Invacare Softform Premier Active 2 Manuale utente

Invacare

®

Softform

®

Premier Active 2

This manual must be given to the user of the product.

Before using the product, read this manual and save it for future reference!

EN Mattresses User Manual

DE Matratzen Gebrauchsanweisung

FR Matelas Manuel d’utilisation

ES Colchones Manual del usuario

IT Materassi Manuale d‘uso

PT Colchões Manual de instruções

SV Madrasser Bruksanvisning

NO Madrasser Brukerveiledning

DA Madrasser Brugsanvisning

Every effort has been made to ensure that the contents of this publication are fully up-to-date

at the time of going to print. As part of its ongoing improvement of products, Invacare Ltd

reserves the right to modify existing models at any time. Invacaredealers will be notied of any

such modications. Any use of this publication, or of parts thereof, as well as any reproduction

of images, must have the written consent of Invacare Ltd.

EN: Complies with Directive 93/42/EEC concerning medical devices.

DE: Konform mit Richtlinie 93/42/EWG für Medizinprodukte.

FR: Conforme à la directive 93/42/ECC relative aux dispositifs médicaux.

IT: Conforme alla direttiva 93/42/ECC relativa ai prodotti medicali.

ES: Cumple con la directiva 93/42/EEC relativa a los productos sanitarios.

PT: Em conformidade com a directiva 93/42/EWG do Conselho relativa aos dispositivos médicos.

SV: Uppfyller direktiv 93/42/EWG om medicintekniska produkter.

NO: Overholder retningslinjerne i 93/42/EWG om medisinsk utstyr.

DA: Overholder direktiv 93/42/EWG om medicinske produkter.

Softform

®

is a registered trademark of Invacare Ltd.

Contents

english

1 General 4

1.1 General information 4

1.2 Symbols 4

1.3 Symbols Guide 4

1.4 Guarantee 4

1.5 Intended use 5

1.6 Product Description 5

1.7 Service Life 5

2 Safety 6

2.1 Safety information 6

3 Setup and installation 7

3.1 Safety information 7

3.2 Installing the system 8

4 Usage 8

4.1 Safety information 8

4.2 CPR Procedure 9

4.3 Pump Software Schematic 10

4.4 Pump Menu Display 11

5 Transport 13

5.1 Safety information 13

5.2 Transport Mode 13

6 Maintenance 13

6.1 Inspection 13

6.2 Cleaning and Care 13

7 After-Use 14

7.1 Storage 14

7.2 Re-Use 15

7.3 Disposal 15

8 Troubleshooting 15

9 Technical Data 16

9.1 General Data 16

9.2 Pump Unit 16

Softform

®

Premier Active 2 Mattresses General

4

1 General

1.1 General information

Essential nursing care is pivotal in pressure ulcer prevention.

The Softform

®

Premier Active 2 mattress will positively contribute to

the outcome of a pressure ulcer prevention care plan.

Education, clinical judgement and action based planning based on

vulnerability are fundamental factors in prevention of pressure ulcers.

A range of assessment scales can be used as a formal method of

assessing risk from pressure ulcer development, and should be used in

conjunction with an informal assessment (informed nursing judgement).

Informal assessment is considered to be of greater importance and

clinical value.

Please heed all the notes, particularly the safety information, and act

accordingly.

Should you require more information on the Invacare

®

Softform

®

Premier Active 2 mattress please refer to the Invacare

®

Softform

®

Brochure and contact details on the back page of this User Manual.

1.2 Symbols

Warnings

In this User Manual warnings are indicated by symbols. The warning

symbols are accompanied by a heading that indicates the severity of the

danger.



WARNING

Indicates a hazardous situation that could result in serious

injury or death if it is not avoided.



CAUTION

Indicates a hazardous situation that could result in minor or

slight injury if it is not avoided.

!

IMPORTANT

Indicates a hazardous situation that could result in damage to

property if it is not avoided.

Tips and recommendations

i

Gives useful tips, recommendations and information for efci-

ent, trouble-free use.

1.3 Symbols Guide

Do not pierce

or cut

Line dry

Do not dry

clean

Declaration of

conformity

Do not put

near ame

80°

Recommended

80 °C

247.6 kg

User weight

limit of

247.6 kg

Do not iron

Do not bleach Tumble dry low

heat

1.4 Guarantee

We provide a manufacturer’s warranty for the product in accordance

with our General Terms and Conditions of Business. Guarantee claims

can only be made through the relevant specialist dealer.

Standard Invacare

®

Terms

This is to certify that your Softform

®

Premier Active 2 Mattress is

warranted by Invacare

®

Ltd for a period stated in the Table “Technical

Data” of this user guide.

The Warranty of your Invacare

®

Softform

®

product is valid from time

of shipping.

Softform

®

Premier Active 2 MattressesGeneral

5

If a defect or fault is discovered the Invacare

®

dealer or Local Business

Development Manager from whom the appliance was obtained must be

notied immediately.

The manufacturer will not accept responsibility for damage caused by

misuse or non-observance of the instructions set out in this user guide.

During the period of the warranty any products that have become de-

fective due to faulty workmanship or materials will be renewed without

charge.

The warranty will be forfeited should any unauthorized alteration be

made to the equipment.

Both warranty and re retardancy Certication will become null and

void if non-Invacare

®

spares are used on any Invacare

®

Softform

®

Mattress products.

The purchaser’s statutory rights under the Consumer Protection Act

are not affected.

Quality and Flame Retardancy

Quality is fundamental to the company’s operation, working within the

disciplines of ISO 9001 and ISO 13485.

The Softform

®

Premier Active 2 Mattress features the CE mark, in

compliance with the Medical Device Directive.

The foam and covers used to manufacture the Invacare

®

Softform

®

ran-

ge of mattresses are independently tested and certied in accordance

with EN 597-1 and EN 597-2 and BS 7177 Crib 5.

The pump unit is tested to EC Directive 89/336/EEC, EN 55022 and

EN 61001-1, 2. Manufactured to comply with EN 60601-1.

For further information please contact Invacare in your country

(addresses see back page of this manual).

1.5 Intended use

This pressure redistribution mattress and pump is intended to be used

in conjunction with an appropriately sized bed frame, as part of an

overall pressure ulcer prevention program of care.

It can be used safely in static mode (deated) for static pressure redis-

tribution, or in dynamic mode (inated) should an alternating pressure

support surface be required.

This product has been designed to deliver effective pressure reduction

to users, when the product is in normal use which is dened by Inva-

care

®

Ltd as when the support surface is covered with a cotton, cotton

combination or linen bed sheet, and any one of these would be the

only item deployed between the support surface and the user.

1.6 Product Description

The Softform

®

Premier Active 2 mattress system acts as a static pres-

sure reducing support/mattress for patients at high risk that can, by

facilitating the air pump, introduce effective alternating pressure if the

patients condition requires alternating pressure therapy.

The water-resistant cover provides a vapour-permeable, multi stretch

surface, to promote patient comfort and to maximise the effectiveness

of the foam core.

The complete system comprises of:

A mattress insert comprised of alternate air cells that connect to a

twin air connector hose.

A Micro-processor controlled air pump unit.

A 5 meter power lead.

1.7 Service Life

We estimate a life expectancy of ve years for these products, provided

they are used in strict accordance with the intended use as set out in

this document and all maintenance and service requirements are met.

The estimated life expectancy can be exceeded if the product is care-

fully used and properly maintained, and provided technical and scientic

advances do not result in technical limitations. The life expectancy can

also be considerably reduced by extreme or incorrect usage.

The fact that we estimate a life expectancy for these products does not

constitute an additional warranty.

Softform

®

Premier Active 2 Mattresses Safety

6

2 Safety

2.1 Safety information



WARNING

▸ Do not use this product or any available optional equipment

without first completely reading and understanding these

instructions and any additional instructional material such as

user manuals, service manuals or instruction sheets supplied

with this product or optional equipment. Invacare product

manuals are available at www.invacare.co.uk or your local

dealer. If you are unable to understand the warnings, cau-

tions or instructions, please contact a healthcare professio-

nal, dealer or technical personnel before attempting to use

this equipment – otherwise, injury or damage may occur.



WARNING

Invacare products are specically designed and manufactured

for use in conjunction with Invacare accessories. Accessories

designed by other manufacturers have not been tested by

Invacare and are not recommended for use with Invacare

products.

The introduction of certain third party products between

the mattress surface and the user may reduce or impede the

clinical effectiveness of this product.

’Third party products’ may include, but are not limited to

items including under blankets, plastic sheets and sheepskins,

etc. Heated over blankets must only be used in consultation

with a suitably qualied healthcare professional, as an increase

in temperature can increase the risk of developing pressure

ulcers.



WARNING

Bed sheets must be loosely tted, with creases smoothed out.

Care must always be taken to ensure that the support surface

in contact with the user is kept free from crumbs and other

food debris, and that drip cables, stents, and other foreign

objects do not become entrapped between the user and the

pressure reducing surface of the mattress, as this may result in

the development of pressure ulcers.



WARNING Risk of fire or explosion!

A cigarette can burn a hole in the bed surface and cause

damage to the mattress. Also, patient clothing, bed sheets, etc,

may be combustible and cause a re. Failure to observe this

warning can result in a severe re, property damage and cause

physical injury or death.

There is an explosion risk if used with ammable anesthetics.

There is a possible re hazard when used with oxygen admi-

nistering equipment other than nasal mask or half bed tent

type.

▸ Do not smoke while using this device.

▸ An oxygen tent may not extend below mattress support

level.

!

IMPORTANT

The information contained in this document is subject to

change without notice.

▸ Check all parts for shipping damage and test before using.

▸ In case of damage, do not use.

▸ Contact Invacare/Carrier for further instructions.

Softform

®

Premier Active 2 MattressesSetup and installation

7

3 Setup and installation

3.1 Safety information



DANGER Electrical shock hazard!

▸ Do not remove pump cover.

▸ Refer to qualified service personnel.

▸ Before performing any maintenance to the power unit,

disconnect the power lead from the wall outlet.

▸ Do not insert items into any openings of the control unit.

Doing so may cause fire or electric shock by shorting the

internal components.

▸ The control unit must be kept away from all heat sources

and radiators during operation.

▸ Connect the equipment to properly grounded three prong

wall outlet using the 5 meter power lead provided with the

product.

▸ Grounding reliability depends upon a properly grounded

receptacle (3-prong).



WARNING Risk of entrapment!

Patient entrapment with the bed side rails may cause injury or

death.

Proper patient assessment and monitoring, and proper main-

tenance and use of equipment is required to reduce the risk

of entrapment. Variations in bed rail dimensions, and mattress

thickness, size and density could increase the risk of entrap-

ment.

▸ Mattress must fit bed frame and side rails snugly to prevent

patient entrapment. Follow the bed manufacturer’s instruc-

tions.

▸ After any adjustments, repair or service and before use,

make sure all attaching hardware is tightened securely. Rails

with dimensions different from the original equipment sup-

plied or specified by the bed manufacturer may not be inter-

changeable and may result in entrapment or other injury.



WARNING

The Softform

®

Premier Active 2 is recommended to be ins-

talled on medical bed frames with bed sides or assist rails. It is

preferred that the rails to be in the raised position whenever

the patient is on the bed. Healthcare professionals assigned

to each case should make the nal determination whether

side assist rails are warranted after assessing patient risk of

entrapment.

Controls on the footboard may be obstructed by the power

unit on a few bed frames. It may be necessary to relocate the

power unit.

▸ Before placing the patient on the bed, check that air hoses

and power cord are clear of moving bed components.

▸ Operate all bed frame motorized functions through their

full range of motion to be certain that there is no pulling,

interference or pinching.

Softform

®

Premier Active 2 Mattresses Usage

8

3.2 Installing the system

▸ Place the pump unit at the end of the

bed (preferably hung by the built in pump

hooks).

▸ Detach the Softform

®

Premier Active 2

twin hose from the end of the mattress.

▸ Connect it to the pump.

(An automatic click will signify a secure

connection).

▸ Connect the mains power lead to the

pump unit and a suitable power supply.

▸ Switch on mains power.

▸ Switch on pump switch.

System will pressurise (see chart 4.3, page 10)

shown by a green light and three audible

beeps.

▸ Correct pressure shown by a green light

and two audible beeps.

4 Usage

4.1 Safety information

▸ Remove all packaging before use.

▸ Place the mattress directly on the frame of the bed.



WARNING

It is very important for the patient to reposition themselves,

or to be repositioned, on a regular basis. This must be based

on the clinical judgement of a qualied healthcare professional.

This relieves pressure which helps prevent both tissue com-

pression and potential ulcer formation.

▸ Always consult a qualified healthcare professional before

using the Softform

®

Premier Active 2.

▸ Monitor the patient frequently.



CAUTION

▸ The printed side of the mattress cover must always be

facing upwards.

▸ Make sure that the distance between the surface of the

mattress and the top of the side rail should be at least

220 mm.

!

IMPORTANT

Medical equipment including infusion pumps and monitors

should be attached to appropriate bed accessories. In do-

mestic settings common causes of damage include cigarette

burns and the claws of pets that puncture covers, allowing

uid ingress and staining.

Softform

®

Premier Active 2 MattressesUsage

9

!

IMPORTANT

▸ To prevent accidental cover damage, do not place hypo-

dermic needles, venflons, scalpels or other similarly sharp

objects onto the mattress. Ensure that all venflons are taped

down correctly with no sharp edges exposed.

▸ When using bridging boards or other patient transfer aids,

care should be taken not to damage the mattress cover.

All transfer aids should be checked for any sharp edges or

burrs before use as these can damage the mattress cover.

▸ Make sure that the mattresses are not jammed or damaged

by sharp edges when used on beds with an adjustable frame.

▸ When using the Softform

®

Premier Active 2 on a profiling

bed ensure that the knee break is used before the backrest.

4.2 CPR Procedure

The Softform

®

Premier Active 2 mattress has been fully tested to com-

ply with the current CPR standard of 4 – 5 cm compression depth. This

was achieved at all stages of ination/deation.

A report on these ndings conducted by the Resuscitation Unit at the

University Hospital of Wales, Cardiff is available upon request.

▸ Hold down Red CPR button.

▸ Pull hose connector rmly away from the pump.

▸ Switch off the pump.

Mattress will start to deate.

▸ When CPR is complete reactivate the system following chapter 3.2,

page 8.

Softform

®

Premier Active 2 Mattresses Usage

10

4.3 Pump Software Schematic

Language

Pressure

40 50 60 70 80

System Setup

System OK

60mmHg

Alarm event

Rotor Failure

Low Pressure

Switch on pump

English

Norsk

Dansk

Svenska

Português

Italiano

Español

Deutsch

Française

Softform

®

Premier Active 2 MattressesUsage

11

4.4 Pump Menu Display

Task Action Display

1

Power up.

▸ Switch pump on.

Three audible beeps.

LCD illuminates.

Green light illuminates.

“System setup” displayed.

After 10 minutes “System OK” displayed.

2

Menu option ▸ Cannot enter menu.

Wait until set up is complete

“System OK”.

3

Disconnection of CPR

or

Disconnection of hose

in mattress.

▸ Low Pressure alarm.* “Low Pressure” displayed with audible beeps.

4

Enter menu mode.

(3 second time limit

between each func-

tion).

▸ Press arrow Up.

then

▸ Press arrow down.

“System OK” with “1” underneath.

“System OK” with “2” underneath.

▸ Press OK.

“Pressure” displayed.

Pump display will revert back to “System OK” if no

selection made within 15 sec.

Softform

®

Premier Active 2 Mattresses Usage

12

Task Action Display

5

Pressure adjustment.

▸ Press OK button to select

Pressure.

Default set at “60mmHg“.

▸ Arrow up to selected

pressure.

or

▸ Arrow down to selected

pressure.

60 ↑ 70 ↑ 80mmHg.

60 ↓ 50 ↓ 40mmHg.

▸ Press OK button. Pressure displayed under “System OK”.

6

Follow sequence 4 to

enter Language mode.

▸ Toggle from Pressure using

↑ or ↓ button.

▸ Press OK button.

“Language” displayed.

7

Language selection

using sequence 6.

▸ Toggle from Language using

↑ or ↓ button to desired

language.

▸ Press OK button.

“English“ default.

Available languages, see chapter 4.3, page 10.

* Low Pressure Alarm will only function after the system has gone through full cycle set up (System OK).

Softform

®

Premier Active 2 MattressesTransport

13

5 Transport

5.1 Safety information

!

IMPORTANT

▸ Take care when handling mattresses to ensure no damage

to the cover. It is recommended that two people life/carry

mattresses.

▸ Avoid contact with jewellery, nails, abrasive surfaces etc.

▸ Do not drag mattresses.

▸ Avoid contact with wall, door frames, door catches or locks

etc.

▸ Do not transport in roll cages unless completely protected

from the sharp edges of the cage.

5.2 Transport Mode

If it is necessary to move the bed or mattress simply.

▸ Turn off power supply.

▸ Disconnect pump lead (if necessary the air hose).

▸ When system is ready to reactivate following

chapter 3.2, page 8.

Air supply hose should be stored by attaching fastener at foot of the

mattress.

6 Maintenance

6.1 Inspection

Check mattresses (foam, air insert and cover) for strike-through

(this may include uid ingress, stains, rips or damage) after the release

of each patient, after ending of the period of use or on a minimum

monthly basis (depending on which occurs rst) by a suitably qualied

and competent person.

Check mattresses

▸ Unzip the cover completely.

▸ Check for any staining on the white underside of the cover.

▸ Check for any staining on the interior foam.

▸ Replace any stained items and dispose of as per local authority

procedure.

6.2 Cleaning and Care

!

IMPORTANT

All cleaning agents and disinfectants used must be effective,

compatible with one another and must protect the materials

they are used to clean. For further information on decon-

tamination in Healthcare Environments, please refer to ‘The

National Institute for Clinical Excellence’ guidelines on Infec-

tion Control www.nice.org.uk/CG002 and your local infection

control policy.

Cleaning covers

(Removal of contaminants such as dust and organic matter)

▸ Remove all covers for laundering.

▸ Launder the covers with the recommended temperature between

60 and 80 °C using a diluted detergent solution

(Instructions on label).

!

IMPORTANT

Washing at higher temperatures may cause shrinkage.

Drying covers

▸ Hang mattress covers from a line or bar and drip dry in a clean

indoor environment.

or

▸ Tumble dry on a low heat setting.

!

IMPORTANT

▸ Tumble dry setting must not exceed 40 °C.

▸ Do not tumble dry for longer than 10 minutes.

▸ Dry covers thoroughly before re-fitting to the mattress.

Softform

®

Premier Active 2 Mattresses After-Use

14

Disinfecting covers

(Reducing the number of microorganisms)

Please contact your hygiene specialist in the event of contamination.

!

IMPORTANT

Ensure that any residual detergent has been removed prior to

disinfection.

Light soilage

▸ Wipe down the cover with a 0.1% Chlorine Solution (1,000 ppm).

▸ Rinse the cover with clean water using a single use nonabrasive cloth.

▸ Dry the cover thoroughly.

Heavy soilage

Where the mattress is badly soiled, we recommend cleaning with a

dilute cleaning solution at 80 °C in the washing machine.

!

IMPORTANT

1% Chlorine Solution used on a regular basis can diminish the

life of the cover if not rinsed and dried properly.

▸ Do not use granules.

▸ Clean up all spillages of bodily uids i.e. blood, urine, faeces, sputum,

wound exudater and all other bodily secretions as soon as possible

using a 1% Chlorine Solution (10,000 ppm).

i

Large spillages of blood should be absorbed and removed with

paper towels rst and followed by as above.

▸ Rinse the cover with clean water using a single use nonabrasive cloth,

and thoroughly dried.

!

IMPORTANT

Polyurethane coated fabrics can absorb liquids for short

periods causing a temporary change to the polyurethane

characteristics. The mattress cover swells temporarily and is

more vulnerable to physical damage for a period after it is

completely surface dried, by which time it will revert to its

previous state.

▸ Dry the cover thoroughly.



WARNING

▸ Remove contaminated foams from use.



CAUTION

▸ Keep clear of open heat sources.

!

IMPORTANT

▸ Do not use phenols, alcohols, bleaches, or other abrasive

materials.

Change covers

▸ Unzip the cover and remove it carefully from the foam core.

!

IMPORTANT

▸ Ensure that the corners of the foam core are positioned

correctly into the corners of the cover. Ensure that the

profiled side of the foam is facing uppermost when packed

into its cover.

▸ Then close the zipper.

7 After-Use

7.1 Storage

!

IMPORTANT

▸ Store mattresses in a dry environment.

▸ Store mattresses within a protective cover.

▸ Store items in a flat state on clean, dry, off-flooring free from

sharp edges to avoid any possible damage.

▸ Never store other items on top of a mattress.

▸ Do not store mattresses next to radiators or other heating

devices.

Softform

®

Premier Active 2 MattressesTroubleshooting

15

7.2 Re-Use

A cleaning record must be kept as part of the cleaning system.

The product is suitable for repeated use. The number of times it can be

used depends on how often and in which way the product is used.

▸ Before reuse, clean the product thoroughly, see chapter 6.2, page 13.

7.3 Disposal

The disposal and recycling of used devices and packaging must comply

with the applicable legal regulation.

8 Troubleshooting

Problem / Alarm Cause Solution

Mattress not inating

(not alternating properly).

Mattress hose disconnected. Connect hose connectors, lock them in place.

Air hose kinked or split. Unkink or replace split hose.

Major leak in air cell. Replace leaking air cell.

Has power and fuse is good, control unit does not come on. Send control unit back to factory for repair.

Not alternating, rotor malfunction. Send control unit back to factory for repair.

No air (pump malfunction). Send control unit back to factory for repair.

No power.

Control unit off. Check power source, turn unit on.

Power cord disconnected. Connect power cord and the power source is on.

No power in the power source. Check the power source has power and turn it on.

Power outage. Wait till the power source has power.

Control unit switched on but no power to unit, fuse blown. Consult engineer, refer to service manual.

Softform

®

Premier Active 2 Mattresses Technical Data

16

9 Technical Data

9.1 General Data

Product Warranty

1)

Firetesting Grade ref &

Colour

Nominal

density ran-

ge [kg/m

3

]

Nominal

hardness

range [N]

Maximum

user weight

[kg]

Weight of

product

[kg]

2)

SOFTFORM

®

PREMIER ACTIVE 2

Cover: 4 years

Foam: 8 years

EN 597-1, 2

BS 7177: Crib 5

RX 39/120 Pink

RX 39/200 Blue

38 – 40

105 – 135

180 – 200

247.6 14

1)

Warranty is against manufacturing defects.

2)

Based on the weight of a standard size mattress. This can change if different sizes are ordered.

9.2 Pump Unit

Main Supply 220 / 240 V AC, 50 Hz

Rated Input Current 1 A

Supply Fuse 1 A

Noise Level < 32 dB

Classication Class 2 Type BF

Cycle Time 10 min

Size 237 mm x 205 mm x 80 mm

Weight 1.75 kg

Air Flow 4 l/min

Operating Pressure 60 mmHg (8 kPa)

Power 10 W

Warranty on pump 24 months

Warranty on air cell insert 24 months

Inhaltsverzeichnis

deutsch

1 Allgemeines 18

1.1 Allgemeine Informationen 18

1.2 Symbole 18

1.3 Symbole im Überblick 18

1.4 Garantie 18

1.5 Bestimmungsgemäße Verwendung 19

1.6 Produktbeschreibung 20

1.7 Produktlebensdauer 20

2 Sicherheit 20

2.1 Sicherheitsinformationen 20

3 Einrichtung and Installation 21

3.1 Sicherheitsinformationen 21

3.2 Einstellen des Systems 22

4 Benutzen 23

4.1 Sicherheitsinformationen 23

4.2 Vorgehen bei Herz-Lungen-Wiederbelebung

(HLW) 23

4.3 Pumpen-Software-Übersicht 24

4.4 Menü-Anzeige Pumpenaggregat 25

5 Transport 27

5.1 Sicherheitsinformationen 27

5.2 Transportmodus 27

6 Wartung 27

6.1 Inspektion 27

6.2 Reinigung und Pege 27

7 Nach dem Gebrauch 29

7.1 Lagerung 29

7.2 Wiederverwendung 29

7.3 Entsorgung 29

8 Störungen beheben 30

9 Technische Daten 31

9.1 Allgemeine Daten 31

9.2 Pumpenaggregat 31

Softform

®

Premier Active 2 Anti-Dekubitus Matratzen Allgemeines

18

1 Allgemeines

1.1 Allgemeine Informationen

Eine hochwertige Pege ist für die Dekubitusprophylaxe und

-therapie von entscheidender Bedeutung. Zum Erfolg eines entspre-

chenden Pegeplans leisten Softform

®

Premier Active 2-Matratzen

einen wichtigen Beitrag.

Ausbildung, klinisches Urteilsvermögen und Maßnahmenplanung

entsprechend den Gegebenheiten sind zentrale Erfolgsfaktoren für die

Dekubitusprophylaxe und -therapie.

Als formale Methode zur Beurteilung des Risikos für die Entwicklung

eines Dekubitus kann eine Reihe von Beurteilungsskalen (z. B. Braden-

skala etc.) dienen. Diese müssen gemeinsam mit informeller Beur-

teilung (Beurteilung durch qualiziertes Pegepersonal) Anwendung

nden. Die informelle Beurteilung wird als wichtiger erachtet und stellt

den höheren klinischen Wert dar.

Beachten Sie alle Hinweise, besonders die Sicherheitsinformationen,

und handeln Sie danach.

Weitere Informationen zu der Invacare

®

Softform

®

Premier Active 2

Matratze nden Sie in der Invacare

®

Softform

®

Broschüre, Kontaktad-

ressen auf der Rückseite dieser Gebrauchsanweisung.

1.2 Symbole

Warnungen

Warnungen sind in dieser Gebrauchsanweisung mit Symbolen gekenn-

zeichnet. Die Warnsymbole sind neben einer Überschrift abgebildet, die

auf die Gefährlichkeit hinweist.



WARNUNG

Weist auf eine gefährliche Situation hin, die bei Nichtbeach-

tung zu schweren Verletzungen oder zum Tod führen kann.



VORSICHT

Weist auf eine gefährliche Situation hin, die bei Nichtbeach-

tung zu leichten Verletzungen führen kann.

!

WICHTIG

Weist auf eine gefährliche Situation hin, die bei Nichtbeach-

tung zu Sachschäden führen kann.

Tipps und Empfehlungen

i

Nützliche Tipps, Empfehlungen und Informationen für eine

efziente und reibungslose Verwendung.

1.3 Symbole im Überblick

Nicht stechen

oder schneiden

Auf Leine

trocknen

Nicht chemisch

reinigen

Konformi-

tätserklärung

Von offenem

Feuer fernhalten

80°

80 °C

empfohlen

247.6 kg

Maximales

Benutzergewicht

247 kg

Nicht bügeln

Nicht bleichen Wäsche-

trockner bei

geringer

Temperatur

1.4 Garantie

Wir gewähren für das Produkt eine Herstellergarantie gemäß unseren

Allgemeinen Geschäftsbedingungen. Garantieansprüche können aus-

schließlich über den jeweiligen Fachhändler geltend gemacht werden.

Softform

®

Premier Active 2 Anti-Dekubitus MatratzenAllgemeines

19

Allgemeine Bedingungen von Invacare

®

Invacare

®

übernimmt die Garantie für Ihre Softform

®

Premier

Active 2

Matratze für den, in der Tabelle „Technische Daten“ dieser Gebrauchs-

anweisung, genannten Zeitraum.

Die Garantie für Ihr Invacare

®

Softform

®

Produkt ist ab dem Zeitpunkt

des Versands gültig.

Wird ein Mangel oder ein Fehler entdeckt, ist der Invacare

®

-Händler

oder der örtliche Vertriebsbeauftragte, bei dem das Produkt bezogen

wurde, unverzüglich zu informieren.

Der Hersteller übernimmt keine Verantwortung für Schäden infolge

falscher Verwendung oder Nichtbeachtung der in dieser Gebrauchsan-

weisung aufgeführten Anleitungen.

Während des Garantiezeitraums werden alle Produkte, die Mängel

infolge von Herstellungs- oder Materialfehlern aufweisen, kostenlos

ausgetauscht.

Die Garantie verfällt, wenn am Produkt nicht autorisierte Änderungen

vorgenommen werden.

Sowohl die Garantie als auch die Bescheinigung der Schwerentamm-

barkeit verfallen, wenn mit Invacare

®

Softform

®

Premier

Active 2

Matratzen Ersatzteile von anderen Herstellern als Invacare

®

verwendet

werden.

Die gesetzlichen Ansprüche des Käufers im Rahmen des Verbraucher-

schutzes sind davon nicht betroffen.

Qualität und Schwerentammbarkeit

Qualität ist für das Unternehmen entscheidend, alle Abläufe sind nach

den Normen ISO 9001 und ISO 13485 ausgerichtet.

Alle Invacare

®

Softform

®

Premier

Active 2 Matratzen tragen die CE-

Kennzeichnung in Übereinstimmung mit der Richtlinie über Medizin-

produkte.

Der Schaumstoff und die Bezüge, aus dem die Invacare

®

Softform

®

Premier

Active 2 Matratzen hergestellt werden, wurde in unabhängigen

Tests gemäß EN 597-1 und EN 597-2 geprüft und zertiziert.

Die Pumpe wurde gemäß EC-Direktive 89/336/EEC, BS EN 55022 und

EN 61001-1, 2 geprüft. Hergestellt gemäß EN 60601-1.

Bitte wenden sie sich für weitere Informationen an die entsprechende

Invacare

®

-Niederlassung ihres Landes (Kontaktadressen nden sie auf

der Rückseite dieser Gebrauchsanweisung).

1.5 Bestimmungsgemäße Verwendung

Diese Druckverteilungsmatratze und das Pumpenaggregat sind zur

Verwendung mit einem Bettrahmen entsprechender Größe und in Ver-

bindung mit einem Gesamtpegeprogramm zur Dekubitusprophylaxe

und -therapie bestimmt.

Sie können die Anti-Dekubitus-Matratze im statischen Betrieb (ohne

aktivem Wechseldrucksystem) sicher zur statischen Druckverteilung

oder im dynamischen Betrieb (mit aktivem Wechseldrucksytem) ver-

wenden, wenn dies erforderlich ist.

Dieses Produkt wurde im Hinblick auf eine wirksame Druckentlastung

für Patienten bei normalem Gebrauch entwickelt. Invacare

®

betrachtet

es als einen normalen Gebrauch, wenn die Liegeäche der Matratze mit

einem Bettlaken aus Baumwolle, Baumwollmischgewebe oder Leinen

bezogen ist und zwischen der Liegeäche der Matratze und dem Benut-

zer kein anderer Gegenstand als ein solches Laken liegt.

Die Invacare

®

Softform

®

Premier Active 2 Anti-Dekubitus-Matratze ist

mit aktiver Wechseldruckeinheit für die Dekubitusprophylaxe und -the-

rapieeinsatz bis einschließlich Grad bzw. Kategorie IV nach EPUAP (Eu-

ropean Pressure Ulcer Advisory Panel) entwickelt. Wird die Invacare

®

Softform

®

Premier Active 2 Anti-Dekubitus-Matratze ohne aktiver

Wechseldruckeinheit betrieben, ist die Matratze bis einschließlich Grad

bzw. Kategorie III nach EPUAP (European Pressure Ulcer Advisory

Panel) einsetzbar. Kontraindikationen sind nicht bekannt. Die Invacare

®

Softform

®

Premier Active 2 Matratze ist für den Einsatz in Pegebetten

vorgesehen. Bitte beachten Sie die entsprechenden Vorgaben gemäß

DIN EN 1970 und DIN EN 60601-2-38.

Softform

®

Premier Active 2 Anti-Dekubitus Matratzen Sicherheit

20

1.6 Produktbeschreibung

Das Softform

®

Premier Active 2-Anti-Dekubitus-Matratze dient als

statische Druckverteilungsunterlage/-matratze für Hochrisiko-Patienten,

die durch Inbetriebnahme des Pumpenaggregats über ein effektives

Wechseldrucksystem verfügt, sollte der Zustand des Patienten eine

Wechseldruck-Therapie erfordern.

Der wasserabweisende Bezug bietet eine wasserdampfdurchlässige

Stretchoberäche zur Erhöhung des Patientenkomforts und für eine

optimale Wirksamkeit des Schaumstoffkerns.

Das vollständige System besteht aus:

Einem zwei-schichtigen Schaumstoffmatratzenkern,

einem Wechseldruckzellensystem (zwischen den zweischichtigen

Schaumstoffmatratzenkern gelagert),

Anschlussschläuchen,

einem Pumpenaggregat mit einem Mikroprozessor,

einem Inkontinenz-PU-Vollbezug (atmungsaktiv, wasserundurchlässig,

bielastisch)

und ein 5 m-langes Stromkabel.

1.7 Produktlebensdauer

Die Nutzungsdauer dieser Produkte beträgt schätzungsweise fünf

Jahre, vorausgesetzt, sie werden streng in Übereinstimmung mit dem

in diesem Handbuch beschriebenen Einsatzzweck verwendet und alle

Wartungs- und Serviceanforderungen werden erfüllt. Bei sorgfältigem

Umgang und ordnungsgemäßer Pege sowie unter der Voraussetzung,

dass technische und wissenschaftliche Fortschritte nicht zu technischen

Einschränkungen führen, kann das Produkt länger genutzt werden.

Durch hohe Beanspruchung oder falschen Umgang oder falsche Wie-

deraufbereitung kann sich die Nutzungsdauer auch reduzieren.

Die Tatsache, dass wir für diese Produkte eine erwartete Lebensdauer

angeben, begründet keine zusätzliche Garantie.

2 Sicherheit

2.1 Sicherheitsinformationen



WARNUNG

▸ Verwenden Sie dieses Produkt oder möglicherweise

vorhandenes Zubehör erst nachdem Sie diese Anweisun-

gen und mögliches zusätzliches Anweisungsmaterial, wie

zu dem Produkt oder dem möglichen Zubehör gehörende

Gebrauchsanweisung, Servicehandbücher oder Merkblätter,

vollständig gelesen und verstanden haben. Invacare-Bedie-

nungsanleitungen erhalten Sie unter www.invacare.de oder

bei Ihrem Händler vor Ort. Falls die Warnungen, Sicher-

heitshinweise und Anweisungen unverständlich sind, wenden

Sie sich bitte an den zuständigen Händler, bevor Sie die

Ausrüstung verwenden. Andernfalls kann es zu Verletzungen

und Sachschäden kommen.



WARNUNG

Die Konstruktion und die Herstellung der Invacare

®

-Produkte

sind so speziell, dass ausschließlich Invacare

®

-Zubehör ver-

wendet werden darf. Zubehörteile von anderen Herstellern

sind nicht von Invacare

®

getestet worden und werden für die

Verwendung mit Invacare

®

-Produkten nicht empfohlen.

Der Gebrauch von bestimmten Drittanbieterprodukten

zwischen der Matratzenoberäche und dem Patienten kann

die klinische Wirksamkeit dieses Produkts reduzieren oder

verhindern.

Der Begriff „Drittanbieterprodukte“ kann Matratzenauagen,

Kunststofffolien, Schaffell usw. beinhalten, ist jedoch nicht

darauf beschränkt. Beheizbare Bettlaken dürfen nur in Abspra-

che mit einer medizinisch ausreichend qualizierten Person

verwendet werden, da ein Temperaturanstieg das Risiko von

Dekubitus erhöhen kann.

La pagina si sta caricando...

Invacare Softform Premier Active 2 Manuale utente

Invacare Softform Premier Active 2 Manuale utente

in altre lingue

Documenti correlati

Altri documenti