USER MANUAL

MANUALE UTENTE

SOLAR48Q

OUTDOOR COMPACT WASHLIGHT

EN - IT

All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteris-

tics stated in this instruction manual at any time and without prior notice.

General instructions

Warnings and installation precautions

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

3. 4 DMX addressing

3. 5 DMX conguration

3. 6 Wireless settings

3. 7 Screen

3. 8 Fixture settings

3. 9 Information

3. 10 Master/Slave

3. 11 Eects mode

3. 12 Static mode

3. 13 Manual mode

2

2

3

3

5

9

10

10

10

11

11

12

12

12

12

13

17

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

plant for a disposal which is not harmful to the environment.

• If this device will be operated in any way dierent to the one described in this manual, it may suer

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• When carrying out any work, always comply scrupulously with all the regulations (particularly regard-

ing safety) currently in force in the country in which the xture’s being used.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

SOLAR48Q is a compact fan-free outdoor wash light featuring an outstanding brightness of 22'760

lumens. Equipped with 48x10 W RGBW full-colour LEDs all delivering superior colour mixing. Featuring a

slimline styling, multiple interchangeable optics through magnets, asymmetrical lters which combined,

• Lux: (25°) 14'900lx @3 m full

• Lux: (25°) 5'364lx @5 m full

• Source life expectancy: > 50.000 h

• Beam angle: 25° - With included lter 45°

• Additional optics: 10° / 15° / 45° / 40° lter / 10x60° lter / 30x60° lter

• Other: magnetic lter included to achieve 45° (60° lter), barn door not included

• Colour mixing: RGBW / FC

• CTC: CTC control through independent DMX channel

• Auto mode: built-in programs with execution speed adjustment

• Hardware on-board: magnetic lter frame with 45° lter

• Tilt angle: 0 - 150° manual

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: black

• Protocols: DMX512, RDM, W-DMX

• DMX channels: 5 / 7 / 10 / 17 / 22channel

• W-DMX: included, wireless solution receiver

• Dimmer: linear 0 ~ 100% electronic dimmer

• Strobe / shutter: 1 - 30 Hz, electronic

• Operating temperature: -20° ~ +45°

• Flicker: icker free frequency with adjustable PWM

• Selectable PWM: 600 ~ 25.000 Hz

• Power consumption: 700

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230 V): 513W

• Power consumption (at 120 V): 541W

• Output (at 230 V): 4 units on a single power line

• Output (at 120 V): 2 units on a single power line

• Power factor: 0,95

• Sospension and xing: hanging bracket for oor positioning with "Quick-Lock" system

Connect the supplied main cable to a socket (100-240V~/50-60Hz). To switch o, disconnect the mains

plug from the socket. For a more convenient operation it is recommended to connect the unit to a socket

which can be switched on and o via light switch.

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch o the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

subject to dust and grease deposits. The frequency with which the following operations are to be carried

out depends on various factors, such as the amount of the eects and the quality of the working environ-

for cleaning glass to remove the dirt from the reectors, from the lenses and lters.

It is recommended that the projector undergoes an annual service by a qualied technician for special

maintenance involving at least the following operations:

- General cleaning of internal parts..

- General visual check of the internal components, cabling, mechanical parts, etc.

- Electrical, photometric and functional checks; eventual repairs.

Warning: we strongly recommend internal cleaning to be carried out by qualied personnel!

REV. 02-11/19

Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso.