Invacare Alegio Series Manuale utente

Alegio

TM

Invacare

®

User Manual (EN)

Bruksanvisning (SV)

Gebruiksaanwijzing (NL)

Manuel d’utilisation (FR)

Manual del usuario (ES)

Manuale d’uso (IT)

Manual de Utilização (PT)

PREMIÈRES PAGES.indd 1 07/12/11 17:20

DK KVALITETSDEKLARATION

Tillykke med Deres nye seng Invacare

®

Alegio

TM

fra Invacare

®

France Operation SAS.

Deres nye seng er CE - mærket og lever op til alle krav i henhold til direktiv 93/42/EØF om medicinske anordninger.

Sengen er udviklet og konstrueret under størst mulig hensyntagen til brugeren samt alle andre, der enten håndterer sengen eller hjælper til ved sengen.

Invacare

®

Alegio

TM

er udviklet under hensyntagen til de sikkerhedsmæssige krav i den Europæiske Standard EN 1970/A1. Hver seng har gennem hele produktionsforløbet været overvåget og

kontrolleret, og den færdige seng er blevet inspiceret af vores færdigvarekontrol.

Typeskilt påsættes sengen som dokumentation for, at færdigvare kontrollen har godkendt sengen. Før ibrugtagning af Deres seng skal De gennemlæse brugermanualen grundigt.

Invacare

®

France Operation SAS er certiceret i henhold til ISO 9001 og ISO 13485.

DE QUALITETSDEKLARATION

Herzlichen Glückwunsch zu Ihrem neuen Pegebett Invacare

®

Alegio

TM

von Invacare

®

France Operation SAS.

Ihr neuer Pegebett ist gemäß der Richtlinie 93/42/EWG für Medizinprodukte CE-gekennzeichnet.

Der Invacare

®

Alegio

TM

wurde unter Berücksichtigung der Bedürfnisse von Benutzer und Pegepersonal entwickelt und in Übereinstimmung mit der Europäischen Norm EN 1970/A1

konzipiert und hergestellt.

Während des gesamten Herstellungsprozesses unterliegt der Invacare

®

Alegio

TM

einer ständigen Qualitätskontrolle und wird im Anschluss nochmals durch unsere Endkontrolle geprüft.

Das Typenschild sind am Bett angebracht, um die Abnahme durch unsere Qualitätskontrolle zu bestätigen.

Bitte lesen die gesamte Bedienungsanleitung, bevor Sie den Bett in Gebrauch nehmen.

Invacare

®

France Operation SAS ist zertiziert nach ISO 9001 und ISO 13485.

NL KWALITEITSGARANTIE

Gefeliciteerd met de aanschaf van uw nieuwe bed Alegio

TM

van Invacare

®

France Operation SAS.

Invacare

®

Alegio

TM

is CE - gecerticeerd en goedgekeurd conform richtlijn 93/42/EEC betreffende medische hulpmiddelen.

Invacare

®

Alegio

TM

is ontwikkeld en geconstrueerd met inachtneming van de behoeften van de gebruiker en verzorgers.

Invacare

®

Alegio

TM

is ontwikkeld in overeenstemming met de Europese Standaard EN 1970/A1.

Gedurende het gehele productieproces is het Alegio

TM

bed gecontroleerd op kwaliteitsaspecten en het complete bed is na productie zorgvuldig gecontroleerd. Het productlabel zijn op het bed

bevestigd om aan te tonen dat de bedden zijn gecontroleerd en goed zijn bevonden door de afdeling productcontrole. Wij verzoeken u vriendelijk de gehele gebruikershandleiding te lezen voordat u

het bed in gebruik neemt.

Invacare

®

France Operation SAS is ISO 9001 en ISO 13485 gecerticeerd.

IT DICHIARAZIONE DI QUALITÀ

Complimenti per aver scelto il letto Invacare

®

Alegio

TM

prodotto da Invacare

®

France Operation SAS.

Il vostro nuovo letto è marcato CE - ai sensi della Direttiva 93/42/EEC relativa ai dispositivi medici.

Il letto è stato progettato e costruito con un occhio di riguardo per gli utilizzatori e per i loro assistenti. Invacare

®

Alegio

TM

è stato realizzato nel rispetto della Normativa Europea EN 1970/A1.

Il letto è stato oggetto di accurate veriche qualitative durante l’intero processo produttivo; una volta completato è stato controllato dal nostro servizio prodotti niti.

Un’apposita targhetta sono state apposte sul letto a conferma dell’avvenuta verica e accettazione del prodotto da parte del servizio qualità. Prima di utilizzare il letto vi invitiamo a leggere

integralmente il manuale d’uso.

Invacare

®

France Operation SAS è un’azienda certicata ai sensi della Normativa ISO 9001 e ISO 13485.

ES DECLARACIÓN DE CALIDAD

Enhorabuena por su nueva cama Invacare

®

Alegio

TM

de Invacare

®

France Operation SAS.

Su nueva cama cuenta con el marcaje CE - de acuerdo a la directiva 93/42/EOF que hace referencia a los aparatos médicos.

Invacare

®

Alegio

TM

ha sido diseñada y fabricada teniendo en cuenta a los usuarios y las personas que los asisten.

La cama Invacare

®

Alegio

TM

ha sido diseñada de acuerdo a la normativa Europea EN 1970/A1.

El proceso de producción del modelo Invacare

®

Alegio

TM

ha sido supervisado en su totalidad y su calidad inspeccionada, por nuestro control de producto acabado.

La cama cuenta con una placa y marca CE que conrma que la misma ha sido inspeccionada por el control de producto acabado. Por favor lea el manual antes de utilizar la cama.

Invacare

®

France Operation SAS es una empresa certicada ISO 9001 e ISO 13485

FR DÉCLARATION DE QUALITÉ

Félicitations! Vous avez choisi votre nouveau lit Invacare

®

Alegio

TM

.

Votre nouveau lit est marqué CE conformément à la directive 93/42/EEC concernant les dispositifs médicaux.

Invacare

®

Alegio

TM

a été développé et construit en considérant systématiquement les besoins de l’utilisateur et des tierces personnes lors de la manipulation du lit ou de son utilisation.

Invacare

®

Alegio

TM

a été développé conformément au Standard Européen NF EN 1970/A1.

Invacare

®

Alegio

TM

a été supervisé et contrôlé tout au long du process de fabrication et le lit achevé a été inspecté par le contrôle des produits nis. La plaque d’identication sur le lit attestant que

le contrôle des produits nis a approuvé le lit. Le lit répond aux exigences de l’analyse de risques de la norme NF EN 14971.

Nous vous remercions de lire le Manuel de l’Utilisateur dans son intégralité avant d’utiliser le lit.

Invacare

®

est certiée ISO 9001 et ISO 13485.

PT DECLARAÇÃO DE QUALIDADE

Parabéns pela sua nova cama Invacare

®

Alegio

TM

da Invacare

®

France Operation SAS.

A cama tem a marca CE - em conformidade com a directiva 93/42/EEC referente a aparelhos médicos.

A cama foi concebida e desenhada, tendo em consideração o seu utilizador e o seu(s) assistente(s), que o ajudarão a manipular a cama. A cama foi concebida em conformidade com o Standard

Europeu EN 1970/A1.

Durante todo o processo de fabrico e produção, a cama Invacare

®

Alegio

TM

foi supervisionada e a sua qualidade controlada, sendo o produto nal inspeccionado e testado pelo nosso controlo de

qualidade. As etiquetas são colocadas na cama, após a aprovação nal da cama, conrmando e garantindo a conformidade com o nosso controlo de qualidade. Por Favor, leia atentamente este manual

de utilizador antes de utilizar a sua cama.

A Invacare

®

France Operation SAS está certicada em conformidade com ISO 9001 e ISO 13485.

Quality Declaration

Congratulations with your new bed Invacare

®

Alegio

TM

from Invacare

®

.

Your new bed is -marked in accordance with directive 93/42/EEC concerning medical devices.

Invacare

®

Alegio

TM

is developed and constructed with consideration for the user and others handling or

assisting at the bed.

Furthermore, the bed is developed in accordance with the European Standard EN 1970/A1.

Invacare

®

Alegio

TM

is supervised and quality controlled throughout the entire production process, and the

nished bed is inspected by our nished goods control.

Identication label are located on the bed conrming that the nished goods control has approved the bed.

Please read the entire user’s manual before using the bed.

Invacare

®

France Operation SAS is certied according to ISO 9001 and ISO 13485.

PREMIÈRES PAGES.indd 2 18/07/11 18:23

User ManUal (en)

BrUKsanVIsnInG (sV)

GeBrUIKsaanwIjzInG (nl)

ManUel d’UtIlIsatIon (Fr)

ManUal del UsUarIo (es)

ManUale d’Uso (It)

ManUal de UtIlIzação (Pt)

Alegio

TM

Invacare

®

ENSVNLFRESITPT

PREMIÈRES PAGES.indd 3 26/07/11 15:16

User ManUal (en)

BrUKsanVIsnInG (sV)

GeBrUIKsaanwIjzInG (nl)

ManUel d’UtIlIsatIon (Fr)

ManUal del UsUarIo (es)

ManUale d’Uso (It)

ManUal de UtIlIzação (Pt)

Alegio

TM

Invacare

®

ENSVNLFRESITPT

PREMIÈRES PAGES.indd 3 26/07/11 15:16

EN

Table of contents

User’s part ............................................... 8

1. In general ............................................ 8

2. Operating the Invacare

®

Alegio

TM

....................... 9

Technical part ........................................... 11

3. Safety guidelines .................................... 11

4. Dismounting/mounting the Invacare

®

Alegio

TM

........... 12

5. Removal of cables from the control unit ................ 15

6. Mounting/dismounting the accessories ................. 15

7. Emergency lowering of the backrest and/or thigh section . 16

8. Operating the accessories ............................. 17

9. Accessories ......................................... 18

10. Cleaning ............................................ 19

11. Maintenance and check-ups ........................... 19

12. Maintenance chart ................................... 20

13. Disposal ............................................ 20

14. Trouble-shooting the electrical system ................. 21

15. Technical specifications ............................... 22

16. Electrical data ....................................... 23

17. Weights ............................................ 23

18. Electro Magnetic Compliance (EMC) .................... 24

EN

7

EN.indd 7 26/07/11 15:19

User’s part

Congratulations with your choice of the Invacare

®

Alegio

TM

nursing bed.

• The Invacare

®

Alegio

TM

is designed for patients over the age of 12 years especially for home care.

• The Invacare

®

Alegio

TM

combines excellent stability and ergonomic design with easy disassembly and

operation.

• Max. weight: 170 kg.

Max. patient weight: 135 kg (provided that the weight of the mattress and the accessories do not exceed

35 kg).

Important! The max. load of the bed must not be exceeded.

In order to optimise the patient’s comfort, Invacare

®

France Operation SAS recommends using a 16 cm mattress.

1. In general

Please read the entire User’s part carefully before using the bed.

All indications of right and left are based on a patient lying on the back in the bed.

Check whether the bed shows any signs of damage. If the bed is damaged, see terms of delivery.

Please contact your Invacare

®

supplier if, contrary to our expectations, a problem should arise in

connection with the delivered product.

Invacare

®

France Operation SAS accepts no liability for any use, change or assembly of the

product other than as stated in this User’s Manual.

The bed must not be used by patients under 12 years of age, or by patients with body size

equivalent to an average 12-year-old or smaller.

Electromagnetic interference between the bed and other electrical products can occur.

To reduce or eliminate such electromagnetic interference, increase the distance between the bed

and the products or switch them off.

This medical bed can be used together with medical electrical equipment connected to the heart

(intracardially) or the blood vessels (intravascularly), provided that following points are respected:

- The medical bed should be equipped with means for potential equalization connection marked

out by a symbol shown in the back of this manual.

- Medical electrical equipment should not be xed on the bed’s metallic accessories such as side rails,

lifting pole, drip rod, bed ends ect.

In addition, the medical electrical equipment power supply cord should be kept clear of the accessories

or any other moving part of the bed.

If the bed is used by restless (spasms) or confused persons, an ACP box can be used for blocking

the hand control functions.

Ensure the bed is adjusted to it’s lowest position before leaving the bed unattended - thereby the effect of

fall-down / entrapment accidents is reduced.

Always apply the brakes when there is no need for moving the bed, to avoid accidents during entering or

exiting the bed, and during handling of the patient.

Disconnect the plug from the mains before moving the bed. The cable must be kept clear off the oor and

the castors during transport.

Make sure that the mains cord cannot be jammed or in any other way damaged, when the bed is used.

Always leave the bed in the lowest position. Otherwise there is a risk of entrapment due to accidental

lowering of the mattress support. A person under the bed can be seriously injured during height

adjustments.

8

EN.indd 8 18/07/11 18:26

EN

• The Invacare

®

Alegio

TM

is CE- marked in accordance with directive 93/42/EEC concerning Medical

Apparatus.

• The motors and the control box of the Invacare

®

Alegio

TM

are approved according to EN 60601:1996-03.

• The Invacare

®

Alegio

TM

has undergone a risk analysis according to EN 14971.

•

The control unit, motors and hand control are protected according to IP 66. A lock cam must be used on the

control unit, otherwise Invacare

®

France Operation SAS cannot guarantee the protection.

Max. load: 170 kg – max. patient weight: 135 kg. Max. load is stated on the identication label.

NOTE! The max. load of the bed must not be exceeded.

Operating the hand control

Sitting position (green button) - up/down

(Only 4-sectioned beds)

Use the button with the symbol shown on the left.

Adjustment of backrest - up/down

Use the button with the symbol shown on the right.

Adjustment of the thigh section - up/down

(Only 4-sectioned beds)

Use the button with the symbol shown on the right.

Height adjustment of mattress section - up/down

NB! Not applicable to beds with manual leg adjustment.

2. Operating the Invacare

®

Alegio

TM

Adjustment of leg section (only on 3-sectioned beds)

Operate the leg section by lifting the mattress handle.

Up: Lift the mattress handle on the leg section.

Down: Lift the mattress handle on the leg section all the way up and

then lower the leg section.

9

EN.indd 9 18/07/11 18:26

2)

1)

2)

Operating the braking castors

Operating castors without central braking system

When the bed is positioned correctly, at least one castor at the head

end and one castor at the foot end must be locked.

1) Braking: Step on the pedal.

2) Releasing the brake: Step on the release pedal.

Operating castors with central braking system

When the bed is positioned correctly, the castors must be locked.

1) Braking: Step on the bow.

2) Releasing the brake: Lift the bow, until the brake is released.

Operating the steerable castor

The Alegio

TM

with central braking system may be equipped with a

steerable castor.

The steerable castor is operated by means of the central braking pedal.

1) Activating the steering: If the brake is in neutral, step on the

green pedal.

2) Deactivating the steering: Step on the red pedal, until the brake is in

neutral position.

Set-off from the castors might under special conditions appear at different types of absorbing oor covering -

including untreated or badly treated oors. In matters of doubt, Invacare

®

recommends to place a suitable kind of

protection between the castors and the oor.

10

EN.indd 10 18/07/11 18:26

EN

3. Safety guidelines

Disconnect the plug from the mains before moving the bed. The cables must be kept clear off the

oor and the castors during transport.

Make sure that the mains cord cannot be jammed or in any other way damaged, when the bed is

used.

The brakes of the bed must be activated during nursing of a patient in the bed and when the

bed is adjusted.

The main plug must be accessible any time to disconnect the device from mains missing.

We recommend to mount the mains cable on the hook for this purpose, see following picture.

Adjust all mattress support sections to a horizontal position before transporting an assembled bed.

Hold the top of the bed end with both hands while the bed is pushed/pulled.

Caution! Please ensure that the pipe pins are fully inserted through both holes of the tubular

section, and that the spring clip is fully engaged prior to operating the lifting mechanism on the bed.

Furthermore, please ensure that all four plastic bushings are intact and located correctly between

shear arm/base and shear arm/top frame.

NB! Do not pull the clamp part of the pipe pin during dismantling – the clamp may be deformed,

thus being unable to lock properly.

Risk of entrapment of ngers during assembly and operation of the bed end and side rail.

A minimum of 2 persons are required to release a mattress support.

There is a risk of entrapment while operating the side rails.

Position the lifting pole in such a way that the handle extends inwards across the bed. If the handle

has been turned away from the bed while the lifting pole is being used, the bed can tip.

We recommend to mount the mains cable on the hook for this purpose,

see picture below.

11

EN.indd 11 07/12/11 17:32

A)

B)

Adjust all mattress support sections to a horizontal position before transporting an assembled bed.

Hold the top of the bed end with both hands while the bed is pushed/pulled.

Only personnel who have been trained or instructed by Invacare

®

may perform the service work described in this

manual in the chapters 12 and 13.

If the functions of the bed change, check the bed according to chapter 13.

The Invacare

®

Alegio

TM

must be stored in a room with a humidity of 10 - 80%, RH within a temperature of < 0 - 50°C.

4. Dismounting/mounting the Invacare

®

Alegio

TM

Dismounting the Invacare

®

Alegio

TM

1. Brake the bed and bring it to its lowest position and then about 5 cm up.

2. Remove the accessories: Siderails, bed ends and lifting pole.

3. Dismountthengerscrewsatbothsides(seeillustrationA).

4. Dismountthecablefromthebackrest/legsection(seeillustrationB).

5. Dismountthetopframeattheheadendandplaceitinaverticalposition(seeillustrationCandD).

6. Liftthelegsectionanddismountthepipepins(seeillustrationE).

7. Dismountthetopframeatthefootendandplaceitinaverticalposition(seeillustrationF).

8. Dismountthesheararm(seeillustrationG,H,I,JandK).

Finger screw

12

EN.indd 12 26/07/11 15:22

D)C)

F)E)

G) H)

EN

13

EN.indd 13 18/07/11 18:26

L)

K)I) J)

Mounting the Invacare

®

Alegio

TM

1. Mount the shear arm (see illustration K, J, I, H and G).

2. Mount the leg section and the pipe pins, ensuring that the spring clip is securely latched over

the end of the pin (see illustration F and E).

3. Mount the head section (see illustration D and C).

4. Push the head section into the leg section (see illustration L).

5. Mount the cable for the backrest motor/leg section (see illustration B).

6. Mount the nger screws in both sides (see illustration A).

7. Mount the accessories: Siderails, bed ends and lifting pole.

Caution! Please ensure that the pipe pins are fully inserted through both holes of the tubular

section, and that the spring clip is fully engaged prior to operating the lifting mechanism on the bed.

Furthermore, please ensure that all four plastic bushings are intact and located correctly between

shear arm/base and shear arm/top frame.

NB! Do not pull the clamp part of the pipe pin during dismantling – the clamp may be deformed,

thus being unable to lock properly

.

Mounting of the pipe pin between shear arm and base

The pipe pin must be mounted with the opening upwards

and locked.

14

EN.indd 14 18/07/11 18:26

0-6 cm

EN

5. Removal of cables from the control unit

Raise the bed to highest position and remove the mains cord

from the socket outlet.

Use a small tool (such as screwdriver) to release the pawl on

the locking cam.

Hold the locking cam while releasing the remaining pawls.

With all pawls released, the locking cam can be removed from the

control unit.

Motor connections are indicated on the label behind the cables.

6. Mounting/dismounting the accessories

Risk of entrapment of ngers during assembly and operation of the bed end and side rail.

Mounting the Vibeke bed end and Verso side rail

1. Lower the bed ends into the U-proles.

2. Place the side rail with the release system in the leg end, and tighten both nger screws.

15

EN.indd 15 21/12/11 09:38

A)

B)

C)

D)

Mounting the Kirsty bed end and Nina side rail

1. The bed end is mounted as shown on illustration A - push the bed end all the way down, and secure it with

the two nger screws (see illustration B).

2. Raise the mattress support to approximately 1/3 from lowest position.

3. Remove the side rail stopping bracket and nger screws (see illustration C).

4. Remove the protective tape from the locking dowels in each end of the side rail.

5. Install one end at a time. Lift the lower wooden rail with one hand while guiding the metal bow into the bed

end bar (see illustration D).

6. Press the locking pin of the side rail with one nger.

7. Raise the side rail until the locking pin engages with an audible click, thus preventing the side rail from falling down.

8. Re-install the side rail stopping bracket and nger screws (see illustration C).

Mounting the lifting pole

Lower the lifting pole into the lifting pole tube. The lifting pole MUST be fastened with a nger screw.

7. Emergency lowering of the backrest and/or thigh section

A minimum of 2 persons are required to release a mattress support.

Remove the plug from the mains before emergency lowering of the mattress support.

In an emergency, the mattress sections are released by pulling out the cotter pin from the motors.

Two persons hold the mattress section in locked position.

One of them pulls out the cotter pin. Both slowly lower

the mattress section until it is complete down.

16

EN.indd 16 18/07/11 18:26

A B

EN

8. Operating the accessories

To open (fold the siderail):

Pull the locking button and start the folding movement with one hand on the upper

horizontal bar. Release the locking button during the folding movement and handling

the siderail until its lower position (under the mattress).

Take care to don’t squeeze body of patient during this step.

To avoid all nger pinch out during the manipulation, ngers must be positioned in the

two lateral dug areas designed for that purpose, in locking button (grey zone, next page).

To close (unfold the siderail): Pull the siderail by the upper bar and rising until

it engage in the locking system.

Take care to don’t squeeze body of patient during this step.

Operating the Nina side rail

Up: Pull up the top wooden siderail bar, until the locking pins engages with an audible click.

Down: Lift the top wooden siderail bar while pressing the two locking pins

together. Lower the siderail.

Operating Line and Britt side rail

The bed end may be equipped to lock the siderail at half height as well as in the top position. Normally the side rail

can only be locked in top position.

Up: Pull up the top wooden side rail bar, until the locking pin locks with an audible click.

Down: Lift the top wooden side rail bar and press the two locking rings together. Lower the side rail.

Raise Release Lower

There is a risk of entrapment while operating the side rails.

Adjusting the height of the lifting pole handle

Loosen the cord as shown in ill. A. The lifting handle can now be

adjusted to the desired height. Press the cord together as shown in

ill. B and check that the cord is secured in the cord lock by pulling

the handle.

Position the lifting pole in such a way that the handle

extends inwards across the bed. If the handle has

been turned away from the bed while the lifting pole

is being used, the bed can tip.

Max. load of the lifting pole: 80 kg.

17

EN.indd 17 08/12/11 19:01

9. Accessories

Article

Nina wooden side rail - 1 pair

Britt wooden side rail - 1 pair

Line wooden side rail - 1 pair

Verso II steel side rail - 1 pair

Kirsty wooden bed end with slide bars - 1 pair

Kirsty wooden bed end - 1 pair

Vibeke wooden bed end (high) - 1 pair

Lifting pole

Hand control support

IV drip rod

Support for IV drip rod

IR handset

Please only use original spare parts.

Spare parts lists and extra user manuals for the Invacare

®

Alegio

TM

can be ordered from Invacare

®

.

18

EN.indd 18 07/12/11 17:58

EN

10. Cleaning

The Invacare

®

Alegio

TM

does not tolerate cleaning in automatic washing plants or using water jet based cleaning

equipment.

The bed is washed down using a sponge, cloth or brush. Use ordinary disinfectioning detergents.

Dry the bed after cleaning.

Never use acids, alkalines or solvents such as acetone or cellulose thinner.

The hand control, motors and the control box can be wiped with a moist cloth

(the water temperature must be below 30° C).

When cleaning: Bring the backrest to its top position. Bring the bed to its top position. Disconnect the power

cord by pulling the plug from the socket outlet before cleaning the bed. The risk of entrapment of ngers is mini-

mised, as accidental elevation of parts of the bed is not possible.

11. Maintenance and check-ups

Only personnel who have received the necessary instruction or training may perform service and maintenance on

the Invacare

®

Alegio

TM

.

After 3 months of use the following must be checked:

• Tightening of the nger screws at the inserts in the middle of the bed.

• Fastening of the side rail - locking system and moving system.

With normal operation, the rst service inspection is required after 2 years and thereafter every second year,

according to the maintenance chart shown in chapter 12.

Please note:

The mattress support must be supported during service inspections to prevent accidental lowering.

Motors, control unit and hand control

These parts are serviced by exchanging the faulty part.

Motors, control unit and hand control must be regularly cleaned from dust and dirt and must be inspected for

mechanical damage or breakage.

Inspect anchor points, cables, piston rod, casing and plugs and check the correct functioning of the motor.

19

EN.indd 19 18/07/11 18:27

12. Maintenance chart

Only personnel who have received the necessary instruction or training may perform service

and maintenance on the Invacare

®

Alegio

TM

S/N (located on mattress support): _______________________________

What to check for: Date:

Electrical safety check in accordance with the values in the standard

EN 60601-1

Check the side rails’ mounting and locking/movement.

Check mounting and braking of wheels.

Check height adjustment motor - suspension, and performance.

Check backrest and leg rest motor - suspension and performance.

Check that cables and plugs are undamaged.

Check rastox tting and its function.

Check weldings.

Have damaged coating repaired.

Lubrication performed:

1. Points of rotation in mattress support and base frame, with oil.

2. All of the motors’ tension rods, with oil.

Lubricate with medically clean oil, e.g. KEN-WO 50, order no.: 813239.

NB! The wooden side rails´ gliding system must not be lubricated with oil

- otherwise the wooden bars will move sluggishly.

A service contract can be made in countries where Invacare

®

has its own sales company.

Furthermore, Invacare

®

offers courses in service and maintenance of the Invacare

®

Alegio

TM

.

13. Disposal

This product has been supplied from an environmentally aware manufacturer that complies with the Waste

Electrical and Electronic Equipment (WEEE) Directive 2002/96/CE.

This product may contain substances that could be harmful to the environment if disposed of in places (landlls)

that are not appropriate according to legislation.

The ‘crossed out wheelie bin’ symbol is placed on this product to encourage you to recycle wherever possible.

Please be environmentally responsible and recycle this product through your recycling facility at its end of life.

20

EN.indd 20 18/07/11 18:27

EN

14. Trouble-shooting the electrical system

Only personnel who have received the necessary instruction or training may perform service and maintenance on

the Invacare

®

Alegio

TM

.

Motor does not

run

No motor sound

Motor sound

Sound from the

relay

No relay sound

Piston rod does

not move

Motor plug not

connected

Defective motor

Defective control

unit

Defective hand

control

Defective motor

21

EN.indd 21 18/07/11 18:27

70

130

210

33 - 77

90

156 - 200

15. Technical specifications

All measurements are given in cm. All angles are stated in degrees. All measurements and angles are stated without

tolerances.

Invacare

®

reserves the right to change the stated measurements and angles.

Transportation and storage conditions:

Temperature between -30° and 40° C

Humidity between 10 and 80 % RH

Pressure between 700 and 1.100 hPa

3-sectioned

4-sectioned

22

EN.indd 22 18/07/11 18:27

La pagina sta caricando ...

Invacare Alegio Series Manuale utente

Invacare Alegio Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti