Montageanleitung für Rudermaschine „COACH E”
Art.-Nr. 07975-160
D
GB
F
NL
E
I
PL
CZ
P
DK
RUS
SLO
Abb. ähnlich
Auf 100% Altpapier gedruckt!
A 206cm
B 52cm
C 67cm
47 kg
max.
130 kg
30 Min.
A
C
B
4
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.
For Your Safety
RISK! While assembly of the product keep off children’s reach
(Choking hazard - contains small parts).
RISK! The device requires a supply voltage of 230V, 50 Hz.
– Connect the power cord with a protective contact socket.
RISK! Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for da-
mage or injury caused by improper use of the equipment.
RISK! Instruct people using the equipment (in particular chil-
dren) on possible sources of danger during exercising.
RISK! Do not under any circumstances carry out electrical re-
pairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
RISK! disconnect the apparatus from the mains before doing
repair, maintenance or cleaning work.
RISK! Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the
safety of the user.
RISK! Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
RISK! All electric appliances emit electromagnetic radiation
when in operation. Please do not leave especially radiation-in-
tensive appliances (e.g. mobile telephones) directly next to the
cockpit or the electronic controlsystem as otherwise values dis-
played might be distorted (e.g. pulse measurement.
RISK! Ensure that the power cable is not pinched and that no-
one can trip over it.
WARNING! The training device should be used only for its in-
tended purpose, i.e. for physical exercise by adult people.
WARNING! Before beginning your program of training, study
the instructions for training carefully.
WARNING! Any interference with parts of the product that
are not described within the manual may cause damage, or en-
danger the person using this machine. Extensive repairs must
only be carried out by KETTLER service staff or qualified per-
sonnel trained by KETTLER.
WARNING! This training device is for home use only.
WARNING! If you lose the pulse signal, the performance of
the device will remain constant for approx. 60 seconds and is
then slowly adjusted downwards. Please check your pulse mea-
suring system (ear clip, hand pulse or chest belt) so that the
pulse signal of the electronics can be entered again.
■ The training device has been designed in accordance with the
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
latest standards of safety. Any features which may have been
a possible cause of injury have been avoided or made as safe
as possible.
■ The training device corresponds with DIN EN 957 -1/-7, class
HA. It is therefore unsuitable for therapeutic use.
■ In case of enquiry, please contact your KETTLER dealer.
■ If the equipment is in regular use, check all its components tho-
roughly every 1–2 months. Pay particular attention to the tight-
ness of bolts and nuts. This is particularly true for the attachment
of grip strap, running plate and fastening of the handlebar and
front tube.
■ Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■ Always wear suitable shoes when using.
■ Our products are subject to a constant innovative quality as-
surance. We reserve the right to perform technical modificati-
ons.
■ In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors). The safety distance surrounding must ex-
tend at least 1 meter further than the practice area.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.
■ Unplug the power cord of the device from the socket if not used
for a longer period.
■ Nobody may be in the moving range of a training person du-
ring training
■ This exercise machine may only be used for exercises indica-
ted in the training instructions.
■ This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it to
deaden any noise or impacts. Only for appliances with
weights. Avoid powerful oscillations of the dumbbells!
■ When mounting the product please take the recommended tor-
que information into account (M = xx Nm).
Instructions for Assembly
RISK! Ensure that your working area is free of possible sources
of danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
WARNING! Please note that there is always a danger of injury
when working with tools or doing manual work. Therefore
please be careful when assembling this machine.
!
!
■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
Important Instructions
GB
5
sible technically talented.
■ The fastening material required for each assembly step is
shown in the diagram inset. Use the fastening material exactly
as instructed.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
■ For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
Handling the equipment
■ Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.
■ This Rowing machine is an exercise machine that works de-
pendent from stroke sequence (speed).
■ The training device has a magnetic brake system.
■ To operate correctly, the pulse function requires a minimum vol-
tage of 2,7 volts (only for computers working with batteries).
■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
Care and Maintenance
■ Damaged components may endanger your safety or reduce
the lifetime of the equipment. For this reason, worn or dama-
ged parts should be replaced immediately and the equipment
taken out of use until this has been done. Use only original
KETTLER spare parts.
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
■ Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
■ Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
List of spare parts page 34-36
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07975-160 / spare-part no. 94317661/
2 pieces / S/N .................... Please keep original packaging of
this article, so that it may be used for transport at a later date, if
necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect des-
cription / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material“.
Waste Disposal
KETTLER products are recyclable. At the end of its use-
ful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
GB
+44 1527 591901
+44 1527 62423
sales@kettler.co.uke-mail:
KETTLER International Inc.
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
USA
+1 888 253 8853
+1 888 222 9333
sales@kettler.co.uke-mail:
GB
26
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
M5x40
M8x40
M8
ø22
ø16
ø12
M6
M5
ø3,9x13
M5x40
– GB – Measuring help for screw connections
– F – Gabarit pour système de serrae
– NL – Meethulp voor schroefmateraal
– E – Ayuda para la medición del material de atornilladura
– I – Misura per materiale di avvitamento
– PL – Wzornik do połączeń śrubowych
– CZ – Měřící pomůcka pro materiál k přišroubování
– P – Auxiliar de medição para materiais de aparafusamento
– DK – Hjælp til måling af skruer
– RUS – Справка по определению размеров крепежных
материалов
– SLO – Merilni pripomoček za vijačni material
Messhilfe für Verschraubungsmaterial
Beispiel Examples Examples Voorbeeld Ejemplos
Esempio Przykłod Příklad Exemplo Eksempel
Примеры Primer
– GB – Checklist (contents of packaging)
– F – Liste de vérification (contenu de l’emballage)
– NL – Checklijst (verpakkingsinhoud)
– E – Lista de control (contenido del paquete)
– I – Lista di controllo (contenuto del pacco)
– PL – Lista kontrolna (zawartość opakowania)
– CZ – Kontrolní seznam (obsah balení)
– P – Lista de verificação (conteúdo da embalagem)
– DK – Checkliste (pakkens indhold)
– RUS – Контрольный список
– SLO – Kontrolni seznam (vsebina embalaže)
Checkliste (Packungsinhalt)
– D – Benötigtes Werkzeug – Gehört nicht zum Lieferumfang.
– GB – Tools required – Not included.
– F – Outils nécessaires – Ne fait pas partie du domaine de livraison.
– NL – Benodigd gereedschap – Is niet bij de levering inbegrepen.
– E – Herramientas necesarias – No forma parte del volumen de entrega.
– I – Strumenti necessari – Non in dotazione alla fornitura.
– PL – Narzędzi – Nie należy do zakresu dostawy.
– CZ – Nářadí potřebné – Nepatří do rozsahu dodávky
– P – Ferramentas necessárias – Não está incluído nas peças fornecidas
– DK – Værktøjer kræves – Er ikke inkluderet i leveringsomfanget.
– RUS – Необходимый инструмент - не включены.
– SLO – Potrebna orodja – niso vključeni.
ø13x308 mm
1
ø13x410 mm
1
1
2
ø46 mm
27
Checkliste (Packungsinhalt)
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
28
Checkliste (Packungsinhalt)
ø16x122,5 mm
1
ø16x40 mm
2
ø16x9 mm
2
Actual Size
1
M8x140
2
M8x70
5
M8
3
ø16x8,3x2
4
ø25x8,4x3
1
2
3,9x13
ø16x115 mm
2
2
3,9x16
29
21
2x
3,9x16
2x
M8x70 mm ø25x8,4 mm
M = 10 Nm
!
30
3
4
2x
3,9x13
1x
M8 ø16 115mm ø13x308mm 115mm ø16 M8
31
5
6
1x
M8 ø25 40mm ø13x410mm 40mm ø25 M8
R
L
L
R
32
Handhabungshinweise
– GB – Handling – F – Utilisation – NL – Handleiding
– E – Aplicación – I – Utilizzo – PL – Zastosowanie
– CZ – Pokyny k manipulaci – P – Notas sobre o manuseamento – DK – Håndtering
– RUS – Указания по обращению – SLO –Napotki za ravnanje
7
A
1x
ø16x9•ø16x122,5•ø16x9
A
C
M8x140 ø16x8,3 M8
C
1x
B
33
Handhabungshinweise
–D – Achtung! Betrieb nur mit mitgeliefertem Original-Netzteil
oder Original-KETTLER-Ersatzteil (siehe Ersatzteilliste) zuläs-
sig. Ansonsten Gefahr der Beschädigung.
– GB – Attention! Only use with original power unit as supplied, or
with original KETTLER spare part (see spare part list). Other-
wise this may result in damage.
– F – Attention ! Exploiter uniquement l’appareil avec son bloc sec-
teur original qui fait partie de la fourniture ou une pièce de
rechange originale de KETTLER (voir liste des pièces de re-
change). Sinon risque de détérioration.
– NL – Let op! Gebruik alleen toegestaan met de bijgeleverde orgi-
nele transformator of orgineel KETTLER-onderdeel (zie onder-
delenlijst). Anders gevaar voor beschadiging.
– E – ¡Atención! Funcionamiento solamente autorizado con la fu-
ente de alimentación original suministrada o con pieza de re-
cambio original de KETTLER (ver lista de piezas de recambio).
De lo contrario podría ocasionar daños.
– I – Attenzione! L’utilizzo è consentito soltanto con l’alimentatore
originale fornito in dotazione oppure con parte di ricambio
originale della KETTLER (vedasi lista delle parti di ricambio).
Altrimenti sussiste il rischio di danneggiamenti.
– P – Uwaga! Eksploatacja urządzenia jest możliwa tylko z do-
starczonym oryginalnym zasilaczem lub z oryginalnym
urządzeniem zastępczym marki KETTLER (patrz Lista części za-
miennych). W przeciwnym razie istnieje ryzyko uszkodzenia.
– CZ – U přístrojů se síťovým zdrojem: Pozor! Provoz je přípustný
pouze s originálním síťovým zdrojem obsaženým v dodávce
nebo originálním náhradním dílem od firmy KETTLER (viz sez-
nam náhradních dílů). Jinak vzniká nebezpečí poškození.
– P – Em aparelhos com cabo: Atenção! O funcionamento só é
permitido com o cabo original fornecido ou com a peça so-
bressalente original KETTLER (ver lista de peças sobressalen-
tes). Caso contrário, perigo de danos.
– DK– Maskiner med netdel: OBS! Det er kun tilladt at bruge den
medleverede originale netdel eller den originale reservedel
fra KETTLER (se reservedelslisten). I modsat fald kan maski-
nen beskadiges.
– RUS – Для устройств с блоком питания: ВНИМАНИЕ!
Разрешается эксплуатация только с использованием
оригинального блока питания, входящего в
комплект поставки, или оригинальной запасной
части KETTLER (см. список запчастей). В противном
случае существует опасность повреждения.
– SLO – Pri napravah z električnim napajalnikom: POZOR! Obrato-
vanje je dovoljeno le s priloženim originalnim električnim na-
pajalnikom ali originalnim nadomestnim delom KETTLER
(glejte seznam nadomestnih delov). V nasprotnem obstaja
nevarnost poškodb.
–D – Achtung! Falls der Sitz des Rudergerätes schwergängig ist,
bitte Schraube (A) etwas lösen, Sitz etwas nach oben ziehen
(B) und dabei Schraube (A) wieder fest anziehen.
– GB – Caution! If the seat of the rowing machine is stiff, please loo-
sen the screw (A) slightly, pull the seat a little upwards (B)
and, while doing so, tighten the screw (A) again.
– F – Attention! Si la siège du rameur se déplace difficilement, des-
serrez la vis (A) légèrement, tirez la siège un peu verse le
haut (B) et resserrez la vis (A).
– NL – Opgelet! Indien de zitting van het roeiapparaat stroef is,
draait u schroef (A) los, trekt de zitting iets naar boven (B) en
draait vervolgens schroef (A) weer stevig vast.
– E – ¡Atención! Si el asiento de la máquina de remar marcha de-
masiado duro, suelte levemente el tornillo (A), tire el asiento
un poco hacia arriba (B) y al mismo tiempo apriete de nuevo
el tornillo (A).
– I – Attenzione! Se la sede del timone è rigida, allentare legger-
mente la vite (A), sollevare leggermente la sede verso l’alto
(B) e poi serrare di nuovo la vite (A).
– PL – Uwaga! Jeżeli siedzenie urządzenia do wiosłowania po-
rusza się zbyt ciężko, proszę poluzować co nieco śrubę (A),
pociągnąć siedzenie trochę do góry (B) i przy tym ponownie
mocno dokręcić śrubę (A).
– CZ – Pozor! Jestliže sedadlo veslovacího trenažéru funguje ztuha,
prosím povolte trošku šroub (A), povytáhněte sedadlo trošku
směrem nahoru (B) a přitom opět pevně dotáhněte šroub (A).
– P – Atenção! Se o banco da máquina de remar tiver pouca mo-
bilidade, solte um pouco o parafuso (A), puxe o banco ligei-
ramente para cima (B) apertando novamente o parafuso (A).
– DK– OBS! Løsn skruen (A) lidt, hvis romaskinen går trægt, træk
sadlen lidt opad (B) og spænd skruen (A) igen.
– RUS – Внимание! Если сиденье гребного тренажера
двигается с трудом, ослабьте немного болт (А),
приподнимите сиденье (В) и при этом закрепите
болт (А) снова.
– SLO – Pozor! Če se sedež vadbene naprave za veslanje težko pre-
mika, rahlo odvijte vijak (A), povlecite sedež malce navzgor
(B) in nato vijak (A) ponovno pritegnite.
B
A
34
07975-160
RUDERMASCHINE
COACH E
1 1x 10100092
2 2x 98585016
3 1x 98585018
4 1x 94602281
5 1x 42860019
6 2x 91170742
7 2x 67000670
8 1x 94318507
9 1x 67001002
10 1x 94317665
11 1x 10121163
12 1x 94602285
13 1x 70121663
14 1x 94602270
15 1x 94317497
16 1x 70125960
17 1x 94602296
18 1x 94602295
19 1x 94317500
20 2x 10100009
21 2x 10122073
22 1x 70125961
07975-160
RUDERMASCHINE
COACH E
23 1x 94602275
24 1x 94318045
25 4x 94317389
26 1x 72591160
27 1x 94602294
28 1x 94317660
29 1x 94602271
30 1x 94602292
31 1x 94602293
32 2x 42108006
33 1x 67002000
34 1x 94317666
35 1x 42860015
36 1x –
37 2x 98585083
38 1x 94602279
39 1x 94602282
40 1x 94602283
41 1x 13300034
42 1x 10123059
43 1x 94317668
44 1x 94317661
– GB – Spare parts order
– F – Commande de pièces de rechange
– NL – Bestelling van reserveonderdelen
– E – Pedido de recambios
– I – Ordine di pezzi di ricambio
– PL – Zamówiene części zamiennych
– CZ – Objednání náhradních dílů
– P – Encomenda de peças sobressalentes
– DK – Bestilling af reservedele
– RUS – Заказ запчастей
– SLO – Načrt nadomestnih delov
Ersatzteilbestellung
35
Ersatzteilbestellung
35
36
33
43
USA
–D – Beispiel Typenschild - Seriennummer
– GB – Example Type label - Serial number
–F – Example Plaque signalétique - Numèro
de serie
–NL – Bij voorbeeld Typeplaatje - Seriennum-
mer
–E – Ejemplo Placa identificativa - Número de
serie
–I – Esempio Targhetta tecnica - Numero di
serie
– PL – Przyklady Tabliczka identyfikacyjna -
Numer serii
– CZ – Přiklad typového štítku – sériové číslo
–P – Exemplo placa de características - número de série
– DK – Eksempel type label – serienummer
– RUS – Пример заводской таблички с серийным номером
– SLO – Primer tipske ploščice – serijske številke
–D – Geben Sie bei Ersatzteilbestellungen bitte die vollständige Ar-
tikelnummer, die Ersatzteilnummer, die benötigte Stückzahl
und die Seriennummer des Gerätes an.
– GB – When ordering spare parts, always state the full article num-
ber, spare-part number, the quantity required and theS/N of
the product.
–F – En cas de commande de pièces de rechange, nous vous pri-
ons de mentionner la référence article, le numéro de pièce de
rechange, la quantité demandée et le numéro de série de
l’appareil.
–NL – Vermeld bij de onderdelenbestellingen a.u.b. het volledige ar-
tikelnummer, het onderdeelnummer, het benodigde aantal en
het serienummer van het apparaat.
–E – Indicar con los pedidos de piezas de repuesto el número com-
pleto del artículo, el número de la pieza de repuesto, las uni-
dades solicitadas y el número de serie del aparato.
–I – Per l’ordinazione di parti di ricambio indicate il completo nu-
mero di articolo, della parte di ricambio, il numero di unit ne-
cessario nonchè il numero di serie dell’apparecchio.
– PL – Przy zamawianiu części zamiennych proszę podawać kom-
pletny numer artykułu, numer części zamiennej i numer serii
urządzenia.
– CZ – Při objednání náhradních dílů prosím udejte úplné číslo zboží,
číslo náhradního dílu, potřebný počet kusů a sériové číslo
přístroje.
–P – Ao encomendar peças sobressalentes, por favor indique o nú-
mero completo do artigo, o número da peça sobressalente, o
número de unidades necessárias e o número de série do apa-
relho.
– DK – Ved bestilling af reservedele skal du altid opgive det fuldstæn-
dige artikelnummer, nummeret på reservedelen, det ønskede
antal og maskinens serienummer (se Håndtering).
– RUS – Оформляя заказ на запчасти, указывайте полный
артикульный номер, номер запасной детали,
необходимое количество и серийный номер устройства.
– SLO – Pri naročanju nadomestnih delov Vas prosimo, da navedete
popolno številko artikla, številko nadomestnega dela, po-
trebno količino nadomestnih delov in serijsko številko naprave
(glej ravnanje z napravo).
Ersatzteilbestellung
Zubehörbestellung
– GB – Accessories ordering
– F – La commande d'accessoires
– NL – Accessoires bestellen
– E – Para pedidos de accesorios
– I – L'ordine di accessori
– PL – Akcesoria zamawiania
– CZ – Příslušenství k objednání
– P – Acessórios ordenação
– DK – Tilbehør bestilling
– RUS – Заказ аксессуаров
– SLO – Dodatki naročanje
07937-600
07937-650
140x80 cm
07929-200
220x110 cm
07929-400
HEINZ KETTLER GmbH & Co. KG · Postfach 1020 · D-59463 Ense-Parsit
www.kettler.de
docu 3462a/07.13
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Kettler 07975-160 Manuale utente
- Tipo
- Manuale utente
in altre lingue
- English: Kettler 07975-160 User manual
Documenti correlati
-
Kettler COACH M Manuale del proprietario
-
-
-
-
-
-
-
-
-