Juniper EX4200-24F Manuale utente

EX4200 Switch Hardware Guide

Modified: 2017-07-05

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United

States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other

trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

EX4200 Switch Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the

year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks

software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at

http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of

that EULA.

Table of Contents

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Supported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix

Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

Part 1 Overview

Chapter 1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

EX4200 Switches Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Uplink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Power over Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

EX4200 Switch Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

EX4200 Switch Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . . . . . . 6

Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chassis Physical Specifications for EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . 9

Field-Replaceable Units in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Panel of an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rear Panel of an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

LCD Panel in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

LCD Panel Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

LCD Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Uplink Modules in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SFP+ Uplink Module and SFP+ MACsec Uplink Module . . . . . . . . . . . . . . . . . 19

XFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Chassis Status LEDs in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Management Port LEDs in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Network Port LEDs in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chapter 3 Cooling System and Airflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Cooling System and Airflow in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 31

Fan Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Airflow Direction in the EX4200 Switch Chassis . . . . . . . . . . . . . . . . . . . . . . . 31

Chapter 4 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Power Supply in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

DC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

PoE Power Budget and AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

AC Power Supply LEDs in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DC Power Supply LEDs in EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 5 Viewing System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Dashboard for EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Graphical Chassis Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

System Information Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Health Status Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Capacity Utilization Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Alarms Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

File System Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Chassis Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Part 2 Site Planning, Preparation, and Specifications

Chapter 6 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Site Preparation Checklist for EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Environmental Requirements and Specifications for EX Series Switches . . . . . . . 62

General Site Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Rack Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Requirements for Mounting an EX4200 Switch on a Desktop or Wall . . . . . . . . . 69

Clearance Requirements for Airflow and Hardware Maintenance for EX4200

Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Chapter 7 Power Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Power Specifications for EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

AC Power Cord Specifications for EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . 74

Calculating the EX Series Switch Fiber-Optic Cable Power Budget . . . . . . . . . . . . 76

Calculating the EX Series Switch Fiber-Optic Cable Power Margin . . . . . . . . . . . . 76

Chapter 8 Transceiver and Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Pluggable Transceivers Supported on EX4200 Switches . . . . . . . . . . . . . . . . . . . 79

Pluggable Transceivers Supported on EX Series Switches . . . . . . . . . . . . . . . . . . 80

SFP+ Direct Attach Copper Cables for EX Series Switches . . . . . . . . . . . . . . . . . . 81

Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Standards Supported by These Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Management Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation,

and Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Signal Loss in Multimode and Single-Mode Fiber-Optic Cable . . . . . . . . . . . 88

Attenuation and Dispersion in Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . 89

EX4200 Switch Hardware Guide

Chapter 9 Pinout Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Console Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

USB Port Specifications for an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 92

RJ-45 Management Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . . 93

RJ-45 Port, QSFP+ Port, SFP+ Port, and SFP Port Connector Pinout

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

RJ-45 to DB-9 Serial Port Adapter Pinout Information . . . . . . . . . . . . . . . . . . . . . 98

Uplink Modules Connector Pinout Information for EX4200 Switches . . . . . . . . . 99

Virtual Chassis Ports Connector Pinout Information for EX4200 Switches . . . . . 107

Chapter 10 Planning the Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware

Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Ports Used to Interconnect Virtual Chassis Members . . . . . . . . . . . . . . . . . . . 111

Number of Switches, Required Software Releases, and Member Roles That

You Configure in the Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Virtual Chassis Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Switch Role and Member ID on the LCD Panel . . . . . . . . . . . . . . . . . . . . . . . . 114

Planning EX4200, EX4500, and EX4550 Virtual Chassis . . . . . . . . . . . . . . . . . . . 114

Virtual Chassis Cabling Configuration Examples for EX4200 Switches . . . . . . . . 116

Part 3 Initial Installation and Configuration

Chapter 11 Unpacking the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Unpacking an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Parts Inventory (Packing List) for an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . 122

Registering Products—Mandatory for Validating SLAs . . . . . . . . . . . . . . . . . . . . . 124

Chapter 12 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Installing and Connecting an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Mounting an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Mounting an EX4200 Switch on a Desk or Other Level Surface . . . . . . . . . . . . . . 129

Mounting an EX4200 Switch on Two Posts in a Rack or Cabinet . . . . . . . . . . . . 130

Mounting an EX4200 Switch on Four Posts in a Rack or Cabinet . . . . . . . . . . . . 133

Mounting an EX4200 Switch in a Recessed Position in a Rack or Cabinet . . . . . . 137

Mounting an EX4200 Switch on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Installing and Removing EX4200 Switch Hardware Components . . . . . . . . . . . 140

Chapter 13 Connecting the Switch to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Connecting Earth Ground to an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . 143

Parts and Tools Required for Connecting an EX Series Switch to Earth

Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Special Instructions to Follow Before Connecting Earth Ground to a

Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Connecting Earth Ground to an EX Series Switch . . . . . . . . . . . . . . . . . . . . . 148

Connecting AC Power to an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Connecting DC Power to an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Table of Contents

Chapter 14 Connecting the Switch to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Connecting a Device to a Network for Out-of-Band Management . . . . . . . . . . . . 157

Connecting a Device to a Management Console by Using an RJ-45

Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

Connecting a Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Chapter 15 Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

EX4200 Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Connecting and Configuring an EX Series Switch (CLI Procedure) . . . . . . . . . . . 165

Connecting and Configuring an EX Series Switch (J-Web Procedure) . . . . . . . . . 168

Configuring the LCD Panel on EX Series Switches (CLI Procedure) . . . . . . . . . . . 173

Disabling or Enabling Menus and Menu Options on the LCD Panel . . . . . . . . 173

Configuring a Custom Display Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

Part 4 Installing, Maintaining, and Replacing Components

Chapter 16 Replacing Cooling System Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Installing a Fan Tray in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Removing a Fan Tray from an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Chapter 17 Replacing Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Installing a Power Supply in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Removing a Power Supply from an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . 185

Chapter 18 Replacing Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Installing an Uplink Module in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 187

Removing an Uplink Module from an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . 189

Chapter 19 Replacing Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Installing a Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Removing a Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Chapter 20 Maintaining and Replacing Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . 199

Connecting a Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Disconnecting a Fiber-Optic Cable from a Device . . . . . . . . . . . . . . . . . . . . . . . . 200

Maintaining Fiber-Optic Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Chapter 21 Replacing a Member Switch to Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . 203

Adding a New EX4200 Switch to an Existing EX4200 Virtual Chassis (CLI

Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Adding a New Switch to an Existing Virtual Chassis Within the Same Wiring

Closet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Adding a New Switch from a Different Wiring Closet to an Existing Virtual

Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Adding a New Switch to an Existing Preprovisioned Virtual Chassis Using

Autoprovisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Replacing a Member Switch of a Virtual Chassis Configuration (CLI

Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

Remove, Repair, and Reinstall the Same Switch . . . . . . . . . . . . . . . . . . . . . 209

Remove a Member Switch, Replace It with a Different Switch, and Reapply

the Old Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

EX4200 Switch Hardware Guide

Remove a Member Switch and Make Its Member ID Available for

Reassignment to a Different Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

Chapter 22 Maintaining and Replacing Virtual Chassis Cable . . . . . . . . . . . . . . . . . . . . . 213

Connecting a Virtual Chassis Cable to an EX4200 Switch . . . . . . . . . . . . . . . . . . 213

Disconnecting a Virtual Chassis Cable from an EX4200 Switch . . . . . . . . . . . . . 214

Chapter 23 Contacting Customer Support and Returning the Chassis or

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Returning an EX4200 Switch or Component for Repair or Replacement . . . . . . . 217

Locating the Serial Number on an EX4200 Switch or Component . . . . . . . . . . . 218

Listing the Switch and Components Details with the CLI . . . . . . . . . . . . . . . 218

Locating the Chassis Serial Number ID Label on an EX4200 Switch . . . . . . 218

Locating the Serial Number ID Labels on FRUs in an EX4200 Switch . . . . . 219

Contacting Customer Support to Obtain Return Material Authorization . . . . . . . 219

Packing an EX4200 Switch or Component for Shipping . . . . . . . . . . . . . . . . . . . 220

Packing an EX4200 Switch for Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

Packing EX4200 Switch Components for Shipping . . . . . . . . . . . . . . . . . . . . 221

Part 5 Troubleshooting

Chapter 24 Alarms and Syslog Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Understanding Alarm Types and Severity Levels on EX Series Switches . . . . . . 225

Chassis Component Alarm Conditions on EX4200 Switches . . . . . . . . . . . . . . . 226

Checking Active Alarms with the J-Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . 231

Monitoring System Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

Chapter 25 Troubleshooting Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Troubleshooting Network Interfaces on EX4200 Switches . . . . . . . . . . . . . . . . . 237

The interface on the port in which an SFP or SFP+ transceiver is installed is

down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Troubleshooting Virtual Chassis Port Connectivity on an EX4200 Switch . . . . . 238

Virtual Chassis port (VCP) connection does not work . . . . . . . . . . . . . . . . . 238

Troubleshooting Power Supply Installation Alarms on EX4200 Switches . . . . . 238

The Switch Displays the “Unsupported PSU” Alarm . . . . . . . . . . . . . . . . . . . 239

Part 6 Safety and Compliance Information

Chapter 26 General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

Definitions of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246

Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

Chapter 27 Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

Chapter 28 Installation Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . 251

Installation Instructions Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Chassis Lifting Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Restricted Access Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Table of Contents

Ramp Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254

Rack-Mounting and Cabinet-Mounting Warnings . . . . . . . . . . . . . . . . . . . . . . . . 254

Wall-Mounting Warning for EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

Grounded Equipment Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

Chapter 29 Radiation and Laser Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . 261

Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 261

General Laser Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

Laser Beam Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

Chapter 30 Maintenance and Operational Safety Warnings . . . . . . . . . . . . . . . . . . . . . . 265

Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . . . . . . 265

Battery Handling Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267

Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268

Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Chapter 31 Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . 271

Action to Take After an Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

Prevention of Electrostatic Discharge Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

AC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274

AC Power Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

DC Power Electrical Safety Guidelines for Switches . . . . . . . . . . . . . . . . . . . . . . . 276

DC Power Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279

DC Power Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . 280

DC Power Wiring Sequence Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

DC Power Wiring Terminations Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . 284

TN Power Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

Chapter 32 Agency Approvals and Compliance Statements . . . . . . . . . . . . . . . . . . . . . 287

Agency Approvals for EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

Compliance Statements for EMC Requirements for EX Series Switches . . . . . . 288

Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288

European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

Israel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

FCC Part 15 Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

Nonregulatory Environmental Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291

Compliance Statements for Acoustic Noise for EX Series Switches . . . . . . . . . . 292

EX4200 Switch Hardware Guide

List of Figures

Part 1 Overview

Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 1: EX4200 Switch with 48 Gigabit Ethernet Ports . . . . . . . . . . . . . . . . . . . . . 11

Figure 2: EX4200 Switch with 24 Gigabit Ethernet Ports . . . . . . . . . . . . . . . . . . . . . 11

Figure 3: EX4200-24F Switch with 24 SFP Ports . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 4: EX4200 Switch Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 5: LCD Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 6: SFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 7: SFP+ and SFP+ MACsec Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . 20

Figure 8: XFP Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 9: Chassis Status LEDs in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 10: LEDs on the Management Port on an EX4200 Switch . . . . . . . . . . . . . 24

Figure 11: LEDs on the Network Ports on the Front Panel . . . . . . . . . . . . . . . . . . . . 25

Figure 12: LEDs on the Uplink Module Ports on the SFP Uplink Module . . . . . . . . . 25

Figure13: LEDs on the Uplink Module Ports on the SFP+ and SFP+ MACsec Uplink

Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Figure 14: LEDs on the Uplink Module Ports on the XFP Uplink Module . . . . . . . . 26

Chapter 3 Cooling System and Airflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 15: Fan Tray Used in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 16: Airflow Through the EX4200 Switch Chassis . . . . . . . . . . . . . . . . . . . . . 32

Chapter 4 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Figure 17: 320 W AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Figure 18: 600 W and 930 W AC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Figure 19: DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Part 2 Site Planning, Preparation, and Specifications

Chapter 6 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Figure 20: Clearance Requirements for Airflow and Hardware Maintenance for

EX4200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Figure 21: Airflow Through the EX4200 Switch Chassis . . . . . . . . . . . . . . . . . . . . . . 71

Chapter 7 Power Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Figure 22: AC Plug Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chapter 8 Transceiver and Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Figure 23: SFP+ Direct Attach Copper Cables for EX Series Switches . . . . . . . . . . 81

Chapter 10 Planning the Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Figure 24: EX4200 Switches Mounted on a Single Rack and Connected in a Ring

Topology Using Short and Long Cables: Option 1 . . . . . . . . . . . . . . . . . . . . . . 117

Figure 25: EX4200 Switches Mounted on a Single Rack and Connected in a Ring

Topology Using Short and Long Cables: Option 2 . . . . . . . . . . . . . . . . . . . . . . 117

Figure 26: EX4200 Switches Mounted on a Single Rack and Connected in a Ring

Topology Using Short and Medium Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Figure 27: EX4200 Switches Mounted on Adjacent Racks and Connected in a

Ring Topology Using Medium and Long Cables: Option 1 . . . . . . . . . . . . . . . . 118

Figure 28: EX4200 Switches Mounted on Adjacent Racks and Connected in a

Ring Topology Using Medium and Long Cables: Option 2 . . . . . . . . . . . . . . . 118

Part 3 Initial Installation and Configuration

Chapter 11 Unpacking the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Figure 29: Unpacking an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Chapter 12 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Figure 30: Attaching Rubber Feet to an EX4200 Switch Chassis . . . . . . . . . . . . . 130

Figure 31: Attaching the Mounting Bracket to the Side Panel of the Switch . . . . . 132

Figure 32: Mounting the Switch on Two Posts in a Rack . . . . . . . . . . . . . . . . . . . . 132

Figure 33: Attaching the Front-Mounting Bracket to the Side Mounting-Rail . . . 135

Figure 34: Attaching the Side Mounting-Rail to the Switch Chassis . . . . . . . . . . . 135

Figure 35: Mounting the Switch to the Front Posts in a Rack . . . . . . . . . . . . . . . . 136

Figure 36: Sliding the Rear Mounting-Blades into the Side-Mounting Rail . . . . . 136

Figure 37: Attaching Wall-Mount Brackets to the Switch Chassis . . . . . . . . . . . . 139

Figure 38: Mounting the Switch on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Chapter 13 Connecting the Switch to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Figure 39: Connecting the Grounding Lug to a Switch Mounted on Four Posts of

a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Figure 40: Connecting a Grounding Cable to an EX Series Switch . . . . . . . . . . . . 148

Figure 41: Connecting the AC Power Cord Retainer Clip to an AC Power Supply

in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Figure 42: Connecting an AC Power Cord to an AC Power Supply in an EX4200

Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Figure 43: DC Power Supply in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 152

Figure 44: Removing the Terminal Block Cover from a DC Power Supply . . . . . . 153

Figure 45: Securing Ring Lugs to the Terminals on the DC Power Supply . . . . . . 155

Chapter 14 Connecting the Switch to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Figure 46: RJ-45 Connector on an Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . . 157

Figure 47: Connecting a Device to a Network for Out-of-Band Management . . . 158

Figure 48: RJ-45 Connector on an Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . 158

Figure 49: Connecting a Device to a Management Console Through a Console

Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Figure 50: Connecting a Device Directly to a Management Console . . . . . . . . . . 159

Figure 51: Connecting a Fiber-Optic Cable to an Optical Transceiver Installed in

a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Chapter 15 Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

EX4200 Switch Hardware Guide

Figure 52: LCD Panel in an EX3200, EX4200, EX4500, EX4550, or EX8200

Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Figure 53: LCD Panel in an EX4300 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Part 4 Installing, Maintaining, and Replacing Components

Chapter 16 Replacing Cooling System Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Figure 54: Installing a Fan Tray in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . 180

Figure 55: Removing a Fan Tray from an EX4200 Switch . . . . . . . . . . . . . . . . . . . 181

Chapter 17 Replacing Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Figure 56: Installing a Power Supply in an EX4200 Switch . . . . . . . . . . . . . . . . . 184

Figure 57: Removing a Power Supply from the Switch . . . . . . . . . . . . . . . . . . . . . 186

Chapter 18 Replacing Uplink Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Figure 58: Installing an Uplink Module in an EX4200 Switch . . . . . . . . . . . . . . . . 189

Figure 59: Sliding the Screwdriver to the Narrow Part of the Keyhole . . . . . . . . . . 191

Figure 60: Removing an Uplink Module from an EX4200 Switch . . . . . . . . . . . . . 191

Chapter 19 Replacing Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Figure 61: Installing a Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Figure 62: Removing an SFP, SFP+, XFP, or a QSFP+ Transceiver . . . . . . . . . . . . 197

Chapter 20 Maintaining and Replacing Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . 199

Figure 63: Connecting a Fiber-Optic Cable to an Optical Transceiver Installed in

a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

Chapter 22 Maintaining and Replacing Virtual Chassis Cable . . . . . . . . . . . . . . . . . . . . . 213

Figure 64: Connecting a Virtual Chassis Cable to an EX4200 Switch . . . . . . . . . 214

Figure 65: Virtual Chassis Cable Connector in an EX4200 Switch . . . . . . . . . . . . 215

Chapter 23 Contacting Customer Support and Returning the Chassis or

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Figure 66: Location of the Serial Number ID Label on an EX4200 Switch . . . . . . 219

Part 6 Safety and Compliance Information

Chapter 31 Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

Figure 67: Placing a Component into an Antistatic Bag . . . . . . . . . . . . . . . . . . . . 274

List of Figures

EX4200 Switch Hardware Guide

List of Tables

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Part 1 Overview

Chapter 1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Table 3: EX4200 Switch Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Table 4: CLI Equivalents of Terms Used in Documentation for EX4200

Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Table 5: Physical Specifications of the Switch Chassis . . . . . . . . . . . . . . . . . . . . . . 9

Table 6: LCD Panel Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Table 7: Chassis Status LEDs in an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 22

Table 8: Link/Activity LED on the Management Port on EX4200 Switches . . . . . . 24

Table 9: Status LED on the Management Port on EX4200 Switches . . . . . . . . . . 24

Table 10: Link/Activity LED on Network Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Table 11: Status LED on Network Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Chapter 4 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Table 12: Power Supply Rating and PoE Power Budget for EX4200 Switch

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Table 13: AC Power Supply LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Table 14: DC Power Supply LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 5 Viewing System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Table 15: Details of a Virtual Chassis Member Switch . . . . . . . . . . . . . . . . . . . . . . 40

Table 16: Status of a Member Switch in a Virtual Chassis . . . . . . . . . . . . . . . . . . . . 41

Table 17: System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Table 18: Health Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Table 19: Capacity Utilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Table 20: Chassis Viewer for EX2200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Table 21: Chassis Viewer for EX2200-C Switches . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Table 22: Chassis Viewer for EX3200, EX3300, and EX4200 Switches . . . . . . . . 47

Table 23: Chassis Viewer for EX4300 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 24: Chassis Viewer for EX4500 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Table 25: Chassis Viewer for EX4550 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Table 26: Chassis Viewer for EX4600 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Table 27: Chassis Viewer for EX6210 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Table 28: Chassis Viewer for EX8208 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Table 29: Chassis Viewer for EX8216 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Table 30: Chassis Viewer for XRE200 External Routing Engines . . . . . . . . . . . . . . 56

Part 2 Site Planning, Preparation, and Specifications

Chapter 6 Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Table 31: Site Preparation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Table 32: EX Series Switch Environmental Tolerances . . . . . . . . . . . . . . . . . . . . . . 63

Table 33: Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Table 34: Rack Requirements and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 68

Table 35: Cabinet Requirements and Specifications . . . . . . . . . . . . . . . . . . . . . . . 69

Chapter 7 Power Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Table 36: AC Power Supply Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . 73

Table 37: DC Power Supply Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . 73

Table 38: AC Power Cord Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Table 39: Estimated Values for Factors Causing Link Loss . . . . . . . . . . . . . . . . . . 77

Chapter 8 Transceiver and Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Table 40: Software Support for SFP+ Passive Direct Attach Copper Cables for

EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Table 41: SFP+ Direct Attach Copper Cable Specifications . . . . . . . . . . . . . . . . . . 84

Table 42: Specifications of Cables to Connect to Management Devices . . . . . . . 88

Chapter 9 Pinout Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Table 43: Console Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . . . . 91

Table 44: RJ-45 Management Port Connector Pinout Information . . . . . . . . . . . . 93

Table 45: 10/100/1000BASE-T Ethernet Network Port Connector Pinout

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Table 46: SFP Network Port Connector Pinout Information . . . . . . . . . . . . . . . . . 94

Table 47: SFP+ Network Port Connector Pinout Information . . . . . . . . . . . . . . . . 95

Table 48: QSFP+ Network Port Connector Pinout Information . . . . . . . . . . . . . . . 96

Table 49: RJ-45 to DB-9 Serial Port Adapter Pinout Information . . . . . . . . . . . . . 98

Table 50: Uplink Modules Connector Pinout Information . . . . . . . . . . . . . . . . . . . 99

Table 51: Virtual Chassis Ports (VCPs) Connector Pinout Information . . . . . . . . . 107

Chapter 10 Planning the Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Table 52: Number of Switches and Switch Roles for an EX4200 Virtual Chassis,

per Junos OS Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Table 53: Number of Switches and Switch Roles for an EX4500 Virtual Chassis,

per Junos OS Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Table 54: Number of Switches and Switch Roles for an EX4550 Virtual Chassis,

per Junos OS Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Table 55: Number of Switches and Switch Roles for a Mixed EX4200, EX4500,

and EX4550 Virtual Chassis, per Junos OS Release . . . . . . . . . . . . . . . . . . . . 113

Table 56: Virtual Chassis Components to Consider When Planning an EX4200,

EX4500, and EX4550 Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Table 57: Cabling Requirements for a Virtual Chassis . . . . . . . . . . . . . . . . . . . . . . 115

Part 3 Initial Installation and Configuration

Chapter 11 Unpacking the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

EX4200 Switch Hardware Guide

Table 58: Packing List for an EX4200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Chapter 13 Connecting the Switch to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Table 59: Parts and Tools Required for Connecting an EX Series Switch to Earth

Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Table 60: Special Instructions to Follow Before Connecting Earth Ground to a

Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Part 5 Troubleshooting

Chapter 24 Alarms and Syslog Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Table 61: Alarm Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Table 62: Chassis Component Alarm Conditions on EX4200 Switches . . . . . . . 227

Table 63: Summary of Key Alarm Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . 232

Table 64: Filtering System Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

Table 65: Viewing System Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

List of Tables

EX4200 Switch Hardware Guide

About the Documentation

•

Documentation and Release Notes on page xvii

•

Supported Platforms on page xvii

•

Documentation Conventions on page xvii

•

Documentation Feedback on page xix

•

Requesting Technical Support on page xx

Documentation and Release Notes

To obtain the most current version of all Juniper Networks

®

technical documentation,

see the product documentation page on the Juniper Networks website at

http://www.juniper.net/techpubs/.

If the information in the latest release notes differs from the information in the

documentation, follow the product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject

matter experts. These books go beyond the technical documentation to explore the

nuances of network architecture, deployment, and administration. The current list can

be viewed at http://www.juniper.net/books.

Supported Platforms

For the features described in this document, the following platforms are supported:

•

EX4200

Documentation Conventions

Table 1 on page xviii defines notice icons used in this guide.

Table 1: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware damage.Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Indicates helpful information.Tip

Alerts you to a recommended use or implementation.Best practice

Table 2 on page xviii defines the text and syntax conventions used in this guide.

Table 2: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type the

configure command:

user@host> configure

Represents text that you type.Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on the

terminal screen.

Fixed-width text like this

•

A policy term is a named structure

that defines match conditions and

actions.

•

Junos OS CLI User Guide

•

RFC 1997, BGP Communities Attribute

•

Introduces or emphasizes important

new terms.

•

Identifies guide names.

•

Identifies RFC and Internet draft titles.

Italic text like this

Configure the machine’s domain name:

[edit]

root@# set system domain-name

domain-name

Represents variables (options for which

you substitute a value) in commands or

configuration statements.

Italic text like this

EX4200 Switch Hardware Guide

Table 2: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

•

To configure a stub area, include the

stub statement at the [edit protocols

ospf area area-id] hierarchy level.

•

The console port is labeledCONSOLE.

Represents names of configuration

statements, commands, files, and

directories; configuration hierarchy levels;

or labels on routing platform

components.

Text like this

stub <default-metric metric>;Encloses optional keywords or variables.< > (angle brackets)

broadcast | multicast

(string1 | string2 | string3)

Indicates a choice between the mutually

exclusive keywords or variables on either

side of the symbol. The set of choices is

often enclosed in parentheses for clarity.

| (pipe symbol)

rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the

same line as the configuration statement

to which it applies.

# (pound sign)

community name members [

community-ids ]

Encloses a variable for which you can

substitute one or more values.

[ ] (square brackets)

[edit]

routing-options {

static {

route default {

nexthop address;

retain;

}

Identifies a level in the configuration

hierarchy.

Indention and braces ( { } )

Identifies a leaf statement at a

configuration hierarchy level.

; (semicolon)

GUI Conventions

•

In the Logical Interfaces box, select

All Interfaces.

•

To cancel the configuration, click

Cancel.

Represents graphical user interface(GUI)

items you click or select.

Bold text like this

In the configuration editor hierarchy,

select Protocols>Ospf.

Separates levels in a hierarchy of menu

selections.

> (bold right angle bracket)

Documentation Feedback

We encourage you to provide feedback, comments, and suggestions so that we can

improve the documentation. You can provide feedback by using either of the following

methods:

•

Online feedback rating system—On any page of the Juniper Networks TechLibrary site

at http://www.juniper.net/techpubs/index.html, simply click the stars to rate the content,

and use the pop-up form to provide us with information about your experience.

Alternately, you can use the online feedback form at

http://www.juniper.net/techpubs/feedback/.

About the Documentation

•

E-mail—Send your commentstotechpubs-comments@juniper.net. Includethe document

or topic name, URL or page number, and software version (if applicable).

Requesting Technical Support

Technical product support is available through the Juniper Networks Technical Assistance

Center (JTAC). If you are a customer with an active J-Care or Partner Support Service

support contract, or are covered under warranty, and need post-sales technical support,

you can access our tools and resources online or open a case with JTAC.

•

JTAC policies—For a complete understanding of our JTAC procedures and policies,

review the JTAC User Guide located at

http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.

•

Product warranties—For product warranty information, visit

http://www.juniper.net/support/warranty/.

•

JTAC hours of operation—The JTAC centers have resources available 24 hours a day,

7 days a week, 365 days a year.

Self-Help Online Tools and Resources

For quick and easy problem resolution, Juniper Networks has designed an online

self-service portal called the Customer Support Center (CSC) that provides you with the

following features:

•

Find CSC offerings: http://www.juniper.net/customers/support/

•

Search for known bugs: http://www2.juniper.net/kb/

•

Find product documentation: http://www.juniper.net/techpubs/

•

Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/

•

Download the latest versions of software and review release notes:

http://www.juniper.net/customers/csc/software/

•

Search technical bulletins for relevant hardware and software notifications:

http://kb.juniper.net/InfoCenter/

•

Join and participate in the Juniper Networks Community Forum:

http://www.juniper.net/company/communities/

•

Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/

To verify service entitlement by productserial number, use our Serial Number Entitlement

(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/

Opening a Case with JTAC

You can open a case with JTAC on the Web or by telephone.

•

Use the Case Management tool in the CSC at http://www.juniper.net/cm/.

•

Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

EX4200 Switch Hardware Guide

La pagina sta caricando ...

Juniper EX4200-24F Manuale utente

Juniper EX4200-24F Manuale utente

in altre lingue

Documenti correlati

Altri documenti