Moneual ME685 Series Manuale utente

Categoria
Aspirapolvere robotici
Tipo
Manuale utente

Questo manuale è adatto anche per

User Manual
Robot Cleaner
Ver 1.2
ME685 Series
Thank you for purchasing the ME685 series robot cleaner.
Before using the product, please read this User Manual carefully, and keep it for future reference.
Depending on your model, some contents of this User Manual may dier from the actual product.
The contents of this User Manual are subject to change without notice.
ME685 Series
Robot Cleaner
User Manual
Features
Mop Cleaning
Utilizing the attachable full sized mop, the mop cleaning mode is optimized for cleaning even
the nest dusts that are harmful to health.
Big Mop with Water Supply System
By Water Supply System, the Big Mop is continuously moistened to clean your hard oors
during the cleaning cycle.
Shadow Cleaning
This is a function that enables you to clean area where the light does not reach. In Shadow
Cleaning mode, you can intensively clean areas under the bed, sofa, etc. that are dicult
to clean with a conventional vacuum cleaner.
High Performance BLDC Motor
The cleaning performance is excellent due to the powerful BLDC (suction) motor. The BLDC
motor is 30% more powerful than a DC motor, and the lifetime is approximately 10 times as
long (estimated: 5,000 hours).
Various Cleaning Modes
The various cleaning modes provide dierent cleaning functions and levels of performance,
which are optimized for the user environment.
Hybrid Cleaning Intensive Cleaning
Mop Cleaning
Manual Cleaning Scheduled CleaningCorner Cleaning
8.6cm
8.6 cm Slim Design
With a slim design, the MONEUAL ME685 is just 8.6 cm high, enabling it to clean under the bed
and the sofa, where it is dicult to clean with a vacuum cleaner or by hand.
Eco-friendly Lithium Iron Phospate Battery
The MONEUAL ME685 uses an eco-friendly battery that does not contain any heavy metals or
acids that are harmful to the human body. The Lithium Iron Phospate Battery has a lifetime that
is approximately three times longer (1,000 cycles) than standard lithium-based or nickel-based
batteries. It provides higher levels of operational safety due to high resistance to heat and
explosion.
Auto Charging
After it is nished cleaning or when it detects that the battery is low, the robot cleaner auto-
matically returns to the charger and starts charging.
Obstacle Avoidance and Fall Protection
The obstacle detection sensors in the bumper help the MONEUAL ME685 avoid obstacles and
walls, and the cli detection sensors in the bottom detect height dierences and prevent it
from falling down stairs.
Contents
Before Use
Features
02
Safety Information
05
What’s in the Box
10
Overview
11
Installing
Installing the Charger
14
Installing the Side Brushes
15
Remote Control
16
Charging
17
Installing the Water Supply Big Mop Kit
18
Product
Operation
Before You Start
20
Starting & Stopping Cleaning
21
How to Recharge the Battery
23
Hybrid Cleaning
24
Vacuum Cleaning
25
Mop Cleaning
26
Other Cleaning Modes and Options
28
Maintenance
Language Setting
36
Cleaning the Dust Bin
37
Cleaning the Dust Filter
38
Cleaning Sensors and Wheels
39
Cleaning the Dust Inlet
40
Using and Managing the Battery
41
Voice Guidance
44
Error Message Description
45
Customer
Support
Troubleshooting
47
Specications
48
Product Warranty
51
5
Before Use
Safety Information
Please read and follow the instructions in this manual to ensure your safety and the safe use of your robot cleaner.
Safety symbols
In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt
you and/or damage your robot vacuum cleaner.
You may be killed or seriously injured
if you do not follow this instruction.
You may be injured or your appliance
may be damaged if you do not follow
this instruction.
You should refer to this
note when using your
robot cleaner.
Warning Caution Note
Before you use

Do not install or use the robot cleaner in a place where it will be exposed to direct sunlight.
Þ
If the power adapter becomes overheated during charging it may cause a re, short circuit, or electrical shock.
Þ
The robot cleaner may become discolored and deformed.

Do not install the charger on an inclined oor, and do not apply impact to the charger.
Þ
The charger may become damaged or broken.

Do not use the product in a room with an unattended child or an elderly person.
Þ
There is a risk that the child or elderly person may become frightened or injured.

This robot cleaner is not intended for use by children, or by persons with reduced physical, sensory or mental capabilities, unless
they have given supervision or instruction concerning the use of the robot cleaner by a person responsible for their safety.
Þ
This may cause injury or damage the robot cleaner.

Before you use the robot cleaner, remove any small objects, clothes, and fragile objects from the oor to be cleaned.
Þ
This may cause damage to the robot cleaner and obstruct the movement of the robot cleaner.
Þ
Make sure to remove fragile objects (glass, china, owerpot, etc.).
Þ
Small cloths, power cords, belts, towels, pads, and telephone cords can become entangled in the wheels or brushes.

Remove obstacles on the oor before cleaning.
Þ
The robot cleaner will not be able to move beyond obstacles of a certain height.
6
Robot Cleaner

Install the charger in a location that can be easily accessed by the robot cleaner.
Þ
If you install the charger in a corner or if there are many obstacles around the charger, it may prevent the robot cleaner
from automatically charging.

Make sure that the charger is always plugged into a power source.
Þ
If no power is supplied to the charger, you will not be able to use the automatic charge function.
When you use

Do not use the power adaptor with another appliance.
Þ
This may cause damage to the appliance and re by overheating.

Ensure that clothes or any part of the body (hair, nger, foot, etc.) do not get entangled in the brushes or wheels.
Þ
This may cause injury.

Do not use or store the robot cleaner near ammable materials (alcohol, gasoline, kerosene, thinner, etc.) or heating
sources (cigarettes, candles, stove, etc.).
Þ
This may cause re and damage to the robot cleaner.

If you notice smoke or a burning smell coming from the robot cleaner, immediately turn the power switch o and
contact your service center.

Do not stand or sit on the robot cleaner.
Þ
Movement of the robot cleaner may cause injury or the robot cleaner may be damaged.

Do not use the robot cleaner on a narrow high place such as a desk, table, etc.
Þ
The robot cleaner may fall o which could cause injury or damage to the product.

Do not let the robot cleaner pass over or sweep up liquids, oil, pet droppings, etc.
Þ
This may cause malfunction of the robot cleaner and damage.
Þ
Liquid on the wheels may cause stains in other places.
If the robot cleaner sucks a plastic bag in while operating, immediately remove it.
Þ
If you run the robot cleaner for a long time with the dust inlet covered with a plastic bag, the motor will be overheated
and the robot cleaner will be damaged.

Do not press strongly or impact the bumper.
Þ
This may cause damage to bumper sensors and malfunction.
7
Before Use

Do not use the robot cleaner in a place where the temperature is too low or too high (lower than -5°C and higher than 35°C).
Þ
This may cause damage to the product.

Do not use the robot cleaner when the dust bin is completely lled up.
Þ
This may reduce the suction power.

Never use the robot cleaner without the lters.
Þ
Doing so may cause a malfunction of the robot cleaner.

Remove objects (such as loose clothing, towels, cloths, belts, or hairs) scattered on the oor before cleaning.
Keep objects away from brushes and wheels to prevent entanglement.
Þ
This may cause noise, reduce the suction power, and damage the robot cleaner.

Do not use the robot cleaner in a place where the oor or wall is made of glass or mirrors.
Þ
The robot cleaner detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.

Do not use the robot cleaner in a utility room, on a wet oor, on stairs, on a table or shelf, in an underground room, in
a warehouse, in a commercial building, or outdoors.

If you have dropped or given an impact to the robot cleaner, contact your service center.
Electrical instructions

Please use the power source and socket with the correct voltage and current.
Þ
If you use a power source or socket that does not t the power specications, there is the risk of re, electrical shock,
and damage to the robot cleaner.

Make sure the power cord is not bent or crushed by heavy objects.
Þ
A damaged power cord may cause re or electrical shock.
Þ
To repair or replace a damaged power cord, contact a qualied service agent to ensure your safety.

When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
Þ
Stress on the cable will damage the power cord, which may cause re or electrical shock.

Do not use a damaged power cord! To repair or replace a damaged power cord, contact a qualied service agent to
ensure safety.
Þ
If a non-qualied person repairs the power cord, there is a risk of re or electrical shock.
8
Robot Cleaner

Do not touch the plug or wall socket with wet hands.
Þ
Doing so may cause electric shock.

If you spill water into the robot cleaner, unplug the power cord and allow the unit to dry completely before use.
Þ
Water can bring the risk of re and electrical shock.
Þ
Immediately remove the power cord from the outlet and contact your service center.

Do not use chargers other than the charger that came with your robot cleaner.
Þ
Overvoltage brings the risk of re and electrical shock.

Do not install the charger in a location that is damp or wet, dusty, or near water.
Þ
This may cause a re or an electrical shock and damage to the unit.

Do not touch the terminal of the charger with any metallic object (such as a clip, pin, etc.).
Þ
This creates the risk of re and electrical shock.

If you do not plan to use the robot cleaner for an extended period of time, turn o the power switch at the bottom of
the back.
Þ
The battery may be discharged if you leave it switched on.
Management

To ensure safety, only a qualied service agent should repair or disassemble the product.
Þ
Repair by unqualied personnel may damage the robot cleaner, and brings the risk of re and electrical shock.

Dispose of the battery properly.
Þ
If you throw the battery into re or expose it to direct sunlight, there is the risk of re and explosion.
Þ
Dispose of your old batteries according to the local laws and regulations of your region.

Clean the obstacle and bottom sensors periodically.
Þ
If the sensor becomes covered by lint and dust, the robot cleaner may malfunction.

Please use the specied lter.
Þ
Use of a dierent lter will void your warranty.
9
Before Use

Please clean the robot cleaner after turning it o.
Þ
If you clean it when the power is on or it is operating, it may cause injury.

Clean the main brush, dust bin, dust lter, and dust inlet periodically.
Þ
If you use the robot cleaner for a long time without cleaning it, there is the risk of malfunction and damage.
Copyright and instructions
Þ
Copyright © 2014 MONEUAL Inc. All rights reserved.
Þ
Published March 5, 2014.
Þ
MONEUAL, MONCASO, MiNEW, RYDIS, and SONAMU are the trademarks or registered trademarks of MONEUAL Inc.
in the Republic of Korea and/or other countries.
Þ
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by
any means or in any form, without the prior written consent of MONEUAL.
Þ
Depending on the model and type of your appliance, some of the contents in this manual may dier from your actual
product.
Þ
MONEUAL Inc. assumes no responsibility for technical or editorial errors or omissions contained herein, nor for any
incidental or consequential damages and failures of the appliance caused by not following the precautions and
instructions.
Þ
MONEUAL Inc. assumes no responsibility for damages resulting from the use of the product that is not approved by
the company.
10
Robot Cleaner
Whats in the Box
Robot cleaner
(1400mA built-in battery)
Charger Remote control
(included two AAA
batteries)
Power cordPower adaptor
Side brushes (1 set) User manual Quick start guideCleaning brush
Ver 1.0
Robot Cleaner
Quick Start Guide
ME685 Series
Ě
The appearance and specications may be changed without notice in order to improve functions or
performance.
Mop kits
Water Supply Big Mop Kit
1. Water Supply mop plate
for a big mop
2. Big mop
3. Mop cleaning brush
11
Before Use
Overview
Robot cleaner
ǘ
Top
ǘ
ǘ
Rear
ǘ
ǘ
Bottom
ǘ
2
3
4
8
7
6
5
10
11
9
11
15
9
12
13
11
14
9
12
1
Control buttons and indicators
2
Dust bin cover
3
Bumper
4

Obstacle and signal detection
sensors
5
Air outlet
6
Adaptor jack
7
Power switch
8
Signal receiving sensor
9
Cli detection sensors
10
Charging terminals
11
Wheels
12
Side brush installation pins
13
Dust inlet
14
Main brush
15
Mop plate installation holes
1
12
Robot Cleaner
Control buttons and indicators
1
Power/charging lamp
2

Guide signal transmission sensor
3
Charging terminals
4
Adaptor holder
5
Adaptor jack
6

Sensors signal distance
selection switch
Charger
ǘ
Front
ǘǘ
Back
ǘ
5
6
4
2
3
1
1
Start/stop button
2
Power button
3
Cleaning mode selection button
4
Vacuum Cleaning mode indicator
5
Charging mode indicator
6
Shadow cleaning mode indicator
7
Intensive Cleaning mode indicator
8
Hybrid Cleaning mode indicator
9
Mop cleaning mode indicator
10
Timer (every day) indicator
11
Timer (1 hour) indicator
12
Double Cleaning option indicator
13
Threshold option indicator
14
Battery level indicator
15
Turbo mode indicator
6
7
5
12
14
15
13
21 3
4
11
910 8
13
Before Use
1

Power button
Þ

Press to turn the power on/o.
Þ

Press to return the robot cleaner to operation mode when it has stopped due to
failure.
2
Mode button
Þ

Press to select the cleaning mode.
3
Start/Stop button
Þ

Press to start the selected operation.
Þ

Press to start/stop cleaning and driving.
4

Select/Manual button
Þ
Press to conrm your selection.
Þ

Press to start manual cleaning (see page 32).
5

Direction buttons
Þ
Press to drive the robot cleaner in manual mode
(forward, backward, left, and right).
6
Charge button
Þ

Press to move robot cleaner to charger.
7
Mop cleaning button
Þ

Press to start mop cleaning (see page 26).
8
Corner cleaning button
Þ
Press to start corner cleaning (see page 31).
9
Turbo button
Þ
Press to select Turbo option (see page 34).
10

Shadow cleaning button
Þ
Press to start under furniture cleaning (see page 30).
11
Double cleaning button
Þ
Press to select Double cleaning option (see page 35).
12
Reservation button
Þ

Press to set the timer (see page 33).
13
Mute button
Þ

Press to turn voice guidance on/o.
14
Threshold option button
Þ

Press to select Threshold option (see page 34).
Remote control
You can conveniently access the various functions of the robot cleaner with your remote control.
Þ

Functions that can be controlled through the control panel on the robot cleaner: Hybrid cleaning, Vacuum cleaning,
Mop cleaning, Intensive cleaning, Shadow cleaning, and Charging.
Þ

Functions that can be controlled through the remote control: Hybrid cleaning, Vacuum cleaning, Mop cleaning,
Intensive cleaning, Shadow cleaning, Corner cleaning, Manual cleaning, Charging, Reservation cleaning, Turbo option,
Threshold option, Double cleaning option, Mute, and Manual moving.
2
6
9
12
13
1
3
5
8
7
11
14
10
4
14
Robot Cleaner
Installing the Charger
2
1
Þ
Connect the power adaptor.
Þ

Set the robot cleaner detection distance (5 m or 8 m).
Þ

Place the power adaptor in the holder of the charger.
Þ
Check the power connection (blue lamp).
3
Þ

Check the location of the charger.

Clear all obstacles in the area within 1 m
in front, left, and right of the charger
Ě
If you install the robot cleaner in a place where it will be exposed to direct sunlight, the heat of the sun may
interfere with the auto charging, and the robot cleaner may become discolored over time.
Ě
If your robot cleaner can’t return to the charger, reset the detection distance.
In a narrow area, set it to 5 m, and in a wide area, set it to 8 m.
If you set the detection distance to 8 m in a narrow area, the auto charging may be interfered with.
15
Installing
Installing the Side Brushes
Þ

Check for the L mark
under the side brush.
Þ

Align with the L mark under the
robot cleaner and install the
L brush.
Þ

Check for the R mark
under the side brush.
Þ

Align with the R mark under the
robot cleaner and install the
R brush.
16
Robot Cleaner
Remote Control
Install the battery into the remote control.
Inserting batteries into the remote control
1
Þ
Remove the battery cover.
2
Þ
Insert the two AAA batteries that came with your robot cleaner.
Ě
Make sure to properly orient the + and – poles of the batteries when inserting the battery.
Ě
If you insert batteries incorrectly, there is a risk of re or damage to the remote control.
Be careful if you use non-standard 1.5V batteries, as this may cause damage to the product and its function.
If your battery has had a leakage, immediately replace it.
Dispose of batteries according to the local laws and regulations of your region.
3
Þ
Replace the battery cover.
17
Installing
Charging
If you have prepared the charger, main body, and remote control, you must then charge the battery of the robot
cleaner to use it. To charge the robot cleaner, follow these steps:
1
Þ
Turn the power switch on.
2
Þ
Hold the robot cleaner with both hands and put it on the charger.

Match the terminals of the robot cleaner with the terminals of the charger.

Put the robot cleaner in the front center of the charger and push the robot
cleaner toward the charger slowly until the status indicator turns red.
3
Þ
Use the robot cleaner after charging.

It takes about 1 hour to charge the battery fully.
(For 2800mAh battery models, it takes about 2 hours.)

After charging for 1 hour, you can use the robot cleaner in normal
suction mode for about 1 hour. (Depending on conditions,
the battery usage time may vary.)
Battery status indicator
Charging Blinking every second
Charging completed On
Low battery Blinking 4 times every second
Ě
You can charge the robot cleaner using connecting the power
adaptor directly to the power jack on the lower-rear side of
the robot cleaner.
18
Robot Cleaner
Installing the Water Supply Big Mop Kit
1
Þ
Supply water into the mop plate and attach
the mop to it.
2
Þ
Turn the power switch o
(on the lower rear side of the
robot cleaner).
3
Þ

Attach the mop plate.
Fit the joint parts well to the holes of
the robot cleaner.
Ě
If you apply excessive force to the
mop plate when you install it on the
robot cleaner, the joint parts of the
mop plate may be damaged.
4
Þ

Flip it over and turn the system power switch on.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Moneual ME685 Series Manuale utente

Categoria
Aspirapolvere robotici
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue