AEG HVB75450IB Manuale utente

USER

MANUAL

EN User Manual 2

Hob

IT Istruzioni per l’uso 26

Piano cottura

HVB75450IB

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 5

3. INSTALLATION.....................................................................................................7

4. PRODUCT DESCRIPTION.................................................................................12

5. DAILY USE......................................................................................................... 14

6. HINTS AND TIPS................................................................................................17

7. CARE AND CLEANING...................................................................................... 19

8. TROUBLESHOOTING........................................................................................21

9. TECHNICAL DATA............................................................................................. 24

10. ENERGY EFFICIENCY.....................................................................................24

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the

result of incorrect installation or usage. Always keep the

www.aeg.com2

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away unless continuously supervised.

• Children of less than 3 years of age should be kept

away unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

ENGLISH 3

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use a steam cleaner to clean the appliance.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• In case of hotplate glass breakage:

– shut immediately off all burners and any electrical

heating element and isolate the appliance from the

power supply,

– do not touch the appliance surface,

– do not use the appliance.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• Where the appliance is directly connected to the

power supply, an all-pole isolating switch with a

contact gap is required. Complete disconnection in

compliance with the conditions specified in

overvoltage category III must be guaranteed. The

earth cable is excluded from this.

• When you route the mains cable, make sure that the

cable doesn't come into direct contact (for example

using insulating sleeving) with parts that can reach

temperatures of more than 50°C above room

temperature.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

www.aeg.com4

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

This appliance is suitable for the

following markets: IT

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware falling from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustible separation panel under

the appliance to prevent access to the

bottom.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

ENGLISH 5

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

• This appliance is not connected to a

device, which evacuates the products

of combustion. Make sure to connect

the appliance according to current

installation regulations. Pay attention

to requirements regarding adequate

ventilation.

2.4 Use

WARNING!

Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• This appliance is for household use

only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• Use only stable cookware with the

correct shape and diameter larger

than the dimensions of the burners.

• Make sure cookware is centrally

positioned on the burners.

www.aeg.com6

• Do not use large cookware that

overlap the edges of the appliance.

This can cause damage to the

worktop surface.

• Use only the accessories supplied

with the appliance.

• Do not install a flame diffuser on the

burner.

• The use of a gas cooking appliance

results in the production of heat and

moisture. Provide good ventilation in

the room where the appliance is

installed.

• Prolonged intensive use of the

appliance may call for additional

ventilation, for example opening of a

window, or more effective ventilation,

for example increasing the level of

mechanical ventilation where present.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

• Do not let acid liquids, for example

vinegar, lemon juice or limescale

remover, touch the hob. This can

cause matt patches.

• Discoloration of the enamel or

stainless steel has no effect on the

performance of the appliance.

2.5 Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products,

abrasive cleaning pads, solvents or

metal objects.

• Do not clean the burners in the

dishwasher.

2.6 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

• Flat the external gas pipes.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Model .......................................

PNC .........................................

Serial number ...........................

ENGLISH 7

3.2 Gas Connection

WARNING!

The following instructions

about installation,

maintenance and ventilation

must be carried out by

qualified personnel in

compliance with the

regulation in force (UNI-CIG

7129 - 7131). Make sure that

the kitchen is well ventilated:

keep natural ventilation

holes open (at least 100

cm²) or install a mechanical

extractor hood.

Choose fixed connections or use a

flexible pipe in stainless steel in

compliance with the regulation in force. If

you use flexible metallic pipes, be careful

they do not come in touch with mobile

parts or they are not squeezed. Also be

careful when the hob is put together with

an oven.

Make sure that the gas

supply pressure of the

appliance obeys the

recommended values.

If the supplied pressure has not the

specified value, it is necessary to

assemble a proper pressure regulator in

compliance with the standard UNI EN 88.

For Liquid Gas (LPG) the use of pressure

regulator is allowed only if they are in

compliance with UNI EN 12864. The

adjustable connection is fixed to the

comprehensive ramp by means of a

threaded nut G 1/2". Screw the parts

without force, adjust the connection in

the necessary direction and tighten

everything.

A

A. End of shaft with nut

Rigid connection:

Carry out connection by using metal rigid

pipes (copper with mechanical end)

(UNI-CIG 7129).

Flexible connection:

Use a flexible pipe in stainless steel

(UNI-CIG 9891) with a maximum length 2

m.

WARNING!

When installation is

complete, make sure that

the seal of each pipe fitting

is correct. Use a soapy

solution, not a flame!

3.3 Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the

type of gas you use (see table in

"Technical Data" chapter).

4. Assemble the parts, follow the same

procedure backwards.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied

with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure

adjuster on the gas supply pipe.

3.4 Gas selection

1. Touch for 3 seconds.

2. Within 7 seconds, touch for 3

seconds.

3. Touch 3 times.

The display shows G1 mode.

4. Touch .

To enter the mode.

5. Timer display shows selected gas

type.

6. Touch to set the gas type

according to table below.

7. Touch

.

To confirm the gas type.

www.aeg.com8

Touch to exit the mode or wait for

Automatic Switch Off function activates.

Gas selection

0 1 2

G20 20 mbar Liquid gas 29 mbar Safety risk, do not use 2 gas se‐

lection. Use only 0 or 1 gas se‐

lections depend on gas supply.

3.5 Adjustment of minimum

level

WARNING!

Information for authorised

installer only.

Switch off the hob before the

adjustment.

To adjust the minimum level of the

burners:

1. Touch

for 3 seconds.

2. Within 7 seconds, touch

for 3

seconds.

3. Touch 4 times.

The display shows G2 mode.

4. Touch .

To enter the mode.

5. Wait 5 seconds, after selecting the

mode.

The burner shows minimum level and the

control bar shows .

6. Touch or .

To increase or decrease the value and

adjust the minimum level.

7. Wait 5 seconds.

To send the selected value to power

board.

8. Check it the minimum level is correct

and touch

.

To confirm the minimum level.

If the minimum level is

incorrect, repeat the steps 6

and 7.

9. Touch to select the next burner

and repeat the steps 5-8.

Touch to exit the mode.

WARNING!

Make sure the flame does

not go out when you move

quickly from the maximum to

the minimum heat setting

position.

WARNING!

Do not set the G3 and G4

modes. It is for authorised

installer only.

3.6 Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate

agree with the voltage and the power

of the local power supply.

• This appliance is supplied with a

mains cable. It has to be supplied with

a correct plug which can hold the load

that the rating plate rates. Make sure

that you install the plug in a correct

socket.

• Always use a correctly installed

shockproof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• There is a risk of fire when the

appliance is in connection with an

extension cable, an adapter or a

multiple connection. Make sure that

the ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

To prevent contact between the cable

and the appliance below the hob use the

clamps which are on the side of the

cabinet.

ENGLISH 9

A

A. Rigid copper pipe or flexible pipe of

stainless steel

3.7 Connection cable

To replace the connection cable use only

the special cable or its equivalent. The

cable type is: H05SS-F T180.

Make sure that the cable section is

applicable to the voltage and the working

temperature. The yellow / green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

3.8 Assembly

min.

150mm

min.

650mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

www.aeg.com10

min.

38 mm

min.

2 mm

min.

12 mm

min.

2 mm

CAUTION!

Install the appliance only on

a worktop with flat surface.

3.9 Installing hob under the

hood

If you install the hob under a

hood, please see the

installation instructions of the

hood for the minimum

distance between the

appliances.

ENGLISH 11

3.10 Possibilities for insertion

The panel installed below the hob must

be easy to remove and let an easy

access in case a technical assistance

intervention is necessary.

Kitchen unit with door

min 6 mm

min 5 mm

(max 150 mm)

min 40 mm

60 mm

B

A

A. Removable panel

B. Space for connections

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

1

3

2

4

1

Semi-rapid burner

2

Multi Crown burner

3

Auxiliary burner

4

Control panel

4.2 Control panel layout

5 621 43

11 8

7

9

10

Use the sensor fields to operate the appliance. The displays, indicators and sounds

tell which functions operate.

www.aeg.com12

Sen‐

sor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / Child Safety Device To lock / unlock the control panel.

3

Pause To activate and deactivate the function.

4

- Heat setting display To show the heat setting.

5

- Timer display To show the time in minutes or possible er‐

ror codes (Refer to "Troubleshooting").

6

Led indicator To show activated function.

7

Hob²Hood To activate and deactivate the manual mode

of the function.

8

- To activate and deactivate the Timer.

9

/

- To increase or decrease the time.

10

- Area for Hob²Hood infra‐

red signal

To hood communication.

11

- Control bar To set the heat setting for the burner.

4.3 Heat setting displays

Display Description

Burner is deactivated.

-

Burner operates.

There is a warning (Refer to "Troubleshooting").

A cooking zone is still hot (residual heat).

Lock / Child Safety Device operates.

Pause operates.

Automatic Switch Off function operates.

ENGLISH 13

4.4 Hot Surface Indicator

WARNING!

If the cooking zone becomes

hot during cooking, the

setting indicator shows a Hot

Surface warning when

the zone is turned off. The

Hot Surface Indicator shows

until the cooking zone cools.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Burner overview

$

%

'

&

$

%

'

&

A. Burner cap

B. Burner crown

C. Ignition candle

D. Flame safety device

5.2 Ignition of the burner

Always light the burner

before you put on the

cookware.

WARNING!

Be very careful when you

use open fire in the kitchen

environment. The

manufacturer declines any

responsibility in case of the

flame misuse.

1. Touch for 1 second to activate the

hob.

After 20 seconds of non-use, the hob

deactivates.

2. After light animation, when you see

on display, touch the control bar

at the correct heat setting or move

your finger along the control bar until

you reach the correct heat setting.

To set or change the heat setting.

If after some tries the burner

does not light, check if the

crown and its cap are in

correct positions and clean

the metal part of the flame

safety device (Refer to "Care

and cleaning").

www.aeg.com14

If during the normal use of

the burner it starts to spark

and flame adjust

automatically, check if the

metal part of the ignition

candle and the flame safety

device are clean (Refer to

"Care and cleaning").

If the burner accidentally

goes out, the hob re-ignite

the burner 3 times. If the

flame still does not light,

appears.

If the warning appears,

turn off and turn on again the

hob.

When the display function

reappears, after light

animation, touch , release

it and then touch

within 3

seconds. When you see

the warning is reset (Refer to

"Troubleshooting").

5.3 Turning the burner off

To put the flame out, touch the control

bar to the off position .

WARNING!

Always turn the flame down

or switch it off before you

remove the pans from the

burner.

5.4 Automatic Switch Off

The function deactivates the hob

automatically if:

• all burners are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a burner or

change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Level Time (hours)

1 6

2 3

3 3

4 1,5

5 1,5

5.5 Lock or unlock the

cooktop

You can lock the control panel while

burners operate. It prevents an

accidental change of the heat setting.

To lock the control panel:

1. Set the heat setting.

2. Touch the .

3.

appears on the display of the

burner.

To unlock the control panel, touch

again.

You can turn the burners off

while the control panel is

locked. Use to deactivate

the hob.

To set the lock for child safety:

1. Touch to turn the cooktop on.

2. Touch for 3 seconds, to activate

the lock. comes on in all control

bars.

3. Touch

to turn the cooktop off.

You can unlock the cooktop

while the child safety

operates.

To temporarily unlock:

1. Touch to turn the cooktop on.

2. Touch for 3 seconds.

ENGLISH 15

3. appears on the display of the

burner.

4. Set the heat setting.

5. After end of the cooking process and

after turning off the cooktop, the Lock

function is active.

To completely unlock:

1. Touch to turn the cooktop on.

2. Touch for 3 seconds. The lock

deactivates.

3. Touch

to turn the cooktop off.

5.6 Pause

This function sets all burners that

operate to the lowest heat setting.

When the function operates, you can not

change the heat setting.

When the function does not stop the

timer functions.

Touch

to activate the function.

comes on.

To deactivate the function, touch . The

previous heat setting comes on.

5.7 Minute Minder

You can use this function as a Minute

Minder when the hob is activated.

1. Touch .

2. Touch

or of the timer to set the

time in minutes (00-99). The timer

indicator starts to flash quickly

during the time setting.

3. When the timer indicator starts to

flash slowly, the timer is activated.

When the time comes to an end, the

sound operates and 00 flashes.

4. Touch .

To stop the sound.

The function has no effect

on the operation of the

burners.

The maximum duration of

the timer functions is 00-99

minutes. Check the minute

minder instructions (missing

timer adjustment).

5.8 OffSound Control

(Deactivating and activating

the sounds)

Deactivate the hob. Touch for 3

seconds. The display comes on and

goes out. Touch for 3 seconds. or

comes on. Touch of the timer to

choose one of the following:

• - the sounds are off

•

- the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

5.9 Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. Speed

of the fan is defined automatically on the

basis of the mode setting and

temperature of the hottest cookware on

the hob. You can also operate the fan

from the hob manually.

The hood operates only

when the hob is activated.

For most of the hoods, the

remote system is originally

deactivated. Activate it

before you use the function.

For more information refer to

the hood user manual.

The hob automatically sets

the speed of the fan

according to the cooking

process.

www.aeg.com16

Automatic modes

Mode Mode de‐

scription

Auto‐

matic

light

Auto‐

matic

fan

speed

H0 Manual Off Off

H1 Auto light On Off

H2 Fixed speed On 1

H3 Auto speed

Low

On 0-1

H4 Auto speed

Mid

On 0-1

H5 Auto speed

High

On 0-2

H6 Auto speed

Intense

On 0-3

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds. the display

comes on and goes off.

3. Touch for 3 seconds.

4. Touch a few times until comes

on.

5. Touch of the Timer to select an

automatic mode.

Touch to set the speed

manually.

Touch longer to turn off

the fan and the light.

WARNING!

After end of cooking, the

hood does not turn off

automatically. Turn it off

manually.

6. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

CAUTION!

Do not use cast iron pans,

clay or earthenware pots,

grill or toaster plates.

WARNING!

Do not put the same pan on

two burners.

WARNING!

Do not put unstable or

damaged pots on the burner

to prevent spills and injuries.

CAUTION!

Make sure that pot handles

are not above the front edge

of the cooktop.

CAUTION!

Make sure that the pots are

placed centrally on the

burner in order to get the

maximum stability and a

lower gas consumption.

CAUTION!

Liquids spilt during cooking

can cause the glass to

break.

6.2 Diameters of cookware

Use cookware with

diameters applicable to the

size of burners.

Burner Diameter of

cookware

(mm)

Multi Crown 220 - 260

Semi-rapid (rear left) 120 - 240

ENGLISH 17

Burner Diameter of

cookware

(mm)

Semi-rapid (rear right) 120 - 240

Semi-rapid (front left) 120 - 220

Auxiliary 80 - 180

6.3 Hints and Tips for

Hob²Hood

When you operate the hob with the

function:

• Protect the hood panel from direct

sunlight.

• Do not spot halogen light on the hood

panel.

• Do not cover the hob control panel.

• Do not interrupt the signal between

the hob and the hood (for example

with a hand or a cookware handle).

See the picture.

The hood in the picture is only

exemplary.

Keep the window for

Hob²Hood infrared signal

communicator clean.

Other remotely controlled

appliances may block the

signal. Do not use any

remotely controlled

appliances at the time when

you use the function on the

hob.

Cooker hoods with the Hob²Hood

function

To find the full range of cooker hoods

which work with this function refer to our

consumer website. The AEG cooker

hoods that work with this function must

have the symbol .

6.4 Examples of cooking

applications

The data in the table shows examples of

the heat setting and cooking times for

gentle and heavy frying, and delicate

cooking.

• Adjust the settings depend on the

type of food, the type of the gas used,

the material and the size of the pans.

Refer to diameters of cookware in

Hints and Tips chapter.

• For delicate cooking use the auxiliary

burner or semi-rapid burner with flame

spreader.

• For an even heat distribution use

coated pan and cook on auxiliary or

semi-rapid burners.

• Each example in the table below

shows two or three steps.

• If you use a pan, heat up the oil first,

while frying keep the pan at a

constant temperature in accordance

with the values suggested in the table.

Cooking method symbols used in the

table:

Heat up the oil

Gentle frying

Heat to boiling

Simmering

Blending, melting in‐

gredients

www.aeg.com18

Food

P

or

ti

o

n

s

Burn‐

er

Step 1 Step 2 Step 3

Sym‐

bol

Le

ve

l

Time

(min)

Sym‐

bol

Le

ve

l

Time

(min)

Sym‐

bol

Le

ve

l

Time

(min)

Crepe

s

4 SR 5 1-4 2 4-8

Bur‐

gers

2 AUX 5 1-5 3 4-8

Bur‐

gers

3 SR 5 1-5 3 4-8

Bur‐

gers

4 MC 5 1-5 3 4-7

Fries 4 MC 5 20-30

Be‐

cha‐

mel

1)

4 AUX

2)

1 5-10

2)

5 5-10

2)

1 4-8

Rice

por‐

ridg

e

1)

4 AUX

2)

5 10-20

2)

1 30-40

1)

Stirring continuously

2)

Without lid

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.

• It is recommended to activate the

lock / child safety device function

(Refer to "Lock or unlock the cooktop"

in "Daily use" chapter).

• Always use cookware with a clean

base.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

The presence of water or

other liquids on the control

panel can accidentally

activate or deactivate the

hob functions.

WARNING!

Do not use knives, scrapers

or similar instruments to

clean the surface of the

glass or the rims of the

burners and the frame (if

applicable).

ENGLISH 19

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

7.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when

you replace the pan

supports to prevent the

hob top from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

7.3 Removing pan supports

To keep the pan supports in the correct

position, they are put on metal pins

installed in the rear side of the hob. For

easier cleaning, pan supports can be

removed from the hob. Lift up the pan

supports keeping them in horizontal

position as shown in the graphic.

Do not lift the pan supports

at an angle, as this will put

strain on the metal pins. This

can cause damage to the

pins and cause them to

break.

The shape of pan supports and the

amount of burners can be different in

other models of the appliance.

7.4 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and a non-abrasive

www.aeg.com20

La pagina sta caricando ...

AEG HVB75450IB Manuale utente

AEG HVB75450IB Manuale utente

in altre lingue

Documenti correlati

Altri documenti