Pioneer DDJ-SR Guida Rapida

Marca: Pioneer

Modello: DDJ-SR

Categoria: Controller DJ

Tipo: Guida Rapida

Français Deutsch ItalianoEnglish Nederlands

DDJ-SR

DJ Controller

Contrôleur pour DJ

DJ Controller

http://pioneerdj.com/support/

http://serato.com/

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of

information and services to allow you to use your product in greater comfort.

The contents of the warranty for the United States and Canada are provided on the last pages of the

instructions in English and French.

For the latest version of the Serato DJ software, access Serato.com and download the software from there.

Le site de support DJ de Pioneer indiqué ci-dessus propose une FAQ, des informations sur le logiciel et divers

types d’informations et de services qui permettent une utilisation plus confortable de ce produit.

Le contenu de la garantie pour les États-Unis et le Canada se trouvent aux dernières pages des

modes d’emploi anglais et français.

Pour la toute dernière version du logiciel Serato DJ, accédez à Serato.com et téléchargez le logiciel de ce site.

Die oben gezeigte Pioneer DJ-Support-Website enthält häufig gestellte Fragen, Informationen über Software

und andere wichtige Informationen und Dienste, die Ihnen helfen, Ihr Produkt optimal zu verwenden.

Für die neueste Version der Serato DJ-Software gehen Sie zu Serato.com und laden die Software von dort

herunter.

Il sito di supporto DJ Pioneer indicato qui sopra offre una sezione FAQ, informazioni sul software ed

informazioni e servizi di vario tipo, per permettere un uso più confortevole dei nostri prodotti.

Per ottenere la più recente versione di Serato DJ, raggiungere Serato.com e scaricare il software di lì.

De bovengenoemde Pioneer DJ ondersteuningswebsite biedt een overzicht van de vaak gestelde vragen,

informatie over software en allerlei andere soorten informatie en diensten die u in staat stellen dit product met

meer gemak te gebruiken.

Ga voor de nieuwste versie van de Serato DJ-software naar Serato.com en download de software van deze site.

Read Before Use (Important)/Quick Start Guide

A lire avant l’utilisation (Important)/Guide de démarrage rapide

Vor Gebrauch lesen (wichtig)/Kurzanleitung

Da leggere prima dell’uso (Importante)/Guida di avvio veloce

Lees dit voor gebruik (Belangrijk)/Snelstartgids

WARNING

This equipment is not waterproof. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture.

D3-4-2-1-3_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light).

D3-4-2-1-7c*_A2_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which requires

repair will be charged for even during the warranty

period.

K041_A1_En

When using this product, confirm the safety

information shown on the bottom of the unit.

D3-4-2-2-4_B1_En

For U.S.A. and Canada

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without

annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving.

Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be

loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing

adapts.

ESTABLISH A SAFE LEVEL:

> Set your volume control at a low setting.

> Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

> Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

> Do not turn up the volume so high that you can’t hear what’s around you.

> Use caution or temporarily discontinue use in potentially hazardous situations.

> Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and

is illegal in many areas.

S001a_A1_En

For Europe

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058b_A1_En

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product may expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P5_B1_En

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF

THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.

RECORD THESE NUMBERS ON PAGE 16 FOR

FUTURE REFERENCE.

D36-AP9-3*_A1_En

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

10)

Only use attachments/accessories specified by

the manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

D3-7-13-69_En

11)

12)

13)

14)

For U.S.A.

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: DJ controller

Model Number: DDJ-SR

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

English

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: DJ controller

Model Number: DDJ-SR

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

Information to User

Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate

the equipment.

D8-10-2_A1_En

For other areas

English

Before start

How to read this manual

 Thank you for buying this Pioneer product.

Be sure to read both this leaflet and the operating instructions! Both

documents include important information that you must understand

before using this product.

After you have finished reading the instructions, put them away in a

safe place for future reference.

— For instructions on acquiring the operating instructions, see

Acquiring the manual (p. 14).

 In this manual, names of screens and menus displayed on the prod-

uct and on the computer screen, as well as names of buttons and

terminals, etc., are indicated within brackets. (e.g.: [CUE] button,

[Files] panel, [MIC] terminal)

 Please note that the screens and specifications of the software

described in this manual as well as the external appearance and

specifications of the hardware are currently under development and

may differ from the final specifications.

 Please note that depending on the operating system version, web

browser settings, etc., operation may differ from the procedures

described in this manual.

What’s in the box

 CD-ROM (Installation Disc)

 USB cable

 Warranty (for some regions)

 Read Before Use (Important)/Quick Start Guide (this document)

1 The included warranty is for the European region.

 For the North American region, the corresponding information is

provided on the last page of both the English and French versions

of the “Read Before Use (Important)/Quick Start Guide”.

 For the Japanese region, the corresponding information is

provided on the last page of the Japanese version of the “Read

Before Use (Important)/Quick Start Guide”.

Installing the software

Before installing the software

For the latest version of the Serato DJ software, access Serato.com

and download the software from there.

 For details, refer to Installation Procedure (Windows) or Installation

procedure (Mac OS X).

 The user is responsible for preparing the computer, network

devices and other elements of the Internet usage environment

required for a connection to the Internet.

About the driver software (Windows)

This driver software is an exclusive ASIO driver for outputting audio

signals from the computer.

 There is no need to install the driver software when using Mac OS X.

Checking the latest information on the driver software

For detailed information on this unit’s designated driver software, see

the Pioneer DJ support site below.

http://pioneerdj.com/support/

About the Serato DJ software

Serato DJ is a DJ software application by Serato. DJ performances are

possible by connecting the computer on which this software is installed

to this unit.

Minimum operating environment

Supported operating systems

Mac OS X: 10.8, 10.7 and 10.6

Windows: Windows 7

Others

Optical drive Optical disc drive on which the CD-ROM can be read

USB port

A USB 2.0 port is required to connect the computer

with this unit.

Display resolution Resolution of 1 280 x 720 or greater

Internet connection

An Internet connection is required for registering

the “Serato.com” user account and downloading the

software.

 For the latest information on the required operating environment and compat-

ibility as well as to acquire the latest operating system, refer to “Software Info”

under “DDJ-SR” on the Pioneer DJ support site below.

http://pioneerdj.com/support/

 Operating System support assumes you are using the latest point release for

that version.

 Operation is not guaranteed on all computers, even if all the required operating

environment conditions indicated here are fulfilled.

 Depending on the computer’s power-saving settings, etc., the CPU and hard

disk may not provide sufficient processing capabilities. For notebook comput-

ers in particular, make sure the computer is in the proper conditions to provide

constant high performance (for example by keeping the AC power connected)

when using Serato DJ.

 Use of the Internet requires a separate contract with a provider offering Internet

services and payment of provider fees.

About the installation procedure

The installation procedure depends on the operating system (OS) on the

computer you are using.

For Windows

After installing the driver software, install the Serato DJ software.

For Mac OS X

Only install the Serato DJ software.

Installation Procedure (Windows)

Do not connect this unit and the computer until installation is

completed.

 Log on as the user which was set as the computer’s administrator

before installing.

 If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s optical drive.

The CD-ROM menu is displayed.

 If the CD-ROM menu does not appear when the CD-ROM is inserted,

open the optical drive from [Computer (or My Computer)] in the

[Start] menu, then double-click the [CD_menu.exe] icon.

2 When the CD-ROM menu appears, select [Install

Driver Software (Pioneer_DDJ_SR_Driver_x.xxx.exe)],

then click [Start].

 To close the CD-ROM menu, click [Exit].

3 Proceed with installation according to the instructions

on the screen.

If [Windows Security] appears on the screen while the installation is

in progress, click [Install this driver software anyway] and continue

with the installation.

When the installation program is completed, a completion message

appears.

After installing the driver software, install the Serato DJ software.

4 Select [Download Serato DJ Software] from the

CD-ROM’s menu, then click [Start].

5 “An internet environment is required to access the

site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is

displayed.

6 Click [Software Info] under [DDJ-SR] on the Pioneer DJ

support site.

[Serato DJ Support Information] is displayed.

7 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed.

8 Log in to your “Serato.com” user account.

 If you have already registered a user account on “Serato.com”,

proceed to step 10.

 If you have not completed registering your user account, do so

following the procedure below.

— Following the instructions on the screen, input your e-mail

address and the password you want to set, then select the

region in which you live.

— If you check [E-mail me Serato newsletters], newsletters

providing the latest information on Serato products will be

sent from Serato.

— Once user account registration is completed, you will receive

an e-mail at the e-mail address you have input. Check the

contents of the e-mail sent from “Serato.com”.

 Be careful not to forget the e-mail address and password speci-

fied when you performed user registration. They will be required

for updating the software.

 The personal information input when registering a new user

account may be collected, processed and used based on the

9 Click the link in the e-mail message sent from “Serato.

com”.

This takes you to the Serato DJ download page. Proceed to step 11.

10 Log in.

Input the e-mail address and password you have registered to log in to

“Serato.com”.

11 Download the Serato DJ software from the download

page.

Unzip the downloaded file, then double-click the unzipped file to launch

the installer.

12 Read the terms of the license agreement carefully,

and if you agree, select [I agree to the license terms and

conditions], then click [Install].

 If you do not agree to the contents of the license agreement, click

[Close] to cancel installation.

Installation begins.

The message of successful installation appears once installation is

completed.

13 Click [Close] to quit the Serato DJ installer.

Installation procedure (Mac OS X)

Do not connect this unit and the computer until installation is

completed.

 If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s optical drive.

The CD-ROM menu is displayed.

 If the CD-ROM menu does not appear on the screen when the

CD-ROM is inserted, open the optical driver from Finder, then dou-

ble-click the [CD_menu.app] icon.

2 Select [Download Serato DJ Software] from the

CD-ROM’s menu, then click [Start].

3 “An internet environment is required to access the

site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is

displayed.

4 Click [Software Info] under [DDJ-SR] on the Pioneer DJ

support site.

[Serato DJ Support Information] is displayed.

5 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed.

6 Log in to your “Serato.com” user account.

 If you have already registered a user account on “Serato.com”,

proceed to step 8.

 If you have not completed registering your user account, do so

following the procedure below.

— Following the instructions on the screen, input your e-mail

address and the password you want to set, then select the

region in which you live.

— If you check [E-mail me Serato newsletters], newsletters

providing the latest information on Serato products will be

sent from Serato.

— Once user account registration is completed, you will receive

an e-mail at the e-mail address you have input. Check the

contents of the e-mail sent from “Serato.com”.

 Be careful not to forget the e-mail address and password speci-

fied when you performed user registration. They will be required

for updating the software.

 The personal information input when registering a new user

account may be collected, processed and used based on the

English

7 Click the link in the e-mail message sent from “Serato.

com”.

This takes you to the Serato DJ download page. Proceed to step 9.

8 Log in.

Input the e-mail address and password you have registered to log in to

“Serato.com”.

9 Download the Serato DJ software from the download

page.

Unzip the downloaded file, then double-click the unzipped file to launch

the installer.

10 Read the terms of the license agreement carefully,

and if you agree, click [Agree].

 If you do not agree to the contents of the usage agreement, click

[Disagree] to cancel installation.

11 If the following screen appears, drag and drop the

[Serato DJ] icon on the [Applications] folder icon.

Operation

Be sure the power is off when connecting equipment and changing

connections.

Be sure to use the USB cable included with this product.

Refer to the operating instructions for the component to be connected.

With this unit, the power is supplied by USB bus power. The unit can be

used simply by connecting it to a computer using the USB cable.

 Connect the computer to which this unit is to be connected to an AC

power supply.

 A USB hub cannot be used.

 In cases like the ones below, the power may be insufficient and this

unit may not operate on USB bus power.

— When the computer’s USB power supply capacity is insufficient.

— When other USB devices are connected to the computer.

— When headphones with an impedance of less than 32 : are

connected.

— When headphones are simultaneously connected to the stereo

phone jack and the stereo mini-phone jack.

— When a monaural jack is connected to the [HEADPHONES]

terminal.

Connections

1 Connect headphones to one of the [HEADPHONES]

terminals.

2 Connect powered speakers, a power amplifier,

components, etc., to the [MASTER OUT1] or [BOOTH

OUT/MASTER OUT2] terminals.

Powered speaker, etc

 For details on connecting the input/output terminals, see the

Operating Instructions.

3 Connect this unit to your computer via a USB cable.

4 Turn on the computer’s power.

5 Switch the [ON/OFF] switch on this unit’s rear panel

to the [ON] side to turn this unit’s power on.

Turn on the power of this unit.

 For Windows users

The message [Installing device driver software] may appear

when this unit is first connected to the computer or when it is

connected to a different USB port on the computer. Wait a while

until the message [Your devices are ready for use] appears.

6 Turn on the power of the devices connected to the

output terminals (powered speakers, power amplifier,

components, etc.).

 When a microphone, DJ player or other external device is con-

nected to input terminals, the power of that device also turns on.

English

Starting the system

䢢 Launching Serato DJ

For Windows

From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ].

For Mac OS X

In Finder, open the [Applications] folder, then click the [Serato DJ] icon.

Computer screen directly after the Serato DJ software is launched

1 The [ACTIVATE/BUY] icon may appear on the right side of the screen that is displayed when Serato DJ is launched the first time, but there is no

need to activate or purchase a license for those using DDJ-SR.

2 Check [DO NOT SHOW AGAIN] at the bottom right of the screen, then click [License] and continue to use Serato DJ as such.

To operate the beat grid

With Serato DJ, [SYNC PREFERENCE] is set to [Simple sync] by default, but this must be switched to [Smart sync] in order to perform beat grid

operations.

SETUP–DJ Preference-SYNC PREFERENCE

For instructions on displaying the settings screen and details on the beat grid, see the Serato DJ manual.

Computer screen when a track is loaded in the Serato DJ software

Click [Library] at the upper left of the computer screen, then select [Vertical] or [Horizontal] from the pull-down menu to switch the Serato DJ screen.

A Deck section

The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.

B Waveform display

The loaded track’s waveform is displayed here.

C Browser section

Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.

This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see

the Serato DJ software manual.

䢢 Importing tracks

The following describes the typical procedure for importing tracks.

 There are various ways to import tracks with the Serato DJ software. For details, see the Serato DJ software manual.

 If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ Intro) and have already created track libraries, the track libraries you

have previously created can be used as such.

 If you are using Serato DJ Intro and have already created track libraries, you may have to reanalyze the tracks.

1 Click the [Files] key on the Serato DJ software screen to open the [Files] panel.

The contents of your computer or the peripheral connected to the computer are displayed in the [Files] panel.

2 Click the folder on the [Files] panel containing the tracks you want to add to the library to select it.

3 On the Serato DJ software screen, drag and drop the selected folder to the crates panel.

A crate is created and the tracks are added to the library.

a [Files] panel

b Crates panel

䢢 Loading tracks and playing them

The following describes the procedure for loading tracks into deck [1] as

an example.

1 Rotary selector

2 BACK (VIEW) button

3 LOAD button

1 Press this unit’s [BACK (VIEW)] button, move the

cursor to the crates panel on the computer’s screen, then

turn the rotary selector to select the crate, etc.

2 Press the rotary selector, move the cursor to the

library on the computer’s screen, then turn the rotary

selector and select the track.

a Library

b Crates panel

3 Press the [LOAD] button to load the selected track

onto the deck.

English

䢢 Playing tracks and outputting the sound

The following describes the procedure for outputting the channel 1

sound as an example.

 Set the volume of the devices (power amplifier, powered speakers,

etc.) connected to the [MASTER OUT1] and [BOOTH OUT/MASTER

OUT2] terminals to an appropriate level. Note that loud sound will be

output if the volume is set too high.

Mixer section

Front panel

Rear panel

4 TRIM control

5 EQ (HI, MID, LOW) controls

6 FILTER control

7 Headphones CUE/TAP button

8 Channel fader

9 MASTER LEVEL control

a HEADPHONES MIX control

b Level indicator switch

c Crossfader

d HEADPHONES LEVEL control

e CROSS FADER REVERSE switch

f CROSS FADER CURVE control

g BOOTH LEVEL control

h BOOTH/MASTER selector switch

Set the positions of the controls, etc., as shown

below.

Names of controls, etc. Position

MASTER LEVEL control Turned fully counterclockwise

TRIM control Turned fully counterclockwise

EQ (HI, MID, LOW) controls Center

FILTER control Center

Level indicator switch [CH1/2] position

Channel fader Moved forward

CROSS FADER REVERSE switch [OFF] position

BOOTH/MASTER selector switch [MASTER] position

BOOTH LEVEL control Turned fully counterclockwise

2 Press the ["] button to play the track.

3 Move the channel fader away from you.

4 Turn the [TRIM] control.

Adjust [TRIM] so that the orange indicator on the channel level indicator

lights at the peak level.

5 Turn the [MASTER LEVEL] control to adjust the audio

level of the speakers.

Adjust the sound level output from the [MASTER OUT1] and [BOOTH

OUT/MASTER OUT2] terminals to an appropriate level.

When the [BOOTH/MASTER] selector switch is set to the [BOOTH]

position, the [BOOTH LEVEL] control can be used to adjust only the

audio level output from the [BOOTH OUT/MASTER OUT2] terminal to

an appropriate volume.

䢢 Monitoring sound with headphones

Set the positions of the controls, etc., as shown below.

Names of controls, etc. Position

HEADPHONES MIX control Center

HEADPHONES LEVEL control Turned fully counterclockwise

1 Press the headphones [CUE/TAP] button for the

channel 1.

2 Turn the [HEADPHONES LEVEL] control.

Adjust the sound level output from the headphones to an appropriate

level.

Note

This unit and the Serato DJ software include a variety of functions

enabling individualistic DJ performances. For details on the respective

functions, see the operating instructions and the Serato DJ software

manual.

 This unit’s operating instructions can be downloaded from the

Pioneer DJ support site. For details, see Downloading this unit’s oper-

ating instructions (p. 14).

 The Serato DJ software manual can be downloaded from Serato.

com. For details, see Downloading the Serato DJ software manual (p.

14).

Quitting the system

1 Quit Serato DJ.

When the software is closed, a message for confirming that you want to

close it appears on the computer’s screen. Click [Yes] to close.

2 Switch the [ON/OFF] switch on this unit’s rear panel

to the [OFF] side to turn this unit’s power off.

3 Disconnect the USB cable from your computer.

Names of Parts

1 Browser section

2 Deck section

3 Mixer section

4 Effect section

Browser section

1 2 1

3 4

1 LOAD button

2 Rotary selector

3 BACK (VIEW) button

4 LOAD PREPARE (AREA) button

Deck section

This section is used to control the four decks. The buttons and controls for

operating decks 1 and 3 are located on the left side of the controller, those

for operating decks 2 and 4 are located on the right side of the controller.

1 VINYL button

2 Jog dial

3 DECK 1 button

The deck on the right side has a [DECK 2] button.

4 DECK 3 button

The deck on the right side has a [DECK 4] button.

5 SHIFT button

6 SYNC button

7 CUE button

8 PLAY/PAUSE " button

9 HOT CUE mode button

a ROLL mode button

b SLICER mode button

c SAMPLER mode button

d Performance pads

e PARAMETER button, PARAMETER button

f Beat indicator

g 1/2X (IN) button

h 2X (OUT) button

i AUTO LOOP button

j PAD PLUS ON button

k PAD PLUS TAP button

l KEY LOCK button

m SLIP button

n TEMPO slider

English

Mixer section

1 TRIM control

2 EQ (HI, MID, LOW) controls

3 FILTER control

4 Headphones CUE/TAP button

5 Channel fader

6 Level indicator switch

7 Level indicator

8 Crossfader

9 CROSS FADER REVERSE indicator

a MASTER LEVEL control

b HEADPHONES MIX control

c SAMPLER VOLUME control

Effect section

This section is used to control the two effect units (FX1 and FX2).

Controls and buttons to operate the FX1 unit are located on the left side

of the controller, those to operate the FX2 unit are located on the right

side of the controller.

1 2 3 4 5 6

7 8 9 a

1 FX ASSIGN 1 buttons

2 FX ASSIGN 2 buttons

3 Effect parameter 1 control

4 Effect parameter 2 control

5 Effect parameter 3 control

6 FX BEATS control

7 Effect parameter 1 button

8 Effect parameter 2 button

9 Effect parameter 3 button

a TAP (FX MODE) button

Front panel

13 42

1 HEADPHONES LEVEL control

2 CROSS FADER REVERSE switch

3 CROSS FADER CURVE control

4 MIC LEVEL control

Rear panel

3 4

1 AUX IN LEVEL control

2 BOOTH LEVEL control

3 BOOTH/MASTER selector switch

4 ON/OFF switch

About the controls’ setting values

The setting values of the controls, etc., below are controlled individually

for the respective decks in the Serato DJ software.

 TRIM control

 EQ (HI, MID, LOW) controls

 FILTER control

 Channel fader

 TEMPO slider

If the values controlled by Serato DJ when the decks are switched differ

from the positions of this unit’s controls, faders, etc., the controls, fad-

ers, etc., must be moved to the positions corresponding to the values

controlled by Serato DJ before they will operate.

 The default values for decks 3 and 4 in Serato DJ are the center

position for the [TRIM] controls, [EQ (HI, MID and LOW)] controls

and [FILTER] controls, ±0.0% for [TEMPO] sliders, and the frontmost

position for the channel faders.

Additional information

Acquiring the manual

The operating instructions may be in a file in PDF format. Adobe

Reader

must be installed to read files in PDF format. If you do not

have Adobe Reader, please install it from the download link on the

CD-ROM’s menu screen.

Downloading this unit’s operating

instructions

1 Insert the CD-ROM into the computer’s optical drive.

The CD-ROM menu is displayed.

If the CD-ROM’s menu does not appear when the CD-ROM is inserted,

perform the operations below.

 For Windows

Open the optical drive from [Computer (or My Computer)] in the

[Start] menu, then double-click the [CD_menu.exe] icon.

 For Mac OS X

In Finder, double-click the [CD_menu.app] icon directly.

2 When the CD-ROM’s menu is displayed, select [DDJ-

SR: Download the Operating Instructions (PDF file)], then

click [Start].

3 “An internet environment is required to access the

site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is

displayed.

4 On the Pioneer DJ support site, click “Manuals” under

“DDJ-SR”.

5 Click on the required language on the download

page.

Downloading of the operating instructions begins.

Downloading the Serato DJ software

manual

1 Insert the CD-ROM into the computer’s optical drive.

The CD-ROM menu is displayed.

If the CD-ROM’s menu does not appear when the CD-ROM is inserted,

perform the operations below.

 For Windows

Open the optical drive from [Computer (or My Computer)] in the

[Start] menu, then double-click the [CD_menu.exe] icon.

 For Mac OS X

In Finder, double-click the [CD_menu.app] icon directly.

2 When the CD-ROM’s menu is displayed, select [Serato

DJ: Download the Software Manual (PDF file)], then click

[Start].

3 “An internet environment is required to access the

site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is

displayed.

 To close the CD-ROM menu, click [Exit].

4 Click [Software Info] under [DDJ-SR] on the Pioneer DJ

support site.

[Serato DJ Support Information] is displayed.

5 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed.

6 Log in to your “Serato.com” user account.

Input the e-mail address and password you have registered to log in to

“Serato.com”.

7 From “More Downloads” on the right side of the

download page, click “Serato DJ x.x Software Manual”.

Downloading of the Serato DJ software manual starts.

About installation locations

 Do not place this unit on objects radiating heat, such as an amplifier,

or expose it to a spotlight for an extended period of time, as this may

damage this unit.

 Install this unit away from a tuner or a TV. Otherwise, image distor-

tion or noise may result. Also, image distortion or noise can easily

occur if an indoor antenna is used. In such cases, use an outdoor

antenna or disconnect the USB cable from this unit and turn off the

power.

Cleaning the product

Under normal circumstances, wipe it with a dry cloth. For hard-to-remove

stains, soak a soft cloth in a neutral detergent diluted with 5 to 6 times of

water, wring it thoroughly, wipe off the stains, and wipe the surface with

a dry cloth again. Do not use alcohol, thinner, benzene, or insecticide,

as these may peel off the printed label or the coated film. Avoid leaving

rubber or vinyl products in contact for an extended period of time, as

this may also damage the surface of the cabinet. When using chemical-

impregnated wipes, etc., read the cautions carefully.

Unplug the USB cable from this unit before cleaning.

Troubleshooting

 Incorrect operation is often mistaken for trouble or malfunction. If

you think that there is something wrong with this component, check

the items in the “Troubleshooting” section of this unit’s operating

instructions and the [FAQ] for the [DDJ-SR] on the Pioneer DJ sup-

port site.

http://pioneerdj.com/support/

Sometimes the problem may lie in another component. Inspect the

other components and electrical appliances being used. If the prob-

lem cannot be rectified, ask your nearest Pioneer authorized service

center or your dealer to carry out repair work.

 This unit may not operate properly due to static electricity or other

external influences. In this case, proper operation may be restored by

turning the power off, waiting 1 minute, then turning the power back

on.

English

About trademarks and registered

trademarks

 Pioneer is a registered trademark of PIONEER CORPORATION.

The names of companies and products mentioned herein are the trade-

marks of their respective owners.

Cautions on copyrights

Recordings you have made are for your personal enjoyment and accord-

ing to copyright laws may not be used without the consent of the copy-

right holder.

 Music recorded from CDs, etc., is protected by the copyright laws of

individual countries and by international treaties. It is the full respon-

sibility of the person who has recorded the music to ensure that it is

used legally.

 When handling music downloaded from the Internet, etc., it is the

full responsibility of the person who has downloaded the music to

ensure that it is used in accordance with the contract concluded

with the download site.

Specifications

General – Main Unit

Power supply ........................................................................................DC 5 V

Rated current ..................................................................................... 500 mA

Main unit weight .......................................................................4.5 kg (9.9 lb)

Max. dimensions ................553.6 mm (W) × 65.3 mm (H) × 319.1 mm (D)

(21.8 in. (W) × 2.6 in. (H) × 12.6 in. (D))

Tolerable operating temperature ........................................+5 °C to +35 °C

Tolerable operating humidity ...................... 5 % to 85 % (no condensation)

Audio Section

Rated output level

MASTER OUT1 .......................................................................... 4.2 Vrms

MASTER OUT 2 ......................................................................... 2.1 Vrms

BOOTH ....................................................................................... 2.1 Vrms

Total harmonic distortion

MASTER OUT ...............................................................................0.006 %

Frequency characteristic

USB, AUX, MIC ............................................................... 20 Hz to 20 kHz

S/N ratio (when playing on computer)

MASTER OUT ................................................................................ 101 dB

Input impedance

AUX ................................................................................................. 47 k:

MIC .................................................................................................. 10 k:

Output impedance

MASTER OUT ................................................................................... 1 k:

PHONES ............................................................................................32 :

USB AUDIO ......................................................................24 bit/Fs : 44.1 kHz

Input / Output terminals

AUX IN input terminal

RCA pin jacks ....................................................................................1 set

MIC terminal

Phone jack (Ø 6.3 mm) .....................................................................1 set

BOOTH OUT/MASTER OUT2 output terminal

RCA pin jacks ....................................................................................1 set

MASTER OUT1 output terminal

Phone jack (Ø 6.3 mm) .....................................................................1 set

PHONES output terminal

Stereo phone jack (Ø 6.3 mm) .........................................................1 set

Stereo mini phone jack (Ø 3.5 mm) .................................................1 set

USB terminal

B type .................................................................................................1 set

 For improvement purposes, specifications and design of this unit

and the included software are subject to change without notice.

UCP0212

PIONEER ELECTRONICS (USA) INC.

LIMITED WARRANTY

WARRANTY VALID ONLY IN THE U.S.A. AND CANADA

WARRANTY

Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by PUSA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing

defect when installed and operated according to the owner’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA,

without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA.

THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE

PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES

RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE

AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION

PREPAID, ONLY FROM WITHIN THE U.S.A. AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT .

PUSA WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN THE U.S.A.

PRODUCT WARRANTY PERIOD

Parts Labor

DJ Audio and Video ................................................................................................................................................................................... 1 Year 1 Year

The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.

WHAT IS NOT COVERED

IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY

OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS".

PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.

THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.

THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO RECORDS OR RECORDING TAPES OR DISCS, ANY

DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO

LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE

SPECIFIED IN THE OWNER’S MANUAL.

THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM

ANY SOURCE OTHER THAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED

BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE.

ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY

NO OTHER WARRANTIES

PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

TO OBTAIN SERVICE

PUSA has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you

need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it

carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to

prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business

hours.

On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-800-872-4159.

For hook-up and operation of your unit or to locate an

Authorized Service Company, please call or write:

CUSTOMER SUPPORT

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1720

LONG BEACH, CALIFORNIA 90801

1-800-872-4159

http://www.pioneerelectronics.com

DISPUTE RESOLUTION

Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint Resolution Program

to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise

any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.

To use the Complaint Resolution Program call 1-800-872-4159 and explain to the customer service representative the problem you are experiencing, steps you have taken

to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint

has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:

(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing

informing you why it will not take any action.

RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE

Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________

Purchased From ____________________________________________________________________________________________________________________________

KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE

Lorsque vous utilisez ce produit, vérifiez les

informations concernant la sécurité sous l’appareil.

D3-4-2-2-4_B1_Fr

Ce produit est destiné à une utilisation domestique

générale. Toute panne due à une utilisation autre qu'à

des fins privées (comme une utilisation à des fins

commerciales dans un restaurant, dans un autocar

ou sur un bateau) et qui nécessite une réparation

sera aux frais du client, même pendant la période de

garantie.

K041_A1_Fr

Milieu de fonctionnement

Température et humidité du milieu de fonctionnement :

De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité

relative inférieure à 85 % (orifices de ventilation non

obstrués)

N’installez pas l’appareil dans un endroit mal ventilé ou

un lieu soumis à une forte humidité ou en plein soleil

(ou à une forte lumière artificielle).

D3-4-2-1-7c*_A1_Fr

AVERTISSEMENT

Cet appareil n’est pas étanche. Pour éviter les risques

d’incendie et de décharge électrique, ne placez près de

lui un récipient rempli d’eau, tel qu’un vase ou un pot

de fleurs, et ne l’exposez pas à des gouttes d’eau, des

éclaboussures, de la pluie ou de l’humidité.

D3-4-2-1-3_A1_Fr

AVERTISSEMENT

Pour éviter les risques d’incendie, ne placez aucune

flamme nue (telle qu’une bougie allumée) sur

l’appareil.

D3-4-2-1-7a_A1_Fr

Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos ordures ménagères. Il existe un système de

collecte séparé pour les appareils électroniques usagés, qui doivent être récupérés, traités et recyclés conformément à la législation.

Les habitants des états membres de l’UE, de Suisse et de Norvège peuvent retourner gratuitement leurs appareils électroniques usagés aux

centres de collecte agréés ou à un détaillant (si vous rachetez un appareil similaire neuf).

Dans les pays qui ne sont pas mentionnés ci-dessus, veuillez contacter les autorités locales pour savoir comment vous pouvez vous débarrasser

de vos appareils.

Vous garantirez ainsi que les appareils dont vous vous débarrassez sont correctement récupérés, traités et recyclés et préviendrez de cette façon

les impacts néfastes possibles sur l’environnement et la santé humaine.

K058b_A1_Fr

Pour les États-Unis

Pour l’Europe

REMARQUE IMPORTANTE

LE NUMÉRO DE MODÈLE ET LE NUMÉRO DE SÉRIE

SE TROUVENT À L’ARRIÈRE OU SUR LE FOND DE

CET APPAREIL. NOTEZ CES NUMÉROS À LA PAGE

15 POUR VOUS Y RÉFÉRER ULTÉRIEUREMENT.

D36-AP9-3*_A1_Fr

Pour les

tats-Unis et le Canada

La protection de votre ouïe est entre vos

mains

Pour assurer le rendement optimal de votre matériel

et – plus important encore – la protection de votre ouïe,

réglez le volume à un niveau raisonnable. Pour ne pas

altérer votre sens de la perception, le son doit être clair

mais ne produire aucun vacarme et être exempt de

toute distorsion. Votre ouïe peut vous jouer des tours.

Avec le temps, votre système auditif peut en effet

s’adapter à des volumes supérieurs, et ce qui vous

semble un « niveau de confort normal » pourrait au

contraire être excessif et contribuer à endommager

votre ouïe de façon permanente. Le réglage de votre

matériel à un volume sécuritaire AVANT que votre ouïe

s’adapte vous permettra de mieux vous protéger.

CHOISISSEZ UN VOLUME SÉCURITAIRE:

9 Réglez d’abord le volume à un niveau inférieur.

9 Montez progressivement le volume jusqu’à un niveau

d’écoute confortable ; le son doit être clair et exempt

de distorsions.

9 Une fois que le son est à un niveau confortable, ne

touchez plus au bouton du volume.

N’OUBLIEZ PAS DE RESPECTER LES

DIRECTIVES SUIVANTES:

9 Lorsque vous montez le volume, assurez-vous de

pouvoir quand même entendre ce qui se passe

autour de vous.

9 Faites très attention ou cessez temporairement

l’utilisation dans les situations pouvant s’avérer

dangereuses.

9 N’utilisez pas des écouteurs ou un casque d’écoute

lorsque vous opérez un véhicule motorisé ; une telle

utilisation peut créer des dangers sur la route et est

illégale à de nombreux endroits.

S001a_A1_Fr

Lorsque vous utilisez ce produit, vérifiez les

informations concernant la sécurité sous l’appareil.

D3-4-2-2-4_B1_Fr

Milieu de fonctionnement

Température et humidité du milieu de fonctionnement :

De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité

relative inférieure à 85 % (orifices de ventilation non

obstrués)

N’installez pas l’appareil dans un endroit mal ventilé ou

un lieu soumis à une forte humidité ou en plein soleil

(ou à une forte lumière artificielle).

D3-4-2-1-7c*_A1_Fr

AVERTISSEMENT

Cet appareil n’est pas étanche. Pour éviter les risques

d’incendie et de décharge électrique, ne placez près de

lui un récipient rempli d’eau, tel qu’un vase ou un pot

de fleurs, et ne l’exposez pas à des gouttes d’eau, des

éclaboussures, de la pluie ou de l’humidité.

D3-4-2-1-3_A1_Fr

AVERTISSEMENT

Pour éviter les risques d’incendie, ne placez aucune

flamme nue (telle qu’une bougie allumée) sur

l’appareil.

D3-4-2-1-7a_A1_Fr

Français

Informations préliminaires

Comment lire ce manuel

 Merci pour l’achat de ce produit Pioneer.

Prière de lire cette brochure et le mode d’emploi ! Les deux docu-

ments contiennent des informations importantes qui doivent être

comprises avant d’utiliser ce produit.

Cela fait, conservez le mode d’emploi de façon à pouvoir vous y

référer en cas de nécessité.

— Pour les instructions sur l’acquisition du mode d’emploi, repor-

tez-vous à Obtention du manuel (p. 13).

 Dans ce manuel, les noms d’écrans et de menus s’affichant sur

le produit et sur l’écran de l’ordinateur, de même que les noms de

touches et de prises, etc. sont indiqués entre parenthèses. (Ex. :

Touche [CUE], panneau [Files], prise [MIC])

 Veuillez noter que les écrans et les caractéristiques techniques

du logiciel décrit dans ce manuel, ainsi que l’aspect externe et les

caractéristiques techniques du matériel sont en cours de déve-

loppement de sorte que les caractéristiques finales peuvent être

différentes.

 Veuillez noter que selon la version du système d’exploitation, les

réglages du navigateur web, etc., le fonctionnement peut être diffé-

rent des marches à suivre indiquées dans ce mode d’emploi.

Contenu du carton d’emballage

 CD-ROM (Disque d’installation)

 Câble USB

 Garantie (pour certaines régions)

 A lire avant l’utilisation (Important)/Guide de démarrage rapide (ce

document)

1 La garantie incluse est destinée à la région européenne.

 Pour la région nord-américaine, les informations correspon-

dantes se trouvent à la dernière page des versions anglaises et

françaises des “A lire avant l’utilisation (Important)/Guide de

démarrage rapide”.

 Pour la région japonaise, les informations correspondantes se

trouvent à la dernière page de la version japonaise des “A lire

avant l’utilisation (Important)/Guide de démarrage rapide”.

Installation du logiciel

Avant d’installer le pilote

Pour la toute dernière version du logiciel Serato DJ, accédez à Serato.

com et téléchargez le logiciel de ce site.

 Pour le détail, reportez-vous à Marche à suivre (Windows) ou

Marche à suivre (Mac OS X).

 Les préparatifs concernant l’ordinateur, les dispositifs réseau et

l’environnement Internet nécessaires à la connexion Internet sont

du ressort de l’utilisateur.

À propos du pilote (Windows)

Ce logiciel est un pilote ASIO prévu exclusivement pour transmettre des

signaux audio de l’ordinateur.

 Il n’est pas nécessaire d’installer le pilote dans le cas de Mac OS X.

Vérification des toutes dernières informations

concernant le pilote

Pour de plus amples informations sur le pilote prévu pour cet appareil,

reportez-vous au site de support DJ de Pioneer ci-dessous.

http://pioneerdj.com/support/

À propos du logiciel Serato DJ

Serato DJ est une application logicielle DJ de Serato. En reliant l’ordi-

nateur sur lequel ce logiciel est installé à cet appareil, il est possible

d’effectuer des performances DJ.

Environnement fonctionnel minimal

Systèmes d’exploitation pris en charge

Mac OS X : 10.8, 10.7 et 10.6

Windows : Windows 7

Divers

Lecteur optique Lecteur de disque optique pouvant lire le CD-ROM

Port USB

Un port USB 2.0 est indispensable pour raccorder cet

ordinateur à cet appareil.

Résolution de l’écran Résolution de 1 280 x 720 ou plus

Connexion Internet

Une connexion Internet est nécessaire pour l’enregis-

trement du compte utilisateur sur “Serato.com” et pour

le téléchargement du logiciel.

 Pour les toutes dernières informations sur l’environnement opérationnel et la

compatibilité ainsi que pour acquérir le tout dernier système d’exploitation,

reportez-vous à “Software Info” dans “DDJ-SR” sur le site de support DJ de

Pioneer ci-dessous :

http://pioneerdj.com/support/

 L’assistance pour le système d’exploitation présuppose que vous utilisez la toute

dernière édition de cette version.

 Le fonctionnement sur tous les ordinateurs n’est pas garanti, même lorsque les

conditions de fonctionnement mentionnées ci-dessus sont remplies.

 Selon les réglages d’économie d’énergie de l’ordinateur, etc. la capacité de

traitement du processeur et du disque dur peut être insuffisante. Lorsque vous

utilisez Serato DJ, assurez-vous que l’ordinateur est en état de fournir sa perfor-

mance optimale (par exemple en laissant le cordon d’alimentation raccordé),

surtout s’il s’agit d’un ordinateur portable.

 L’emploi d’Internet exige la signature d’un contrat séparé avec un fournisseur de

services Internet et le paiement de droits.

À propos de l’installation

La marche à suivre pour l’installation dépend du système d’exploitation

(OS) de l’ordinateur utilisé.

Pour Windows

Après avoir installé le pilote, installez le logiciel Serato DJ.

Pour Mac OS X

Installez seulement le logiciel Serato DJ.

Marche à suivre (Windows)

Ne raccordez cet appareil et l’ordinateur que lorsque l’installation est

terminée.

 Connectez-vous sous le nom de l’utilisateur spécifié comme admi-

nistrateur de l’ordinateur avant l’installation.

 Si des programmes sont ouverts sur l’ordinateur, fermez-les.

1 Insérez le CD-ROM dans le lecteur optique de

l’ordinateur.

Le menu du CD-ROM apparaît.

 Si le menu du CD-ROM n’apparaît pas après l’insertion du CD-ROM,

ouvrez le lecteur optique dans [Ordinateur (ou Poste de travail)]

à partir du menu [Démarrer], puis double-cliquez sur l’icône

[CD_menu.exe].

2 Lorsque le menu du CD-ROM apparaît, sélectionnez

[Installer le Logiciel de pilotage (Pioneer_DDJ_SR_

Driver_x.xxx.exe)], puis cliquez sur [Demarrer].

 Pour fermer le menu du CD-ROM, cliquez sur [Quitter].

La pagina si sta caricando...

Pioneer DDJ-SR Guida Rapida

Marca: Pioneer

Modello: DDJ-SR

Categoria: Controller DJ

Tipo: Guida Rapida

Scarica PDF

rapporto

in altre lingue

English: Pioneer DDJ-SR Quick start guide
français: Pioneer DDJ-SR Guide de démarrage rapide
Deutsch: Pioneer DDJ-SR Schnellstartanleitung
Nederlands: Pioneer DDJ-SR Snelstartgids

Pioneer DDJ-SR Guida Rapida

Pioneer DDJ-SR Guida Rapida

in altre lingue

Documenti correlati

Altri documenti