ADDER GEMAV2GEM Manuale utente

Marca: ADDER

Modello: GEMAV2GEM

Tipo: Manuale utente

ADDER

VViieeww

GEM

ADDER

VViieeww

GEM

www.addertec.com

4 Port ADDER View GEM

AV4GEM

AV2GEM

RC1

2 Port ADDER View GEM

Remote Control Pad/Display

AdderView GEM ENGLISH

Quick Installation and Operation Guide

QUICK INSTALLATION

Power off all your computers and connect them to the ORANGE ports on the rear

of the AdderView GEM. Adder 3-in-1 keyboard/video/mouse combination cables

are recommended for convenience. Suitable individual standard keyboard, video

and mouse cables are also widely available.

Connect your keyboard, monitor and mouse to the GREY port on the rear of the

AdderView.

OPERATION GUIDE SUMMARY

The AdderView's default configuration is suitable for most systems.

A computer may be selected using the front panel key, a three button mouse or a

keyboard hotkey combination. To select a computer using the mouse press and

release the left or right hand buttons whilst holding down the central button. To

select a computer using the keyboard hotkeys hold down the CTRL and ALT

keys, press and release the required port key (e.g. 1) and then release the CTRL

and ALT keys.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the AdderView GEM yourself.

Follow all warnings and instructions marked on the AdderView GEM, its optional

power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the AdderView GEM, make sure the total

ampere rating of the devices plugged into the extension cord does not exceed the

cord’s ampere rating. Also, make sure that the total ampere rating of all the

devices plugged into the wall outlet does not exceed the wall outlet’s ampere

rating.

Alternative language versions of this

manual may be downloaded from:

www.addertec.comwww.addertec.com

USA

AdderView GEM GERMAN

Quick-Guide für Installation & Betrieb

QUICK-INSTALLATION

Schalten Sie alle Ihre Computer aus, und schließen Sie sie an die ORANGEFARBENEN

Ports auf der Rückseite des AdderView GEM an. Wir empfehlen der Einfachheit halber

die Verwendung der Adder 3-in-1 Tastatur/Video/Mauskabel, es sind in der Regel jedoch

auch geeignete einzelne Standardmaus-, Video- und Tastaturkabel überall im Handel

erhältlich.

Schließen Sie Ihre Tastatur, Monitor und Maus an den GRAUEN Port auf der Rückseite

des AdderView an.

ZUSAMMENFASSUNG DES BETRIEBS-GUIDES

Die Vorgabekonfiguration des AdderView ist für die meisten Systeme geeignet.

Ein Computer kann für entweder die Verwendung der Taste auf der Frontanzeige, einer

Maus mit drei Tasten oder einer Kombination der Hot-Keys der Tastatur ausgewählt

werden. Zur Auswahl eines Computers, der eine Maus verwendet, die linke oder rechte

Taste kurz drücken, während die mittlere Taste gedrückt gehalten wird. Um einen

Computer auszuwählen, der die Hot-Keys der Tastatur verwendet, die Strg und ALT

Tasten zusammen gedrückt halten, und die erforderliche Port-Taste (z.B. 1) drücken und

loslassen, und dann die Strg und ALT Tasten loslassen.

Sicherheitstechnische Informationen

Nur für den Gebrauch innerhalb von trockenen, ölfreien Räumen vorgesehen.

Die Wartung des AdderView GEM darf nur ausschließlich von dazu qualifiziertem

Fachpersonal vorgenommen werden.

Sämtliche Warnhinweise und Anweisungen auf dem AdderView GEM, seinem optionalen

Stromadapter und Zubehörteilen beachten und befolgen.

Warnung – im Stormadapter sind unter Spannung stehende Teile enthalten.

Keine vom Benutzer zu wartenden Teile im optionalen Stromadapter enthalten – nicht

auseinandernehmen.

Den optionalen Stromadapter nur durch einen vom Hersteller zugelassenen Typ

ersetzen.

Bei Verwendung eines Stromverlängerungskabels für den AdderView GEM, muss darauf

geachtet werden, dass die Gesamtamperezahl der an dieses Kabel angeschlossenen

Geräte nicht den Amperenennwert des Kabels übersteigt. Auch darauf achten, dass die

Gesamtamperezahl aller an die Steckdose angeschlossenen Geräte nicht den

Amperenennwert der Steckdose überschreitet.

Komplette Handbuchversion Deutsche ist herunterladbar von:

www.addertec.comwww.addertec.com

AdderView GEM SPANISH

Guía rápida de instalación y funcionamiento

INSTALACIÓN RÁPIDA

Desconecte todos los ordenadores y conéctelos a los puertos NARANJA en la parte

posterior del AdderView GEM. Para mayor comodidad se recomiendan cables

combinados 3-en-1 teclado/vídeo/ratón. También están ampliamente disponibles cables

individuales normales adecuados para el teclado, el vídeo y el ratón.

Conecte el teclado, el monitor y el ratón al puerto GRIS en la parte posterior del

AdderView.

RESUMEN DE LA GUÍA DE FUNCIONAMIENTO

La configuración por defecto del AdderView es adecuada para la mayoría de los

sistemas.

Puede seleccionarse un ordenador utilizando la tecla del panel frontal, un ratón de tres

botones o una combinación de teclas rápidas en el teclado. Para seleccionar un

ordenador utilizando el ratón, pulse y suelte los botones izquierdo o derecho mientras

mantiene pulsado el botón del medio. Para seleccionar un ordenador utilizando las teclas

rápidas del teclado, mantenga pulsadas las teclas CTRL y ALT, pulse y suelte la tecla del

puerto requerida (p.e. 1) y a continuación suelte las teclas CTRL y ALT.

Información sobre seguridad

Solamente debe usarse en interiores, en entornos secos y sin grasa.

No intente realizar ningún tipo de mantenimiento al AdderView GEM usted mismo.

Siga todos los avisos e instrucciones marcadas en el AdderView GEM, el adaptador de

potencia opcional y todos sus accesorios.

Aviso – el adaptador de potencia opcional tiene piezas con tensión.

El adaptador de potencia opcional no contiene piezas que pueda mantener el usuario –

no desmontarlo.

Cambie el adaptador de potencia opcional solamente con un tipo aprobado por el

fabricante.

Si utiliza una cable de extensión con el AdderView GEM, compruebe que el amperaje

nominal total de los equipos enchufados en el cable de extensión no superen el amperaje

nominal del cable de extensión. Asimismo, compruebe que el amperaje nominal total de

todos los equipos conectados a la toma de red no superen el amperaje nominal de la

toma.

AdderView GEM FRENCH

Guide d'installation rapide et mode d'emploi

INSTALLATION RAPIDE

Mettez tous vos ordinateurs hors tension et raccordez-les aux ports ORANGE à l'arrière

d'AdderView GEM. Les câbles clavier/vidéo/souris Adder 3-in-1 sont recommandés pour

des raisons pratiques. Des câbles clavier, vidéo et souris standard se trouvent également

facilement sur le marché.

Raccordez votre clavier, moniteur et souris au port GRIS à l'arrière de l'AdderView.

MODE D'EMPLOI SOMMAIRE

La configuration par défaut de l'AdderView convient à la plupart des systèmes.

Pour sélectionner un ordinateur, utilisez la touche du panneau avant, une souris à trois

boutons ou une combinaison de touches de raccourci clavier. Pour sélectionner un

ordinateur à l'aide de la souris, maintenez la pression sur le bouton central et appuyez

sur le bouton gauche ou droite avant de relâcher. Pour sélectionner un ordinateur avec

les touches de raccourci clavier, maintenez les touches CTRL et ALT enfoncées,

appuyez sur la touche du port souhaité (ex. 1) et relâchez, puis relâchez les touches

CTRL et ALT.

Consignes de sécurité

A n'utiliser qu'à l'intérieur, dans un environnement sec et exempt d'huile.

Ne pas assurer soi-même l'entretien de l'AdderView GEM.

Observer tous les avertissements et instructions marqués sur l'AdderView GEM, son

adaptateur de courant optionnel et ses accessoires.

Avertissement – l'adaptateur de courant optionnel renferme des pièces sous tension.

L'adaptateur de courant optionnel ne contient aucune pièce devant être révisée par

l'utilisateur – ne pas le démonter.

Ne remplacer l'adaptateur de courant optionnel que par un adaptateur approuvé par le

fabricant.

Lorsqu'une rallonge est utilisée pour l'AdderView GEM, vérifier que l'intensité nominale

totale des périphériques branchés sur la rallonge ne dépasse pas l'intensité nominale du

câble. Par ailleurs, vérifier que l'intensité nominale totale de tous les périphériques

branchés sur la prise murale ne dépasse pas l'intensité nominale de la prise murale elle-

même.

Téléchargez une version Français complète de ce manuel :

www.addertec.comwww.addertec.com

AdderView GEM ITALIAN

Guida di installazione rapida e funzionamento

INSTALLAZIONE RAPIDA

Spegnere tutti i computer e collegarli alle porte ARANCIONI sul retro

dell’AdderView GEM. Per facilità consigliamo i cavi Adder combinati 3-in-1

tastiera/video/mouse. Sono pure disponibili cavi mouse, video e tastiera standard

individuali adatti.

Collegare la tastiera, monitor e mouse alla porta GRIGIA sul retro dell’AdderView.

SOMMARIO GUIDA OPERATIVA

La configurazione di default dell’AdderView è adatta alla maggior parte dei

sistemi.

Si può selezionare un computer usando il tasto sul pannello frontale, un mouse a

tre bottoni o una tastiera con tasti attivi. Per selezionare un computer con il

mouse, premere e rilasciare i bottoni sinistro o destro trattenendo

contemporaneamente quello centrale. Per selezionare un computer con tasti attivi

tastiera, tener premuti i tasti CTRL e ALT, premere e rilasciare il tasto porta

richiesta (es. 1) e quindi rilasciare i tasti CTRL e ALT.

Informazionoi riguardanti la sicurezza

Da usare esclusivamente in interni asciutti e privi di olio.

Non cercare di effettuare manutenzione sull’AdderView GEM.

Seguire tutti gli avvertimenti ed istruzioni presenti sull’AdderView GEM, sull’adattatore

opzionale di potenza e sugli accessori.

Attenzione – l’adattatore opzionale di potenza contiene parti sotto tensione.

L’adattatore opzionale di potenza non contiene parti soggette a manutenzione da parte

dell’utente – non smontarlo.

Sostituire l’adattatore opzionale di potenza solo con uno di tipo approvato dal produttore.

Se si usa una prolunga con l’AdderView GEM, controllare che la potenza nominale totale

in ampère dei dispositivi collegati alla prolunga non superi la potenza nominale in ampère

della prolunga stessa. Controllare inoltre che la potenza nominale totale in ampère dei

dispositivi collegati non superi la potenza nominale in ampère della presa a muro.

AdderView GEM

AdderView GEM Installation and Use Page 1

About this manual

AdderView GEM - Installation and Use

Part No. ADD0037/3 www.addertec.com

manual, Adder Technology Ltd assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information

contained herein. We reserve the right to change the specifications, functions and

circuitry of the product without notice. All trademarks acknowledged.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the AdderView GEM yourself.

Follow all warnings and instructions marked on the AdderView GEM, its optional

power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the AdderView GEM, make sure the total

ampere rating of the devices plugged into the extension cord does not exceed

the cord’s ampere rating. Also, make sure that the total ampere rating of all the

devices plugged into the wall outlet does not exceed the wall outlet’s ampere

rating.

AdderView GEM Installation and Use Page 2

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in

workmanship and materials for a period of one year from the date of original

purchase. If the product should fail to operate correctly in normal use during the

warranty period, Adder will replace or repair it free of charge. No liability can be

accepted for damage due to misuse or circumstances outside Adder’s control. Also

Adder will not be responsible for any loss, damage or injury arising directly or

indirectly from the use of this product. Adder’s total liability under the terms of this

warranty shall in all circumstances be limited to the replacement value of this

product.

If any difficulty is experienced in the installation or use of this product that you are

unable to resolve, please contact your supplier.

Trademarks

All trademarks mentioned in this manual are acknowledged to be the property of the

respective trademark owners.

Adder is a registered trademark of Adder Technology Limited.

Compaq is a registered trademark of Compaq Computer Corporation.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000 and ThinkPad are registered trademarks of

International Business Machines Corporation.

Logitech, MouseMan+ and Pilot Mouse+ are trademarks of Logitech Inc.

Microsoft and Windows are registered trademarks, and IntelliMouse is a trademark

of Microsoft Corporation.

Velcro is a trademark of Velcro USA Inc.

AdderView GEM Installation and Use Page 3

Radio Frequency Energy

Shielded cables must be used with this equipment to maintain compliance with radio

frequency energy emission regulations and ensure a suitably high level of immunity

to electromagnetic disturbances.

European EMC directive 89/336/EEC

This equipment has been tested and found to

comply with the limits for a class B computing

device in accordance with the specifications in

the European standard EN55022. These limits

are designed to provide reasonable protection

against harmful interference. This equipment

generates, uses and can radiate radio frequency

energy and if not installed and used in

accordance with the instructions may cause

harmful interference to radio or television

reception. However, there is no guarantee that

harmful interference will not occur in a particular

installation. If this equipment does cause

interference to radio or television reception,

which can be determined by turning the

equipment on and off, the user is encouraged to

correct the interference with one or more of the

following measures: (a) Reorient or relocate the

receiving antenna. (b) Increase the separation

between the equipment and the receiver. (c)

Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected. (d) Consult the supplier or an

experienced radio / TV technician for help.

FCC Compliance Statement (United States)

This equipment generates, uses and can radiate

radio frequency energy and if not installed and

used properly, that is, in strict accordance with

the manufacturer’s instructions, may cause

interference to radio communication. It has been

tested and found to comply with the limits for a

class A computing device in accordance with the

specifications in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable

protection against such interference when the

equipment is operated in a commercial

environment. Operation of this equipment in a

residential area may cause interference, in

which case the user at his own expense will be

required to take whatever measures may be

necessary to correct the interference. Changes

or modifications not expressly approved by the

manufacturer could void the user’s authority to

operate the equipment.

Canadian Department of Communications

RFI statement

This equipment does not exceed the class A

limits for radio noise emissions from digital

apparatus set out in the radio interference

regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de

bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la

classe A prescrites dans le règlement sur le

brouillage radioélectriques publié par le

ministère des Communications du Canada.

AdderView GEM Installation and Use Page 4

Contents

1. Introduction.................................................................................... 6

1.1 Key features...........................................................................................6

1.2 Package contents ..................................................................................7

1.3 Remote controller contents....................................................................7

1.4 Product information ...............................................................................8

2. Installation...................................................................................... 9

2.1 What you will need ................................................................................9

2.2 Mounting the AdderView GEM ..............................................................10

2.3 Connecting your devices .......................................................................10

2.4 ‘Interface powered' operation without the optional power adapter ........11

2.5 Configuring your PCs ............................................................................11

2.6 Configuring the AdderView GEM ..........................................................12

2.7 Summary of AdderView GEM configuration options..............................13

2.8 Resetting the AdderView GEM without disconnecting your devices......14

2.9 Other useful installation information ......................................................15

2.10 Re-enabling a disconnected PS/2 mouse ...........................................15

2.11 Hot plugging the AdderView GEM into running systems and

re-enabling disconnected PS/2 CPU mouse connections ...................16

2.12 Upgrading the AdderView's flash memory ..........................................17

3. Using the AdderView GEM ........................................................... 20

3.1 Power on status .....................................................................................20

3.2 Front panel keys and remote controller..................................................20

3.3 Status display.........................................................................................21

3.4 Keyboard hotkey control ........................................................................22

3.5 Mouse control.........................................................................................23

3.6 RS232 control ........................................................................................24

3.7 Cascading AdderView GEMs ................................................................24

3.8 Synchronising AdderView GEMs for multiple video head applications .24

AdderView GEM Installation and Use Page 5

4. AdderView GEM configuration options....................................... 27

4.1 Screen saver time delay ........................................................................27

4.2 Autoscan lock on mode and delay time ................................................27

4.3 Mouse mode and mouse switching of channels ....................................28

4.4 Keyboard hotkey combination ...............................................................29

4.5 Cycling between all channels or just the active channels .....................30

4.6 Firmware functions (version query, mouse restore and reset) ..............30

4.7 Setting a security password ..................................................................31

4.8 Cascade query code .............................................................................32

4.9 Resolving slow mouse problems ...........................................................32

4.10 Exit configure mode ............................................................................33

Appendices

A - Cable and connector specifications................................................................34

B - Problem solving ..............................................................................................38

AdderView GEM Installation and Use Page 6

1. Introduction

Thank you for purchasing the AdderView GEM. Your AdderView GEM is a high

performance keyboard, monitor and mouse sharing device which supports a wide

range of PC hardware and software platforms.

1.1 Key features

Control multiple PCs from a single keyboard, monitor and mouse.

Continuous keyboard and mouse emulation on all ports ensures problem free

computer bootup.

Interface powered operation – AdderView GEM draws its power from the

connected computers for maximum convenience.

Intelligent switching feature enables users to switch between all ports or just the

active ports.

Supports high bandwidth monitors at resolutions up to 1900 x 1440 with an

excellent video transfer characteristic - high bandwidth and low distortion.

Mixed AT/PS2 keyboards and PS2/RS232 mice supported as standard.

Flash upgradeable - AdderView GEM's firmware may be upgraded by connecting

a computer's serial port and running a download program.

Can be cascaded to provide a video switching network.

Video channels support Display Data Channel (DDC/DDC1/DDC2) signalling.

Password security prevents unauthorised use.

User options stored in EEPROM memory.

Remote control module for convenient operation.

Channel switching by front panel key, keyboard hotkey, or 3 button mouse.

Automatically restores keyboard and mouse states when channel changed.

Supports keyboard modes 1,2 and 3 and mouse prompt and stream modes for

maximum compatibility.

AdderView GEM Installation and Use Page 7

Can be controlled remotely via an RS232 serial port.

Includes screen saver, auto-scan and variable hotkey options.

Supports Microsoft IntelliMouse, IntelliMouse Explorer and other common wheel

mice.

Mouse restoration functions to enable ‘hot plugging’ of certain systems.

Keyboard, mouse and AdderView GEM resets may be performed without

disconnecting devices.

Supports IBM ThinkPad ‘Y’ cables.

Power and activity indication confirm correct operation.

Standard cable connections make installation easy and inexpensive.

All ports are active simultaneously – all PCs may all be booted at the same time.

Robust metal case ensures good shielding and video quality.

Supports desktop and laptop PCs, RS6000s, DEC Alphas, and Silicon Graphics

computers .

Supports very wide range of software including Windows 3.X, WFWG, 95, 98,

2000, NT, DOS, Unix, Linux, NetWare, OS/2, BSD etc.

Optional power adapter can be used for ‘video only’ or cascade applications.

1.2 Package contents

AdderView GEM.

This installation guide.

(Please note that a power adapter is NOT required for most applications and so is

not included. This may be purchased separately if required - part code

AVGPSU).

1.3 Remote controller contents (part code: RC1)

Remote control module.

Velcro strip for mounting remote controller.

AdderView GEM Installation and Use Page 8

1.4 Product information

Figure 1 - AdderView GEM front view

Figure 2 - AdderView GEM rear view (4 port model)

Figure 3 - Remote control pad / display (optional accessory - part RC1)

AdderView GEM Installation and Use Page 9

2. Installation

2.1 What you will need

Cables to connect the AdderView GEM to each of your PC keyboard, video and

mouse ports. Cable specifications are given in appendix A. (You do not need to

connect a mouse cable if you are not using the mouse).

A monitor with a standard VGA/SVGA (15 pin) connector that will work when

connected directly to each of your PCs. AdderView GEM supports low and high

resolution monitors.

A standard AT or PS/2 style keyboard. If you are using an AT keyboard with a 5

pin connector you may connect this to the AdderView GEM using a standard AT to

PS/2 keyboard adapter.

A PS/2 style two or three button Microsoft

or Logitech

compatible mouse or a

Microsoft IntelliMouse / IntelliMouse Explorer compatible mouse. If you wish to use

the mouse to switch the AdderView GEM's channel then you will need a three button

mouse or an IntelliMouse.

(The AdderView GEM supports ‘Internet Mice’ that are compatible with the Microsoft

IntelliMouse. These are fitted with a wheel or other scroll control and sometimes

have additional buttons. Examples are: Microsoft IntelliMouse, Logitech Pilot

Mouse+, Logitech MouseMan+, Genius NetMouse and Genius NetMouse Pro.)

A suitable mouse driver for your PCs. Supported types are:

- PS/2 or RS232 two button mouse driver (any manufacturer).

- Microsoft mouse driver (including IntelliMouse).

- Logitech mouse driver (including two button, three button and wheel mouse)

Use of PS/2 and RS232 style mice with the AdderView GEM - All of the mouse

connections from AdderView GEM to PCs support either a PS/2 or an RS232

mouse. AdderView GEM automatically converts from the PS/2 mouse commands to

RS232 serial mouse commands. Serial mice types are selected by using an adapter

as described in Appendix A. The AdderView GEM will operate without a mouse

connected if you do not wish to use one.

AdderView GEM Installation and Use Page 10

2.2 Mounting the AdderView GEM

The AdderView GEM has been designed for use on a desktop or shelf in close

proximity to the user’s monitor and peripherals. The optional remote controller may

be used if you wish to locate the AdderView GEM on a desk or shelf that is some

distance from the monitor and peripherals.

2.3 Connecting your devices

Ensure that the optional power adapter is disconnected from the AdderView GEM

and that all the devices which are to be attached are switched off. Connect the

shared keyboard, PS/2 mouse and monitor to the connectors at the rear of the

AdderView GEM (see figs 1, 2 and 3). Next, connect each computer system unit in

turn with the keyboard cable, mouse cable and video cable. Adder 3-in-1

keyboard/video/mouse cables are recommended for maximum convenience. Any

unused computer connections can be left unconnected. To connect computers with

serial mouse connections and AT style keyboard connections use the adapters

specified in appendix A. If you have an existing 6-pin mini-DIN to 9-pin serial adapter

that came with a mouse it may not be suitable for use with the AdderView as there

are several different standard wiring configurations for these adapters.

The AdderView GEM is now ready for use and will start to operate as soon as one of

the attached PCs is powered on. If you are connecting to PCs using cables that are

longer than 5 metres or are cascading the AdderView GEM to another AdderView

GEM you will need to use the optional power adapter. When using the optional

power adapter, ensure that it is connected to the mains and powering the AdderView

GEM before you switch on the connected computers. Failure to switch the

AdderView GEM and computers on in the correct order can lead to the mouse

and/or keyboard not being recognised by the computers when they are switched on.

AdderView GEM Installation and Use Page 11

2.4 ‘Interface powered’ operation without the optional power

adapter

The AdderView GEM draws its power from the connected computers via the

keyboard cables. A single keyboard connection is normally sufficient to power the

AdderView GEM provided that the cable is no longer than 5 metres. If more than

one computer is connected then the power will be intelligently drawn from all

computers. Cables longer than 5 metres may be used provided that the AdderView

GEM is already powered by another connected computer or the optional power

adapter. If you are cascading the AdderView GEM to another AdderView GEM then

a power adapter must be connected to all AdderView GEMs.

2.5 Configuring your PCs

Configure your PC in the same way that you would if your keyboard, mouse and

monitor were all connected directly to your PC. AdderView GEM emulates Microsoft

compatible serial, IntelliMouse, IntelliMouse Explorer and PS/2 mice, so ensure that

your PC software is configured for a Microsoft mouse of the correct type. Refer to

the list of supported drivers in section 2.1.

2.6 Configuring the AdderView GEM

The AdderView GEM is supplied pre-configured with factory defaults which are

suitable for most applications. There are a number of more advanced options which

can be set by the user. These are stored in the AdderView GEM's EEPROM

memory and are retained when the power is disconnected.

The options may be changed whilst the AdderView GEM is in configure mode. You

may enter configure mode at initial power on or whilst the AdderView GEM is

running:

AdderView GEM Installation and Use Page 12

To enter configure mode at power on:

Switch off all the attached PCs and the AdderView GEM. Hold down the front panel

key whilst powering on the AdderView GEM. Remember that the AdderView GEM

draws its power from any attached PC via the keyboard cable and so will power itself

on when the attached PC is switched on or when the optional power adapter is

connected. Do not release the key until the AdderView GEM displays 'C' to show

that it has entered configure mode.

To enter configure mode whilst the AdderView GEM is running:

Hold down the front panel key for 5 seconds until the front panel display shows ‘C’.

In configure mode, options are entered by typing a letter followed by a number

followed by (return). Use ESC to abort the entry of an option. The AdderView GEM

will remain in configure mode until you type 'E' (return).

For example: to set hotkey option 2 type the following at the 'C' prompt

(at AdderView GEM 'C' prompt) HH 22

To exit configure mode type: EE

2.7 Summary of AdderView GEM configuration options

Full details of each of the configuration options and their uses are given in section 4.

B1 - screen saver disabled (default)

B2 - Blank screen after 1 minute of inactivity

B3 - Blank screen after 2 minutes of inactivity

B4 - Blank screen after 4 minutes of inactivity

B5 - Blank screen after 8 minutes of inactivity

B6 - Blank screen after 12 minutes of inactivity

B7 - Blank screen after 16 minutes of inactivity

B8 - Blank screen after 20 minutes of inactivity

AdderView GEM Installation and Use Page 13

L1 - AdderView GEM locks on to active ports only during autoscanning (default)

L2 - AdderView GEM locks on to every port during autoscanning

L3 - AdderView GEM powers on in autoscan mode and locks on to active ports only

L4 - AdderView GEM powers on in autoscan mode and locks on to all ports

L5 – Allow the mouse to run at any speed (default)

L6 – Don't allow the mouse to run at very slow speeds

L7 - Cascade query code = AD (default)

L8 - Cascade query code = EF

T1 - 2 seconds autoscan delay time before switching to next port (default)

T2 - 5 seconds autoscan delay time before switching to next port

T3 - 7 seconds autoscan delay time before switching to next port

T4 - 10 seconds autoscan delay time before switching to next port

T5 - 15 seconds autoscan delay time before switching to next port

T6 - 20 seconds autoscan delay time before switching to next port

T7 - 30 seconds autoscan delay time before switching to next port

T8 - 60 seconds autoscan delay time before switching to next port

U1 - AdderView GEM channels are switchable using a 3 button mouse

or IntelliMouse (default)

(AdderView GEM reports 2 button mouse mode to PCs)

U2 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports 2 button mouse mode to PCs)

U3 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports 3 button mouse mode to PCs)

U4 - AdderView GEM channels are switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports IntelliMouse mode to PCs)

U5 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports IntelliMouse mode to PCs)

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button

mouse (default)

U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three

button mouse

La pagina sta caricando ...

ADDER GEMAV2GEM Manuale utente

Marca: ADDER

Modello: GEMAV2GEM

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: ADDER GEMAV2GEM User manual

ADDER GEMAV2GEM Manuale utente

ADDER GEMAV2GEM Manuale utente

in altre lingue

Documenti correlati

Altri documenti