Inventor MB492S Mini Bar Refrigerator Manuale utente

MODEL:

MB492S

MB494B

• USER’S MANUAL

• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

• MANUAL UTILIZATORULUI

• BEDIENUNGSANLEITUNG

• MANUEL D'UTILISATEUR

• MANUALE DELL’ UTENTE

• MANUAL DE USUARIO

REFRIGERATOR

ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA | DEUTSCH |

FRANÇAIS | ITALIANO | ESPAÑOL

MINI BAR

LANGUAGES

ENGLISH .....................................................................................................3

ΕΛΛΗΝΙΚΑ ................................................................................................. 21

ROMANA ..................................................................................................39

DEUTSCH ..................................................................................................56

FRANÇAIS .................................................................................................75

ITALIANO ..................................................................................................93

ESPAÑOL ................................................................................................111

3

EN

TABLE OF CONTENTS

1. SAFETY & WARNING INSTRUCTIONS ................................................................. 4

2. ELECTRICAL INFORMATION ............................................................................... 6

3. SOCIABLE REMARKS ENVIRONMENTAL PROTECTION ..................................... 6

4. STEPS BEFORE USE ............................................................................................. 7

5. GETTING TO KNOW YOUR MINI BAR ................................................................. 8

6. MINI BAR FEATURES ........................................................................................... 9

7. INSTALLATION GUIDELINES ............................................................................ 11

8. SETTINGS ........................................................................................................... 14

9. MAINTENANCE & CLEANING ........................................................................... 15

10. STORAGE ......................................................................................................... 16

11. TIPS .................................................................................................................. 17

12. TROUBLESHOOTING ....................................................................................... 17

Dear Consumer,

Congratulations on your choice!

Inventor Mini Bars, cover multiple needs and demands,

not limited only to small student's apartments but also

accommodating hotel rooms.

F Energy class eciency, low energy consumption and a

modern design, is an ideal combination, making Inventor

Mini Bars the best choice!

Please refer to this manual of the Mini Bar, through the

guidelines included, to benet from both, energy savings

and performance eciency.

4EN

!

1. SAFETY & WARNING INSTRUCTIONS

l No children under the age of 8 should be permitted to operate this electric device.

Be certain, that children, handicapped people, or people with the lack of knowledge

and experience, must be supervised, depending the situation, by persons responsible

for their well-being and do not undertake procedures such as the cleaning or the

maintenance of this device.

l It is important that adequate supervision is provided and no minors are left unattended

with this device.

l This refrigerator is intended to be used in household and similar residential applications

such as:

1) Farmhouses; sta kitchen areas in shops, oces and other working environments;

2) By clients in hotels, motels bed and breakfast and other residential type

environments.

l Do not install the appliance in areas that are too humid or too cold, such as construction

appendices, garages or wine cellars.

l This device should always be kept in an upright position to avoid any damage.

l If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualied persons to avoid a hazard. Never attempt to dismantle, repair

or modify the device.

l Ventilation openings, in both the appliance’s enclosure and in the built-in structure

should be clear of obstructions. Mechanical devices or other means of accelerated

defrosting should not be used, only methods recommended from the manufacturer

should be applied.

l As this device is heavy, always be cautious when relocating, safety gloves are

recommended.

l When relocating this appliance, slightly lift from the front, in order to avoid any oor

damage.

l Do not attempt to repair, dismantle or modify this appliance. Contact your authorized

service technician for repair or maintenance of this device.

l Do not operate this unit by switching the main power supply on or o.

l During operation, do not touch the compressor or the condenser, be cautious as they

are hot.

l Do not place heavy objects on the power cord. Make sure that the cord is not

compressed.

l Do not place cord under any obstacles (carpets rugs or runners etc). Cord should be

arranged away from areas where accidental tripping may occur.

l Do not operate other electric appliances inside the food storage compartments of this

device, unless recommended by the manufacturer.

l Do not store explosive substances such us aerosol cans with a ammable propellant

in this appliance.

l The refrigerant circuit should remain intact. If damage occurs, be extremely cautious

of any ames or sources of ignition. Ventilate the room.

l Do not sit or climb on the device.

l Do not place the unit in direct sunlight or near other heating sources like radiators,

cookers, ovens or hobs.

l Do not use the unit near heat sources, chemicals, radiators, ammable materials or

re.

5

EN

l For EN standard: This appliance can be used by children aged from 8 years and above

and persons with reduce physical sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the appli-

ance in a safe way and understand the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be made by children without supervi-

sion. Children aged from 3 to 8 years are allowed to load and unload refrigerating appli-

ances.

l To avoid contamination of food, please respect the following instructions:

– Opening the door for long periods can cause a signicant increase of the temperaturein

the compartments of the appliance.

– Clean regularly surfaces that can come in contact with food and accessible drainagesys-

tems.

– Clean water tanks if they have not been used for 48 h; ush the water systemconnected

to a water supply if water has not been drawn for 5 days.(note 1)

– Store raw meat and sh in suitable containers in the refrigerator, so that it is not in con-

tact with or drip onto other food.

– Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or

making ice-cream and making ice cubes.(note 2)

– One-, two- and three-star compartments are not suitable for the freezing of freshfood.

(note 3)

– For appliances without a 4-star compartment: this refrigerating appliance is notsuitable

for freezing foodstus.(note 4)

– If the refrigerating appliance is left empty for long periods, switch o, defrost, clean,dry,

and leave the door open to prevent mould developing within the appliance.

l Note 1,2,3,4: Please conrm whether it is applicable according to your product compart-

ment type.

l For a freestanding appliance: this refrigerating appliance is not intended to be used as a

built-in appliance.

6EN

2. ELECTRICAL INFORMATION

l The nameplate, with all the electrical and technical data of this appliance, is located

on the rear panel.

l The appliance should be installed in accordance with national wiring regulations.

l Be sure the device is grounded properly. Proper grounding is important as it minimizes

the chance of electric shock or re. The power cord is equipped with a grounding plug

for protection against electric shock hazards.

l The device must be used in a properly grounded wall socket. If the specic socket

you intend to use is not adequately grounded or protected by a time delay fuse or

circuit breaker, have a qualied electrician install the proper receptacle.

l Ensure the wall socket is still accessible after the installation of the refrigerator.

l Do not use extension cords or adapter plugs with this device.

l Make sure not to cause damage to the electrical components (e.g. main plug, main

cable, compressor). Contact the Service or an electrician to change the electrical

components.

l To avoid personal injury, always disconnect the power supply of the device, before

maintenance.

Power o the refrigerator before removing the plug. Do not

disconnect the plug from the wall socket by pulling on the cord.

3. SOCIABLE REMARKS

ENVIRONMENTAL PROTECTION

Disposal of equipment no longer used:

Please follow the instructions below, when using this refrigerator in European countries.

l This appliance requires special treatment for disposal. In the European Union,

electronic equipment must not be treated as domestic waste, but must be disposed of

professionally in accordance with Directive 2002/96/EC of the European Parliament and

Council of 27th January 2003 concerning old electrical and electronic equipment. The

disposal of this unit should follow all legal requirements and should not be disposed as

unsorted municipal waste.

The hazardous substances can leak into the ground water supply thus entering the food

chain, endangering your health and the environment.

l There are several alternative solutions for disposal. Please remove all doors before

disposal to prevent children’s accidental trapping.

A) Your local municipality has established free collection systems for electronic

waste.

B) Your local retailer upon purchase of a new product.

C) The manufacturer may accept the old appliance for disposal.

D) Old appliances sometimes contain valuable resources for scrap metal

dealers.

7

EN

For warranty purposes, please

note the SN (serial number).

The SN is labeled opposite the

device.

Please refer to the electronic

warranty instructions,

in the last page (English

section) of this manual.

4. STEPS BEFORE USE

Mini Bar

User's manual

SN: D2002255780115715200209

8EN

5. GETTING TO KNOW YOUR MINI BAR

1. Thermostat 2. Plate 3. Shelf 4. Door Compartments

5. Bottle Rack 6. Reversible Door 7. Adjustable Feet 8. Power Cord

6

7

8

1

2

3

4

5

9

EN

6. MINI BAR FEATURES

MODEL NAME

Category

Color

Total Storage Volume (L)

Energy Class

Energy Consumption (kWh/annum)

Power Supply (V/Hz/Ph)

Climate Class

Refrigerant/Mass (g)

Noise Level [dB(A)]

Product Dimensions (WxDxH) (mm)

Net Weight (Kg)

Number of shelves

Interior Light

Power Cord Length (mm)

Reversible Door

Built-in

MB492S

MINI BAR

Silver

43

F

100

220-240/50/1

N/ST/T

R600a/15g

41(C)

472x450x492

13.9

1

NO

1700

YES

NO

MB494B

MINI BAR

Black

43

F

100

220-240/50/1

N/ST/T

R600a/15g

41(C)

472x450x492

13.9

1

NO

1700

YES

NO

Place the appliance in a location where the ambient temperature corresponds to the

ambient temperature:

Class Symbol Ambient temperature range °C

Extended temperate SN + 10 to + 32

Temperate N + 16 to + 32

Subtropical ST + 16 to + 38

Tropical T + 16 to + 43

Extended temperate: 'this refrigerating appliance is intended to be used at ambient

temperatures ranging from 10°C to 32°C

Temperate: 'this refrigerating appliance is intended to be used at ambient temperatures

ranging from 16°C to 32°C

Subtropical: ‘ this refrigerating appliance is intended to be used at ambient temperatures

ranging from 16 °C to 38 °C

Tropical: ‘ this refrigerating appliance is intended to be used at ambient temperatures

ranging from 16°C to 43°C

Table 1 Climate classes

10 EN

Interior Dimensions (mm)

*There might be a deviation regarding the above prices. Kindly refer to the purchased product.

75

400

66

98

350

127

200

110

210

392

95

220

265

135

180

11

EN

7. INSTALLATION GUIDELINES

1. Allow sucient air

ventilation surrounding the

unit. The rear end (backside)

of this appliance should

stand against a wall allowing

sucient air ventilation as

follows:

➟ 20cm from the top

➟ 15cm from the back

➟ 40cm from the rest sides

2. Wait at least 4 hours before

connecting the appliance to the

power supply, thus, allowing all

uids to settle in the compressor.

3. Upon initial use, operate continuously

for 24 hours, thus ensuring the correct

temperature is reached and smooth

operation of the unit is achieved.

Position

Upon the positioning of this unit, keep in mind the oor must be at and sturdy and the

room should be well ventilated, without additional heating sources nearby.

12 EN

Reversible Door

The door opening can change from either the left or the right side, according to what

is best suited for its location. Ensure there is enough adequate space for the door to

open fully. To change the door opening direction, please follow the mentioned below

instructions:

Required tools:

Head Screwdriver / Slot head Screwdriver / Hexagonal Spanner

• Before reversing the door swing, unplug the appliance from the power supply

and remove goods from fridge.

2. Remove the plastic cover located on

the top right or left (depending on initial

door installation side) of the door hinge,

and unscrew the two screws with the

stabilizing pin.

3. Slightly tilt so that you may have

access to the front bottom bracket.

Unscrew the two screws located on

the bottom left or right (depending

on initial door installation side)and

remove the foot from the opposite

side. Once top and bottom screws and

also the opposite foot are removed,

the door will be completely released.

1. Adjust the two leveling feet to their highest

position. Tilt the unit slightly backwards to take

the door o. Rest the unit on something solid

so that it will not slip during the door reversing

process.

Do not lay the unit at as this may

damage the coolant system.

13

EN

4. Remove the three plastic caps

from the side you are going to install

the door, and place them on the

side where the door was originally

installed, in order to cover the three

screw holes.

5. Place the door on the desired side

making sure it is in its upright position.

Screw the top two screws of the door

hinge. Slightly tilt, for better positioning,

and screw the bottom hinge

into place, and also screw the

removed foot on the other side.

Once completed clip on the top

plastic cap.

6. Check if door is aligned

horizontally and vertically and that

the door when shut is completely

sealed from all sides.

7. Finally tighten the bottom hinge and re-adjust

the foot on the opposite side for correct leveling.

14 EN

Leveling the Unit

Adjust the two levelling feet at

the front of the unit. If the unit

is not aligned, the door and

magnetic seal alignments will

not be covered properly.

Thermorstat Temperature Setting

The thermostat is located in the interior at the

upper part of the refrigerator. The adjustment

levels of the thermostat range from 1 to 6:

• Setting “OFF”: the cooling operation stops

• Thermostat adjustment between 1-2:

Minimum cooling

It is suggested when the storage quantity is

very small.

• Thermostat adjustment between 3-4:

Normal cooling

When installing the appliance for the first

time, be sure to set the thermostat to the

Normal cooling and wait 24hours before placing

items inside.

• Thermostat adjustment between 5-6: Maximum cooling

If there is a large amount of frozen goods, or if the outside temperature is high, the

thermostat knob may be set to its highest position, for a short time.

For determining the correct temperature control setting,

consider the following:

✓ Room temperature

✓ How frequent the Mini Bar door opens

✓ The quantity of stored goods

✓ Position of the appliance

8. SETTINGS

✔✔

xx

15

EN

Prior to cleaning the appliance, un-

plug from the wall power socket,

and remove all shelves.

• Clean the appliance with a

moist soft cloth. Use only neutral

detergents.

• Clean the unit’s interior with a

weak bicarbonate soda solution

and rinse with warm water applying

a damp sponge or cloth.

• Use a damp cloth to clean the

exterior, keep in mind the door must be shut to avoid getting any polish on the magnetic

door seal or the interior of the unit.

• Upon cleaning, rinse the interior with clean water and dry.

• Allow the appliance to dry for

approximately 1 to 2 hours.

• Set thermostat to middle position.

Plug into a power source. The

appliance will chill continuously until

set temperature has been reached.

• Frequently the air vents and the

condenser must be cleaned located

at the rear end of the appliance,

using a vacuum cleaner or a brush. The

condenser should always be clean, free of

dust or any other impurities.

• Do not use abrasive products, abrasive cleaning pads,

solvents or metal objects. Do not use water spray and

steam to clean the appliance.

• Do not use extreme moist cleaning pads. Any moisture

around the electric components, should be avoided.

• The use of a steam cleaner is prohibited, as this may

be very dangerous.

9. MAINTENANCE & CLEANING

Clean the

interior of

the appliance

ONCE A

MONTH

16 EN

10. STORAGE

When appliance is inactive for an extended period of time, please make sure you follow

the instructions below, for the appropriate storage of your appliance:

• Turn the unit o allowing one day before storage.

• Remove all the items from the interior compartment.

• Clean the removable parts of the device.

• Leave the door open to prevent unpleasant odors.

• Cover the device.

• Store the refrigerator in upright position, in a dry, well ventilated area and avoid direct

sunlight.

Defrosting

It is recommended to defrost the chill box when 3-4mm frost has been accumulated. To

implement the defrosting process, consider the following steps:

1. Unplug the appliance.

2. Empty the appliance.

3. Keep the door open while the defrosting process is on progress.

4. Make sure that the interior is free of frost and clean the chill box with a soft cloth.

5. Re-plug, allow appliance to operate for approximately 4 hours, then rell.

• Never use sharp or metal objects to remove frost

while defrosting

• Do not use any mechanical devices or instruments to

accelerate the defrosting process without consulting

the manufacturer rst

17

EN

11. TIPS

✓ Do not place products too close. Ensure a sucient distance for optimum air circulation

in the refrigerator.

✓ Avoid extensive use of the door on wet and hot weather, keep in mind, once the door

is opened to shut the soonest possible.

✓ Do not place goods in direct contact with the wall of the refrigerator, always allow

some space.

✓ Never place inside the unit, hot or even warm goods without allowing them to chill rst.

✓ Be certain the wall behind the appliance is dirt and dust free, especially with outer

condenser equipped units.

✓ Do not place goods that are not sealed or well packed directly under the chill box.

12. TROUBLESHOOTING

ISSUE CAUSE / REMMEDY

Appliance is not

working

The plug is not in the socket. Put the plug in the socket.

Temperature in

refrigerator is too

high or too low

Thermostat has been set incorrectly. Set the thermostat

correctly.

Condensation

appears on the

outside surface of

the unit

This may be caused by a change in the room’s temperature.

Use a soft cloth to wipe away any condensation. If the

problem remains, contact a certied technician for

assistance.

Appliance is

making a noise

1) The refrigerant liquid causes noises in the cooling system.

2) Noise is produced while the compressor is operating, as

refrigerant uid is being pumped within the unit.

3) Make sure the refrigerator is levelled and balanced.

4) Goods have been placed incorrectly in the refrigerator.

Place the goods correctly in the refrigerator.

5) Check if the refrigerator’s components are in the proper

position.

Odor 1) Goods are not stored in sealed containers

2) There are spoiled goods inside

3) The interior needs to be cleaned

18 EN

The refrigerator

door can’t be

properly closed

Make sure items are not blocking the door.

Make sure the refrigerator is not overlled.

Make sure the refrigerator is not tilted.

Long term

operation of the

compressor

It is normal if the compressor runs for a long time during high

ambient temperatures.

Avoid overlling.

Allow warm and hot goods to chill prior to placing them in the

unit.

Avoid the frequent opening of the door.

There is ice all

around the chill

box

Follow the “defrosting process” mentioned on Section 9.

19

EN

Ordered Part Provided by Minimum Time Required for

Provision

Thermostats Professional maintenance

personnel At least 7 years after the last model

is launched on the market

Temperature

sensors Professional maintenance

personnel At least 7 years after the last model

is launched on the market

Printed circuit

boards Professional maintenance

personnel At least 7 years after the last model

is launched on the market

Light sources Professional maintenance

personnel At least 7 years after the last model

is launched on the market

Door handles Professional repairers and

nal users At least 7 years after the last model

is launched on the market

Door hinges Professional repairers and

nal users At least 7 years after the last model

is launched on the market

Trays Professional repairers and

nal users At least 7 years after the last model

is launched on the market

Baskets Professional repairers and

nal users At least 7 years after the last model

is launched on the market

Door gaskets Professional repairers and

nal users At least 7 years after the last model

is launched on the market

The ordered parts in the following table can be aquired from the channel of Inventor:

All the pictures in the manual are for explanatory purposes only. The actual shape of the

unit you purchased may be slightly dierent, but the operations and functions are the same.

The company may not be held responsible for any misprinted information. The design and

the specications of the product for reasons, such as product improvement, are subject to

change without any prior notice.

Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for

further details. Any future updates to the manual will be uploaded to the service website,

and it is advised to always check for the latest version.

Scan here to download the latest version of this manual.

www.inventorappliances.com/manuals

20 EN

Activate your Warranty

l Visit our web site and activate your warranty via the below link or by

scanning the QR code

https://www.inventorairconditioner.com/warranty-inventor

l Fill all the elds as shown below

þ

once the warranty submission has been completed a conrmation message will be

sent to your email

Full Name*

Address*

Postal Code*

Phone Number*

E-mail*

Unit Type*

Serial Number of the unit*

Date of Purchase*

Invoice Number*

Additional Details

Subscribe to Inventor's Newsletter

Owner details Unit details

To activate the warranty card, please ll in the following elds

* Required eld

With the current warranty card you accept the terms and conditions.

SEND

Follow the next quick steps to activate your warranty:

STEP 1

Visit our website via the link:

https://www.inventorairconditioner.com/warranty-inventor

or by scanning the QR code, as follows:

STEP 2

Fill in the obligatory fields as requested in the “Owner’s details” and “Unit’s details”:

STEP 4

Wait for the confirmation email you will receive at the email address you have filled

in - please also check your spam folder.

STEP 5

Inventor warranty is now valid!

STEP 3

Click SEND button at the end of the submission form:

þ

once the warranty submission has been completed a conrmation

message will be sent to your email

Activate your Warranty

l Visit our web site and activate your warranty via the below link or by

scanning the QR code

https://www.inventorairconditioner.com/warranty-inventor

l Fill all the elds as shown below

þ

once the warranty submission has been completed a conrmation message will be

sent to your email

Full Name*

Address*

Postal Code*

Phone Number*

E-mail*

Unit Type*

Serial Number of the unit*

Date of Purchase*

Invoice Number*

Additional Details

Subscribe to Inventor's Newsletter

Owner details Unit details

To activate the warranty card, please ll in the following elds

* Required eld

With the current warranty card you accept

the terms and conditions.

SEND

Activate your Warranty

l Visit our web site and activate your warranty via the below link or by

scanning the QR code

https://www.inventorairconditioner.com/warranty-inventor

l Fill all the elds as shown below

þ

once the warranty submission has been completed a conrmation message will be

sent to your email

Full Name*

Address*

Postal Code*

Phone Number*

E-mail*

Unit Type*

Serial Number of the unit*

Date of Purchase*

Invoice Number*

Additional Details

Subscribe to Inventor's Newsletter

Owner details Unit details

To activate the warranty card, please ll in the following elds

* Required eld

With the current warranty card you accept the terms and conditions.

SEND

Activate your Warranty

l Visit our web site and activate your warranty via the below link or by

scanning the QR code

https://www.inventorairconditioner.com/warranty-inventor

l Fill all the elds as shown below

þ

once the warranty submission has been completed a conrmation message will be

sent to your email

Full Name*

Address*

Postal Code*

Phone Number*

E-mail*

Unit Type*

Serial Number of the unit*

Date of Purchase*

Invoice Number*

Additional Details

Subscribe to Inventor's Newsletter

Owner details Unit details

To activate the warranty card, please ll in the following elds

* Required eld

With the current warranty card you accept the terms and conditions.

SEND

Activate your Warranty

l Visit our web site and activate your warranty via the below link or by

scanning the QR code

https://www.inventorairconditioner.com/warranty-inventor

l Fill all the elds as shown below

þ

once the warranty submission has been completed a conrmation message will be

sent to your email

Full Name*

Address*

Postal Code*

Phone Number*

E-mail*

Unit Type*

Serial Number of the unit*

Date of Purchase*

Invoice Number*

Additional Details

Subscribe to Inventor's Newsletter

Owner details Unit details

To activate the warranty card, please ll in the following elds

* Required eld

With the current warranty card you accept the terms and conditions.

SEND

Activate your Warranty

La pagina sta caricando ...

Inventor MB492S Mini Bar Refrigerator Manuale utente

Inventor MB492S Mini Bar Refrigerator Manuale utente

in altre lingue

Documenti correlati

Altri documenti