Mellanox Technologies SX6720 Hardware User Manual

Mellanox Technologieswww.mellanox.com

Mellanox SwitchX®-2

1U Switch Systems

Hardware User Manual

Model: SX67X0 and SX6710G

Rev 2.0

Mellanox Technologies

350 Oakmead Parkway Suite 100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox®, Mellanox logo, Accelio®, BridgeX®, CloudX logo, CompustorX®, Connect-IB®, ConnectX®,

CoolBox®, CORE-Direct®, EZchip®, EZchip logo, EZappliance®, EZdesign®, EZdriver®, EZsystem®,

GPUDirect®, InfiniHost®, InfiniBridge®, InfiniScale®, Kotura®, Kotura logo, Mellanox CloudRack® , Mellanox

CloudXMellanox® , Mellanox Federal Systems® , Mellanox HostDirect® , Mellanox Multi-Host® , Mellanox Open

Ethernet®, Mellanox OpenCloud® , Mellanox OpenCloud Logo® , Mellanox PeerDirect® , Mellanox ScalableHPC® ,

Mellanox StorageX® , Mellanox TuneX® , Mellanox Connect Accelerate Outperform logo , Mellanox Virtual Modular

Switch®, MetroDX®, MetroX®, MLNX-OS®, NP-1c®, NP-2®, NP-3®, NPS®, Open Ethernet logo, PhyX®,

PlatformX®, PSIPHY®, SiPhy®, StoreX®, SwitchX®, Tilera®, Tilera logo, TestX®, TuneX®, The Generation of

Open Ethernet logo, UFM®, Unbreakable Link® , Virtual Protocol Interconnect® , Voltaire® and Voltaire logo are

registered trademarks of Mellanox Technologies , Ltd.

All other trademarks are property of their respective owners .

For the most updated list of Mellanox trademarks, visit http://www.mellanox.com/page/trademarks

NOTE:

THIS HARDWARE, SOFTWARE OR TEST SUITE PRODUCT (“PRODUCT (S)”) AND ITS RELATED

DOCUMENTATION ARE PROVIDED BY MELLANOX TECHNOLOGIES “AS-IS” WITH ALL FAULTS OF ANY

KIND AND SOLELY FOR THE PURPOSE OF AIDING THE CUSTOMER IN TESTING APPLICATIONS THAT

USE THE PRODUCTS IN DESIGNATED SOLUTIONS. THE CUSTOMER'S MANUFACTURING TEST

ENVIRONMENT HAS NOT MET THE STANDARDS SET BY MELLANOX TECHNOLOGIES TO FULLY

QUALIFY THE PRODUCT(S) AND/OR THE SYSTEM USING IT. THEREFORE, MELLANOX TECHNOLOGIES

CANNOT AND DOES NOT GUARANTEE OR WARRANT THAT THE PRODUCTS WILL OPERATE WITH THE

HIGHEST QUALITY. ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE TO CUSTOMER OR

ANY THIRD PARTIES FOR ANY DIRECT, INDIRECT, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES OF ANY KIND (INCLUDING , BUT NOT LIMITED TO, PAYMENT FOR PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT , STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY FROM THE USE OF THE

PRODUCT (S) AND RELATED DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Doc #: MLNX-15-4241

2Mellanox Technologies

Rev 1.9 3Mellanox Technologies

Table of Contents

Chapter 1 Introduction to Mellanox SX67X0/SX6710G Systems . . . . . . . . . . 11

1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.2 Speed and Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.3 Management Interfaces, PSUs and Fans . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.5 Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.6 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.2 System Installation and Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.3 Air Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.5 Battery Backup Unit (BBU) Installation for SX6720 . . . . . . . . . . . . . . . . . . 18

2.5.1 Installing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.5.2 Extracting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.6 Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2.6.1 Static Rail Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2.6.2 Telescopic Rail Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.7 Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2.7.1 Breakout Cables and Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2.8 Initial Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2.9 System Bring-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.9.1 Configuring Network Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.10 FRU Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.1 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

2.10.2 Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.1 Supported Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.1.1 Data Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.1.2 Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.1.3 RS232 (Console). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.1.4 Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.1.5 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.1.6 Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.1.7 Status and Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4 Mellanox Technologies

3.2.1 LED Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.3 Inventory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Chapter 4 Software Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.1 InfiniBand Subnet Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.2 Fabric Inspector (Diagnostics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.3 Upgrading Software (on Managed Systems) . . . . . . . . . . . . . . . . . . . . . . . 53

4.3.1 MLNX-OS Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

4.3.2 Switch Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Chapter 5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5.1 Troubleshooting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Chapter 6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6.1 SX67X0/SX6710G Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Rev 1.9 5Mellanox Technologies

List of Tables

Table 1: Revision History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Table 2: References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Table 3: Speed and Switching Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table 4: Management Interfaces, PSUs and Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table 5: Ordering Part Numbers (OPNs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Table 6: Air Flow Color Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Table 7: Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Table 8: Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Table 9: Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Table 10: Serial Terminal Program Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Table 11: Configuration Wizard Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Table 12: Configuration Wizard Session - Static IP Configuration . . . . . . . . . . . . . . . . . . . . . 38

Table 13: LEDs Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Table 14: System Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Table 15: Fan Status Rear LED Assignments (One LED per Fan) . . . . . . . . . . . . . . . . . . . . . . . 47

Table 16: Power Supply Unit Status Front LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . 48

Table 17: Power Supply Unit Status Rear LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . .48

Table 18: Bad Port LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 19: BBU LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 20: Port LEDs in InfiniBand System Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Table 21: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Table 22: SX67X0/SX6710G Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Table 23: OPNs for Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Table 24: QSFP Interface Pins 1-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Table 25: QSFP Interface Pins 24-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

6 Mellanox Technologies

List of Figures

Figure 1: SX67X0/SX6710G Front Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 2: SX67X0/SX6710G Rear Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 3: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet . . . . . . . . . . . . . 16

Figure 4: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet . . . . . . . . . . . . . 16

Figure 5: Unlocking the Latches and Extracting the PSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 6: BBU Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 7: BBU Insertion (Left) and Extraction (Right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Figure 8: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 9: Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 10: Attaching the Rails to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 11: Attaching the Brackets to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 12: Installing the Cage Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Figure 13: Attaching the Brackets to the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Figure 14: Sliding the Blades in the Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Figure 15: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Figure 16: Rails Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Figure 17: Installing the Cage Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Figure 18: Mounting the Outer Rails into the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 19: Attaching the Inner Rails to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 20: Securing the Chassis in the Inner Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 21: Sliding the Switch into the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Figure 22: Pulling the Unit Outwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 23: Locking Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Figure 24: Cable Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Figure 25: Breakout or Fanout Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Figure 26: SX67X0 Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 27: System Status LEDs 5 Minutes After Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Figure 28: Two Power Inlets - Electric Caution Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Figure 29: PS Unit Pulled Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Figure 30: Fan Module Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Figure 31: System Status LEDs - Front and Rear Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 32: Fan Status LED- Front and Rear Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 33: Power Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Figure 34: Rear Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Figure 35: Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Rev 2.0 7Mellanox Technologies

Figure 36: Pull-out Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Figure 37: Rear View of Module With Pin Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Figure 38: RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

8 Mellanox Technologies

Revision History

Table 1 - Revision History Table

Date Revision Description

February 2018 2.0 Added SX6710G

January 2018 1.9 Added Taiwan RoHS table to the “Safety Warnings (Multiple Languages)”.

February 2017 1.8 Updated:

• “Unit Identification LED”

February 2017 1.7 Updated:

• “Data Interfaces”

• “Specifications”

• “RJ45 to DB9 Harness Pinout”

Added:

• “BBU LED Assignments”

October 2015 1.5 • Edited “Installation”

August 2015 1.4 Minor fixes

May 2015 1.3 Added Hebrew safety warnings

Added BBU safety warnings in all languages

April 2015 1.2 Added “Telescopic Rail Kit”

January 2015 1.1 Minor formatting edits

January 2015 1.0 Initial release of the first edition

9Mellanox Technologies

About this Manual

This manual describes the installation and basic use of the Mellanox InfiniBand systems.

Intended Audience

This manual is intended for IT managers and system administrators.

References

Conventions

The following icons are used throughout this document to indicate information that is important

to the user.

Table 2 - References

Document Description

MLNX-OS® User Man-

ual

This document contains information regarding the configuration and man-

agement of the MLNX-OS software. See http://www.mellanox.com/page/

mlnx_os.

This icon makes recommendations to the user.

This icon indicates information that is helpful to the user.

10 Mellanox Technologies

This icon indicates a situation that can potentially cause damage to hardware or

software.

This icon indicates a situation that can potentially cause personal injury.

Introduction to Mellanox SX67X0/SX6710G Systems

Rev 2.0

11Mellanox Technologies

1 Introduction to Mellanox SX67X0/SX6710G Systems

1.1 Overview

The SX67X0/SX6710G systems provide the highest performing fabric solution in a 1U form fac-

tor by delivering up to 4Tb/s of non-blocking bandwidth with 200ns port-to-port latency.

These systems are the industry's most cost-effective building blocks for embedded systems and

storage with a need for low port density systems. Whether looking at price-to-performance or

energy-to-performance, these systems offer superior performance, power and space, reducing

capital and operating expenses and providing the best return-on-investment. The systems are an

ideal choice for smaller departmental or back-end clustering uses with high-performance needs,

such as storage, data base and GPGPU clusters.

Powerful servers combined with high-performance storage and applications that use increasingly

complex computations are causing data bandwidth requirements to spiral upward. As servers are

deployed with next generation processors, High-Performance Computing (HPC) environments

and Enterprise Data Centers (EDC) need every last bit of bandwidth delivered with Mellanox’s

FDR InfiniBand systems.

Built with Mellanox’s sixth generation SwitchX®-2 InfiniBand FDR 56Gb/s system device,

these standalone systems are an ideal choice for top-of-rack leaf connectivity or for building

small to extremely large sized clusters.

These systems enable efficient computing with features such as static routing, adaptive routing,

and advanced congestion management. These features ensure the maximum effective fabric

bandwidth by eliminating congestion.

The managed systems comes with an onboard subnet manager, enabling simple, out-of-the-box

fabric bring-up for up to 2048 nodes. MLNX-OS® software delivers complete chassis manage

-

ment of firmware, power supplies, fans, ports and other interfaces.

Mellanox’s edge systems can also be coupled with Mellanox’s Unified Fabric Manager (UFM®)

software for managing scale-out InfiniBand computing environments. UFM enables data center

operators to efficiently provision, monitor and operate the modern data center fabric. UFM

boosts application performance and ensures that the fabric is up and running at all times.

InfiniBand systems come as internally or externally managed. Internally managed systems come

with a CPU that runs the management software (MLNX-OS®) and management ports which are

used to transfer management traffic into the system. Externally managed systems come without

the CPU and management ports and are managed using firmware tools.

Mellanox's InfiniBand to Ethernet gateway, built with Mellanox's SwitchX®-2 based systems,

provides the most cost-effective, high-performance solution for data center unified connectivity

solutions. Mellanox's gateways enable data centers to operate at up to 56Gb/s network speeds

while seamlessly connecting to 1, 10 and 40GbE networks with low latency (400ns). Existing

LAN infrastructures and management practices can be preserved, easing deployment and provid

-

ing significant return-on-investment.

12 Mellanox Technologies

Figure 1: SX67X0/SX6710G Front Side View

Figure 2: SX67X0/SX6710G Rear Side View

1.2 Speed and Switching

Table 3 describes maximum throughput and interface speed per system model.

*The system can support different interfaces and speed rates using QSFP+

to SFP+ adapters or

hybrid cables. For further information, see

“Breakout Cables and Adapters”.

1.3 Management Interfaces, PSUs and Fans

Table 4 lists the various management interfaces, PSUs and fans per system model.

1.4 Features

For a full feature list, please refer to the system’s product brief. Go to http://www.mellanox.com.

In the main menu, click on Products--> InfiniBand/VPI Switch Sys

tems, and select the desired

product page.

1.5 Certifications

The list of certifications (such as EMC, Safety and others) per system for different regions of the

world is located on the Mellanox website at:

Table 3 - Speed and Switching Capabilities

System Model 10GbE SFP+ Interfaces*

40/56GbE QSFP+

Interfaces*

Max Throughput

SX6710 N/A 36 4.032Tb/s

SX6720* N/A 36 4.032Tb/s

SX6710G N/A 36 4.032Tb/s

Table 4 - Management Interfaces, PSUs and Fans

System Model USB MGT Console PSU Fan

SX6710 Rear Rear (2 ports) Rear Yes Yes

SX6720 Rear Rear (2 ports) Rear Yes Yes

SX6710G Rear Rear (2 ports) Rear Yes Yes

Introduction to Mellanox SX67X0/SX6710G Systems

Rev 2.0

13Mellanox Technologies

http://www.mellanox.com/page/environmental_compliance

1.6 Ordering Information

The following table lists ordering information for the available systems. Please pay attention to

the airflow direction when ordering your system. For more details, see

“Air Flow”.

Table 5 - Ordering Part Numbers (OPNs)

System

Model

OPN Description

SX6710 MSX6710-FB2F2 SwitchX®-2 based FDR InfiniBand 1U Switch, 36 QSFP+ ports, 2

Power Supplies (AC), x86 dual core, short depth, rear to front air-

flow, Rail Kit, RoHS6

MSX6710-FS2F2 SwitchX®-2 based FDR InfiniBand 1U Switch, 36 QSFP+ ports, 2

Pow

er Suppli

es (AC), x86 dual core, standard depth, rear to front air-

flow, Rail Kit, RoHS6

SX6720 MSX6720-FS2F2 SwitchX®-2 based FDR InfiniBand 1U Switch BBU ready,36

Q

SFP+ ports, 2

Power Supplies (AC), x86 dual core, standard depth,

rear to front airflow, Rail Kit, RoHS6

SX6710G MSX6710G-FS2F2

SwitchX®-2 InfiniBand to Ethernet gateway, 36 QSFP+ ports, 2

Power Supplies (AC), x86 dual core, standard depth, C2P airflow,

Rail Kit, RoHS6

SwitchX®-2 InfiniBand to Ethernet gateway, 36 QSFP+ ports, 2

Power Supplies (AC), x86 dual core, standard depth, P2C airflow,

Rail Kit, RoHS6

MSX6710G-FS2R2

14 Mellanox Technologies

2 Installation

2.1 Safety Warnings

Prior to the installation, please review the safety warnings as follows:

• For Nordic Countries Notices, see Section E.1, “Nordic Countries Notices,” on page 65.

• For Safety Warnings in English, see Section E.2, “Installation Safety Warnings

(English),” on page 65.

• For Safety Warnings in Hebrew, see Section E.3, “הנקתהב תוחיטב תוארוה (Hebrew),” on

page 69.

• For Safety Warnings in Chinese, see Section 1 on page 72.

• For Safety Warnings in French, see Section 27, “Taiwan RoHS Declaration,” on page 78.

• For Safety Warnings in German, Section E.6, “Installation Sicherheitshinweise(Ger-

man),” on page 82.

• For Safety Warnings in Spanish, see Section E.7, “Advertencias de seguridad de insta-

lación (Spanish),” on page 86.

• For Safety Warnings in Russian, see Section E.8, “Предупреждения по технике

безопасности при установке (Russian),” on page 90.

• For Safety Warnings in Romanian, see Section E.9, “Avertismente privind siguranţa la

instalare (Romanian),” on page 94.

• For Safety Warnings in Croatian, see Section E.10, “Sigurnosna upozorenja za instali-

ranje (Croatian),” on page 98.

• For Safety Warnings in Italian, see Section E.11, “Avvertenze di sicurezza per

l’installazione (Italian),” on page 102.

• For Safety Warnings in Turkish see Section E.12, “Montaj Güvenlik Uyarıları (Turk-

ish),” on page 106.

Installation

Rev 2.0

15Mellanox Technologies

2.2 System Installation and Initialization

Installation and initialization of the system require attention to the normal mechanical, power,

and thermal precautions for rack-mounted equipment.

 The installation procedure for the system involves the following phases:

1. Follow the safety warnings in Section 2.1.

2. Pay attention to the air flow consideration within the system and rack - refer to “Air Flow” on

page 15.

3. Make sure that none of the package contents is missing or damaged - see “Package Contents”

on page 16.

4. Mount the system into a rack enclosure - see “Mounting Options” on page 20.

5. Power on the system - refer to “Initial Power On” on page 34.

6. Perform system bring-up - see “System Bring-Up” on page 35.

7. [Optional]: FRU replacements are described in Section 2.10 on page 41.

2.3 Air Flow

Mellanox systems are offered with two air flow patterns:

• Power (rear) side inlet to connector side outlet - marked with blue power supplies/fans-

FRUs’ handles, as shown in Figure 3.

• Connector (front) side inlet to power side outlet - marked with red power supplies/fans

FRUs’ handles, as shown in

Figure 4.

The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take

precautions to guarantee proper ventilation in order to maintain good airflow at ambi-

ent temperature.

Unless otherwise specified, Mellanox products are designed to work in an environ-

mentally controlled data center with low levels of gaseous and dust (particulate) con-

tamination.

The operation environment should meet severity level G1 as per ISA 71.04 for gas-

eous contamination and ISO 14644-1 class 8 for cleanliness level

All servers and systems in the same rack should be planned with the same airflow

direction.

All FRU components need to have the same air flow direction. A mismatch in the air

flow will affect the heat dissipation.

16 Mellanox Technologies

Table 6 provides an air flow color legend and respective OPN designation

Figure 3: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet

Figure 4: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet

2.4 Package Contents

Before installing your new system, unpack it and check against the parts list below that all the

parts have been sent. Check the parts for visible damage that may have occurred during shipping.

Table 6 - Air Flow Color Legend

Direction

OPN

Designation

Description

Ending with

“-R”

Connector side inlet to power side outlet.

Red latches are placed on the power inlet

side.

Ending with

“-F”

Power side inlet to connector side outlet.

Blue latches are placed on the power inlet

side.

Installation

Rev 2.0

17Mellanox Technologies

The SX67X0/SX6710G package content is as follows:

• 1 – System

• 1 – Rail kit

• 1 – Power cable for each power supply unit – Type C13-C14

• 1 – Harness DB9 to RJ-45

• 1 – Quick Start Guide

If anything is damaged or missing, contact your sales representative at support@mella-

nox.com.

18 Mellanox Technologies

2.5 Battery Backup Unit (BBU) Installation for SX6720

A new Battery Back-up Unit (BBU) will be approximately 30% charged when you receive it. In

case of a power outage, only a fully charged BBU can supply power of up to 5 minutes to the sys

-

tem.

2.5.1 Installing the Battery

Step 1. Extract the power FRU module from the chassis of the switch by unlocking all latches

Step 2. Insert the BBU into the empty slot in the module by sliding it in and pushing the top end of

it down until it snaps into place, as illustrated in the left image of

Figure 7.

Step 3. Slide the module back into the chassis.

A BBU-compatible system is available by ordering an SX6720 system with an appro-

priate license.

If the BBU is deformed, leaking, corroded or visually damaged, replace it immediately

Do not use a BBU that was not provided by Mellanox Technologies

• The BBU maximum storage temperature is 25°C.

• The WebUI might show a fully charged battery, despite a possible 2-3% deviation.

Nevertheless, it is still safe to discharge the battery for up to 5 minutes.

• A BBU that has not been used for six months or longer past ts printed manufactur-

ing date is unusable.

• A BBU that is older than five years, according to the printed manufacturing date,

has reached its "end of life" state and may not provide enough energy to handle the

platform.

• In case the battery should be replaced, software notifications will appear on a

monthly basis, starting three months before EOL time.

Do not insert the battery unit into the switch during its discharge.

Installation

Rev 2.0

19Mellanox Technologies

2.5.2 Extracting the Battery

Step 1. Extract the power FRU module from the chassis of the switch by unlocking all latches.

Step 2. Press both release buttons simultaneously and lift the battery up to remove it, as illustrated

in the right image of

Figure 7.

Step 3. Slide the module back into the chassis.

Figure 5: Unlocking the Latches and Extracting the PSU

Figure 6: BBU Location

20 Mellanox Technologies

Figure 7: BBU Insertion (Left) and Extraction (Right)

2.6 Mounting Options

By default, the systems are sold with the static rail kit described in Section 2.6.1. For the tele-

scopic rail kit installation instructions, see Section 2.6.2.

2.6.1 Static Rail Kit

The following parts are included in the static rail kit (see Figure 8):

At least two people are required to safely mount the system in the rack.

Table 7 - Installation Kit

Kit OPN Rack Size and Rack Depth Range

MTEF-KIT-A Short (17”-24”) or Standard (24”-34”)

La pagina sta caricando ...

Mellanox Technologies SX6720 Hardware User Manual

Questo manuale è adatto anche per

Mellanox Technologies SX6720 Hardware User Manual

in altre lingue

Documenti correlati

Altri documenti