Bartscher 2951121 Istruzioni per l'uso

GASH ERD E MIT G A SBACK OFEN

GAS STOVE WITH GAS OVEN

FOURNEAU À GAZ AVEC FOUR À GAZ

CUCINA A GAS CON FORNO A GAS

COCINA A GAS CON HORNO A GAS

FOGÕES A GÁS COM FORNO A GÁS

GASFORNUIS MET GASOVEN

KUCHNIA GAZOWA Z PIEKARNIKIEM

GAZOWYM

Rev.-Nr.: 01-2017

INSTALLATIONS-, BEDIENUNGS-

UND WARTUNGSANWEISUNGEN

INSTALLATION, OPERATING

AND MAINTENANCE NSTRUCTIONS

MANUEL D'INSTALLATION,

D'UTILISATION ET D'ENTRETIEN

MANUALE DI INSTALLAZIONE,

USO E MANUTENZIONE

MANUAL DE INSTALACIÓN,

USO Y MANTENIMIENTO

MANUAL DE INSTALAÇÃO,

UTILIZAÇÃO E MANUTENÇÃO

HANDLEIDING VOOR INSTALLATIE,

GEBRUIK EN ONDERHOUD

W SK AZÓW KI DOT YCZĄ CE INSTALACJI,

UŻYTKOW ANIA I KONS ERWACJI

DE

GB

FR

IT

ES

PT

NL

PL

2951131 / FA092M00

2951121 / FA093M00

2952171 / FAG92M00

2952291 / FAG93M00

TECHNISCHE ÄNDERUNGEN VORBEHALTEN!

TECHNICAL CHANGES RESERVED!

SOUS RÉSERVE DE MODIFICATIONS TECHNIQUES !

CI RISERVIAMO LA POSSIBILITÀ DI INTRODURRE MODIFICHE TECNICHE!

¡SE RESERVA EL DERECHO A INTRODUCIR MODIFICACIONES TÉCNICAS!

SUJEITO A ALTERAÇÕES TÉCNICAS!

TECHNISCHE WIJZIGINGEN VOORBEHOUDEN!

WPROWADZANIE ZMIAN TECHNICZNYCH ZASTRZEŻONE!

PL

IT

DE

PT

NL

ES

FR

GB

1

ENGLISH

GB

1. TABLE OF CONTENTS

1. TABLE OF CONTENTS ..................................................................................................................... 1

2. INDEX ................................................................................................................................................. 2

3. SAFETY .............................................................................................................................................. 3

4. GENERAL INFORMATION AND WARNINGS ................................................................................... 4

4.1. General guidelines ................................................................................................................... 4

4.2. Description of the appliance ..................................................................................................... 4

4.3. Protection appliances ............................................................................................................... 5

4.4. Rating plate .............................................................................................................................. 5

4.5. Replacement of components (service technician) ................................................................... 6

5. USE AND OPERATION ..................................................................................................................... 6

5.1. Description of the controls. ....................................................................................................... 6

5.2. Ignition of gas stove burners .................................................................................................... 7

5.3. Ignition of oven burners ............................................................................................................ 7

5.4. Guidelines on how to use the device ....................................................................................... 8

6. CLEANING AND MAINTENANCE ..................................................................................................... 8

6.1. Guidelines on cleaning and maintenance ................................................................................ 8

6.2. Proper maintenance ................................................................................................................. 8

6.3. Cleaning of the heating plate ................................................................................................... 9

6.4. Cleaning of the oven ................................................................................................................ 9

7. TROUBLESHOOTING ..................................................................................................................... 10

8. INSTALLATION ................................................................................................................................ 11

8.1. Packaging and unpacking ...................................................................................................... 11

8.2. Installation (service technician) .............................................................................................. 11

8.3. Extraction of fumes ................................................................................................................. 12

8.4. Installation of the appliance in a line ...................................................................................... 12

8.5. Gas connection (service technician) ...................................................................................... 12

8.6. Switching into different gas type (service technician) ............................................................ 13

8.7. Inspection (service technician) ............................................................................................... 13

9. SETTINGS (service technician)........................................................................................................ 13

9.1. Minimum setting of the hob burner valve ............................................................................... 14

9.2. Minimum setting of the oven burner valve ............................................................................. 14

9.3. Replacement of nozzle and adjustment of gas stove burner primary air supply ................... 15

9.4. Replacement of the ignition flame nozzles of the gas stove burners ..................................... 15

9.5. Replacement of nozzle and adjustment of oven burner primary air supply ........................... 16

9.6. Replacement of the ignition flame nozzle of the oven burners .............................................. 16

10. APPLIANCE DISPOSAL .................................................................................................................. 17

ATTACHMENTS ....................................................................................................................................... I

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten phone: +49 (0) 5258 971-0

Germany fax: +49 (0) 5258 971-120

2

ENGLISH

GB

2. INDEX

A

Adjustment of gas burner primary air supply 15

Adjustment of oven burner primary air supply 16

APPLIANCE DISPOSAL 17

C

Cleaning of the heating plate 9

Cleaning of the oven 9

D

Description of the appliance 4

Description of the controls 6

E

Extraction of fumes 12

G

Gas connection 12

General guidelines 4

Guidelines on cleaning and maintenance 8

Guidelines on how to use the device 8

I

Ignition of gas stove burners 7

Ignition of oven burners 7

Inspection 13

Installation 11

Installation of the appliance in a line 12

M

Minimum setting of the hob burner valve 14

Minimum setting of the oven burner valve 14

O

Oven - safety thermostat 5

P

Packaging 11

Proper maintenance 8

Protection appliances 5

R

Rating plate 5

Replacement of components 6

Replacement of nozzle 15, 16

Replacement of the ignition flame nozzle of the oven

burners 16

Replacement of the ignition flame nozzles of the gas

stove burners 15

S

SAFETY 3

SETTINGS 13

Switching into different gas type 13

T

TROUBLESHOOTING 10

U

Unpacking 11

3

ENGLISH

GB

3. SAFETY





 Read carefully the guidelines and

instructions in the instruction manual

before you use the appliance.

The instruction manual contains general

information on how to safely use and maintain the

appliance.

Retain the manual for future reference.

The manufacturer took extra care when designing

and manufacturing to prevent any safety or health

hazard to the personnel operating the appliance.

Please read carefully the guidelines in the

instruction manual and instructions placed directly

onto the appliance. Above all, observe all the

safety instructions.

Do not intervene in or remove the protective

appliances installed in the appliance. Non-

compliance may lead to severe safety and health

hazard against people. We recommend to perform

a few tests to know the layout and main functions

of the control panel, particularly those to switch

the appliance on and off.

The appliance is intended only for the use it has

been designed for and any other use is

considered as the use not in compliance with the

intended use.

The manufacturer is not liable for material

damage or damage to person caused by

misapplication or incorrect application of the

appliance.

Any maintenance work that requires special

technical licence or special skills may be

performed by qualified personnel only.

To provide hygiene and protect foods from dirt, all

the elements that have direct or indirect contact

with the foods and all border areas must be

thoroughly cleaned. Use only the cleaning agents

intended for use in contact with food and avoid

using flammable agents or harmful to health.

After each use of the appliance

make sure that all the heating

elements and control elements have

been switched off and the gas supply

connections are disconnected.





 The device requires some safety measures

during installation, positioning, fixing, and connecting

to the power supply (section 8 “INSTALLATION”).



 

 In case of longer standstill disconnect all

power supply cables and thoroughly clean the

inside and outside elements of the device (section

6 “CLEANING AND MAINTENANCE”).



 

 Do not clean the device with direct

stream of water.

4

ENGLISH

GB

4. GENERAL INFORMATION AND WARNINGS

4.1. General guidelines

The manual has been edited by the manufacturer

to provide the authorized personnel with the

information necessary to work with the appliance.

We recommend the intended readers to read the

manual carefully and comply with the information.

By reading the information contained in the

manual, hazards against people health and safety

may be prevented.

Retain the manual in an easily available place

throughout the time of use of the appliance to

have access and refer to the required information

at any time.

Special symbols, described below, have been

used to stress important information or draw

attention to essential data:

Caution - warning

Indicate important safety

instructions. You should acquire the

proper conduct to prevent hazard

against people health and safety or not

to cause any damage.

Important







Indicate essentials technical data that

you cannot ignore.

4.2. Description of the appliance

THE GAS STOVE WITH GAS OVEN, called

hereinafter the device, has been designed and

manufactured for preparation of food products in

the professional gastronomy sector.

1) Hob

2) Oven

3) Adjustable feet

4) Gas connection

5) Gas burner: made from enameled cast

iron of various power, depending on

diameter.

6) Oven smoke extraction

7) Piezoelectric ignition for gas oven burner

8) Gas oven control knob: it adjusts the gas

supply to gas stove burners

9) Temperature control knob: it adjusts the

gas supply to the oven burner

1

2

3

4

5

6

9

8

ID 01

7

5

ENGLISH

GB

4.3. Protection appliances

The device is equipped with the following

protection systems. The drawing presents layout

of the devices.

1. Gas valve: for opening and closing the gas

supply line.

2. Safety thermocouple: cuts off the gas supply

if the flame goes out.

3. Oven-safety thermostat: in case of

overheating, the gas supply to the oven is cut

off.

Check every day that the

protection devices are mounted

correctly and operational.

4.4. Rating plate

The rating plate shown in the drawing is fixed

directly on the device. It includes all guidelines

and information required for safe use.

1) EAN number

2) Art. no./ model no. / CE certificate no.

3) Category of device / type of design

4) Power / gas consumption / Factory setting

for specified gas type

5) Heat load

6) Production date

7) Series no.

8) CE Declaration of Conformity

9) WEEE symbol

3



Safety

thermostat

of the oven

Oven burner

protection

Gas stove burner

protection

ID

03

1

2

8

3

4

6

7

5

9

6

ENGLISH

GB

4.5. Replacement of components (service technician)

Before exchange of the

component switch on all the existing

protection appliances. First of all,

switch off the gas valve and prevent

access to the appliance, which in the

case of activation may lead to

unexpected situations endangering

the safety and health of people.

If necessary, exchange the used components to

the original spare parts.







We are not liable for personal injury or

damage to the components that arise due to

application of other spare parts than original

or intervention into the appliance without the

manufacturer’s consent that may have altered

the safety requirements.

5. USE AND OPERATION

5.1. Description of the controls.

The elements controlling the essential functions

are located on the control panel of the device.

A) Gas stove burner control knob: to

ignite, switch off or adjust a relevant

burner of the gas stove.

B) Oven burner control knob: to ignite, switch

off or adjust the oven burner.

C) Piezoelectric ignition: to ignite the

ignition flame of the oven burner.

Ignition flame

symbol

Front burners

indicator

Maximum

power

symbol

Minimum

power

symbol

Oven

temperature

Rear burners

indicator

Piezoelectric

ignition

Oven

temperature

control knob

A

B

C

7

ENGLISH

GB

5.2. Ignition of gas stove burners

IGNITION

A) Press the control knob of the selected gas

stove burner and turn it left in order to ignite the

ignition flame (position 1). Ignite the ignition

flame with use of a match.

B) Hold the control knob pressed for approx. 10

seconds in order to heat up the thermal

element; then release the controller.

C) To ignite the gas stove burner, turn the control

knob left (position 2).

D) Set the power of the gas stove burner

(position 3).

SWITCHING OFF

A) Turn the control knob right in order to switch

the gas stove burner off (position 1).

B) To put out the ignition flame rotate the control

knob clockwise (position 0).

5.3. Ignition of oven burners

A) Press the control knob and turn it left, while

simultaneously pressing the piezoelectric

ignition a few times (C), in order to ignite the

ignition flame (position 1). Hold the control

knob pressed for approx. 10 seconds in order

to heat up the thermal element.

Hint: Ignition flame may be also ignited

manually using a match through the cover

at the oven bottom.

B) Turn the control knob left, set the

temperature between 60°C and 280°C

and wait until the oven heats up

(position 2).

Temperature °C 60 90 120 160 200 240 280 300

Time in minutes 3 6 9 12 15 18 22 26

Pos 0

Pos 1

Pos 2

ID

05

Pos. 1

Pos. 2

Pos. 3

Pos. 0

ID 04

8

ENGLISH

GB

5.4. Guidelines on how to use the device

When the device will not be used for a longer

time, follow the instructions below:

1. Close the gas cut-off valve.

2. Thoroughly clean the device and adjacent

surfaces.

3. Apply the food grade vaseline on the stainless

steel surfaces.

4. Perform all maintenance works.

5. Leave the device uncovered, with opened

cooking chambers.

To ensure correct use of the device follow the

guidelines below:





 Use only accessories provided by the

manufacturer;





 Check if the oven bottom is properly installed.





 Heat the oven before use.







Do not use the oven with partially

opened door.



 

 Use upper shelf guides to cook

dishes in the oven





 The device and its vicinity should be always

kept clean.





 Use only food grade cleaning agents.

6. CLEANING AND MAINTENANCE

6.1. Guidelines on cleaning and maintenance

Before the maintenance works

turn on all installed protective devices.

First of all, close the gas valve and

prevent access to the appliance, which

in the case of activation may lead to

unexpected situations endangering

the safety and health of people.

6.2. Proper maintenance

Proper maintenance includes daily cleaning of all

components which have contact with food

products, and regular maintenance of the burner

and nozzles.

Thorough maintenance ensures the best

performance, longer life of the device, and proper

operation of the protective devices.

Never direct the water stream or high pressure jet

towards the device.

To clean the stainless steel, do not use iron wool

or iron brush as they may leave iron particles on

the surface that form rust in result of oxidation.

Use the wooden or plastic spatula, or soft

cleaning sponge to remove the dried remains.

In case of prolonged standstill apply the vaseline

oil onto all the stainless steel surfaces.

Do not use any clearing agents

that contain substances hazardous or

harmful to health (solvents, petrol. etc.).

Regularly instruct the specialist personnel to

perform the following maintenance works:





 Control of gas system pressure and tightness





 Control of thermal elements operation





 Control of operation of the extractor and

possible cleaning





 Control and possible lubrication of gas valves

9

ENGLISH

GB

6.3. Cleaning of the heating plate

Follow the instructions below.

 Remove the pan support of the gas

stove burners (A).

 Remove the flame distributor B.

 Thoroughly clean the burner body (C) and

flame distributor (B).

 Thoroughly clean the recess D with use of

soft cloth and neutral cleaning agent.

 Thoroughly dry the cleaned surfaces and

replace all elements.

Protect the interior of the gas

stove burner against water and dirt, to

avoid malfunction and clogging of

nozzles.

6.4. Cleaning of the oven

When the oven is cold remove bottom and grills.

After cleaning switch the empty oven on to avoid

corrosion.

Follow the instructions below:

 Remove the oven bottom (A) and grill (B) and

clean them thoroughly.

 Clean the oven interior from any burnt

residuals which may disturb correct operation.

 Thoroughly dry the cleaned surfaces and

replace all elements.

B

A

ID

07

A

B

C

D

ID 06

10

ENGLISH

GB

7. TROUBLESHOOTING

The information below is provided to recognize

and repair any failures that may occur when

operating the appliance.

Some of the failures can be repaired by the user,

others require thorough specialist knowledge.

Such problems may be solved exclusively by the

qualified personnel.

Problem Cause Solution

Gas smell.

The smell is sometimes

released when extinguishing

the flame.

Close the gas valve and ventilate the

room.

The ignition flame does not start.

The spark ignition does not

work.

Check operation of ignition devices.

Ignite the flame manually.

Air in the pipes in connection

with the long downtime.

The igniting flame continuously

goes out.

The thermal element is not

sufficiently hot.

Extend the ignition process.

The ignition flame burns, but the

igniter does not ignite the burner.

Check the thermostat. Inspect a

relevant protection device.





 When problem persists

contact the service company

Yellow flame.

The burner is contaminated or

moist.

Clean the burner and leave for

drying. 



 When problem

persists contact the service

company.

It is difficult to rotate the burner

control knob.

Damaged gas valve.





 Contact the service company.

The oven does not reach the

preset temperature.

Damaged operational

thermostat.

Replace the part.





 Contact the service company.

The safety thermostat tripped.

Wait for the oven to cool down.

Then reset the safety thermostat.

11

ENGLISH

GB

8. INSTALLATION

8.1. Packaging and unpacking

During unloading and when installing the

appliance follow the information from the

manufacturer placed directly on the packaging

and in this manual.

To lift and transport the product plan to use a fork

lift or stacker, and pay attention to even weight

distribution to avoid a risk of tilting of the

packaging (avoid excessive incline!).

While using the elevator pay

attention to the gas supply hoses and

position of feet.

The packaging consists of the carton packaging

and wooden pallet. There are symbols printed on

the carton packaging that according to the

international agreements inform about the

regulations to follow when loading and unloading,

transporting and storing the appliance.

When collecting the goods check if the packaging

is complete and has not been damaged during

transport.

Any damage should be immediately reported to

the shipping company.

Unpack the appliance as soon as possible to

check if the appliance is not damaged.

Do not use a sharp object to cut the carton box. It

may damage the stainless steel inside the box.

Remove the carton packaging from bottom to top.

When unpacked check if the appliance is

according to the order.

In case of any difference inform the sales agent

immediately.

Do not store the packaging

materials (nylon bags, polystyrene

foam, clips ...) in the reach of children!

Remove the protective PVC layer from the out

and inner surfaces. If possible, do not use any

metal tools.

8.2. Installation (service technician)

All the stages of the installation must be carefully

planned.

The location should be equipped with all supply

connections and production waste outlet. The

location should also be properly lit and comply

with all hygiene and sanitary requirements

according to the binding regulations.

The appliance should be installed with the

minimum 5 cm clearance from the wall, if the

wall is not resistant to the minimum temperature

of 150 °C.



 

 The devices with the oven must be

installed at least 50 cm from the wall.

Locate the appliance in the horizontal position by

adjusting the single feet.

To ensure the correct operation

of the appliance, the appliance must

be installed and operated in the

thoroughly ventilated room only.

50

ID

08

5 cm

THIS

SIDE UP

CAUTION

GLASS

KEEP DRY

12

ENGLISH

GB

When the device is to be

installed near the walls, partitions,

kitchen cabinets, decorative elements,

etc., they must be made from non-

flammable materials or covered with

suitable non-flammable materials.

Internal installation of the gas supply and the rooms

in which the device is housed must comply with the

local regulations applicable in the country in which

the device is used (Regulation of 12th of July 1996

and UNI-CIG 87/23).

In order to ensure proper gas burning in the

burners the required volume of air, i.e. approx. 2

cubic meters per hour for every kW of installed

power, must be supplied.

8.3. Extraction of fumes

The fumes from the stove should be continuously

extracted with use of kitchen extraction hoods

connected to the extraction dusts or stacks, or

extracting directly outside. When no kitchen

extraction hood may be installed, use the fan for

direct extraction outside, connected in such way

that lock of suction fan interrupts the gas supply.

Installation of stoves of type “A” does not

envisage connection to the fume exhaust system,

but to the appropriate extraction hood which

removes the fumes outside.

8.4. Installation of the appliance in a line

To fix the appliance in a line (neighbouring) follow

the steps:

Dismantle the control panel, and remove the cast

iron frame from the chimney if necessary.

Apply the sealing tape (A) onto the joining sides.

Place the appliances next to each other and in a

horizontal position (by adjusting the feet).

Connect the appliances with the joining elements.

8.5. Gas connection (service technician)

The gas connection must be performed in

compliance with the applicable regulations.

Before connecting the device check the technical

data, type of gas, working pressure and flow rate

which are provided on the rating plate.

The installation is performed by connecting the

connection pipe of the device with a pipe of the

gas distribution network. The cut-off valve must be

installed on the connection to shut the gas supply

off if necessary.

A

B

C

13

ENGLISH

GB

If there are significant pressure differences in the

gas supply installation, it is recommended to

install a pressure regulator.

After the installation, check the gas connection for

tightness.

When looking for gas leaks do

not use the open flame!

8.6. Switching into different gas type (service technician)

The device has been checked by the

manufacturer for the type of gas shown on the

rating plate. If a different type of gas is used,

follow these guidelines.

1. Close the gas cut-off valve (A).

2. Replace the nozzles of gas burners (see

section 9.3).

3. Replace the nozzles of the ignition flames (see

section 9.4).

4. Set the minimum value on the burners gas

valves (see section 9.1).

5. Remove the sticker from the rating plate and

apply a new sticker which includes used gas

type (item 4 of the rating plate).

8.7. Inspection (service technician)

Before starting the device the installation check-

up should be run to evaluate the working

conditions of every single component and

recognize any errors.

To check the heating plate it is recommended to

perform the following inspections:

1. Open the gas valve and check the tightness of

connections;

2. Check correct ignition and combustion of gas

stove burners;

3. Check and adjust, if necessary, the gas

pressure and flow rate in Max and Min

positions (see section 9.1).

4. Check if the safety thermostat operates

properly.

5. Check gas lines for gas leaks.

9. SETTINGS (service technician)

Before setting the device switch

on all protection devices.

First of all, close the gas valve and

prevent access to the device, which in

case of activation may lead to

unexpected situations endangering the

safety and health of people.

ID 12

14

ENGLISH

GB

9.1. Minimum setting of the hob burner valve

These settings are required only if the connected

gas type differs from the factory preset and

checked gas, after switching to the different gas

type.

Before performing this setting check whether the

gas pressure is compliant with the value of nominal

pressure (see table in the appendices).

Follow the instructions below.

1. Close the gas cut-off valve.

2. Pull the control knob (A).

3. Unscrew screws B and remove the control

panel (C).

4. Slowly move the button from position (7)

clockwise to the minimum flow position (D)

(just before the blockade). Turn the screw

(D) counterclockwise in order to increase

the gas flow. After setting tighten the screw.

5. Finally reinstall the control panel (C) and

control knob (A).

9.2. Minimum setting of the oven burner valve

These settings are required only if the connected

gas type differs from the factory preset and

checked gas, after switching to the different gas

type.

Before performing this setting check whether the

gas pressure is compliant with the value of nominal

pressure (see table in the appendices).

Follow the instructions below.

1. Close the gas cut-off valve.

2. Pull the control knob (A).

3. Unscrew screws B and remove the control

panel (C).

4. Remove the injection nozzle D and replace

it with the one suitable for used gas type

(see appendices). After setting tighten the

screw.

5. Finally reinstall the control panel (C) and

control knob (A).



 

 After completing all calibration and

settings, check the tightness of gas system

and proper operation of the device.

Make sure that the flame is stable with

minimum or maximum output pressure.

When the setting is done, install the prepared

seal and/or seal the adjustment screws.

C

A

B

D

C

A

B

ID

09

ID

13

15

ENGLISH

GB

9.3. Replacement of nozzle and adjustment of gas stove burner primary air supply

Follow the instructions below.

 Close the gas cut-off valve.

 Remove the gas burners grates (A).

 Remove the flame distributor (B) and

burner body (C).

 Remove the recesses (D).

 Loosen the screw E and set the Venturi pipe

(F).

 When required, replace the nozzle (G) with a

nozzle intended for used gas (see

appendices).

 Tighten the screw E and restore the initial

settings.

9.4. Replacement of the ignition flame nozzles of the gas stove burners

Follow the instructions below.

 Close the gas cut-off valve.

 Remove the gas burners grates (A).

 Remove the flame distributors (B)

and burners bodies (C).

 Remove the recesses (D).

 Replace the gas burner ignition flame

nozzles (E).

 Restore the initial settings.

E

B

C

A

D

H

E

F

B

C

A

D

G

ID 06

ID 15

16

ENGLISH

GB

9.5. Replacement of nozzle and adjustment of oven burner primary air supply

Follow the instructions below.

 Close the gas cut-off valve.

 Remove the lower panel of the oven (A).

 When required, replace the nozzle (B) with a

nozzle intended for used gas (see

appendices).

 Loosen screw C and set the Venturi pipe (D).

 Tighten the screw (C) and restore the initial

settings.

9.6. Replacement of the ignition flame nozzle of the oven burners

Follow the instructions below.

 Close the gas cut-off valve.

 Remove the oven bottom (A) and grill (B).

 The ignition flame is assigned to the burner.

 Loosen the nut (D).

 Remove the nozzle (E) and replace it with a

nozzle intended for the used gas (see

attached tables).

 Tighten the nut and restore the initial settings.

A

B

ID

07

D

E

H

A

B

C

D

GN

2/1

17

ENGLISH

GB

10. APPLIANCE DISPOSAL







The appliance is marked in conformity

with the European Directive 2002/96/EG

WASTE ELECTRICAL AND ELECTRONIC

EQUIPMENT (WEEE).

By disposing the appliance in

accordance with the regulations the

user contributes towards prevention of

adverse effects on environment and

health.

The symbol on the product or attached

manual indicates that the product cannot be

considered as ordinary household waste and

should be transferred to a special collection point

for electrical and electronic appliances for

recycling.

Local waste management regulations should be

observed.

Further information on procedure, reusing and

recycling of the product is available in local

offices, waste management unit or with the

product sales agent.

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten phone: +49 (0) 5258 971-0

Germany fax: +49 (0) 5258 971-120

I

ANLAGEN

ATTACHMENTS

ANNEXES

ALLEGATI

ANEXOS

BIJLAGEN

ZAŁĄCZNIKI

La pagina sta caricando ...

Bartscher 2951121 Istruzioni per l'uso

Questo manuale è adatto anche per

Bartscher 2951121 Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti