TOA WM-D5200 -C4/-C7/-G1/-H1 Manuale utente

WM-D5200Digital Wireless Microphone

instrUction ManUal

Thank you for purchasing TOA’s Digital Wireless Microphone.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

English: page 1 Français: page 34

Deutsch: seite 18 Español: página 50

note regarDing the Use oF

the DeDicateD BatterY anD its charger

The BC-2000 Battery Charger and the WB-2000-2 Rechargeable

Battery described in the instruction manual are not intended for use in

the U.S.A. and Canada, and are therefore not sold in those countries.

2

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS

......................................................................................................... 3

2. GENERAL DESCRIPTION ....................................................................................................... 5

3. FEATURES ................................................................................................................................. 5

4. HANDLING PRECAUTIONS .................................................................................................... 5

5. NOMENCLATURE AND FUNCTIONS ................................................................................... 6

6. PREPARING BATTERIES ........................................................................................................ 8

6.1. Battery Insertion .................................................................................................................... 8

6.2. Guide to Battery Operating Times ........................................................................................ 8

6.3. When Operating on Rechargeable Battery .......................................................................... 9

7. OPERATION ............................................................................................................................. 10

8. FUNCTION SETTINGS .......................................................................................................... 10

8.1. Setting the Bank and Channel Numbers ............................................................................ 10

8.2. Performing Encryption Settings ......................................................................................... 11

8.3. Performing Code Settings (When Encryption Function Is OFF) ........................................ 14

8.4. Performing Transmission Output Changeover Switch Settings ......................................... 15

9. CONVENIENT FUNCTIONS

(MICROPHONE SENSITIVITY SELECTOR SWITCH SETTINGS)

.................................. 16

10. SPECIFICATIONS ................................................................................................................. 17

Accessories ............................................................................................................................. 17

3

1. SAFETY PRECAUTIONS

•Beforeuse,besuretocarefullyreadalltheinstructionsinthissectionforcorrectandsafe

operation.

•Besuretofollowalltheprecautionaryinstructionsinthissection,whichcontainimportant

warnings and/or cautions regarding safety.

•Afterreading,keepthismanualhandyforfuturereference.

When the Unit is in Use

•Besuretouseadedicatedbatterycharger

when recharging a battery. Using other

battery charger may cause the battery to

leakorexplode,resultinginare,personal

injury, property damage, and/or pollution.

•Topreventtheelectromagneticwavefrom

badlyinuencingmedicalequipment,make

sure to switch off the unit's power when

placing it in close proximity to the medical

equipment.

When the Unit is in Use

•Whentheunitisnotinusefor2weeksor

more, be sure to take the batteries out of the

unit because battery leakage may cause a

re, personal injury, or contamination of

environment.

•Makesuretoobservethefollowinghandling

precautionssothatareorpersonalinjury

does not result from leakage or explosion of

the battery.

· Do not short, disassemble, heat nor put

thebatteryintoare.

· Avoid using both new and old batteries

together.

· Never charge batteries of the type which

are not rechargeable.

· Do not solder a battery directly.

·Be sure to use the specied type of

batteries.

· Note correct polarity (positive and

negative orientation) when inserting a

battery in the unit.

· Avoid locations exposed to the direct

sunlight, high temperature and high

humidity when storing batteries.

Do not place the dry cell battery into charger.

Placing non-rechargeable batteries in the

charger may cause the battery to crack

resultinginareand/orharmtothebody.

When recharging, please only use the BC-

2000 Battery charger and WB-2000 Battery.

Do not use other battery types.

Whenthebatterybecomesinatedorleaks,

discontinue use and replace with new one

immediately.

If there’s any burning and/or peculiar smell

while charging the battery, please switch off

the power immediately.

CAUTION TO USER:

Changes or modications not expressly

approved by the party responsible for

compliance could void the user's authority to

operate the equipment.

IMPORTANT NOTE: To comply with the

FCC RF exposure compliance requirements,

no change to the antenna or the device is

permitted. Any change to the antenna or the

device could result in the device exceeding

the RF exposure requirements and void

user’s authority to operate the device.

Indicates a potentially hazardous situation

which, if mishandled, could result in death

or serious personal injury.

WARNING

Indicates a potentially hazardous situation

which, if mishandled, could result in

moderate or minor personal injury, and/or

property damage.

CAUTION

4

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

This device operates on a no-protection, no-interference basis. Should the user seek to

obtain protection from other radio services operating in the same TV bands, a radio licence is

required. For further details, consult Innovation, Science and Economic Development Canada’s

document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-

Power Radio Apparatus in the TV Bands.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Ce dispositif fonctionne selon un régime de non-brouillage et de non-protection. Si l’utilisateur

devait chercher à obtenir une certaine protection contre d’autres services radio fonctionnant

dans les mêmes bandes de télévision, une licence radio serait requise. Pour en savoir plus,

veuillez consulter la Circulaire des procédures concernant les clients CPC-2-1-28, Délivrance

de licences sur une base volontaire pour les appareils radio de faible puissance exempts de

licence et exploités dans les bandes de télévision d’Innovation, Sciences et Développement

économique Canada.

5

2. GENERAL DESCRIPTION

The WM-D5200 is a digital wireless microphone employing a condenser microphone element that

features high sensitivity and clear sound quality. The microphone is specially designed to be used

in conjunction with TOA's WT-D5800 digital wireless receiver.

3. FEATURES

•EmploysthePLL-synthesizersystem.

•TOA'suniquedigitalaudioprocessingtechnologyensureshighqualitysound.

•Digital transmissionis highlyresistant toradio interference and noise,enablingclearer,more

stable communication.

•Whenusedforimportantconferencesorinotherhigh-securityvenues,TOA'suniqueencryption

software combines with digital transmission technology to prevent leakage of or eavesdropping

on sensitive information.

•Switchablemicrophonesensitivityallowstheunittobeusedinawiderangeofapplications.

•Powercanbesuppliedbyeitherthededicatedrechargeable(NiH2=nickel-hydrogen)batteryor

an AA alkaline battery. When replacing the rechargeable battery, use the optional TOA WB-2000-

2 (package of 2).

•Employsaninternalantenna.

4. HANDLING PRECAUTIONS

•Donotexposetheunittorainoranenvironmentwhereitmaybesplashedbywaterorother

liquids, as doing so may result in unit failure.

•Neveropennorremovetheunitcasetomodifytheunit.ReferallservicingtoyournearestTOA

dealer.

•Takecarenottodroptheunitontotheoornorbumpitagainstahardobjectastheunitcouldfail.

•Donotplacetheunitinlocationsofhightemperature(ex.inanill-ventilatedcarinsummer)orhigh

humidity as the unit could fail.

•Donotusetheunitinlocationswhereitisexposedtoseawater.

•Toclean,useadrycloth.Whentheunitgetsverydirty,wipelightlywithaclothdampedinadilute

neutral cleanser, then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated

cleaning towel.

•Avoidusingamobiletelephoneneartheunitinuse.Noisecouldbepickedup.

•Whenusingtwoormoreunits,keepthematleast50cmawayfromeachothertoavoidmalfunctions

or noise.

•Keeptheunitatleast3mawayfromthereceivingantenna.Usingtheunitincloseproximitytothe

antenna could result in malfunctions or noise.

6

5. NOMENCLATURE AND FUNCTIONS

1. Power switch [ON/OFF]

Power can be turned on by sliding the power switch to the

ON position, while it can be turned off by sliding it back to the

OFF position.

2. Battery checker (green/orange/red)

Lit: Power ON

Unlit: Power OFF*

The remaining battery power is represented by the color of

the indicator.

Green: Battery power is at full charge.

Orange: Battery power depletion has started.

Red: Battery power is almost depleted, and battery

replacement is required.

* When the battery power is depleted, the indicator will not

light up.

Note

The microphone does not transmit the signal if the bank and

channel selector switches are set to the empty channel.

Inthiscase,theindicatorashesredandgreenalternately.

3. Microphone grip (Battery compartment cover)

The internal parts consist of the battery compartment and

switches for various settings.

ON

OFF

1

2

3

[Front]

7

4. Bank selector switch

Make sure that the microphone is identical

to the wireless receiver in the bank number.

5. Channel selector switch

Make sure that the microphone is identical

to the wireless receiver in the channel

number.

6. Maintenance port

Not used.

Note

Never open the rubber cover.

7. Encryption indicator

Lit: Encryption ON

Unlit: Encryption OFF

8. Encryption setting switch

9. Code setting switch [0 – 9]

10. Transmission output changeover switch

[H/L]

H:10mW

L: 1 mW

11. Battery compartment

Insert and use a dedicated rechargeable

battery or AA alkaline batteries.

12. Microphone sensitivity selector switch

[H/L]

H:0dB

L: –10 dB

ON

OFF

H L

6

7

8

9

10

11

4

5

[Battery case internals – front] [Battery case internals – side]

12

8

6. PREPARING BATTERIES

The WM-D5200 can operate on both the optional rechargeable battery or replaceable dry batteries.

Please carefully read the corresponding sections for correct use.

6.1. Battery Insertion

Step 1. Turn off the power switch.

Step 2. Holdthemicrophonebodyandrotatethebattery

compartment cover counterclockwise to remove

it.

Step 3. Insert an AA battery according to (+) and (–)

indications on the battery compartment.

For the rechargeable battery, use the optional

TOA WB-2000-2 (package of 2).

For dry batteries, use either the supplied battery

or commercial AA alkaline batteries (LR6).

Step 4. Replace the battery compartment cover by

sliding and rotating it clockwise.

6.2. Guide to Battery Operating Times

6.2.1. Remaining operating time

The color of the battery checker changes from green to orange as

battery consumption progresses, and to red if the battery is further

continuously used. When the battery checker turns red, charge the

battery if the dedicated rechargeable battery is used. In the case of dry

batteries, replace it with a new one.

[Guide to the remaining operating time based on the battery

charge indicator status]

Battery checker status Remaining operating time

Lights green 2 – 8 hours

Lights orange Less than 2 hours

Lights red Battery requires charge or replacement.

6.2.2. Continuous operating time

Guide to continuous operating times: Approx. 8 hours (for fully-charged dedicated rechargeable

battery or alkaline battery)

Note

Operating times may vary depending on usage conditions, such as ambient temperature.

2

3

ON

OFF

Green Orange Red

9

6.3. When Operating on Rechargeable Battery

Notes

•Whenoperatingonrechargeablebatteries,theoptionalBC-2000Batterychargerisrequired.

•For rechargeable batteries, be sure to use the optional BC-2000 or the optional WB-2000-2

(package of 2).

•Avoidusingothermakesofrechargeablebatteries.

•WhenusingtheWB-2000rechargeablebatteryforthersttimeorwhenusingitafterithasbeen

stored for a long period of time, be sure to charge it before use.

•TheWB-2000batteryisdesignedtocyclethroughabout500chargesanddischarges.Whenthe

microphone operation interval becomes extremely short after prolonged repeated use, change

the battery with a new one.

•Charge the rechargeable battery after it has been fully used. (The wireless microphone will

continue to operate for approx. 8 hours per charge.) Frequent charging at short intervals may

shorten the operating life of the rechargeable battery.

[How to charge]

Step 1. Place the WB-2000 rechargeable battery in the wireless microphone.

(See p. 8, "Battery Insertion.")

Step 2. Set the wireless microphone's power switch to the OFF

position.

Step 3. Fully insert the wireless microphone into the microphone

receptacle of the BC-2000 Battery charger.

The BC-2000's charging indicator lights red and charging

begins.

Charging is completed in approximately 3 hours and the

BC-2000's full-charge indicator lights green.

•If the red charging indicator does not light even if

the wireless microphone has been inserted into the

charger, check to see if the microphone has been

correctly inserted.

•Thewirelessmicrophonebecomeswarmaftercharging

completion, however this is not a failure.

•When disconnecting the wireless microphone from

thecharger,rmlyholdthechargersothatitdoesnot

move.

For more information, see the instruction manual

enclosed with the BC-2000 Battery charger.

WM-D5200

Digital wireless microphone

BC-2000

Battery charger

Do not charge the unit with an alkaline dry battery installed.

Charge the dedicated rechargeable battery*.

Failuretoobservetheseinstructionscouldcausereorpersonal

injury due to a bursting battery.

* The optional TOA WB-2000-2 (package of 2).

CAUTION

10

7. OPERATION

Step 1. Conrmthatthewirelessmicrophoneandthewirelessreceiverareidenticalinthebank

and channel numbers

If not identical, turn the power switch to the OFF position, then set the bank and channel

numbers to the same ones as the receiver.

Step 2. TurnthePowerswitchtotheONposition.Then,conrmthebatterycheckerwilllightgreen

or orange.

Step 3. Turn the Power switch to the OFF position after use.

8. FUNCTION SETTINGS

8.1. Setting the Bank and Channel Numbers

Step 1. Switch off the power.

Step 2. Rotate the battery compartment cover

counterclockwise to detach it.

Step 3. Using the supplied screwdriver, set the

bank selector switch’s pointer to the desired

number, and set the channel selector switch’s

pointer likewise.

Step 4. Replace the battery compartment cover.

2

3

Screwdriver

(accessory)

11

8.2. Performing Encryption Settings

To enhance security, the WM-D5200 is provided with an encryption setting function that prevents

leakage of transmitted information.

This function also has the advantage of eliminating radio interference if enabled. Before enabling

theencryptionsetting,besurethatbankandchannelsettingsarecompletedrst.

Tip

In addition to the WM-D5200, the WT-D5800 Digital Wireless Receiver also requires setup.

Therefore, be sure to see the receiver's instruction manual as well.

8.2.1. Encryption settings summary

[Before use (preparatory operation for setting)]

Transmit an ID number from the wireless microphone to the receiver. The ID number is randomly

selected on the wireless microphone side. The ID number to be used is selected from an extensive

numberofcombinationsandcannotbedesignatedbytheoperator,norcanitbeidentiedfrom

outside.

[In use] (No operations required.)

When the receiver detects a signal from the wireless microphone, it simultaneously reads the

microphone's ID information, ensuring that only the audio of the wireless microphone assigned

with the same ID number as the receiver can be output. Even if the bank/channel numbers are

identically set in an attempt to enable reception of a radio signal from outside, since no audio is

output if the ID number does not match, the possibility of leakage of transmitted information to the

outside is quite low.

[Encryption setting ON/OFF confirmation]

Step 1. After removing the battery compartment cover, switch ON the microphone power switch.

Step 2. ConrmthestatusoftheEncryptionindicator.

The setting is ON when the indicator is lit, and OFF when the indicator is unlit.

Note: The encryption setting is factory-preset to OFF

1

2

Encryption setting switch

Encryption indicator

12

8.2.2. Performing encryption settings

[Switching the Encryption function from OFF to ON]

See also the instruction manual enclosed with the WT-D5800 receiver.

Step 1. Enable the receiver's encryption function.

Step 2. With the battery compartment cover removed, switch ON the

microphonepowerswitchandconrmthattheEncryptionindicator

is unlit.

If the indicator is lit, switch encryption from ON to OFF (see p. 13).

Step 3. Switch OFF the microphone power switch.

Step 4. Switch ON the microphone power switch while holding down the

microphone's Encryption setting switch (continue holding until Step

6).

Conrmthatthemicrophone'sEncryptionindicatorisashing.

An ID number is transmitted while the microphone's Encryption

setting switch is held down.

Step 5. Perform pairing setting at the receiver.

The receiver waits for the microphone’s transmitted ID number for

as long as the Set key is held down. The "RECEIVING" indication

is displayed on the receiver's LCD screen until the ID number is

correctly received.

Step 6. AfterconrmingthattheLCDdisplayhasswitchedtothe"SUCCESS"

indication, release both the microphone's Encryption setting switch

and the receiver's Set key.

Step 7. Conrmthatthemicrophone'sEncryptionindicatorislit.

The encryption setting is now ON.

Notes

•DonotswitchOFFthepowertothemicrophoneorreceiverduringsetting.

•Hold down the microphone's Encryption setting switch and the receiver's Set key until the

"SUCCESS" indication appears on the receiver's LCD screen.

If the microphone's Encryption setting switch or the receiver's Set key is released while the

"RECEIVING" indication is displayed on the receiver's screen, the receiver will not have correctly

received the new ID number, leaving the ID number unchanged from the previous value. To match

the receiver ID number with the microphone ID number, switch OFF the microphone's encryption

setting, then repeat Steps 1 – 7 above.

Tips

•TheIDnumberisupdatedwhentheencryptionisswitchedfromOFFtoONagain.(Theencryption

ON/OFF status and ID number are retained even if the power switch is switched OFF.)

•SettingscanbeperformedregardlessofwhetherthemicrophoneorreceiverEncryptionsetting

switchwasdepressedrst.

•ThereceiverdoesnotoutputaudioduringIDnumbersetting,evenifitreceivesaradiosignalfrom

the microphone.

Unlit

Flashing

Lit

13

Unlit

[Switching the Encryption function from ON to OFF]

Step 1. With the battery compartment cover removed, switch ON the

microphonepowerswitchandconrmthattheEncryptionindicator

is lit.

Step 2. Switch OFF the power switch.

Step 3. Switch ON the microphone power switch while holding down the

Encryption setting switch.

Note

Do not switch OFF the microphone power switch during setting.

Step 4. ConrmthattheEncryptionindicatorhasextinguished,thenrelease

the Encryption setting switch.

The encryption setting switches to OFF.

Lit

14

8.3. Performing Code Settings (When Encryption Function Is OFF)

8.3.1. Code Setting Summary

By presetting the specied code between thewireless microphone and receiver, audio is only

output when a digital signal received from the wireless microphone has the same ID code as the

receiver. Even if another signal is received from an adjacent area, if the code does not match, audio

is not output.

Ten varieties of code can be selected ([0] – [9]) for appropriate use, depending on circumstances.

8.3.2. Code settings

Code is factory-preset to "0."

Note

Switch OFF the microphone power switch when performing settings. If the power switch is left ON,

the codes will remain unaffected even if the settings are manually changed.

Step 1. After removing the battery compartment cover, switch ON

the microphone power switch.

Step 2. ConrmthattheEncryptionindicatorisunlit.

If it is lit, switch encryption from ON to OFF, referring to p.

12, "Switching the Encryption function from OFF to ON."

Step 3. Switch OFF the power.

Step 4. Using the supplied screwdriver, set the code setting switch to

the desired code number.

Step 5. Reinstall and securely tighten the battery compartment

cover, as it was before.

This puts the code into the set state.

Step 6. Set the same code number for the receiver, as well.

For the setting method, see the instruction manual enclosed

with the receiver.

1

2

4

Encryption indicator

Unlit

Code setting switch

15

8.4. Performing Transmission Output Changeover Switch Settings

Transmissioncanbesetforeitheroftwooutputs:‘H’(10mW)or‘L’(1mW).

Theswitchisfactory-presettothe‘H’position.

Note

Be sure to turn the microphone’s power switch OFF before performing settings.

Step 1. ConrmthatthepowerswitchisturnedOFF,thenremove

the battery compartment cover and battery.

Step 2. Using the supplied screwdriver, set the changeover

switch to the desired transmission output.

Set the switch to the ‘H’ position when using the

microphone in a wide area.

If the same bank and channel are used in close proximity

in adjacent locations, set the switch to the ‘L’ position

to shorten the radio wave transmission range for each

location to minimize interference.

Step 3. Reinsert the battery and securely replace the battery compartment cover.

1

2

1

H L

Screwdriver

(accessory)

Transmission output changeover switch

16

9. CONVENIENT FUNCTIONS (Microphone Sensitivity Selector Switch Settings)

Microphonesensitivitycanbesetto"0dB"(H)or"–10dB"(L).

Notes

•SwitchOFFthepowerswitchwhenselectingthesensitivity.

•Whenthesensitivityissetto"H,"avoidpositioningthemicrophonetooclosetothemouthand

speakinginaloudvoice,asthesoundcouldbecomemuddledanddifculttounderstand.

Step 1. Conrm that the power switch has been

switched off, then remove the battery

compartment cover.

Step 2. Using the supplied screwdriver, set the switch

to the desired sensitivity.

Step 3. Reinstall and securely tighten the battery

compartment cover, as it was before.

1

Microphone sensitivity selector switch

2

17

10. SPECIFICATIONS

Microphone Element Electret condenser unit: Unidirectional

Modulation type FSK

Version and

Frequency Range

WM-D5200-C4,-C7:794–832MHz

 (794–806MHzforThailand)

WM-D5200-G1: 606–636MHz

WM-D5200-H1: 576–606MHz

Channel Selectable 160 channels

(The number of channels may differ from country to country.)

RF Carrier Power Less than 50 mW

Maximum Input Level 132dBSPL(Sensitivity:L)/122dBSPL(Sensitivity:H)

Audio Frequency

Response

100Hz–12kHz

Antenna Built-in type

Dynamic Range Typ. 90 dB (when used with WT-D5800)

ID Selectable 10 patterns

Battery WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery

Battery Life Approx. 8 hours

Operating Temperature –10 to +50 °C (14 to 122 °F) (except battery)

OperatingHumidity 30to85%RH(nocondensation)

Finish Body: ABS resin, black, coating

Head:steel,black,paint

Dimensions ø47 × 239.5 mm (ø1.85" × 9.43")

Weight 220 g (0.49 lb) (with battery)

Note: Thedesignandspecicationsaresubjecttochangewithoutnoticeforimprovement.

• Accessories

Storage case ........................................................... 1

Screw driver (for setting) ......................................... 1

Microphone holder .................................................. 1

Note

The WM-D5200 cannot communicate with the TRANTEC Wireless System (S4 and S5 Series) nor

with the TOA Analog Wireless System (WT-5800, WT-5805, and WT-5810 etc.).

18

WM-D5200

DIGITALES DRAHTLOSMIKROFON

BEDIENUNGSANLEITUNG

WirdankenIhnenfürdenKaufdiesesdigitalenDrahtlosmikrofonsvonTOA.

Beachten Sie bitte die Anweisungen in dieser Bedienungsanweisung, um einen langen und störungsfreien

Betrieb des Geräts zu gewährleisten.

19

INHALTSVERZEICHNIS

1. SICHERHEITSHINWEISE

...................................................................................................... 20

2. ALLGEMEINE BESCHREIBUNG ......................................................................................... 21

3. LEISTUNGSMERKMALE ....................................................................................................... 21

4. VORSICHTSMASSNAHMEN BEI DER HANDHABUNG .................................................. 21

5. BEZEICHNUNGEN UND FUNKTIONEN ............................................................................. 22

6. VORBEREITEN DER BATTERIE .......................................................................................... 24

6.1. Einsetzen der Batterie ......................................................................................................... 24

6.2. Leitfaden zur Batterie-Betriebsdauer ................................................................................. 24

6.3. Bei Betrieb mit einem Akku ................................................................................................ 25

7. BEDIENUNG ............................................................................................................................ 26

8. FUNKTIONSEINSTELLUNGEN ............................................................................................ 26

8.1.EinstellenderFrequenzbank-undKanalnummer .............................................................. 26

8.2. Vornehmen von Verschlüsselungseinstellungen ............................................................... 27

8.3. Durchführen von Code-Einstellungen (bei deaktivierter Verschlüsselungsfunktion) ........ 30

8.4. Einstellen des Sendeleistungsumschalters ........................................................................ 31

9. WEITERE FUNKTIONEN (MIKROFONEMPFINDLICHKEITS-WÄHLSCHALTER) ....... 32

10. TECHNISCHE DATEN .......................................................................................................... 33

Zubehör .................................................................................................................................... 33

20

Beim Gebrauch des Geräts

•

Verwenden Sie zum Laden eines Akkus unbedingt

das spezielle Ladegerät. Bei Verwendung

eines anderen Ladegeräts kann die Batterie

auslaufen oder explodieren, was einen Brand,

eineKörperverletzung,einenSachschadenoder

Umweltverschmutzung zur Folge haben kann.

•

Das Gerät bitte nach Gebrauch immer

ausschalten. Insbesondere ist darauf zu achten,

dasseszukeinergegenseitigenBeeinussung

mit medizintechnischen Geräten kommt.

Beim Gebrauch des Geräts

•Wenn das Gerät voraussichtlich 2 Wochen

oder länger nicht gebraucht wird, entfernen

Sie unbedingt die Batterien aus dem Gerät, da

diese anderenfalls auslaufen und einen Brand,

eine Verletzung oder Umweltverschmutzung

verursachen könnte.

•AchtenSiedarauf,dassbeiderHandhabung

die nachstehenden Vorsichtsmaßregeln

eingehalten werden, um einen Brand oder

eine Verletzung durch Auslaufen oder

Bersten der Batterie zu vermeiden.

· Die Batterie nicht kurzschließen, zerlegen,

erhitzen oder verbrennen.

· Neue und alte Batterien nicht zusammen

verwenden.

· Niemals versuchen, Batterien zu laden.

· Batterien nicht fest anlöten.

· Unbedingt eine Batterie des vorgeschriebenen

Typs verwenden.

· Beim Einlegen der Batterie in das Gerät auf

korrekte Ausrichtung der Batteriepole (Plus

und Minus) achten.

· Batterien nicht an Orten aufbewahren, wo sie

direktem Sonnenlicht, hohen Temperaturen

und hoher Luftfeuchtigkeit ausgesetzt sind.

Legen Sie keine Batterien in das Ladegerät

ein.

Wenn Batterien in das Ladegerät gelegt

werden, können sie explodieren und einen

Brand und/oder eine Verletzung verursachen.

Verwenden Sie zum Wiederauaden

ausschließlich das Ladegerät BC-2000 und

den Akku WB-2000.

Verwenden Sie keine anderen Batterietypen.

Sollte die Batterie anschwellen oder auslaufen,

sehen Sie sofort von einer weiteren Nutzung

ab und ersetzen sie durch eine neue.

Sollte sich beim Laden der Batterie Rauch und/

oder ein ungewöhnlicher Geruch entwickeln,

schalten Sie das Gerät unverzüglich aus.

WARNHINWEIS:

DerVersuch,ÄnderungenoderModikationen

am Gerät vorzunehmen, die nicht von der

zuständigen Stelle genehmigt wurden, kann

zu Schäden am Gerät und zum Erlöschen der

Betriebserlaubnis für das Gerät führen.

Macht auf eine potenziell gefährliche Situation aufmerksam.

Die Nichtbeachtung der Warnhinweise kann zu Verletzungen,

möglicherweise auch mit tödlichem Ausgang, führen.

WARNUNG

1. SICHERHEITSHINWEISE

•Lesen Sie vor der Inbetriebnahme unbedingt alle Anweisungen in diesem Abschnitt

aufmerksam durch, damit ein korrekter und sicherer Betrieb gewährleistet ist.

•Folgen Sie unbedingt allen Vorsichtsmaßregeln in diesem Abschnitt, die wichtige, die

Sicherheit betreffende Warn- und/oder Vorsichtshinweise enthalten.

•BewahrenSiedieseAnleitungnachdemLesenzurspäterenBezugnahmegriffbereitauf.

Macht auf eine potenziell gefährliche

Situation aufmerksam. Die Nichtbeachtung

dieserHinweisekannzuleichten

Verletzungen oder Sachschäden führen.

ACHTUNG

La pagina si sta caricando...

TOA WM-D5200 -C4/-C7/-G1/-H1 Manuale utente

TOA WM-D5200 -C4/-C7/-G1/-H1 Manuale utente

in altre lingue

Documenti correlati

Altri documenti