Jole i-Gemm™ 3 Manuale utente

ECE R129/03

Child height 40cm-85cm/ Child weight≤13kg;

ECE R129/03

i-Size universal ISOFIX

ECE R129/03

Child height 40cm-85cm/ Child weight≤13kg;

ECE R129/03

i-Size universal ISOFIX

enhanced infant child restraint

™

i-Gemm 3

NO Sikkerhetshåndbok

ET Kasutusjuhend

LT Naudojimo vadovas

LV Lietošanas instrukcija

ECE R129/03

Child height 40cm-85cm/ Child weight≤13kg;

12

34

1

53

1

2

6

12

7

9

1

2

8

11

1

22

10

21

12

3

1

24

13

3

1

2

14

15 16

1

2

17 18

19 20

21 22

23

26

28

25

24

27 28

29

31 32

30

33 34

!! !!

35

!!

36

37 38

39 40

1 2

41 42

43

1

44

1

45 46

47 48

50

49

1

Please make sure there are no missing parts. Please contact the

retailer if anything is missing.

25

17

18

20 22

23

24

2

3

4

5

6

7

8

9

10

11

12

19

13

14

15

16

21

1

1 Head Support

2 Seat Pad

3 Stroller Fix Release

Button A

4 Side Guide

5 Infant Insert

6 Adjustment Webbing

7 Harness Adjustment

Button

8 Shoulder Harness

9 Canopy Mount

10 Canopy

11 Harness Connectors

12 Harness Buckle

13 Handle

14 Handle Button

Parts List

15 Rear Guide

16 Stroller Fix Release

Button B

17 ISOFIX Connector

18 Shell Indicator

19 ISOFIX Guides

20 Load Leg

21 Load Leg Adjust

Button A

22 Load Leg Indicator

23 Load Leg Adjust

Button B

24 Infant Carrier Module

Release Button

25 Lock-off

GB Welcome to Joie™

You have purchased a high quality﹐fully certified enhance child safety

enhanced child restraint. This product is suitable for the use of child’s

height and weight up to 85cm and 13kg.

Carefully read this Instruction Manual and follow the installing steps be-

cause this is the ONLY way to protect your child from serious injury or

death in case of an accident﹐ and to provide comfort to your child while

using this product.

Keep this instruction manual for future reference.

Please confirm

To use this Joie enhanced Infant child restraint according to the UN

Regulation No.129﹐your child must meet the following requirements.

With the i-Size ISOFIX connections: Child height 40cm-85cm/ Child

weight 13kg

With vehicle belt: Child height 40cm-85cm/Child weight  13kg

Please read all the instructions in this manual before installing and us-

ing the product.

! IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ CARE-

FULLY.

Please keep the instruction manual in the storage compartment at the

bottom of the base or inside of the seat cover.

For warranty information﹐please visit our website at joiebaby.com

*i-Base 2 is sold separately.

3 4

WARNING WARNING

! Please check before you purchase this enhanced infant child re-

straint to make sure it can be installed properly in your vehicle.

! NO enhanced infant child restraint can guarantee full protection from

injury in an accident. However, proper use of this enhanced infant

child restraint will reduce the risk of serious injury or death to your

child.

! To use this enhanced infant child restraint with the ISOFIX connec-

tions according to the ECE R129/03 Regulation, your child must

meet the following requirements.

i-Gemm 3: Child height 40cm-85cm/ Child weight≤13kg (approxi-

mately 1.5 years old or under).

i-Snug 2: Child height 40cm-75cm/ Child weight≤13kg (approxi-

mately 1 year old or under).

! To use this infant carrier module with vehicle belt, your child must

meet the following requirements.

i-Gemm 3: Child height 40cm-85cm/ Child weight≤13kg (approxi-

mately 1.5 years old or under).

i-Snug 2: Child height 40cm-75cm/ Child weight≤13kg (approxi-

mately 1 year old or under).

! Any straps holding the enhanced child restraint to the vehicle should

be tight; any support-leg should be in contact with the vehicle floor;

any straps or impact shields restraining the child should be adjusted

to the child’s body, and that straps should not be twisted.

! DO NOT install this enhanced infant child restraint without following

the instructions in this manual or you may put your child at serious

risk of injury or death.

! NEVER leave your child unattended with this enhanced infant child

restraint.

! DO NOT make any modification to this enhanced infant child re-

straint or use it along with component parts from other manufactur-

ers.

! DO NOT use this enhanced infant child restraint if it has damaged or

missing parts.

! DO NOT have your child in large/oversized clothes because this may

prevent your child from being properly and securely fastened by the

shoulder harness straps and the crotch strap between the legs.

! DO NOT use this enhanced infant child restraint without the soft

goods.

! The soft goods should not be replaced with any besides the ones

recommended by the manufacturer. The soft goods constitute an

integral part of the enhanced infant child restraint performance.

! DO NOT put anything other than the recommended inner cushions in

this enhanced infant child restraint.

! Be sure that the enhanced infant child restraint is installed in such a

way that no part of it interferes with movable seats or in the opera-

tion of vehicle doors.

! DO NOT continue to use this enhanced infant child restraint after it

has suffered any type of crash, even a minor one. Replace immedi-

ately as there may be invisible, structural damage from the crash.

! Remove this infant carrier module and base from the vehicle seat

when it is not in regular use.

! Consult the distributor for issues concerning maintenance, repair

and part replacement.

! To avoid the risk of falling out, always secure the child using the

child harness when the child is placed in infant carrier module, even

when the enhanced infant child restraint is not in the vehicle.

! Before carrying the infant carrier module by hand, ensure that the

child is fastened with the child harness, and that the handle is cor-

rectly locked in a vertical position.

! To avoid serious injury or death, NEVER place infant carrier module

on elevated surface seat with child in it.

! The parts of this enhanced infant child restraint should not be lubri-

cated in any way.

! Always secure child in enhanced infant child restraint, even on short

trips, as this is when most accidents occur.

! Frequently check the ISOFIX guides for dirt and clean them if neces-

sary. Reliability can be effected by ingress of dirt, dust, food particles

etc.

5 6

WARNING

! DO NOT leave this enhanced infant child restraint or other items un-

belted or unsecured in your vehicle because an unsecured enhanced

infant child restraint can be thrown around and may injure occupants

in a sharp turn, sudden stop, or collision.

! DO NOT place a rear-facing enhanced infant child restraint on front

seat with activated front airbag. Death or serious injury may occur.

Please reference vehicle owner’s manual for more information.

! DO NOT place any objects in the load leg area in front of your base.

! DO NOT use any load bearing contact points other than those de-

scribed in the instructions and marked on the enhanced infant child

restraint.

! Please do not use this enhanced child restraint if the enhanced child

restraint has dropped from a significant height, hit the ground at a

considerable speed, or has visible signs of damage. We are not

responsible to replace if the car seat has been damaged under these

abnormal conditions. A new car seat will need to be purchased

when any of the aforementioned conditions occurs.

7 8

Materials Plastics, metal, fabrics

Patent No. Patents pending

Emergency

In case of emergency or accidents, it is most important to have your

child taken care of with first aid and medical treatment immediately.

Product Information

On i-Base 2 with the i-Size ISOFIX connections

1. This is an i-Size Enhanced Child Restraint System. It is approved

according to UN Regulation No.129, for use in, i-Size compatible

vehicle seating positions as indicated by vehicle manufacturers in

the vehicle users’ manual.

2. If in doubt, consult either the Enhanced Child Restraint System

manufacturer or the retailer.

On i-Base 2 with Vehicle Belt

1. This is Specific vehicle Belted Enhanced Child Restraint System.

2. If in doubt, consult either the Enhanced Child Restraint System

manufacturer or the retailer.

With vehicle belt

1. This is Universal Belted Enhanced Child Restraint System. It is

approved according to UN Regulation NO 129. for use primarily in

“Universal seating positions” as indicated by vehicle manufacturers

in the vehicle user’s manual.

2. If in doubt, consult either the Enhanced Child Restraint System

manufacturer or the retailer.

Choose Your Installation

Figure for

Installation

Child height 40cm-85cm/

Child weight≤13kg

(approximately 1.5 years

old or under)

Suitable for

Child height 40cm-85cm

Child weight≤13kg

Child age≤18 months

Child height 40cm-85cm/

Child weight ≤ 13kg

(approximately 1.5 years

old or under)

i-Gemm 3 is compatible with i-Base 2, i-Base lx 2, i-Base Advance and

i-Base Encore. For the use with i-Base lx 2, i-Base Advance and

i-Base Encore, please refer to the individual base's manual.

910

! This infant carrier module is suitable for vehicle seats with i-Size

ISOFIX anchor points with the base.

! DO NOT install this enhanced infant child restraint on vehicle seats

that face sideways or rearward with respect to the moving direction

of the vehicle.

! DO NOT place rear-facing enhanced infant child restraint on front

seat with air bag , because death or serious injury may occur. Please

reference vehicle owner’s manual for more information.

! It is recommended to install this enhanced infant child restraint on

the rear vehicle seat.

! DO NOT install this enhanced infant child restraint on vehicle seats

movable during installation.

Installation Concerns

2

1

4

1

5 7

3

6

2 4

5 7

3

6

A

I

R

B

A

G

Aeroplane lnstallation

Note that safety of the child for not complying with the installation and

instruction manual is not guaranteed.

! Note that the installation of the infant carrier on an aircraft seat

differs from the installation on a car seat.

! Note that 2-Point “Lap Belt” attachment is only permitted in aircraft.

! Note that the infant carrier must remain belted on the aircraft seat

even when unoccupied.

! Note that the infant carrier is only for use on a passenger seat

authorized by the airline.

11 12

Handle Adjustment

3

2

1

! Warnings not to use the infant carrier in the area of airbag deploy-

ment.

! Note that Rearward facing infant carrier should only be installed on

forward facing passenger seats.

How to install the baby seat using the aircraft seat’s safety belt:

1. Place the infant carrier opposite to the flight direction onto the

passenger seat.

2. Ensure that the carry handle is in the topmost position.

3. Place the safety belt into both light green belt guides.

4. Close the safety belt (refer to the safety instructions by the airline).

5. Tighten the safety belt by pulling the belt end.

! The buckle of the safety belt must under no circumstances lie within

the light green belt guides.

Removal:

Open the safety belt of the passenger seat (refer to the safety instruc-

tions by the airline).

Now you can take the baby seat from the passenger seat.

1

2

The handle of the infant carrier module can be adjusted to 3 positions.

! Position for car, hand or stroller transportation.

To adjust the handle, squeeze the handle buttons on both sides to

release it, and then rotate the handle until it clicks into any of the 3

positions.

1. Unfold the load leg from storage compartment. 1

2. Fit the ISOFIX guides with the ISOFIX anchor points. 2 The ISOFIX

guides can protect the surface of the vehicle seat from being torn.

They can also guide the ISOFIX connectors.

3. Rotate the ISOFIX connectors 180 degrees until they are pointing in

the direction of the ISOFIX guides. 3

4. Line up the ISOFIX connectors with the ISOFIX guides, and then

click both ISOFIX connectors into the ISOFIX anchor points. 4

! Make sure that both ISOFIX connectors are securely attached to

their ISOFIX anchor points. There should be two audible clicks and

the colors of the indicators on the both ISOFIX connectors should be

completely green. 4 -1

! Check to make sure the base is securely installed by pulling on the

both ISOFIX connectors.

5. After placing the base on the vehicle seat, extend the load leg to

floor 5, When the load leg indicator shows green means it is

installed correctly, red means it is installed incorrectly. 5 -3

! The load leg has 24 positions. When the load leg indicator shows red

this means the load leg is in the wrong position.

! Make sure the load leg is in full contact with the vehicle floor pan.

! Squeeze the load leg releasing button, then shorten the load leg

upwards.

Installation with base

ISOFIX Installation see images 1 - 11

13 14

The completely assembled base is shown as 6

! The ISOFIX connectors must be attached and locked onto the

ISOFIX anchor points. 6 -1

! The load leg must be installed correctly with green indicator. 6 -2

6. Push the infant carrier module down into the base 7, if the

enhanced infant child restraint is secure, the enhanced infant child

restraint indicator shows green. 8

! Pull up on the infant carrier module to be sure it is securely latched

into the base.

7. To release the infant carrier, pull the infant carrier up 9 -2 while

squeezing the infant carrier release button. 9 -1

8. To remove the base, press the secondary lock button 10 -1 first and

then the button 10 -2 on the ISOFIX connectors before removing the

base from the vehicle seat. 10

9. Press the ISOFIX releasing button to fold the ISOFIX. 11

Vehicle Belts Installation see images 12 - 16

1. Unfold the load leg from storage compartment. 1

2. After placing the base on the vehicle seat, extend the load leg to

floor 5, When the load leg indicator shows green means it is

installed correctly, red means it is installed incorrectly. 5 -3

! The load leg has 24 positions. When the load leg indicator shows

red this means the load leg is in the wrong position.

! Make sure the load leg is in full contact with the vehicle floor pan.

! Squeeze the load leg releasing button, then shorten the load leg

upwards.

3. Open the lock-off and route the vehicle safety belt through the belt

path 12 -1, and lock it into the buckle. 12 -2

4. Tighten the vehicle safety belt as much as possible while pushing

down on the base, and check it is not loose or twisted, then close

the lock-off. 12 -3

! The infant child restraint can not be used if the vehicle safety belt

with female buckle is too long to tie the base. 12 -4

! Check that the safety belt does not move by pulling and pushing

hard on base. If belt loosens or lengthens, repeat procedure.

5. The installed base is shown as 13 .

! Please ensure that there is no gap between the seat and the bottom

of the base.

! The safety belt must go under the lock-off, not over the lock-off. 13

-1

! The safety belt must be locked into the buckle. 13 -2

! The load leg must be installed correctly with green indicator. 13 -3

6. Push the infant carrier module down into the base. 14

7. If the enhanced child restraint is secure, the enhanced child restraint

indicator shows green. 15

! Pull up on the infant carrier module to be sure it is securely latched

into the base.

8. To release the infant carrier module, pull the infant carrier up 16 -2

while squeezing the infant carrier release button. 16 -1

15 16

Height Adjustment

for Head Support and Shoulder Harnesses

see images 17 - 20

Check that Shoulder Harness Straps are set at the proper height.

Please choose the proper pair of shoulder harness slots according to

the child’s height.

! The bottom of headrest must be level with the highest point of

child’s shoulder, it is shown as 17 , but not above the shoulder line.

18

! If the Shoulder Harness Straps are not at proper height, the child

might be ejected from the enhanced infant child restraint if there is a

crash.

Squeeze the head support adjustment lever 19 , meanwhile pull up or

push down the head support until it snaps into one of the 7 positions.

The head support positions are shown as 20

1. Infant insert is for children's protection. Children whose height

is under 60cm are suitable to use the infant insert.

2. Before using the insert, please add the foam wedge. 21

3. After the child is placed in the seat, check if the shoulder

harnesses are set to the correct height.

Note

Remove the body portion of the infant insert

when the infant’s shoulders no longer ﬁt

comfortably.

Securing Child

in the enhanced Infant Child Restraint

see images 21 - 26

1. While pressing the harness adjustment button, pull completely the

two shoulder harnesses of the enhanced infant child restraint. 22

2. Unlock the buckle of the harnesses by pressing the red button. 23

3. Place child into the infant carrier module and lock the buckle. 24 & 25

4. Tighten the shoulder harnesses by pulling adjustment webbing. 26

To re-assemble the soft goods, reverse the aforementioned steps.

Detaching Canopy and Seat Pad

see images 27 - 32

17 18

! DO NOT install this infant carrier module on vehicle seats with Lap

Belts. 33

! This infant carrier module is suitable for vehicle seats with a 3-point

Retractor Safety Belt only. 34

1. Place the infant carrier module onto the vehicle seat where you wish

to put it. Pull the vehicle safety belt out and lock it into the vehicle

buckle, sliding the vehicle lap belt into the side guides of the infant

carrier module. 35

! The infant carrier module can not be used if the vehicle safety belt

buckle (female buckle end) is too long to anchor the infant carrier

module securely. 35 -2

2. Slide diagonal belt into the rear guide. 36

3. Pull the vehicle shoulder belt to fasten the infant carrier module

tightly and securely. 37

4. Level line on infant carrier module must be level to the ground when

the infant carrier module is installed. 38

! Tension the vehicle safety belt as much as possible, checking that it

is not loose or twisted.

! After installing the infant carrier module, always check that the

vehicle belts are routed correctly and securely fastened into the

vehicle buckle. 39

5. The hood can be opened completely to protect your child from the

sun uttermostly, just unzip the hook, and then pull the hood toward

front. 40

Installation without base

see images 33 - 40 see images 41 - 50

Your enhanced infant child restraint is designed to attach to certain

Joie stroller models featuring a special tray, armbar or calf support.

! Please make sure your stroller can fit the infant child restraint before

purchasing it.

! Never allow more than one baby in the travel system at one time.

! Please brake your stroller before assembling the enhanced infant

child restraint.

! Check that the parts used to fix the enhanced infant child restraint

are securely fastened on the stroller.

! Recline the stroller seat back to the lowest position.

Use with Joie Strollers

To assemble the enhanced infant child restraint on Joie strollers,

please follow these steps:

1. Place enhanced child restraint into stroller so notches in rockers fit

over edge of armbar, tray or calf support. The enhanced child

restraint will then automatically click into place. 41 & 42 & 43 & 44

! If armbar has fabric cover, please detach the Velcro on armbar cover

first. 43 -1

! For the stroller with a special calf support, please adjust the calf

support to the vertical position, detach the Velcro, and then lift the

fabric cover. 44 -1

2. Use the straps on both sides of stroller to fix the enhanced child

restraint. 45 & 46 & 47

! Try pulling the enhanced child restraint upwards to check that it is

fitted correctly.

Use with Strollers

19 20

To remove the enhanced child restraint, release the straps from the

enhanced child restraint, pull up the stroller release handle to release

the enhanced child restraint from tray, armbar or calf support, and then

lift enhanced child restraint out of stroller. Please refer to 48 & 49 & 50 .

! After removing the foam wedge of insert, please store it somewhere

that the child cannot access it.

! Please wash the seat cover and inner padding with cold water under

30°C.

! Do not iron the soft goods.

! Do not bleach or dry clean the soft goods.

! Do not use undiluted detergents, gasoline or other organic solvent to

wash the infant carrier module or base. It may cause damage to the

enhanced infant child restraint.

! Do not twist the seat cover and inner padding in an attempt to dry. It

may leave the seat cover and inner padding with wrinkles.

! Please hang dry the seat cover and inner padding in the shade.

! Please remove the enhanced infant child restraint and base from the

vehicle seat if not in use for a long period of time. Put the enhanced

infant child restraint in a cool, dry place and somewhere your child

cannot access it.

Care and Maintenance

21

Certifique-se de que não existem peças em falta. Se faltar alguma

peça, contacte o revendedor.

1 Apoio de cabeça

2 Capa de tecido acolchoado

3 Botão de desbloqueio da

fixação ao carrinho A

4 Guia lateral

5 Redutor para bebé

6 Tira de ajuste

7 Botão de ajuste das alças

8 Alça

9 Encaixe da cobertura

10 Cobertura

11 Conectores das alças

12 Fivela

13 Pega

14 Botão da pega

Lista de componentes

15 Guia traseiro

16 Botão de desbloqueio da

fixação ao carrinho B

17 Conector ISOFIX

18 Indicador da estrutura

19 Guias ISOFIX

20 Perna de carga

21 Botão A de ajuste da perna

de carga

22 Indicador da perna de carga

23 Botão B de ajuste da perna

de carga

24 Botão de desbloqueio do

transportador

25 Bloqueio

PT Bem-vindo à Joie™

Adquiriu um dispositivo avançado de retenção para crianças de alta

qualidade totalmente certificado. Este produto pode ser utilizado por

crianças com altura e peso até 85 cm e 13 kg.

Leia atentamente este manual de instruções e siga os passos de

instalação porque esta é a ÚNICA forma de proteger a criança de

lesões graves ou morte em caso de acidente e garantir uma utilização

confortável deste produto para a criança.

Guarde este manual de instruções para referência futura.

Confirme

Para utilizar este dispositivo avançado de retenção para crianças Joie

de acordo com a Regulamentação UN N.º 129﹐ a criança deve cumprir

os seguintes requisitos.

Com as ligações ISOFIX i-Size: Altura da criança 40 cm-85cm/ Peso da

criança  13kg

Com cinto de segurança do veículo: Altura da criança 40 - 85 cm/

Peso da criança  13 kg

Leia todas as instruções deste manual antes de utilizar o produto.

! IMPORTANTE: GUARDAR PARA CONSULTA FUTURA. LEIA

ATENTAMENTE.

Guarde o manual de instruções no compartimento de armazenamento

no fundo da base ou no interior da capa de tecido.

Para informações sobre a garantia﹐ visite o nosso website em

joiebaby.com

*i-Base 2 vendido separadamente.

25

17

18

20 22

23

24

2

3

4

5

6

7

8

9

10

11

12

19

13

14

15

16

21

1

23 24

AVISO

! Verifique antes de comprar este sistema de retenção infantil para se

certificar de que pode ser instalado corretamente em seu veículo.

! NENHUMA cadeirinha infantil pode garantir proteção total contra

lesões em um acidente. No entanto,o bom uso deste sistema de re-

tenção infantil vai reduzir o risco de ferimentos graves ou morte para

o seu filho.

! Para usar esta cadeira infantil com o conexões ISOFIX de acordo

com o Regulamento ECE R129/03, o seu filho deverá atender os

seguintes requisitos.

i-Gemm 3:

Altura da criança de 40 cm-85 cm/peso da criança ≤13

kg; (cerca de 1,5 anos de idade ou menos).

i-Snug 2:

Altura da criança de 40 cm-75 cm/peso da criança ≤13 kg;

(cerca de 1 ano de idade ou menos).

! Para usar este módulo de carregador infantil com cinto do veículo, a

criança deve atender os seguintes requisitos.

i-Gemm 3:

Altura da criança de 40 cm-85 cm/peso da criança ≤13

kg; (cerca de 1,5 anos de idade ou menos).

i-Snug 2:

Altura da criança de 40 cm-75 cm/peso da criança ≤13 kg;

(cerca de 1 ano de idade ou menos).

! Quaisquer tiras da cadeirinha devem estar apertadas e não torcidas.

! NÃO instale ou utilize este sistema de retenção para crianças sem

seguir as instruções deste manual, ou você pode colocar o seu filho

em grave risco de lesão ou morte.

! Nunca deixe a criança sem vigilância com este sistema de retenção

infantil.

! NÃO faça qualquer modificação nesta cadeirinha ou use-a junta-

mente com componentes de outros fabricantes.

! NÃO utilize este assento infantil se houver peças danificadas ou

faltando.

! NÃO use roupas grandes/largas em seu filho visto que isto pode pre-

venir que seu filho esteja apropriada e seguramente preso pelo cinto

de ombro e pela faixa entre as pernas.

! NÃO deixe este sistema de retenção para crianças ou outros itens

soltos em seu veículo porque uma cadeirinha solta pode ser jogada

ao redor e pode ferir os ocupantes em um curva fechada, parada

súbita ou colisão.

AVISO

! NÃO coloque um sistema de retenção infantil voltado para trás no

banco da frente com air bag. Morte ou lesões graves podem ocorrer.

Consulte manual do proprietário do veículo para obter mais informa-

ções.

! NUNCA use uma cadeirinha de segunda-mão ou um sistema de re-

tenção para crianças cuja história você não sabe porque elas podem

ter danos estruturais que comprometem a segurança do seu filho.

! NUNCA use cordas ou quaisquer outros substitutos para prender a

retenção infantil em veículos, ou para assegurar a criança na reten-

ção infantil.

! NÃO utilize esta cadeirinha sem as partes macias.

! As partes macias do assento não devem ser substituídas por nenhu-

ma outra além das recomendadas pelo fabricante. As partes macias

constituem parte integrante do desempenho da retenção infantil.

! NÃO coloque nada além das almofadas internas recomendadas

neste assento infantil.

! Certifique-se de que o sistema de retenção infantil é instalado de

tal forma que nenhuma parte interfira com assentos móveis ou na

operação de portas do veículo.

! NÃO continue a usar este sistema de retenção para crianças depois

que ele qualquer acidente, mesmo um pequeno. Substitua imediata-

mente, pois pode ter danos estruturais invisíveis do acidente.

! Remova esta assento infantil da base do assento do veículo quando

não em uso regular.

! Consulte o distribuidor para assuntos relacionados a manutenção,

reparos e substituição de peças.

! Para evitar o risco de cair, sempre proteger a criança usando o cinto

de criança, quando a criança é colocada na retenção infantil, mesmo

quando o sistema de retenção infantil não está no veículo.

! Antes de levar a retenção infantil com a mão, certifique-se de que

a criança está presa com o cinto de criança, e que a alça fique cor-

retamente travada em uma posição vertical.

25 26

AVISO

! Para evitar ferimentos graves ou morte, NUNCA coloque a retenção

infantil no assento e, superfície elevada com a criança dentro.

! As partes deste sistema de retenção infantil não devem ser lubrifica-

das de forma alguma.

! Sempre prenda a criança na retenção infantil, mesmo em viagens

curtas, pois é quando ocorre a maioria dos acidentes.

! NÃO utilize este assento infantil por mais de 5 anos da data da

aquisição, visto que as peças se degradam com o passar do tempo,

ou da exposição a luz do sol, e podem não desempenhar adequada-

mente em uma colisão.

! Mantenha este sistema de retenção infantil longe da luz solar,pois

pode ficar muito quente para a pele da criança. Sempre toque a

retenção infantil antes de colocar criança na mesma.

! Verifique com frequência as guias ISOFIX para sujeira e limpe-as,

se necessário. A confiabilidade pode ser efetuada pela entrada de

sujeira, poeira, partículas de alimento etc.

!

NÃO coloque objetos na área de carga da perna da frente a sua base.

! Instalação correta só é permitida pelo uso dos conectores ISOFIX.

!

Depois de seu filho ser colocado nessa retenção infantil, o cinto

de criança deve ser utilizado corretamente, e garantir que qualquer

cinto de colo é usado para baixo, de modo que a pelve fique firme-

mente presa.

! NÃO utilize qualquer pontos de contato de sustentação de carga

além daqueles descritos nas instruções e marcados no cinto infantil.

! Por favor, não use este assento de carro se o assento de carro

caiu de uma altura significativa, atingiu o chão a uma velocidade

considerável, ou tem sinais visíveis de danos. Nós não somos

responsáveis para substituir se o assento de carro foi danificado sob

estas condições anormais. Um assento de carro novo precisará ser

comprado quando qualquer uma das condições acima mencionadas

ocorre.

27 28

Materiais Plástico, metal, tecido

N.º de patente Patente pendente

Emergência

Em caso de emergência ou acidente, é muito importante que a criança

receba imediatamente primeiros socorros e tratamento médico.

Informações sobre o produto

Na i-Base 2 com as ligações ISOFIX i-Size

1. Este é um sistema avançado i-Size de retenção para crianças. Está

aprovado ao abrigo da Regulamentação UN N.º 129 para utilização

em veículos com lugares sentados compatíveis com "i-Size", como

indicado no manual do utilizador do fabricante do veículo.

2. Em caso de dúvida, consulte o fabricante ou o revendedor do

sistema avançado de retenção para crianças.

Na i-Base 2 com cinto de segurança do veículo

1. Este é um sistema avançado de retenção para crianças com cinto

de segurança para veículo específico.

2. Em caso de dúvida, consulte o fabricante ou o revendedor do

sistema avançado de retenção para crianças.

Com cinto de segurança do veículo

1. Este é um sistema avançado universal de retenção para crianças.

Está aprovado ao abrigo do Regulamento UN N.º 129 para

utilização em veículos com “lugares sentados universais”, como

indicado no manual do utilizador do fabricante do veículo.

2. Em caso de dúvida, consulte o fabricante ou o revendedor do

sistema avançado de retenção para crianças.

Escolha a sua instalação

Figure for

Installation

Child height 40cm-85cm/

Child weight≤13kg

(approximately 1.5 years

old or under)

Suitable for

Child height 40cm-85cm

Child weight≤13kg

Child age≤18 months

Child height 40cm-85cm/

Child weight ≤ 13kg

(approximately 1.5 years

old or under)

i-Gemm 3 é compatível com i-Base 2, i-Base lx 2, i-Base Advance e

i-Base Encore. Para utilizar com i-Base lx 2, i-Base Advance e i-Base

Encore, consulte o respetivo manual da base.

Figura para instalação Adequado para

Altura da criança 40 - 85 cm/

Peso da criança ≤ 13 kg

(idade aproximadamente igual

ou inferior a 1,5 anos)

Altura da criança 40 cm-85cm/

Peso da criança ≤ 13kg

(idade aproximadamente igual

ou inferior a 1,5 anos)

Altura da criança 40cm-85cm/

Peso da criança ≤ 13kg

Idade da criança ≤ 18 meses

La pagina sta caricando ...

Jole i-Gemm™ 3 Manuale utente

Jole i-Gemm™ 3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti