Candy FCDIEN528X WF Manuale utente

Categoria
Forni
Tipo
Manuale utente

Questo manuale è adatto anche per

CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
USER INSTRUCTIONS
OVENS
MANUALE D’ISTRUZIONI
FORNO
EN
IT
02
26
General Warnings
During cooking, moisture may condense inside
the oven cavity or on the glass of the door. This is a
normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before
putting food inside the oven. ln any case, the
condensation disappears when the oven reaches
the cooking temperature.
Cook the vegetables in a container with a lid
instead of an open tray.
Avoid leaving food inside the oven after cooking
for more than 15/20 minutes.
WARNING: the appliance and accessible parts
become hot during use. Be careful not to touch
any hot parts.
WARNING: the accessible parts can become hot
when the grill is in use. Children should be kept at
a safe distance.
WARNING: ensure that the appliance is
switched off before replacing the bulb, to avoid
the possibility of electric shocks.
• WARNING: in order to avoid any danger caused
by the accidental resetting of the thermal
interruption device, the appliance should not be
powered by an external switching device, such as
a timer, or be connected to a circuit that is
regularly switched on and off.
Children under 8 should be kept at a safe
distance from the appliance if not continuously
supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or
over and by those with limited physical, sensorial
or mental capacities, without experience or
knowledge of the product, only if supervised or
provided with instruction as to the operation of
the appliance, in a safe way with awareness of the
possible risks.
Cleaning and maintenance should not be carried
out by unsupervised children.
Do not use rough or abrasive materials or sharp
metal scrapers to clean the oven door glasses, as
they can scratch the surface and cause the glass to
shatter.
The oven must be switched off before removing
the removable parts. After cleaning, reassemble
them according the instructions.
Only use the meat probe recommended for this
oven.
Do not use a steam cleaner for cleaning
operations.
Connect a plug to the supply cable that is able to
bear the voltage, current and load indicated on
the tag and having the earth contact. The socket
must be suitable for the load indicated on the tag
and must have ground contact connected and in
operation. The earth conductor is yellow-green in
colour. This operation should be carried out by a
suitably qualified professional. ln case of
incompatibility between the socket and the
appliance plug, ask a qualified electrician to
substitute the socket with another suitable type.
The plug and the socket must be conformed to the
current norms of the installation country.
Connection to the power source can also be made
by placing an omnipolar breaker between the
appliance and the power source that can bear the
maximum connected load and that is in line with
current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The
socket or omnipolar breaker used for the
connection should be easily accessible when the
appliance is installed.
The disconnection may be achieved by having
the plug accessible or by incorporating a switch in
the fixed wiring in accordance with the wiring
rules.
lf the power cable is damaged, it should be
substituted with a cable or special bundle
available from the manufacturer or by contacting
the customer service department. The type of
power cable must be H05V2V2-F. This operation
should be carried out by a suitably qualified
professional. The earth conductor (yellow-green)
must be approximately 10 mm longer than the
other conductors. For any repairs, refer only to
the Customer Care Department and request the
use of original spare parts.
Failure to comply with the above can
compromise the safety of the appliance and
invalidate the guarantee.
Any excess of spilled material should be
removed before cleaning.
EN 02
A long power supply failure during an occurring
cooking phase may cause a malfunction of the
monitor. ln this case contact customer service.
The appliance must not be installed behind a
decorative door in order to avoid overheating.
When you place the shelf inside, make sure that
the stop is directed upwards and in the back of the
cavity. The shelf must be inserted completely into
the cavity.
• WARNING: Do not line the oven walls with
aluminium foil or single-use protection available
from stores. Aluminium foil or any other
protection, in direct contact with the hot enamel,
risk melting and deteriorating the enamel of the
insides.
WARNING: Never remove the oven door seal.
CAUTION: Do not refill the cavity bottom with
water during cooking or when the oven is hot.
No additional operation/setting is required in
order to operate the appliance at the rated
frequencies.
EN 03
General Instructions
5
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Declaration of compliance
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
6
3.1 Display description
3.2 Cooking modes
Use of the Oven
7
4.1 General notes on cleaning
4.2 Aquactiva Function
4.3 Maintenance
• Removing and cleaning wire racks
• Removal of the oven window
• Removal and cleaning of the glass door
• Changing the bulb
Oven Cleaning and Maintenance
11
5.1 F.A.Q.
Troubleshooting
13
Summary
EN 04
1. General Instructions
We thank you for choosing one of our products. For the best results with your oven, you should read
this manual carefully and retain it for future reference. Before installing the oven, take note of the serial
number so that you can give it to customer service staff if any repairs are required. Having removed the
oven from its packaging, check that it has not been damaged during transportation. If you have doubts,
do not use the oven and refer to a qualified technician for advice. Keep all of the packaging material
(plastic bags, polystyrene, nails) out of the reach of children. When the oven is switched on for the first
time, strong smelling smoke can develop, which is caused by the glue on the insulation panels
surrounding the oven heating for the first time. This is absolutely normal and, if it occurs, you should
wait for the smoke to dissipate before putting food in the oven. The manufacturer accepts no
responsibility in cases where the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you have purchased.
1.1 Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of
foods; any other use, for example as a heat source, is considered improper
and therefore dangerous. The manufacturer cannot be held responsible for
any damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some
fundamental rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not
recommended;
- in case of malfunction and/or poor operation, switch off the appliance and
do not tamper with it.
1.2 Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE
ELECTRICAL CONNECTIONS. The power supply to which the oven is
connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage
caused by the failure to observe these instructions. The oven must be
connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the
country of installation. The electrical supply should be protected with
suitable fuses and the cables used must have a transverse section that can
ensure correct supply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to
an electrical supply with 220-240 Vac 50 Hz power between the phases or
between the phase and neutral. Before the oven is connected to the
electrical supply, it is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.
The grounding wire connected to the oven's earth terminal must be
connected to the earth terminal of the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician
to check the continuity of the power supply's earth terminal. The
manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by
an earth connection that has defective continuity.
NOTE: as the oven could require maintenance work, it is advisable to keep
another wall socket available so that the oven can be connected to this if it
is removed from the space in which it is installed. The power cable must
only be substituted by technical service staff or by technicians with
equivalent qualifications.
1.3 Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven
perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection
available from stores. Aluminium foil or any other protection, in direct contact
with the hot enamel, risks melting and deteriorating the enamel of the insides.
In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It
is better to extend the cooking time and lower the temperature a little. In
addition to the accessories supplied with the oven, we advise you only use
dishes and baking moulds resistant to very high temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the
manufacturer is required to rectify faults arising from incorrect installation,
this assistance is not covered by the guarantee. The installation instructions
for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer
cannot be held responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing,
you must ensure good ventilation in the oven space to allow proper
circulation of the fresh air required for cooling and protecting the internal
parts. Make the openings specified on last page according to the type of
fitting.
1.5 Waste management and environmental protection
This appliance is labelled in accordance with European Directive
2012/19/EU regarding electric and electronic appliances (WEEE). The
WEEE contain both polluting substances (that can have a negative effect on
the environment) and base elements (that can be reused). It is
important that the WEEE undergo specific treatments to
correctly remove and dispose of the pollutants and recover all
the materials. Individuals can play an important role in
ensuring that the WEEE do not become an environmental
problem; it is essential to follow a few basic rules:
- the WEEE should not be treated as domestic waste;
- the WEEE should be taken to dedicated collection areas managed by the
town council or a registered company.
In many countries, domestic collections may be available for large WEEEs.
When you buy a new appliance, the old one can be returned to the vendor
who must accept it free of charge as a one-off, as long as the appliance is of
an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open
the oven door as infrequently as possible, because heat from the cavity
disperses every time it is opened. For a significant energy saving, switch off
the oven between 5 and 10 minutes before the planned end of the cooking
time, and use the residual heat that the oven continues to generate. Keep
the seals clean and in order, to avoid any heat dispersal outside of the
cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the
cooking process to start at the reduced tariff time slot.
EN 05
1.6 Declaration of compliance
By placing the mark on the appliance, we are confirming compliance
to all relevant European safety, health and environmental requirements
which are applicable in legislation for this product.
• Hereby, Candy Hoover Group Srl declares that the radio equipment is in
compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.candy-group.com.
2. Product Description
2.1 Overview
1. Control panel
2. Shelf positions (lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
2.2 Accessories (According to model)
Drip pan
1
Collects the residues that drip during the cooking of foods on the grills.
Lateral wire grids
3
It located at both sides of the oven cavity. It holds metal grills and drip pans.
2.3 First Use
PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a
solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
EN 06
Metal grill
2
Holds baking trays and plates.
1
2
3
5
4
6
175
1
10
2
6
5
3
4
7
8
9
3. Use of the Oven (According to model)
3.1 Display description
FUNCTION HOW TO DEACTIVATE WHAT IT DOES
NOTE
HOW TO USE
KEY LOCK
•Child Lock function is activated by
touching Set (+) for a minimum of 5
seconds. From this moment on all
other function are locked and the
display will flash 3 sec intervals STOP
and preset time intermittently.
•Child Lock function is deactivated by
touching touchpad Set (+) again for a
minimum of seconds. From this 5
mo m ent o n a l l f unc t ion s a re
selectable again.
•Push the central button 3 times
•Press the buttons "-" "+" to set
the required time
•Release all the buttons
•When the set time has elapsed, an
audible alarm is full stop after
activated this alarm will stop on its
own, however it can be stopped
immediately by pressing any button.
•Sounds an alarm at the end of the
set time.
During the process, the display
shows the remaining time.
•Allows to use the oven as alarm clock
(could be activated either with operating
the oven or with out operating the oven)
•Select the cooking function with the
oven function knob, the temperature
you want to cook with the thermostat
knob.
Push the central button 1 times
Press the buttons "-" or "+"to set the
lenght of cooking required
Release all buttons
NOTE: If the oven is switched off or
the lamp is functioning, the cooking
time schedule function will not work.
It allows to preset the cooking time
required for the recipe chosen.
• To check how long is left to run press
the MENU button 1 time.
To alter/change the preset time press
MENU and "-" "+" buttons.
Push any button to stop the signal.
Push the central button to return to
the clock function.
•At the end of the program the program
gives 3 warning signals and “End” appears
on the display.
Set the function selector switch to "0" to
return to the clock function.
•At the time set, the oven will switch
off. To switch off manually, turn the
oven function selector to position O.
Enables you to set the end of
cooking time
•To check the preset time push the
central button 2 times
•To modify the preset time press
buttons MENU + "-" "+"
•Select the cooking function with the
oven function knob, the temperature
you want to cook with the thermostat
knob.
•Push the central button times 2
•Press the buttons "-" "+" to set the
time at which you wish the oven to
switch off
•Release the buttons
NOTE: If the oven is switched off or
the lamp is functioning, the cooking
time schedule function will not work.
This function is typically used with
cooking time” function.
For example if the dish has to be cooked for
45 minutes and needs to be ready by
12:30, simp ly select the required
function, set the cooking time to 45
minutes and the end of cooking time to
12:30.
•At the end of the cooking set time, the
oven will switch off automatically and an
audible alarm will ring.
•Cooking will start automatically at 11:45
(12:30 minus 45 mins) and will continue
until the pre-set end-of-cooking-time,
when the oven will switch itself off
automatically.
END OF
COOKING
COOKING
TIME
MINUTE
MINDER
EN 07
WARNING : the first operation to carry out after the oven has been installed or following the interruption
of power supply (this is recognizable the display pulsating and showing ) is setting the correct time. 12:00
The bottom right LED flashes at the same time ( ). This is achieved as follows.
•Set time with buttons."-" "+"
•Push the Menu button or wait 5 seconds than the clock is setted.
ATTENTION: The oven will only operate setting the clock
1. Thermostat selector knob
2. Thermostat signal lamp
3. End of cooking
4. Cooking time
5. Temperature or clock display
6. LCD display adjustment controls
7. Minute minder
8. Clock setting
9. Wifi signal lamp
10. Function selector knob
1. Program selection / 2. Program duration / 3. Cooking start setting / 4- Dedicated recipes selection / 5. Offline and vocal assistant /
6. Tips, suggestions and online user manual
1 2
3 4
6
5
ELETTRONICA ZERO WIFI FUNCTION
For all the details related to the link between app and product, refer to the Quick Guide.
The Quick Guide is available on: go.candy-group.com/candy-ov
Wi Fi has two different positions on the cooking selector:
• Wi Fi on: Wi Fi is switched on only if the oven is already enrolled to your device. In this position the oven will be only controlled by
remote.
• Wi Fi reset: After leaving the selector on Wi Fi reset for 30”, Bluetooth will switch on and you will be able to enroll the oven to your
device within 5.
If the enrollment is successful, the oven will be controlled by remote and the Wi Fi icon will switch on. If the enrollment is unsuccessful,
Wi Fi will switch off and the oven will be reset.
To proceed with a new enrollment the cooking program selector has to be turned out from Wi Fi reset position and moved again on it.
Note: Install the App on your device before starting enrolling
Note: The device where the App is installed must have Bluetooth activated
Note: For both Wi Fi positions, the touch buttons do not work.
Note: It is important to establish a good Wi-Fi signal strength between the home router and the appliance. When the oven is trying to
connect to router the icon will blink 3” on and 1off, when it is already connected the icon will switch on.
EN 08
CANDY SIMPLY-FI:
For detailed information about HOW TO CONNECT your simply-Fi appliance and HOW TO USE it at its
best, go to http://www.candysimplyfi.com
WIRELESS PARAMETERS
Bluetooth v4.2
2,412 GHz. – 2,484 GHz
Basic data rate:
RF Transmit Power (Typ):
+4 dBm
Enhanced data rate:
RF Transmit Power (Typ):
+2 dBm
BLE:
RF Transmit Power (Typ):
+7.5 dBm
802.11 b/g/n
2,412 GHz. – 2,484 GHz
802.11b. DSSS 1 Mbps=
+19.5 dBm
802.11b. CCK 11 Mbps=
+18.5 dBm
802.11g. OFDM 54 Mbps=
+18.5 dBm
802.11n. MCS7=
+14 dBm
802.11b =1024 bytes,
-80 dBm
802.11g =1024 bytes,
-70 dBm
802.11n =1024 bytes,
-65 dBm
802.11n HT40 =1024 bytes,
-65 dBm
Wireless Standart
Frequency Range
Max Transmit Power
Minimum Receiving
Sensivity
Parameter
Specifications
(Wi-Fi)
Specifications
(Bluetooth)
Basic data rate:
Sensivity@ 0.1% BER:
-98 dBm
Enhanced data rate:
Sensivity@ 001% BER:
-98 dBm
BLE:
Sensivity@ 0.1% BER:
-98 dBm
Product information for networked equipment
power consumption of the product in
networked standby if all wired network
ports are connected and all wireless
network ports are activated:
2,0 W
How to activate wireless network port:
Starting from an oven that is not enrolled,
putting the right knob on the Reset position.
Wifi module is switched on after 30".
If oven is enrolled with WiFi off, putting the
right knob on WiFi position the WiFi module
is switched on.
How to deactivate wireless network port:
If oven is enrolled, putting the right knob on
Reset position the WiFi module is switched
off.
Quick Guide Candy OVEN - Enrollment on App
Procedure for devices with Bluetooth 4.0 (or higher)
IMPORTANT
This quick guide illustrates the steps to follow to enroll your appliance on
the App Candy simply-Fi, using a device with Bluetooth 4.0 (or higher)
technology. In this case, the procedure is simplified and faster (Easy
Enrollment). If you are using a device without Bluetooth technology (or less
than 4.0), please follow the instructions described on the other side of this
guide.
STEP 1
Mark down the appliance Serial Number.
Mark down the Wi-Fi Name and Password (WPA/WEP Key) which are
normally placed on the back of your Wi-Fi router.NOTES
The frequency of the home Wi-Fi network has to be set on the 2.4 GHz
band. You cannot configure the appliance if your home network is set to the
5 GHz band.
If you are having trouble locating the WPA/WEP Password, please contact
your Internet Provider.
Please make sure your smartphone is connected to the same Wi-Fi
network and has the Bluetooth enabled within the “Settings”. Refer to the
manual for more details.
STEP 2
Download the Candy simply-Fi App from the Store.
Open the Candy simply-Fi App and create your user profile by taping on
“Register. Accept the privacy policy and fill in the required fields.
NOTES
The App is available for Android (version 4.4 or higher) and iOS (version
8.0 or higher) devices.
If you already have a Candy simply-Fi user profile, you can login using your
credentials.
STEP 3
In the homepage, tap on the icon with the three bars on the top left to
enter your profile, then tap on “REGISTER NEW APPLIANCE” and select the
name of the product that you want to enroll.
STEP 4
Insert the purchase date of your appliance (DD/MM/YYYY), then tap on
“Proceed”.
STEP 5
Insert the 16 digits of the serial number or scan the QR code on the
appliance. Tap on “Next. Check data correctness of the data and tap on
“Confirm”. Once the system has recognized the product, tap on “Next”.
STEP 6
On the appliance:
1) Turn the knob to the WI-FI RESET program and wait 30 seconds.
2) When the Wi-Fi indicator starts blinking quickly, Bluetooth will come on
for 5' and you can proceed with enrollment within 5 minutes.
In App:
Tap on “Confirm”. Wait for APP to connect to the appliance.
NOTES
In case of any issue, tap “Retry”, making sure you have enabled Bluetooth
on your device (smartphone / tablet). If the process has not been
completed correctly yet, tap on “Proceed with Standard Enrollment.
To ensure correct data transfer, we recommend you to stay with the
device close to the appliance.
STEP 7
Insert the password of your home Wi-Fi network.
Select the type of password (WEP or WPA), then tap on “Confirm”.
The enrollment process is now finished.
NOTES
If this is not automatically synchronised by the App, please insert the
name of your home Wi-Fi network in the first box; pay attention to the
difference between lowercase and uppercase.
IF THE SET UP IS NOT SUCCESSFUL
It's important to establish a good Wi-Fi signal strength between the home
router and the appliance: low Wi-Fi signal strength would cause the failure
of the final stage of the set up. To assess if this is the case, start the
connection process again from Step 1; when you get to Step 6, when you
get to Step 6, place your device (smartphone or tablet) next to the router
and search for “WIFIOVEN-xyzk” net generated by the appliance. If this
does not come up as an option, it means that the router cannot see the
appliance. In this case, we highly recommend you to bring the router near
the appliance (if possible) or contact your internet provider to purchase a
compatible “Wi-Fi Range Extenderto increase the signal strenght.
Remote control mode
Turn the program selection knob to the WI-FI position: the wifi light will
turn on and you can now control the oven remotely.
NOTES
Warning, if the enrolled oven is left on the WI-FI RESET position for more
than 5 minutes, the oven will be reset and you will have to proceed with a
new enrollment.
Quick Guide Candy OVEN - Enrollment on App
Procedure for devices without Bluetooth 4.0 (or less than 4.0)
IMPORTANT
This quick guide outlines the steps you should follow to enroll your
appliance using the App Candy simply-Fi, utilizing a device without
Bluetooth technology. We recommend you to proceed with a
smartphone/tablet equipped with this technology to make the procedure
simpler.
If you are using a device with Bluetooth technology (or higher than 4.0),
please follow the instructions described on the other side of this guide.
STEP 1
Make a note of the appliance Serial Number and Wi-Fi Name and
Password (WPA/WEP Key), which are normally found on the back of your
Wi-Fi router.
Please make sure that your smartphone/ tablet is connected to the same
Wi-Fi network.
NOTES
The frequency of the home Wi-Fi network has to be set on the 2.4 GHz
band. You can not configure the appliance if your home network is set to
the 5 GHz band.
If you are having trouble locating the WPA/WEP Password, please contact
your Internet Provider.
STEP 2
Download the Candy simply-Fi App from the Store.
Open the Candy simply-Fi App and create your user profile by taping on
“Register. Accept the privacy policy and fill in the required fields.
NOTES
The App is available for Android (version 4.4 or higher) and iOS (version
8.0 or higher) devices.
If you already have a Candy simply-Fi user profile, you can login using your
credentials.
STEP 3
In the homepage, tap on the icon with the three bars on the top left to
enter your profile, then tap on “REGISTER NEW APPLIANCE” and select the
name of the product that you want to enroll.
STEP 4
Insert the purchase date of your appliance (DD/MM/YYYY), then tap on
“Proceed”.
STEP 5
Insert the 16 digits of the serial number or scan the QR code on the
appliance. Tap on “Next”. Check data correctness and tap on “Confirm”.
Once the system has recognized the product, tap on “Next.
STEP 6
On the appliance - Turn the knob to the WI-FI RESET program and wait 5
minutes. The countdown will appear on the App, after which you can
complete enrollment.
In App- Tap on “Confirm”.
NOTES
To ensure correct data transfer, we recommend that you stay with the
device close to the appliance.
STEP 7
Exit the Candy simply-Fi App.
Go to your device Wi-Fi settings.
STEP 8
In the list of available Wi-Fi networks, select “WIFIOVEN-xyzk”.
NOTES
If you do not find it, wait few more seconds or proceed with a new scan.
STEP 9
Exit from the settings of your device.
Return to the Candy simply-Fi App and wait for the App to detect the
appliance.
Once the “Wi-Fi Network is active” screen appears, tap on “Next.
STEP 10
Insert the password of your home Wi-Fi network.
Select the type of password (WEP or WPA), then tap on “Confirm”.
NOTES
If this is not automatically synchronised by the App, please insert the
name of your home Wi-Fi network in the first box; pay attention to the
difference between lowercase and uppercase.
STEP 11
Wait until the end of the data transfer process between the App and the
product, then tap on “Confirm”. “CONNECTED” appears on the appliance
display and then “REMOTE CONTROL ON”.
The enrollment process is now finished.
IF THE SET UP IS NOT SUCCESSFUL
It's important to establish a good Wi-Fi signal strength between the home
router and the appliance: low Wi-Fi signal strength would cause the failure
of the final stage of the set up. To assess if this is the case, start the
connection process again from Step 1; when you get to Step 6, place your
device (smartphone or tablet) next to the router and search for
“WIFIOVEN-xyzk” net generated by the appliance. If this does not come up
as an option, it means that the router cannot see the appliance. In this case,
we highly recommend you to bring the router near the appliance (if
possible) or contact your internet provider to purchase a compatible “Wi-Fi
Range Extenderto increase the signal strenght.
Remote control mode
Turn the program selection knob to the WI-FI position: the wifi light will
turn on and you can now control the oven remotely.
NOTES
Warning, if the enrolled oven is left on the WI-FI RESET position for more
than 5 minutes, the oven will be reset and you will have to proceed with a
new enrollment.
EN 09
3.2 Cooking Modes
EN 10
T °C
Suggested
180
210
230
Function
Dial
Function (Depends on the oven model)
LAMP: Turns on the oven light.
220
190
*
GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature. Five minutes preheating is required to get the
elements red-hot. Success is guaranteed for grills, kebabs and gratin dishes. White meats should be put at a distance from the
grill; the cooking time is longer, but the meat will be tastier. You can put red meats and fish fillets on the shelf with the drip tray
underneath. The oven has two grill positions: Grill: 2140 W Barbecue: 3340 W
MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish and vegetables. Heat penetrates into the food
better and both the cooking and preheating times are reduced. You can cook different foods at the same time with or without
the same preparation in one or more positions. This cooking method gives even heat distribution and the smells are not mixed.
Allow about ten minutes extra when cooking foods at the same time.
DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it
defrosts in a few minutes without the protein content of the food being changed or altered.
BOTTOM HEATING + FAN: The bottom heating element is used with the fan circulating the air inside the oven. This method is
ideal for juicy fruit flans, tarts, quiches and pâté.
It prevents food from drying and encourages rising in cakes, bread dough and other bottom-cooked food.
Place the shelf in the bottom position.
CONVENTIONAL: Both top and bottom heating elements are used. Preheat the oven for about ten minutes. This method is
ideal for all traditional roasting and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil wrapped food
(papillotes), flaky pastry. Place the food and its dish on a shelf in mid position.
COOK LIGHT: This function allows to cook in a healthier way, by reducing the amount of fat or oil required. The combination of
heating elements with a pulsating cycle of air ensures a perfect baking result.
WIFI ON: Oven allows wifi connection.
WIFI RESET: It allows wifi connection to be restarted.
* Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.
*
T °C
Range
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
210
CONVENTION + FAN + STEAM: Selecting this function, the lower and upper heating elements work together with the fan for a
uniform cooking on all levels. It is necessary to add 150 ml of water in the cavity and rotate the knob to this function. This
cooking method enhances the tendemess and flavors of each dısh, especially roasting and red meat.
50 ÷ MAX
220
CONVENTIONAL + STEAM: Both top and bottom heating elements will be switched on using the water inside the cavity to
generate steam. It is necessary to add 150 ml of water in the cavity and rotate the knob to this homogeneous cooking
performance.
50 ÷ MAX
180
BOTTOM HEATING + FAN + STEAM: The bottom heating element is used with the fan circulating the air inside the oven. For
the steam generation, it is necessary to add 150 ml of water in the cavity and rotate the knob to this function. The steam option
together with the bottom heating and the fan, ensures a perfect leavening and cooking to bread.
50 ÷ MAX
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning.
Wait for the oven to cool before carrying out manual cleaning operations.
Never use abrasive detergents, steel wool or sharp objects for cleaning, so
as to not irreparably damage the enamelled parts. Use only water, soap or
bleach-based detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after
every use of the oven. To remove more obstinate stains, you can use a
detergent-soaked sponge, well wrung out, and then rinse with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them:
avoid using abrasive detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a
container and wash the pan in hot water, using a sponge and washing-up
liquid.
If greasy residues remain, immerse the pan in water and detergent.
Alternatively, you can wash the pan in the dishwasher or use a commercial
oven detergent. Never put a dirty pan back into the oven.
EN 11
INSTRUCTION FOR REMOVAL AND CLEANING OF THE SIDE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are dried afterwards.
3. After the cleaning process install the wire racks in reverse order.
4.3 Maintenance
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them downwards.
3. Replace the window by carrying out the procedure in reverse.
4.2 Aquactiva Function
The Aquactiva procedure uses steam to help remove remaining fat and food particles from the oven.
1. Pour 300 ml of water into the Aquactiva container at the bottom of the oven.
2. Set the oven function to Static ( )or Bottom ( )heater
3. Set the temperature to the Aquactiva icon
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program and allow the oven to cool down.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning: Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns.
Use distilled or drinkable water.
300 ml
LOW-E
1
2
3
1.
2.
3.
4.
5.
6.
7.
REMOVAL AND CLEANING OF THE GLASS DOOR
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
On all glass, the indication "Low-E" must be legible and positioned on the left side of the door, close to the left-hand lateral hinge. In this way, the printed
label of the first glass will be inside the door.
EN 12
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
A cooking function and
temperature has not been set
Ensure that the necessary
settings are correct
The oven does not heat up
Steam and condensation on
the user interface panel
Clean with a microfiber cloth the user
interface panel to remove the
condensation layer
No reaction of the touch
user interface
EN 13
Indicazioni di Sicurezza
Durante la cottura, l'umidità può condensarsi
all'interno del vano cottura o sul vetro della porta.
Questa è una condizione normale. Per ridurre
questo effetto, attendere 10-15 minuti dopo
l'accensione prima di mettere gli alimenti
all'interno del forno. In ogni caso, la condensa
scompare quando il forno raggiunge la
temperatura di cottura.
Cuocere le verdure in un contenitore con
coperchio invece che in un vassoio aperto.
• Evitare di lasciare gli alimenti all'interno del
forno dopo la cottura per più di 15/20 minuti.
AVVERTENZA: l'elettrodomestico e le sue parti
accessibili diventano calde durante l’uso.
Fare attenzione a non entrare in contatto con
componenti surriscaldati.
AVVERTENZA: le parti accessibili possono
diventare calde quando si utilizza il grill. I bambini
devono rimanere a distanza di sicurezza.
AVVERTENZA: assicurarsi che l'elettrodomestico
sia spento prima di sostituire la lampadina per
evitare ogni possibilità di folgorazione.
AVVERTENZA: per evitare rischi causati da un
involontario ripristino dell'interruttore
automatico, l'elettrodomestico non deve essere
alimentato da un dispositivo di commutazione
esterno, quale ad esempio un
contaminuti, oppure essere collegato ad un
circuito che viene regolarmente acceso e spento.
Mantenere lontano dall'elettrodomestico i
bambini di età inferiore agli 8 anni, a meno che
non siano continuamente supervisionati.
I bambini non devono giocare con
l’elettrodomestico. L'elettrodomestico può
essere utilizzato da bambini di età superiore a 8
anni e da persone con ridotte capacità fisiche,
sensoriali o mentali, oppure prive di esperienza e
conoscenza, che siano state supervisionate o
istruite riguardo all’uso dell’elettrodomestico in
sicurezza, comprendendo i rischi che derivano
dall'uso dello stesso.
Le operazioni di pulizia e manutenzione non
devono essere effettuate dai bambini senza
sorveglianza.
Non utilizzare materiali ruvidi, abrasivi o
raschietti metallici affilati per pulire le porte in
vetro del forno, dato che possono graffiare la
superficie e causare la frantumazione del vetro.
• Il forno deve essere spento prima di rimuovere
le parti rimovibili.
Dopo la pulizia, rimontarle secondo le istruzioni.
Utilizzare solo la sonda carne consigliata per
questo forno.
• Non utilizzare un getto di vapore per pulire
l’elettrodomestico.
Collegare al cavo di alimentazione una spina
dimensionata per la tensione, la corrente e la
potenza indicate nella targhetta e dotata del
contatto di terra. La presa deve essere adatta al
carico indicato sulla targhetta e deve avere il
contatto di terra collegato e in funzione. Il
conduttore di terra è di colore giallo-verde.
Questa operazione deve essere eseguita solo da
un tecnico adeguatamente addestrato. In caso di
i n c o m p a t i b i l i t à t r a p r e s a e s p i n a
dell'elettrodomestico, richiedere ad un tecnico
specializzato di sostituire la presa con un'altra di
tipo compatibile. La spina e la presa devono
essere conformi alle normative attuali del paese
di installazione.
Il collegamento alla rete di alimentazione può
essere effettuato anche collocando un
interruttore automatico onnipolare tra
l'elettrodomestico e la rete di alimentazione, in
grado di supportare il carico massimo collegato, in
linea con la legislazione corrente.
Il cavo di terra giallo-verde non deve essere
interrotto dall'interruttore automatico. La presa o
l'interruttore automatico onnipolare utilizzati per
il collegamento devono essere facilmente
accessibili al momento del montaggio
dell'elettrodomestico.
La disconnessione può essere eseguita con la
spina accessibile o aggiungendo un interruttore
sul cablaggio fisso, nel rispetto delle normative
relative ai cablaggi.
Se il cavo di alimentazione si danneggia, deve
essere sostituito con un cavo o uno speciale fascio
di cavi disponibile presso il produttore o
contattando il reparto assistenza al cliente.
• Il cavo di alimentazione deve essere di tipo
H05V2V2-F
IT 14
Questa operazione deve essere eseguita solo da
un tecnico adeguatamente addestrato. Il
conduttore di terra (giallo-verde) deve essere
circa 10 mm più lungo degli altri conduttori. Per
qualsiasi tipo di riparazione, fare riferimento
unicamente al Reparto di Assistenza Cliente e
richiedere l'utilizzo di ricambi originali.
Il mancato rispetto di quanto indicato sopra può
c o m p r o m e t t e r e l a s i c u r e z z a
dell'elettrodomestico e rendere nulla la garanzia.
Qualsiasi materiale fuoriuscito in eccesso deve
essere tolto prima della pulizia.
L’interruzione prolungata dell’alimentazione
durante una fase di cottura potrebbe causare un
guasto del monitor. In tal caso contattare il servizio
clienti.
Lelettrodomestico non deve essere installato
dietro a una porta a scopo ornamentale per
evitarne il surriscaldamento.
Quando si posiziona uno scaffale all’interno,
accertarsi che il blocco sia rivolto verso l’alto e
nella parte posteriore della guida. Lo scaffale deve
essere inserito completamente nella guida
AVVERTENZA: Non rivestire le pareti del forno
con fogli di alluminio o protezioni monouso
disponibili nei negozi. I fogli di
alluminio o qualsiasi altra protezione, a diretto
contatto con lo smalto caldo, rischiano di
fondere e deteriorare lo smalto degli interni.
AVVERTENZA: Non togliere mai la guarnizione
della porta del forno.
• ATTENZIONE: Non riempire il fondo della cavità
con acqua durante la cottura o quando il forno è
caldo.
Per far funzionare l'apparecchio alle frequenze
nominali non sono necessarie ulteriori operazioni
o regolazioni.
IT 15
Avvertenze Generali
17
1.1 Suggerimenti sulla sicurezza
1.2 Sicurezza elettrica
1.3 Raccomandazioni
1.4 Installazione
1.5 Gestione dei rifiuti
1.6 Dichiarazione di conformità
2.1 Panoramica
2.2 Accessori
2.3 Primo utilizzo
Descrizione del Prodotto
18
3.1 Descrizione del display
3.2 Modalità di cottura
Utilizzo del Forno
19
4.1. Note generiche di pulizia
4.2 Funzione Aquactiva
4.3 Manutenzione
• Rimozione e pulizia delle griglie
• Rimozione dello sportello del forno
• Rimozione e pulizia della porta in vetro
• Sostituzione della lampadina
Pulizia e Manutenzione del Forno
23
5.1 F.A.Q.
Risoluzione dei problemi
25
Garanzie
25
Sommario
IT 16
Vi ringraziamo per aver scelto uno dei nostri prodotti. Per utilizzare il forno in modo ottimale è consigliabile
leggere con attenzione questo manuale e conservarlo con cura per ogni ulteriore consultazione. Prima di
installare il forno, prendere nota del numero di serie in modo da poterlo comunicare al personale del servizio di
assistenza in caso di richiesta di intervento. Dopo aver rimosso il forno dall’imballaggio, verificare che non abbia
subito danni durante il trasporto. In caso di dubbi, non utilizzare il forno e richiedere l’assistenza di un tecnico
qualificato. Tenere tutto il materiale da imballaggio (sacchetti di plastica, polistirolo, chiodi) fuori dalla portata dei
bambini. Alla prima accensione del forno può svilupparsi fumo di odore acre, causato dal primo riscaldamento
del collante dei pannelli d’isolamento avvolgenti il forno: si tratta di un fenomeno assolutamente normale e, in
caso si verificasse, occorre attendere la cessazione del fumo prima di introdurre le vivande. Il produttore declina
ogni responsabilità in caso di mancata osservanza delle istruzioni contenute in questo documento.
NOTA: le funzioni, le proprietà e gli accessori dei forni citati in questo manuale possono variare a seconda dei
modelli.
Utilizzare il forno solo per lo scopo per cui è stato progettato, ossia solo per la
cottura di alimenti; qualsiasi altro utilizzo, ad esempio come fonte di
riscaldamento, è considerato improprio e quindi pericoloso. Il costruttore non
può essere considerato responsabile per eventuali danni derivanti da usi
impropri, erronei ed irragionevoli.
Luso di un qualsiasi apparecchio elettrico comporta l’osservanza di alcune
regole fondamentali:
- non tirare il cavo di alimentazione per staccare la spina della presa di corrente;
- non toccare l’apparecchio con mani o piedi bagnati o umidi;
- in generale è sconsigliabile l’uso di adattatori, prese multiple e prolunghe;
- in caso di guasto e/o cattivo funzionamento dell’apparecchio, spegnerlo e non
manometterlo.
1. Avvertenze Generali
1.1 Suggerimenti sulla Sicurezza
1.2 Sicurezza Elettrica
FARE EFFETTUARE I COLLEGAMENTI ELETTRICI AD UN’ELETTRICISTA O TECNICO
QUALIFICATO.
La rete di alimentazione a cui viene collegato il forno deve essere conforme con
le normative in vigore nel paese di installazione. Il produttore declina ogni
responsabilità per eventuali danni derivanti dalla mancata osservanza di tali
disposizioni. Il forno deve essere collegato alla rete elettrica tramite una presa a
muro con messa a terra o tramite un sezionatore con più poli, a seconda delle
disposizioni in vigore nel paese di installazione. La rete elettrica deve essere
protetta mediante fusibili idonei e devono essere utilizzati cavi con una sezione
trasversale idonea a garantire una corretta alimentazione del forno.
COLLEGAMENTO
Il forno viene fornito con un cavo di alimentazione che deve essere collegato
solo a una rete elettrica con una tensione di 230 VCA tra le fasi o tra la fase e il
neutro. Prima di collegare il forno alla rete elettrica, è indispensabile
controllare:
- la tensione di alimentazione indicata sul misuratore;
- l’impostazione del sezionatore.
Il filo di messa a terra collegato al morsetto di terra del forno deve essere
collegato al morsetto di terra della rete elettrica.
ATTENZIONE
Prima di collegare il forno alla rete elettrica, far controllare la continuità della
messa a terra della rete elettrica ad un elettricista qualificato. Il produttore
declina ogni responsabilità per eventuali incidenti o altri problemi derivanti dal
mancato collegamento a terra del forno o dal suo collegamento ad una messa a
terra con una continuità difettosa.
NOTA: poiché il forno potrebbe richiedere interventi di assistenza, è
consigliabile prevedere la disponibilità di un’ulteriore presa a muro a cui
collegare il forno dopo che è stato rimosso dallo spazio in cui è stato installato. Il
cavo di alimentazione deve essere sostituito solo dal personale dell’assistenza
tecnica o da tecnici con qualifiche analoghe.
1.3 Raccomandazioni
Dopo l’uso sono sufficienti alcune semplici operazioni di pulizia per mantenere
il forno perfettamente pulito. Non rivestire le pareti del forno con fogli
d’alluminio da cucina o fogli monouso commerciali, perché potrebbero fondersi
a contatto con le superfici in smalto caldo e danneggiare le superfici in smalto
all’interno del forno. Per evitare di sporcare eccessivamente il forno e prevenire
la diffusione di fumo maleodorante, è consigliabile non utilizzare il forno a
temperature molto alte. E’ generalmente preferibile imposta- re un tempo di
cottura più lungo e utilizzare una temperatura più bassa. Oltre agli accessori
forniti con il forno, è consigliabile utilizzare piatti e teglie resistenti alle alte
temperature.
1.4 Installazione
Il produttore non è obbligato ad occuparsi dell’installazione. Gli eventuali
interventi di assistenza, necessari per correggere problemi dovuti ad un’errata
installazione, non sono coperti da garanzia. L’installazione deve essere
effettuata da un tecnico qualificato e in conformità con queste istruzio- ni.
Un’installazione impropria potrebbe causare infortuni alle persone, agli animali
domestici o danni alle attrezzature. Il produttore declina ogni responsabilità
per eventuali lesioni o danni dovuti ad un’errata installazione.
Il forno può essere installato sopra una colonna o sotto a un piano di lavoro.
Prima di fissare in posizione il forno, verificare che lo spazio attorno allo stesso
sia sufficiente a garantire la circolazione del flusso di aria fresco necessario a
garantire il raffreddamento del forno e la sicurezza dei componenti interni.
Realizzare le aperture indicate nell’ultima pagina del manuale, a seconda del
tipo di installazione.
1.5 Gestione dei rifiuti e rispetto dell’ambiente
Questo apparecchio è contrassegnato in conformità alla Direttiva
europea 2012/19/EU sulle apparecchiature elettriche ed
elettroniche (WEEE). I WEEE contengono sia sostanze inquinanti
(che possono provocare conseguenze negative sull’ambiente) che
componenti di base (che possono essere riutilizzati). E’
importante che i WEEE siano soggetti a trattamenti specifici per
rimuovere e smaltire correttamente tutti gli inquinanti e
recuperare tutti i materiali. I singoli possono giocare un ruolo importante
nell’assicurare che i WEEE non diventino un problema ambientale; è essenziale
seguire alcune regole di base:
- i WEEE non devono essere trattati come rifiuti domestici;
- i WEEE devono essere portati ai punti di raccolta appositi gestiti dal comune o
da società registrate.
In molti paesi, per i WEEE di grandi dimensioni, potrebbe essere presente la
raccolta domestica. Quando si acquista un nuovo apparecchio, quello vecchio
potrebbe essere restituito al rivenditore che deve acquisirlo gratuitamente su
base singola, sempre che l’apparecchio sia del tipo equivalente e abbia le stesse
funzioni di quello acquistato.
RISPARMIARE E RISPETTARE LAMBIENTE
Ove possibile, evitare di pre-riscaldare il forno e cercare sempre di riempirlo.
Aprire la porta del forno quanto necessario, perché vi sono dispersioni di calore
ogni volta che viene aperta. Per risparmiare molta energia sarà sufficiente
spegnere il forno dai 5 ai 10 minuti prima della fine del tempo di cottura
pianificato, e servirsi del calore che il forno continua a generare. Tenere le
guarnizioni pulite e in ordine, per evitare eventuali dispersioni di energia. Se si
dispone di un contratto di energia elettrica a tariffa oraria, il programma
cottura ritardata” renderà più semplice il risparmio spostando l’avvio del
programma negli orari a tariffa ridotta.
IT 17
1.6 Dichiarazione di conformità
• Apponendo il marchio su questo prodotto, confermiamo la conformità a
tutti i requisiti di legge europei in materia di sicurezza, salute e tutela ambientale
applicabili per legge a questo prodotto.
Il fabbricante, Candy Hoover Group Srl, dichiara che l'apparecchiatura radio è
conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di
conformità UE è disponibile al seguente indirizzo Internet: www.candy-group.com
2. Descrizione del Prodotto
2.1 Panoramica
1. Pannello di controllo
2. Posizioni ripiani (castelletto se previsto)
3. Griglia metallica
4. Leccarda
5. Ventola (dietro alla piastra di acciaio)
6. Porta forno
2.2 Accessori (A seconda del modello
Leccarda
1
Raccoglie i residui di cibo che gocciolano durante la cottura.
Griglie laterali a rete
3
Si trovano su entrambi i lati del vano cottura. Contengono griglie
metalliche e vaschette raccogligocce.
2.3 Primo utilizzo
PULIZIA PRELIMINARE
Pulire sempre il forno prima di utilizzarlo per la prima volta. Pulire le superfici esterne con un panno morbido leggermente inumidito.
Lavare tutti gli accessori e pulire l’interno del forno con del detergente per piatti ed acqua calda. Verificare che il forno sia vuoto, impostare la temperatura
massima e lasciarlo acceso per almeno 1 ora, così da rimuovere tutti gli odori normalmente presenti nei forni nuovi.
Griglia metallica
2
Sostiene teglie e piatti.
IT 18
NOTA: Per un corretto utilizzo del forno, si consiglia di non porre gli alimenti a diretto contatto con griglie e vassoi, ma di utilizzare carte forno e/o appositi
contenitori.
2
3
5
4
6
1
1
10
2
6
5
3
4
7
8
9
3. Utilizzo del Forno
3.1 Descrizione del display
ATTENZIONE: la prima operazione da eseguire dopo l’installazione o dopo una interruzione
di corrente (tali situazioni si riconoscono perchè sul dispay lampeggia l’ora 12:00 ) è la
regolazione dellora, come di seguito descritto. Il LED inferiore destro lampeggia
contemporaneamente ( ).
•Imposta l'ora con i tasti "- " "+".
Premere il pulsante Menu o attendere 5 secondi per l'impostazione dell'orologio.
ATTENZIONE: Il forno funzionerà solo impostando l'orologio
1. Manopola del termostato
2. Spia del termostato
3. Fine della cottura
4. Tempo di cottura
5. Visualizzazione della temperatura o dell'orologio
6. Controlli di regolazione del display LCD
7. Contaminuti
8. Impostazione dell'orologio
9. Lampada di segnalazione WiFi
10. Manopola selettore funzioni
FUNZIONE COME SI SPEGNE COSA FA
NOTA
COME SI ATTIVA
BLOCCO
BAMBINO
La funzione Sicurezza bambini viene
attivata con forno spento disattivando
Set (+) per almeno 5 secondi. Da questo
momento in poi tutte le altre funzioni
sono bloccate e il display lampeggerà a
intermittenza di intervalli di 3 secondi
STOP e tempo preimpostato.
• La funzione Child Lock è disattivata
c o n f o r n o s p e n t o , t o c c a n d o
nuovamente il touchpad Set (+) per
almeno 5 se condi . Da q ue sto
momento in poi tutte le funzioni sono
nuovamente selezionabili.
•Premere il tasto centrale 3 volta.
•Premere i tasti "- " "+" per regolare la
durata
•Lasciare i tasti
•Al termine della durata impostata
la funzione si spegne da sola ed
avvisa con un segnale sonoro il
segnale sonoro si ferma da solo; per
fermarlo subito premere il tasto.
•Da un segnale sonoro al termine di un
tempo stabilito
•Durante il funzionamento il display
visualizza il tempo rimanente.
•Permette di utilizzare il programmatore
del forno come una sveglia (può essere
usato con forno funzionante o spento.
Selezionare la funzione di cottura
con la manopola delle funzioni del
forno e la temperatura di cottura con
la manopola del termostato.
•Premere il tasto centrale 1 volte
•Premere i tasti "- " "+" per regolare
la durata
•Lasciare i tasti
•Selezionare la funzione di cottura
con la manopola commutatore
NOTA: se il forno viene spento o la
l a m p a d a è i n f u n z i o n e , l a
programmazione del tempo di
cottura non funziona.
•Permette di impostare la durata della
cottura del cibo inserito nel forno
•Per visualizzare il tempo rimanente
premere il tasto SELECT.
•Per modificare il tempo rimanente
premere il tasto SELECT +"- " "+"
Per interrompere il segnale
premere un tasto qualsiasi.
Premere il tasto centrale per tornare
alla funzione orologio.
• Alla fine del programma vengono emessi
3 segnali di avviso e il display visualizza End.
Per ripristinare la funzione orologio,
impostare a "0" il selettore delle funzioni.
•All’ora impostata il forno si spegne
da solo; se deve essere fermato
prima è necessario portare la
m a n o p o l a c o m m u t a t o r e i n
posizione O.
•Permette di memorizzare l’ora di
fine cottura
•Per visualizzare l’ora programmata
premere il tasto centrale 3 volte
•Per modificare l’ora programmata
premere i tasti SELECT + "- " "+"
Selezionare la funzione di cottura
con la manopola delle funzioni del
forno e la temperatura di cottura con
la manopola del termostato.
•Premere il tasto centrale 2 volte
•Premere i tasti "- " "+" per regolare
l’ora di fine cottura
•Lasciare i tasti
•Selezionare la funzione di cottura
con la manopola commutatore
NOTA: se il forno viene spento o la
l a m p a d a è i n f u n z i o n e , l a
programmazione del tempo di
cottura non funziona.
•Tipicamente si utilizza questa funzione
con la funzione DURATA COTTURA–ad
esempio il cibo desiderato deve cuocere
per 45 minuti e desidero che sia pronto per
le ore 12:30; in tal caso:
•Al termine della durata impostata il forno
si spegne automaticamente ed avvisa con
un segnale sonoro.
Selezionare la funzione di cottura
desiderata Impostare la durata cottura a
45 minuti ( "- " "+") Impostare la fine
cottura alle ore 12:30 ( "- " "+" ) La cottura
avrà auto-maticamente inizio alle 11:45
(12:30 meno 45 minuti), all’ora impostata
come fine cottura il forno si spegne
a u t o m a t i c a m e n t e .
ATTENZIONE: impostando solo la fine
cottura e non la durata della cottura, il
forno si accenderà subito e si spegnerà
all’ora di fine cottura impostata.
FINE
COTTURA
DURATA
COTTURA
CONTAMINUTI
IT 19
1. Selezione programma / 2. Durata programma / 3. Impostazione inizio cottura / 4. Selezione stoviglie dedicate / 5. Assistente vocale e offline /
6. Consigli, suggerimenti e manuale utente online
1 2
3 4
6
5
FUNZIONE WIFI ZERO ELETTRONICA
Per informazioni dettagliate sul collegamento tra l'app e il prodotto, fare riferimento alla Guida rapida.
La Guida rapida è disponibile su: go.candy-group.com/candy-ov .
WiFi ha due diverse posizioni sul selettore della cottura:
Attivazione WiFi: la funzione WiFi si attiva solo se il forno è già registrato sul dispositivo. In questa posizione, il forno sarà
controllato solo da remoto.
Reset WiFi: lasciando il selettore nella posizione di reset WiFi per 30 secondi, si attiva la funzione Bluetooth che consente di
registrare il forno sul dispositivo entro 5 minuti.
Se la registrazione avviene correttamente, il forno sarà controllato da remoto e l'icona WiFi si accenderà. Se la registrazione non
avviene correttamente, la funzione WiFi si disattiverà e verrà eseguito il reset del forno.
Per procedere con una nuova registrazione, ruotare il selettore del programma di cottura nella posizione di reset WiFi e ripristinare
la posizione.
Nota: installare l'app sul dispositivo prima di avviare la registrazione
Nota: sul dispositivo in cui è installata l'app è necessario attivare la funzione Bluetooth
Nota: per entrambe le posizioni WiFi i pulsanti tattili non funzionano.
Nota: è importante che il segnale WiFi tra il router domestico e l'elettrodomestico sia potente. Quando il forno tenta di collegarsi al
router, l'icona lampeggia rimanendo accesa per 3 secondi e spenta per 1 secondo; se è già collegato, l'icona si accende.
CANDY SIMPLY-FI:
per informazioni dettagliate sulla MODALITÀ DI CONNESSIONE all'elettrodomestico Simply-Fi e per
ottimizzare l'UTILIZZO, accedere a http://www.candysimplyfi.com
IT 20
PARAMETRI WIRELESS
Bluetooth v4.2
2,412 GHz. – 2,484 GHz
Velocità dei dati di base:
Potenza di trasmissione RF (tipo):
+4 dBm
Velocità dei dati aumentati:
Potenza di trasmissione RF (tipo):
+2 dBm
BLE:
Potenza di trasmissione RF (tipo):
+7,5 dBm
802.11 b/g/n
2,412 GHz. – 2,484 GHz
802.11b. DSSS 1 Mbps=
+19.5 dBm
802.11b. CCK 11 Mbps=
+18.5 dBm
802.11g. OFDM 54 Mbps=
+18.5 dBm
802.11n. MCS7=
+14 dBm
802.11b =1024 bytes,
-80 dBm
802.11g =1024 bytes,
-70 dBm
802.11n =1024 bytes,
-65 dBm
802.11n HT40 =1024 bytes,
-65 dBm
Standard Wireless
Range di frequenze
Potenza massima di
trasmissione
Sensibilità minima di
ricezione
Parametro
Specifications
(Wi-Fi)
Specifications
(Bluetooth)
Velocità dei dati di base:
Sensibilità a 0,1% BER:
-98 dBm
Velocità dei dati aumentati:
Sensibilità a 001% BER:
-98 dBm
BLE:
Sensibilità a 0,1% BER:
-98 dBm
Informazioni sui prodotti per apparecchiature collegate in rete
Consumo energetico del prodotto in
standby di rete se tutte le porte di rete
cablate sono collegate e tutte le porte di
rete wireless sono attive:
2,0 W
Come attivare la porta di rete wireless:
Partendo da un forno non registrato, mettere
la manopola destra sulla posizione di Reset. Il
modulo Wi-Fi si accende dopo 30".
Se il forno è registrato con Wi-Fi spento,
mettendo la manopola destra sulla posizione
Wi-Fi il modulo Wi-Fi è acceso.
Come disattivare la porta di rete wireless:
Se il forno è registrato, mettendo la
manopola destra sulla posizione di Reset il
modulo Wi-Fi si spegne.
Guida Rapida Candy OVEN - Registrazione su App
Procedura per dispositivi con Bluetooth 4.0 (o superiore)
IMPORTANTE
Questa guida rapida illustra i passaggi da seguire per arruolare il proprio
elettrodomestico sull'App Candy simply-Fi, utilizzando un dispositivo
dotato di tecnologia Bluetooth 4.0 (o superiore). In tal caso, la procedura
risulta semplificata e più veloce (Easy Enrollment).
Se stai utilizzando un dispositivo senza tecnologia Bluetooth (o con
versione inferiore alla 4.0), segui la procedura descritta sul retro.
STEP 1
Annota il numero seriale del prodotto
Recupera il nome e la password WPA/WEP della tua rete Wi-Fi domestica,
solitamente posti sul retro del router.
NOTA
La frequenza della rete Wi-Fi domestica deve essere impostata sulla
banda a 2,4 Ghz. Non è possibile configurare l'elettrodomestico se la rete di
casa è impostata sulla banda a 5 GHz.
Se dovessi avere problemi nel trovare la password WPA/WEP, contatta il
tuo fornitore internet.
Assicurati che il tuo smartphone/tablet sia collegato alla medesima rete
Wi-Fi e di aver attivato il Bluetooth all'interno delle “Impostazioni”.
Consultare il relativo manuale per maggiori dettagli.
STEP 2
Scarica l'App Candy simply-Fi dallo store.
Apri l'App Candy simply-Fi e crea il tuo profilo utente facendo tap su
“Registrati”. Accetta l'informativa sulla privacy e completa i campi.
NOTA
L'App è disponibile per dispositivi Android (dalla versione 4.4) e iOS (dalla
versione 8).
Se hai già creato un profilo utente Candy simply-Fi, fai login utilizzando le
tue credenziali.
STEP 3
Nella homepage dell'App, fai tap sull'icona con le tre barre in alto a
sinistra per accedere al tuo profilo utente, quindi premi su ASSOCIA UN
NUOVO ELETTRODOMESTICO” e seleziona il nome del prodotto che vuoi
registrare.
STEP 4
Inserisci la data di acquisto del tuo prodotto (GG/MM/AAAA), quindi fai
tap su “Procedi”.
STEP 5
Inserisci le 16 cifre del numero seriale oppure scansiona il QR code
presente sull'elettrodomestico. Fai tap su Avanti”. Controlla la correttezza
dei dati e fai tap su “Conferma”. Una volta che il sistema ha riconosciuto il
prodotto, fai tap su Avanti.
1 / 1

Candy FCDIEN528X WF Manuale utente

Categoria
Forni
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue