use, except where indemnity liability is

recognized under law.

- This monitor and its accessories may be

upgraded without advance notice.

171AG_gb.P65 12/4/2003, 1:14 PM8

EnglishDeutschFrançaisItalianoEspañolEnglish

Tips and safety precautions

Monitor and accessory checklist

- Please check that the following items are

included in the package.

- LCD monitor (1)

- Analog signal cable (1)

(model name: 0NW1738GAB01A)

- [LL-171G] Digital signal cable (1)

(model name: 0NW1748LAB007)

- Audio cable (1)

(model name: 0NW0173056023)

- [LL-171G] Cable clamp (2)

- CD-ROM (1)

- Operation manual (1)

Notes:

- [LL-171A] Use only the cables supplied with the

monitor.

- Be sure to use cables that are less than 3 m in

length.

- [LL-171G] The analog signal cable (DVI-I29 pin

– mini D-sub15 pin) is to be purchased

separately.

(model name: NL-C02E)

- [LL-171G] The 2-input cable (DVI-I29 pin –

DVI-D24 pin/mini D-sub15 pin) is to be

purchased separately.

(model name: NL-C03J)

- You are advised to retain the carton in case the

monitor needs to be transported.

- Sharp Corporation holds authorship rights to the

Utility Disk program. Do not reproduce it without

permission.

- The shape of the supplied accessories may not

be exactly same as shown in this manual.

Manual Scope

- This manual is written for use with the LL-171A

and the LL-171G. When describing a different

specification between the models, the model

name is also given. (If the model name isn't

given, the description is true for both models. For

product appearance, illustrations of the LL-171A

are used in this manual.)

- In this manual, Microsoft Windows XP will be

referred to as "Windows XP", Microsoft Windows

Millennium as "Windows Me", Microsoft

Windows 2000 as "Windows 2000", Microsoft

Windows 98 as "Windows 98", Microsoft

Windows 95 as "Windows 95", and Microsoft

Windows Version 3.1 as "Windows 3.1". When

there is no need to distinguish between

programs, the term "Windows" will be used.

- Microsoft and Windows are registered

trademarks of Microsoft Corporation.

- Macintosh is a registered trademark of Apple

Computer, Inc.

- All other brand and product names are

trademarks or registered trademarks of their

respective holders.

171AG_gb.P65 12/4/2003, 6:52 PM9

11 121413

109 11 1413

1 2 3 4 1 2 3 4

1. AUTO button [LL-171A] ........... This button is used to perform automatic adjustment of the screen

(CLOCK, PHASE, H-POS and V-POS). (p.19)

INPUT button [LL-171G] ......... To switch between the signal's input terminals.

2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3. / MODE button ..................... When the OSD Menu is displayed:

This button is used to select menu options.

When the OSD Menu is not displayed:

This button is used to set DISPLAY MODE.

buttons ............................. When the OSD Menu is displayed:

These buttons are used to select an option or adjust the value of the

selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness and speaker

volume.

5. Speakers.................................. Audio entering via the external device connected to the monitor can

be heard.

6. Headphone terminal ............... Headphones (commercially available) can be connected here.

7. Power button ............................ Pressing this button turns the power on.

Press the button again to turn the power off.

8. Power LED ...............................

This LED is lit green when in use and orange when in power-saving mode.

9. Main power switch

10. Power terminal

11. Audio input terminal ................ A computer's audio output terminal can be connected here. The audio

cable included should be used.

12.

DVI-I input terminal [LL-171G]

..... The computer's digital RGB output terminal or analog RGB output

terminal can be connected here.

For a digital signal input: It can be connected to a computer with a

DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and

which has SXGA output ability. Depending on the computer to be

connected, correct display may or may not be possible.

13. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable

included should be used.

14. Security lock anchor ................ By connecting a security lock (commercially available) to the security

lock anchor, the monitor is fixed so that it cannot be transported.

The security slot works in conjunction with Kensington Micro Saver

Security Systems.

15. Ventilation openings................ Never block the ventilation openings as this may lead to overheating

inside the monitor and result in malfunction.

Product description

[LL-171A][LL-171G]

(INPUT-2)

(INPUT-1)

171AG_gb.P65 12/4/2003, 1:14 PM10

EnglishDeutschFrançaisItalianoEspañolEnglish

CAUTION!

- Be sure to hold both sides of the monitor when

adjusting the viewing angle. The LCD panel

used in this monitor is made of glass. Pressure

from hands on the LCD panel could cause

damage.

- Be careful not to allow your fingers to be

pinched.

Angle adjustment

Height adjustment [LL-171G]

1.Release the lock.

2.Adjust the height of the stand.

3.Set the lock.

3 1

CAUTION!

- Be sure to release the lock before adjusting the

height of the stand. Extending/contracting the

stand when it's locked may result in damage to

the product.

- Ensure that the stand is properly locked except

while adjusting the height.

Angle adjustment, height adjustment

approx. 70 mm

approx. 45°

approx. 25°

approx. 5°

[LL-171A]

approx. 25°

approx. 5°

[LL-171G]

171AG_gb.P65 12/4/2003, 1:14 PM11

CAUTION!

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to over bend the cable or add

extension cords as this could lead to a

malfunction.

Securing the cables [LL-171G]

Use the supplied cable clamps to secure the

cables connected to the terminals.

The upper and lower cable clamps have different

shapes. Check the shapes of the clamps before

attaching them to the stand.

CAUTION!

- When adjusting the viewing angle, cables may

be pulled. Therefore, ensure that the cables

have sufficient slack.

Connecting the monitor to a computer

Analog connection [LL-171A]

Connect the accessory analog signal cable to the

analog RGB output terminal of the computer.

- Paying attention to connector direction, firmly

insert the signal cable vertically into the

connector, and then tighten the screws at both

sides.

Connecting the monitor and turning the monitor on and off

Analog signal cable

Analog RGB terminal

(Mini D-sub 15 pin, 3 row)

Orient the side of the clamp

with the protrusion to the

stand and attach the clamp.

171AG_gb.P65 12/4/2003, 1:14 PM12

EnglishDeutschFrançaisItalianoEspañolEnglish

Digital connection [LL-171G]

Connect the accessory digital signal cable to the

digital RGB output terminal of the computer.

- The monitor has an input for connecting to a

computer with a DVI-compatible output

connector (DVI-D24 pin or DVI-I29 pin) and

SXGA output capability. (Depending on the type

of computer to be connected, the display may

not work correctly.)

- Paying attention to connector direction, firmly

insert the signal cable vertically into the

connector, and then tighten the screws at both

sides.

Set the monitor as follows when establishing a

digital connection with a Power Mac using an ADC-

DVI adapter made by Belkin. (Operation has been

checked with the Power Mac G4 M7627J/A.)

- Perform settings with the Power Mac power

supply off.

1.After connecting the power cord, turn on the

monitor's main power.

2.Press the

button and button simultaneously,

and while doing this press the power button (i.e.

turn the power on).

[MENU]

MAC DIGITAL

INPUT-2 OFF ON

3.Set to [ON] with the buttons.

- Do not set to [ON] if you are not using a Belkin

ADC-DVI adapter, as this may result in

incorrect display.

4.Press the MENU button.

This completes setting.

Connecting the monitor and turning the monitor on and off

Analog connection [LL-171G]

Connect the accessory analog signal cable, or

separately-sold analog signal cable (model name:

NL-C02E) to the analog RGB output terminal of

the computer.

- Connect the accessory analog signal cable to

the analog RGB input terminal (INPUT-1).

- Connect the separately-sold analog signal cable

(model name: NL-C02E) to the DVI-I input

terminal (INPUT-2).

- Paying attention to connector direction, firmly

insert the signal cable vertically into the

connector, and then tighten the screws at both

sides.

If connecting to a D-sub15 pin 2 row Apple Power

Macintosh, attach a Macintosh conversion adapter

(commercially available) to the analog signal

cable.

Note:

- If connecting to the Sun Ultra series, a

conversion adapter (commercially available)

may be required.

Macintosh conversion adapter

Analog signal cable Analog RGB output

terminal

DVI-I input terminal

(INPUT-2)

Analog RGB

input terminal

(INPUT-1)

Digital signal cable

Digital RGB output terminal

DVI-I input terminal

(INPUT-2)

171AG_gb.P65 12/4/2003, 1:14 PM13

When connecting using a separately sold

2-input cable [LL-171G]

The separately sold 2-input cable (model name:

NL-C03J) enables connection between the DVI-I

input terminal on the monitor and the two

computers. (One analog and one digital

connection.)

1.Connect the 2-input cable to the DVI-I input

terminal of the monitor.

2.Connect the accessory or commercially

available analog signal cable and the accessory

digital signal cable to the 2-input cable.

- When using commercially available analog

signal cable, both ends should be mini D-sub

15 pin.

3.Connect each signal cable to the computers.

- Paying attention to connector direction, firmly

insert the signal cable into the connector, and

then tighten the screws at both sides.

Connecting the monitor and turning the monitor on and off

Digital RGB

output terminal

Digital signal cable

2-input cable

(purchased

separately)

Mini D-sub15 pin

DVI-D24 pin

Analog RGB

output terminal

Analog signal

cable

DVI-I input terminal

(INPUT-2)

Notes:

- When using the 2-input cable, set the

connecting input terminal [INPUT-2] to [2LINES]

under the MODE SELECT-2 Menu. (p.22)

- The monitor connected to the 2-input cable by

analog connection may not be automatically

recognized and setup under Plug & Play.

Perform storage of setup information manually.

(p.28)

Connect the accessory audio cable

When the accessory audio cable is connected to

the audio output terminal of the computer, the

sound of the connected computer is output from

the monitor speakers. You can also use the

headphone jack of the display.

Audio output terminal

Audio cable

Audio input terminal

171AG_gb.P65 12/4/2003, 1:14 PM14

EnglishDeutschFrançaisItalianoEspañolEnglish

Connection of headphones

(commercially available)

Headphones (commercially available) can be

connected.

Note:

- When the headphones are connected, no sound

can be heard from the monitor speakers.

Connecting the monitor to a power

source

Connecting the monitor and turning the monitor on and off

Turning the power on

1.Turn on the main power of the monitor.

- When switching the main power switch on and

off, always wait for an interval of at least 5

seconds. Rapid switching may result in

malfunction.

2.Press the monitor's power button.

3.Turn on the computer.

When a signal is input from the computer, the

power LED lights up green, and the screen is

displayed. (After power is turned on, it may take

a little time until the screen is displayed.)

Note for LL-171G:

- If the input terminal to which the computer is

connected has not been selected, the screen

will not be displayed. If necessary, perform input

terminal switching. (p.16)

Notes:

- When using an analog signal, perform an

automatic screen adjustment under the following

conditions (p.19):

- Using the monitor for the first time.

- After having changed the system settings

during use.

- When using the LL-171G with a digital connection,

automatic screen adjustment is unnecessary.

- Depending on the type of computer or OS, you

may need to install the monitor set-up

information on your system. (p.28)

- When connecting to a notebook, if the notebook

computer's screen is set to display at the same

time, the MS-DOS screen may not display

properly. In this case, change the setting to

display only the LCD monitor.

Turn on the

computer power

supply.

Headphones

Headphone terminal

AC outlet

Power cord

Power terminal

Main power switch

Press power button.

171AG_gb.P65 12/4/2003, 1:14 PM15

Turning the power off

1.Turn the computer off.

2.Press the monitor's power button.

The power LED will disappear.

If the monitor will not be used for a long time, turn

off the main power switch of the monitor, and

remove the power plug from the outlet.

Connecting the monitor and turning the monitor on and off

Changing between input terminals

[LL-171G]

Use the INPUT button to switch between signal

input terminals.

Analog RGB input terminal DVI-I input terminal

INPUT-1

INPUT-2

< >

INPUT

When using a 2-input cable

Analog RGB input terminal

INPUT2-A

INPUT2-D

INPUT

INPUT-1

INPUT

Note:

- When there is no input signal, [NO SIGNAL] is

displayed.

OFF

Turn the computer

off.

Press power button.

DVI-I input terminal

(analog)

DVI-I input terminal

(digital)

171AG_gb.P65 12/4/2003, 1:14 PM16

EnglishDeutschFrançaisItalianoEspañolEnglish

Adjusting the screen display and speaker volume

Adjustment lock function

By disabling the control buttons (i.e. setting the

lock) any attempted changes to adjusted values

will be voided.

1. Turn off the monitor power.

2.While pressing the MENU button, press the

power button (i.e. turn the power on).

Continue to press the buttons until

[

ADJUSTMENT LOCKED

] appears on the screen.

The lock is set when the message is displayed.

Note:

- When the lock is in place, all buttons other than

the power button are disabled.

Adjustment lock release

1. Turn off the monitor power.

2.While pressing the MENU button, press the

power button (i.e. turn the power on).

Continue to press the buttons until [

ADJUSTMENT

UNLOCKED

] appears on the screen. The lock is

released when the message is displayed.

Adjusting the backlight

1. Without the OSD Menu being displayed, press

the

or the button.

2. Check that [BRIGHT] is selected.

If it is not selected, press the / MODE button

and select [BRIGHT].

3. Adjust by pressing the button (darker) or

button (lighter).

Note:

- On Screen display for adjustment disappears

several seconds after the last operation.

For analog signal

1.First perform an automatic adjustment. (p.19)

2.Perform manual adjustment where necessary.

(p.20)

For digital signal [LL-171G]

The monitor can generally be used without

adjustment. If necessary perform manual

adjustment. (p.20)

Note:

- All adjustments will be saved even after turning

the power off.

Resetting all adjustment values

All adjustment values can be returned to their

original ex-factory values in one command.

1. Turn off the monitor power.

2. Press the MENU button and the / MODE

button simultaneously, and while doing this

press the power button (i.e. turn the power on).

Continue to press the buttons until [ALL RESET]

appears on the screen. Reset is complete when

the displayed message disappears.

Notes:

- While [ALL RESET] is displayed, the control

buttons are disabled.

- It is not possible to reset values when the

adjustment lock is in place. Remove the

adjustment lock before attempting to operate

control buttons.

ADJUSTMENT Menu reset

Settings of items in the ADJUSTMENT Menu

(CLOCK, PHASE, H-POS, V-POS) can be returned

to their original ex-factory values.

1. Turn on the monitor power.

2. Press the MENU button and the

button

simultaneously. When [RESET] appears on the

screen, the reset is complete.

Notes:

- While [RESET] is displayed, the control buttons

are disabled.

- It is not possible to reset values when the

adjustment lock is in place. Remove the

adjustment lock before attempting to operate

control buttons.

171AG_gb.P65 12/4/2003, 1:14 PM17

Adjusting the speaker volume

1. Without the OSD Menu being displayed, press

the

or the button.

2. Check that [VOLUME] is selected.

If it is not selected, press the / MODE button

and select [VOLUME].

3. Adjust by pressing the button (decrease) or

button (increase).

Note:

- On Screen display for adjustment disappears

several seconds after the last operation.

Adjusting the screen display and speaker volume

Setting display mode

Color tone or brightness can be changed with one

command.

STD

Displays image with the color tone results from

original scheme of liquid crystal panel.

OFFICE

Display brightness is lowered. (This mode saves

power.)

sRGB

sRGB is international standard of color

representation specified by IEC (International

Electrotechnical Commission).

Color conversion is made in taking account of

liquid crystal's characteristics and represents

color tone close to its original image.

VIVID

Displays an image with dynamic and vivid

primary colors.

- If [DISPLAY MODE] is set to [sRGB] or [VIVID],

[WHITE BALANCE] is set to [STD], and [GAMMA]

is set to [0].

How to set

Press the / MODE button when the OSD Menu is

not displayed.

Each time the button is pressed the next menu

item appears. (STD → OFFICE → sRGB → VIVID

→ STD)

On Screen display for adjustment disappears

several seconds after the last operation.

Checking product information

A model name (MODEL), a serial no. (S/N), and

usage time (USAGE TIME) of the monitor can be

checked.

1.Turn the power off.

2.While pressing the / MODE button, press the

monitor's power button (i.e. turn the power on).

The product information will display.

3.Press the MENU button.

Note:

- Please note that the indication of usage time at

purchase may not be 0 (zero), as a result of

factory inspection and other activities during

manufacture.

171AG_gb.P65 12/4/2003, 1:14 PM18

EnglishDeutschFrançaisItalianoEspañolEnglish

Adjusting the screen display

Adjusting the screen automatically

Automatic adjustment can be performed using

either the AUTO button or the MENU button.

AUTO button [LL-171A]

1.Press the AUTO button.

2.Press the AUTO button again.

[ADJUSTING] will appear on the screen, and

after a few seconds [ADJUSTING] will disappear.

(The automatic adjustment is now complete.)

MENU button

1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

(Example: Displayed screen of the LL-171G)

2.Press the button.

The screen will become dark and [ADJUSTING]

will be displayed. After a few seconds the

ADJUSTMENT Menu will return. (The automatic

adjustment is now complete.)

3. Press the MENU button 5 times to make the OSD

(On Screen Display) Menu disappear.

Notes:

- In most cases automatic adjustment is sufficient.

- It may not be possible to achieve correct

adjustment with the first automatic adjustment. In

such a case, try repeating the automatic

adjustment 2 or 3 times.

- If necessary due to any of the following, manual

adjustments (p.20) can be performed after the

automatic adjustment.

- When further fine adjustment is needed.

- When [OUT OF ADJUST] is displayed. (When

the screen displays an entirely dark image, the

automatic screen adjustment may be disabled.

When making an automatic adjustment, be

sure to either use the Adjustment Pattern or try

displaying an image that makes the entire

screen very bright.)

- When the computer's video input signals are

Composite Sync or Sync on Green. (Automatic

adjustments may not be possible.)

- Automatic adjustment may not be achieved

correctly depending on what is displayed on the

screen - moving pictures or the MS-DOS prompt

etc.

Automatic screen adjustment

(When using an analog signal)

Options in the ADJUSTMENT Menu can be

adjusted automatically (CLOCK, PHASE, H-POS,

V-POS).

Notes:

- When setting up this monitor for the first time or

after having changed an aspect of the current

system, perform an automatic screen adjustment

before use.

- Automatic screen adjustment is unnecessary

when the LL-171G is used with a digital

connection. Perform manual screen adjustment

when necessary. (p.20)

Screen display for adjustment

First display an image that makes the entire

screen light.

If you are using Windows, you can use the

Adjustment Pattern on the accompanying CD-

ROM.

Opening the Adjustment Pattern (for Windows)

This explanation is for Windows 95/98/2000/Me/

XP, and assumes that the CD-ROM drive is "D"

drive.

1.Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2.Open [My Computer] and select CD-ROM. If

using Windows 3.1, open [File Manager] and

choose "D" drive.

3.Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will

appear.

Adjustment Pattern

After completing the adjustments, press the

computer's [Esc] key to exit the Adjustment

Program.

Note:

- If your computer's display mode is set to 65K

colors, you may see the different color levels in

each color pattern or the gray scale may look

colored. (This is due to the specification of the

input signal and is not a malfunction.)

171AG_gb.P65 12/4/2003, 1:14 PM19

ADJUSTMENT Menu

When the LL-171G is used with a digital

connection, this menu adjustment is not

necessary.

AUTO

When [AUTO] is selected with the button, the

[CLOCK], [PHASE], [H-POS] and [V-POS] settings

are automatically adjusted.

CLOCK

The figure below demonstrates how to adjust so

that vertical flicker noise is not emitted.

(

buttons)

PHASE

The figure below demonstrates how to adjust so

that horizontal flicker noise is not emitted.

(

buttons)

Note:

- Adjustments to [PHASE] should be made only

after [CLOCK] has been correctly set.

H-POS (horizontal positioning) and V-POS

(vertical positioning)

To center the Adjustment Pattern within the

boundaries of the screen, adjust the left-right (H-

POS) values and the up-down (V-POS) values.

(

buttons)

Manual screen adjustment

1.Display an image that makes the entire screen

light. (p.19)

2. Display the OSD Menu by pressing the MENU

button.

(Example: Displayed screen of the LL-171G)

ADJUSTMENT Menu

GAIN CONTROL Menu

COLOR CONTROL Menu

MODE SELECT-1 Menu

MODE SELECT-2 Menu

The OSD Menu closes.

Notes:

- When the LL-171G is used with a digital

connection, ADJUSTMENT and GAIN

CONTROL Menu adjustments are not necessary.

- The OSD Menu automatically disappears

approximately 30 seconds after the last command.

- This chapter provides the procedure how to

adjust the screen by using Adjustment Pattern

(for Windows).

Adjusting the screen display

Screen frame

Vertical flicker noise

Horizontal flicker noise

Adjustment

Pattern

Select the

option by

pressing the

/ MODE

button.

Select the

option by

pressing the

/ MODE

button.

Select the

option by

pressing the

/ MODE

button.

Select the

option by

pressing the

/ MODE

button.

Select the

option by

pressing the

/ MODE

button.

171AG_gb.P65 12/4/2003, 1:14 PM20

La pagina sta caricando ...

Sharp LL-171A LL-171G Manuale utente

Marca: Sharp

Modello: LL-171A LL-171G

Categoria: TV

Tipo: Manuale utente

Questo manuale è adatto anche per

LL-171A/171G

Scarica il pdf

rapporto

in altre lingue

English: Sharp LL-171A LL-171G User manual
français: Sharp LL-171A LL-171G Manuel utilisateur
español: Sharp LL-171A LL-171G Manual de usuario
Deutsch: Sharp LL-171A LL-171G Benutzerhandbuch

Documenti correlati

Altri documenti

Xiaomi 6934177720543 Curved Gaming Monitor 34 Manuale utente