TomTom One 130 Manuale utente

TomTom ONE

What’s in the box1.

2

What’s in the box

* Not included with all products.

EasyPort

TM

mount

Car Charger

RDS-TMC Traffic Receiver*

Documentation pack

USB cable

TomTom ONE

Getting started2.

3

Getting started

Install your TomTom ONE in your car following the instructions on the

installation poster at the start of this book.

To switch on your TomTom ONE, press and hold the On/Off button for 2

seconds. The first time you switch on your device, it may take a short while to

start.

You have to answer a few questions to set up your device.

Having problems?

In rare cases, your ONE may not start correctly or may stop responding to

your taps.

First, check that the battery is charged properly. To fully charge the battery,

you need to charge it for at least 2 hours.

If this doesn’t work, you can reset your device. To do this, press and hold the

Power button for fifteen seconds. Release the Power button when device

begins to restart.

Charging your TomTom ONE

Before you use your ONE for the first time, it’s a good idea to charge it fully

using the home charger, which takes about 2 hours.

There is no charging light on your ONE. To check the battery status and see

when your ONE is charging, switch on your device and tap the bottom right-

hand corner of the screen in the Driving View. The battery status is shown on

the next page.

Improving reception

If your TomTom ONE takes longer than 5 minutes to find your current

position, make sure that the device is in an open space away from tall objects

such as buildings or trees.

When you connect your TomTom ONE to your computer, you can use

TomTom HOME to download information about GPS satellite positions during

the next 7 days. This helps your ONE to find your position faster.

Important: Some vehicles have heat reflective shielding in the windshield.

This may prevent your ONE from locating your current position.

Take care of your TomTom ONE

Never leave your TomTom ONE or accessories in view when you leave the car

or they may become an easy target for thieves.

4

You can set a password for your TomTom ONE which must be entered every

time you start your ONE.

It is important to take care of your ONE.

• Your ONE is not designed for use in extreme temperatures and any such

exposure may cause permanent damage.

• Do not open the casing of your ONE under any circumstances. Doing so

may be dangerous and will invalidate the warranty.

• Wipe or dry the screen of your ONE using a soft cloth. Do not use any liquid

cleaners.

Driving View3.

5

Driving View

When your TomTom ONE starts, you are shown the Driving View along with

detailed information about your current location.

Tap the center of the screen at any time to open the Main Menu.

Note: The Driving View is shown in black and white until your ONE locates

your current position.

A Tap + and - to zoom in and out.

B Your current position.

C The name of the next major road or road sign information, if applicable.

D Traffic bar - requires an RDS-TMC Traffic Receiver (available as an

accessory).

E Navigation instruction for the road ahead.

Tap this area to repeat the last spoken instruction and to change the

volume.

F The name of the street you are on.

G Information about your trip such as trip time, remaining distance and arrival

time.

To change the information shown, tap Status bar preferences in the

Preferences menu.

H GPS signal strength.

Making your first trip4.

6

Making your first trip

Planning a route with your TomTom ONE is easy. To plan your first route,

follow the steps below.

Important: You should always plan your journey before you start driving. It is

dangerous to plan a route while driving.

1. Tap the screen to bring up the main menu.

Note: The buttons on your ONE are shown in full color unless a button is

currently unavailable. For example, the button named Find alternative... in

the Main Menu is not available until you have planned a route.

2. Tap Navigate to...

3. Tap Address.

When you enter an address, you can choose from the following options:

• City center - tap this button to set your destination as the center of a city

or town.

• Street and house number - tap this button to set an exact address as your

destination.

• ZIP code - tap this button to enter a ZIP code as your destination.

Note: You can enter a ZIP code for any country. In the UK and the Netherlands,

ZIP codes are detailed enough to identify a house on their own. In other

7

countries you can enter a ZIP code to identify a town or area. You will then

have to enter a street and house number.

• Cross street or intersection - tap this button to set your destination as the

point where two streets meet.

In this example, we will enter an exact address.

4. Tap Street and house number.

Note: When planning a trip for the first time your ONE asks you to choose a

country. Your choice is saved and used for all routes you plan.

You can change this setting at any time by tapping the country flag.

5. Start to type the name of the town where you want to go.

As you type, the names of the towns that match what you have typed are

shown. When your destination appears in the list, tap the name of the town

to set the destination.

6. Start to type the name of the street and select it when it is shown.

As with the name of the town, the names of the streets that match what you

have typed are shown. When your destination appears in the list, tap the

name of the street to set the destination.

7. Now enter the house number of your destination and then tap Done.

8. Your ONE asks if you need to arrive at a particular time. For this exercise,

tap NO.

8

The route is calculated by your ONE.

9. When the route has been calculated, tap Done.

Your ONE will immediately begin to guide you to your destination, using both

spoken instructions and on-screen directions.

Arrival times

When you plan a route, your TomTom ONE asks you if you need to arrive at a

particular time.

Tap YES to enter a preferred arrival time.

Your ONE calculates your arrival time and shows you whether you will arrive

on time.

You can also use this information to work out when you need to leave. If your

ONE shows that you will arrive 30 minutes early, you can wait and leave in 30

minutes time, rather than arrive early.

Your arrival time is constantly recalculated during your trip. The status bar

shows whether you will arrive on time or if you are going to be late, as shown

below:

You will arrive 55 minutes before the arrival time you entered.

If the estimated arrival time is more than five minutes before

the time you entered, it is shown in green.

You will arrive 3 minutes before the arrival time you entered.

If the estimated arrival time is less than 5 minutes before the

time you entered, it is shown in yellow.

You will arrive 19 minutes late.

If the estimated arrival time is later than the time you entered,

it is shown in red.

Status bar

preferences

Tap Status bar preferences in the Preferences menu, to enable or disable

arrival time notifications.

Select the required options on the first menu screen and then tap Done.

To enable arrival time notifications, select Show leeway to arrival time.

9

What are the other navigation options?

When you tap Navigate to..., you can set your destination in many ways, not

just by entering the address. The other options are listed below:

Planning a route in advance

You can also use your ONE to plan trips in advance by selecting both your

starting point and your destination. You could, for example, do the following:

• Find out how long a trip is going to take before you start.

• Check the route of a trip you are planning.

Home

Tap this button to navigate to your Home location.

You will probably use this button more than any other.

Favorite

Tap this button to select a Favorite as your destination.

Address

Tap this button to enter an address as your destination.

Recent

destination

Tap this button to select your destination from a list of places you have

recently used as destinations.

Point of

Interest

Tap this button to navigate to a Point of Interest (POI).

Point on map

Tap this button to select a point on the map as your destination using the

map browser.

Latitude

Longitude

Tap this button to enter a destination using latitude and longitude values.

Position of

last stop

Tap this button to select your last recorded position, as your destination.

2

3

1

2

10

• Check a route for someone who is coming to visit you so you can explain

the route to them.

To plan a route in advance, follow these steps:

1. Tap the screen to bring up the main menu.

2. Tap the arrow button to move to the next menu screen and tap Prepare

route.

3. Select the starting point for your trip in the same way that you would select

your destination.

4. Set the destination for your trip.

5. Choose the type of route that should be planned.

• Fastest route - the route which takes the least time.

• Shortest route - the shortest distance between the locations you set. This

may not be the quickest route, especially if the shortest route is through

a town or city.

• Avoid freeways - a route which avoids freeways.

• Walking route - a route designed for making the trip on foot.

• Bicycle route - a route designed for making the trip on a bicycle.

• Limited speed - a route for a vehicle which can only be driven at a limited

speed. You have to specify the maximum speed.

6. Your TomTom ONE plans the route between the two locations you

selected.

More information about a route

You can access these options for the route you last planned by tapping the

Details button on the route summary screen.

You can then select from the following options:

Prepare route

Browse as

text

Tap this button for a list of all the turn instructions on the route.

This is very useful if you need to explain a route to someone else.

Browse as

images

Tap this button to see each turn in the trip. Tap the right and left arrows to

move forwards and backwards through the trip.

Tap the screen to turn off the 3D display and view the map from above.

Browse map

of route

Tap this button to see an overview of the route using the map browser.

11

Show route

summary

Tap this button to open the route summary screen.

Finding alternative routes5.

12

Finding alternative routes

Once you have planned a route, you may want to change something about the

route, without changing your destination.

Why change the route?

Maybe for one of these reasons:

• You can see a roadblock or a line of traffic ahead.

• You want to travel via a particular location, to pick someone up, stop for

lunch or fill up with gas.

• You want to avoid a difficult intersection or a road you don’t like.

Find alterna-

tive...

Tap Find alternative... in the Main Menu to change the route that is

currently planned.

Then tap one of the options below.

Calculate

alternative

Tap this button to calculate an alternative to the route already planned.

Your ONE will look for another route from your current location to your

destination.

If you decide you would prefer to use the original route after all, tap

Recalculate original.

Why would I need to do this?

Apart from the roads near your position and near your destination, the new

route will use totally different roads to reach your destination. This is an

easy way of calculating a totally different route.

Avoid

roadblock

Tap this button if you can see a roadblock or a line of traffic ahead. You then

have to choose how much of the route ahead you want to avoid.

Choose from the different options: 100m, 500m, 2000m, 5000m. Your ONE

will recalculate your route avoiding the section of the route for the distance

you selected.

Don’t forget that once a new route is calculated, you may have to turn off

the road you are on very soon.

If the roadblock suddenly clears, tap Recalculate original to return to your

original route.

13

Travel via...

Tap this button to change your route so that it passes a particular location,

perhaps to pick someone up on the way.

You choose the location you want to pass in the same way as you choose a

destination. So you can select from all the same options: for example,

Address, Favorite, Point of Interest and Point on map.

Your ONE will calculate a new route to your destination that passes the

location you chose. Unlike your final destination, your ONE does not inform

you when you pass by this location.

Recalculate

original

Tap this button to return to the original route without deviations to avoid

roadblocks or traveling via particular locations.

Avoid part of

route

Tap this button to avoid a part of the route. Use this button if you see that

your route includes a road or junction you don’t like, or which is well-

known for traffic problems.

You then choose the road you want to avoid from a list of the roads on your

route.

Minimize

delays

Tap this button to recalculate your route so that it avoids traffic problems as

much as possible. Your ONE will check if there are any traffic problems on

your route and work out the best route to avoid the problems.

Note: This button is only available with TomTom Traffic enabled.

Sounds and voices6.

14

Sounds and voices

The sound on your TomTom ONE is used for features such as:

• Spoken instructions

• Warnings

How do I change the volume level?

You can change the volume in three ways:

• Tap the bottom left hand area of the Driving View. The last spoken

instruction is repeated and the volume level is shown.

Move the volume slider to adjust the volume.

• In the Main Menu, tap Change preferences, then tap Volume preferences.

Tap Test to check your changes.

Selecting a voice

Voice

preferences

To change the voice being used by your TomTom ONE, tap Voice

preferences in the Preferences menu, then tap Change voice. Select a voice

from the list.

Help me!7.

15

Help me!

Help me! provides an easy way to navigate to emergency services centers and

other specialist services and contact them by phone.

For example, if you are involved in a car accident, you could use Help me! to

call the nearest hospital and tell them your exact location.

How do I use Help me! to call a local service?

You can use Help me! to find and make contact with a service center.

To use Help me! to locate a service center, contact the center by phone and

navigate from your current location to the center, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Help me!

3. Tap Phone for help.

4. Select the type of service you require, for example, Nearest hospital.

5. To dial, select a center from the list, the nearest is shown at the top of the

list.

Once the call is answered your ONE shows your position on the map along

with a description of the location. This helps you explain where you are

while making a call.

6. To navigate your way to the center on foot, tap Walk there.

Your ONE starts guiding you to your destination.

16

Options

Phone for help

Use your TomTom ONE to find the location of a service and the contact

details.

• Emergency services

• Emergency breakdown services

• Nearest police station

• Nearest doctor

• Nearest hospital

• Nearest public transport

• Nearest car repair services

• Nearest dentist

• Nearest pharmacy

• Nearest vet

Note: In some countries, information may not be available for all services.

Drive to help

Use your TomTom ONE to navigate your way by road to a service center.

• Nearest car repair services

• Nearest hospital

• Nearest doctor

• Nearest police station

• Nearest pharmacy

• Nearest dentist

Note: In some countries, information may not be available for all services.

Walk to help

Use your TomTom ONE to navigate your way on foot to a service center.

• Nearest gas station

• Nearest public transport

• Nearest police station

• Nearest pharmacy

• Home

• Nearest doctor

Note: In some countries, information may not be available for all services.

Where am I?

Your TomTom ONE shows your current location.

You can then tap Phone for help to select the type of service you want to

contact.

17

First Aid

Guide

Tap this button to read the British Red Cross First Aid guide.

Other guides

Tap this button to read a selection of useful guides.

Favorites8.

18

Favorites

What are Favorites?

Favorites are places that you often visit. You can create Favorites so that you

don’t have to enter the address every time you want to navigate there.

They don’t have to be places you especially like, just useful addresses.

How can I create a Favorite?

From the Main Menu, tap Add Favorite.

Note: The button Add Favorite may not be shown on the first page of the Main

Menu. Tap the arrow to open other pages in the Main Menu.

You can then select the location of the Favorite from the list below.

Give your Favorite a name that is easy to remember. Your ONE will always

suggest a name, usually the address of the Favorite. To enter the name, just

start typing. You don’t have to delete the suggested name.

Home

You can set your Home location as a Favorite.

Favorite

You cannot create a Favorite from another Favorite. This option will always

be unavailable in this menu.

To rename a Favorite, tap Manage Favorites in the Preferences menu.

Address

You can specify an address to be a Favorite. When you enter an address,

you can choose from four options.

• City center

• Street and house number

• ZIP code

• Crossing or intersection

2

3

1

2

19

Recent

destination

Select a Favorite location from a list of places you have recently used as

destinations.

Point of

Interest

You can add a Point of Interest (POI) as a Favorite.

Does it make sense to do this?

If you visit a POI you particularly like, for example a restaurant, you can add

it as a Favorite.

To add a POI as a Favorite, tap this button, then do the following:

1. Narrow your choice of POIs by selecting the area where the POI is.

You can select one of these options:

• POI near you - to search from a list of POIs near your current position.

• POI in city - to choose a POI in a particular town or city. You have to

specify a town or city.

• POI near Home - to search from a list of POIs near your Home

location.

If you are currently navigating to a destination, you can also select from

a list of POIs which are on your route or near your destination. Choose

one of these options:

• POI along route

• POI near destination

2. Select the category of POI.

Tap the category of POI if it is shown or tap the arrow to choose from

the complete list.

Tap Any POI category to search for a POI by name.

My location

Tap this button to add your current position as a Favorite.

For example, if you stop somewhere interesting, while you are there you

can tap this button to create the Favorite.

Point on map

Tap this button to create a Favorite using the map browser.

Select the location of the Favorite using the cursor, then tap Done.

Latitude

Longitude

Tap this button to create a Favorite by entering latitude and longitude

values.

Position of

last stop

Tap this button to select your last recorded position as your destination.

20

How can I use a Favorite?

You will normally use a Favorite as a way of navigating to a place without

having to enter the address. To navigate to a Favorite, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Navigate to...

3. Tap Favorite.

4. Select a Favorite from the list.

Your ONE calculates the route for you.

5. When the route is calculated, tap Done.

Your ONE will immediately start guiding you to your destination with spoken

instructions and visual instructions on the screen.

How can I change the name of a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites.

4. Tap the Favorite you want to rename.

5. Tap Rename.

How can I delete a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites.

4. Tap the Favorite you want to delete.

5. Tap Delete.

La pagina si sta caricando...

TomTom One 130 Manuale utente

Questo manuale è adatto anche per

TomTom One 130 Manuale utente

in altre lingue

Documenti correlati

Altri documenti