Beninca Bull 24CB Guida utente

Tipo
Guida utente
BULL 24CB
Il kit è composto da una scheda carica-
batteria CB.24V e da due batterie da 12V/
1,2Ah ricaricabili, che possono essere
ssate sul retro del contenitore centrale
(Fig.2).
La scheda CB.24V deve essere collegata
tra il secondario del trasformatore e gli in-
gressi 0/SLOW/24V/FAST, come indicato
nello schema di Fig.1.
Durante il normale funzionamento di rete
il LED verde DL2 è accesso e la scheda
provvede al mantenimento della carica
delle batterie.
Nel caso di assenza di rete la scheda for-
nisce alimentazione attraverso le batterie,
il LED rosso DL1 si accende.
Un fusibile F10A protegge la centrale
durante il funzionamento con batteria di
emergenza.
In assenza di rete e con batterie scariche
entrambi i LED sono spenti.
La batteria tampone funziona no a che,
scaricandosi progressivamente, non rag-
giunge il valore di 18V, al raggiungimento
di questo valore la batteria viene scolle-
gata.
Durante il funzionamento in assenza di
rete, l’uscita accessori 24Vac della cen-
trale, risulta polarizzata.
ATTENZIONE!
Durante il funzionamento in assenza
di rete, l’uscita accessori 24Vac della
centrale, risulta polarizzata.
E’ indispensabile verificare il corretto
collegamento degli accessori, come
riportato nel manuale istruzioni della
centrale di comando.
4
5
BULL 24CB
The kit is composed of CB.24V battery
charge card and two rechargeable bat-
teries at 12V/1,2Ah, which can be tted
on the back on the control unit container
(Fig.2).
The CB.24V card must be connected be-
tween the secondary transformer and the
0/SLOW/24V/FAST inputs, as shown in
the diagram of Fig.1.
During mains powered operation, the DL2
green LED is switched on and the card
maintains the battery charged.
If no mains power is available, the card
powers the system through batteries, the
DL1 red LED switches on.
A F10A fuse protects the control unit dur-
ing operation with an emergency battery.
If no main power is available and batteries
are down, both LED’s are switched.
The buffer battery works and progres-
sively runs down until it reaches the value
of 18V. When this value is reached, the
battery is disconnected.
WARNING!
When operating without the mains power,
the 24Vac accessory output of the control
unit becomes a 24Vdc polarised current.
The connections of the accessories
must be checked and comply with the
control unit instruction manual.
1 / 1