Proxima ASA DP1200x Manuale utente

DP1200x

Personal projection. Perfected.

User’s Guide

InFocus Corporation

27700B SW Parkway Avenue

Wilsonville, Oregon 97070-9215

1-800-294-6400

•

503-685-8888

Fax: 503-685-8887

http://www.infocus.com

In Europe:

InFocus International B.V.

Strawinskylaan 585

1077 XX Amsterdam,The Netherlands

Phone: +31 20 579 2000

Fax: +31 20 579 2999

In Asia:

238A Thomson Road

#18-01/04 Novena Square

Singapore 307684

Telephone: (65) 6334-9005

Fax: (65) 6333-4525

DP1200x

6160DP1200x_Cover.qxd 5/1/03 11:12 AM Page 1

This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, Fren

ch, German, Italian, Norwe-

gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, ple

ase read these instructions.

Le mode d'emploi complet est disponible sur le CD joint sous forme de fichier pdf d'Adobe Acrobat dans les langues suivantes :

anglais, français,

allemand, italien, norvégien, portugais, espagnol, russe, japonais, coréen, chinois traditionnel, chinois simplifié. Avant d'ut

iliser ce projecteur, veuillez

lire ces instructions.

Die vollständige Benutzeranleitung ist auf der im Lieferumfang enthaltenen CD als Adobe Acrobat PDF-Datei in den folgenden Spra

chen verfügbar:

Englisch, Französisch, Deutsch, Italienisch, Norwegisch, Portugiesisch, Spanisch, Russisch, Japanisch, Koreanisch, Traditionell

es Chinesisch und

Vereinfachtes Chinesisch. Bitte lesen Sie diese Anweisungen vor der Verwendung des Projektors.

La presente guida è disponibile sul CD allegato, come file Adobe Acrobat pdf, nelle seguenti lingue: inglese, francese, tedesco

, italiano, norvegese,

portoghese, spagnolo, russo, giapponese, coreano, cinese tradizionale e cinese semplificato. Prima di usare questo proiettore,

leggere le seguenti istruzioni.

Hele denne brukerhåndboken finnes på den vedlagte CD-en som en Adobe Acrobat pdf-fil på følgende språk: Engelsk, fransk, tysk,

italiensk, norsk,

portugisisk, spansk, russisk, japansk, koreansk, tradisjonell og forenklet kinesisk. Les diss anvisningene før projektoren tas

i bruk.

Este guia do usuário completo está disponível no CD anexo, como um arquivo pdf do Adobe Acrobat nos seguintes idiomas: inglês,

francês, alemão, italiano,

norueguês, português, espanhol, russo, japonês, coreano, chinês tradicional, chinês simplificado. Antes de utilizar este projet

or, leia estas instruções.

Este manual de uso está disponible en su totalidad en el CD incluido, como archivo pdf de Adobe Acrobat, en los siguientes idio

mas: inglés, frances, alemán,

italiano, noruego, português, español, ruso, japonés, coreano, chino tradicional, chino simplificado. Antes de usar el proyecto

r, lea estas instrucciones.

Ⱦɚɧɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ ɜ ɩɨɥɧɨɦ ɨɛɴɟɦɟ ɩɪɟɞɫɬɚɜɥɟɧɨ ɧɚ ɩɪɢɥɚɝɚɟɦɨɦ ɤɨɦɩɚɤɬ-ɞɢɫɤɟ ɜ ɜɢɞɟ pdf-ɮɚɣɥɚ Adobe Acrobat ɧɚ ɫɥɟɞɭɸɳɢɯ

ɹɡɵɤɚɯ: ɚɧɝɥɢɣɫɤɨɦ, ɮɪɚɧɰɭɡɫɤɨɦ, ɧɟɦɟɰɤɨɦ, ɢɬɚɥɶɹɧɫɤɨɦ, ɧɨɪɜɟɠɫɤɨɦ, ɩɨɪɬɭɝɚɥɶɫɤɨɦ, ɢɫɩɚɧɫɤɨɦ, ɪɭɫɫɤɨɦ, ɹɩɨɧɫɤɨɦ, ɤɨɪɟɣɫɤɨɦ,

ɬɪɚɞɢɰɢɨɧɧɨɦ ɢ ɭɩɪɨɳɟɧɧɨɦ ɤɢɬɚɣɫɤɨɦ. ɉɟɪɟɞ ɢɫɩɨɥɶɡɨɜɚɧɢɟɦ ɩɪɨɟɤɬɨɪɚ, ɩɪɨɱɢɬɚɣɬɟ ɞɚɧɧɵɟ ɢɧɫɬɪɭɤɰɢɢ.

ŘųKПП .ŴЕ<R$Ű֞ඤŜūŉƐ CD Ű Adobe Acrobat ų PDF :P཯༜ŭŜūऄⲟŚƑūŉƃŞЖᜑų➸⠰ųKПП 

.Ɨřߓ᰻ŉŤťŖƃŞЖ␣⠰Е:NX⠰Е.)⠰Е$O⠰Е3PП⠰ЕBP-P⠰Е?X⠰ЕR⠰ЕᎣᒍ⠰Е⺩

ઞ⠰Е‱ת

Ԟઞ⠰Е↭תԞઞ⠰ЖŘų<R$Ɨ؃᰻ŞƐ߰ŰЕKПП .Ɨ྿şŏ⠿ƄŔťŚŉЖ

&' $GRE H$ FU RE DW S GI 

 

Adobe Acrobat (PDF)

동봉된 CD에는 Adobe Acrobat pdf 파일 형식의 사용 설명서가 영어, 프랑스어, 독일어, 이탈리아어, 노르웨이어, 포르투갈어, 스페인어, 러시아어, 일본어, 한국

어, 중국어(번체 및 간체)로 제공됩니다. 이 프로젝터를 사용하기 전에 다음 지침을 읽으십시오.

2

Declaration of Conformity

Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon

97070 USA

European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands

We declare under our sole responsibility that the projector conforms to the following

directives and norms:

EMC Directive 89/336/EEC, Amended by 93/68/EEC

EMC: EN 55022

EN 55024

EN 61000-3-2

EN 61000-3-3

Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC

Safety: EN 60950: 2000

July, 2002

Trademarks

Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple

Computer, Inc. IBM is a trademark or registered trademark of International Business

Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered

trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or regis-

tered trademarks of Adobe Systems Incorporated. Digital Light Processing is a trade-

mark or registered trademark of Texas Instruments. InFocus and LP are trademarks

or registered trademarks of InFocus Corporation.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is oper-

ated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruc-

tion manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Remote Control Warning

Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote

control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.

Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.

Do not look into the laser beam emitted

from the top of the remote control.

3

Table of Contents

Introduction 5

Connecting a computer 6

Required computer connections 6

Displaying a computer image 7

First-time projector use with Windows 98 8

Adjusting the image 10

Connecting a video device 11

Displaying a video image 12

Shutting down the projector 14

Troubleshooting your setup 14

Using the keypad buttons 22

Using the remote control 23

Using the audio 24

Optimizing computer images 25

Presentation features 25

Optimizing video images 26

Customizing the projector 26

Using the menus 27

Picture menu 28

Settings menu 31

Maintenance 34

Cleaning the lens 34

Replacing the projection lamp 35

Appendix 37

Accessories 37

Red LED Behavior and Projector Errors 38

If you are experienced in setting up presentation systems, use the Quick Set

Up card that was included in the box. For complete details on connecting

and operating the projector, refer to this User’s Guide. Electronic versions of

this User’s Guide in multiple languages are available on the included CD

and on our website.

The website also has technical specifications (an interactive image size cal-

culator, laptop activation commands, connector pin outs, a glossary, the

product data sheet), a web store to buy accessories, and a page for online

registration. See the inside of the back cover for a list of all contact numbers

and relevant web addresses.

Important Operating Considerations

Do not place the projector on a tablecloth or other soft covering that may

block the vents. Intake vents are placed along the left, front and back sides

of the projector.

Exhaust vents are placed along the right side of the projec-

tor. In the unlikely event that the lamp ruptures, discard any edible items

and thoroughly clean the area along the right side of the projector.

2 ft (.6m)

Do not place objects in the area along the right side of the projector

4

5

Introduction

Your new digital projector packs great performance into a shape and size

customized for the mobile professional. It fits comfortably in your laptop

bag then transitions easily into your presentation environment. It is easy to

connect, easy to use, and easy to maintain.

Projector components and features

documentation

remote

computer

cable

projector

power

cable

audio cable adapter

audio cable

S-video cable

S-video to composite adapter

protective sleeve

accessory pouch

lens cap*

* the lens cap with tether ships in the accessory pouch. Insert the tether into the small

hole under the lens when you unpack your projector.

SCART adapter

keypad

connectors

elevator foot release

zoom

focus

lens cap

IR receiver

for remote

computer

s-video

audio

power cord

6

Connecting a computer

Required computer connections

Connect the black end of the computer cable to the Computer in connector

on the projector. Connect the blue end to the video (VGA) port on your com-

puter. If you are using a desktop computer with a single VGA port, you first

need to disconnect the monitor from that computer’s video port.

Connect the black power cable to the connector on the side of the projector

and to your electrical outlet.

The Power LED on the projector’s keypad turns solid green and the fans

start to run.

NOTE: Always use the power cable that shipped with the projector.

Optional computer connections

To advance slides in a PowerPoint™ presentation using the remote, plug the

USB connector on the computer cable into the USB mouse connector on

your computer. USB drivers must be installed to use the USB feature. For

more information, see page 9.

To have sound with your presentation, connect the audio cable to your com-

puter and to the computer Audio In connector on the projector.

connect computer cable

connect power cable

connect USB portion of

computer cable

connect audio cable

7

Displaying a computer image

Remove the lens cap.

Press the Power button on the top of the projector.

The LED flashes green. When the lamp comes on, the startup screen is dis-

played and the LED is steady green. It can take a minute for the image to

achieve full brightness.

? No startup screen? Get help on page 15.

Turn on your computer.

The computer’s image should appear on the projection screen. If it doesn’t,

press the Source button on the projector’s keypad.

Make sure your laptop’s external video port is active.

Many laptops do not automatically turn on their external video port when a

projector is connected. Refer to your computer’s documentation to learn the

activation commands specific for your computer. For example, some lap-

tops use a key combination of FN + F5 to turn the external display on and

off.

? No computer image? Try pressing the Auto Image

button on the keypad. Get help on page 16.

remove lens cap

press Power

turn on computer

source

activate laptop’s external port

8

First-time projector use with Windows 98

The first time you connect a computer running Windows 98 to the projector,

the computer recognizes the projector as “new hardware” and the Add

New Hardware Wizard appears. Follow these instructions to use the Wiz-

ard to load the correct driver (which was installed with your Windows

operating system).

If you are running Windows 2000, Windows ME, or Windows XP, skip these

steps and go to “Adjusting the image” on page 10.

a Click Next to begin searching for the driver.

b Make sure “Search for the best driver” is selected, then click Next.

c Uncheck any checked boxes, then click Next. Windows automatically

locates the driver. If this driver has been removed, reload the driver using

your Windows operating system CD.

d When Windows finds the driver, you are ready to install it. Click Next.

a

b

c

d

9

Skip this page if you did not connect the USB portion of the computer

cable. The USB connection enables slide advance during presentations

and projector control software.

For Windows 98:

• If you connected the USB cable, the Add New Hardware Wizard

appears again. Drivers must be installed to use the USB functionality.

• The Wizard launches three times.

The first time it detects a USB Composite Device.

The second time a USB Human Interface Device (for the keyboard).

The third time it detects a USB Human Interface Device (for the

mouse).

For Windows 2000, Windows ME, and Windows XP:

• The USB drivers are automatically installed.

10

Adjusting the image

Adjust the height of the projector, if necessary, by pressing the release but-

ton to extend the elevator foot.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen.

See page 38 for a table listing screen sizes and distances.

Adjust the zoom tab or the focus dial by rotating them until the desired

image size and sharpness are produced.

If the image is not square, adjust the keystone by using the buttons on the

keypad.

Press the upper Keystone button to reduce the upper part of the image, and

press the lower Keystone button to reduce the lower part.

Adjust the Contrast or Brightness in the Picture menu.

See page 27 for help with the menus.

adjust height

release button

adjust distance

adjust zoom and focus

focus

zoom

adjust keystone

adjust Contrast or Brightness

11

Connecting a video device

Standard video connections

Plug the S-video cable’s connector into the S-video-out connector on the

video device. Plug the other connector into the S-Video connector on the

projector.

Plug the white connector of the audio adapter into the left audio out con-

nector on the video device and plug the red connector into the right audio

out connector on the video device.

Plug the audio cable into the other end of the audio cable adapter and into

the audio in connector on the projector.

Connect the black power cable to the connector on the side of the projector

and to your electrical outlet. The Power LED on the keypad turns solid

green and the fans start to run.

NOTE: Always use the power cable that shipped with the projector.

Optional video connections

If the video device uses a composite video connector, plug a composite

video cable (sold separately) into the composite connector on the video

device and into the S-video adapter. Plug the S-video adapter into the

S-video connector on the projector. Use the audio cables as described above.

connect S-video cable and

audio cable and adapter

connect power cable

connect composite video cable and adapter

and audio cable and adapter

12

Displaying a video image

Remove the lens cap.

Press the Power button on the top of the projector.

The LED flashes green. When the lamp comes on, the startup screen is dis-

played and the LED is steady green. It can take a minute for the image to

achieve full brightness.

? No startup screen? Get help on page 15.

Plug in and turn on the video device.

? No video image? Try pressing the Source or Auto Image

button on the keypad. Get help on page 15.

Adjust the height of the projector by pressing the release button to extend

the elevator foot.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen. See page 38 for a table listing screen sizes and distances

to the screen.

remove lens cap

press Power

turn on video device

source

adjust height

release button

adjust distance

13

Adjust the zoom using the tab or the focus using the dial by rotating them

until the desired image size and sharpness are produced.

If the image is not square, adjust the keystone using the buttons on the key-

pad. Press the upper Keystone button to reduce the upper part of the

image, and press the lower Keystone button to reduce the lower part.

Adjust the volume on the keypad.

Adjust the Contrast, Brightness, Color, or Tint in the Picture menu.

See page 27 for help with the menus.

adjust zoom and focus

focus

zoom

adjust keystone

adjust volume

adjust Picture menu

14

Shutting down the projector

By default, the projector automatically displays a blank screen after no

active source is detected for 30 minutes. This blank screen helps preserve

the life of the projector. The image returns when an active source is detected

or a remote or keypad button is pressed.

Screen Save

You can make the blank screen appear after a different time interval using

the Settings>System menu. See page 32. There are six time options, rang-

ing from five minutes to 30 minutes with five minute intervals.

Power Save

The projector also has a Power Save feature that, when activated, automati-

cally turns the lamp off after no signals are detected for 20 minutes. After 10

additional minutes with no signal, the projector powers down. If an active

signal is received before the projector powers down, the image is displayed.

You must press the Power button to display an image after 30 minutes have

passed. When Power Save is enabled, Screen Save is disabled. See page 31.

Turning off the projector

To turn off the projector, press the power button and verify that you want to

turn the projector off by pressing the power button again within 3 seconds.

You can cancel the shutdown by not pressing the power button a second

time. The lamp turns off and the LED blinks green for 1 minute. When the

lamp has cooled, the LED lights green. Unplug the power cable to com-

pletely power off the projector.

Troubleshooting your setup

If your image appears correctly on the screen, skip to the next section

(page 23). If it does not, troubleshoot the setup.

The LED on top of the projector indicates the state of the projector and can

help you troubleshoot.

The following tables show common problems. In some cases, more than one

possible solution is provided. Try the solutions in the order they are pre-

sented. When the problem is solved, you can skip the additional solutions.

Table 1: LED behavior and meaning

LED color/behavior Meaning

solid green The projector is plugged in, or the projec-

tor has been turned on and the software

has initialized or the projector has been

turned off.

blinking green The power button has been pressed and

the software is initializing, or the projec-

tor is powering down.

blinking red

see page 38 for more information

A fan or lamp failure has occurred. Make

sure the vents aren’t blocked (see

page 20).Turn off the projector and wait

one minute, then turn the projector on

again. If the Change Lamp message

appears, replace the lamp and reset the

lamp timer. Contact Technical Support if

the problem persists

.

solid red An unidentifiable error: please contact

Technical Support.

15

Source Troubleshooting

Problem Solution Result

No startup screen Plug power cable in and press the power

button. Remove lens cap.

Correct image

Only startup screen appears Press the Source button

Activate laptop’s external port

Computer image projected

startup

screen

A

startup

screen

or restart

laptop

so

ur

ce

A

16

No computer image, just the words “Signal out of

range”

Adjust computer refresh rate in Control

Panel>Display>Settings>Advanced>

Adapter (location varies by operating

system)

Computer image projected

A

Signal out of

range

You may also need to set a different

resolution on your computer, as shown

on the following page

A

17

Image fuzzy or cropped

Set your computer’s display resolution to

the native resolution of the projector

(Start>Settings>Control

Panel>Display>Settings tab,

select1024x768)

Image clear and not cropped

Remote control not advancing PowerPoint slides

Connect computer cable (page 6), then

load USB drivers, if needed (page 8)

Check batteries in remote

Remote advances slides.

See page 23 for information on the remote

A

AA

For a laptop,

disable laptop

monitor

or turn-on dual-

display mode

A

X

18

Projector troubleshooting

Problem Solution Result

Image not square Adjust keystone on keypad

Square image

Edges of video image distorted

Turn Overscan on in the Picture>Advanced

menu

Correct image

Image not sharp

Adjust Sharpness in the Picture>Advanced

menu

Correct image

AB

ABAB

AB

La pagina sta caricando ...

Proxima ASA DP1200x Manuale utente

Questo manuale è adatto anche per

Proxima ASA DP1200x Manuale utente

in altre lingue

Documenti correlati

Altri documenti