ASROCK H55DE3 Manuale utente

11

1

ASRock H55DE3 Motherboard

EnglishEnglish

English

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published March 2010

22

2

ASRock H55DE3 Motherboard

EnglishEnglish

English

Motherboard LayoutMotherboard Layout

Motherboard Layout

1 ATX 12V Power Connector (ATX12V1) 18 USB 2.0 Header (USB8_9, Blue)

2 PS2_USB_PWR1 Jumper 19 USB 2.0 Header (USB6_7, Blue)

3 CPU Fan Connector (CPU_FAN1) 20 Chassis Speaker Header

4 1156-Pin CPU Socket (SPEAKER 1, Purple)

5 2 x 240-pin DDR3 DIMM Slots 21 System Panel Header (PANEL1, Orange)

(Dual Channel: DDR3_A2, DDR3_B2, Blue) 22 TPM Header (TPM1)

6 2 x 240-pin DDR3 DIMM Slots 23 Infrared Module Header (IR1)

(Dual Channel: DDR3_A1, DDR3_B1, White) 24 COM Port Header (COM1)

7 ATX Power Connector (ATXPWR1) 25 HDMI_SPDIF Header

8 16Mb SPI Flash (HDMI_SPDIF1, Yellow)

9 Intel H55 Chipset 26 Front Panel Audio Header

10 Chassis Fan Connector (CHA_FAN1) (HD_AUDIO1, Lime)

11 USB 2.0 Header (USB10_11, Blue) 27 PCI Slots (PCI1-2)

12 Fourth SATAII Connector (SATAII_4, Red) 28 PCI Express 2.0 x16 Slot (PCIE4, White)

13 Secondary SATAII Connector (SATAII_2, Red) 29 PCI Express 2.0 x1 Slot (PCIE3, White)

14 Primary SATAII Connector (SATAII_1, Red) 30 PCI Express 2.0 x16 Slot (PCIE2, Blue)

15 Third SATAII Connector (SATAII_3, Red) 31 PCI Express 2.0 x1 Slot (PCIE1, White)

16 Clear CMOS Jumper (CLRCMOS1) 32 Power Fan Connector (PWR_FAN1)

17 Chassis Intrusion Header (CI1)

33

3

ASRock H55DE3 Motherboard

EnglishEnglish

English

I/O PI/O P

I/O P

anelanel

anel

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Line In

(No. 8) (No. 5) (No. 4) (No. 7)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 USB 2.0 Ports (USB45) ** 8 Front Speaker (Lime)

2 VGA/D-Sub Port 9 Microphone (Pink)

* 3 LAN RJ-45 Port 10 USB 2.0 Ports (USB01)

4 Central / Bass (Orange) 11 Powered eSATAII/USB Connectors

5 Rear Speaker (Black) 12 HDMI Port

6 Optical SPDIF Out Port 13 VGA/DVI-D Port

7 Line In (Light Blue) 14 PS/2 Keyboard Port (Purple)

44

4

ASRock H55DE3 Motherboard

EnglishEnglish

English

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on

your system. Please follow below instructions according to the OS you install.

For Windows

®

XP / XP 64-bit OS:

Please click “VIA HD Audio Deck” icon. Click “Jack” and then click “Configuration”. In

“Configuration” screen, please check the item “Independent Headphone”.

For Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS:

Please click “VIA HD Audio Deck” icon. Click “Advanced Options” on the right side on the

bottom. In “Advanced Options” screen, please check the item “Independent Headphone”.

55

5

ASRock H55DE3 Motherboard

1. Introduction1. Introduction

1. Introduction

Thank you for purchasing ASRock H55DE3 motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-step

installation guide. More detailed information of the motherboard can be found in the user

manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents1.1 Package Contents

1.1 Package Contents

ASRock H55DE3 Motherboard

(ATX Form Factor: 12.0-in x 8.3-in, 30.5 cm x 21.1 cm)

ASRock H55DE3 Quick Installation Guide

ASRock H55DE3 Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

EnglishEnglish

English

66

6

ASRock H55DE3 Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - ATX Form Factor: 12.0-in x 8.3-in, 30.5 cm x 21.1 cm

- Solid Capacitor for CPU power

CPU - Supports Intel

®

Core

TM

i7 / i5 / i3 and Pentium

®

G6950

Processors in LGA1156 Package

- 4 + 1 Power Phase Design

- Supports Intel

®

Turbo Boost Technology (see CAUTION 1)

- Supports Hyper-Threading Technology (see CAUTION 2)

- Supports Untied Overclocking Technology (see CAUTION 3)

- Supports EM64T CPU

Chipset - Intel

®

H55

Memory - Dual Channel DDR3 Memory Technology (see CAUTION 4)

- 4 x DDR3 DIMM slots

- Supports DDR3 2600+(OC)/2133(OC)/1866(OC)/1600/

1333/1066 non-ECC, un-buffered memory

- Max. capacity of system memory: 16GB (see CAUTION 5)

- Supports Intel

®

Extreme Memory Profile (XMP)

(see CAUTION 6)

Expansion Slot - 1 x PCI Express 2.0 x16 slot (at x16 mode)

- 1 x PCI Express 2.0 x16 slot (at x4 mode, 2.5GT/s)

- 2 x PCI Express 2.0 x1 slots (2.5GT/s)

- 2 x PCI slots

- Supports ATI

TM

CrossFireX

TM

and Quad CrossFireX

TM

Graphics * * Requires a Processor with Intel

®

Graphics Technology

- Intel

®

Graphics Media Accelerator HD

- Pixel Shader 4.0, DirectX 10

- Max. shared memory 1759MB (see CAUTION 7)

- Three VGA Output options: D-Sub, DVI-D and HDMI

(see CAUTION 8)

- Supports HDMI 1.3a Technology with max. resolution up to

1920x1200

- Supports DVI with max. resolution up to 1920x1200 @ 60Hz

- Supports D-Sub with max. resolution up to 2048x1536 @

75Hz

- Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI 1.3a

(Compliant HDMI monitor is required) (see CAUTION 9)

- Supports HDCP function with DVI and HDMI ports

- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

77

7

ASRock H55DE3 Motherboard

EnglishEnglish

English

Audio - 7.1 CH HD Audio (VIA

®

VT1718S Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111DL

- Supports Wake-On-LAN

Rear Panel I/O I/O Panel

- 1 x PS/2 Keyboard Port

- 1 x VGA/D-Sub Port

- 1 x VGA/DVI-D Port

- 1 x HDMI Port

- 1 x Optical SPDIF Out Port

- 4 x Ready-to-Use USB 2.0 Ports

- 2 x Powered eSATAII/USB Connectors

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

- HD Audio Jack: Rear Speaker/Central/Bass/Line in/Front

Speaker/Microphone (see CAUTION 10)

Connector - 4 x SATAII 3.0Gb/s connectors, support NCQ, AHCI and “Hot

Plug” functions (see CAUTION 11)

- 1 x IR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x TPM header

- 1 x Chassis Intrusion header

- CPU/Chassis/Power FAN connector

- 24 pin ATX power connector

- 8 pin 12V power connector

- Front panel audio connector

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

(see CAUTION 12)

BIOS Feature - 16Mb AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- CPU, VCCM, SB, VTT, PCH PLL Voltage Multi-adjustment

- Supports I. O. T. (Intelligent Overclocking Technology)

- Supports Smart BIOS

88

8

ASRock H55DE3 Motherboard

EnglishEnglish

English

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version),

ASRock Software Suite (CyberLink DVD Suite and Creative

Sound Blaster X-Fi MB) (OEM and Trial Version)

Unique Feature - ASRock OC Tuner (see CAUTION 13)

- Intelligent Energy Saver (see CAUTION 14)

- Instant Boot

- ASRock Instant Flash (see CAUTION 15)

- ASRock OC DNA (see CAUTION 16)

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 17)

- ASRock U-COP (see CAUTION 18)

- Boot Failure Guard (B.F.G.)

- Good Night LED

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU/Chassis/Power Fan Tachometer

- CPU Quiet Fan

- CPU Fan Multi-Speed Control

- CASE OPEN detection

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

®

Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit

/ XP / XP 64-bit compliant

Certifications - FCC, CE, WHQL

- EuP Ready (EuP ready power supply is required)

(see CAUTION 19)

* For detailed product information, please visit our website: http://www.asrock.com

99

9

ASRock H55DE3 Motherboard

EnglishEnglish

English

CAUTION!

1. Intel

®

Core

TM

i3 and Pentium

®

G6950 processors do not support Intel

®

Turbo Boost Technology.

2. About the setting of “Hyper Threading Technology”, please check page 45

of “User Manual” in the support CD.

3. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 28 for details.

4. This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 15 for proper installation.

5. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

®

7 /

Vista

TM

/ XP. For Windows

®

OS with 64-bit CPU, there is no such limitation.

6. For those CPU that only support up to DDR3 1333, the XMP DDR3 1600

is supported through overclocking.

7. The maximum shared memory size is defined by the chipset vendor and

is subject to change. Please check Intel

®

website for the latest information.

8. You can choose to use two of the three monitors only. D-Sub, DVI-D and

HDMI monitors cannot be enabled at the same time. Besides, with the DVI-

to-HDMI adapter, the DVI-D port can support the same features as HDMI

port.

9. xvYCC and Deep Color are only supported under Windows

®

7 64-bit / 7.

Deep Color mode will be enabled only if the display supports 12bpc in

EDID. HBR is supported under Windows

®

7 64-bit / 7 / Vista

TM

64-bit /

Vista

TM

.

10. For microphone input, this motherboard supports both stereo and mono

modes. For audio output, this motherboard supports 2-channel, 4-channel,

6-channel, and 8-channel modes. Please check the table on page 3 for

proper connection.

11. Before installing SATAII hard disk to SATAII connector, please read the

“SATAII Hard Disk Setup Guide” on page 32 of “User Manual” in the support

CD to adjust your SATAII hard disk drive to SATAII mode. You can also

connect SATA hard disk to SATAII connector directly.

12. Power Management for USB 2.0 works fine under Microsoft

®

Windows

®

7

64-bit / 7 / Vista

TM

64-bit / Vista

TM

/ XP 64-bit / XP SP1 or SP2.

13. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

®

environment.

Please visit our website for the operation procedures of ASRock OC

Tuner.

ASRock website: http://www.asrock.com/feature/OCTuner/index.htm

1010

10

ASRock H55DE3 Motherboard

EnglishEnglish

English

14. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. In other words, it is able to provide exceptional

power saving and improve power efficiency without sacrificing computing

performance. Please visit our website for the operation procedures of

Intelligent Energy Saver.

ASRock website: http://www.asrock.com/feature/IES/index.html

15. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.

This convenient BIOS update tool allows you to update system BIOS

without entering operating systems first like MS-DOS or Windows

®

. With

this utility, you can press <F6> key during the POST or press <F2> key to

BIOS setup menu to access ASRock Instant Flash. Just launch this tool

and save the new BIOS file to your USB flash drive, floppy disk or hard

drive, then you can update your BIOS only in a few clicks without prepar-

ing an additional floppy diskette or other complicated flash utility. Please

be noted that the USB flash drive or hard drive must use FAT32/16/12 file

system.

16. The software name itself – OC DNA literally tells you what it is capable of.

OC DNA, an exclusive utility developed by ASRock, provides a conve-

nient way for the user to record the OC settings and share with others. It

helps you to save your overclocking record under the operating system

and simplifies the complicated recording process of overclocking settings.

With OC DNA, you can save your OC settings as a profile and share with

your friends! Your friends then can load the OC profile to their own system

to get the same OC settings as yours! Please be noticed that the OC

profile can only be shared and worked on the same motherboard.

17. Although this motherboard offers stepless control, it is not recommended

to perform over-clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU.

18. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

19. EuP, stands for Energy Using Product, was a provision regulated by

European Union to define the power consumption for the completed system.

According to EuP, the total AC power of the completed system shall be

under 1.00W in off mode condition. To meet EuP standard, an EuP ready

motherboard and an EuP ready power supply are required. According to

Intel’s suggestion, the EuP ready power supply must meet the standard of

5v standby power efficiency is higher than 50% under 100 mA current

consumption. For EuP ready power supply selection, we recommend you

checking with the power supply manufacturer for more details.

1111

11

ASRock H55DE3 Motherboard

EnglishEnglish

English

1.31.3

1.3

TT

T

wo CrossFwo CrossF

wo CrossF

ireXireX

ireX

TMTM

TM

Graphics Card Suppor Graphics Card Suppor

Graphics Card Suppor

t Listt List

t List

(for Windows

®

XP / XP 64-bit / Vista

TM

/ Vista

TM

64-bit)

Chipset Model Name Chipset Name Driver

Vendor

ATI

ASUS-EAH4350-SILENT-DI/512M-DDR2 Radeon HD4350 Catalyst 9.7

GECUBE HD4850/512M/GDDR3 Radeon HD4850 Catalyst 9.7

Gigabyte GV-RX26T256HP-B Radeon HD 2600XT Catalyst 9.7

GIGABYTE GV-RX385256H-B Radeon HD 3850 Catalyst 9.7

MSI RX2600PRO-T2D256EZ Radeon HD 2600PRO Catalyst 9.7

Powercolor HD3650/512M Radeon HD 3650 Catalyst 9.7

Powercolor HD3870/512MB Radeon HD 3870 Catalyst 9.7

Powercolor HD4670/512MB-GDDR3 Radeon HD4670 Catalyst 9.7

* For the latest updates of the supported PCI Express VGA card list for

CrossFireX

TM

Mode, please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

1212

12

ASRock H55DE3 Motherboard

EnglishEnglish

English

2.2.

2.

InstallationInstallation

Installation

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install mother-

board components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet

or the like. Also remember to use a grounded wrist strap or touch

a safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded

antstatic pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the

motherboard to the chassis, please do not over-tighten the

screws! Doing so may damage the motherboard.

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

For the installation of Intel 1156-Pin CPU,

please follow the steps below.

Before you insert the 1156-Pin CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

1156-Pin Socket Overview

1313

13

ASRock H55DE3 Motherboard

EnglishEnglish

English

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear re-

tention tab.

Step 1-2. Rotate the load lever to fully open posi-

tion at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open posi-

tion at approximately 100 degrees.

Step 2. Remove PnP Cap (Pick and Place Cap).

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

Step 3. Insert the 1156-Pin CPU:

Step 3-1. Hold the CPU by the edges where are

marked with black lines.

Step 3-2. Orient the CPU with IHS (Integrated Heat

Sink) up. Locate Pin1 and the two ori-

entation key notches.

For proper inserting, please ensure to match the two orientation key

notches of the CPU with the two alignment keys of the socket.

black line

Pin1

alignment key

Pin1

1156-Pin CPU

1156-Pin Socket

orientation key notch

1414

14

ASRock H55DE3 Motherboard

EnglishEnglish

English

Step 3-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 3-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

For proper installation, please kindly refer to the instruction manuals of your CPU fan and

heatsink.

Below is an example to illustrate the installation of the heatsink for 1156-Pin CPU.

Step 1. Apply thermal interface material onto center of

IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure

fan cables are oriented on side closest to the

CPU fan connector on the motherboard

(CPU_FAN1, see page 2, No. 3).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press down

on fastener caps with thumb to install and lock.

Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with

fan operation or contact other components.

1515

15

ASRock H55DE3 Motherboard

EnglishEnglish

English

2.3 Installation of Memory Modules (DIMM)2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,

and supports Dual Channel Memory Technology. For dual channel configuration,

you always need to install identical (the same brand, speed, size and chip-

type) DDR3 DIMM pair in the slots of the same color. In other words, you have to

install identical DDR3 DIMM pair in Dual Channel (DDR3_A1 and DDR3_B1;

white slots; see p.2 No.6), so that Dual Channel Memory Technology can be

activated. This motherboard also allows you to install four DDR3 DIMMs for dual

channel configuration, and please install identical DDR3 DIMMs in all four slots.

You may refer to the Dual Channel Memory Configuration Table below.

Dual Channel Memory Configurations

DDR3_A2 DDR3_A1 DDR3_B2 DDR3_B1

(Blue Slot) (White Slot) (Blue Slot) (White Slot)

(1) - Populated - Populated

(2)* Populated Populated Populated Populated

* For the configuration (2), please install identical DDR3 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of white slots

(DDR3_A1 and DDR3_B1).

2. If only one memory module or three memory modules are installed

in the DDR3 DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot;otherwise, this motherboard and DIMM may be damaged.

4. Please install the memory module into the white slot (DDR3_B1) for

the first priority.

1616

16

ASRock H55DE3 Motherboard

EnglishEnglish

English

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the slot

at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1717

17

ASRock H55DE3 Motherboard

EnglishEnglish

English

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 4 PCI Express slots on this motherboard.

PCI slot: PCI slot is used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots:

PCIE1 / PCIE3 (PCIE x1 slot; White) is used for PCI Express cards with

x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width

graphics cards, or used to install PCI Express graphics cards to

support CrossFireX

TM

function.

PCIE4 (PCIE x16 slot; White) is used for PCI Express x4 lane width

cards, or used to install PCI Express graphics cards to support

CrossFireX

TM

function.

1. In single VGA card mode, it is recommended to install a PCI Express

x16 graphics card on PCIE2 slot.

2. In CrossFireX

TM

mode, please install PCI Express x16 graphics cards

on PCIE2 and PCIE4 slots. Therefore, PCIE2 slot will work at x16

bandwidth while PCIE4 slot will work at x4 bandwidth.

3. If you install a PCI Express x1 graphics card on PCIE3 slot, PCIE4 slot

will work at x1 bandwidth.

4. If you want PCIE4 slot to work at x4 bandwidth, please do not install

PCI Express device on PCIE3 slot.

1818

18

ASRock H55DE3 Motherboard

EnglishEnglish

English

1. If a customer incorrectly configures their system they will not see the

performance benefits of CrossFireX

TM

. All three CrossFireX

TM

components, a

CrossFireX

TM

Ready graphics card, a CrossFireX

TM

Ready motherboard and a

CrossFireX

TM

Edition co-processor graphics card, must be installed correctly to

benefit from the CrossFireX

TM

multi-GPU platform.

2. If you pair a 12-pipe CrossFireX

TM

Edition card with a 16-pipe card, both cards

will operate as 12-pipe cards while in CrossFireX

TM

mode.

2.52.5

2.5

CrossFireXCrossFireX

CrossFireX

TMTM

TM

and Quad CrossFireX and Quad CrossFireX

and Quad CrossFireX

TMTM

TM

Operation Operation

Operation

GuideGuide

Guide

This motherboard supports CrossFireX

TM

and Quad CrossFireX

TM

feature.

CrossFireX

TM

technology offers the most advantageous means available of combining

multiple high performance Graphics Processing Units (GPU) in a single PC. Combining

a range of different operating modes with intelligent software design and an innovative

interconnect mechanism, CrossFireX

TM

enables the highest possible level of

performance and image quality in any 3D application. Currently CrossFireX

TM

feature

is supported with Windows

®

XP with Service Pack 2 / Vista

TM

/ 7 OS. Quad

CrossFireX

TM

feature are supported with Windows

®

Vista

TM

/ 7 OS only. Please

check AMD website for ATI

TM

CrossFireX

TM

driver updates.

2.5.1 Graphics Cards Setup2.5.1 Graphics Cards Setup

2.5.1 Graphics Cards Setup

Different CrossFireX

TM

cards may require different methods to enable CrossFireX

TM

feature. In below procedures, we use Radeon HD 3870 as the example graphics card.

For other CrossFireX

TM

cards that ATI

TM

has released or will release in the future, please

refer to ATI

TM

graphics card manuals for detailed installation guide.

Step 1. Insert one Radeon graphics card into PCIE2 slot and the other Radeon

graphics card to PCIE4 slot. Make sure that the cards are properly seated

on the slots.

1919

19

ASRock H55DE3 Motherboard

CrossFire Bridge

Step 2. Connect the DVI monitor cable to the DVI connector on the Radeon graphics

card on PCIE2 slot. (You may use the DVI to D-Sub adapter to convert the

DVI connector to D-Sub interface, and then connect the D-Sub monitor

cable to the DVI to D-Sub adapter.)

Step 2. Connect two Radeon graphics cards by installing CrossFire Bridge on

CrossFire Bridge Interconnects on the top of Radeon graphics cards.

(CrossFire Bridge is provided with the graphics card you purchase, not

bundled with this motherboard. Please refer to your graphics card vendor

for details.)

or

EnglishEnglish

English

2020

20

ASRock H55DE3 Motherboard

EnglishEnglish

English

Step 6. Double-click “ATI Catalyst Control Center”. Click “View”, select

“CrossFireX

TM

”, and then check the item “Enable CrossFireX

TM

”. Select the

option according to the total GPU number on the Radeon graphics cards.

Click “Apply”.

The Catalyst Uninstaller is an optional download. We recommend using this

utility to uninstall any previously installed Catalyst drivers prior to installation.

Please check AMD website for ATI

TM

driver updates.

Step 3. Install the required drivers to your system.

For Windows

®

XP OS:

A. ATI

TM

recommends Windows

®

XP Service Pack 2 or higher to be

installed (If you have Windows

®

XP Service Pack 2 or higher installed

in your system, there is no need to download it again):

http://www.microsoft.com/windowsxp/sp2/default.mspx

B. You must have Microsoft .NET Framework installed prior to

downloading and installing the CATALYST Control Center. Please

check Microsoft website for details.

For Windows

®

Vista

TM

OS:

Install the CATALYST Control Center. Please check AMD website for details.

Step 4. Restart your computer.

Step 5. Install the VGA card drivers to your system, and restart your computer.

Then you will find “ATI Catalyst Control Center” on your Windows

®

taskbar.

ATI Catalyst Control Center

2.5.2 Driver Installation and Setup2.5.2 Driver Installation and Setup

2.5.2 Driver Installation and Setup

Step 1. Power on your computer and boot into OS.

Step 2. Remove the ATI

TM

driver if you have any VGA driver installed in your system.

La pagina sta caricando ...

ASROCK H55DE3 Manuale utente

Questo manuale è adatto anche per

ASROCK H55DE3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti