Roland MA-7ACW Manuale del proprietario

Categoria
Altoparlanti
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (pp. 3–4), and “IMPORTANT
NOTES” (p. 5). These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, Owner’s manual should be
read in its entirety. The manual should be saved and kept on hand as a convenient
reference.
202
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manuale d’uso
Manual del usuario
MA-7A_egfis.fm 1 ページ 2007年2月2日 金曜日 午前11時2分
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL
LIVE
For the U.K.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
MA-7A_egfis.fm 2 ページ 2007年2月2日 金曜日 午前11時2分
3
USING THE UNIT SAFELY
001
Before using this unit, make sure to read the instructions
below, and the Owner’s Manual.
..........................................................................................................
002a
Do not open or perform any internal modifications on the
unit.
..........................................................................................................
003
Do not attempt to repair the unit, or replace parts within
it (except when this manual provides specific instruc-
tions directing you to do so). Refer all servicing to your
retailer, the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
..........................................................................................................
004
Never use or store the unit in places that are:
Subject to temperature extremes (e.g., direct sunlight
in an enclosed vehicle, near a heating duct, on top of
heat-generating equipment); or are
Damp (e.g., baths, washrooms, on wet floors); or are
Humid; or are
Exposed to rain; or are
Dusty; or are
Subject to high levels of vibration.
..........................................................................................................
007
Make sure you always have the unit placed so it is level
and sure to remain stable. Never place it on stands that
could wobble, or on inclined surfaces.
..........................................................................................................
008a
The unit should be connected to a power supply only of
the type described in the operating instructions, or as
marked on the rear side of unit.
..........................................................................................................
008e
Use only the attached power-supply cord. Also, the
supplied power cord must not be used with any other
device.
..........................................................................................................
009
Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits. Damaged
cords are fire and shock hazards!
..........................................................................................................
010
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a high
volume level, or at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should immediately
stop using the unit, and consult an audiologist.
..........................................................................................................
011
Do not allow any objects (e.g., flammable material, coins,
pins); or liquids of any kind (water, soft drinks, etc.) to
penetrate the unit.
..........................................................................................................
012a
Immediately turn off the STANDBY Switch, remove the
power cord from the outlet, and request servicing by
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Information”
page when:
The power-supply cord or the plug has been damaged; or
If smoke or unusual odor occurs
Objects have fallen into, or liquid has been spilled onto the
unit; or
The unit has been exposed to rain (or otherwise has become
wet); or
The unit does not appear to operate normally or exhibits a
marked change in performance.
..........................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
MA-7A_egfis.fm 3 ページ 2007年2月2日 金曜日 午前11時2分
4
013
In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe operation of
the unit.
..........................................................................................................
014
Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
015
Do not force the unit’s power-supply cord to share an
outlet with an unreasonable number of other devices. Be
especially careful when using extension cords—the total
power used by all devices you have connected to the extension
cord’s outlet must never exceed the power rating (watts/
amperes) for the extension cord. Excessive loads can cause the
insulation on the cord to heat up and eventually melt through.
..........................................................................................................
016
Before using the unit in a foreign country, consult with
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Infor-
mation” page.
..........................................................................................................
026
Do not put anything that contains water (e.g., flower
vases) on this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the
unit. Swiftly wipe away any liquid that spills on the unit using a
dry, soft cloth.
..........................................................................................................
101a
The unit should be located so that its location or position
does not interfere with its proper ventilation.
..........................................................................................................
102b
Always grasp only the plug on the power-supply cord
when plugging into, or unplugging from, an outlet or
this unit.
..........................................................................................................
103a
At regular intervals, you should unplug the power plug
and clean it by using a dry cloth to wipe all dust and
other accumulations away from its prongs. Also,
disconnect the power plug from the power outlet whenever the
unit is to remain unused for an extended period of time. Any
accumulation of dust between the power plug and the power
outlet can result in poor insulation and lead to fire.
..........................................................................................................
104
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed so
they are out of the reach of children.
..........................................................................................................
106
Never climb on top of, nor place heavy objects on the
unit.
..........................................................................................................
107b
Never handle the power cord or its plugs with wet hands
when plugging into, or unplugging from, an outlet or
this unit.
..........................................................................................................
108a
Before moving the unit, disconnect the power plug from
the outlet, and pull out all cords from external devices.
..........................................................................................................
109a
Before cleaning the unit, turn off the STANDBY Switch
and unplug the power cord from the outlet.
..........................................................................................................
110a
Whenever you suspect the possibility of lightning in
your area, pull the plug on the power cord out of the
outlet.
..........................................................................................................
118b
Keep the included rubber feet in a safe place out of
children’s reach, so there is no chance of them being
swallowed accidentally.
..........................................................................................................
119
The rear panel may become hot, so take care to avoid
burns.
..........................................................................................................
121
Do not remove the speaker grille and speaker by any
means. Speaker not user replaceable. Shock hazardous
voltages and currents are present inside the enclosure.
..........................................................................................................
MA-7A_egfis.fm 4 ページ 2007年2月2日 金曜日 午前11時2分
5
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages
2–4, please read and observe the following:
Power Supply
301
Do not connect this unit to same electrical outlet that is being
used by an electrical appliance that is controlled by an inverter
(such as a refrigerator, washing machine, microwave oven, or air
conditioner), or that contains a motor. Depending on the way in
which the electrical appliance is used, power supply noise may
cause this unit to malfunction or may produce audible noise. If it
is not practical to use a separate electrical outlet, connect a power
supply noise filter between this unit and the electrical outlet.
307
Before connecting this unit to other devices, turn off the power to
all units. This will help prevent malfunctions and/or damage to
speakers or other devices.
308
Although the LED is switched off when the STANDBY Switch is
switched off, this does not mean that the unit has been
completely disconnected from the source of power. If you need to
turn off the power completely, first turn off the STANDBY
Switch, then unplug the power cord from the power outlet. For
this reason, the outlet into which you choose to connect the
power cord’s plug should be one that is within easy reach and
readily accessible.
Placement
351
Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum. To
alleviate the problem, change the orientation of this unit; or move
it farther away from the source of interference.
352a
This device may interfere with radio and television reception. Do
not use this device in the vicinity of such receivers.
352b
Noise may be produced if wireless communications devices, such
as cell phones, are operated in the vicinity of this unit. Such noise
could occur when receiving or initiating a call, or while
conversing. Should you experience such problems, you should
relocate such wireless devices so they are at a greater distance
from this unit, or switch them off.
354b
Do not expose the unit to direct sunlight, place it near devices
that radiate heat, leave it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Also, do not allow lighting
devices that normally are used while their light source is very
close to the unit (such as a piano light), or powerful spotlights to
shine upon the same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
355b
When moved from one location to another where the temper-
ature and/or humidity is very different, water droplets (conden-
sation) may form inside the unit. Damage or malfunction may
result if you attempt to use the unit in this condition. Therefore,
before using the unit, you must allow it to stand for several
hours, until the condensation has completely evaporated.
356
Do not allow rubber, vinyl, or similar materials to remain on the
unit for long periods of time. Such objects can discolor or
otherwise harmfully affect the finish.
359
Do not paste stickers, decals, or the like to this instrument.
Peeling such matter off the instrument may damage the exterior
finish.
360
Depending on the material and temperature of the surface on
which you place the unit, its rubber feet may discolor or mar the
surface.
You can place a piece of felt or cloth under the rubber feet to
prevent this from happening. If you do so, please make sure that
the unit will not slip or move accidentally.
Maintenance
401b
To clean the unit, use a dry, soft cloth; or one that is slightly
dampened. Try to wipe the entire surface using an equal amount
of strength, moving the cloth along with the grain of the wood.
Rubbing too hard in the same area can damage the finish.
402
Never use benzine, thinners, alcohol or solvents of any kind, to
avoid the possibility of discoloration and/or deformation.
Additional Precautions
553
Use a reasonable amount of care when using the unit’s buttons,
sliders, or other controls; and when using its jacks and
connectors. Rough handling can lead to malfunctions.
556
When connecting / disconnecting all cables, grasp the connector
itself—never pull on the cable. This way you will avoid causing
shorts, or damage to the cable’s internal elements.
557
A small amount of heat will radiate from the unit during normal
operation.
558a
To avoid disturbing your neighbors, try to keep the unit’s volume
at reasonable levels. You may prefer to use headphones, so you
do not need to be concerned about those around you (especially
when it is late at night).
559a
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise, you
will need to use equivalent packaging materials.
562
Some connection cables contain resistors. Do not use cables that
incorporate resistors for connecting to this unit. The use of such
cables can cause the sound level to be extremely low, or impos-
sible to hear. For information on cable specifications, contact the
manufacturer of the cable.
Add
Be sure to avoid
inserting your fingers
in the bass reflex ports
when transporting or
moving the speakers,
as your fingers may
become wedged and
stuck in the ports.
MA-7A_egfis.fm 5 ページ 2007年2月2日 金曜日 午前11時2分
6
Panel Description
Left Channel
fig.2
Left Channel
1.
L Channel Input Jack
Connect this to L Channel Output Jack
14
on the right-
side unit. For the connection, use the included speaker
cable.
Right Channel
2.
STANDBY Switch
3.
STANDBY Indicator
When the STANDBY Switch is turned on, the STANDBY
Indicator lights, indicating that the unit is ready to
produce sound.
4.
PHONES Jack
When you connect headphones to this jack, no sound
will be heard from the speakers.
5.
VOLUME Knob
This adjusts the volume of devices connected to LINE
Input Jack
9
, LINE 1 Input Jack
11
, and LINE 2 Input
Jacks
12
.
6.
BASS ENHANCER Indicator
This lights when the BASS ENHANCER Switch
7
is
pressed to turn the function on.
7.
BASS Control Knob
BASS ENHANCER Switch
Switch this on to boost the bass range.
The BASS ENHANCER Indicator lights when this is
turned on.
With the switch in the OFF position, sounds are output
without the effect applied.
Right Channel
fig.3
8.
TREBLE Control Knob
These adjust the tones of the bass and treble. Set to center
to make the tones flat.
9.
LINE Input Jack (stereo mini type)
The signals from both inputs are mixed when devices are
connected simultaneously to the LINE 1 Input Jack
11
and LINE 2 Input Jacks
12
on the rear panel.
10.
AC Inlet
Connect the included Power cord here (p. 17). Plug it
firmly in, so that the cable does not accidentally become
disconnected.
11.
LINE 1 Input Jack (stereo mini type)
The signals from both inputs are mixed when devices are
connected simultaneously to the front panel’s LINE
Input Jack
9
and the rear panel’s LINE 2 Input Jacks
12
.
12.
LINE 2 Input Jacks (L, R) (RCA phono type)
The signals from both inputs are mixed when devices are
connected simultaneously to the front panel’s LINE
Input Jack
9
and the rear panel’s LINE 1 Input Jack
11
.
13.
SUB-WOOFER Output Jack
Connect your sub-woofer here. Obtain separately any
sub-woofer you wish to connect and use.
14.
L Channel Output Jack
Connect this to L Channel Input Jack
1
on the left-side
unit.
1
234 56 7 8
10 11 12 13 14
9
MA-7A_egfis.fm 6 ページ 2007年2月2日 金曜日 午前11時2分
7
Español Italiano Français Deutsch English
Connections
Attaching the Rubber Feet
(Included)
Precautions Concerning
Connections and Initial Use
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
926a modify
Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not
contain a resistor.
941
Once the connections have been properly completed, be sure to
use the steps described below to turn on the STANDBY Switch.
Turning on STANDBY in the wrong order risks malfunction
and/or damage to speakers and other devices (reverse the
procedure when turning off the STANDBY Switch).
< Connected devices
MA-7A>
942
This unit is equipped with a circuitry protection feature. A few
moments are required after the STANDBY Switch is turned on
before the unit is ready for normal operation.
945
If you need to turn off the power completely, first turn off the
STANDBY Switch, then unplug the power cord from the power
outlet. Refer to
Power Supply
(p. 5).
Connection Example
OUTPUT
(TO LEFT)
INPUT
(FROM RIGHT)
Sound Module, CD Player, MD Player, etc. (LINE OUT)
Rear Panel
MA-7A_egfis.fm 7 ページ 2007年2月2日 金曜日 午前11時2分
8
Bedienfeldbeschreibung
Linker Kanal
s
Linker Kanal
1.
L-Kanal-Eingangsbuchse
Verbinden Sie diese Buchse mit der L-Kanal-
Ausgangsbuchse
14
der Einheit auf der rechten Seite.
Verwenden Sie für den Anschluss das beiliegende
Lautsprecherkabel.
Rechter Kanal
2.
STANDBY-Schalter
3.
STANDBY-Anzeige
Die STANDBY-Anzeige leuchtet auf, wenn der
STANDBY-Schalter eingeschaltet ist und die Lautsprecher
zur Tonausgabe bereit sind.
4.
PHONES-Buchse
Wenn Sie an diese Buchse Kopfhörer anschließen, hören
Sie keinen Sound aus den Lautsprechern.
5.
VOLUME-Schaltknopf
Stellt die Lautstärke der Geräte ein, die an den LINE-
Eingangsbuchsen
9
, an den LINE 1-Eingangsbuchsen
11
und der LINE 2-Eingangsbuchse
12
angeschlossen sind.
6.
BASS ENHANCER-Anzeige
Leuchtet auf, wenn der BASS ENHANCER-Schalter
7
gedrückt wird, um die Funktion einzuschalten.
7.
BASS-Drehknopf
BASS ENHANCER-Schalter
Einschalten, um den Tiefenbereich anzuheben.
Die BASS ENHANCER-Anzeige leuchtet auf, wenn dies
eingeschaltet ist.
Wenn dieser Schalter auf OFF steht, wird Ton ohne
angelegten Effekt ausgegeben.
Rechter Kanal
f
8.
TREBLE-Drehknopf
Mit diesen Bedienelementen werden Bass und Treble
reguliert. Drehen Sie die Drehknöpfe bis zur Mitte, um
einen tiefen Ton zu erzeugen.
9.
LINE-Eingangsbuchse (Stereo-Minibuchse)
Eingangssignale werden gemischt, wenn Geräte
gleichzeitig an den LINE 1-Eingangsbuchsen
11
und die
LINE 2-Eingangsbuchsen
12
an der Rückseite
angeschlossen sind.
10.
AC-Einlass
Schließen Sie hier das beiliegende Netzkabel an (s. 17).
Stecken Sie das Kabel fest ein, damit es nicht versehentlich
vom Anschluss getrennt werden kann.
11.
LINE 1-Eingangsbuchse (Stereo-Minibuchse)
Eingangssignale werden gemischt, wenn Geräte
gleichzeitig an die LINE-Eingangsbuchse
9
an der
Vorderseite und die LINE 2-Eingangsbuchsen
12
an der
Rückseite angeschlossen sind.
12.
LINE 2-Eingangsbuchsen (L, R) (RCA-Cinchbuchsen)
Eingangssignale werden gemischt, wenn Geräte
gleichzeitig an die LINE-Eingangsbuchse
9
an der
Vorderseite und die LINE 1-Eingangsbuchse
11
an der
Rückseite angeschlossen sind.
13.
SUB-WOOFER-Ausgangsbuchse
Schließen Sie hier Ihren Subwoofer an. Geeignete
Subwoofer sind im Fachhandel erhältlich.
14.
L-Kanal-Ausgangsbuchse
Verbinden Sie diese Buchse mit der L-Kanal-
Eingangsbuchse
1
der Einheit auf der linken Seite.
1
234 56 7 8
10 11 12 13 14
9
MA-7A_egfis.fm 8 ページ 2007年2月2日 金曜日 午前11時2分
9
Español Italiano Français Deutsch English
Anschlüsse
Anschliessen der
Gummibeine (in der Packung)
Vorsichtsmaßregeln zum
Hinweis für Anschluss und
erste Verwendung
921
Um Fehlfunktionen und/oder Schäden an Lautsprechern oder
anderen Geräten zu verhindern, reduzieren Sie stets die
Lautstärke und schalten alle Geräte ab, bevor Sie die Verbind-
ungen einrichten.
926a modify
Die Verwendung von Anschlusskabeln mit Widerstand kann der
Grund für eine zu geringe Lautstärke sein. Verwenden Sie ein
Anschlusskabel, das keinen Widerstand enthält.
941
Wenn die Verbindungen richtig hergestellt sind, befolgen Sie
immer die folgenden Schritte beim Einschalten des STANDBY-
Schalters. Bei Einschalten von STANDBY in der falschen Reihen-
folge besteht die Gefahr von Fehlfunktion und/oder Schäden an
Lautsprechern und anderen Bauteilen (umgekehrte Reihenfolge
der Schritte des Ausschaltens des STANDBY-Schalters).
< Angeschlossene Geräte
MA-7A>
942
Dieses Gerät ist mit einer Schutzschaltung versehen. Ein kurzer
Intervall ist nach dem Einschalten mit dem STANDBY-Schalter
erforderlich, bevor das Gerät normal arbeitet.
Anschluss-Beispiel
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Soundmodul, CD-Player, MD-Gerät, etc. (LINE OUT)
Rückseite
MA-7A_egfis.fm 9 ページ 2007年2月2日 金曜日 午前11時2分
10
Description
Canal gauche
Canal gauche
1.
Prise d’entrée canal L (G)
Connectez à la prise de sortie du canal L
14
sur la droite
de l’appareil. Pour la connexion, utilisez le câble pour
enceintes inclus.
Canal droit
2.
Commutateur STANDBY
3.
Témoin STANDBY
Le témoin STANDBY s’allume lorsque l’interrupteur
STANDBY est sous tension et que les haut-parleurs sont
prêts à émettre des sons.
4.
Prise PHONES (casque)
Si vous reliez un casque à cette prise, le son ne passera
plus sur les enceintes.
5.
Bouton VOLUME
Ce bouton ajuste le volume des périphériques connectés
aux connecteurs suivants : LINE INPUT Jack
9
, LINE 1
Input jack
11
et LINE 2 input jacks
12
6.
Témoin BASS ENHANCER (accentuation des graves)
Ce témoin s’allume lorsque le commutateur
d’accentuation des graves
7
est enfoncé pour activer la
fonction.
7.
Bouton BASS
Commutateur d’accentuation des graves
Mettre ce commutateur à « On » pour accentuer la plage
des graves.
Le témoin BASS ENHANCER (accentuation des graves)
s’allume lorsque ce bouton est placé en position de
marche.
Si le commutateur est en position « Off », les sons sont
produits sans cet effet.
Canal droit
8.
Bouton TREBLE
Ils servent à régler les basses et les aiguës. Pour obtenir
un réglage neutre, mettre les boutons en position
médiane.
9.
LINE Input Jack (prise d’entrée, type mini stéréo)
Les signaux d’entrée se mélangent lorsque les
périphériques sont connectés aux prises LINE 1 Input
jack
11
et LINE 2 input jacks
12
du panneau arrière.
10.
Connecteur AC IN
Branchez ici le cordon d’alimentation (p. 17). Enfichez-le
fermement, pour éviter que le cordon ne soit déconnecté
par accident.
11.
LINE 1 Input Jack (prise d’entrée, type mini stéréo)
Les signaux d’entrée se mélangent lorsque les
périphériques sont connectés aux prises LINE Input Jack
9
et LINE 2 input jacks
12
.
12.
LINE 2 Input jacks (prises d’entrée, G, D, type RCA
phono)
Les signaux d’entrée se mélangent lorsque les
périphériques sont connectés à la prise LINE Input Jack
9
du panneau avant et à la prise LINE 1 input jack
11
du panneau arrière.
13.
Jack de sortie du caisson de basse (sub-woofer)
Connecter le caisson de basse ici. Se procurer séparément
le caisson de basse désiré, le connecter et l’utiliser.
14.
Prise de sortie canal L (G)
Connectez à la prise de sortie du canal L
1
sur la gauche
de l’appareil.
1
234 56 7 8
10 11 12 13 14
9
MA-7A_egfis.fm 10 ページ 2007年2月2日 金曜日 午前11時2分
11
Español Italiano Français Deutsch English
Connexions
Fixer les pieds en caoutchouc
(inclus)
Précautions à prendre pour
la connexion et la première
utilisation
921
Afin d’éviter un mauvais fonctionnement et/ou d’endommager
les enceintes et autres périphériques, diminuez toujours le
volume et mettez toujours les périphériques hors tension avant
d’effectuer une connexion.
926 modify
L’utilisation d’un câble à résistance peut entraîner une perte de
niveau sonore. Utilisez des câbles ne contenant pas de résistance.
941
Une fois les connexions terminées, s’assurer de suivre les étapes
ci-dessus pour mettre l’interrupteur STANDBY sous tension. Si
l’interrupteur STANDBY mis sous tension dans le mauvais ordre,
les haut-parleurs et d’autres périphériques peuvent tomber en
panne ou être endommagés (suivre la procédure inverse pour
éteindre l’interrupteur STANDBY).
< Appareils connectés
MA-7A >
942
Cet appareil est muni d’une protection de circuit. Il s’écoule un
bref délai entre le moment où l’interrupteur STANDBY est mis
sous tension et celui où il commence à fonctionner.
Exemple de connexion
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Face arrière
Module de sons, Lecteur CD, Lecteur MD, etc. (LINE OUT)
MA-7A_egfis.fm 11 ページ 2007年2月2日 金曜日 午前11時2分
12
Descrizione del pannello
Canale sinistro
fig.2
Canale sinistro
1.
Presa d’ingresso canale sinistro
Collegare alla presa d’uscita del canale sinistro
14
sul
lato destro dell’apparecchio. Per effettuare il
collegamento, utilizzare il cavo per altoparlanti in
dotazione.
Canale destro
2.
Interruttore STANDBY
3.
Indicatore STANDBY
L’indicatore STANDBY si accende quando l’interruttore
STANDBY è acceso e gli altoparlanti sono pronti a
riprodurre il suono..
4.
Presa PHONES
Se si collegano le cuffie a questa presa, non verrà emesso
alcun suono dagli altoparlanti.
5.
Manopola VOLUME
Questo regola il volume dei sistemi collegati alla LINE
presa di entrata
9
, LINE 1 presa di entrata
11
, e LINE 2
presa di entrata
12
.
6.
Indicatore del POTENZIATORE DEL BASSO
Questo si illumina quando l’interruttore
7
del
POTENZIATORE DEL BASSO viene premuto.
7.
Manopola BASS
Interruttore BASS ENHANCER (esaltazione dei bassi)
Muovere l’interruttore per potenziare le frequenze dei
bassi.
L’indicatore del POTENZIATORE DEL BASSO si
illumina quando questo viene acceso.
Quando l’interruttore è in posizione OFF, il suono in
uscita non presenta l’effetto potenziato dei bassi.
Canale destro
fig.3
8.
Manopola TREBLE
Regolano i bassi e gli acuti. Regolare al centro per
uniformare il suono.
9.
Presa di ingresso LINE (tipo mini stereo)
I segnali di entrata sono mischiati quando i sistemi sono
collegati simultaneamente al pannello posteriore LINE 1
presa di entrata
11
e LINE 2 Prese di entrata
12
.
10.
Presa AC
Collegare a questa presa il cavo di alimentazione in
dotazione (p. 17). Inserirlo a fondo per evitare che si
scolleghi accidentalmente.
11.
Presa di entrata LINE 1 (tipo mini stereo)
I segnali di entrata sono mischiati quando i sistemi sono
connessi simultaneamente al pannello anteriore presa di
ingresso LINE
9
e pannello posteriore LINE 2 prese di
entrata
12
.
12.
LINE 2 Prese di entrata (L, R) (RCA tipo fono)
I segnali di entrata sono miscelati quando i sistemi sono
connessi simultaneamente al pannello anteriore LINE
presa di entrata
9
e pannello posteriore LINE 1 presa di
entrata
11
.
13.
Uscita SUBWOOFER
Per il collegamento del subwoofer. È possibile collegare e
utilizzare qualsiasi subwoofer acquistato separatamente.
14.
Presa d’uscita canale sinistro
Collegare alla presa d’ingresso del canale sinistro
1
sul
lato sinistro dell’apparecchio.
1
234 56 7 8
10 11 12 13 14
9
MA-7A_egfis.fm 12 ページ 2007年2月2日 金曜日 午前11時2分
13
Español Italiano Français Deutsch English
Collegamenti
Montare i Piedini in Gomma
(Inclusi)
Prestare attenzione alla nota
per la connessione e
l’utilizzo iniziale
921
Per evitare malfunzionamenti e/o danni ai diffusori o ad altri
dispositivi, abbassare sempre il volume e accertarsi che tutti gli
apparecchi non siano alimentati prima di effettuare i collega-
menti.
926 modify
L’uso di un cavo provvisto di un resistore potrebbe risultare in un
livello audio basso. Utilizzare un cavo di collegamento senza
resistore.
941
Una volta che le connessioni sono state adeguatamente
completate, assicurarsi di utilizzare i punti descritti di seguito per
accendere l’interruttore STANDBY. Accendendo l’interruttore
STANDBY nell’ordine errato si rischia di causare il malfunziona-
mento e/o di danneggiare gli altoparlanti e altri sistemi (invertire
la procedura quando si spegne l’interruttore STANDBY).
< Dispositivi collegati
MA-7A>
942
Questa unità è provvista di un circuito di protezione. È richiesto
un breve intervallo dopo che l’interruttore
Esemp io di collegamenti
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Pannello posteriore
Modulo sonoro, lettore CD, lettore MD, ecc. (LINE OUT)
MA-7A_egfis.fm 13 ページ 2007年2月2日 金曜日 午前11時2分
14
Descripción del panel
Canal izquierdo
fig.2
Canal izquierdo
1.
Jack de entrada del canal izquierdo
Conéctelo al jack de salida del canal izquierdo
14
que se
encuentra en el lado derecho de la unidad. Para la
conexión, utilice el cable del altavoz que viene incluido.
Canal derecho
2.
Interruptor STANDBY
3.
Indicador STANDBY
El indicador de STANDBY se ilumina cuando se
enciende el interruptor STANDBY y los altavoces están
listos para emitir sonidos.
4.
Jack de los auriculares
Cuando conecte los auriculares a este jack, los altavoces
no emitirán ningún sonido.
5.
Control VOLUME
Esto ajusta el volumen de los dispositivos conectados a
la toma de entrada
9
LINE, toma de entrada
11
LINE 1,
y tomas de entrada
12
LINE 2.
6.
Indicador BASS ENHANCER
Esto se enciende cuando el interruptor
7
BASS
ENHANCER se presiona para encender la función.
7.
Control BASS
Interruptor REFORZADOR DE TONOS GRAVES
Active para aumentar el rango de tonos graves.
El indicador BASS ENHANCER se ilumina cuando esto
se enciende.
Con el interruptor en la posición OFF (apagado), los
sonidos se crean sin aplicar el efecto.
Canal derecho
fig.3
8.
Control TREBLE
Estos botones ajustan el tono de los bajos y los agudos.
Cóloquelos en el centro para que los tonos queden
nivelados.
9.
Toma de entrada LINE (tipo estéreo mini)
Señales de entrada se mezclan cuando los dispositivos se
conectan simultáneamente a la toma de entrada
11
LINE 1 y a las tomas de entrada
12
LINE 2 del panel
trasero.
10.
Entrada CA
Conecte aquí el cable de alimentación (Paginas 17).
Enchúfelo de modo que el cable no se pueda desconectar
accidentalmente.
11.
Toma de entrada LINE 1 (tipo estéreo mini)
Las señales de entrada se mezclan cuando los
dispositivos se conectan simultáneamente a la toma de
entrada
9
LINE del panel delantero y a las tomas de
entrada
12
LINE 2 del panel trasero.
12.
Tomas de entrada LINE 2 (I, D) (tipo RCA)
Las señales de entrada se mezclan cuando los
dispositivos se conectan simultáneamente a la toma de
entrada
9
LINE del panel delantero y a la toma de
entrada
11
LINE 1 del panel trasero.
13.
Conector de salida de SUB-WOOFER
Conecte aquí su sub-woofer. Obtenga por separado
cualquier sub-woofer que desee conectar y usar.
14.
Jack de salida del canal izquierdo
Conéctelo al jack de entrada del canal izquierdo
1
que se
encuentra en el lado izquierdo de la unidad.
1
234 56 7 8
10 11 12 13 14
9
MA-7A_egfis.fm 14 ページ 2007年2月2日 金曜日 午前11時2分
15
Español Italiano Français Deutsch English
Conexiones
Incluye los pies de goma Precauciones que deben
considerarse al conectar y
usar la unidad por primera
vez
921
Para evitar anomalías en el funcionamiento o daños en los
altavoces u otros aparatos, baje siempre el volumen y apague
todos los aparatos antes de realizar cualquier conexión.
926 modicar
Si utiliza un cable que posea un reostato, el nivel de sonido puede
bajar. Utilice un cable de conexión que no contenga un reostato.
941
Una vez que las conexiones se han completado adecuadamente,
asegúrese de seguir los pasos que se describen abajo para
encender el interruptor STANDBY. Apagar el interruptor
STANDBY en el orden incorrecto podría provocar mal funciona-
miento y/o daños en los altavoces y otros dispositivos (invierta el
procedimiento al apagar el interruptor STANDBY).
< Aparatos conectados
MA-7A>
942
Esta unidad está equipada con protección de circuitos. Se
requiere de un breve intervalo después de encender el interruptor
STANDBY antes de que la unidad empiece a funcionar.
Ejemplo de conexión
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Panel posterior
Módulo de sonido, reproductor de CD, reproductor de MD, etc. (LINE OUT)
MA-7A_egfis.fm 15 ページ 2007年2月2日 金曜日 午前11時2分
16
Specifications
Rated Power Output
14 W (7 W + 7 W)
Speaker Units
Woofer: 9 cm /
3-9/16” (Magnetically-Shielded)
Frequency Range
90 Hz to 20 kHz
Nominal Input Level
Line 1: -10 dBu
Line 2: -10 dBu
Input Impedance
20 k ohms
Controls
< R Channel >
BASS Control Knob (BASS ENHANCER Switch)
TREBLE Control Knob
VOLUME Knob
STANDBY Switch
Indicators
< R Channel>
STANDBY Indicator
Connectors
< R Channel >
Front: PHONES Jack (stereo mini type)
LINE Input Jack (stereo mini type)
Rear: LINE 1 Input Jack (stereo mini type)
LINE 2 Input Jacks (L, R) (RCA phono type)
L Channel Output Jack (RCA phono type)
SUB-WOOFER Output Jack (RCA phono type)
< L Channel >
Rear: L Channel Input Jack (RCA phono type)
Enclosure
Full-range Bass-reflex type (Wooden Cabinet)
Power Supply
AC 117 V, AC 220 V, AC 230 V or AC 240 V: 50/60 Hz
Current Consumption
22 W
Dimensions
< R Channel >
145.0 (W) x 194.2 (D) x 215.0 (H) mm
5-3/4 (W) x 7-11/16 (D) x 8-1/2 (H) inches
< L Channel >
145.0 (W) x 187.6 (D) x 215.0 (H) mm
5-3/4 (W) x 7-7/16 (D) x 8-1/2 (H) inches
Weight
< R Channel >
3.4 kg / 7 lbs 8 oz
< L Channel >
1.8 kg / 4 lbs
Accessories
Owner’s Manual
Speaker Cable (RCA phono type)
Conversion Cable: stereo mini to RCA phono (L/R)
Power Cord
Rubber Foot x 4
* 0 dBu = 0.775 V rms
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
MA-7A_egfis.fm 16 ページ 2007年2月2日 金曜日 午前11時2分
17
For 230 V (English)
This box contains continental and British power cables. Please select the correct type for your country.
Für 230 V (Deutsch)
Diese Packung beinhaltet europäische und britische Netzkabel. Bitte suchen Sie sich die richtige Variante für Ihr Land aus.
Pour 230 V (Français)
Cette boite contient des alimentations anglaises ou continentales. Merci de choisir l’alimentation appropriée de votre pays.
Per 230 V (Italiano)
La confezione contiene alimentatori con spina europea e Inglese. Scegliete quella adatta alla Vostra nazione.
Para 230 V (Español)
Esta caja contiene cables de corriente continentales y británicos. Por favor seleccione el tipo correcto para su país.
Application of AC230 V
Power Cord
for UK
except for UK
MA-7A_egfis.fm 17 ページ 2007年2月2日 金曜日 午前11時2分
MEMO
MA-7A_egfis.fm 18 ページ 2007年2月2日 金曜日 午前11時2分
19
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For EU Countries
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
NOTICE
AVIS
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For EU Countries
GR
SI
LV
LT
SK
CZ
EE
PL
HU
FI
SE
NO
DK
NL
PT
ES
IT
DE
FR
UK
MA-7A_egfis.fm 19 ページ 2007年2月2日 金曜日 午前11時2分
03903167 5J
As of November 1, 2006 (EDIROL-1)
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized
EDIROL/Roland distributor in your country as shown below.
EUROPE
EDIROL (Europe) Ltd.
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: +44 (0)20 8747 5949
FAX:+44 (0)20 8747 5948
http://www.edirol.com/europe
Deutschland
TEL: 0700 33 47 65 20
Italia
TEL: 02 93778329
CANADA
Roland Canada Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V6V 2M4 CANADA
TEL: (604) 270 6626
Roland Canada Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
TEL: (905) 362 9707
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
TEL: (323) 890 3700
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
SOUTH AFRICA
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: (021) 799 4900
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
TEL: (010) 6426-5050
HONG KONG
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
MALAYSIA/
SINGAPORE
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
PHILIPPINES
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
TEL: (02) 2561 3339
THAILAND
Theera Music Co. , Ltd.
330 Soi Verng NakornKasem,
New Road, Sumpantawongse,
Bangkok 10100, THAILAND
TEL: (02) 224-8821
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
BARBADOS
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
BRAZIL
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
TEL: (574)3812529
CURACAO
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:(305)5926866
DOMINICAN REPUBLIC
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TEL:(593-4)2302364
GUATEMALA
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
TEL:(502) 599-2888
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: (55) 5668-6699
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
TEL: (505)277-2557
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
Lima - Peru
TEL: (511) 4461388
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
ROLAND POLSKA SP. Z O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
TEL: (266) 364 609
RUSSIA
MuTek
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: (095) 981-4967
SLOVAKIA
DAN Acoustic s.r.o.
Povazská 18.
SK - 940 01 Nové Zámky
TEL: (035) 6424 330
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 493 91 00
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
UKRAINE
EURHYTHMICS Ltd.
P.O.Box: 37-a.
Nedecey Str. 30
UA - 89600 Mukachevo,
UKRAINE
TEL: (03131) 414-40
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
TRINIDAD
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868)638 6385
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa 1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CROATIA
ART-CENTAR
Degenova 3.
HR - 10000 Zagreb
TEL: (1) 466 8493
CZECH REP.
CZECH REPUBLIC
DISTRIBUTOR s.r.o
Voctárova 247/16
CZ - 180 00 PRAHA 8,
CZECH REP.
TEL: (2) 830 20270
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
GREECE/CYPRUS
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
TEL: (23) 511011
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 17 211 005
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha’aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
JORDAN
MUSIC HOUSE CO. LTD.
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192 JORDAN
TEL: (06) 5692696
KUWAIT
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
LEBANON
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 16-
5857
Beirut, LEBANON
TEL: (01) 20-1441
OMAN
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: 2478 3443
QATAR
Badie Studio & Stores
P.O. Box 62,
Doha, QATAR
TEL: 423554
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SYRIA
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.37
Beyoglu - Istanbul / TURKEY
TEL: (0212) 249 85 10
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
TEL: (04) 3360715
ASIA
AFRICA
AUSTRALIA/
NEW ZEALAND
EUROPE
CENTRAL/LATIN
AMERICA
NORTH AMERICA
MIDDLE EAST
MA-7A_egfis.fm 20 ページ 2007年2月2日 金曜日 午前11時2分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Roland MA-7ACW Manuale del proprietario

Categoria
Altoparlanti
Tipo
Manuale del proprietario
Questo manuale è adatto anche per