Philips AC1215/10 Manuale utente

AC1215

EN User manual 1

DA Brugervejledning 17

DE Benutzerhandbuch 33

ES Manual del usuario 51

FI Käyttöopas 68

FR Mode d’emploi 85

IT Manuale utente 102

NL Gebruiksaanwijzing 120

NO Brukerhåndbok 137

PT Manual do utilizador 153

SV Användarhandbok 170

4241 210 93083

1 2

J K L M N

E

F

G

H

I

A

B

D

C

3s

Contents

1 Important 2

2 Your air purier 5

Product overview 5

Controls overview 5

3 Getting started 5

Installing the lter 5

4 Using the air purier 6

Understanding the air quality light 6

Turning on and o 6

Changing the fan speed 7

Light sensor 7

Night sensing mode 7

Set the child lock 8

5 Cleaning 9

Cleaning the body of the air

purier 9

Cleaning the air quality sensor 9

Cleaning the pre-lter 10

6 Replacing the lter 11

Filter replacement indicator 11

Replacing the lters 11

Filter reset 12

7 Storage 12

8 Troubleshooting 13

1EN

English

9 Guarantee and service 15

Order parts or accessories 15

10 Notices 15

Electromagnetic elds (EMF) 15

Recycling 16

2 EN

service center authorized

by Philips, or similarly

qualified persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

1 Important

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or flammable

detergent enter the

appliance to avoid electric

shock and/or a fire

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(flammable) detergent to

avoid electric shock and/

or a fire hazard.

• Do not spray any

flammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all filters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips filters specially

intended for this

appliance. Do not use any

other filters.

• Combustion of the filter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the filter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

• Do not insert your fingers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use

the appliance on a

dry, stable, level, and

horizontal surface.

• Leave at least 20cm

free space behind and

on both sides of the

appliance and leave at

least 30cm free space

above the appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injuiry.

• Do not place the

appliance directly below

3EN

English

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply first.

• Do not move the

appliance by pulling its

power cord.

• Always wash your hands

thoroughly after changing

or cleaning a filter.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

fireplaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the filters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

4 EN

3 Getting started

Installing the lter

Note

• Make sure the air purifier is unplugged

from the electrical outlet before

installing the filter.

• Make sure the side of the filter with the

tag is pointing towards you.

1 Pull the bottom part of the front

panel and then gently lift to remove

it from the air purifier (Fig.c).

2 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

3 Remove all filters (Fig.e).

4 Remove all packaging materials

from the filter (Fig.f).

5 Place the thick filter (FY1410) into

the air purifier and then the thin AC

filter (FY1413) (Fig.g). The model

numbers are shown on each filter.

6 Attach the pre-filter back into the

air purifier (Fig.h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the purifier.

7 Reattach the front panel by

pressing the top part of the panel

onto the top of the air purifier (1).

Then, gently push the panel against

the body of the air purifier (2)

(Fig.i).

8 Wash your hands thoroughly after

installing filters.

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Product overview

A Control panel

B Air quality light

C Air outlet

D Air quality sensor

E

NanoProtect filter Series 3

(FY1410)

F NanoProtect filter AC (FY1413)

G Pre-filter

H Air inlet

I Front panel

Controls overview

J On/Off button

K Night sensing mode button

L Display screen

M Fan speed button

N Child lock button

5EN

English

Turning on and o

Note

• Always place the air purifier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purification performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purifier in the

wall outlet.

2 Touch to switch on the air purifier

(Fig.j).

» The air purifier beeps.

» The air purifier operates under

the auto mode by default.

» When the air purifier is warming

up, “ ” displays on the screen.

» After measuring the air

quality for approximately

30 seconds, the air quality

sensor automatically selects

the appropriate air quality light

color.

3 Touch and hold for 3 seconds to

switch off the air purifier.

Note

• If the air purifier stays connected to

the electrical outlet after turning OFF,

the air purifier will operate under the

previous settings when turned ON

again.

• If the air purifier accidentally shuts off

during running, it restarts automatically

and operates under previous settings

when the power supply is resumed.

4 Using the air

purifier

Understanding the air

quality light

Air quality light

color

Air quality level

Blue

Good

Blue-violet

Fair

Red-purple

Poor

Red

Very poor

The air quality light automatically goes

on when the air purifier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

6 EN

Light sensor

With the light sensor, the air purifier can

work according to the ambient light.

When the ambient light dims for

10 seconds, all the lights on the control

panel will be off slowly. During this

period, you can touch any of the

buttons, all lights will be on again. If you

don't perform other operations within

10 seconds, all lights will be off.

After the ambient light becomes bright

and lasts at least for 10 seconds, all

lights will be on again.

Night sensing mode

You can activate the night sensing

mode in two ways.

Activating the night sensing

mode manually

• Before you go to sleep, touch

manually to activate the night

sensing mode (Fig.o).

» If the air quality light is blue,

the air purifier directly goes to

the night sensing mode. The air

purifier operates quietly and the

air quality light will be dimmed.

» If the air quality light is not blue,

the air purifier operates under

turbo mode for a maximum of

10 minutes, the air quality light

blinks slow during this time, and

then goes to the night sensing

mode.

Changing the fan speed

There are several fan speeds available.

You can choose the auto mode, speed

1, 2, 3 or turbo mode (t).

Auto(A)

• Touch the fan speed button

repeatedly to select the auto mode

(Fig.k).

Allergen mode

The specially designed allergen

mode can effectively reduce common

allergens such as pollen and pet

dander.

• Touch the fan speed button to

select the Allergen mode (Fig.l).

» Auto (A) and display on the

screen.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (Fig.m).

Turbo (t)

In turbo mode, the air purifier operates

on the highest speed.

• Touch the fan speed button to

select the turbo mode (t) (Fig.n).

7EN

English

Set the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (Fig.p).

» The child lock icon displays

on the screen.

» When the child lock is on,

all the other buttons are not

responsive, only the child lock

icon blinks.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock (Fig.q).

» The child lock icon

disappears.

Note

• The child lock function is automatically

unlocked when the pre-filter cleaning

code or the filter replacement code

displays on the screen.

Auto activating the night

sensing mode

When the air purifier operates in auto

mode or allergen mode, if the light

sensor detects the lights in your room

are turned off, the air purifier goes to

the night sensing mode automatically.

The air purifier will adjust the fan speed

in real-time to make sure the air in your

room is clean. The air quality light will

be dimmed.

Note

• The light sensor detects the lights in

your room after 11 hours in the night

sensing mode.

• If the lights in your room are turned

on, the air purifier will quit the night

sensing mode and operate under the

previous mode. The air quality light

and the display will be on again.

• To exit the night sensing mode

manually, touch or button.

8 EN

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purifier.

Note

• If the air purifier is used in a dusty

environment, it may need to be

cleaned more often.

• If the humidity level in the room is

very high, condensation may develop

on the air quality sensor and the air

quality light may indicate a more poor

air quality even though the air quality

is actually good. If this occurs, clean

the air quality sensor or use the air

purifier on a manual speed setting.

1 Switch off the air purifier and

unplug from the wall outlet.

2 Clean the air quality sensor inlet

and outlet with a soft brush (Fig.r).

3 Remove the air quality sensor cover

(Fig.s).

4 Clean the air quality sensor, the

dust inlet and the dust outlet with a

damp cotton swab (Fig.t).

5 Dry all parts thoroughly with a dry

cotton swab.

6 Reattach the air quality sensor

cover (Fig.u).

Note

• Always keep air quality cover close

during the air purifier is working.

5 Cleaning

Note

• Always turn the air purifier off and

unplug the air purifier from the

electrical outlet before cleaning.

• Never immerse the air purifier in water

or any other liquid.

• Never use abrasive, aggressive, or

flammable cleaning agents such as

bleach or alcohol to clean any part of

the air purifier.

• Only the pre-filter is washable. The air

filter is not washable.

• Do not attempt to clean the filters or

air quality sensor with a vacuum.

Cleaning the body of the

air purier

Regularly clean the inside and outside

of the air purifier to prevent dust from

collecting.

1 Use a soft, dry cloth to clean both

the interior and exterior of the air

purifier (Especially for the front

cover).

2 The air outlet can also be cleaned

with a dry, soft cloth.

3 Detach the front cover from the air

purifier and wash it under running

tap water.

9EN

English

8 Put the plug of the air purifier in the

wall outlet.

9 Touch and hold the for

3 seconds to reset the pre-filter

cleaning time (Fig.x).

10 Wash your hands thoroughly after

installing filters.

Cleaning the pre-lter

Clean the pre-filter when F0 is displayed

on the screen (Fig.v).

1 Switch off the air purifier and

unplug from the wall outlet.

2 Pull the bottom part of the front

panel and then gently lift to remove

it from the air purifier (Fig.c).

3 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

4 If the pre-filter is very dirty, use a

soft brush to brush away the dust.

Then wash the pre-filter under

running tap water (Fig.w).

5 Allow the pre-filter to air dry

thoroughly before placing back in

the air purifier.

Note

• To optimize the lifetime of the pre-

filter, make sure it dries completely

after cleaning.

• Wash your hands after handling the

filter.

6 Put the pre-filter back into the air

purifier (Fig.h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the air purifier.

7 To reattach the front panel, press

the top part of the panel onto the

top of the air purifier (1). Then,

gently push the panel against the

body of the air purifier (2) (Fig.i).

10 EN

Filter alert light

status

Action

A3 displays on

the screen

Replace

NanoProtect filter

Series 3 (FY1410)

C7 displays on

the screen

Replace the

NanoProtect filter AC

(FY1413)

A3 and C7

display on

the screen

alternately

Replace both filters

1 Turn off the air purifier and unplug

from the wall outlet.

2 Take out the used air filter according

to the filter alert light status

displayed on the screen (Fig.y).

Discard used filter.

Note

• Do not touch the pleated filter surface,

or smell the filter as it has collected

pollutants from the air.

3 Remove all packaging material from

the new filter (Fig.f).

4 Place the new filters into the air

purifier (Fig.g).

5 Put the plug of the air purifier in the

wall outlet.

6 Touch and hold the for 3 seconds

to reset the filter lifetime counter

(Fig.z).

7 Wash your hands after changing a

filter.

6 Replacing the

filter

Filter replacement

indicator

This air purifier is equipped with a

filter replacement indicator to make

sure that the air purification filter is in

optimal condition when the air purifier

is operating. When the filters need to be

replaced, the filter code displays on the

screen.

If the filters are not replaced in 14 days,

the air purifier will stop operating and

automatically lock.

Replacing the lters

Note

• The air filters are not washable or

reusable.

• Always turn off the air purifier and

unplug from the electrical outlet

before replacing the filters.

• Do not clean the filter with a vacuum.

11EN

English

Filter reset

You can replace filters even if there is

no filter replacement code displayed on

the screen. After replacing a filter, you

need to reset the filter lifetime counter

manually.

1 Touch and simultaneously

for 3 seconds to enter the filter reset

mode (fig.{).

» Code (A3) of the NanoProtect

filter Series 3 displays on the

screen.

2 Touch and hold for 3 seconds to

force reset the filter lifetime counter

of the NanoProtect filter Series 3

(fig.z).

3 Code (C7) of the Nanoprotect filter

AC displays on the screen after the

lifetime counter of the NanoProtect

filter Series 3 has been reset (fig.|).

4 Touch and hold for 3 seconds to

force reset the filter lifetime counter

of the NanoProtect filter AC and exit

the filter reset mode (fig.}).

12 EN

7 Storage

1 Turn off the air purifier and unplug

from the wall outlet.

2 Clean the air purifier, air quality

sensor and pre-filter (see chapter

“Cleaning”).

3 Let all parts dry thoroughly before

storing.

4 Wrap the filter and pre-filter

separately in air tight plastic bags.

5 Store the air purifier, the filter and

pre-filter in a cool, dry location.

6 Always thoroughly wash hands

after handling filters.

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the air

purifier. If you are unable to solve the problem with the information below, visit

www.philips.com/support or contact the Consumer Care Center in your country.

Problem Possible solution

The air purier

does not work

even though it is

plugged in to the

wall outlet and

switched on.

• Try a different electrical outlet or check the wall switch.

• The filter alert status is displaying the filter code. Replace

the corresponding filter and reset the filter lifetime counter

(see chapter “Replacing the filter”).

• If the problem persists, contact the Consumer Care Center

in your country.

The air purier

does not work

even though it is

switched on.

• The filter replacement indicator has been on continuously

but you have not replaced the corresponding filter, and the

air purifier is now locked. In this case, replace the filter and

reset the filter lifetime counter.

The air purier

accidentally

powers o.

• The air purifier restarts automatically and goes to the

previous mode when the power resumes.

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-filter is dirty. Clean the pre-filter (see chapter

“Cleaning”).

The air quality

does not improve,

even though the air

purier has been

operating for a

long time.

• One of the filters has not been placed in the air purifier or

the filter is not placed properly. Make sure that all filters

are properly installed in the following order, starting with

the innermost filter:

1) NanoProtect filter Series 3 (FY1410);

2) NanoProtect filter AC (FY1413) 3) pre-filter.

The air quality sensor is wet. Make sure that the air quality

sensor is clean and dry (see chapter “Cleaning”).

13EN

English

Problem Possible solution

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter “Cleaning”).

The air purier

produces a

unpleasant smell.

• The first few times you use the air purifier, it may produce

a plastic smell. This is normal. The air purifier may also

produce an unpleasant smell when the filter is dirty. In this

case, clean or replace the appropriate filter.

• If the air purifier produces a burnt odor, switch OFF and

unplug from the electrical outlet. Contact the Consumer

Care Center in your country.

The air purier is

loud.

• If the air purifier is too loud, change the fan speed to a

lower fan speed level. When using the air purifier in a

bedroom at night, choose the night sensing mode or select

a lower fan speed level.

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the filter lifetime counter. Plug

in the air purifier, touch to switch on the air purifier, and

touch and hold the for 3 seconds.

Error codes “E1”,

“E2”, “E3” or “E4”

displays on the

screen.

• The air purifier has malfunctions. Contact the Consumer

Care Center in your country.

14 EN

9 Guarantee and

service

If you need information or if you have a

problem, please visit the Philips website

at www.philips.com or contact the

Philips Consumer Care Center in your

country (you find its phone number

in the worldwide guarantee leaflet). If

there is no Consumer Care Centre in

your country, go to your local Philips

dealer.

Order parts or

accessories

If you have to replace a part or want to

purchase an additional part, go to your

Philips dealer or visit www.philips.com/

support.

If you have problems obtaining the

parts, please contact the Philips

Consumer Care Center in your country

(you can find its phone number in the

worldwide guarantee leaflet).

15EN

English

10 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

fields.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health effects. Philips

confirms that if its products are handled

properly for their intended use, they

are safe to use according to scientific

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

16 EN

Recycling

This symbol means that this product

shall not be disposed of with normal

household waste (2012/19/EU).

Follow your country’s rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

Indhold

1 Vigtigt 18

2 Din luftrenser 21

Produktoversigt 21

Oversigt over knapper 21

3 Kom godt i gang 21

Montering af lteret 21

4 Brug af luftrenseren 22

Forklaring af luftkvalitetslyset 22

Sådan tændes og slukkes

apparatet 22

Ændring af blæserhastighed 22

Lyssensor 23

Mørkesensortilstand 23

Indstilling af børnesikring 24

5 Rengøring 24

Rengøring af luftrenserens

kabinet 24

Rengøring af

luftkvalitetssensoren 25

Rengøring af forlteret 25

6 Udskiftning af lteret 26

Indikator for udskiftning af lter 26

Udskiftning af ltre 26

Filternulstilling 27

7 Opbevaring 28

8 Fejlnding 29

17DA

Dansk

9 Garanti og service 31

Bestilling af dele eller tilbehør 31

10 Bemærkninger 31

Elektromagnetiske felter (EMF) 31

Genbrug 32

18 DA

• Hvis netledningen

beskadiges, må den

kun udskiftes af Philips,

et autoriseret Philips-

serviceværksted eller en

tilsvarende kvaliceret

fagmand for at undgå

enhver risiko.

• Brug aldrig apparatet,

hvis netstik, netledning

eller selve apparatet er

beskadiget.

• Dette apparat kan

bruges af børn fra 8 år

og opefter og personer

med reducerede fysiske,

sensoriske eller mentale

evner eller manglende

erfaring og viden, hvis de

er blevet instrueret i sikker

brug af apparatet og

forstår de medfølgende

risici. Lad ikke børn lege

med apparatet. Rengøring

og vedligeholdelse må

ikke foretages af børn

uden opsyn.

• Luftind- og -udtagene må

ikke blokeres, f.eks. ved at

stille ting på luftudtaget

eller foran luftindtaget.

• Sørg for, at

fremmedlegemer ikke

falder ind i apparatet

gennem luftudgangen.

1 Vigtigt

Læs denne brugsvejledning

omhyggeligt igennem, inden apparatet

tages i brug, og gem den til eventuelt

senere brug.

Fare

• Lad ikke vand eller

nogen andre væsker

eller brandbare

rengøringsmidler komme

i berøring med apparatet

for at undgå elektrisk stød

og/eller brandfare.

• Undlad at rengøre

apparatet med vand

eller andre væsker

eller (brandbart)

rengøringsmiddel for at

undgå elektrisk stød og/

eller brandfare.

• Sprøjt ikke brændbare

materialer som f.eks.

insektgift eller parfume

omkring apparatet.

Advarsel

• Kontrollér, om den

angivne netspænding

på apparatet svarer til

den lokale netspænding,

før du slutter strøm til

apparatet.

La pagina si sta caricando...

Philips AC1215/10 Manuale utente

Philips AC1215/10 Manuale utente

in altre lingue

Documenti correlati

Altri documenti