Lexmark 4036-308 Manuale utente

Lexmark

™

4600 MFP option

4036-307/308

• Table of contents

• Start diagnostics

• Safety and notices

•Trademarks

• Index

Lexmark and Lexmark with diamond design are

trademarks of Lexmark International, Inc., registered

in the United States and/or other countries.

Edition: May 11, 2006

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or

i

mplied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the

information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the

programs described may be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road,

Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTrainin[email protected]om. Lexmark may use or distribute any

o

f the information you supply in any way it believes appropriate without incurring any obligation to you.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these

a

vailable in all countries in which it operates. Any reference to a product, program, or service is not intended to state or

imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that

d

oes not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in

conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the

user’s responsibility.

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the

United States and/or other countries.

Optra Forms is a trademark of Lexmark International, Inc.

PCL® is a registered trademark of the Hewlett-Packard Company.

All other trademarks are the property of their respective owners.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software

and documentation developed exclusively at private expense.

12G9664

4036-307/308

Table of contents iii

4036-307/308

Table of contents

Table of contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Scanner specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Tools required for service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Diagnostic information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Power-On Self Test (POST) sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Symptom tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Reading is not performed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Scan module does not move to home position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Error codes and messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Service error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Sub error codes for 8xx and 2xx error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

User attendance messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Service checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

The power does not come on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Frequent paper jam, double feed, or skew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Image does not appear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Image unclear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Large jitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Reading position deviation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Strange sound generated (ADF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Strange sound generated (flatbed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

842.00 Scanner failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

843.00 Scanner failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

844.00 Front scan module output level error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

844.01 Rear scan module output level error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

844.02 Front scan module lamp level too low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

845.00 Front scan module cable failure or SCC card failure CCD channel failure . . . . . . . . . . 2-16

845.01 Rear scan module cable failure or SCC card failure CCD channel failure . . . . . . . . . . . 2-16

845.02 Cable/SCC failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

845.03 Cable/SCC failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

846.xx Front calibration strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

848.00 Modem/config ID mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

848.01 Modem/config ID mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

849.00 HD/config ID mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Control panel and menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Control panel and buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

iv Service Manual

4036-307/308

LCD touch-screen buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22

Sample screen one . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22

Information on LCD touch-screen buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23

Sample screen two . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24

Information on LCD touch-screen buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25

Other LCD touch-screen buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27

Menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27

Diagnostic aids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Accessing service menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Diagnostics Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Entering Diagnostics Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Available tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

EVENT LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Display Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Print Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Clear Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

SCANNER TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

ASIC Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Feed Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Scanner Manual Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Sensor Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

Configuration menu (CONFIG MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

Entering Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

Available menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

Format Fax Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

ADF Edge Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

FB Edge Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

Automatic Scanner Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8

EVENT LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

Jobs On Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

Disk Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

Wipe Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10

Key Repeat Initial Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Key Repeat Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Wiper Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Exit Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Paper feed jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12

Identifying jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12

Access doors and trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13

Understanding jam messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13

Clearing jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14

Clearing ADF Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14

290, 291, 292, and 294 Scanner Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14

Repair information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Handling ESD-sensitive parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

Service guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

Removal procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Removals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Parts replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Alignment screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Flatbed CCD optical unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

ADF optical unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

Table of contents v

4036-307/308

Document input tray removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

ADF lower cover removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

ADF outer cover removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

ADF upper cover removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

ADF lamp removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

ADF motor/distribution board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

ADF optical unit removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

ADF sensor board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

ADF upper cover sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Document cover assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Paper feed assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Paper feed motor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Paper feed roller removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Paper length sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

Paper present/paper feed 1 sensors removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Paper stop removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Pick pad removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Scanner cushion removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Control panel keypad board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

Control panel assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

LCD HV inverter board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

Control panel display assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

Flatbed cover with glass removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

Carriage transport belt removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

Flatbed CCD optical unit removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

Flatbed lamp assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

Flatbed lamp inverter board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34

Bottom plate removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35

Hard disk drive, A1 board, scanner control board, power supply board, and modem board removals

4-36

Scanner control board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37

Hard disk drive assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38

Modem board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

Power supply board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

A1 board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40

Control cooling fan removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

Document cover sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42

Connector locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Scanner mechanism overview and locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

External view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Internal Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Scanner control board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Modem board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Power supply board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

A1 board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Preventive maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Safety inspection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Lubrication specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Scheduled maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Parts catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

How to use this parts catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Assembly 1: ADF assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Assembly 2: Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

vi Service Manual

4036-307/308

Assembly 3: Lower scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Assembly 4: Electronic boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Assembly 5: Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I-1

Part number index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I-3

Safety information vii

4036-307/308

Safety information

• The safety of this product is based on testing and approvals of the original design and specific

components. The manufacturer is not responsible for safety in the event of use of unauthorized

replacement parts.

• The maintenance information for this product has been prepared for use by a professional service person

and is not intended to be used by others.

• There may be an increased risk of electric shock and personal injury during disassembly and servicing of

this product. Professional service personnel should understand this and take necessary precautions.

• CAUTION: When you see this symbol, there is a danger from hazardous voltage in the area of the

product where you are working. Unplug the product before you begin, or use caution if the product

must receive power in order to perform the task.

Consignes de sécurité

• La sécurité de ce produit repose sur des tests et des

agréations portant sur sa conception d'origine et sur des composants particuliers. Le fabricant n'assume

aucune responsabilité concernant la sécurité en cas d'utilisation de pièces de rechange non agréées.

• Les consignes d'entretien et de réparation de ce produit s'adressent uniquement à un personnel de

maintenance qualifié.

• Le démontage et l'entretien de ce produit pouvant présenter certains risques électriques, le personnel

d'entretien qualifié devra prendre toutes les précautions nécessaires.

• ATTENTION : Ce symbole indique la présence d'une tension dangereuse dans la partie du

produit sur laquelle vous travaillez. Débranchez le produit avant de commencer ou faites preuve

de vigilance si l'exécution de la tâche exige que le produit reste sous tension.

Norme di sicurezza

• La sicurezza del prodotto si basa sui test e sull'approvazione del progetto originale e dei componenti

specifici. Il produttore non è responsabile per la sicurezza in caso di sostituzione non autorizzata delle

parti.

• Le informazioni riguardanti la manutenzione di questo prodotto sono indirizzate soltanto al personale di

assistenza autorizzato.

• Durante lo smontaggio e la manutenzione di questo prodotto,

il rischio di subire scosse elettriche e danni alla persona è più elevato. Il personale di assistenza

autorizzato deve, quindi, adottare le precauzioni necessarie.

• ATTENZIONE: Questo simbolo indica la presenza di tensione pericolosa nell'area del prodotto.

Scollegare il prodotto prima di iniziare o usare cautela se il prodotto deve essere alimentato per

eseguire l'intervento.

viii Service Manual

4036-307/308

Sicherheitshinweise

• Die Sicherheit dieses Produkts basiert auf Tests und Zulassungen des ursprünglichen Modells und

bestimmter Bauteile. Bei Verwendung nicht genehmigter Ersatzteile wird vom Hersteller keine

Verantwortung oder Haftung für die Sicherheit übernommen.

• Die Wartungsinformationen für dieses Produkt sind ausschließlich für die Verwendung durch einen

Wartungsfachmann bestimmt.

• Während des Auseinandernehmens und der Wartung des Geräts besteht ein zusätzliches Risiko eines

elektrischen Schlags und körperlicher Verletzung. Das zuständige Fachpersonal sollte entsprechende

Vorsichtsmaßnahmen treffen.

• ACHTUNG: Dieses Symbol weist auf eine gefährliche elektrische Spannung hin, die in diesem

Bereich des Produkts auftreten kann. Ziehen Sie vor den Arbeiten am Gerät den Netzstecker des

Geräts, bzw. arbeiten Sie mit großer Vorsicht, wenn das Produkt für die Ausführung der Arbeiten

an den Strom angeschlossen sein muß.

Pautas de Seguridad

• La seguridad de este producto se basa en pruebas y aprobaciones del diseño original y componentes

específicos. El fabricante no es responsable de la seguridad en caso de uso de piezas de repuesto no

autorizadas.

• La información sobre el mantenimiento de este producto está dirigida exclusivamente al personal

cualificado de mantenimiento.

• Existe mayor riesgo de descarga eléctrica y de daños personales durante el desmontaje y la reparación de

la máquina. El personal cualificado debe ser consciente de este peligro y tomar las precauciones

necesarias.

• PRECAUCIÓN: este símbolo indica que el voltaje de la parte del equipo con la que está

trabajando es peligroso. Antes de empezar, desenchufe el equipo o tenga cuidado si, para

trabajar con él, debe conectarlo.

Informações de Segurança

• A segurança deste produto baseia-se em testes e aprovações do modelo original e de componentes

específicos. O fabricante não é responsável pela segunrança, no caso de uso de peças de substituição

não autorizadas.

• As informações de segurança relativas a este produto destinam-se a profissionais destes serviços e não

devem ser utilizadas por outras pessoas.

• Risco de choques eléctricos e ferimentos graves durante a desmontagem e manutenção deste produto.

Os profissionais destes serviços devem estar avisados deste facto e tomar os cuidados necessários.

• CUIDADO: Quando vir este símbolo, existe a possível presença de uma potencial tensão

perigosa na zona do produto em que está a trabalhar. Antes de começar, desligue o produto da

tomada eléctrica ou seja cuidadoso caso o produto tenha de estar ligado à corrente eléctrica para

realizar a tarefa necessária.

Safety information ix

4036-307/308

Informació de Seguretat

• La seguretat d'aquest producte es basa en l'avaluació i aprovació del disseny original i els components

específics.

El fabricant no es fa responsable de les qüestions de

seguretat si s'utilitzen peces de recanvi no autoritzades.

• La informació pel manteniment d’aquest producte està orientada exclusivament a professionals i no està

destinada

a ningú que no ho sigui.

• El risc de xoc elèctric i de danys personals pot augmentar durant el procés de desmuntatge i de servei

d’aquest producte. El personal professional ha d’estar-ne assabentat i prendre

les mesures convenients.

• PRECAUCIÓ: aquest símbol indica que el voltatge de la part de l'equip amb la qual esteu

treballant és perillós. Abans de començar, desendolleu l'equip o extremeu les precaucions si, per

treballar amb l'equip, l'heu de connectar.

x Service Manual

4036-307/308

Preface

This manual contains maintenance procedures for service personnel. It is divided into the following chapters:

1. General information contains a general description of the scanner and the maintenance approach used

to repair it. Special tools and test equipment are, as well as general environmental and safety instructions.

2. Diagnostic information contains an error indicator table, symptom tables, and service checks used to

isolate failing field replaceable units (FRUs).

3. Diagnostic aids contains tests and checks used to locate or repeat symptoms of printer problems.

4. Repair information provides instructions for making printer adjustments and removing and installing

FRUs.

5. Connector locations uses illustrations to identify the connector locations and test points on the printer.

6. Preventive maintenance contains the lubrication specifications and recommendations to prevent

problems.

7. Parts catalog contains illustrations and part numbers for individual FRUs.

Appendix A contains service tips and information.

Appendix B contains representative print samples.

Conventions

Note: A note provides additional information.

Warning: A warning identifies something that might damage the product hardware or software.

The are several types of caution statements:

CAUTION

A caution identifies something that might cause a servicer harm.

CAUTION

This type of caution indicates there is a danger from hazardous voltage in the area of the

product where you are working. Unplug the product before you begin, or use caution if the

product must receive power in order to perform the task.

CAUTION

This type of caution indicates a hot surface.

CAUTION

This type of caution indicates a tipping hazard.

General information 1-1

4036-307/308

1. General information

Overview

The Lexmark™ 4600 MFP option is a multifunction solution that offers integrated print, copy, fax, and color

network-scanning capabilities for increased small workgroup productivity. The option is easy to use and

provides low-cost access to key office functions, including fax from workstation, network color copying,

scanning, and electronic document routing.

Give your document to the option, and in a few steps, it scans to the network and delivers it wherever, to

whomever you want. With this scanner, inefficient trips to the mailroom, copier, fax machine and to your

workstation are a thing of the past.

This manual is for maintenance engineers. It describes the maintenance areas, installation, disassembly, and

the main troubleshooting guides.

Take your time to read this manual thoroughly to obtain comprehensive knowledge about the scanner before

servicing the unit.

Features

Ease of use

The control panel on the front of the scanner looks like a panel on a copier with standard phone keys added. The

operating steps follow the same procedure as that of a copier or fax machine.

Digital copier and full-function fax machine

When the option is connected to a Lexmark printer, it performs convenient digital copying. When connected to a

telephone line, the scanner performs a full fax function—to send and to receive faxes.

Network scanning

The scanner uses two color charge-coupled devices (CCD) when scanning. Through a network port at the rear

of the printer, the product is able to do network scanning.

Duplex scanning through the auto document feeder (ADF)

To increase workgroup productivity, the scanner uses the advance duplex scanning capability. The scan speed

limit is 20 ppm at 300 dpi resolution. The auto document feeder can hold up to 50 pages at one time.

1-2 Service Manual

4036-307/308

Scanner specifications

The scanner is designed to meet the following product specifications:

Scanner

Scanner Type Flatbed Scanner with ADF built in

Optical Resolution Flatbed: 600x300 dpi

ADF: 300x300 dpi

Scan Speed 17 ppm at 600 dpi color for single page scanning

40 ppm at 600 dpi line-art, duplex for ADF

Scan Method Color Charge-Coupled Device (CCD)

Light Source Cold Cathode Fluorescent Lamp (CCFL)

Scan Area Max. 8.5 x 14.0 inch (legal size) for ADF

Display 640x480 color VGA touch screen

Image Types 42-bit color (internal)

14-bit gray (internal)

1-bit line-art, Dither, Error Diffusion

Scan Accuracy Flatbed ADF

• Leading Edge <-1 ~ +2 mm <2.5 ~ +2.5 mm

• Side Edge <-1 ~ +2 mm <2.5 ~ +2.5 mm

• Skew <1 mm <2 mm

• Magnification Rate Tolerance

(width and length)

-1.5% ~ +1.5% -1.5% ~ +1.5%

Physical Dimension

• Width: 570 mm

• Depth 430 mm

• Height: 315 mm

• Weight 14 kg

Environment: Temperature Humidity

• Operating 15.6°C to 32.2°C (60°F to 90°F) 8% to 80% RH (relative

humidity)

• Storage -40°C to 65°C (-40°F to 149°F) 8% to 90% RH (Relative

Humidity)

Acoustic noise Operating: 58 dB or less

Electrostatic discharge EC 1000-4-2 ESD Standard

Safety regulation UL, CSA, TUV/GS, SEMKO

EMC regulation FCC Part 15 Subchapter J Class A

CE Marking, C-Tick

ADF

General information 1-3

4036-307/308

Tools required for service

Flat-blade screwdriver

#1 Phillips screwdriver, magnetic

#2 Phillips screwdriver, magnetic

#2 Phillips screwdriver, magnetic short-blade

Needlenose pliers

Diagonal side cutters

Spring hook

Feeler gauges

Analog or digital multimeter

Acronyms

General specifications:

• Optical Resolution 600x300 dpi

• Document Capacity 50 sheets

Document:

• Document size Max. 8.5 x 14 inch (W x L) Min. 4.5 x 5.5 inch (W x L)

• Thickness 0.05~0.15 mm

ADF Automatic Document Feeder

CCD Charge-Couple Device

CCFL Cold Cathode Fluorescent Lamp

CDB Command Descriptor Blocks

CRU Customer Replaceable Unit

ESD Electrostatic Discharge

FRU Field Replaceable Unit

HV High Voltage

LCM Liquid Crystal Module

LED Light-Emitting Diode

LV Low Voltage

MFD Multi Function Device

PCBA Printed Circuit Board Assembly

V ac Volts alternating current

V dc Volts direct current

1-4 Service Manual

4036-307/308

Diagnostic information 2-1

4036-307/308

2. Diagnostic information

Start

This chapter describes two methods to solve the operational problems. The first relies on the scanner internal

diagnostics to report error codes. The second uses troubleshooting techniques to isolate the problem. In many

cases, the internal error codes will help you to locate the source of the problem quickly. If no error codes are

reported, or if the error codes do not locate the source of the problem, refer to the Symptom Tables.

• If you have an error message or user message, check the following:

– “Error codes and messages” on page 2-3

– “User attendance messages” on page 2-6

• Does the POR stop? Check the “Power-On Self Test (POST) sequence” on page 2-2.

• Do you have a symptom, rather than an error message?

– “Symptom tables” on page 2-2

– “Scan module does not move to home position” on page 2-2

– “Reading is not performed” on page 2-2

– “Image does not appear” on page 2-2

– “Large jitter” on page 2-2

– “Reading position deviation” on page 2-2

– “Image unclear” on page 2-2

– “Strange sound generated (flatbed)” on page 2-2

– “Frequent paper jam, double feed, or skew” on page 2-2

– “Strange sound generated (ADF)” on page 2-2

• Additional information can be found at the following locations:

– “Control panel and buttons” on page 2-18

– “Menus” on page 2-27

– “Service checks” on page 2-13

Note: There may be printer error messages that are not contained in this service manual. Call your next level of

support for assistance.

CAUTION

Unplug all power from the electrical outlet before you connect or disconnect any cable or

electronic board or assembly for personal safety and to prevent damage to the scanner.

Disconnect any connections between the scanner and the printer.

2-2 Service Manual

4036-307/308

Power-On Self Test (POST) sequence

When you turn the printer on, it performs a Power-On Self Test. Check for correct POST functioning by

observing the following:

1. The printer LED (green light) turns on.

2. The operator panel turns on.

3. The operator panel displays counting the memory.

4. The operator panel displays a progression bar with the Lexmark splash logo.

5. You can hear the scanner doing a scanner calibration.

6. You can hear the printer starting up. It takes the printer longer to start up from a cold start rather than from

a warm start.

Symptom tables

The tables in this section provide detailed troubleshooting information.

Reading is not performed

Scan module does not move to home position

The power does not come on. Go to “The power does not come on” on page 2-13.

Frequent paper jam, double feed, or skew Go to “Frequent paper jam, double feed, or skew” on

page 2-13.

Image does not appear Go to “Image does not appear” on page 2-13.

Image unclear Go to “Image unclear” on page 2-14.

Large jitter Go to “Large jitter” on page 2-14.

Reading position deviation Go to “Reading position deviation” on page 2-14.

Strange sound generated (ADF) Go to “Strange sound generated (ADF)” on page 2-14.

Strange sound generated (flatbed) Go to “Strange sound generated (flatbed)” on page 2-15.

Cause Relevant unit Check Action

ADF cover open ADF cover Visual check Close the ADF cover.

Cause Relevant Unit Check Action

Carrier is in locked position None Visual check Unlock carrier

Diagnostic information 2-3

4036-307/308

Error codes and messages

Service error codes

Service error codes are generally non-recoverable except in an intermittent condition when you can POR the

printer to temporarily recover from the error condition.

Service error codes are indicated by a three-digit error code followed by a period and additional numbers in the

format XXX.YY. In most cases, five digits are shown. Additional sub error codes display if you press and hold

and 2 when an error message is displayed. Not all error conditions have additional sub error information.

Sub error codes for 8xx and 2xx error codes

The sub error codes are helpful when troubleshooting a paper path problem, especially paper jams in the base

printer, envelope feeder, and duplex option.

To display sub error codes (where available)

When an 8xx or 2xx error displays:

1. Press and hold and 2 to view for sub error codes.

The first screen of information displays. Write down the information.

2. Continue pressing and 2 until each screen of information is obtained.

3. When the last screen displays, the original message displays.

Printed error codes

Additional codes are available in the Menus and Messages Guide for this option and the Service Manual for the

base printer. Wording for the codes may differ when this option is installed. Unique scanner and faxing codes

are listed below:

Error

code

Sub

codes

Displayed message Description Action

841 .00 Image Pipeline Image pipeline ASIC Replace scanner control board

842 .00 Scanner Failure Communication failure between

A1 and scanner control boards

See “842.00 Scanner failure” on

page 2-15.

843 .00 Scanner Failure Carriage mechanical failure See “843.00 Scanner failure” on

page 2-15.

843 .01 Scanner Failure ADF mechanical failure Replace ADF optical unit

844 .00 Front scan module output

level error

Flatbed See “844.00 Front scan module

output level error” on page 2-15.

844 .01 Rear scan module output

level error

ADF See “844.01 Rear scan module

output level error” on page 2-16.

844 .02 Front scan module lamp

level too low

Front Mono channel, Front Color

channels, Front Red channel,

Front Green Channel, and/or

Front Blue channel is detected to

have low lamp level.

See “844.02 Front scan module

lamp level too low” on page 2-16.

844 .03 Rear scan module lamp

level too low

Rear Mono channel, Rear Color

channels, Rear Red channel,

Rear Green channel, and/or Rear

Blue channel is detected to have

low lamp level.

Replace ADF optical unit

2-4 Service Manual

4036-307/308

844 .04 Front scan module has

excessive noise

This will manifest itself by

creating a fuzzy image.

Replace flatbed optical unit

844 .05 Rear scan module has

excessive noise

This will manifest itself by

creating a fuzzy image.

Replace ADF optical unit

844 .06 Front scan module has

excessive variability

Replace flatbed optical unit

844 .07 Rear scan module has

excessive variability

Replace ADF optical unit

844 .08 Front scan module banding Replace flatbed optical unit

844 .09 Rear scan module banding Replace ADF optical unit

845 .00 Front scan module cable

failure or SCC card failure

CCD channel failure

Check each channel (mono, R, G,

B) for identical values indicating

bad cable and/or SCC card.

Excessive noise test for the dark

data indicating some sort of CCD

or analog electronics issue on

that channel or channels.

See “845.00 Front scan module

cable failure or SCC card failure

CCD channel failure” on

page 2-16.

845 .01 Rear scan module cable

failure or SCC card failure

CCD channel failure

Check each channel (mono, R, G,

B) for identical values indicating

bad cable and/or SCC card.

Excessive noise test for the dark

data indicating some sort of CCD

or analog electronics issue on

that channel or channels.

See “845.01 Rear scan module

cable failure or SCC card failure

CCD channel failure” on

page 2-16.

845 .02 Cable/SCC Failure Front scan module connector or

cable failure

See “845.02 Cable/SCC failure”

on page 2-16.

845 .03 Cable/SCC Failure Rear scan module connector or

cable failure

See “845.03 Cable/SCC failure”

on page 2-17.

845 .04 Cable Failure The connector cable is defective. Replace PCI Cable

846 .00 Front calibration strip

unusable

See “846.xx Front calibration

strip” on page 2-17.

846 .01 Rear calibration strip

unusable

Replace ADF optical unit

846 .02 Front calibration strip too

far left (The Front

Calibration Strip is placed

too high or too low.)

See “846.xx Front calibration

strip” on page 2-17.

846 .03 Front calibration strip too

far right

See “846.xx Front calibration

strip” on page 2-17.

846 .04 Front calibration strip has

excessive skew

See “846.xx Front calibration

strip” on page 2-17.

846 .05 Front calibration strip has

excessive bow

See “846.xx Front calibration

strip” on page 2-17.

846 .06 Front calibration strip

insufficient dark area

Front excessive variability for

Mono, Red, Green, or Blue

See “846.xx Front calibration

strip” on page 2-17.

846 .07 Front magnification

exceeds limits

Rear excessive variability for

Mono, Red, Green, or Blue

See “846.xx Front calibration

strip” on page 2-17.

Error

code

Sub

codes

Displayed message Description Action

Diagnostic information 2-5

4036-307/308

847 .00 Modem Failure The Configuration ID bit that

describes the device’s modem

doesn’t match the actual modem

installed in the device.

Replace modem card

848 .00 Modem/Config ID

Mismatch

A device doesn’t have a modem

installed, even though its

Configuration ID indicates that a

modem should be present.

See “848.00 Modem/config ID

mismatch” on page 2-17.

848 .01 Modem/Config ID

Mismatch

A device has a modem installed,

but its Configuration ID indicates

that a modem shouldn’t be

present.

See “848.01 Modem/config ID

mismatch” on page 2-18.

849 .00 HD/Config ID Mismatch A device doesn’t have a hard

drive installed, even though its

Configuration ID indicates that a

hard drive should be present.

Replace hard drive

See “849.00 HD/config ID

mismatch” on page 2-18.

Error

code

Sub

codes

Displayed message Description Action

2-6 Service Manual

4036-307/308

User attendance messages

Additional messages may appear, and most are documented in the Menus and Messages Guide for this option

and the Service Manual for the base printer. The messages listed below pertain to the scanner portion rather

than the base printer.

User attendance messages

Error

code

Sub

codes

Display text Description Action

Clean scanner

glass

During a scanner calibration,

the firmware detects that a

scanner ADF or the flatbed

(scanner) glass may be dirty.

Touch Cancel Job if a scan job is

processing when the attendance message

appears. This cancels the job and clears

the message.

Touch Scan from Automatic Document

Feeder if the page jam recovery is active.

Scanning resumes from the ADF

immediately after the last successfully

scanned page.

Touch Scan from flatbed if page jam

recovery is active. Scanning resumes from

the flatbed immediately after the last

successfully scanned page.

Touch Finish job without further

scanning if page jam recovery is active.

The job ends at the last successfully

scanned page, but the job is not canceled.

Successfully scanned pages go to their

destination: copy, fax, e-mail, or FTP.

Touch Restart job if job recovery is active

and the job is restartable. The message

clears. A new scan job containing the

same parameters as the previous job

starts.

Disk Full – Scan

Job Canceled

The scan job cancels or stops

due to insufficient hard disk

space.

Note: The scanner finishes scanning

currently committed pages in the ADF, but

data is lost when the job cancels itself.

Touch Continue to clear the message.

Fax Memory Full There is no memory to

complete a fax job. Any

attempted fax jobs are

canceled.

Touch Continue to clear the message.

La pagina sta caricando ...

Lexmark 4036-308 Manuale utente

Questo manuale è adatto anche per

Lexmark 4036-308 Manuale utente

in altre lingue

Documenti correlati

Altri documenti