Candy FCXE818XWIFI/E Manuale utente

Marca: Candy

Modello: FCXE818XWIFI/E

Categoria: Microonde

Tipo: Manuale utente

Questo manuale è adatto anche per

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

CANDY HOOVER GROUP S.R.L. • Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

KULLANIM KILAVUZU

FIRINLAR

POKYNY PRO UŽIVATELE

TROUBY

• FCXE818XWIFI

• FCXM625

INSTRUÇÕES DO UTILIZADOR

FORNOS

Safety Indications

• WARNING: the appliance and accessible parts become hot during use.

Be carefulnottotouch anyhot parts.

•WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept at a safe distance.

•WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoidthe possibility of electric shocks.

•WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not

be powered by an external switching device, such as a timer, or be

connected to a circuitthat is regularlyswitchedon and off.

•WARNING: beforeinitiatingthe automatic cleaning cycle:

- Clean the ovendoor;

- Remove large or coarse foodresidues from the inside of the oven using

a damp sponge. Do not use detergents;

- Removeall accessories and the sliding rackkit (where present);

- Do not place tea towels

• In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with

the nut when the meat probe is not used.

•Children under 8 should be kept at a safe distance from the appliance

if not continuouslysupervised.

•Children should not play with the appliance. The appliance can be

used by those aged 8 or over and by those with limited physical,

sensorial or mental capacities, without experience or knowledge of the

product, only if supervised or provided with instruction as to the

operation of the appliance, in a safe way with awareness of the possible

risks.

•Cleaning and maintenance should not be carried out by unsupervised

children.

•Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

•The oven must be switched off before removing the removable parts

and, after cleaning, reassemble them according the instructions.

GB 02

•Only use the meat proberecommended for this oven.

•Do not use a steam cleaner.

•Put the plug into a socket equipped with a third contact which

corresponds to the earth and which must be connected and in

operation. For models without a plug, attach a standard plug to the

cable that is able to bear the load indicated on the tag. The earth

conductor is yellow-green in colour. This operation should be carried

out by a suitably qualified professional. In case of incompatibility

between the socket and the appliance plug, ask a qualified electrician to

substitute the socket with another suitable type. Connection to the

power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the

maximum connected load and that is in line with current legislation. The

yellow-green earth cable should not be interrupted by the breaker. The

socket or omnipolar breaker used for the connection should be easily

accessible when the appliance is installed.

•If the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department.

If the cable is damaged, replace it promptly in accordance with the

following instructions:

- Open the cover of the terminal block;

- remove the power cable and substitute it with a similar cable which is

compatible with the appliance (type H05VV-F, H05V2V2-F).

•This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spareparts.

•Failure to comply with the above can compromise the safety of the

appliance and invalidatethe guarantee.

•Any excess of spilled materialshould be removed beforecleaning.

•During the pyrolytic cleaning process, surfaces can heat up more than

usual, children should therefore be kept ata safe distance.

GB 03

Summary

GB 04

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Maintenance

• Removal of the oven window

• Removal and cleaning of the side racks

• Removal and cleaning of the glass

door

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructionscontainedin this documentare not observed.

NOTE: The oven functions, properties and accessories cited in this manual will vary, depending on the

model youhavepurchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsibleforany damageresulting fromimproper,incorrector unreasonable usage.

The use ofany electricalappliance implies the observance ofsome fundamental rules:

- Do notpull on the power cableto disconnectthe plug fromthe socket;

- Do nottouch the appliance with wetor damp hands or feet;

- In general the use of adaptors, multiplesockets and extension cables is notrecommended;

- In caseof malfunction and/orpoor operation,switch offthe appliance and do not tamperwith it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibilityforany damage causedby the failure to observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section thatcan ensurecorrect supply tothe oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connectedto the electricalsupply, it is importantto check:

- Power voltage indicatedon the gauge;

- The settingof the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the powersupply.

WARNING

Before connecting the ovento the power supply, ask a qualifiedelectrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

GB 05

1.3 Recommendations

Aftereach use of the oven,a minimum of cleaning will help keep the ovenperfectlyclean.

Do not line the oven walls with aluminium foilor single-use protection available from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishesand baking moulds resistant tovery high temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor suchharm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internalparts. Makethe openings specified on lastpage accordingto the typeof fitting.

NOTE: As the oven could require maintenance work, it is advisable to keepanother wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is importantthatthe WEEE undergospecific treatments to correctly remove and

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a fewbasic rules:

- The WEEEshould not be treated as domestic waste;

- The WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as theappliance is of an equivalenttype and has thesamefunctions as the purchasedappliance.

SAVING AND RESPECTINGTHE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residualheat that the oven continues to generate. Keepthe seals clean and in order, toavoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtarifftime slot.

1.6 Declaration of compliance

The parts of this appliance thatmay comeinto contact with foodstuffs complywith the provisionsof EEC

Directive89/109.

By placing the mark on this product,we are confirmingcompliance to all relevant Europeansafety,

health and environmental requirements which areapplicablein legislation for this product.

GB 06

2. Product Description

2.1 Overview

2.2 Accessories (According to model)

Metal grill

Drip pan

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foods on the grills.

GB 07

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Meat probe

7. Oven door

Led vision

Is an illumination system which replaces the

traditional « light bulb ». 14 LED (for non-pyrolitic

versions) or 10 High Power LED (for pyrolitic

versions) lights are integrated within the door.

These produce white high quality illumination

which enables to view the inside of the oven with

clarity withoutany shadowson all the shelves.

Advantages:

This system, besides providing excellent illumination

inside the oven, lasts longer than the traditional light

bulb its easier and to maintain and most of all saves

energy.

-Optimum view

-Long life illumination

-Very low energy consumption,-95% in comparison

with the traditional illumination High.

GB 08

2.3 First Use

PRELIMINARYCLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

3. Use of the Oven

3.1 Display description

Cooking

duration

Cooking

end

Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cookingduration andend of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra.From theExtra key, the followingfunctions canbe set:

GB 09

FUNCTION HOW TO ACTIVATE

HOW TO

DEACTIVATE

WHAT IT DOES WHY IT IS NEEDED

COOKING

DURATION

NB: can only be set with an

activecookingprogramme.

PressEXTRAtwiceand set

the time using the “+” and

“-” keys, confirming by

pressing"SELECT".

The displayshows“00:00”

if no cooking durationhas

been inserted, otherwise

the displayshowsthetime

remaining.

•To modify cooking before

the set time, press EXTRA

twice and regulate the

cooking time as required

using the “<” and “>”

keys, before pressing

SELECT" once more.

•To cancel the cooking

duration, reset the display

to “00:00”.

When a cooking programme

terminates , the oven

switches off while the display

shows "END" (the cooking

programme icon remains on)

until the On/Off button, the

only functioning key, is

pressed. When a c o o k i n g p

r o g r amme terminates, an

alarm will sound.

When the cooking time has

finished,theoven

automatically switches off

and the alarm sounds for a

fewseconds.

NB: can only be set with an

active cooking programme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automatically calculated.

END OF

COOKING

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cookingiconsareilluminated.

•If a cooking programme is set,

by pressing the “<” and “>” keys

you can see and modify the

temperature set: at the first t o

uch,theoperating

temperature is shown while

another touch will allow you to

modify said temperature.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

displayto“00:00”.

TIMER

•To modify the timer, press

EXTRA enough times to

illuminate the icon,

regulate the cookingtime

as required using the “<”

and “>” keysandconfirm

by pressing"SELECT".

•This function activatesan

alarm that sounds for a few

secondswhen the set time

expires(thisfunctiondoes

not switchthe ovenoff).

You can select a time

between00:00and 23:59.

• The display shows

“00:00” if no time has been

inserted or the time

remaining if this has

alreadybeenset.

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressingSELECT.

•Thetimerfunctions

regardless of whether the

ovenis switchedon.

SETTING

THE CLOCK

•The alarm functions

regardless of whether the

oven is switched on.

•Switched on for the ﬁrst

time, the display

illuminates and sh

ows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, conﬁrming it by

pressing SELECT.

•It allows you to set the

time that appears on the

display.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

activate this function: the

display will show ON; to

conﬁrm press SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

deactivate this function:

the display will show OFF;

to conﬁrm press SELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

CHILD

SAFETY

LOCK

When a cooking

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key,is pressed.

When a cooking

programme terminates, an

alarm will sound.

GB 10

Pressing"Extra"on the timer display allows you to select the Wi-

Fi menu.In the Wi-Fimenu if youpress the "< >" buttons youcan select:

- Off:Wi-Fi is off;the ovenis not controllablevia the app.

- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switched on via the app.

- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled

before thisis possible.

If Wi-Fiis not configured it is only possible to choose betweenoffand reset.

When the oven is connectedto Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by

the user.

Wi-Fi Enrolment:

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutesto complete the enrolment process.

Wi-Fi icon

- Iconnot lit:Wi-Fi is off.

- Iconblinks 1 second on an 1second off:the oven is accessible to yourWi-Fi networkand ready to be enrolled.

If theenrolmenthas not beensuccessful, theWi-Fi icon will switch off after5 minutes.

- Iconis permanentlylit: the oven is connected toyour Wi-Firouter.

- Theicon blinks3 secondson and 1second off:the ovenis trying to connectto yourWi-Fi router.

- Theicon blinks1 secondon and 3seconds off: theoven isin readonly mode.

WiFi (depends on the oven model)

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttonssimultaneously and for 3". The currentlanguage is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languagesare: Italian,English, French and German.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

Bychanging menu, any unconfirmedselection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the display showsthecurrent timealternating with the message“HOT” at 3 intervals.

CANDY SIMPLY-FI:

For detailed information about HOW TO CONNECT your simply-Fi appliance and

HOW TO USE it at its best, go to or visit the dedicatedhttp://www.candysimplyfi.com

simply-Fi Customer Service website http://simplyfiservice.candy-hoover.com

GB 11

T °C

default

220

210

180

210

T °C

range

40 ÷ 40

50 ÷ 280

50 ÷ 230

50 ÷ 240

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

FAN COOKING: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives evenheat distribution and the smells arenot mixed.

Allow about tenminutes extrawhen cookingfoodsatthe sametime.

CONVENTIONAL COOKING: Both top and bottom heating elements are used.

Preheat the oven for about ten minutes. This method is ideal for all traditional

roasting and baking.For seizing red meats, roast beef, leg of lamb, game,bread,

foilwrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf

in mid position.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so thatit defrosts in a few minutes without

the proteincontentof the foodbeing changed oraltered.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

3.2 Cooking Modes

FAN + LOWER ELEMENT: The bottom heating element is used with the fan

circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottom position.

L1 ÷ L5

GRILL: Use the grill with the door closed.

The top heatingelement is usedalone andyou can adjustthe temperature.Five

minutes preheating is required to get the elements red-hot. Success is

guaranteed for grills, kebabs and gratin dishes. White meats should be put at a

distance from the grill; the cooking time is longer, but the meat will be tastier.

You can put red meats and fish fillets on the shelf with the drip tray underneath.

The oven hastwo grill positions:

Grill: 2140 W Barbecue: 3340 W

200 150 ÷ 220

FAN ASSISTED GRILL: Usethe turbo-grillwith the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking

thick food items, whole pieces such as roastpork, poultry, etc. Place the food to

be grilled directly on the shelf centrally, at the middle level. Slide the drip tray

under the shelf to collect the juices. Make sure that the food is not too close to

the grill. Turn the food over halfwaythrough cooking.

BOTTOM: Using the lower element. Ideal for cooking all pastry based dishes. Use

this for flans, quiches, tarts, pate and any cooking that needs more heat from below.

210 50 ÷ 230

The " " function allows you to cook in a healthier way, by reducing the amount ofECO

fat or oil required. Thanks to the use of the grill and fan combined with a pulsating

cycle of air, it will retain the moisture content of the food, grilling the surface and

using a shorter cookingtime,without compromisingon taste.

It is particularly suitable for cooking meat, roasted vegetables and omelettes. The

cycle of pulsed air keeps the humidity inside the oven and the moisture content of

the food, preserving the nutritional values and ensuring a rapid uniform cooking

process.

Try all your recipes and reduce the amount of dressing you usually use and

experiencethe lightness of thisnew function!

180 150 ÷ 220

GB 12

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliancecan be extendedthrough regular cleaning. Waitforthe oven tocool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

OVENWINDOW SEAL

If dirty, theseal can be cleaned witha slightly damp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

DRIP PAN

After using the grill, removethe pan fromthe oven.Pour the hot fat intoa container and wash the pan in

hot water, usinga sponge and washing-upliquid.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercial oven detergent.Neverput a dirty pan backinto the oven.

4.2 Maintenance

REMOVAL AND CLEANINGOF THE SIDE RACKS

1. Unscrewthe bolt in an anti-clockwisedirection.

2. Remove the side racks by pullingthem towardsyou.

3. Clean theside racksin a dishwasher orwith a wet spongeandthen dry them immediately.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully

tightened.

REMOVAL OF THE OVENWINDOW

1. Open thefront window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replacethe window bycarrying out the procedure in reverse.

LOW-E

REMOVAL AND CLEANINGOF THE GLASS DOOR

1. Open theoven door.

2.3.4. Lock thehinges, removethe screwsand removethe upper metal cover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolyticovens, also removethe

secondand third glass (ifpresent)).

7. At the end of cleaning orsubstitution, reassemblethe parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-hand lateral hinge.In this way,the printedlabel of the firstglass will be inside thedoor.

GB 13

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

GB 14

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

• ATTENTION: l'appareil et les parties accessibles deviennent chauds

pendantl'utilisation.Veillez à ne pas toucherles élements chauffants.

• MISE EN GARDE: les parties accessibles peuvent devenir chaudes lorsque

le gril est en cours d'utilisation. Les enfants doivent être maintenus à une

distance de sécurité.

• ATTENTION: le four doit éteint avant de changer l'ampoule, deêtre

manièreà éviter toutrisque de .choc électrique

•ATTENTION: pour éviter tout danger dû à une réinitialisation

accidentelle, cet appareil ne doit pas être alimenté par un dispositif de

commutation externe, comme une minuterie, ou connecté à un circuit

qui est régulièrement allumé et éteint par .l'utilisateur

• ATTENTION: avant d’activer la fonction de nettoyageautomatique:

- Nettoyer la porte du four

- Enlever avec une éponge humide les résidus les plus gros. Ne pas utiliser

de détergents;

- Sortir tous les accessoires ainsi que le kit éventuel de glissières coulissantes;

- Ne pas placer de torchonsou de maniques sur la poignée du four.

• Dans les fours avec sonde à viande, il est nécessaire, avant d'effectuer

le cycle de nettoyage de refermer l'embout avec l'écrou fourni.

Refermer toujours le trou avec l'écrou lorsque la sonde de viande n'est

pas utilise .

• Les enfants de moins de 8 ans doivent être tenus à l'écart à moins

d'êtresurveillés continuellement.

• Les enfants ne doivent pas jouer avec l'appareil. Cet appareil n'est pas

destiné à être utilisé par des personnes (y compris les enfants) dont les

capacités physiques, sensorielles ou mentales sont réduites, ou ayant

un manque d'expérience et de connaissances, à moins qu'elles n'aient

été formées à l'utilisation de l'appareil, par une personne responsable

de leur sécurité.

• Le nettoyage et entretien ne doivent pas être effectués par des enfants

sans surveillance.

• Ne pas utiliser de matériaux rêches, abrasifs, ou de racloirs métalliques

tranchants pour nettoyer les portes en verre du four car ils peuvent rayer

la surfaceentrainant des risques d'exposions.

FR 15

Conseils De Securite

•Le four doit être éteint avant le démontage des accessoires. Après

nettoyage, remonter les accessoiresen suivant les instructions.

• Utilisez uniquementla sonde thermique recommandée pour ce four.

• Ne pas utiliser un nettoyeur à vapeur.

• Brancher la fiche dans une prise de courant équipée d’un troisième

contact correspondant à la prise de terre. Monter sur le fil une prise

normalisée capable de supporter la charge indiquée sur la plaquette. Le

fil conducteur de masse à la terre est identifié par les couleurs jaune et

vert. Veiller à ce que votre installation soit capable de supporter toute la

puissance absorbée par le four. Si votre installation électrique n’est pas

conforme faites la modifier par un électricien afin de prévenir tous

risques. On peut également effectuer le branchement au réseau en

interposant entre l’appareil et le réseau un interrupteur omnipolaire

dimensionnée en fonction de la charge et conforme aux normes en

vigueur. Le fil de terre jaune et vert ne doit pas être interrompu par

l’interrupteur. La prise et l’interrupteur omnipolaire utilisés doivent

êtrefacilement accessibles une fois l’appareil électroménagerinstallé.

• Si le cordon d'alimentation est endommagé, il doit être remplacé par

un cordon spécial disponible auprès du fabricant ou des stations de

dépannageagrées.

Si le câble est endommagé, remplacez-le rapidement en conformité

avec les indications suivantes:

- Ouvrir le couvercle de la boîte à bornes;

- Retirer le câble d'alimentation et le remplacer par un câble similaire

adaptéeà l'appareil (type , H05V2V2-F).H05VV-F

• Cette opération doit être effectuée par du personnel qualifié. Le

conducteur de terre (jaune-vert) doit être environ 10 mm plus long que

les conducteurs de ligne. Pour toute réparation, reportez-vous

seulement à un centre de service technique agréé et demandez

l'utilisationde pièces de rechanged'origine.

• Le non respect de ce qui précède peut compromettre la sécurité de

l'appareil.

• Tout excédent de produit déversédoit être enlevé avant de le nettoyer.

• Pendant la pyrolyse, les surfaces peuvent chauffer plus que d'habitude:

les enfants doivent donc être maintenus à une distance de sécurité.

FR 16

SOMMAIRE

FR 17

Instructions Générales

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

4.1 Remarques générales concernant

le nettoyage

4.2 Entretien

• Retrait et nettoyage des gradins fils

• Retrait de la porte du four

• Retrait et nettoyage des vitres

Nettoyage du four et

maintenance

5.1 F.A.Q.

Dépannage

1. Instructions générales

Nous vous remercions d'avoir choisi un de nos produits.

Pourobtenir les meilleurs résultats avec votre four, vous

devezlire attentivement ce manuel et le conserverpour

toute consultation ultérieure. Avant d'installer le four,

notez le numéro de série, il vous sera demandé par le

support technique si des réparations sont nécessaires.

Après avoir enlevé le four de son emballage, vérifiez

qu'il n'a pas été endommagé pendant le transport. Si

vous avez des doutes, ne pas utiliser le four et se référer

à un technicien qualifié pour obtenir des conseils.

Conservez tous les matériaux d'emballage (sacs en

plastique, polystyrène, clous) hors de la portée des

enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre

provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce

phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline

toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas

respectées.

REMARQUE: Les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier

selon les modèles.

1.1 Indications de sécurité

Utilisez uniquement le fourà sa destination, qui est seulementpour la cuisson des aliments; toute autre

utilisation, par exemple comme une source de chaleur, est considérée comme inapproprié et donc

dangereuse.Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaise utilisation

ou a desmodifications techniquesdu produit.

L'utilisationde tout appareilélectrique implique le respectde certaines règlesfondamentales:

- Ne pastirer sur le fil électriquepour débrancher laprise.

- Ne pastoucher l'appareil avec les mains oules pieds mouillés ou humides;

- En général l'utilisationd'adaptateurs, de prises multiples etde rallongesest déconseillé;

- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y

toucher.

1.2 Sécurité électrique

LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN

TECHNICIENDE E.QUALIFICATION SIMILAIR

L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le

pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non

respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale

reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur

dans le pays d'installation.L'alimentationélectrique doit être protégée par des fusibles appropriés et les

câblesutilisés doivent avoir une section transversalequi peut assurerune alimentationnormale du four.

CONNEXION

Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique

de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir

vérifié:

- La tensiond'alimentationindiquée sur le compteur;

- Le réglage du disjoncteur.

Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne

Terrede l’installation.

FR 18

1.3 Recommandations

Après chaque utilisation du four, réaliser un petit entretien qui favorisera le nettoyage parfait du four.

Ne pas tapisser les parois du four avec des feuilles en aluminium ou des protections jetables du

commerce. La feuille d'aluminium ou toute autre protection, en contact direct avec l'émail chauffé,

risque de fondre et de détériorer l'émail du moufle. Avant installation de l'appareil, il faut relever le

numérode série et le noterci-dessous en cas d'éventuelledemande d'intervention.

Afin d'éviter les salissures excessives de votre four ainsi que les fortes odeurs de fumée pouvant en

résulter, nous recommandonsde ne pas utiliserle four àtrop forte température. Il estpréférablede

rallonger le temps de cuisson et de baisser la température. Nous vous conseillons de n'utiliser que des

plats,des moules à pâtisserie résistantsà de très hautestempératures.

1.4 Installation

La mise en service de l’appareil est à la charge de l’acheteur, le constructeur est dégagé de ce service.

Les pannes liées à une mauvaise installation ne seront pas couvertes par la garantie. Une mauvaise

installation peut provoquer des dommages aux personnes, aux animaux domestiques; dans ce cas la

responsabilité du constructeur ne peut être engagée. L'installation du four doit être réalisée par un

installateur agréé ou un technicien de qualification similaire. Le four peut être placé en hauteur dans

une colonne ou enchâssé sous un plan de travail. Avant sa fixation: il est indispensable d'assurer une

bonne aération dans la niche d'encastrement afin de permettre la bonne circulation de l'air frais

nécessaire au refroidissement et à la protection des organes intérieurs. Pour cela, réaliser les

ouverturesspécifiées selon le typed'encastrement(dernière page).

ATTENTION

Faire vérifier la continuité de la terre de l’installation avant de procéder au raccordement. Le fabricant

décline toute responsabilité en cas d'accidents ou d'autres problèmes qui pourraient survenir à l'usage

d'un appareilnon reliéàla terre, ourelié à une terre dont lacontinuité seraitdéfectueuse.

REMARQUE: Le four peut nécessiter une opération de S.A.V. Aussi, placez la prise de courant de façon à

pouvoir brancher le four une fois sorti de sa niche. Câble d'alimentation: si le changement du câble

d'alimentation s'avère nécessaire, nous vous demandons de faire réaliser cette opération par le service

après-venteouune personne dequalification similaire.

1.5 La gestion des déchets et la protection de l'environnement

Le présent appareil est marqué conformément à la directive 2012/19/UE relative aux

déchets d'équipementsélectriques et électroniques

(DEEE). Les DEEE contiennent à la fois des substances polluantes (qui peuvent avoir des

conséquences négatives sur l'environnement) et des éléments de base (réutilisables). Il est

important de soumettre les DEEE à des traitements spécifiques, en vue d'extraire et

d'éliminer de façon appropriée toutes les substances polluantes, puis de récupérer et

recyclertous les matériaux.

Chacun peut jouer un rôle important quant à la protection de l'environnement contre les DEEE. Pour

atteindre cet objectif, ilest impératifde suivre quelquesrègles élémentaires :

• Les DEEEne doivent pas êtretraitéscomme des déchetsménagers.

• Ils doivent être remis aux points de collecte appropriés gérés par la municipalité ou par des sociétés

immatriculées.Dans plusieurs pays, il estpossible de collecterà domicile les DEEE volumineux.

• Lorsque vous achetez un nouvel appareil, vous devez retourner l'ancien au vendeur qui le récupère

gratuitement, au cas par cas, à condition que l'équipement soit de type équivalent et possède les

mêmes fonctions que celui fourni.

FR 19

1.6 Declaration De Conformité

Les parties de cet appareil pouvant être en contact avec des substances alimentaires sont conformes à

la prescriptionde la Dir. CEE 89/109.

En utilisantle symbol sur ce produit,nous déclarons surnotre propreresponsabilité que ce produit

estconformeà toutes lesnormes Européennes relatives à la sécurité,la santéet à l’environnement.

2. Description du produit

2.1. Vue d'ensemble

1. Panneau de commande

2. Positions des gradins

(gradins fils si inclus)

3. Grille métalique

4. Léchefrite

5. Ventilateur

(derrière la plaque d'acier)

6. Sonde à viande

7. Porte du four

ÉCONOMIE ET RESPECT DE L'ENVIRONNEMENT

FR 20

Lorsque cela est possible, éviter le préchauffage du four et éviter de le faire tourner à vide. N'ouvrez la

porte du four que lorsque cela estnécessaire, car il y a des déperditions de chaleur à chaque fois qu'il est

ouvert. Pour une économie d'énergie significative, éteindre le four entre 5 et 10 minutes avant la fin de

cuisson prévue, et utiliser la chaleur que le fourcontinue de générer. Gardez les joints propres et en bon

état, pour éviter toute déperdition d'énergie. Si vous avez un contrat électrique avec un tarif heure

creuse, le programme "cuisson différée" peut vous faire réaliser des économies d'énergie en déplaçant

le début duprogrammeà un intervallede temps à tarifréduit.

2.2. Accessories (Par modele)

Grille métalique

La grille métalique sert de support aux plats.

Léchefrite

Recueille les résidus suintent au cours de la

cuisson des alimentssur les grilles.

La pagina sta caricando ...

Candy FCXE818XWIFI/E Manuale utente

Marca: Candy

Modello: FCXE818XWIFI/E

Categoria: Microonde

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

Candy FCXE818XWIFI/E Manuale utente

Questo manuale è adatto anche per

Candy FCXE818XWIFI/E Manuale utente

Documenti correlati

Altri documenti