ASROCK P55 DELUXE3 Manuale del proprietario

11

1

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published January 2010

22

2

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

Motherboard LayoutMotherboard Layout

Motherboard Layout

1 PS2_USB_PWR1 Jumper 24 Chassis Intrusion Header (CI1)

2 Power Fan Connector (PWR_FAN1) 25 Reset Switch (RSTBTN)

3 ATX 12V Power Connector (ATX12V1) 26 Power Switch (PWRBTN)

4 1156-Pin CPU Socket 27 Dr. Debug (LED)

5 CPU Fan Connector (CPU_FAN1) 28 Power LED Header (PLED1)

6 2 x 240-pin DDR3 DIMM Slots 29 USB 2.0 Header (USB6_7, Blue)

(Dual Channel: DDR3_A2, DDR3_B2, Blue) 30 Infrared Module Header (IR1)

7 2 x 240-pin DDR3 DIMM Slots 31 USB 2.0 Header (USB4_5, Blue)

(Dual Channel: DDR3_A1, DDR3_B1, White) 32 USB 2.0 Header (USB8_9, Blue)

8 TPM Header (TPM1) 33 Clear CMOS Jumper (CLRCMOS1)

9 Chassis Fan Connector (CHA_FAN1) 34 Front Panel IEEE 1394 Header

10 ATX Power Connector (ATXPWR1) (FRONT_1394, White)

11 SATA3 Connector (SATA3_1, White) 35 COM Port Header (COM1)

12 SATA3 Connector (SATA3_2, White) 36 Floppy Connector (FLOPPY1)

13 Chassis Fan Connector (CHA_FAN2) 37 HDMI_SPDIF Header

14 Primary IDE Connector (IDE1, Blue) (HDMI_SPDIF1, White)

15 SATAII Connector (SATAII_2, Blue ) 38 Front Panel Audio Header

16 SATAII Connector (SATAII_1, Blue ) 39 Internal Audio Connector: CD1 (Black)

17 SATAII Connector (SATAII_4, Blue ) 40 PCI Slots (PCI1-2)

18 SATAII Connector (SATAII_3, Blue ) 41 PCI Express 2.0 x16 Slot (PCIE4, Blue)

19 16Mb SPI Flash 42 PCI Express 2.0 x1 Slot (PCIE3, White)

20 SATAII Connector (SATAII_5, Blue ) 43 Intel P55 Chipset

21 SATAII Connector (SATAII_6, Blue ) 44 PCI Express 2.0 x16 Slot (PCIE2, Blue)

22 Chassis Speaker Header (SPEAKER 1, White) 45 PCI Express 2.0 x1 Slot (PCIE1, White)

23 System Panel Header (PANEL1, White) 46 Chassis Fan Connector (CHA_FAN2)

33

3

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

I/O PI/O P

I/O P

anelanel

anel

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker

(No. 10) (No. 7) (No. 8) (No. 6)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 PS/2 Mouse Port (Green) ** 10 Front Speaker (Lime)

2 Coaxial SPDIF Out Port 11 Microphone (Pink)

3 USB 2.0 Port (USB12) 12 USB 3.0 Ports

4 IEEE 1394 Port (IEEE 1394) 13 USB 2.0 Ports (USB23)

* 5 LAN RJ-45 Port 14 USB 2.0 Ports (USB01)

6 Side Speaker (Gray) 15 Powered eSATAIII/USB 2.0 Connector

7 Rear Speaker (Black) 16 Optical SPDIF Out Port

8 Central / Bass (Orange) 17 Clear CMOS Switch (CLRCBTN)

9 Line In (Light Blue) 18 PS/2 Keyboard Port (Purple)

44

4

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on

your system. Please follow below instructions according to the OS you install.

For Windows

®

XP / XP 64-bit OS:

Please click “VIA HD Audio Deck” icon. Click “Jack” and then click “Configuration”. In

“Configuration” screen, please check the item “Independent Headphone”.

For Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS:

Please click “VIA HD Audio Deck” icon. Click “Advanced Options” on the right side on the

bottom. In “Advanced Options” screen, please check the item “Independent Headphone”.

55

5

ASRock P55 Deluxe3 Motherboard

1. Introduction1. Introduction

1. Introduction

Thank you for purchasing ASRock P55 Deluxe3 motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-step

installation guide. More detailed information of the motherboard can be found in the user

manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents1.1 Package Contents

1.1 Package Contents

ASRock P55 Deluxe3 Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

ASRock P55 Deluxe3 Quick Installation Guide

ASRock P55 Deluxe3 Support CD

1 x 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable

1 x Ribbon Cable for a 3.5-in Floppy Drive

4 x Serial ATA (SATA) Data Cables (Optional)

2 x Serial ATA (SATA) HDD Power Cables (Optional)

1 x I/O Panel Shield

1 x ASRock SLI_Bridge_2S Card

EnglishEnglish

English

66

6

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- All Solid Capacitor design (100% Japan-made high-quality

Conductive Polymer Capacitors)

CPU - Supports Intel

®

Core

TM

i7 / i5 / i3 and Pentium

®

G6950

Processors in LGA1156 Package

- Advanced V8 + 2 Power Phase Design

- Supports Intel

®

Turbo Boost Technology

- Supports Hyper-Threading Technology (see CAUTION 1)

- Supports Untied Overclocking Technology (see CAUTION 2)

- Supports EM64T CPU

Chipset - Intel

®

P55

Memory - Dual Channel DDR3 Memory Technology (see CAUTION 3)

- 4 x DDR3 DIMM slots

- Supports DDR3 2600+(OC)/2133(OC)/1866(OC)/1600/

1333/1066 non-ECC, un-buffered memory

- Max. capacity of system memory: 16GB (see CAUTION 4)

- Supports Intel

®

Extreme Memory Profile (XMP)

(see CAUTION 5)

Expansion Slot - 2 x PCI Express 2.0 x16 slots

(Single at x16 or Dual at x8/x8 mode)

- 2 x PCI Express 2.0 x1 slots (2.5GT/s)

- 2 x PCI slots

- Supports ATI

TM

CrossFireX

TM

and Quad CrossFireX

TM

- Supports NVIDIA

®

SLI

TM

and Quad SLI

TM

Audio - 7.1 CH HD Audio with Content Protection

- DAC with 110dB dynamic range (VIA

®

VT2020 Audio Codec)

- Premium Blu-ray audio support

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111DL

- Supports Wake-On-LAN

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Coaxial SPDIF Out Port

- 1 x Optical SPDIF Out Port

- 5 x Ready-to-Use USB 2.0 Ports

- 1 x Powered eSATAIII/USB 2.0 Connector

- 2 x Ready-to-Use USB 3.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

77

7

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

- 1 x IEEE 1394 Port

- 1 x Clear CMOS Switch with LED

- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/

Line in/Front Speaker/Microphone (see CAUTION 6)

SATA3 - 2 x SATA3 6.0Gb/s connectors by Marvell SE9128, support

hardware RAID (RAID 0 and RAID 1), NCQ, AHCI and “Hot

Plug” functions (SATA3_2 connector is shared with eSATA3

port)

USB3.0 - 2 x USB3.0 ports by NEC UPD720200, support USB 1.0/2.0/

3.0 up to 5Gb/s

Connector - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 10, RAID 5 and Intel Rapid Storage), NCQ,

AHCI and “Hot Plug” functions

- 2 x SATA3 6.0Gb/s connectors

- 1 x ATA133 IDE connector (supports 2 x IDE devices) (Please

use bundled 80-conductor IDE cable)

- 1 x Floppy connector

- 1 x IR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header

- 1 x TPM header

- 1 x Chassis Intrusion header

- 1 x Power LED header

- CPU/Chassis/Power FAN connector

- 24 pin ATX power connector

- 8 pin 12V power connector

- CD in header

- Front panel audio connector

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

(see CAUTION 7)

- 1 x Dr. Debug (7-Segment Debug LED)

Smart Switch - 1 x Clear CMOS Switch with LED

- 1 x Power Switch with LED

- 1 x Reset Switch with LED

BIOS Feature - 16Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

88

8

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

- CPU, VCCM, SB, VTT, PCH PLL Voltage Multi-adjustment

- Supports I. O. T. (Intelligent Overclocking Technology)

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version),

ASRock Software Suite (CyberLink DVD Suite and Creative

Sound Blaster X-Fi MB) (OEM and Trial Version)

Unique Feature - ASRock OC Tuner (see CAUTION 8)

- Intelligent Energy Saver (see CAUTION 9)

- Instant Boot

- ASRock Instant Flash (see CAUTION 10)

- ASRock OC DNA (see CAUTION 11)

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 12)

- ASRock U-COP (see CAUTION 13)

- Boot Failure Guard (B.F.G.)

- Combo Cooler Option (C.C.O.) (see CAUTION 14)

- Good Night LED

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU/Chassis/Power Fan Tachometer

- CPU Quiet Fan

- CPU/Chassis Fan Multi-Speed Control

- CASE OPEN detection

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

®

Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit

/ XP / XP 64-bit compliant

Certifications - FCC, CE, WHQL

- EuP Ready (EuP ready power supply is required)

(see CAUTION 15)

* For detailed product information, please visit our website: http://www.asrock.com

99

9

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page 60

of “User Manual” in the support CD.

2. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 35 for details.

3. This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 15 for proper installation.

4. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

®

7 /

Vista

TM

/ XP. For Windows

®

XP 64-bit and Windows

®

OS with 64-bit CPU,

there is no such limitation.

5. For those CPU that only support up to DDR3 1333, the XMP DDR3 1600

is supported through overclocking.

6. For microphone input, this motherboard supports both stereo and mono

modes. For audio output, this motherboard supports 2-channel, 4-channel,

6-channel, and 8-channel modes. Please check the table on page 3 for

proper connection.

7. Power Management for USB 2.0 works fine under Microsoft

®

Windows

®

7

64-bit / 7 / Vista

TM

64-bit / Vista

TM

/ XP 64-bit / XP SP1 or SP2.

8. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

®

environment.

Please visit our website for the operation procedures of ASRock OC

Tuner.

ASRock website: http://www.asrock.com/feature/OCTuner/index.htm

9. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. In other words, it is able to provide exceptional

power saving and improve power efficiency without sacrificing computing

performance. Please visit our website for the operation procedures of

Intelligent Energy Saver.

ASRock website: http://www.asrock.com/feature/IES/index.html

10. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.

This convenient BIOS update tool allows you to update system BIOS

without entering operating systems first like MS-DOS or Windows

®

. With

this utility, you can press <F6> key during the POST or press <F2> key to

BIOS setup menu to access ASRock Instant Flash. Just launch this tool

and save the new BIOS file to your USB flash drive, floppy disk or hard

drive, then you can update your BIOS only in a few clicks without prepar-

ing an additional floppy diskette or other complicated flash utility. Please

be noted that the USB flash drive or hard drive must use FAT32/16/12 file

system.

1010

10

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

11. The software name itself – OC DNA literally tells you what it is capable of.

OC DNA, an exclusive utility developed by ASRock, provides a conve-

nient way for the user to record the OC settings and share with others. It

helps you to save your overclocking record under the operating system

and simplifies the complicated recording process of overclocking settings.

With OC DNA, you can save your OC settings as a profile and share with

your friends! Your friends then can load the OC profile to their own system

to get the same OC settings as yours! Please be noticed that the OC

profile can only be shared and worked on the same motherboard.

12. Although this motherboard offers stepless control, it is not recommended

to perform over-clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU.

13. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

14. Combo Cooler Option (C.C.O.) provides the flexible option to adopt two

different CPU cooler types, Socket LGA 775 and LGA 1156. Please be

noticed that not all the 775 CPU Fan can be used.

15. EuP, stands for Energy Using Product, was a provision regulated by

European Union to define the power consumption for the completed system.

According to EuP, the total AC power of the completed system shall be

under 1.00W in off mode condition. To meet EuP standard, an EuP ready

motherboard and an EuP ready power supply are required. According to

Intel’s suggestion, the EuP ready power supply must meet the standard of

5v standby power efficiency is higher than 50% under 100 mA current

consumption. For EuP ready power supply selection, we recommend you

checking with the power supply manufacturer for more details.

1111

11

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

1.41.4

1.4

TT

T

wo CrossFwo CrossF

wo CrossF

ireXireX

ireX

TMTM

TM

Graphics Card Suppor Graphics Card Suppor

Graphics Card Suppor

t Listt List

t List

(for Windows

®

XP / XP 64-bit / Vista

TM

/ Vista

TM

64-bit / 7 / 7 64-bit)

Chipset Model Name Chipset Name Driver

Vendor

ATI

Powercolor AX3650 512MMD3-XP RADEON 3650 Catalyst 9.12

Gigabyte GV-RX385256H-B RADEON 3850 Catalyst 9.12

Powercolor AX3870 512MD4-H RADEON 3870 Catalyst 9.12

ASUS EAH4350 SILENT/DI/512MD2/A RADEON HD 4350 Catalyst 9.12

Powercolor AX4670 512MD3-P RADEON 4670 Catalyst 9.12

Gecube GC-HD485PG3-E3 RADEON 4850 Catalyst 9.12

ASUS EAH5850/G/2DIS/1GD5/A RADEON 5850 Catalyst 9.12

MSI-ATI-R5770-PM2D1G RADEON 5770 Catalyst 9.12

1.31.3

1.3

TT

T

wo SLIwo SLI

wo SLI

TMTM

TM

Graphics Card Suppor Graphics Card Suppor

Graphics Card Suppor

t Listt List

t List

(for Windows

®

XP / XP 64-bit / Vista

TM

/ Vista

TM

64-bit / 7 / 7 64-bit)

Chipset Model Name Chipset Name Driver

Vendor

NVIDIA

* For the latest updates of the supported PCI Express VGA card list for SLI

TM

Mode,

please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

MSI NX8600GT-T2D256E GeForce 8600 GT 195.62

Gigabyte GV-NX88T256H GeForce 8800 GT 195.62

LEADTEK PX8800 GTX TDH GeForce 8800 GTX 195.62

Chaintech GES96GT-A1512P GeForce 9600 GT 195.62

ASUS EN9800GT TDP/HTDP/512M GeForce 9800GT 195.62

LEADTEK PX9800GTX GeForce 9800GTX 195.62

LEADTEK PX9800 GTX+ GeForce 9800GTX+ 195.62

SPARKLE SF-PX98GX221024D3-NHM GeForce 9800GTX2 195.62

MSI N250GTS-2D512-OC GeForce GTS 250 195.62

GIGABYTE GV-N26-896H-B GeForce GTX260 195.62

LEADTEK-GTX275/896M GeForce GTX275 195.62

GIGABYTE-GV-N295-18I-B/1792M GeForce GTX295 195.62

* For the latest updates of the supported PCI Express VGA card list for

CrossFireX

TM

Mode, please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

1212

12

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

2.2.

2.

InstallationInstallation

Installation

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install mother-

board components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet

or the like. Also remember to use a grounded wrist strap or touch

a safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded

antstatic pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the

motherboard to the chassis, please do not over-tighten the

screws! Doing so may damage the motherboard.

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

For the installation of Intel 1156-Pin CPU,

please follow the steps below.

Before you insert the 1156-Pin CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

1156-Pin Socket Overview

1313

13

ASRock P55 Deluxe3 Motherboard

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear re-

tention tab.

Step 1-2. Rotate the load lever to fully open posi-

tion at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open posi-

tion at approximately 100 degrees.

Step 2. Remove PnP Cap (Pick and Place Cap).

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

Step 3. Insert the 1156-Pin CPU:

Step 3-1. Hold the CPU by the edges where are

marked with black lines.

Step 3-2. Orient the CPU with IHS (Integrated Heat

Sink) up. Locate Pin1 and the two ori-

entation key notches.

For proper inserting, please ensure to match the two orientation

key notches of the CPU with the two alignment keys of the

socket.

black line

Pin1

alignment key

Pin1

1156-Pin CPU

1156-Pin Socket

orientation key notch

EnglishEnglish

English

1414

14

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

Step 3-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 3-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

For proper installation, please kindly refer to the instruction manuals of your CPU fan and

heatsink.

Below is an example to illustrate the installation of the heatsink for 1156-Pin CPU.

Step 1. Apply thermal interface material onto center of

IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure

fan cables are oriented on side closest to the

CPU fan connector on the motherboard

(CPU_FAN1, see page 2, No. 5).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press down

on fastener caps with thumb to install and lock.

Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with

fan operation or contact other components.

Please be noticed that this motherboard supports Combo Cooler

Option (C.C.O.), which provides the flexible option to adopt two

different CPU cooler types, Socket LGA

775 and LGA 1156. The white throughholes

are for Socket LGA 1156 CPU fan.

1515

15

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

2.3 Installation of Memory Modules (DIMM)2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,

and supports Dual Channel Memory Technology. For dual channel configuration,

you always need to install identical (the same brand, speed, size and chip-

type) DDR3 DIMM pair in the slots of the same color. In other words, you have to

install identical DDR3 DIMM pair in Dual Channel (DDR3_A1 and DDR3_B1;

white slots; see p.2 No.7), so that Dual Channel Memory Technology can be

activated. This motherboard also allows you to install four DDR3 DIMMs for dual

channel configuration, and please install identical DDR3 DIMMs in all four slots.

You may refer to the Dual Channel Memory Configuration Table below.

Dual Channel Memory Configurations

DDR3_A2 DDR3_A1 DDR3_B2 DDR3_B1

(Blue Slot) (White Slot) (Blue Slot) (White Slot)

(1) - Populated - Populated

(2)* Populated Populated Populated Populated

* For the configuration (2), please install identical DDR3 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of white slots

(DDR3_A1 and DDR3_B1).

2. If only one memory module or three memory modules are installed

in the DDR3 DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot;otherwise, this motherboard and DIMM may be damaged.

4. Please install the memory module into the white slot (DDR3_B1) for

the first priority.

1616

16

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or removing

DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the slot

at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1717

17

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 4 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots:

PCIE1 / PCIE3 (PCIE x1 slot; White) is used for PCI Express cards with

x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 / PCIE4 (PCIE x16 slot; Blue) is used for PCI Express x16 lane

width graphics cards, or used to install PCI Express graphics cards to

support CrossFireX

TM

or SLI

TM

function.

1. In single VGA card mode, it is recommended to install a PCI Express

x16 graphics card on PCIE2 slot.

2. In CrossFireX

TM

mode or SLI

TM

mode, please install PCI Express x16

graphics cards on PCIE2 and PCIE4 slots. Therefore, both these two

slots will work at x8 bandwidth.

3. Please connect a chassis fan to motherboard chassis fan connector

(CHA_FAN1, CHA_FAN2 or CHA_FAN3) when using multiple

graphics cards for better thermal environment.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

1818

18

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

2.5 SLI2.5 SLI

2.5 SLI

TMTM

TM

and Quad SLI and Quad SLI

and Quad SLI

TM TM

TM

Operation GuideOperation Guide

Operation Guide

This motherboard supports NVIDIA

®

SLI

TM

and Quad SLI

TM

(Scalable Link Interface)

technology that allows you to install up to two identical PCI Express x16 graphics

cards. Currently, NVIDIA

®

SLI

TM

technology supports Windows

®

XP / XP 64-bit /

Vista

TM

/ Vista

TM

64-bit / 7 / 7 64-bit OS. NVIDIA

®

Quad SLI

TM

technology support

Windows

®

Vista

TM

/ Vista

TM

64-bit / 7 / 7 64-bit OS only. Please follow the installation

procedures in this section.

Requirements

1. For SLI

TM

or Quad SLI

TM

technology, you should have two identical

SLI

TM

-ready graphics cards that are NVIDIA

®

certified.

2. Make sure that your graphics card driver supports NVIDIA

®

SLI

TM

technology. Download the driver from NVIDIA

®

website

(www.nvidia.com).

3. Make sure that your power supply unit (PSU) can provide at least the

minimum power required by your system. It is recommended to use

NVIDIA

®

certified PSU. Please refer to NVIDIA

®

website for details.

2.5.1 Graphics Card Setup2.5.1 Graphics Card Setup

2.5.1 Graphics Card Setup

2.5.1.1 Installing T2.5.1.1 Installing T

2.5.1.1 Installing T

wo SLIwo SLI

wo SLI

TMTM

TM

-R-R

-R

eady Graphics Cardseady Graphics Cards

eady Graphics Cards

Step 1. Install the identical SLI

TM

-ready graphics cards that are NVIDIA

®

certified

because different types of graphics cards will not work together properly.

(Even the GPU chips version shall be the same.) Insert one graphics card

into PCIE2 slot and the other graphics card to PCIE4 slot. Make sure that the

cards are properly seated on the slots.

Step2. If required, connect the auxiliary power source to the PCI Express graphics

cards.

1919

19

ASRock P55 Deluxe3 Motherboard

Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI

connector of the graphics card that is inserted to PCIE2 slot.

Step3. Align and insert ASRock SLI_Bridge_2S Card to the goldfingers on each

graphics card. Make sure ASRock SLI_Bridge_2S Card is firmly in place.

ASRock SLI_Bridge_2S Card

2.5.2 Driver Installation and Setup2.5.2 Driver Installation and Setup

2.5.2 Driver Installation and Setup

Install the graphics card drivers to your system. After that, you can enable the Multi-

Graphics Processing Unit (GPU) feature in the NVIDIA

®

nView system tray utility.

Please follow the below procedures to enable the multi-GPU feature.

For Windows

®

XP / XP 64-bit OS:

(For SLI

TM

mode only)

A. Double-click NVIDIA Settings icon on your Windows

®

taskbar.

B. From the pop-up menu, select Set SLI and PhysX configuration. In

Set PhysX GPU acceleration item, please select Enabled. In Select

an SLI configuration item, please select Enable SLI. And click Apply.

C. Reboot your system.

D. You can freely enjoy the benefit of SLI

TM

feature.

EnglishEnglish

English

2020

20

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

For Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS:

(For SLI

TM

and Quad SLI

TM

mode)

A. Click the Start icon on your Windows taskbar.

B. From the pop-up menu, select All Programs, and then click NVIDIA

Corporation.

C. Select NVIDIA Control Panel tab.

D. Select Control Panel tab.

E. From the pop-up menu, select Set SLI and PhysX configuration. In

Set PhysX GPU acceleration item, please select Enabled. In Select

an SLI configuration item, please select Enable SLI. And click Apply.

F. Reboot your system.

G. You can freely enjoy the benefit of SLI

TM

or Quad SLI

TM

feature.

* SLI

TM

appearing here is a registered trademark of NVIDIA

®

Technologies Inc., and is used

only for identification or explanation and to the owners’ benefit, without intent to infringe.

La pagina sta caricando ...

ASROCK P55 DELUXE3 Manuale del proprietario

Questo manuale è adatto anche per

ASROCK P55 DELUXE3 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti