Haier HB22FWRSSAA Instructions For Use Manual

HB22FWRSSAA

Table of contents

The appearance, color, design of the refrigerator

may vary from the actual product

Product Features ...................................................................... 1

Name of Components............................................................... 2

Safety Notice ......................................................................... 3-6

Disassembly and Assembly of Door ...................................... 7-8

Preparation ............................................................................ 8-9

Connecting the Water Supply Line ......................................... 10

Getting Started ........................................................................11

Product Function ............................................................... 12-14

How to save energy ................................................................ 15

About Refrigerating Chamber ............................................ 15-16

Precautions for Refrigerating Food......................................... 17

Smart Use of Refrigerating Chamber ..................................... 18

About Freezing Chamber .................................................. 18-19

Usage of Ice Maker and the Cold Water Dispenser ............... 20

How to Use the Water Dispenser ........................................... 21

Water Dispenser Precautions ................................................. 21

Cleaning and Disuse ......................................................... 22-25

Suspension ............................................................................. 25

Cleaning and Disuse .............................................................. 26

FAQ (stange voice in refrigerator) .....................................27

-

28

Safety instructions ............................................................. 29-30

z

Please read this Operation Manual carefully before using the appliance.

z

Keep this Manual for future reference.

z

See the physical object for the appearance, color and the door pattern.

1

Product Features

Ice-making function

Manual ice maker can satisfy user's different need for ice.

Full width shelf design, more convenience for storing and

taking food.

Fuzzy Function

The refrigerator can be automatically adjusted to the best refrigerating condition

according to the chamber temperature and ambient temperature without human

intervenes.

Super large and super luxurious design

The refrigerator has super large capacity, super large refrigerating and freezing

chamber, as well as super luxurious inter design.

Fluoride-free, frostless, complete air cooling refrigeration, deep

cooling, and rapid freezing.

Defrost and pre-refrigeration

The refrigerator will make judgment on the temperature in the refrigerator before

defrosting, and the compressor will automatically and rapidly refrigerate after

defrosting.

Equipped with condensing unit, heat dissipation by blower,

better refrigeration effect, and long service life of

compressor.

Open door alarm, touch-sensitive button, large-screen LED

display.

Drawers have track way. It can be pushed and pulled smoothly.

Deodorant Brick

It separates the refrigerating chamber and freezing chamber, avoiding tainting.

2

Name of Components

Refrigerating Chamber

Freezing Chamber

Refr. Light

Diary Box

Refr. Shelf

Wine Rack

Gallon Bottle

Seat

Crisper

Full Wid.

Drawer Cover

Full Wid.

Drawer

Ice Maker

Ice Cover

Freezer Smal

Drawer

Handle

Drawer Shel

Board

Freezer Large

Drawer

Decoration

Strip

Gallon Bottle

Seat

Vertical Beam

Crisper Cover

3

Safety Notice

Dear user,

Thank you for using haier Refrigerator! For your better understandingof the

instructionand better use of the product, we explain the signs appeared in the

instruction as follow:

Prohibit

All action with this sign is prohibited; it may cause product damages or

endanger the personal safety of users.

Warning

All action with this sign is related to the safe use of products and the

personal safety of users. Operation must follow the requirement strictly;

otherwise it may cause product damages or endanger the personal safety

of users.

Caution

Any action with this sign shall be paid more attention. Otherwiseit will

cause product damages and other damages due to improper operation.

The refrigerator use AC 220-240V/50Hz

power supply.

If the voltage variation is large (greater than

187-242V), it may cause the refrigerator fail

to start, and the master control board and

compressorwill burn out, or compressor has

abnormal noise. At this time, auto stabilizer of

750W or above must be added.

Independent dedicated socket must be

used and reliably grounded.

The power cord of the refrigerator has three-

pin plug (for grounding) which complies with

standard. In no circumstances the third pin

of the power cord for grounding sail be cut or

dismantled. After the refrigeratoris installed,

the plug shall be accessible to facilitate plug

in and out.

Warning! The plug of power cord shall be

attached rmly with the socket; otherwise it

may cause a re

When the power cord is damaged

When the power cord is damaged or the plug

is worn, do not use. The worn or damaged

power cord must be replaced at the specied

maintenance provider by the manufacturer.

Detach the power plug when:

1. Before cleaning and maintenance, please

detach the power plug of the refrigerator.

2. When replacing damaged lighting devices,

the power plug of the refrigerator shall be

detached to prevent electric shock.

4

Safety Notice

Do not damage the power cord

1. Do not pull the power cord to disconnect

the plug of refrigerator. The plug shall be hold

tightly and directly detached from the socket.

2. The body of refrigerator shall not press on

the power cord and do NOT stamp on the

power cord.

3. Please be careful when moving the

refrigerator from the wall, do not press or

damage the power cord.

It Is recommended not to place appliance

such as power socket, regulated power

supply, microwave oven on the refrigerator,

and do not use electrical appliances Inside

the refrigerator to avoid electromagnetic

interference or other accident.

Do not store or use gasoline or other

combustibles around the pump to avoid re.

When ammable gas such as natural

gas leaks

1. Close the valve which leaks the gas,

2. Open house door and window,

3. Do not unplug/plug the power plug of

refrigerator or other electrical appliance.

Never sit on the bottle seat inside the

refrigerator door to avoid the door tiles or the

bottle seat damages, and the refrigerator falls

to hurt people;when take in and out the food,

please do not stamp on the door of freezing

chamber and body of refrigerator. Do not sit

on the drawers to avoid therefrigerator falling

down to hurt people.

After the refrigerator is in operation, do

not touch the cold surface in the freezing

chamber, particularly when hands are damp

or wet. Skin may adhere to these extremely

cold surfaces.

5

Safety Notice

When open and close the door,the handle

shall be hold to open and close. The space

between the doors and between the doors

and the body Is small. Cautions shall be

made not to put your hands In these spaces

to avoid jam your ngers. When open and

close the doors, donot let children approach

to avoid hurt the children.

Do not use water to spray on or ush the

refrigerator, and do not place the refrigerator

at wet place or the place which is easy to

besplashed with water to avoid the impact

to the electric insulation performance of

therefrigerator.

The refrigerator shall be placed far from heat

source and avoid direct sunshine to prevent

from impact to performance.

Do not place the refrigerator at damp or

wet place and the place which is easy to be

splashed with water. The splashed water

and dirt shall be wiped out with soft cloth in a

timely manner to avoid rustiness and impact

to electric insulation.

Dismantle and alter the refrigerator is

prohibited, and the refrigerating pipeline shall

not be damaged. The maintenance of the

refrigerator must be carry out by professional

personnel.

When the refrigerator falls into disuse, please

remove the door, door seal, and shelves, and

place them in proper location to avoid children

entering into the refrigerator and causing

accident.

6

Safety Notice

Leveling Your Refrigerator

The Refrigerator shall be place on at and

solid ground. If it's necessary to block up

the refrigerator, at, sold, and nonammable

cushion block shall be used. Do not use

the package foam to block up. Adjustable

leveling legs can be adjusted by turning

them clockwise (as shown by the arrow) to

raise your refrigerator or by turning them

counterclockwise to lower your refrigerator if

your refrigerator is not leveled.

Door Alignment

If the two doors of refrigerating chamber is not

aligned, please align the doors as following:

1. Use one hand to raise the door at the hinge

in the middle.

2. The other hand insert a spacer with pliers,

as shown.

3. Insert remained spacers till the doors is

aligned. (3 cramp rings are provided with the

product)

Do not put bottled beer or drinks into the

freezing chamber to avoid frost cracking.

The refrigerator shall be placed in well-

ventilated place. Clearance of 10cm or above

shall be left around the refrigerator including

the back.

Never place combustibles, explosives,highly

corrosive acid/alkali in the refrigerator.

The product is household refrigerator.

According to the national standard, household

refrigerator is only suitable for food, cannot

be used for other purpose, such as storing

blood, chemicals, cosmetics, medicine, and

biological products.

Alignment

Leveling Leg

10cm or

above to

top

Distance

10cm

or above to

back

10cm or

above to left

and right

Flat Screwdriver

Mouse

Spray

Gas

Acid

Alkali

Bacteria

Vaccine

Chemical

agent

7

Disassembly and Assembly of Door

Caution

Before disassembling and assembling the doors, please remove food on

the bottle seat,and remove the bottle seat, and then cut the power, shutdown

the water source to avoid personal injury, product or property loss. When

install and dismantle the doors, please contact the servicer centre of Haier.

Prevent children or pets from asphyxia due to trap in the refrigerator.

Do not let them play in the drawer.

Refr. Right Door Disassembly and Assembly

1. Remove the screw which xes the upper

hinge cover with screwdriver, and then

remove the upper hinge cover.

3. Raise the right door and remove proper

location.

2. Remove the screw which xes the upper

right hinge with hex driver, and move

forward the upper right hinge and the door,

and then remove right upper hinge.

4. Middle hinge may be removed if necessary.

5. The door can be installed by reverse steps.

Refr. Left Door Disassembly and Assembly

1. Remove the screw which xes the upper

hinge cover with screwdriver, and then

remove the upper hinge cover.

2. Disconnect the wire terminal, and separate

the connectors on the upper right corner

at the back. Remove humidity sensor, and

then remove the screw with hex driver.

Move forward the hinge, water pipe, and

door, and then remove the upper left hinge.

8

Disassembly and Assembly of Door

Refr. Left Door Disassembly and Assembly

Preparation

1. Remove all package

Packing base and tapes that x accessories also must be removed.

2. Check out the accessories and materials

Check out the items in the box according to the packing list. If varies, please make

query to the seller.

3. Place your refrigerator into proper location

4. It is better to clean your refrigerator before use (see section leaning for details)

5. Standing

After leveling and cleaning, the refrigerator shall keep standing more than 6 hours

before connecting to power supply to ensure the normal running of the refrigerator.

3. Remove the left door and place It to proper

location.

4. Middle hinge may be removed if necessary.

5. The door can be installed by reverse steps.

Disassembly and Assembly of Ice Receiving Drawer

1. Pull the drawer to the maximum length at

rst, and then remove the drawer.

2. The Ice Receiving Drawer can be Install by

reverse steps.

1. Follow the direction of the arrow 1, pull

outthegearatthe horizontal station.

2. Follow the direction of the arrow2, bending

pole of gear, and then splited.

Disassembly and Assembly of Freezer Drawer

1. Pull the freezer door to the maximum length at rst,

and then remove the drawer.

2. Pull the freezer door to the maximum length at rst,

and then remove the drawer.

Gear

Pole of gear

9

6. Install the bottom decorative strip

Open the door of refrigerating chamber, take out the decorative strip from the

chamber, and install it to the shown location, and x it with screw.

(2 screws are provided with the product)

Caution

Please wear gloves when dismantle the bottom decorative strip and adjustable

leveling legs to avoid injury to your hands.

7. Disassembly and Assembly of the Handle of Refr. Door

At the rst, remove the handle connector, and pinch the connector to the hole on the

door shell (Fig. 1). Take out one refr. handle, align the hole on the handle head to the

connector and install the handle to the connector. Take out inside-hexagonal spanner,

and use it to pinch the cap screw tight on the handle head (Fig. 2).

The handle can be dismantled by reverse steps.

8. Disassembly and Assembly of the Handle of Freezer Door

At the rst, remove the handle connector, and pinch the connector to the hole on the

door shell (Fig. 3). Take out one freezer handle, align the hole on the handle head

to the connector and install the handle to the connector. Take out inside-hexagonal

spanner, and use it to pinch the cap screw tight on the handle head (Fig. 4).

The handle can be dismantled by reverse steps.

Preparation

(Fig. 1)

(Fig. 2)

(Fig. 3)

(Fig. 4)

10

Connecting the Water Supply Line

It Is recommended to have this product Installed by a qualied technician.

Cut the water pipe according to need and avoid bending the water pipe too much.

Usually, the pipe length should be less than 5m. If the water pipe is too long, the ice and cold water

content will be affected because there may be insufcient water pressure.

Insert one end of the water supply pipe into the water inlet on the rear of the appliance (Fig.4-12).

Connect the other end into the plastic adaptor. Screw the adaptor onto a suitable 1/2" BSP

connector water outlet.

The water pressure should be between 0.l5~0.6MPa for correct operation of the cold water

dispenser and ice maker. It is recommended to use drinking water for producing ice cubes since

the lter does not sterilise baceria.

Open the water valve to ush the pipe, check leakage in the water pipe joints and allow the water

to run until it is clear.

The water pipe cannot withstand heat. Keep it away from all heat sources.

Before rst use, press the water dispenser pad several times for 1 minute. Do not press for more

than 1 minute to prevent overheating of the pad activator solenoid. Cold water will begin to ow

from the outlet.

The water lter is there to lter impurities in the water, and to make ice clean and hygienic.

It cannot sterilise or destroy anything, so be certain to connect the water pipe to a drinkable water

source.

• To prevent the pipe from freezing, do not install the water pipe in a space below 0°C. When

the temperature of the ice maker is equal to or below -15°C the ice maker will begin to make

ice.

• Throw out the rst few batches of ice cubes if you are making ice for the rst time or have not

made it for a long time.

• After the refrigerator is installed, put the water supply pipe in a suitable place to prevent

crushing and damage.

• If the cubed ice becomes smaller, this may suggest that the lter is blocked from the

impurities.

(Fig. 4-12)

Water pipe

11

Getting Started

1. Power On

Immediately after the power on, the temperature is displayed as the actual temperature of the

refrigerating and freezing chamber. At this time, the set temperature for refrigerating is 5t, the set

temperature for freezing is -IffC, the buttons are in unlocked stutus.

The refrigerator has Power Outage Memory function. At every power on after the rst power on the

refrigerator will run under the settings set at the last time. (See Power Outage Memory Function

for details)

2. Operation Mode of the Refrigerator

Caution

Within the applicable temperature range of the refrigerator, as long as you

selected the Fuzzy Mode, you will not need to adjust other settings to maintain

the best freezing effect regardless of the ambient temperature changes. Make

you worry less and work less.

You may select one of the two modes bellow to set your refrigerator as needed.

(1) Fuzzy Mode: We recommend using the Fuzzy Mode, if where is no special need. (See Fuzzy

Function Setting for details)

(2) Manual Mode: The temperature can be set by using temperature control button. (See

Temperature Setting and Adjustment for details)

3. Put the food into your refrigerator

After running for a while, the inside of the refrigerator is sufciently

cooled At this time, food can be put into the refrigerator.

Note: small freezer drawer may be removed before putting food into

large freezer drawer in order to put more food.

4. If you have lots of fresh food (such as fresh meat) put

intoFreezing Chamber, please start Super Freezing function

12 hour before.

Caution

When the temperature setting changes, the inner temperature will be balanced

after a while.The length of the period depends on the changes made to the

temperature setting, the ambient temperature, door-open times, and the food

Caution stored in the refrigerator.

12

Product Function

A. Function Selection Select Super Freezing,

Ice, Fuzzy, Holiday and Lock.

B. Function Conrmation: enable and disable

the selected function;

C. Freezing Temperature Control Button:adjust

freezing temperature;

D. Refrigerating Temperature Control Button:

adjust refrigerating temperature;

E. Freezing Temperature Display Icon F. Refrigerating Temperature Display Icon

H. Holiday Icon I. Fuzzy Icon J. Ice Icon

K. Super Freezing Icon L. Lock Icon

1. Holiday Function Setting

In the unlocked status, press "Function Select Button", select the Holiday function, at this time

the "Holiday Icon" is blinking, press down the "Function Conrmation Button", the Holiday Icon

displays, and enter the Holiday function; If you want to exit the Holiday function, please press

the "Function Conrmation Button" and select the Holiday function, and the "Holiday Icon" is still

in blinking, press down the "Function Conrmation Button", the Holiday Icon will be off, and the

Holiday function is exited.

Caution

Before activating the Holiday function, please empty the refrigerating chamber to

avoid spoilage.

2. Fuzzy Function Setting

In Fuzzy status, refrigerator will adjust the temperature setting automatically according to the

ambient temperature and the temperature within the refrigerator.

No manual control is required. In the unlocked status, press "Function Select Button", select the

Fuzzy function, then "Fuzzy Cursor" will blink, press down the "Function Conrmation Button",

the Fuzzy Icon will display and enter the function of Fuzzy; If you want to exit the Fuzzy function,

please press the "Function Select Button", select the Fuzzy function, the "Fuzzy Icon" is still

blinking, press down the "Function Conrmation Button", the Fuzzy Icon will off and the Fuzzy

function is exited.

13

Product Function

3. Ice maker switch function setting

First power on, ice maker is in off state . If you want to use the ice maker, in the unlocked status,

please press the "function conrmation button" and select the ice maker function, and the " ice

Icon" is blinking, press down the "Function Conrmation Button", the ice Icon will be on, and the

ice maker function will be used. Note: before ice maker is off, pis remove all the ice in ice maker

and ice-making chamber to avoid ice melt.

4. Super Freezing Function Setting

Super Freezing function is designed to maintain the nutritional value of food inside the freezing

chamber, it will completely freeze the food in a short time. In the unlocked status, press "Function

Select Button", select the Super Freezing function, at this time the "Super Freezing Icon" is

blinking, press down the "Function Conrmation Button", the Super Freezing icon displays, and

enter the Super Freezing function; If you want to exit the Super Freezing function, please press

the "function conrmation button" and select the Super Freezing function, and the "Super Freezing

Icon" is still in blinking, press down the "Function Conrmation Button", the Super Freezing Icon

will off, and the Super Freezing function is exited.

Caution

Select Super Freezing functions in Fuzzy status, the Fuzzy status will exit

automatically; additionally, select Fuzzy function in Super Cooling or Super

Freezing status, the Super Freezing Caution status will exit automatically.

5. Lock/Unlock Functions Setting

In unlocked status, press "Function Select Button", select the Lock function, the "Lock Icon" blinks,

press down the "Function Conrmation Button", the Lock Icon displays, and enter the locked

status; In the locked status, press down the "Function Conrmation Button" for 3 seconds, the

Lock Icon will be off and the locked status is exited. In the locked status, the functional controls

of refrigerating temperature, freezing temperature,Holiday, Fuzzy,and Super Freezing are not

available.

6. Temperature Setting and Control

(1 ) Controi of Freezing Temperature

In the unlocked status, press "Freezing Chamber Temperature Control Button", the original

freezing chamber setting temperature start to blink. Enter freezing chamber temperature setting

status, since then for each single press of this button, the freezing chamber setting temperature is

displayed in cyclic form by "14, -15, -16, -17,-18,-19, -20, -21, -22", if no button-pressing operation

is initialed over 5 seconds, the blinking will stop and conrm the current temperature setting value.

14

Product Function

(2) Control of refrigerating Temperature

In the unlocked status, press" Refrigerating Temperature Control Button ", the original refrigerating

chamber setting temperature start to blink. Enter refrigerating chamber temperature setting status,

since then for each single press of this button, the refrigerating chamber setting temperature is

displayed in cyclic form by "09, 08, 07, 06, 05, 04, 03, 02, 01", if no button-pressing operation is

initialed over 5 seconds, the blinking will stop and conrm the current temperature setting value.

(3) ln the status of Holiday, Fuzzy the refrigerating temperature

control is not available; in Fuzzy and Super Freezing status, the freezing temperature control is not

available.

7. Alarm Function

Open-door Alarm Function. When the refrigerator door is left open fora long-term period or not

closed in tight, the refrigerator will sound a buzzer in a time interval to reminding you close the

door immediately.

8. Energy-saving Display Control Function

30 seconds after button-pressing operation, display screen backlight will be off, this could save

electric energy. When pressing any key or opening the door, resume the display panel lighted

status. The corresponding press-button light will activate for button-pressing operation

9. Power Outage Memory Function

When refrigerator has a power outage, the instantaneous working status during the outage is

memorized. After the power is on, the refrigerator will still run according to the setting tags and

function states before the power outage.

Caution

The Lock function is not memorable. The refrigeratoris at unlocked status when

the power is on.

15

How to save energy

(1) lnstall the appliance in a cool, well ventilated room, far from a heat source (radiator, cooker,

etc.), not in direct sunlight.

(2) The time and frequency for opening of the doors should as short as possible, For example,

store food in an organized way will reduce your time when you take something out from the

appliance.

(3) Store the food covered or packaged.

(4) Let the hot food or drinks to cool down before placing them in the appliance.

(5) When thawing frozen food, place it in the refrigerator compartment. You can use the low

temperature of the frozen food cool the food in the refrigerator compartment.

(6) Do not store too much food in the appliance, that may block air circulation.

(7) Temperature setting , the lower the temperature set in the compartment, the higher the energy

consumption. So it is better to set a higher temperature if your food storage condition is no

problem.

(8) Keep the large freezing drawer closed, take out the small freezing drawer, and then take out

and put the food in the small freezing drawer; in this way, larger using space can be obtained and

power consumption of refrigerator can be reduced.

About Refrigerating Chamber

Please put the frequently-eat or short-term storage

food into refrigerating chamber

Adjusting the temperature level can maintain the average

temperature between 0-10 "C For most of the areas in the

refrigerating chamber, but it can not make long-term preservation

for food, and the refrigerating chamber can only be used as a

short-term storage chamber.

The height of shelf is adjustable

Adjust the shelf to a suitable height for food storage. Please

remove the shelf when adjusting the height. The remove

method is: raise the shelf in upwards incline direction, then lift it

up, and the shelf is removed. When placing it, push-in the joint

along the pad tolower front-end of the shelf and then insert into

the groove.

Caution

Make sure the both ends of shelf are on level position. If it can not maintain the

level position, the shelf may fall or the food may drop out.

Lift up and take out

Upwards

incline

removing

16

About Refrigerating Chamber

The Remove of Crisper Cover

First take out the Crisper Cover and put it to a suitable position,

then uplift the back-end of the cover in a direction(l), then pull it

out in a direction (2).

Full Wid. Drawer

1. Left slide the moisture control knob to increase the cool air

access to the full wid. drawer, so a relatively low temperature is

kept in the full wid. Drawer.

2. Right slide the moisture control knob to decrease the cool air

access to the full wid. drawer, so a relatively high temperature is

kept in the full wid. drawer.

Storage area recommendation for

different kinds of food

Due to the cold air circulation inside the

refrigerator, there are temperature variations at

different parts inside the refrigerator, so different

kinds of food should be placed in different

temperature zones.

(1) eggs, butter and cheese, etc

(2) zip-top can, tin can and seasoning, etc

(3) beverages and other kinds of bottled foods

(4) pickled food, tin can, etc

(5) meat products and snack foods, etc

(6) wheaten food, noodle, tin, milk and tofu, etc

(7) fruits, vegetable and salad, etc

(8) cooked meat and sausages, etc

Refrigerating Chamber Light and Its

Replacement

Parameters for each light: DC12V-, 2W The light is LED

light with low energy consumption and long operation

life. If any unusual activity occurres, do not remove it at

your own discretion, please contact after-sale service

personnel immediately for a replacement.

Temperature

Control Panel

17

Precautions for Refrigerating Food

Do not put hot food into the refrigerator before

cooling it to room temperature.

Put the food into the refrigerator for storage

after it is cleaned and dried from the water

drops.

Food must be sealed before being put into

refrigerator so as to prevent water from

evaporating and keep fruits and vegetables

fresh, and also to avoid the food tainted by

odors.

Food should be refrigerated in classications.

Manage the foods according to their

classications. Daily diet food should be put

at the front of the shelf so the doors do not

need to keep open for a long time, also no

food expiration will occur because of oblivion.

Do not overll the food in the refrigerator,

separate the foods accordingly and left

spaces for cold air circulation, so that a better

refrigerating result can be achieved.

Food storage should not be too close to the

inner wall. The higher moisture contented

food should not be close to the shelf inner

wall to avoid being frozen, so please keep

some distance from the inner wall when

managing the food.

When managing and taking food from diary box, please open and close the diary box according

to the below processes in order to avoid hand stuck.

Caution

The food in the refrigerator, especially greasy food that keeps in touch with

the liner for a long-term period, will cause corrosion to the liner. Avoid

possibly direct contact between food and the liner. When the liner is stained

Caution with oil, please clean it in a timely manner.

La pagina si sta caricando...

Haier HB22FWRSSAA Instructions For Use Manual

Haier HB22FWRSSAA Instructions For Use Manual

in altre lingue

Documenti correlati

Altri documenti