Ohlins AP832 Mounting Instruction

Tipo
Mounting Instruction
Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
www.ohlins.com
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document.
Shock Absorber for Aprilia RSV4
AP 832
Mounting Instructions
Part No. Pcs.
Shock absorber AP832 1
C-spanner TTX36 00710-05 1
Öhlins Sticker 00192-01 2
Memo Notes Sticker 01180-01 1
Owner’s Manual 07242-01 1
Before installing this product, check the
contents of the kit. If anything is missing, please
contact your nearest Öhlins dealer.
Kit Contents
Recommended set-up
Spring Preload 11 mm
Rebound 12 clicks
Compression 12 clicks
Set-up Data
Adjustments
Please note that during storage and
transportation, especially at high ambient
temperature, some of the oil and grease used for
assembling may leak and stain the packaging.
This is in no way detrimental to the product,
wipe off the excessive oil/grease with a cloth.
Part no. AP832_0
Issued 2009-05-28
Spring Preload
Adjuster
Warning!
Before installing this product, read the Öhlins
Owner’s Manual. The shock absorber is an
important part of your vehicle and will affect the
stability.
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins
Owner’s Manual before you make any
adjustments. Contact an Öhlins dealer if you
have any questions about setting up the shock
absorber.
Rebound
Adjuster
Length Adjuster
Compression
Adjuster
!
Total length 310
+6
/
0
mm
Stroke 67 mm
Spring; Free length 160 mm
Spring rate 95 N/mm
1 2
How to Install
Warning!
It is advisable to have an Öhlins dealer install the
shock absorber.
When installing, consult your Vehicle Service
Manual.
1
Put the motorcycle on a workstand so that
the rear wheel barely touches the ground.
Warning!
Make sure the vehicle is securely supported so
that it will not tip.
2
Remove the original shock absorber.
Note!
Before installing the Öhlins shock absorber clean
the vehicle thoroughly.
3
Install the Öhlins shock absorber in the same
way as the original shock absorber.
Note!
Lower the motorcycle so that the shock
absorber is sligthly compressed, before
tightening the screws.
Caution!
Make sure that all screws are tightened to the
correct torque and that nothing fouls or restricts
movement of the shock absorber when the
suspension is fully compressed or extended.
1
MANUALE AMMORTIZZATORE TTX36 FORMATO A5 STAMPATO A COLORI FRONTE/RETRO
OWNER'S MANUAL TTX36 A5 FORMAT PRINTED COLOR FRONT/REAR
5
CODICE Ohlins
07242-01
/1
ADESIVO OHLINS DIMENSIONI: 47x125 GIALLO/BLU
STICKER OHLINS DIMENSIONS: 47x125 YELLOW/BLU
3
CODICE
Ohlins
00192-01
/2
/ RIF. DIS. OHLINS ????
C-SPANNER TTX36 / OHLINS DRAWING REF. ????
2
CODICE
Ohlins
00710-05
/1
Il presente documento è proprietà della Piaggio & C. S.p.A. e senza permesso scritto della stessa non potrà essere comunque utilizzato per la costruzione dell'oggetto rappresentato né
venire comunicato a terzi o riprodotto. La società proprietaria tutela i propri diritti a termine di legge.
All proprietary rights reserved by Piaggio & C. S.p.A. This drawing shall not be reproduced or in any way utilized to make components and it must not be released to other parties without
written consent. The Company asserts one's rights according to the law
CF.
2
Mod. 0166 UNI A 4
Codice lessico
Denom. Code
Per errori ammissibili per quote ed altre prescrizioni generali,
vedere Tabella 1500/T.S.
General tollerances and prescription according to 1500/T.S.
standard.
N° DISEGNO - PART NUMBER
894912
64 05 08
……. ……….
Rasterizzato
Rastered
Descrizione della modifica
Modification description
KIT AMMORTIZZATORE OHLINS TTX36 PER APRILIA RSV4
COD. KIT 894912
SHOCK ABSORBER TTX36 KIT FOR APRILIA RSV4 COD. 894912
Cod. Colore
Color code
Normalizzato
Standard
Esp. Rev.
Data
Date
Data Date
Cod.
2009-06-08
M
.
P
arent
i
Materiale
Matirial
Codice
Code
N
……………………
…………………………………………………………….
……………………………………………………….
M
.
Fi
oravanz
o
Controllato
Checked
Peso Kg.
Weight
…….
Inviato per - Delivered For
Di
segna
t
o
Drawn
G
.
C
uog
o
Denominazione
Part Name
Piaggio & C. S.p.A.
Visto
Approved
Microfilmato microfilm
Firma
Sign.
Mod. UT:
606AI
/
Pos.
Item
DIS./S.TECNICA
DRAW./T SHEET
4
/
7 853418
9
/
Quantità
Quantity
Descrizione
Description
CODICE
CODE
Specifiche Tecniche
Technical Specifications
Note
Note
1 895705
1
AMMORTIZZATORE TTX36 VEDI DISEGNO RIF. OHLINS AP_832
SHOCK ABSORBER TTX36 SEE DRAWING OHLINS REF. AP_832
1
ADESIVO OHLINS MEMO NOTES / GIALLO
STICKER MEMO NOTES / YELLOW
1
MANUALE APRILIA ISTRUZIONI GENERICHE FORMATO A 4 STAMPATO FRONTE/RETRO BIANCO/NERO
APRILIA MANUAL, GENERIC INSTRUCTIONS A4 FORMAT PRINTED FRONT/REAR WHITE/BLACK
1
POLIURETANO ESPANSO PREFORMATO
DIMENSIONS: 493x223x174
NERA PERSONALIZZATA OHLINS
BLACK PERSONALIZED OHLINS
//
EXPANDED POLYURETHANE FOAM PREFORMS / /
8
/1
SCATOLA DI CONFEZIONAMENTO
PARTI CHE COMPONGONO IL KIT COMPLETO, COD. OHLINS :
AP 8320
PARTS FOR THE COMPLETE KIT, OHLINS CODE :
Pos.
Item
DIS./S.TECNICA
DRAW./T SHEET
IMBALLO / PACKAGE
/
10
/1
ETICHETTA CON CODICE E DESCRIZIONE PIAGGIO
/
DIMENSIONI: 493x223x174
895705
CODICE
Ohlins
01180-01
853418
MANUALE ISTRUZIONI DI MONTAGGIO SU RSV4
CODICE
CODE
PACKAGE BOX
CODICE Ohlins
00592-30
CHIAVE REGOLAZIONE GHIERE TTX36
//
LABEL WITH PIAGGIO CODE AND DESCRIPTION /
Specifiche Tecniche
Technical Specifications
Note
Note
Quantità
Quantity
Descrizione
Description
6
CODICE Ohlins
01201-01
/1
FORMATO A5 STAMPATO A COLORI FRONTE/RETRO
MOUNTING INSTRUCTIONS MANUAL ON RSV4 A5 FORMAT PRINTED COLOR FRONT/REAR
894912_kit_ammortizzatore_Ohlins_TTX36_RSV4 pag 1 di 1 2009-06-10 @ 10:28
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ohlins AP832 Mounting Instruction

Tipo
Mounting Instruction

in altre lingue