Tyan Transport TN27 B4987 Manuale utente

Transport TN27

B4987

Service Engineer’s Manual

PREFACE

Copyright

This publication, including all photographs, illustrations, and software,

Neither this manual, nor any material contained herein, may be

reproduced without written consent of manufacturer.

Version 1.00

Disclaimer

Information contained in this document is furnished by TYAN

Computer Corporation and has been reviewed for accuracy and

reliability prior to printing. TYAN assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or use

of TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any direct

or indirect, incidental or consequential damage, loss of use, loss of

data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport TN27 B4987 are trademarks of TYAN Computer

Corporation.

AMD, Opteron, Athlon, and combinations thereof are trademarks of

AMD Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

InfiniBand is a trademark of Mellanox Technologies.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe

Corporation.

i

Federal Communication Commission (FCC)

Notice for the USA Compliance Information

Statement (Declaration of Conformity

Procedure) DoC FCC Part 15: This device

complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class A limits for radio

interference as specified in the Canadian Department of

Communications Radio Interference Regulations. (Cet appareil est

conforme aux norms de Classe A d’interference radio tel que

specifie par le Ministere Canadien des Communications dans les

reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of

explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by manufacturer. Dispose

of used battery according to manufacturer instructions and in

accordance with your local regulations.

ii

About this Manual

This manual provides you with instructions on installing your

Transport™TN27-B4987. This Manual is intended for

experienced users and integrators with hardware knowledge

of personal computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the TN27 B4987

barebones, standard parts list, describes the

external components, gives a table of key

components, and provides block diagrams of

the system.

Chapter2:

Covers procedures on installing the CPU,

memory modules, PCI-E card，HTX card and

hard drives.

Chapter3:

Covers removal and replacement

procedures for pre-installed components.

Appendix I:

Describes the differences between

motherboard BIOS and system BIOS.

Appendix II:

Covers procedures on installing the OPMA

card (M3295

-2) into the SO-DIMM socket.

Appendix III:

Listing the cable connection tables for

reference of system setup.

Appendix IV:

Provides brief description on how to

configure and use the components of LSI

Logic IR software product with LSI Logic

SAS controller.

Appendix V:

Provides brief description on how to install

InfiniBand Driver.

iii

SAFETY INFORMATION

Before installing and using the Transport™TN27-B4987, take note

of the following precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

–

Do not block the slots and opening on the unit, which are

provided for ventilation.

–

Only use the power source indicated on the marking label. If

you are not sure, contact the power company.

–

The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If you outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

–

Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–

Follow all warnings and cautions in this manual and on the

unit case.

–

Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

–

When replacing parts, ensure that you use parts specified

by the manufacturer.

–

When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

–

Avoid using the system near water, in direct sunlight, or near

a heating device.

–

Cover the unit when not in use.

iv

Table of Contents

Chapter 1: Overview

1.1 About the Transport TN27 B4987…………………….……...…….…

1

1.2 Product Models…………………..……………………….……….......

2

1.3 Features………………………………………………………………..

3

1.4 Standard Parts List……………………...….……..………...................

5

1.4.1 Box Contents……………………...…………………………………… 5

1.4.2 Accessories…………………………………………………………….. 7

1.5 Optional Parts…..……….………………………..…….......................

9

1.6 About the Product……….………………………..…….......................

10

1.6.1 System Front View…………………………..………………………… 10

1.6.2 System Rear View…………………………………............................... 11

1.6.3 LED Definitions………………………………………………………... 12

1.6.4 Motherboard Layout…………………………........................................ 14

1.6.5 Jumpers & Connectors……………………………………..................... 15

1.6.6 System Block Diagram…….................................................................... 22

1.6.7 Internal View………...…….................................................................... 23

Chapter 2: Setting Up

2.0.1 Before You Begin………..………………………….............................. 24

2.0.2 Work Area……………………………………………………............... 24

2.0.3 Tools …………….…………………….................................................. 24

2.0.4 Precautions ………………………………………………….................. 25

2.1 Installing Motherboard Components...………………..………............

26

2.1.1 Removing the Chassis Cover…………………………………............... 26

2.1.2 Installing the CPU and Heatsink……………………………………….. 27

2.1.3 Installing the Memory……………..…………………………………… 30

2.1.4 Installing the PCI -E Card / HTX Card.................................................. 32

2.1.5 Installing the Hard Drive………………………………………………. 35

2.2 Rack Mounting…………………..........................................................

37

2.2.1 Installing the Server in a Rack………………......................................... 37

Chapter 3: Replacing Pre-Installed Components

3.1 Introduction……………………………………………………………

42

3.1.1 Work Area……………………………………………………............... 42

3.1.2 Tools…………………………………………….………....................... 42

3.1.3 Precautions……………………………………………………............... 43

3.2 Disassembly Flowchart…………………………..……………………

44

3.3 Removing the Cover……………………………..…….……………...

45

3.4 Replacing Motherboard Components……………..…………………..

46

3.4.1 Disconnecting All Motherboard Cables…………………...................... 46

3.4.2 Removing the Motherboard……………………………………………. 48

3.5 Replacing the Slim ODD……..………………….................................

49

v

3.6 Replacing the M1003 LED Control Board…………………………...

51

3.6.1 M1003 LED Control Board Features………………………….............. 53

3.6.2 M1003 LED Control Board Connector Pin Definition………………… 54

3.7 Replacing the System Fan……………………...………..……............

55

3.8 Replacing the M1022 Fan Board……………………………………..

57

3.8.1 M1022 Fan Board Features……………………………………….…… 59

3.8.2 M1022 Fan Board Connector Pin Definition…………………………... 60

3.9 Replacing the M1223 HDD Backplane……..……...............................

61

3.9.1 M1223 HDD backplane Features for TN27- B4987……....................... 62

3.9.2 M1223 HDD backplane Connector Pin Definition..……………...…… 64

3.10 Replacing the Power Supply….…………..........................................

65

3.11 Replacing the M1025 Power Board Module.......................................

66

3.11.1 M1025 PDB Module Features……….………………………………… 67

3.11.2 M1025 PDB Module PWR connector Pin Definition…………….…… 68

Chapter 4: BIOS Setup

4.1 About the BIOS…………………………………………………...…..

67

4.2 BIOS Menu Bar…………………………………………………...…..

67

4.3 Setup Basics…..…………………………………………………...…..

68

4.4 Getting Help…..…………………………………..……………….…..

68

4.5 In Case of Problems……………………………………………...……

68

4.6 BIOS Main Menu……………………………………………………..

69

4.7 BIOS Advanced Menu……………………………………………..….

70

4.7.1 CPU Configuration…….………………………………………………. 71

4.7.2 IDE Configuration Sub-Menu…………………………………………. 72

4.7.3 Super I/O Configuration Sub-Menu…………………………………… 77

4.7.4 ACPI Configuration Sub-Menu………………………………………... 78

4.7.5 APM Configuration……………………………………………………. 81

4.7.6 Event Log Configuration Sub-Menu…………………………………... 83

4.7.7 Hardware Health Configuration Sub-Menu……………………………. 84

4.7.8 Remote Access Configuration Sub-Menu……………………………... 87

4.7.9 USB Configuration Sub-Menu………………………………………… 88

4.8 PCI PnP Menu………………………………………………………...

90

4.9 Boot Menu…………………………………………………………….

92

4.9.1 Boot Settings Configuration Sub-Menu……………….………………. 92

4.9.2 Boot Device Priority………………..………………………….............. 94

4.9.3 Hard Disk Drives……………...……………………………….............. 95

4.9.4 Removable Drives…………..…………………………………………. 96

4.9.5 Network Drives..……………………………………………………….. 96

4.10 Security Menu………………………………………………………..

97

4.11 Chipset Menu………………………………………………………...

98

4.11.1 Northbridge Configuration Sub-Menu………………………………… 99

4.11.2 Southbridge Configuration Sub-Menu………………………………… 106

4.11.3 Hyper Transport MCP55 Configuration Sub-Menu…………………… 107

4.12 Exit Menu……………………………………………………………

108

vi

Appendix I: Installing OPMA Card (M3295-2)

Appendix II: Cable Connection Table

Appendix III: LSI Logic Config Utility

Appendix IV: Installing InfiniBand Driver

Appendix V: FRU Parts Table

vii

1

Chapter 1: Overview

1.1 About the Transport™ TN27 B4987

Congratulations on your purchase of the TYAN Transport™

TN27 B4987, a highly-optimized rack-mountable barebone

system. The Transport™ TN27 B

4987 is designed to support

quad AMD® Opteron™ 8000 series dual-core and

Quad-core 1207-pin processors and up to 32DIMMs

, providing

a rich feature set and incredible performance. Leveraging

advanced technology from AMD, the Transport™ TN27 B4987

server system is capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and lightning-fast

PCI-E bus and HTX slot implementation. The Transport™ TN27

B4987 not only empowers your company in today’s demanding

IT environment but also offers a smooth path for future

application usage.

TYAN is also proud to deliver the Transport™ TN27 B4987 in

SAS flavor while supporting up to four (4) hot-swap hard drives

and one (1) slim ODD. The Transport™ TN27 B4987 uses

TYAN’s latest chassis featuring a robust structure and a solid

mechanical enclosure. All of this provides the Transport™ TN27

B4987 the power and flexibility to meet the needs of nearly any

server application.

1

Chapter 1: Overview

2

1.2 Product Models

Model HDD Bays

With IB

Onboard

Power

supply

B4987T27W4HR-E SAS(4), Hot-swappable No

1000W (1+1)

Redundant

B4987T27W4HRI-E SAS(4), Hot-swappable Yes

1000W (1+1)

Redundant

Chapter 1: Overview

2

3

1.3 Features

Enclosure

• 2U rack-mountable chassis

¾ (1) slim ODD bay

¾ (4) 3.5” HDD bays

• Dimension:

D29.9 x W 16.9 x H3.4 inch

(760 x 430 x 86mm)

Processors

• Quad mPGA1207-pin Socket

• Supports up to Quad AMD®

Opteron™ Socket F (1207) 8000

series dual-core and Quad-core

1207-pin processors

• Up to

1.0GHz Hyper-Transport link

support

• AMD Dual Dynamic Power (Split

Power Plane) support

Chipset

• nVidia NPF3600 (MCP55)

• Winbond 83627EHG super I/O

controller

• Winbond 83793G Hardware

Monitoring IC

• LSI 1068E 8-port SAS controller

• Mellanox InfiniHost

MT25204A0-FCC-D (DDR)

(Optional)

Memory

• Total 32 DDRII sockets (8 per CPU)

• Maximum 128GB Registered

DDR2-400/533 memory, DDR2-667

supported

(< 2 in one channel, When install

more than 2 DIMMs (not included) on

one channel, the frequency will

decelerate to 533MHz.)

• Supports ECC Memory and Chipkill

Expansion Slots

• (2) PCI-E x 16 slot w/ x8 link (support

one low profile PCI-E card and one

Back I/O Ports

• Stacked PS/2 Mouse & Keyboard

ports

• (1) COM connector

• (1) 15-pin VGA port

• (2) USB2.0 ports

• (3) RJ-45 ports, one for OPMA

management

• (1) 8487 SAS connector (same as IB

CON)

• (1) InfiniBand connector (optional)

Front Panel Features

• I/O

– (2) USB2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LEDs

– System warning LED

– ID LED

• Switches

– Power

– Reset

– NMI

– ID

Integrated Storage Controller

• B4987T27W4HR-E

– Support 4port SAS, by LSI1068E

SAS controller

• B4987 T27W4HRI-E

– Support 4port SAS, by LSI1068E

SAS controller and IB chip

MT25204A0-FCCR-D (DDR) on

board

Storage

• Hard Disk Drives:

– B4987T27W4HR-E/

B4987T27W4HRI-E: Support 4SAS

HDD with RAID 0,1,1E

– Pre-installed slim type ODD

3

Chapter 1: Overview

4

standard PCI-E card) and (1) HTX

slot (by riser card M4987-2U)

• 200-pin OPMA connector support M3

OPMA card

Networking

• Dual Gigabit Ethernet ports

(Marvell88E1121 Gigabit PHY)

• Supports WOL and PXE

Networking

• Integrated ATI ES1000 (RN50)

w/32MB frame buffer

Motherboard

• TYAN S4987-E system board

• Customized 16.83” x 16.098”

BIOS

• AMI 8Mbit LPC Flash ROM

• Supports APM1.2 and ACPI

• Serial console redirect

• USB boot supported

Sever Management

• System fan speed control and

monitoring

• Supports Tyan Server Management

(TSM)

• Watch Dog Timer supported

• Support TYAN M3295-2 OPMA Card

System Cooling

• (8) 60*60*38mm hot-swappable

system FANs by M1022

hot-swappable FAN BD

• (4) passive CPU heatsinks

Power Supply

• Redundant 1000W (1+1) PWR

Regulatory

• FCC Class A (Declaration of

Conformity)

• CE (Declaration of Conformity)

• VCCI

• C-Tick

Environment Temperature

• Operating temperature: 5°C ~ 35°C

• Non-operating temperature: -40°C

~ 70°C

Chapter 1: Overview

4

5

1.4 Standard Parts List

This section describes the Transport TN27 B4987 package contents

and accessories. Open the box carefully and ensure that all

components are present and undamaged. The product should arrive

packaged as illustrated below.

1.4.1 Box Contents

Component Description

2U chassis, (4) hot-swap HDD bays

Tyan S4987-E system board

(pre-installed)

Air Duct

1 x slim ODD drive (pre-installed)

M1003：

LED control board (pre-installed)

5

Chapter 1: Overview

6

Component Description

Redundant 1000W (1+1) Power

M1025 PDB Module

(8) System fans

(60mm x 60mm x 38mm)

M1223 HDD Backplane

M1022 Fan BD

M4987-2U PCI-E/HTX Riser

Chapter 1: Overview

6

7

1.4.2 Accessories

If any items are missing or appear damaged, contract your retailer or

browse to TYAN’s website for service：

http://www.tyan

.com

The Web site also provides information on other TYAN products,

plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan Barebone Drive CD 4 x Heatsink

HDD Screws

Power Cables

Left to right: Europe, US

Mounting Ears & Screws

Barebone Manual &

Mainboard manual

7

Chapter 1: Overview

8

Rail Kit

Rail with Bracket x 2 Screw Sack

Chapter 1: Overview

8

9

1.5 Optional Parts

Item Model Number Picture Quantity Description

1 M3295-2

1

SMDC CARD,OPMA

INTERFACE

9

Chapter 1: Overview

10

1.6 About the Product

The following views show you the product.

1.6.1 System Front View

Redundant

Power Supply

ODD Drive

Hard Drive Bay x 4

USB Ports

Power Switch

ID LED

2 x LAN LEDs

ID Switch

NMI Switch

Reset Switch

Power LED

HDD Activity LED

Warning LED

Chapter 1: Overview

10

11

1.6.2 System Rear View

NOTE: IB CON and IB LEDs only appear on B4987T27W4HRI-E

Model.

AC Inlet

PS/2 Mouse/Keyboard Ports

PCI-E Slot

Serial Port

VGA Port

LAN Port x 2

USB Ports

External

SAS CON

ID LED

SAS LED

IB Active LED

IB Power

LED

Management

Port for OPMA

ID SW

11

Chapter 1: Overview

La pagina sta caricando ...

Tyan Transport TN27 B4987 Manuale utente

Tyan Transport TN27 B4987 Manuale utente

in altre lingue

Documenti correlati

Altri documenti