Mellanox Technologies MSX1024B-2BFS Manuale utente

www.mellanox.com

Mellanox SX10XX/SX1X00 1U Switch Systems

Hardware User Manual

Rev. 1.1

Mellanox Technologies

350 Oakmead Parkway Suite 100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox Technologies, Ltd.

Beit Mellanox

PO Box 586 Yokneam 20692

Israel

www.mellanox.com

Tel: +972 (0)74 723 7200

Fax: +972 (0)4 959 3245

Mellanox®, Mellanox logo, BridgeX®, ConnectX®, Connect-IB®, CoolBox®, CORE-Direct®, InfiniBridge®, InfiniHost®,

InfiniScale®, MetroX®, MLNX-OS®, TestX®, PhyX®, ScalableHPC®, SwitchX®, UFM®, Virtual Protocol Interconnect®

and Voltaire® are registered trademarks of Mellanox Technologies, Ltd.

ExtendX™, FabricIT™, HPC-X™, Mellanox Open Ethernet™, Mellanox PeerDirect ™, Mellanox Virtual Modular

Switch™, MetroDX™, Unbreakable-Link™ are trademarks of Mellanox Technologies, Ltd.

All other trademarks are property of their respective owners.

NOTE:

THIS HARDWARE, SOFTWARE OR TEST SUITE PRODUCT (“PRODUCT(S)”) AND ITS RELATED

DOCUMENTATION ARE PROVIDED BY MELLANOX TECHNOLOGIES “AS-IS” WITH ALL FAULTS OF ANY

KIND AND SOLELY FOR THE PURPOSE OF AIDING THE CUSTOMER IN TESTING APPLICATIONS THAT USE

THE PRODUCTS IN DESIGNATED SOLUTIONS. THE CUSTOMER'S MANUFACTURING TEST ENVIRONMENT

HAS NOT MET THE STANDARDS SET BY MELLANOX TECHNOLOGIES TO FULLY QUALIFY THE

PRODUCTO(S) AND/OR THE SYSTEM USING IT. THEREFORE, MELLANOX TECHNOLOGIES CANNOT AND

DOES NOT GUARANTEE OR WARRANT THAT THE PRODUCTS WILL OPERATE WITH THE HIGHEST

QUALITY. ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT

ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE TO CUSTOMER OR ANY THIRD PARTIES

FOR ANY DIRECT, INDIRECT, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES OF ANY KIND

(INCLUDING, BUT NOT LIMITED TO, PAYMENT FOR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY FROM THE USE OF THE PRODUCT(S) AND RELATED

DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Document Number: MLNX-15-4048

Mellanox Technologies

2

Mellanox Technologies

1

Table of Contents

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Chapter 1 Introduction to Mellanox SX10XX/SX1X00 Systems . . . . . . . . . . . . . . . . . . 5

1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Speed and Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Management Interfaces and FRUs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.4.1 Network Management Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.4.2 Ethernet Features (L2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.4.3 IP Features (L3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5 Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.6 Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 Safety Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2 Air Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.4 Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.4.1 19” Systems Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.4.2 Side-by-Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.4.3 Table Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

2.5 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.6 Cable Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

2.6.1 Using a Breakout Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

2.7 SFP+ Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.8 Initial Power On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2.9 System Bring-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2.9.1 Configuring Network Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2.9.2 Remote Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

2.10 FRU Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2.10.1 Power Supply and Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1 Supported Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.1 Data Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.2 Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.3 RS232 (Console) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.4 Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.1.5 USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.1.6 I2C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.1.7 Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.2.1 LED Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Mellanox Technologies

2

3.3 Inventory Pull-out Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Chapter 4 Software Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.1 Upgrading Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Chapter 5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1 Troubleshooting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.2 SpecificationsSX1012 Series. . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . 54

5.3 SX1016 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Chapter 6 SX1024 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6.1 SX1400 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.2 SX1036 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

6.3 SX1700 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix A Accessory and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix B Thermal Threshold Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix C Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

C.1 QSFP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

C.2 SFP+ Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

C.3 RJ-45 CONSOLE and I2C Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

C.4 RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Appendix D Disassembly and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

D.1 Disassembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

D.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Appendix E Safety Warnings (Multiple Languages) . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

E.1 Nordic Countries Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

E.2 Installation Safety Warnings (English)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

E.3 安裝安全性警告 (Chinese) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

E.4 Avertissements de sécurité pour l'installation (French) . . . . . . . . . . . . . . . . . 77

E.5 Installation Sicherheitshinweise(German)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 80

E.6 Advertencias de seguridad de instalación (Spanish) . . . . . . . . . . . . . . . . . . . 83

E.7 Предупреждения по технике безопасности при устано

вке

(Russian) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

E.8 Avertismente privind siguranţa la instalare (Romanian)

. . . . . . . . . . . . . . . . 90

E.9 Sigurnosna upozorenja za instaliranje (Croatian)

. . . . . . . . . . . . . . . . . . . . . . 94

E.10 Avvertenze di sicurezza per l’installazione (italiano) . . . . . . . . . . . . . . . . . . 97

E.11 Montaj Güvenlik Uyarıları (Türkçe)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Mellanox Technologies

1

List of Figures

Figure 1: Ethernet Systems Family Front Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Figure 2: Air Flow Direction Marking - Connector Side

Inlet to Power Side Outlet . . . . . . . . . . .12

Figure 3: Air Flow Direction Marking - Power Side I

nlet to Connector Side Outlet . . . . . . . . . . .12

Figure 4: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Figure 5: Screwing on the Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Figure 6: Inserting the Caged Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Figure 7: Slide the Rail into the Rail Slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Figure 8: Installing the Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

7

Figure 9: System Placement in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Figure 10: Installation Completed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Figure 11: Installation Kit Parts for a Side by Side

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Figure 12: Screw on the System Mounted Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Figure 13: Two Systems Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Figure 14: Placement of Frame in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Figure 15: Placing the Spacer in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Figure 16: Insert System into Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Figure 17: Placing the Bumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Figure 18: Cable Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

6

Figure 19: Breakout or Fanout Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Figure 20: SX1024/SX1400 Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Figure 21: SX1036 Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Figure 22: Examples of Port Mapping Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Figure 23: SX1700 Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Figure 24: SFP+ Removal and Insertion Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Figure 25: System Status LEDs 5 Minutes After Power

On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 26: Two Power Inlets - Electric Caution Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 27: Power Supply Unit Extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Figure 28: PS Unit Pulled Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Figure 29: Fan Module Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Figure 30: System Status LEDs - Front and Rear sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Figure 31: Fan Status LED - Front and Rear sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Figure 32: Power Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Figure 33: Rear Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

6

Figure 34: SFP+ Port LED Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Figure 35: Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

Figure 36: Pull-out Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Mellanox Technologies

2

Figure 37: QSFP Connector Male and Female Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Figure 38: Rear View of Module With Pin Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Figure 39: RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Mellanox Technologies

1

List of Tables

Table 1: Revision History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table 2: References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .3

Table 3: Speed and Switching Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Table 4: Management Interfaces and FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Table 5: Ordering Part Numbers (OPNs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Table 6: Air Flow Label Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Table 7: Installation Kit Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Table 8: Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Table 9: Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Table 10: Serial Terminal Program Configuration . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .34

Table 11: Configuration Wizard Session - DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Table 12: Configuration Wizard Session - Static IP Configuration . . . . . . . . . . . . . . . . . . . . . . . . .36

Table 13: Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Table 14: System Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Table 15: Fan Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Table 16: Power Supply Unit Status LED Assignments . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .47

Table 17: Bad Port LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Table 18: Port LEDs in Ethernet System Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Table 19: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1

Table 20: SX1012 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Table 21: SX1016 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Table 22: SX1024 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Table 23: SX1400 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Table 24: SX1036 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Table 25: SX1700 Specifications . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Table 26: OPNs for Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Table 27: RJ-45 CONSOLE Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Table 28: RJ-45 I2C Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Mellanox Technologies

2

Revision History

Table 1 - Revision History Table

Date Revision Description

January 2015 1.1 Minor formatting edits

January 2015 1.0 First release of the new edition

Mellanox Technologies

3

About this Manual

This manual describes the installation and basic use of the Mellanox Ethernet systems.

Intended Audience

This manual is intended for IT managers and system administrators.

References

Table 2 - References

Document Description

SwitchX® Switch System

Hardware Release Notes

For possible hardware issues see the switch support product page. This

document can be found on the support web page for this product.

MLNX-OS® User Manual This document contains information regardin

g configuring and manag-

ing MLNX-OS software- see http://www.mellanox.com/page/mlnx_os.

Mellanox Technologies

4

Conventions

The following icons are used throughout this document to indicate information that is important

to the user.

This icon makes recommendations to the user.

This icon indicates information that is helpful to the user.

This icon indicates a situation that can potentially cause personal injury or damage to

hardware or software.

Risk of electrick shock!

Mellanox Technologies

5

1 Introduction to Mellanox SX10XX/SX1X00 Systems

1.1 Overview

Mellanox Ethernet System Family delivers the highest performance and port density with a com-

plete chassis and fabric management solution enabling

converged data centers to operate at any

scale while reducing operational costs and infrastructure complexity. This family includes a

broad portfolio of Top-of-Rack (TOR) systems that range from 12 to 64 ports, and support 10/40/

56Gb/s per port. These systems allow IT managers to build cost-effective and scalable system

fabrics for small to large clusters up to 10's-of-thousands of nodes.

Mellanox makes fabric management as easy as it can by providing t

he lowest latency and highest

bandwidth. This allows IT managers to deal with serving the company's business needs, while

solving typical networking issues such as congestion and the inefficiencies generated by adding

unnecessary rules and limitations when the network resources are sufficient.

Figure 1: Ethernet Systems Family Front Side View

1.2 Speed and Switching

Table 3 describes maximum throughput and interface speed per system model.

*The switches can support 10Gb/s interfaces using QSFP to SFP adapters

Table 3 - Speed and Switching Capabilities

System Model

10GbE* SFP+

Interfaces

40/56GbE QSFP+ Interfaces Throughput

SX1012 N/A 12 1.34Tb/s

SX1016 64 N/A 1.28Tb/s

SX1024 48 12 1.92Tb/s

SX1036 N/A 36 4.03Tb/s

SX1400 48 12 1.92Tb/s

SX1700 N/A 36 4.03Tb/s

Introduction to Mellanox SX10XX/SX1X00 Systems

Mellanox Technologies

6

1.3 Management Interfaces and FRUs

Table 4 lists the various management interfaces and available replacement parts per system

model.

Table 4 - Management Interfaces and FRUs

System

Model

USB

MGT

Ports

Qty.

MGT

Ports

Location

I

2

C

Console

Replaceable

PSU

Replaceable

Fan

SX1012 Front

(mini-USB)

1 Front Rear Front N/A N/A

SX1016 Front

(mini-USB)

1 Front N/A Front N/A N/A

SX1024 Rear 2 Front

Rear

Rear Front 2 FRUs 2 FRUs

SX1036 Front 2 Front (x2) Rear Front 2 FRUs 1 FRU

SX1400 Rear 2 Front

Rear

Rear Front 2 FRUs 2 FRUs

SX1700 Rear 2 Front

Rear

Rear Front 2 FRUs 2 FRUs

Mellanox Technologies

7

1.4 Features

1.4.1 Network Management Features

1.4.2 Ethernet Features (L2)

1.4.3 IP Features (L3)

•Static Routes

• OSPF

•ECMP

• VLAN interface for routing

• DHCP Relay

• 100/1000 MbE Management port

• In-Band Management

• Serial Console Port

•OpenFlow

• Embedded puppet

Agent

• RADIUS

•TACACS+

• LDAP

•SSHv2

• DHCP/Zeroconf

• Industry Standard CLI

• Management over IPv4/IPv6

•Telnet

• File download via SCP, FTP & TFTP client

•Dual SW Image

• Network Time Protocol (NTP)

•Syslog

• Auto Temperature Control

• System alarms

• Port Counters

• Event notification

• SNMP v1,v2,v3

•E-Mail

•WebUI

• Predefined scheduled scripts

• System health monitoring

• Mac Table

• 48K L2 FDB entries

•Static MAC

• Jumbo Frames (9216 bytes)

• VLAN 802.1Q (4K)

• Spanning Tree

• RSTP (802.1W)

• MSTP (802.1S)

• Link Aggregation/LACP (802.3ad)

•Flow Control

• Global flow control (802.3a)

• Priority based Flow Control (802.1Qbb)

• DCBx

• Enhanced Transmission Selection (802.1Qaz)

• LLDP (802.1ab)

• IGMP Snooping V1, V2

• Access Control List (L2-L4)

•sFlow

• Port Mirroring

•MLAG

Introduction to Mellanox SX10XX/SX1X00 Systems

Mellanox Technologies

8

•BGP

1.5 Certifications

The list of certifications (such as EMC, Safety and others) per system for different regions of the

world is located on the Mellanox website at:

http://www.mellanox.co

m/page/environmental_compliance

1.6 Ordering Information

the following table lists ordering information for the available systems. Please pay attention to

the airflow direction when ordering your system. For more details, see “Air Flow” on page 11._

Table 5 - Ordering Part Numbers (OPNs)

System

Model

OPN Description

SX1012 MSX1012B-1BFS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 12 QSFP+

ports, 1 Power Supply (AC), short depth, PPC460, P2C airflow, Rail Kit must be

purchased separately, RoHS6

MSX1012B-2BFS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 12 QSFP+

po

rts, 2 Power Supplies (AC), short depth, PPC460, P2C airflow, Rail Kit must be

purchased separately, RoHS6

MSX1012B-2BRS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 12 QSFP+

po

rts, 2 Power Supplies (AC), short depth, PPC460, C2P airflow, Rail Kit must be

purchased separately, RoHS6

SX1016 MSX1016X-2BFR SwitchX® based 64-port SFP+ 10GbE, 1U Ether

net switch. 2PS, Short depth, PSU

side to Connector side airflow, Rail kit and ROHS6

MSX1016X-2BFS SwitchX®-2 based 10GbE, 1U Open Ethernet Switch with MLNX-OS, 64 SFP+

po

rts, 2 Power Supplies (AC), Short depth, PPC460, P2C airflow, Rail kit, RoHS6

MSX1016X-2BRR SwitchX® based 64-port SFP+ 10GbE. 1U Ether

net switch. 2PS, Short depth, Con-

nector side to PSU side airflow, Rail kit and ROHS6

MSX1016X-2BRS SwitchX®-2 based 10GbE, 1U Open Ethernet Switch with MLNX-OS, 64 SFP+

po

rts, 2 Power Supplies (AC), Short depth, PPC460, C2P airflow, Rail kit, RoHS6

SX1024 MSX1024B-1BFS SwitchX®-2 based10GbE/40GbE, 1U Open E

thernet Switch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 1 Power Supply (AC), PPC460, short depth, P2C air-

flow, Rail kit, RoHS6

MSX1024B-1BRS SwitchX®-2 based10GbE/40GbE, 1U Open E

thernet Switch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 1 Power Supply (AC), PPC460, short depth, C2P air-

flow, Rail kit, RoHS6

MSX1024B-2BFS SwitchX®-2 based10GbE/40GbE, 1U Open E

thernet Switch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 2 Power Supplies (AC), PPC460, short depth, P2C air-

flow, Rail kit, RoHS6

MSX1024B-2BRS SwitchX®-2 based10GbE/40GbE, 1U Open E

thernet Switch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 2 Power Supplies (AC), PPC460, short depth, C2P air-

flow, Rail kit, RoHS6

Mellanox Technologies

9

SX1400 MSX1400-BS2F2 SwitchX®-2 based 10GbE/40GbE, 1U Open Ethernet Switch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 2 Power Supplies (AC), x86 quad core, standard depth,

P2C airflow, Rail kit, RoHS6

MSX1400-BS2R2 SwitchX®-2 based 10GbE/40GbE, 1U Open Ethernet S

witch with MLNX-OS, 48

SFP+ ports, 12 QSFP+ ports, 2 Power Supplies (AC), x86 quad core, standard depth,

C2P airflow, Rail kit, RoHS6

SX1036 MSX1036B-1BRR SwitchX® based 36-port QSFP 40GbE 1U Ethernet Switch, 36 QSFP ports, 1 PS,

Sho

rt depth, Connector side to PSU side airflow, Rail Kit and RoHS6

MSX1036B-1BRS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

po

rts, 1 Power Supply (AC), PPC460, short depth, C2P airflow, Rail Kit, RoHS6

MSX1036B-1SFR SwitchX® based 36-port QSFP 40GbE 1U Ethernet Switch, 36 QSFP ports, 1 PS,

S

tandard depth, PSU side to Connector side airflow, Rail Kit and RoHS6

MSX1036B-1SFS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

po

rts, 1 Power Supply (AC), PPC460, standard depth, P2C airflow, Rail Kit, RoHS6

MSX1036B-2BRS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

por

ts, 2 Power Supplies (AC), PPC460, short depth, C2P airflow, Rail Kit, RoHS6

MSX1036B-2SFS SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

por

ts, 2 Power Supplies (AC), PPC460, standard depth, P2C airflow, Rail Kit,

RoHS6

SX1700 MSX1700-BS1F2 SwitchX®-2 based 36-port QSFP 40GbE 1U Ethernet Switch, 36 QSFP ports, 1 PS,

S

tandard depth, PSU side to Connector side airflow, x86 CPU, Rail kit and ROHS6

MSX1700-BS2F2 SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

po

rts, 2 Power Supplies (AC), x86 quad core, standard depth, P2C airflow, Rail kit,

RoHS6

MSX1700-BS2R2 SwitchX®-2 based 40GbE, 1U Open Ethernet Switch with MLNX-OS, 36 QSFP+

po

rts, 2 Power Supplies (AC), x86 quad core, standard depth, C2P airflow, Rail kit,

RoHS6

Table 5 - Ordering Part Numbers (OPNs)

System

Model

OPN Description

Installation

Mellanox Technologies

10

2Installation

Installation and initialization of the system require attention to the normal mechanical, power,

and thermal precautions for rack-mounted equipment.

 The installation procedure for the Metrox sys

tem involves the following phases:

1. Follow the safety warnings in Section 2.1.

2. Pay attention to the air flow consideration within the

system and rack - refer to “Air Flow” on

page 11.

3. Make sure that none of the package contents is missing or damaged - see “Package Contents”

on page 13

4. Mount the system to the rack - see “Mounting Options” on page 14.

5. Ground the system, refer to “Grounding” on page 25.

6. Connect the WDFM

7. Power on the system - refer to “Initial Power On” on page 32

8. Perform system bring-up - see “System Bring-Up” on page 34

FRU replacements are described in Section 2.10 on page 38.

2.1 Safety Warnings

Prior to the installation, please review the safety warnings as follows:

For Safety Warnings in English see Section E.1, “Nordic Countries Notices,” on page 69.

For Safety Warnings in Chinese see Section E.3 on page 72.

For Safety Warnings in French see Section E.4, “Avertissements de sécurit

é pour l'installation

(French),” on page 77.

For Safety Warnings in German Section E.5, “Installation Sicherheitshinweise(German),” on

page 80.

For Safety Warnings in Spanish see Section E.6, “Advertencias de seguridad de instalación

(Spanish),” on page 83.

For Safety Warnings in Russian see Section E.7, “Пре

дупреждения по технике безопасности

при уст

ановке (Russian),” on page 87.

For Safety Warnings in Romanian see Section E.8, “Avertismente privind siguranţa la insta

lare

(Romanian),” on page 90.

For Safety Warnings in Croatian see Section E.9, “Sigurnosna upozorenja za

instaliranje (Croa-

tian),” on page 94.

For Safety Warnings in Italian see Section E.10, “Avvertenze di sicurezz

a per l’installazione

(italiano),” on page 97.

The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take

precautions to guarantee proper ventilation in order to maintain good airflow at ambi-

ent temperature.

Mellanox Technologies

11

For Safety Warnings in Turkish see Section E.11, “Montaj Güvenlik Uyarıları (Türkçe),” on

page 102.

2.2 Air Flow

Mellanox systems are offered with two air flow patterns:

• Connector (front) side inlet to power side outlet -

marked with red labels on the power

supply side as shown in Figure 2.

• Power (rear) side inlet to connector side outlet

- marked with blue labels on the power

supply side as shown in Figure 3.

Table 6 provides an air flow label color legend and respective

OPN designations,

All servers and systems in the same rack should be planned with the same air-

flow direction.

All FRU components need to have the same air flow direction. A mismatch in

the air flow will affect the heat dissipation.

Table 6 - Air Flow Label Legend

Direction

Label OPN

Designation

Description

R Connector side inlet to

power side outlet. Red

labels are placed on the

power inlet side.

Installation

Mellanox Technologies

12

Figure 2: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet

Figure 3: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet

F Power side inlet to connec-

tor side outlet. Blue labels

are

placed on the power

inlet side.

Table 6 - Air Flow Label Legend

Direction

Label OPN

Designation

Description

OK

!

OK

!

OK

I2C

OK

!

OK

!

OK

I2C

Mellanox Technologies

13

2.3 Package Contents

Before installing your new system, unpack the system, and check, against the parts list below,

that all the parts have been sent. Check the parts for visible damage that may have occurred dur-

ing shipping.

The system package content is as follows:

• 1 – System

• 1 – Rail kit (not applicable for half-width systems)

• 1 – Power cable for each power supply unit – Type C13-C14

• 1 – Harness: HAR000028 – Harness RS232 2M ca

ble – DB9 to RJ-45

• 1 – Quick Start Guide

The rear view shown in the above figures does not apply to SX1012, SX1016 and

SX1024.

If anything is damaged or missing, contact your sales representative at support@mella-

nox.com.

Installation

Mellanox Technologies

14

2.4 Mounting Options

2.4.1 19” Systems Mounting

This section is applicable for 19” systems.

There are two installation kit options: standard and short.

Standard depth systems should be

mounted using the standard rail kit; short systems can be mounted using either of the rail kits.

The following parts are included in the rail

kit rack (see Figure 4):

• Two rails

• Two rail slides

• Two system slides

• 16 recessed flat head screws (with extras)

• 10 caged nuts

• 10 pan head screws (M6)

Figure 4: Rack Rail Kit Parts

Table 7 - Installation Kit Options

Kit OPN Rack Size

MSX60-BKIT 40-60 cm deep (Short)

MSX60-SKIT 60-80 cm deep (Standard)

System slide x2

Rail x2

Rail slide x2

Nuts and bolts

Screws

La pagina sta caricando ...

Mellanox Technologies MSX1024B-2BFS Manuale utente

Questo manuale è adatto anche per

Mellanox Technologies MSX1024B-2BFS Manuale utente

in altre lingue

Documenti correlati

Altri documenti