Sentiotec Pro D Manuale utente

Tipo
Manuale utente
EN
DE
FR
IT
NL
SV
FI
INSTRUCTIONS FOR INSTALLATION AND USE
English
Version 09/23 ID no. 1-041-284
Sauna control unit
Pro D
Pro D2 1-041-288 / PRO-D2
Pro D2 white 1-041-290 / PRO-D2W
D2i 1-041-291 / PRO-D2I
Pro D2i white 1-041-292 / PRO-D2IW
Pro D3 1-041-293 / PRO-D3
Pro D3 white 1-041-294 / PRO-D3W
Pro D3i 1-041-295 / PRO-D3I
Pro D3i white 1-041-296 / PRO-D3IW
Table of Contents
1. About this instruction manual 5
2. Important information for your safety 6
2.1. Intended use 6
2.2. Safety information for the installer 7
2.3. Safety information for the user 8
3. Product description 9
3.1. Scope of delivery 9
3.2. Optional accessories 9
3.3. Product features 10
3.4. Sauna operating modes 12
3.5. Sensor operating modes 12
4. Installation 14
4.1. Installing the power supply unit 14
4.2. Installing the control panel 16
4.3. Installing the heater sensor F1 with overheat cut-out 19
4.4. Installing the bench sensor F2 (optional) 19
4.5. Installing humidity/temperature sensor FTS2 (optional, Pro D3 / Pro
D3i only) 20
4.6. Installing foil sensor FTS2 (optional, Pro D2i / Pro D3i only) 20
5. Electrical connection 21
5.1. Connecting the power supply cable, heater and vaporizer 22
5.2. Connecting the control panel 22
5.3. Connecting the light 22
5.4. Connecting a fan (optional) 23
5.5. Connecting an additional output (optional, Pro D2i / Pro D3i only) 23
5.6. Connecting the power booster (optional) 24
5.7. Connecting the heater sensor F1 24
5.8. Installing bench sensor F2 (optional) 24
5.9. Connecting the humidity/temperature sensor FTS2
(optional, Pro D3 / Pro D3i only) 25
5.10. Connecting the foil sensor (optional, Pro D2i / Pro D3i only) 25
5.11. Connectingthesafetyshut-o/doorsensor 26
EN
5.12. Remote start 26
5.13. Status output 26
5.14. Finishing the installation 26
6. Testing 27
7. Connection diagram 28
8. Commissioning 29
8.1. Setting the function selection switch 29
8.2. Settings in the technician menu 31
9. Controls 38
9.1. Control panel Pro D2 38
9.2. Control panel Pro D2i 38
9.3. Control panel Pro D3 39
9.4. Control panel Pro D3i 39
9.5. Additional output control panel Pro D (optional) 40
9.6. Power unit 40
10. Operation 41
10.1. Switching on the light on the power unit (cleaning lights) 41
10.2. Switching on the power unit 41
10.3. Activating the control panel 42
10.4. Additional output control panel Pro D (optional) 42
10.5. Starting sauna mode 43
10.6. Switchingosaunamode 43
10.7. Starting combi mode (Pro D3 / Pro D3i only) 43
10.8. Switchingocombimode(ProD3/ProD3ionly) 44
10.9. Starting additional output (Pro D2i / Pro D3i only) 45
10.10.Switchingoadditionaloutput(ProD2i/ProD3ionly) 47
10.11. Switching on the light 48
10.12.Switchingothelight 48
10.13. Starting the fan 49
10.14.Switchingofan 49
10.15. Setting the preset time 50
10.16. Cancelling the preset time feature 50
10.17. Setting the duration 51
10.18. Cancelling the post-drying program (Pro D3 / Pro D3i only) 51
10.19. Activating standby for remote operation 52
10.20.Switchingofunctions 53
10.21. Deactivating the control panel 53
10.22.Switchingothepowerunit 53
11. User programs 54
11.1. Preset user programs 54
11.2. Accessing user programs 54
11.3. Creating your own user programs 55
12. The Eco-function 56
13. Cleaning and maintenance 57
13.1. Cleaning 57
13.2. Maintenance 57
14. Disposal 57
15. Troubleshooting 58
15.1. Error messages 58
15.2. Low-water display (Pro D3 / Pro D3i only) 59
15.3. Fuses 59
16. Technical data 60
16.1. Power unit 60
16.2. Control panel Pro D2 / Pro D2i / Pro D3 / Pro D3i 61
16.3. Additional output control panel Pro D (optional) 61
EN
Instructions for installation and use p. 5/31
1. About this instruction manual
Read these installation and operating instructions carefully and keep them within
reach of the sauna control unit. This ensures that you can refer to information on
safety and operation at any time.
Symbols used for warning notices
In these instructions for installation and use, a warning notice located next to
an activity indicates that this activity poses a risk. Always observe the warning
notices. This prevents damage to property and injuries, which in the worst case
may be fatal.
The warning notices contain keywords, which have the following meanings:
DANGER!
Serious or fatal injury will occur if this warning notice is not observed.
WARNING!
Serious or fatal injury can occur if this warning notice is not observed.
CAUTION!
Minor injuries can occur if this warning notice is not observed.
ATTENTION!
This keyword is a warning that damage to property can occur.
Other symbols
This symbol indicates tips and useful information.
These installation and operating instructions can also be found in the
downloads section of our website: www.sentiotec.com/downloads.
Instructions for installation and use p. 6/31
2. Important information for your safety
The sauna control units of the Pro D series have been produced
in accordance with the applicable safety rules and regulations.
However, hazards may arise during use. Therefore adhere to the
followingsafetyinformationandthespecicwarningnoticesin
the individual chapters. Also observe the safety information for the
devices connected.
2.1. Intended use
The sauna control units of the Pro D series are used exclusively for
operating and controlling the sauna functions in accordance with
the technical data.
The sauna control units of the Pro D series may only be used for
operatingandcontrollingasaunaheaterwhichhasbeencertied
as satisfying the combustion test described in paragraph 19.101 of
EN 60335-2-53. If the heater does not meet this requirement, an
appropriate safety precaution must be taken (for example: safety
shut-o/doorsensor,see5.11onpage26).
The sauna control units of the Pro D series may only be used for
operating and controlling 3 heating circuits with a maximum heat-
ing capacity of 3.5 kW per heating circuit. The maximum vaporizer
output is 3.5 kW. The maximum additional output totals 3.5 kW.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, severe injuries or death.
EN
Instructions for installation and use p. 7/31
2.2. Safety information for the installer
Installationmayonlybeperformedbyaqualiedelectricianor
similarlyqualiedperson.
Work on the sauna control unit may only be performed when the
power has been disconnected.
A fully disconnecting all-pole isolating device compliant with
overvoltagecategoryIIImustbettedonsite.
The sauna control unit must be installed outside the sauna cabin
at a height of approx. 1.70 m or in accordance with the rec-
ommendation issued by the sauna manufacturer. The ambient
temperature must be within a range spanning -10 °C to +40 °C.
The heater sensor must be installed in such a way that it is not
aectedbyinowingair.
The heater supply cable must have a minimum cross-sectional
area of 2.5 mm2 and be temperature-resistant up to 150 °C.
Also comply with the regulations applicable at the installation
location.
For your own safety, consult your supplier in the event of prob-
lemsthatarenotexplainedinsucientdetailintheinstallation
instructions.
Instructions for installation and use p. 8/31
2.3. Safety information for the user
The sauna control unit must not be used by children under 8 years
of age.
The sauna control unit may be used by children over 8 years of
age, by persons with limited psychological, sensory or mental
capabilities or by persons with lack of experience/knowledge,
but only if:
They are supervised.
They have been shown how to use the device safely and
are aware of the hazards that could occur.
Children must not play with the sauna control unit.
Children under 14 years of age may only clean the sauna control
unit if they are supervised.
● Forhealthreasons,donotusethesaunawhenundertheinu-
ence of alcohol, medication or drugs.
● Makesurethatnoammableobjectshavebeenplacedonthe
sauna heater before the sauna control unit is switched on.
● Makesurethatnoammableobjectshavebeenplacedonthe
sauna heater before activating the preset time function or the
standby mode for remote start.
Makesurethatnoammableobjectshavebeenplacedonor
in front of the infrared heater before the sauna control unit is
switched on.
Makesurethatnoammableobjectshavebeenplacedonor
in front of the infrared heater before activating the preset time
function or the stand-by mode for the remote start.
For your own safety, consult your supplier in the event of prob-
lemsthatarenotdescribedinsucientdetailintheoperating
instructions.
EN
Instructions for installation and use p. 9/31
3. Product description
3.1. Scope of delivery
Control panel (depending on version Pro D2 / D2i / D3 / D3i)
Power unit
Heater sensor with integrated overheat cut-out
Sensor cables
Installation material
Wire jumper for bridging terminals V1 and Wm for combi heaters without
low-watershut-o
3.2. Optional accessories
Bench sensor (1-009-231 / O-F2)
Humidity/temperature sensor (1-010-081 / O-FTS2)
Foil sensor (1-014-445 / P-ISX-FF)
Power booster (1-008-779 / O-S2-18, 1-009-280 / O-S2-30)
Safety shutdown (SFE-xxxxx)
Home door sensor (1-052-723 / SAB00103)
Control panel Pro D2 (1-040-159/PRO-D2-CU)
Control panel Pro D2 white (1-040-161 / PRO-D2W-CU)
Control panel Pro D2i (1-040-163 / PRO-D2I-CU)
Control panel Pro D2i white (1-040-165 / PRO-D2IW-CU)
Control panel Pro D3 (1-040-167 / PRO-D3-CU)
Control panel Pro D3 white (1-040-169 / PRO-D3W-CU)
Control panel Pro D3i (1-1040-173 / PRO-D3I-CU)
Control panel Pro D3i white (1-1-040-173 /PRO-D3IW-CU)
Additional output control panel Pro D (1-040-174 / PRO-DA-CU)
Additional output control panel Pro D white (1-040-175 / PRO-DAW-CU)
Pro D BUS converter RS485 (1-053-348 / BUS-CON-D)
● MySentioWi(1-053-313/S-WIFI01)
MySentio Remote (1-053-314 / S-WIFI02)
Instructions for installation and use p. 10/31
3.3. Product features
Pro D2 / Pro D2 white
The sauna control unit Pro D2 / Pro D2 white features the following functions:
Regulation of sauna heaters with a heating output of up to 10.5 kW in the
temperature range spanning 30 °C to 110 °C.
A power booster allows the maximum switching capacity to be increased from
10.5 kW to 18 kW or 30 kW.
Optional dimming or switching of a cabin light (up to 100 W)
Optional modulation or switching of a fan (up to 100 W)
Remote start function
Door monitoring system
Status output
Preset time function
The maximum heating period can be set to 6 h, 12 h, 18 h or 24 h.
User programs
The user programs enable favourite sauna settings to be saved and accessed
again.Thereare5presetuserprogramsavailablewhichcanbemodied
according to user requirements.
Automatic heating time limit
The sauna control unit shuts down automatically after the maximum heating
time for safety reasons. The maximum heating period can be set to 6 h, 12 h,
18 h or 24 h.
Overheat cut-out
The overheat cut-out is installed in the housing for the heater sensor. If a
defect causes the sauna heater to continue heating after reaching the pre-
ferredtemperature,theoverheatcut-outswitchesthesaunaheateroata
temperature of around 139 °C.
PRO D3 / PRO D3 white
Same functional scope as the Pro D2 / Pro D2 white, with the following additional
features:
Regulation of combi-model sauna heaters with a heating output of up to 10.5 kW
and vaporizer output of up to 3.5 kW in the temperature range spanning 30 °C
to 110 °C and a humidity range spanning 0% to 100%.
Post-drying program
After operation in combined mode, the post-drying program starts automat-
ically to prevent mould or rot from forming in the sauna cabin. This involves
heating the sauna cabin to 80°C with the fan running.
The duration can be set from OFF - 60 minutes.
EN
Instructions for installation and use p. 11/31
PRO D2i / PRO D2i white / PRO D3i / PRO D3i white
Same functional scope as the Pro D2 / Pro D2 white and the PRO D3 / PRO D3
white, with the following additional features:
Auxiliary output
Either for dimming (up to 500 W), switching (up to 3.5 kW) or regulating the
sauna cabin temperature via the additional output.
The additional output has no overheat cut-out. For this reason, only intrinsically
safe devices should be operated using the additional output.
If infrared heaters are connected to the additional output, they must have
an overheat cut-out. We recommend using the following infrared heaters:
1-027-780 / DIR-350-R, 1-027-845 / WIR-350-R, 1-027-781 / DIR-500-R,
1-027-846 / WIR-500-R, 1-027-782 / DIR-750-R, 1-027-847 / WIR-750-R,
1-027-779 / DIR-1300-R
1-027-785 / ECO-350-R, 1-027-784 / ECO-350-G, 1-027-788 / ECO-
500-R, 1-027-787 / ECO-500-G, 1-027-790 / ECO-750-R
If one of the following infrared heating plates is connected to an additional
output, the foil sensor 1-014-445 / P-ISX-FF must be used and activated
on the technician menu (see “Activating/deactivating the foil sensor
(Pro D2i / Pro D3i only)” on page 32):
1-028-348 / IR-WP-100, 1-028-343 / IR-WP-175, 1-028-784 / IR-WP-390,
1-028-938 / IR-WP-510
1-028-149 / IR-WPHL-100, 1-028-941 / IR-WPHL-175, 1-028-601 / IR-
WPHL-390, 1-027-885 / IR-WPHL-510
Sauna mode
Combi operating mode
Auxiliary output
Light
Fan
Preset time
User programs
Pro D2 (white) X X X X X
Pro D2i (white) X X X X X X
Pro D3 (white) X X X X X X
Pro D3i (white) X X X X X X X
Fig.1 Overview of Pro D functions
Instructions for installation and use p. 12/31
3.4. Sauna operating modes
The sauna control unit Pro D2 / Pro D2i enables sauna mode. The sauna control
unit Pro D3 / Pro D3i enables two operating modes, sauna mode and combi mode.
Sauna mode
Dry heat is provided in sauna mode. The temperature in the cabin is high (80 to
100°C). The humidity is low (no more than 10%).
Combi mode
In combined mode, the vaporizer operates along with the heater. The temper-
ature in the sauna cabin is lower (around 40 to 65 °C) than in sauna mode, but
the relative humidity is much higher, ranging from 35% to 70%. The maximum
humidity that can be set depends on the temperature of the sauna. The higher
the sauna temperature, the lower the maximum humidity level which can be set
(see characteristic curve on page 13).
3.5. Sensor operating modes
The sauna control units of the Pro D series can be operated with one or two sen-
sors. A temperature sensor (bench sensor F2) or a humidity/temperature sensor
(FTS2, Pro D3 / Pro D3i only) can be used as the second sensor.
Single sensor mode (F1)
Single sensor mode is the factory setting.
In single-sensor mode, the sauna control unit is operated with the heater sensor
with overheat cut-out (F1) only. This is included in the scope of delivery.
The sauna control unit displays the actual temperature by default. The set tem-
perature is displayed during setting. If it is to be permanently displayed it must be
activated during commissioning (see “Temperature/humidity display (actual/
set value)” on page 31)
The maximum humidity level (only Pro D3 / Pro D3i) which can be set in sin-
gle-sensor mode is based on the temperature above the heater and the humidity
is timed. Only the setpoint for the humidity (in % relative humidity) is shown on
the display of sauna control unit. The actual humidity in the sauna cabin when
the humidity is timed depends on the size of the cabin and the vaporizer output,
andmaydierfromthesetpoint.
EN
Instructions for installation and use p. 13/31
Two-sensor mode with bench sensor (F2)
Two-sensor mode must be activated using the function selection switch
(see “Remote start release” on page 30).
In two-sensor mode with bench sensor, a second temperature sensor (bench
sensor) is installed above the rear sauna bench. The sauna control unit displays
the temperature measured by the bench sensor as the actual temperature.
In two-sensor mode with bench sensor, the humidity (Pro D3 / Pro D3i only) is
timed. Only the setpoint for the humidity (in % relative humidity) is shown on the
display of the sauna control unit. The actual humidity in the sauna cabin when
the humidity is timed depends on the size of the cabin and the vaporizer output,
andmaydierfromthesetpoint.
Two-sensor mode with humidity/temperature sensor (FTS2, Pro D3 / Pro
D3i only)
Two-sensor mode must be activated using the function selection switch
(see “Remote start release” on page 30).
When a humidity/temperature sensor is used in two-sensor mode, the sauna
control unit displays the temperature which is measured by the humidity/tem-
perature sensor as the actual temperature.
In two-sensor mode with humidity/temperature sensor, the vaporizer is regulated
in accordance with the humidity level measured in the sauna cabin. The sauna
control unit displays the actual humidity (in % relative humidity) in the sauna cabin.
Temperature °C
Relative humidity %
EN 60335-2-53:2011; characteristic temperature / relative humidity for proper use.
Installation instructions, only for experts p. 14/31
4. Installation
4.1. Installing the power supply unit
Observe the following points when installing the sauna control unit:
The power unit of the sauna control unit must be installed outside the sauna
cabin or in accordance with the recommendation issued by the sauna man-
ufacturer.
The ambient temperature must be within a range spanning -10°C to +40°C.
The sensors may only be connected using the sensor cables supplied with
the unit, which are heat-resistant up to 150°C.
ATTENTION!
Damage to the unit
The sauna control unit is resistant to splashing water, but direct contact with
water could still damage it.
Install the sauna control unit in a dry place at which a maximum humidity of
95% is not exceeded.
The sensor leads may be extended under the following conditions:
A silicon cable resistant to temperatures up to 150 °C is used.
The minimum cross-sectional of the cable is 0.5 mm2.
The heater sensor cables may NOT be longer than 10 m.
ATTENTION!
Interference can impair signal transmission
Route all sensor cables separately from other mains cables and control cables.
Protect cables with only one layer of insulation by using a conduit (double
insulation).
EN
Installation instructions, only for experts p. 15/31
Fig.2 Position of the attachment device and the installation holes
(dimensions in mm)
C
To install the sauna control unit, perform the following steps:
1. Screw two cross-head screws (16 mm) into the wall of the sauna at a height
of approx. 1.70 m and leaving a protruding length of 7 mm. The two screws
must be placed at a distance of 145 mm from each other (see Fig.2).
2. Press the clip locks C in lightly using a screwdriver and remove the cover
from the housing (see Fig.3).
3. Fasten the sauna control unit onto the cross-head screws using attachment
device A as an aid (see Fig.2).
4. Screw two cross-head screws (16 mm) into the lower fastening holes B
(see Fig.2).
82
80
34
175
145
34
43
40
A
B
Fig.3 Removing the cover from the housing
Installation instructions, only for experts p. 16/31
4.2. Installing the control panel
The control panel 2 is installed on the cabin wall at a maximum distance of 10
metres from the power unit 1 (see Fig.4).
For the installation, a standard jigsaw is required to cut out the recess for the
control panel. The control panel can be installed both inside and outside the cabin.
*For installation inside a sauna cabin, maintain a minimum distance of 30 cm to
the ceiling. (see Fig.4).
ATTENTION!
Damage to the unit
The control panel 2 of the sauna control unit is splash-proof (protection
class IP IPX4).
Work on the control panel may only be carried out using a standard screw-
driver. Using a cordless screwdriver may irreparably damage the housing.
Power unit External view
Control
panel
1
2
Fig.4 Control panel position
* when installed inside the cabin
min. 30 cm *
EN
Installation instructions, only for experts p. 17/31
1. Cut out the 70 x 65 or 60 x 48 mm recess using a jigsaw, for example (see Fig.5
and Fig.6).
2. Provide cable guides for the connecting cables.
3. Screw the housing to the cabin wall through the hole with the 4 or 2 wood
screws enclosed.
Fig.5 Installing the Pro D control panel
65
70
20
20
5
35
Fig.6 Installing the control panel additional output (optional)
06
48
35
20
20
3
Installation instructions, only for experts p. 18/31
4. The front panel of the control panel is inserted with slight pressure into the
housing. Ensure that the lower catches engage noticeably.
Fig.8
Installing the control panel
5. Connect the 4-pin plug to the RJ11 socket on the control panel.
1 Heater sensor half-shells
2 Connection panel
3 Cross-head screws (9 mm)
4 Heater sensor
5 Heater sensor leads
6 Wood screws (16 mm)
Fig.7
Installing the heater
sensor
Red
White
White
Red
EN
Installation instructions, only for experts p. 19/31
4.3. Installing the heater sensor F1 with overheat cut-out
Note the following points when installing the heater sensor:
The heater sensor must be installed on the rear of the heater, above the
middle of the sauna heater. A distance of about 15 cm from the ceiling of the
cabin must be maintained.
Theheatersensormustbeinstalledinsuchawaythatitisnotaectedby
inowingair.
To install the heater sensor, perform the following steps (see Fig.8):
1. Route the two 2-pole heater sensor cables in the wall of the sauna cabin
totheinstallationlocationoftheheatersensorandaxtheheatersensor
cables using cable clips.
2. Pull the two half-shells 1 of the heater sensor apart.
3. Connect the four connections for the heater sensor cable 5 in accordance
with the Fig.8.
4. Place the connection panel 2 crossways (as shown in Fig.8) in the heater
sensor half-shells.
5. Place the two half-shells together, screw them together using two cross-
head screws 3 (9 mm) and check whether the heater sensor has been
securely closed.
6. Install the heater sensor on the rear of the heater using the two wood screws
6 supplied (16 mm).
4.4. Installing the bench sensor F2 (optional)
The bench sensor must be installed on the wall of the cabin above the rear bench
seat. A distance of about 15 cm from the ceiling of the cabin must be maintained.
To install the bench sensor, carry out the following steps:
1. Route the 2-pole bench sensor lead in the wall of the sauna cabin to the
mountinglocationofthebenchsensorandaxthebenchsensorleads
using cable clips.
2. Connect the two connections for the bench sensor cable to the two middle
terminals on the connection panel.
3. Install the bench sensor on the wall of the sauna cabin using the two supplied
wood screws (16 mm).
Installation instructions, only for experts p. 20/31
4.5. Installing humidity/temperature sensor FTS2 (optional, Pro
D3 / Pro D3i only)
The humidity/temperature sensor must be installed on the wall of the cabin above
the rear bench seat. A distance of approx. 15 cm from the ceiling of the cabin
must be maintained.
To install the humidity and temperature sensor, perform the following steps:
1. Route the 5-pole sensor cable in the wall of the sauna cabin to the mount-
ingpositionofthehumidity/temperaturesensorandaxthesensorleads
using cable clips.
2. Install the humidity/temperature sensor to the wall of the sauna cabin using
the two supplied wood screws (16 mm). Maintain a clearance of 15 cm to
the roof of the sauna cabin.
4.6. Installing foil sensor FTS2 (optional, Pro D2i / Pro D3i only)
If one or more infrared heating plates is connected to the additional output, the
foil sensor 1-014-445 / P-ISX-FF must be used:
When installing and positioning the foil sensor, observe the operating instruc-
tions for the infrared heating plates.
Use of a foil sensor must be activated in the technician menu (see “Activating/
deactivating the foil sensor (Pro D2i / Pro D3i only)” on page 32).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436

Sentiotec Pro D Manuale utente

Tipo
Manuale utente