AxelTech Fox 3 Manuale utente

USER MANUAL

axeltechnology.com

Fox 3

Digital Audio Changeover

(Rev. 1.2 ENG)

2

SUMMARY |

FOX 3 · User Manual · ENG

SUMMARY

SUMMARY 2

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA 4

UNPACKING AND INSPECTION 16

FIRST INSTALLATION RECOMMENDATIONS 17

DEVICE INSTALLATION 18

DEVICE GENERAL DESCRIPTION 20

1. FIRST DEVICE START 22

2. SUMMARY MASK 26

3. MENU 34

3.2.1 SOURCES 35

3.2.2 AUDIO SELECTOR 46

3.3.1 DIGITAL 1&2 48

3.3.2 ANALOG 49

3.3.3 STREAMING MONITOR 49

3.2.1 SOURCES 50

3.2.2 CHANGEOVER 56

3.2.3 STREAM ENCODER 57

3.3.1 USER CLASS – USER RIGHTS TO LOGIN THE SYSTEM 64

3.3.2 ADDING A NEW USER 66

3.3.3 REMOVING AN EXISTING USER. 66

3.4.1 GENERAL SETUP 68

3.4.2 NETWORK 70

3.4.3 NTP 76

3.4.4 SNMP 78

3.4.5 SMTP 79

3

SUMMARY |

FOX 3 · User Manual · ENG

3.4.6 GPIO 81

3.4.7 GPS 84

3.4.8 SYSTEM TOOLS 85

3.1.1 TO/FROM MEMORY ( SAVE/LOAD CONFIG. ) 91

3.2.1 USERS LOGS 92

3.2.2 EVENTS LOGS 92

3.2.3 NOTIFICATIONS LOGS 92

3.3.1 SETTINGS 93

4. TECHNICAL SPECS 94

5. WEEE DIRECTIVE – INFORMATIVA RAEE 98

6. WARRANTY 99

DECLARATION OF CONFORMITY – FOX 3 100

DICHIARAZIONE DI CONFORMITA’ – FOX 3 101

4

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |

FOX 3 · User Manual · ENG

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA

_____________________________________________________________________________________________________________________

SAFETY WARNINGS

CONSIGNES DE SÉCURITÉ IMPORTANTES

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

WICHTIGE SICHERHEITSHINWEISE

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

(Rel. 1.6)

_____________________________________________________________________________________________________________________

5

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | PREFACE

FOX 3 · User Manual · ENG

PREFACE

_____________________________________________________________________________________________________________________

For your own safety and to avoid invalidation of the warranty all text marked with these Warning Symbols should be read carefully.

all the texts marked with the Warning Symbols.

_____________________________________________________________________________________________________________________

Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.

The manufacturer shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this

manual, or through any misoperation or fault in hardware contained in the product.

It is recommended that all maintenance and service on the product should be carried out by the manufacturer or its authorised agents. The

manufacturer cannot accept any liability whatsoever for any loss or damage caused by service, maintenance, or repair by unauthorised

personnel

6

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |SAFETY WARNINGS

FOX 3 · User Manual · ENG

SAFETY WARNINGS

The installation and servicing instructions in this manual are for use by qualified personnel only.

Read All Instructions. All safety and operating instructions must be read before operating the product. They also must be retained for future

reference, as it contains several useful hints for determining the best combination of equipment settings for Yr particular application.

Heed All Warnings. All warnings on the product and those listed in the operating instructions must be adhered to.

Heat. This product must be situated away from any heat sources such as radiators or other products (including power amplifiers or

transmitters) that produce heat.

Power Sources. This product must be operated from the type of power source indicated on the marking label and in the installation

instructions. If you are not sure of the type of power supplied to your facility, consult your local power company. Make sure the AC main

voltage corresponds to that indicated in the technical specifications. If a different voltage (ex. 110/115 VAC) is available, open the equipment

closure and set the voltage switch on the main supply circuit, located behind the AC socket.

Power Cord Protection. Power supply cords must be routed so that they are not likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to the cords at AC wall plugs and convenience receptacles, and at the point where the cord plugs into

the product.

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

Lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods, unplug it

from the AC wall outlet and the audio connections. This will prevent damage to the product due to lightning and power-line surges.

Installation. Configuration and installation should only be carried out by a competent installation engineer.

Cabling. Using high-quality wires, well-protected. Make sure the cable is integrity.

7

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | SAFETY WARNINGS

FOX 3 · User Manual · ENG

This symbol alerts you to the presence of dangerous voltage inside the closure –

voltage that may be sufficient to constitute a risk of shock. Do not perform any

servicing other than that contained in the operating instructions. Refer all servicing

to qualified personnel.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

Do not change the voltage setting or replace the main fuse without first turning

the unit off and unplugging the main cord.

Make sure the AC main voltage corresponds to that indicated in the technical

specifications.

THIS APPARATUS MUST BE EARTHED!

To avoid the risk of fire use the correct value fuse, as indicated on the label stuck

on the right side of the unit.

This apparatus uses a single-pole main switch and does therefore not separate the

unit completely from the main power. To completely separate from the main

power (f.i. in the event of danger) unplug the power cord. As the main plug is

disconnected from the device, the disconnected device shall remain readily

operable.

8

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |CONSIGNES DE SÉCURITÉ IMPORTANTES

FOX 3 · User Manual · ENG

CONSIGNES DE SÉCURITÉ IMPORTANTES

Lire ces consignes.

Conserver ces consignes.

Observer tous les avertissements.

Suivre toutes les consignes.

Ne pas utiliser cet appareil à proximité de l’eau.

Ne pas obstruer les ouvertures de ventilation. Installer en respectant les consignes du fabricant.

Ne pas installer à proximité d'une source de chaleur telle qu'un radiateur, une bouche de chaleur, un poêle ou d'autres appareils (dont les

amplificateurs) produisant de la chaleur.

Ne pas annuler la sécurité de la fiche de terre, la troisième branche est destinée à la sécurité. Si la fiche fournie ne s'adapte pas à la prise

électrique, demander à un électricien de remplacer la prise hors normes.

Protéger le cordon d'alimentation afin que personne ne marche dessus et que rien ne le pince, en particulier aux fiches, aux prises de courant

et au point de sortie de l’appareil.

Utiliser uniquement les accessoires spécifiés par le fabricant.

Utiliser uniquement avec un chariot, un support ou une table spécifié par le fabricant ou vendu avec l’appareil. Si un chariot est utilisé, déplacer

l’ensemble chariot–appareil avec précaution afin de ne pas le renverser, ce qui pourrait entraîner des blessures.

Débrancher l’appareil pendant les orages ou quand il ne sera pas utilisé pendant longtemps.

Confier toute réparation à du personnel qualifié. Des réparations sont nécessaires si l’appareil est endommagé d’une façon quelconque, par

exemple: cordon ou prise d’alimentation endommagé, liquide renversé ou objet tombé à l’intérieur de l’appareil, exposition de l’appareil à la

pluie ou à l’humidité, appareil qui ne marche pas normalement ou que l’on a fait tomber.

NE PAS exposer cet appareil aux égouttures et aux éclaboussements. Ne pas poser des objets contenant de l'eau, comme des vases, sur

l'appareil.

9

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | CONSIGNES DE SÉCURITÉ IMPORTANTES

FOX 3 · User Manual · ENG

Ce symbole indique la présence d'une tension dangereuse dans l'appareil

constituant un risque de choc électrique.

Ce symbole indique que la documentation fournie avec l'appareil contient des

instructions d'utilisation et d'entretien importantes.

Avant de modifier le commutateur de changement de tension ou replacer le fusible il

faut débrancher l’appareil de la prise électrique. Pendant son usage, l’appareil doit etre

branchee à la prise de terre.

Utiliser le fusible principal AC avec le valeur qui est indiquée sur l'étiquette collée

sur le coffret.

Assurez-vous que la tension principale AC correspond à celle indiquée dans les

spécifications techniques.

L’interrupteur d’alimentation interrompt un pôle du réseau d’alimentation excepté le

conducteur de terre de protection. En cas de danger, debrancher le cordon

d'alimentation. Parce que la prise du réseau de alimentation est utilisée comme

dispositif de déconnexion, ce dispositif doit demeuré aisément accessible.

10

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |ISTRUZIONI IMPORTANTI PER LA SICUREZZA

FOX 3 · User Manual · ENG

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

Leggere le presenti istruzioni.

Conservare queste istruzioni.

Osservare tutte le avvertenze.

Seguire scrupolosamente tutte le istruzioni.

Non usare questo apparecchio in prossimità di acqua.

Non ostruire alcuna apertura per il raffreddamento. Installare l’apparecchio seguendo le istruzioni.

Non installare l'apparecchio accanto a fonti di calore quali radiatori, aperture per l'afflusso di aria calda, forni o altri apparecchi (amplificatori

inclusi) che generino calore.

Non rimuovere il terminale di connessione a terra sul cordone di alimentazione: esso ha lo scopo di tutelare l’incolumità dell’utilizzatore. Se la

spina in dotazione non si adatta alla presa di corrente, rivolgersi ad un elettricista per far eseguire le modifiche necessarie.

Evitare di calpestare il cavo di alimentazione o di comprimerlo, specialmente in corrispondenza della spina e del punto di inserzione

sull’apparato.

Utilizzare solo dispositivi di collegamento e gli accessori specificati dal produttore.

Utilizzare l’apparecchio solo con un carrello, un sostegno, una staffa o un tavolo di tipo specificato dal produttore o venduto insieme

all’apparecchio. Se si utilizza un carrello, fare attenzione negli spostamenti per evitare infortuni causati da ribaltamenti del carrello stesso.

Scollegare l’apparecchio dalla presa di corrente durante i temporali o quando inutilizzato a lungo.

Per qualsiasi intervento, rivolgersi a personale di assistenza qualificato. È’ necessario intervenire sull’apparecchio ogniqualvolta si verificano

danneggiamenti di qualsiasi natura. Ad esempio, la spina o il cavo di alimentazione sono danneggiati, è entrato liquido nell’apparecchio o sono

caduti oggetti su di esso, l’apparecchio è stato esposto alla pioggia o all’umidità, non funziona normalmente o è caduto.

Non esporre a sgocciolamenti o spruzzi. Non appoggiare sull'apparecchio oggetti pieni di liquidi, ad esempio vasi da fiori.

11

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | ISTRUZIONI IMPORTANTI PER LA SICUREZZA

FOX 3 · User Manual · ENG

Questo simbolo indica la presenza di alta tensione all'interno dell'apparecchio, che

comporta rischi di scossa elettrica.

Questo simbolo indica la presenza di istruzioni importanti per l'uso e la

manutenzione nella documentazione in dotazione all'apparecchio.

Non sostituire il fusibile o cambiare la tensione di alimentazione senza aver prima

scollegato il cordone di alimentazione. L’APPARATO DEVE ESSERE CONNESSO A TERRA.

Sostituire il fusibile generale con uno di identico valore, come indicato sulla etichetta

applicata sul mobile dell’apparato

Assicurarsi che la tensione di rete corrisponda a quella per la quale è configurato

l’apparecchio.

Questo apparato utilizza un interruttore di alimentazione di tipo unipolare e l’isolamento

dalla rete elettrica non è pertanto completo. Per ottenere un isolamento totale (ad

esempio in caso di pericolo), scollegare il cordone di alimentazione. Inoltre, poichè la spina

di alimentazione è utilizzata come dispositivo di sezionamento, essa deve restare

facilmente raggiungibile.

12

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |WICHTIGE SICHERHEITSHINWEISE

FOX 3 · User Manual · ENG

WICHTIGE SICHERHEITSHINWEISE

Diese Hinweise LESEN.

Diese Hinweise AUFHEBEN.

Alle Warnhinweise BEACHTEN.

Alle Anweisungen BEFOLGEN.

Dieses Gerät NICHT in der Nähe von Wasser verwenden.

KEINE Lüftungsöffnungen verdecken. Gemäß den Anweisungen des Herstellers einbauen.

Nicht in der Nähe von Wärmequellen, wie Heizkörpern, Raumheizungen, Herden oder anderen Geräten (einschließlich Verstärkern)

installieren, die Wärme erzeugen.

Die Schutzfunktion des Schukosteckers NICHT umgehen. Bei Steckern für die USA gibt es polarisierte Stecker, bei denen ein Leiter breiter als

der andere ist; US-Stecker mit Erdung verfügen über einen dritten Schutzleiter. Bei diesen Steckerausführungen dient der breitere Leiter bzw.

der Schutzleiter Ihrer Sicherheit. Wenn der mitgelieferte Stecker nicht in die Steckdose passt, einen Elektriker mit dem Austauschen der

veralteten Steckdose beauftragen.

VERHINDERN, dass das Netzkabel gequetscht oder darauf getreten wird, insbesondere im Bereich der Stecker, Netzsteckdosen und an der

Austrittsstelle vom Gerät.

NUR das vom Hersteller angegebene Zubehör und entsprechende Zusatzgeräte verwenden.

NUR in Verbindung mit einem vom Hersteller angegebenen oder mit dem Gerät verkauften Transportwagen, Stand, Stativ, Träger oder Tisch

verwenden. Wenn ein Transportwagen verwendet wird, beim Verschieben der Transportwagen-Geräte- Einheit vorsichtig vorgehen, um

Verletzungen durch Umkippen.

Das Netzkabel dieses Geräts während Gewittern oder bei längeren Stillstandszeiten aus der Steckdose ABZIEHEN.

Alle Reparatur- und Wartungsarbeiten von qualifiziertem Kundendienstpersonal DURCHFÜHREN LASSEN. Kundendienst ist erforderlich, wenn

das Gerät auf irgendwelche Weise beschädigt wurde, z.B. wenn das Netzkabel oder der Netzstecker beschädigt wurden, wenn Flüssigkeiten in

das Gerät verschüttet wurden oder Fremdkörper hineinfielen, wenn das Gerät Regen oder Feuchtigkeit ausgesetzt war, nicht normal

funktioniert oder fallen gelassen wurde.

Dieses Gerät vor Tropf- und Spritzwasser SCHÜTZEN. KEINE mit Wasser gefüllten Gegenstände wie zum Beispiel Vasen auf das Gerät STELLEN.

13

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | WICHTIGE SICHERHEITSHINWEISE

FOX 3 · User Manual · ENG

Dieses Symbol zeigt an, dass gefährliche Spannungswerte, die ein Stromschlagrisiko

darstellen, innerhalb dieses Geräts auftreten.

Dieses Symbol zeigt an, dass das diesem Gerät beiliegende Handbuch wichtige

Betriebs- und Wartungsanweisungen enthält.

Vor Änderung der Netzspannung oder Sicherungswechsel Netzkabel trennen.

Das Gerät muss für den Betrieb geerdet werden.

Hauptsicherung nur mit einer gleichwertigen austauschen

(s. entsprechende Etikette).

Vor Einschalten Netzspannungseinstellung am Gerät überprüfen bzw. anpassen.

Inpoliger Netzschalter. In Notfälle oder für Wartungsarbeiten Netzkabel

trennen. Der Netzstecker fungiert auch als Trennelement muss deshalb

zugänglich bleiben.

14

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA |INSTRUCCIONES IMPORTANTES DE SEGURIDAD

FOX 3 · User Manual · ENG

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

LEA estas instrucciones.

CONSERVE estas instrucciones.

PRESTE ATENCION a todas las advertencias.

SIGA todas las instrucciones.

NO utilice este aparato cerca del agua.

NO obstruya ninguna de las aberturas de ventilación. Instálese según lo indicado en las instrucciones del fabricante.

No instale el aparato cerca de fuentes de calor tales como radiadores, registros de calefacción, estufas u otros aparatos (incluyendo

amplificadores) que produzcan calor.

NO anule la función de seguridad del enchufe polarizado o con clavija de puesta a tierra. Un enchufe polarizado tiene dos patas, una más

ancha que la otra. Un enchufe con puesta a tierra tiene dos patas y una tercera clavija con puesta a tierra. La pata más ancha o la tercera clavija

se proporciona para su seguridad. Si el toma corriente no es del tipo apropiado para el enchufe, consulte a un electricista para que sustituya el

toma corriente de estilo anticuado.

PROTEJA el cable eléctrico para evitar que personas lo pisen o estrujen, particularmente en sus enchufes, en los toma corrientes y en el punto

en el cual sale del aparato.

UTILICE únicamente los accesorios especificados por el fabricante.

UTILICESE únicamente con un carro, pedestal, escuadra o mesa del tipo especificado por el fabricante o vendido con el aparato. Si se usa un

carro, el mismo debe moverse con sumo cuidado para evitar que se vuelque con el aparato.

DESENCHUFE el aparato durante las tormentas eléctricas, o si no va a ser utilizado por un lapso prolongado.

TODA reparación debe ser llevada a cabo por técnicos calificados. El aparato requiere reparación si ha sufrido cualquier tipo de daño,

incluyendo los daños al cordón o enchufe eléctrico, si se derrama líquido sobre el aparato o si caen objetos en su interior, si ha sido expuesto a

la lluvia o la humedad, si no funciona de modo normal, o si se ha caído.

NO exponga este aparato a chorros o salpicaduras de líquidos. NO coloque objetos llenos con líquido, tales como floreros, sobre el aparato .

15

SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA | INSTRUCCIONES IMPORTANTES DE SEGURIDAD

FOX 3 · User Manual · ENG

Este símbolo indica que la unidad contiene niveles de voltaje peligrosos que representan

un riesgo de choques eléctricos.

Este símbolo indica que la literatura que acompaña a esta unidad contiene instrucciones

importantes de funcionamiento y mantenimiento.

Antes de cambiar la alimentacion de voltaje o de cambiar el fusible, desconecte el

cable de alimentacion. Para reducir el riesgo de descargas electricas, esta unidad

debe ser conectada a tierra.

Remplaze el fusible con lo mismo, que corresponde a lo indicado en el panel del

equipo.

Antes de encender, controlar que la linea de alimentacion de voltaje corresponda a

la indicada.

El interruptor de alimentación es unipolar. En el caso de peligro, desconecte el cable

de alimentación. Porque la clavija de conexion a red sirve por la desconection de la

unidad, la clavija debe ser ubicada en proximidad de la unidad.

16

UNPACKING AND INSPECTION |INSTRUCCIONES IMPORTANTES DE SEGURIDAD

FOX 3 · User Manual · ENG

UNPACKING AND INSPECTION

Your equipment was packed carefully at the factory in a container designed to protect the unit during shipment. Nevertheless, we recommend

making a careful inspection of the shipping carton and the contents for any signs of physical damage.

Damage & Claims

If the damage is evident, do not discard the container or packing material. Contact your carrier immediately to file a claim for damages.

Customarily, the carrier requires you, the consignee, to make all damage claims. It will be helpful to retain the shipping documents and the

waybill number.

Save all packing materials! If You should ever have to ship the unit (e.g. for servicing), it is best to ship it in the original carton with its packing

materials because both the carton and packing material have been carefully designed to protect the unit.

Under normal conditions, no user maintenance or calibration is required. Internal links and preset controls may be set to configure the unit

during installation. Any service work required should be carried out by qualified service personnel only.

We can offer further product support through our worldwide network of approved dealers and service agents.

To help us provide the most efficient service please would you keep a record of the unit serial number and date and place of purchase to be

quoted in any communication regarding this product.

The actual equipment Serial Number is indicated on the silver label stuck on the rear panel of the equipment closure.

Tools And Equipment Needed

Only standard technicians’ tools are required to install this equipment.

17

FIRST INSTALLATION RECOMMENDATIONS | POWER SUPPLY CABLE

FOX 3 · User Manual · ENG

FIRST INSTALLATION RECOMMENDATIONS

POWER SUPPLY CABLE

A power supply cable of approx. 2 mt lengths is supplied with the device, which has a molded IEC plug attached – this is a legal requirement.

The type of plug for the power supply depends on the country in which it is delivered.

If for any reason, you need to use this appliance with a different plug, you should use the following wiring guidelines in replacing the existing plug with the new one:

Earth

Green, or green and yellow

Neutral (N)

Blue

Live (L)

Brown

Supply cables should be laid in such a manner that one does not step or walk on them. They should not be squashed by any objects.

THIS EQUIPMENT MUST BE EARTHED.

The chassis is always connected to the main earth to ensure your safety: check your main wiring and earthing before switching on.

PROTECTION AGAINST LIGHTNING

Should the device be put out of action due to being struck by lightning or excess voltage, disconnect it from

the power supply without delay. Do not reconnect until the device has been checked. If in doubt contact the

technical support service.

Make sure there is suitable lightning protection to protect the device.

Alternatively, you should disconnect all connectors from the device during a storm or when the device is

going to be unsupervised or not used for a longer period.

These measures will protect against damage by lightning or excess voltage.

18

DEVICE INSTALLATION |VENTILATION

FOX 3 · User Manual · ENG

VENTILATION

The equipment will operate as a free-standing unit without requiring any special cooling arrangement.

However, slots and openings in the product are provided for ventilation. They ensure the reliable operation of the product, keeping

it from overheating. These openings must not be blocked nor covered during operation.

YOU MUST LEAVE AT A MINIMUM ONE RACK UNIT OF EMPTY SPACE ABOVE THE EQUIPMENT TO ENHANCE VENTILATION AND TO GET

A LONGER EQUIPMENT LIFE.

DEVICE INSTALLATION

Best setup location

The device should be installed in a 19” rack. Avoid direct sunlight, close proximity to radiators and air conditioning, dust, water, and chemicals.

Choose a rack location that permits a clear view of the indicators on the device and ensures a sufficient heat dissipation of the device.

Power supply

The device is designed for operation with 100 to 240 V AC, 50 Hz to 60 Hz. Check the corresponding device labeling for compatibility with the

domestic line voltage and frequency before connecting the IEC power connector to the main supply!

WARNING

Disconnect the main power plug before you open the housing. Repair of the

equipment must only be carried out by authorized and qualified personnel.

19

DEVICE INSTALLATION | VENTILATION

FOX 3 · User Manual · ENG

Power Supply

Please make sure that the device and the contained fuse(s) (please see p. 20)

are compatible with the domestic line voltage and frequency. If the device is

compatible, connect the power supply cord fully to the IEC power

connector at the rear side of the device and a mains power outlet. The

LCD Screen will then turn on.

Network

configuration

For delivery, the device is configured with default settings for the first

connection via the IP interface.

Connect to network

Connect a network patch cable to the “10/100-Base-T” connector on the

rear side of the device and your existing IP network.

Web interface

The device can be fully operated with an internet browser via the integrated

web interface. Use a computer that is connected to the same IP network

that the device is connected to. Start an internet browser, Firefox/Mozilla

>V2.0 Google Chrome both with Java Script activated, and enter the

configured IP address in the address bar of the browser. If the IP address

has not been changed in step 2, please enter the default address in the

address bar of the browser: 192.168.120.120.

Ready!

These first steps are only intended for a quick first start and do not

cover all device functions. Please read carefully the entire manual to be able

to use all functions of the device.

Important note on

the Username and

password

The equipment comes out from Axel Technology with a standard username:

admin and password: admin

Each time a NEW user, with administration rights, is created, the user admin

disappears and is replaced by the new one just created. If all users are

deleted, the standard admin–admin comes out again

20

DEVICE GENERAL DESCRIPTION |FRONT PANEL

FOX 3 · User Manual · ENG

DEVICE GENERAL DESCRIPTION

FRONT PANEL

FOX 3

•

Mechanical Steel, 1U - 19 " rack standard.

•

USB Port - Type A.

•

TFT Color Graphic Display 480x128 (not included in X6).

•

Jog Shuttle (not included in X6).

•

40 Led Alarms.

•

Headphone Jack 6.3mm Female Connector.

La pagina sta caricando ...

AxelTech Fox 3 Manuale utente

AxelTech Fox 3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti