Canon XF705 Manuale utente

4K Camcorder

Instruction Manual

PUB. DIE-0524-000A

2

COPYRIGHT WARNING:

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be

contrary to copyright laws.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries.

• Apple, macOS are trademarks of Apple Inc., registered in the U.S. and other countries.

• Avid and Media Composer are trademarks or registered trademarks of Avid Technology, Inc. or its

subsidiaries in the United States and/or other countries.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.

• WPS as used on the camcorder’s settings, onscreen displays and in this manual signifies Wi-Fi Protected

Setup.

• The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance.

• JavaScript is a trademark or registered trademark of Oracle Corporation, its affiliates or subsidiaries in the

United States and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

• Other names and products not mentioned above may be trademarks or registered trademarks of their

respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding

MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal

and noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4

compliant video. No license is granted or implied for any other use for MPEG-4 standard.

• ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT

COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED

MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2

PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET,

SUITE 300, DENVER, COLORADO 80206.

3

Highlights of the XF705

The Canon XF705 4K Camcorder is a high-performance camcorder whose advanced functionality and versatile

usability make it the perfect choice for a variety of 4K productions. The following are just some of the functions

featured in the camcorder.

4K Recording System

Advanced sensor and image processor

At the heart of the camcorder is the type 1.0 (1.0 in.)

single plate CMOS sensor with an 8,290,000

effective pixel count, and an image processing

platform with two DIGIC DV 6 processors. Thanks to

its advanced high-sensitivity and noise reduction

technology, the camcorder can shoot nuanced

images with little noise even in low-light situations.

High-efficiency encoding: XF-HEVC and XF-AVC

You can choose the movie format according to your

workflow needs. You can record using the H.265/

HEVC codec or MPEG-4 AVC/H.264 codec, both of

which are recorded as MXF (Material eXchange

Format) clips. MXF clips are compatible with all

major non-linear (NLE) editing software, offering a

smoother post-production workflow.

With the H.265/HEVC codec, you can use YCC422,

10-bit color sampling and select 4K (3840x2160) or

Full HD (1920x1080) resolution and a variety of

frame rates and bit rates. With the MPEG-4 AVC/

H.264 codec, you can record only at Full HD

resolution using YCC420, 8-bit color sampling. In

both cases, audio is recorded as 4-channel linear

PCM (24 bit, 48 KHz) audio.

Operability and Adaptability

Versatile design

The camcorder was designed to be operated

comfortably by a single camera operator. It features

3 separate rings for independent focus, zoom and

iris operation. The camcorder also features 14

buttons to which you can assign a large number of

functions (A 117) to personalize the camcorder to

your needs and preferences.

Improved displays

The camcorder features a 4.0-in. LCD display

(equivalent to 1,230,000 dots) that offers 100%

coverage and touch-to-focus functions. The LCD

panel can open to the left or right. The viewfinder

offers an OLED display (also with 100% coverage)

and a large eye cup for a comfortable fit in various

shooting conditions.

SD card recording options

The camcorder can record 4K video on SD cards,

offering great cost-performance in terms of

recording media. It is equipped with 2 card slots,

allowing you to use double slot recording to record

the same clip on two cards, or relay recording to

automatically switch to the other card when the one

being used is full (A 36).

Versatile Artistic Expression

Special recording modes

The special recording modes (A 113) give you

more creative control over your recordings. You can

change the shooting frame rate to achieve a slow

motion effect

1

or use pre-recording to record 3

seconds before you press the button, helping you

capture those hard-to-catch opportunities.

Custom picture settings (A 63, 121)

Select one of the preset color settings or set the

combination of gamma curve, color space and color

matrix that you wish to use. Then, you can adjust a

number of other image-related parameters in detail.

With wide color space options such as BT.2020

Gamut, the Canon Log 3 gamma curve, which

keeps the characteristics of the Canon Log gamma

while expanding the dynamic range, and two HDR

options

1

(HLG or PQ), you can be sure that the

camcorder covers your creative needs.

1

For XF-HEVC clips only.

Professional Functions and Flexibility

Network functions

Connect the camcorder to a Wi-Fi or wired

(Ethernet) network to enjoy various network

functions

2

. You can, for example, use a Wi-Fi

capable mobile device to control the camcorder

remotely with the Browser Remote application

(A 162), stream live transmissions or breaking

images via IP (A 173) and transfer recordings from

an SD card to a remote server using the FTP

protocol (A 176).

2

Available functions depend on the network connection

used.

Software for aiding production workflow

Canon XF Utility (A 151) lets you copy the clips you

recorded from an SD card to a computer, play back

the clips and organize them. You can also use the

Canon XF plugins to work with the clips directly from

non-linear editing (NLE) software made by Avid.

4

Pro-level connectivity

The camcorder is equipped with an SDI terminal

compliant with the 12G-SDI standard that provides

a greater bandwith and supports 4K video output at

59.94P or 50.00P frame rate. Meanwhile, the TIME

CODE terminal and G-LOCK/SYNC terminal offer

many synchronization options (A 92), allowing the

camcorder to be part of any multi-camera shooting

setup.

Infrared recording

Record in darkness using infrared recording

(A 116). With the built-in infrared light, you can

record nocturnal animals in their natural environment

or other such scenes.

Enhanced Focusing Options

Dual Pixel CMOS AF

The camcorder features Dual Pixel CMOS AF

technology for improved autofocus functions

(A 74). In addition to continuous AF, AF-boosted

MF lets you focus manually most of the way and let

the camcorder finish focusing automatically. With

AF-boosted MF the camcorder does not perform

unreliable focus adjustments, resulting in a more

stable focusing operation than with continuous AF.

The camcorder can also focus automatically on

people's faces and track moving subjects while

keeping them in focus (A 79).

Dual Pixel Focus Guide (A 75)

The focus guide serves as a visual, intuitive guide

that you can use to check if the image is in focus

and the required adjustment, if it is not. This can be

very helpful to ensure you always get amazingly

sharp 4K video.

Other improved features

• Direct setting mode (A 52)

Change main camcorder functions while checking

the image on the screen using only the joystick.

• Assistance functions

You can use assistance functions such as peaking

and magnification (A 76), onscreen markers

(A 85), zebra patterns (A 86), B&W image

(A 30) and a waveform monitor (A 105) on the

screen and viewfinder. You can also display them

on an external monitor connected to the SDI

terminal or HDMI OUT terminal

3

.

Additionally, when using a logarithmic gamma

curve, you can also apply a LUT (A 147) for

easier monitoring.

3

Available assistance functions depend on the screen/video

output used.

• Customizable onscreen displays (A 44).

• Menu settings file that can be saved in the

camcorder or on an SD card to restore all the

menu settings or replicate them on another XF705

camcorder (A 129).

• Battery packs compatible with Intelligent System

for better remaining usage time information.

• INPUT terminals (XLR) compatible with analog or

digital (AES/EBU) audio and +48 V phantom

power supply (A 98).

• Improved clip name format with more information

for easier identification and organization of clips

(A 48).

• Metadata (A 108) and geotagging (A 110).

• Color bars and test tone output and recording

(A 104).

• Advanced remote operation using the optional

RC-V100 Remote Controller (A 39).

5

1. Introduction 9

About this Manual 9

Conventions Used in this Manual 9

Supplied Accessories 10

Names of Parts 11

Camcorder 11

WL-D6000 Wireless Controller 18

2. Preparations 19

Preparing the Power Supply 19

Using a Battery Pack 19

Using a Power Outlet 21

Turning the Camcorder On and Off 22

Date, Time and Language Settings 23

Setting the Date and Time 23

Changing the Language 24

Using the Menus 25

Selecting an Option from the Menu 25

Using the Customized Submenu (My Menu) 26

Preparing the Camcorder 28

Attaching the Microphone Holder Unit 28

Attaching the Lens Hood 28

Using the Viewfinder 28

Using the LCD Screen 29

Adjusting the LCD Screen or Viewfinder 30

Adjusting the Grip Belt 31

Attaching the Shoulder Strap 31

Removing and Attaching the Terminal Covers 31

Removing the Shoulder Pad 32

Using a Tripod 32

Using SD Cards 33

Compatible SD Cards 33

Inserting and Removing an SD Card 34

Initializing an SD Card 35

Switching Between the SD Card Slots 35

Relay Recording and Double Slot Recording 36

Checking the Remaining Recording Time on SD

Cards 36

Recovering Clips 37

Remote Operation of the Camcorder 38

Using the Supplied Wireless Controller 38

Using the Optional RC-V100 Remote

Controller 39

3. Recording 41

Recording Video 41

Preparing to Record 41

Recording 42

Onscreen Displays 44

Setting the Clip File Name 48

Using the Fan 49

Video Configuration: Video Format, System

Frequency, Frame Rate, Resolution and Bit

Rate 50

Selecting the Main Recording Format 50

Selecting the System Frequency 50

Selecting the Frame Rate 50

Selecting the Resolution and Color Sampling

Settings 51

Selecting the Bit Rate 51

Changing Main Functions with the FUNC

Button 52

Using the Direct Setting Mode 52

Shutter Speed 53

Changing the Shutter Speed Mode 53

Changing the Shutter Speed Value 55

Flicker Reduction 55

Gain 56

Automatic Gain Control 56

Selecting the Gain Level 57

Changing the Gain Value 57

ND Filter 58

Aperture 59

Automatic Aperture 59

Momentary Automatic Aperture - Push Auto

Iris 60

Manual Aperture 60

Iris Limit 61

Exposure Compensation - AE Shift 61

Light Metering Mode 62

Gamma Curve and Main Color Settings 63

Preset Color Settings 63

White Balance 65

Auto White Balance (AWB) 66

Color Temperature/Preset White Balance 66

Adjusting White Balance Settings 67

Custom White Balance 67

Table of Contents

6

Zooming 68

Selecting the Zoom Mode 68

Selecting the Zoom Controls 69

Using the Zoom Ring 69

Using the Grip Zoom Rocker 69

Using the Handle Zoom Rocker 71

Using the Supplied Wireless Controller or an

Optional Remote Controller 71

Using Optional Conversion Lenses 73

Adjusting the Focus 74

Manual Focus 74

Push AF 77

AF-Boosted MF 77

Continuous AF 78

Changing the AF Frame Size and Position 79

Face Detection 79

Tracking a Specific Subject 81

Focus Limit and Macro Shooting 82

Image Stabilization 83

Dynamic IS or Standard IS 83

Powered IS 83

Onscreen Markers and Zebra Patterns 85

Displaying Onscreen Markers 85

Displaying Zebra Patterns 86

Setting the Time Code 88

Selecting the Time Code Mode 88

Selecting Drop or Non-Drop Frame 89

Putting the Time Code Display on Hold 89

Setting the User Bit 91

Synchronizing with an External Device 92

Connecting an External Device 92

Reference Video Signal Input (Genlock

Synchronization) 92

Time Code Signal Input 93

Reference Video Signal Output 94

Time Code Signal Output 94

Recording Audio 95

Audio Settings and Recorded Audio Channels 95

Connecting an External Microphone or External

Audio Input Source to the Camcorder 97

Setting the Audio Input Type for the INPUT 1/

INPUT 2 Terminals 98

Selecting the Audio Input Source for Audio

Channels 98

Adjusting the Audio Recording Level 99

Advanced Audio Input Settings 101

Monitoring the Audio with Headphones 103

Colors Bars/Audio Reference Signal 104

Color Bars 104

Audio Reference Signal 104

Waveform Monitor 105

Displaying the Waveform Monitor 105

Configuring the Waveform Monitor 105

Adding Marks to Clips while Recording 107

Adding Shot Marks while Recording 107

Adding an $ Mark or % Mark to the Last Clip

Recorded 107

Using Metadata 108

Setting a User Memo Created with Canon XF

Utility 108

Entering Slate Information About the

Recording 109

Recording GPS Informat

ion (Geotagging) 110

Connecting the GPS Receiver 110

Reviewing a Recording 112

Special Recording Modes 113

Slow Motion Recording 113

Pre-recording 114

Infrared Recording 116

7

4. Customization 117

Assignable Buttons 117

Changing the Assigned Function 117

Assignable functions 118

Custom Picture Settings 121

Selecting Custom Picture Files 121

Editing a Custom Picture File’s Settings 121

Resetting Custom Picture Files 122

Renaming Custom Picture Files 122

Protecting Custom Picture Files 122

Copying Custom Picture Files 123

Embedding the Custom Picture File in Clips 123

Available Custom Picture Settings 124

Saving and Loading Camcorder Settings 129

Saving Camcorder Settings 129

Loading Camcorder Settings 129

5. Playback 131

Playback 131

Clip Index Screen 131

Switching Index Screens 132

Playing Back Clips 133

Onscreen Displays 134

Playback Controls 135

Adjusting the Volume 136

Clip Operations 137

Using the Clip Menu 137

Displaying Clip Information 138

Adding $ Marks or % Marks 139

Deleting $ Marks or % Marks 139

Copying Clips 139

Deleting Clips 140

Deleting the User Memo and GPS

Information 140

Adding and Deleting Shot Marks 141

6. External Connections 143

Video Output Configuration 143

Recording Video Signal Configuration and Video

Output Configuration by Terminal 143

Connecting to an External Monitor 145

Using the SDI Terminal 145

Using the HDMI OUT Terminal 146

Superimposing Onscreen Displays on Video

Outputs 146

Applying a LUT to Screens/Video Outputs 147

Adjusting the Color Quality for HLG Output 149

Adjusting the Gain Difference between HDR and

SDR 149

Selecting the Output Range 149

Audio Output 150

Working with Clips on a Computer 151

Saving Clips to a Computer 151

7. Network Functions 153

About the Network Functions 153

Connecting to a Wi-Fi Network 154

Camera Access Point 155

Connecting in Infrastructure Mode 156

Wi-Fi Protected Setup (WPS) 156

Searching for Access Points 157

Manual Setup 158

Connecting to a Wired (Ethernet) Network 159

Selecting a Network Connection 160

Checking the Network’s Status 160

Changing Network Settings 161

Browser Remote: Controlling the Camcorder from

a Network Device 162

Setting Up Browser Remote 162

Starting Browser Remote 163

Using Browser Remote 164

IP Streaming 173

IP Streaming Settings 173

Streaming Video over IP 174

FTP File Transfer 176

FTP Server and Transfer Settings 176

Transferring Clips (FTP Transfer) 177

8

8. Photos 179

Taking Photos 179

Photo Numbering 179

Playing Back Photos 181

Displaying the [Photos] Index Screen 181

Viewing Photos 181

Deleting Photos 182

Deleting a Single Photo 182

Deleting All the Photos 182

9. Additional Information 183

Menu Options 183

Displaying the Status Screens 195

Troubleshooting 204

List of Messages 209

Safety Instructions and Handling Precautions 213

Maintenance/Others 217

Optional Accessories 218

Specifications 220

Reference Tables 224

Approximate Recording Time on an SD Card 224

Charging Times 224

Approximate Recording Times with a Fully

Charged Battery Pack 224

Index 226

1

9

Introduction

About this Manual

Thank you for purchasing the Canon XF705. Please read this manual carefully before you use the camcorder and

retain it for future reference. Should the camcorder fail to operate correctly, refer to Troubleshoot ing (A 204).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number.

• The following terms are used in this manual.

"Screen" refers to the LCD screen and the viewfinder screen.

"Card" refers to an SD, SDHC or SDXC card.

When not specified, "access indicator" refers to either or both of the SD card access indicators (SD CARD2/

SD CARD3).

"Clip" refers to a single movie unit recorded with a single recording operation (for example, from the point when

the REC button is pressed to start recording until it is pressed again to stop).

• Photographs in the manual are simulated pictures taken with a still camera. Some screenshots have been

altered to make them easier to read.

• Operating mode icons: These icons indicate the camcorder's two operating modes (A 22). A shaded icon

(like ) indicates that the function described can be used in the operating mode shown; a non-shaded icon

(like ) indicates that the function cannot be used.

• The following style is used to represent menu selections. For a detailed explanation on how to use the menus,

refer to Using the Menus (A 25). For a summary of all available menu options and settings, refer to Menu

Options (A 183).

Operating modes:

Brackets [ ] indicate text as it appears on the

camcorder's screen (menu options, onscreen

buttons, messages, etc.).

This arrow indicates a deeper

level in the menu hierarchy or

the next step in a procedure.

1 Select [Rec Format].

> [

Æ

! Recording/Media Setup] > [Rec Format]

2 Select [XF-HEVC] or [XF-AVC] and then press SET.

Supplied Accessories

10

Supplied Accessories

The following accessories are supplied with the camcorder.

Shoulder Pad* Lens Hood with Lens Barrier Microphone Holder CA-CP200 L Compact Power Adapter

(incl. power cord)

CG-A20 Battery Charger BP-A30 Battery Pack

(incl. terminal cover)

Eye Cup Viewfinder Cap

Lens Cap* SS-1200 Shoulder Strap WL-D6000 Wireless Controller

(incl. CR2025 Lithium Battery)

Quick Guide

* Comes pre-attached to the camcorder.

11

Names of Parts

Camcorder

13

45 6 78 9 1011121314 15

2

1 Air intake vent (A 49)

2 Focal plane mark

3 ZOOM SPEED (zoom speed of the handle's zoom

rocker) switch (A 71)

4 Lens hood (A 28)

5 Lens barrier switch (A 41)

6 Focus ring (A 74)

7 Zoom ring (A 69)

8 Iris ring (A 60)

9 SHUTTER (shutter speed mode) switch (A 53)

10 PUSH AUTO IRIS (momentary automatic aperture)

button (A 60)

11 GAIN switch (A 57)

12 WHITE BAL. (white balance) switch (A 65)

13 Å (white balance adjustment) button (A 67, 67)

14 Card slot covers (A 34): SD CARD2 (top) and

SD CARD3 (bottom)

15 Protective cover for audio controls (A 95)

Names of Parts

12

1

2345

6

7

8

14 15

16 17 18 19

910 111213

p15

1 ND FILTER +/– buttons (A 58)

2 PUSH AF (momentary autofocus) button (A 77)

3 FOCUS (focus mode) switch (A 74)

4 POWERED IS button (A 83)/

Assignable button Camera 1 (A 117)

5 PEAKING button (A 76)/

Assignable button Camera 2 (A 117)

6 INFRARED switch (A 116)

7FULL AUTO switch (A 43)

8 AWB (auto white balance) switch (A 66)

9 IRIS (aperture mode) switch (A 59)

10 ZOOM (zoom control selection) switch (A 69)

11 WFM (waveform monitor) button (A 105)/

Assignable button Camera 4 (A 117)

12 ZEBRA button (A 86)/

Assignable button Camera 3 (A 117)

13 AGC (automatic gain control) switch (A 56)

14 SLOT SELECT (SD card selection) button

(A 35, 132)

15

–

(audio level) switches for CH1 (top) and

CH2 (bottom) (A 99)

16 SD card slots (A 34): SD CARD2 (top) and

SD CARD3 (bottom)

In this manual, SD cards in each slot are referred

to as “SD card A” and “SD card B”, respectively.

17 Card access indicators (A 34): SD CARD2 (top)

and SD CARD3 (bottom)

18 AUDIO STATUS (display the [Audio] status

screens) button (A 198)

19

–

(audio level) dials for CH1 (top) and CH2

(bottom) (A 100)

13

Names of Parts

1

8 9 10 11 12

23 4 5 6 7

1 Strap mount (A 31)

2 INPUT 2 (audio input selection) switch (A 98)

3 ANALOG (analog audio source selection) switch

for INPUT 2 (A 98)

4Grip belt (A 31)

5 INPUT 1 (audio input selection) switch (A 98)

6 ANALOG (analog audio source selection) switch

for INPUT 1 (A 98)

7 Screw holes for the microphone holder fixation

bolts (A 28)

8 Exhaust ventilation outlet (A 49)

9 INPUT 1 terminal (XLR) (A 97)

10 MIC (microphone) terminal (A 97)

11 USB terminal (A 110)

12 Lens hood lock screw (A 28)

Names of Parts
14
123 456
21
7
13
14
15
16
17
18
19
20
8
9
10
11
12
22
23 24 25
26
1 Built-in stereo microphone (A 95)
2 Accessory shoe
For attaching accessories such as the optional 
VL-10Li II Battery Video Light.
3 Rear tally lamp (A 42)
4 Grip zoom rocker (A 69)
5 MAGN. (magnification) button (A 76)/
Assignable button Camera 6 (A 117)
6 u (review recording) button (A 112)/
Assignable button Camera 5 (A 117)
7 Ø (fast reverse playback) button (A 135)/
Assignable button Camera 8 (A 117)
8 Ú (skip backward) button (A 135)/
Assignable button Camera 11 (A 117)
9 Ñ (stop) button (A 133)/
Assignable button Camera 12 (A 117)
10 INDEX button (A 132)
11 Joystick and SET button (A 25)
12 Handle zoom rocker (A 71)
13 × (fast playback) button (A 135)/
Assignable button Camera 10 (A 117)
14 Ò (play/pause) button (A 133)/
Assignable button Camera 9 (A 117)
15 Ù (skip forward) button (A 135)/
Assignable button Camera 13 (A 117)
16 MENU button (A 25)
17 CANCEL button (A 25)
18 Handle REC button's lock lever (A 42)
19 REC (start/stop recording) button (A 42)
20 MAGN. (magnification) button (A 76)/
Assignable button Camera 7 (A 117)
21 Built-in speaker (A 1
36)
Located on the upper surface of the space where 
the LCD panel is stored.
22 Strap mount (A 31)
23 MEDIA (playback mode) button (A 22, 131)
24
Q
 switch (A 22)
25 Accessory socket
For mounting accessories with 1/4"-20 screws 
(6.9 mm (0.27 in.) deep).
26 KEY LOCK (camcorder's key lock function) switch 
(A 43)

15

Names of Parts

12

34

1 Attachment sockets for the optional TA-100 Tripod

Adapter (A 32)

2 Mounting sockets and screw hole for the shoulder

pad (A 32)

3 Screw hole for 1/4"-20 mounting screws

(8.8 mm (0.35 in.) deep) (A 32)

4 Screw hole for 3/8"-16 mounting screws

(10 mm (0.39 in.) deep) (A 32)

Names of Parts

16

1

2

3

5 6

4

7

9

8

1 Microphone lock screw (A 97)

2 Microphone holder (A 97)

3 Microphone cable clamp (A 97)

4 Air intake vent (A 49)

5Front tally lamp (A 42)

6Remote sensor (A 38)/

Infrared light (A 116)

7 MIRROR (invert the displayed image) button

(A 29)

8 Lens barrier (A 41)

9 Assignable button Camera 14 (A 117)

17
Names of Parts
1
13
14
15
16
17
18
19
20
21
22
23
24
25
26
2
3
4
5
6
7
8
9
10
11
12
1 Viewfinder (A 28, 30)
2Eye sensor (A 28)
3Eye cup (A 29)
4 LCD panel with touch screen (A 29, 30)
5 Dioptric adjustment lever (A 28)
6 BATTERY RELEASE button (A 21)
7 MENU button (A 25)
8 FUNC (main functions) button (A 52)
9 CUSTOM PICT. (custom picture) button (A 63, 
121)
10 STATUS (display status screen) button (A 195)
11 DISP (display) button (A 44, 134)
12 Battery compartment (A 20)/
Model identification label
13 REC (start/stop recording) button (A 42)
14 Joystick and SET button (A 25)
15 CANCEL button (A 25)
16 INPUT 2 terminal (XLR) (A 97)
17 SDI terminal (A 143, 145)
18 TIME CODE terminal (A 93, 94)
19 G-LOCK/SYNC terminal (A 92, 94)
20
×
 (headphone) terminal (A 103, 136)
21 REMOTE B terminal
For connecting the optional RC-V100 Remote 
Controller (A 39).
22  (Ethernet) indicator (A 159)
23  (Ethernet) terminal (A 159)
24 HDMI OUT terminal (A 143, 146)
25 REMOTE A terminal
For connecting the optional RC-V100 Remote 
Controller (A 39) or commercially available 
remote controllers.
26 DC IN terminal (A 21)

Names of Parts

18

WL-D6000 Wireless Controller

1

9

10

11

12

13

14

2

3

4

5

6

7

8

1 Record enable button: When you use the START/

STOP button or ZOOM buttons, you must press

this button simultaneously with the desired button.

2 PHOTO button (A 179)

3 SHOT1 (shot mark 1) button (A 107, 141)

4 CANCEL button (A 25)

5 SET button (A 25)

6 INDEX button (A 132)

7 Ò (play/pause) button (A 133)

8 Ñ (stop) button (A 133)

9 START/STOP (start/stop recording) button

(A 42)

10 ZOOM T/W buttons (A 71)

11 á/â/à/ß buttons

12 MENU button (A 25)

13 Ø/× (fast playback reverse/forward) buttons

(A 135)

14 Ô/Ó (frame reverse/advance) buttons

(A 135)

2

19

Preparations

Preparing the Power Supply

You can power the camcorder using a battery pack or directly using the compact power adapter. If you connect

the compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw power

from the power outlet.

Using a Battery Pack

You can power the camcorder using the supplied BP-A30 Battery Pack or the optional BP-A60 Battery Pack.

Both battery packs are compatible with Intelligent System so you can check the approximate remaining battery

usage time (in minutes) on the screen. For more accurate readings, when using a battery pack for the first time,

charge it fully and then use the camcorder until the battery pack is completely exhausted.

Charging the Battery Pack

Charge battery packs using the supplied CG-A20 Battery

Charger and CA-CP200 L Compact Power Adapter, or using an

optional CG-A10 Battery Charger. Before charging, remove the

terminal cover of the battery pack.

1 Connect the power cord to the supplied CA-CP200 L

Compact Power Adapter.

2 Plug the compact power adapter's power cord into a power

outlet.

3 Connect the compact power adapter's DC plug to the battery

charger.

4 Attach the battery pack to the battery charger.

• Press lightly and slide the battery pack in the direction of

the arrow until it clicks.

• The CHARGE indicator starts flashing and also indicates

the battery pack’s approximate charge. The indicator will

stay on when charging has completed.

approx. 0% to 49%: Flashes once every 2 seconds

approx. 50% to 74%: Flashes twice every 2 seconds

approx. 75% to 99%: Flashes 3 times every 2 seconds

5 When the battery pack is fully charged, remove it from the battery charger.

6 Disconnect the DC plug from the battery charger.

7 Unplug the power cord from the power outlet and disconnect the power cord from the compact power

adapter.

IMPORTANT

• Do not connect to the battery charger any product that is not expressly recommended for use with this

camcorder.

• When using the battery charger or compact power adapter, do not fix it permanently to one place as this may

cause a malfunction.

햵

햲

햴

햳

CHARGE indicator

Compact power adapter

Preparing the Power Supply

20

• We recommend charging the battery pack in temperatures between 10 ºC and 30 ºC (50 ºF and 86 ºF).

Outside the temperature range of 0 ºC to 40 ºC (32 ºF to 104 ºF), charging will not start.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied battery charger or

compact power adapter to voltage converters for overseas travels or special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

NOTES

• If there is a malfunction with the battery charger, compact power adapter or battery pack, the charge indicator

will go out and charging will stop.

• For handling precautions regarding the battery pack, refer to Battery Pack (A 214).

• For approximate charging times and recording times with a fully charged battery pack, refer to the Reference

Tabl es (A 224).

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day

before, to ensure a full charge.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

• Repeatedly charging and discharging the battery pack will eventually shorten its battery life. You can check the

battery life on the [Battery/Hour Meter] status screen (A 201). Fully charging the battery pack and then

discharging it completely will give you a more accurate reading.

Attaching the Battery Pack

1 Press and hold the button on the

Q

switch and set

the switch to OFF.

2 Insert the battery pack all the way into the compartment as

shown in the illustration and press it gently down until it

clicks.

햲

햳

La pagina sta caricando ...

Canon XF705 Manuale utente

Questo manuale è adatto anche per

Canon XF705 Manuale utente

in altre lingue

Documenti correlati

Altri documenti