Maytag 3RMED4905TW2 Use & Care Manual Installation Instructions

ELECTRIC DRYER

USE & CARE GUIDE/INSTALLATION INSTRUCTIONS

SECADORA ELÉCTRICA

MANUAL DE USO Y CUIDADO/INSTRUCCIONES DE INSTALACIÓN

SECHE-LINGE ELECTRIQUE

GUIDE D’UTILISATION ET D’ENTRETIEN/INSTRUCTIONS D'INSTALLATION

ASCIUGATRICE ELETTRICA

ISTRUZIONI PER L’USO E LA MANUTENZIONE/ISTRUZIONI DI INSTALLAZIONE

W10127856B

2

TABLE OF CONTENTS

DRYER SAFETY..........................................................................................................................4

DRYER DISPOSAL..................................................................................................................... 6

INSTALLATION INSTRUCTIONS .............................................................................................7

Tools and Parts.......................................................................................................................7

Location Requirements ..........................................................................................................7

Electrical Requirements.......................................................................................................... 9

Venting Requirements............................................................................................................9

Plan Vent System..................................................................................................................11

Install Vent System ...............................................................................................................12

Install Leveling Legs .............................................................................................................13

Connect Vent .......................................................................................................................13

Level Dryer ..........................................................................................................................13

Reverse Door Swing (Optional)............................................................................................13

Complete Installation ...........................................................................................................14

DRYER USE..............................................................................................................................15

Starting Your Dryer...............................................................................................................15

Drying, Cycle and Temperature Tips....................................................................................16

Dryer Symbols......................................................................................................................16

Cycles ..................................................................................................................................17

DRYER CARE...........................................................................................................................18

Cleaning the Dryer Location ................................................................................................18

Cleaning the Lint Screen ......................................................................................................18

Cleaning the Dryer Interior...................................................................................................18

Removing Accumulated Lint................................................................................................19

Vacation and Moving Care ..................................................................................................19

TROUBLESHOOTING.............................................................................................................20

ASSISTANCE OR SERVICE.......................................................................................................21

ÍNDICE

SEGURIDAD DE LA SECADORA ............................................................................................22

ELIMINACIÓN DE LA SECADORA .........................................................................................24

INSTRUCCIONES DE INSTALACIÓN.....................................................................................24

Herramientas y piezas..........................................................................................................24

Requisitos de ubicación .......................................................................................................25

Requisitos eléctricos.............................................................................................................26

Requisitos de ventilación .....................................................................................................27

Planificación del sistema de ventilación...............................................................................29

Instalación del sistema de ventilación..................................................................................30

Instalación de las patas niveladoras......................................................................................31

Conexión del conducto de escape .......................................................................................31

Nivelación de la secadora....................................................................................................31

Cómo invertir el sentido de apertura de la puerta (opcional)................................................31

Complete la instalación........................................................................................................32

USO DE LA SECADORA..........................................................................................................33

Puesta en marcha de su secadora.........................................................................................33

Consejos para secado, ciclos y temperatura.........................................................................34

Símbolos de la secadora.......................................................................................................34

Ciclos...................................................................................................................................35

CUIDADO DE LA SECADORA................................................................................................36

Limpieza del lugar donde está la secadora...........................................................................36

Limpieza del filtro de pelusa ................................................................................................36

Limpieza del interior de la secadora ....................................................................................37

Eliminación de pelusa acumulada........................................................................................37

Cuidado para las vacaciones y la mudanza .........................................................................37

SOLUCIÓN DE PROBLEMAS..................................................................................................37

AYUDA O SERVICIO TÉCNICO .............................................................................................39

3

TABLE DES MATIERES

SECURITE DU SECHE-LINGE.................................................................................................. 40

MISE AU REBUT DU SECHE-LINGE ....................................................................................... 42

INSTRUCTIONS D'INSTALLATION ....................................................................................... 42

Outillage et pièces............................................................................................................... 42

Exigences d’emplacement.................................................................................................... 43

Spécifications électriques..................................................................................................... 44

Exigences concernant l'évacuation ...................................................................................... 45

Planification du système d’évacuation ................................................................................. 46

Installation du système d’évacuation.................................................................................... 48

Installation des pieds de nivellement ................................................................................... 48

Raccordement du conduit d’évacuation .............................................................................. 49

Mise à niveau du sèche-linge............................................................................................... 49

Inversion du sens d'ouverture de la porte (facultatif)............................................................ 49

Achever l’installation ........................................................................................................... 50

UTILISATION DE LA SÉCHEUSE ............................................................................................ 51

Mise en marche du sèche-linge ........................................................................................... 51

Conseils pour séchage, programmes et température............................................................ 52

Symboles du sèche-linge...................................................................................................... 52

Description des programmes ............................................................................................... 53

ENTRETIEN DU SÈCHE-LINGE ............................................................................................... 54

Nettoyage de l'emplacement du sèche-linge ....................................................................... 54

Nettoyage du filtre à charpie................................................................................................ 54

Nettoyage de l’intérieur du sèche-linge ............................................................................... 55

Enlever la charpie accumulée.............................................................................................. 55

Précautions à prendre pour les vacances et avant un déménagement.................................. 55

DEPANNAGE .......................................................................................................................... 55

ASSISTANCE OU REPARATION............................................................................................. 57

INDICE

SICUREZZA DELL'ASCIUGATRICE......................................................................................... 58

SMALTIMENTO DELL'ASCIUGATRICE .................................................................................. 60

ISTRUZIONI INSTALLAZIONE............................................................................................... 61

Attrezzi e Pezzi.................................................................................................................... 61

Esigenze di Collocazione..................................................................................................... 61

Requisiti Elettrici .................................................................................................................. 63

Requisiti Evacuazione.......................................................................................................... 64

Schema Sistema di Scarico................................................................................................... 65

Installazione sistema di evacuazione................................................................................... 67

Installare i piedini di livellamento........................................................................................ 67

Allacciatura Sfiatatoio.......................................................................................................... 67

Posizionamento Asciugatrice............................................................................................... 67

Invertire l’apertura dello sportello di Carico (Opzionale)..................................................... 68

Termine Installazione...........................................................................................................68

USO DELL’ASCIUGATRICE .................................................................................................... 69

Avvio dell'Asciugatrice ........................................................................................................ 69

Consigli per Asciugatura, Cicli e Temperature ..................................................................... 70

Simboli dell'Asciugatrice ..................................................................................................... 70

Cicli ..................................................................................................................................... 71

CURA DELL'ASCIUGATRICE.................................................................................................. 72

Pulire l'area intorno all'asciugatrice..................................................................................... 72

Pulire il Filtro per Pelucchi...................................................................................................72

Pulizia all'interno dell'asciugatrice ...................................................................................... 73

Rimozione Pelucchi Accumulati.......................................................................................... 73

Precauzioni Assenze o Traslochi.......................................................................................... 73

MALFUNZIONAMENTO ........................................................................................................ 74

ASSISTENZA O MANUTENZIONE ......................................................................................... 75

4

DRYER SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

WARNING:

SAVE THESE INSTRUCTIONS

■

Read all instructions before using the dryer.

■

Keep a minimum clearance of 10 cm (4 in.) between the

rear of the dryer and any wall.

■

The operation of this appliance may affect the operation of

other types of appliances which take their air supply for

safe combustion from the same room. There has to be

adequate ventilation to replace exhausted air and thus

avoid the back-flow of gases into the room from

appliances burning other fuels, including open fires, when

operating the tumble dryer. If in doubt, consult the

appliance manufacturers.

■

Do not obstruct the air supply to the dryer (see Installation

Instructions for minimum clearances).

■

Do not place items exposed to cooking oils in your dryer.

Oil-affected items can ignite spontaneously, especially

when exposed to heat sources such as in a tumble dryer.

The items become warm causing an oxidation reaction in

the oil. Oxidation creates heat. If the heat cannot escape,

the items can become hot enough to catch fire. Piling,

stacking or storing oil-affected items can prevent heat from

escaping and so create a fire hazard.

5

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■

If it is unavoidable to dry in the dryer items that have been

soiled with substances such as cooking oil, acetone,

alcohol, petrol, kerosene, spot removers, turpentine, waxes

and wax removers, or that have been contaminated by hair

care products, should be washed in hot water with an extra

amount of detergent before being dried in the dryer. These

items may give off vapours that could ignite or explode.

Such washing will reduce, but not eliminate, the hazard.

■

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instructions concerning

use of the appliance by persons responsible for their safety.

■

Children should be supervised to ensure that they do not

play with the appliance.

■

The dryer should not be used if industrial chemicals have

been used for cleaning.

■

Before the dryer is removed from service or discarded,

remove the doors to the drying compartment.

■

Do not reach into the dryer if the drum is moving. A door

switch is fitted for your safety.

■

Do not install or store the dryer where it will be exposed to

the weather.

■

Do not tamper with controls.

■

Do not continue to use this appliance if it appears to be

faulty.

■

Do not repair or replace any part of the dryer or attempt

any maintenance unless specifically recommended in this

Use and Care Guide. Repairs and servicing should only be

carried out by competent service personnel.

■

Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric

softener or product. Follow their instructions.

■

Clean dryer lint screen before or after each load. Do not

operate dryer without lint screen in place.

■

Keep area around the exhaust and inlet openings and

adjacent surrounding areas free from the accumulation of

lint, dust, and dirt.

■

The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

■

See Installation Instructions for earthing instructions.

■

Do not dry unwashed items in this dryer.

■

Items such as foam rubber (latex foam), shower caps,

waterproof textiles, rubber backed articles and clothes or

pillows fitted with foam rubber pads should only be dried

using the Air Fluff (no heat) cycle.

■

The final part of a tumble dryer cycle occurs without heat

(cool down cycle) to ensure that the items are left at a

temperature that ensures the items will not be damaged.

WARNING:

Never stop a tumble dryer cycle before the

end of the drying cycle unless all items are quickly removed

and spread out so that the heat is dissipated.

6

DRYER DISPOSAL

This appliance is marked according to the European directive 2002/ 96/ EC on Waste Electrical and Electronic Equipment

(WEEE).

By ensuring this product is disposed of correctly, you will help avoid potential negative consequences for the environment and

human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as

household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic

equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

7

INSTALLATION INSTRUCTIONS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the

instructions provided with any tools listed here.

Parts supplied

Remove parts packages from dryer drum. Check that all parts are included.

4 Leveling legs

Parts needed

Check local codes. Check existing electrical supply and venting. See “Electrical

Requirements” and “Venting Requirements” before purchasing parts.

Location Requirements

You will need

■ A location that allows for proper exhaust installation. See “Venting Requirements.”

■ A separate 16-amp circuit.

■ A sturdy floor to support the total weight (dryer and load) of 90.7 kg (200 lbs). The

combined weight of a companion appliance should also be considered.

■ A level floor with a maximum slope of 2.5 cm (1") under entire dryer. (If slope is greater

than 2.5 cm [1"], install Extended Dryer Feet kit, Part Number 279810.) Clothes may not

tumble properly and models with automatic sensor cycles may not operate correctly if

dryer is not level.

Do not operate your dryer at temperatures below 7ºC (45ºF). At lower temperatures, the dryer

might not shut off at the end of an automatic cycle. Drying times can be extended.

The dryer must not be installed or stored in an area where it will be exposed to water and/or

weather.

Check code requirements. Some codes limit, or do not permit, installation of the dryer in

garages, closets, mobile homes or sleeping quarters. Contact your local building inspector.

■ Flat-blade screwdriver

■ #2 Phillips screwdriver

■ Adjustable wrench that opens to

2.54 cm (1") or hex-head socket

wrench (for adjusting dryer feet)

■ Tin snips (new vent installations)

■ Level

■ Vent clamps

■ Caulking gun and compound (for

installing new exhaust vent)

■ Tape measure

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as petrol,

away from dryer.

Place dryer at least 46 cm (18 inches) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

8

Installation Clearances

The location must be large enough to allow the dryer door to open fully.

Dryer Dimensions

*Most installations require a minimum 12.7 cm (5") clearance behind the dryer for the

exhaust vent with elbow. See “Venting Requirements.”

Exhaust dimensions

Installation spacing for recessed area or closet installation

The following spacing dimensions are recommended for this dryer. This dryer has been tested

for spacing of 0 cm (0") clearance on the sides and rear. Recommended spacing should be

considered for the following reasons:

■ Additional spacing should be considered for ease of installation and servicing.

■ Additional clearances might be required for wall, door and floor moldings.

■ Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

■ For closet installation, with a door, minimum ventilation openings in the top and bottom

of the door are required. Louvered doors with equivalent ventilation openings are

acceptable.

■ The dryer must not be installed behind a lockable door, a sliding door or a door with a

hinge on the opposite side to that of the dryer.

■ Companion appliance spacing should also be considered.

*Additional spacing recommended

A. Terminal block cover

B. Power supply cord/cable strain relief

A. Back exhaust

B. Left or right side exhaust

(43½")

110.5 cm

(29¼")

*74.3 cm

(27")

A

B

(11")

27.9 cm

(38¼")

97.2 cm

68.6 cm

(23³⁄₄")

60.3 cm

10.8 cm

(4¼")

26 cm

(10¼")

35.9 cm

(14¹/₈")

10.2 cm

(4")

A

B

A. Recessed area

B. Side view - closet or confined area

C. Closet door with vents

A

B

C

45.7 cm*

68.6 cm

74.3 cm

(14" max)

(3")

2.5 cm

(1")

12.7 cm

(5")

2.5 cm

(1")

(27") (29¼")

(18")

35.6

cm*

2

310 cm *

(155 in. )

2

24 cm *

7.6 cm*

(3")

2.5 cm*

(1")

(48 in. )

2

9

Electrical Requirements

This dryer is supplied without an electric cord and plug. It must be connected by a competent

electrician to a single-phase electricity supply at the voltage shown on the dataplate, using a

suitable fixed wiring installation in accordance with local and national wiring regulations.

NOTE: In accordance with the European EMC Directive (89/336/EEC) the maximum

electricity supply system impedence to which the electric dryer should be connected is

declared to be 0.302 Ohm + j0.189 Ohm.

■ A 3-wire circular cord of minimum conductor size 2.5 mm

2

(0.004 in.

2

) cross-section area

should be used.

■ A 16A supply fuse should be used, and a switch with a minimum contact separation of

3 mm in both poles must be incorporated into the fixed wiring for dryer disconnection.

The dryer should be positioned so that the disconnection switch is accessible to the user.

■ A cord clamp bush is provided on the dryer, and should be tightened on completion of

wiring. The electrical mains terminals are located behind the small rear access panel

(terminal block cover), and connections should be made in accordance with the terminal

markings. Remember to replace the terminal access panel (terminal block cover).

■ If codes permit and an additional earth bond wire is used, it is recommended that a

competent electrician determine that the earth bond path is adequate.

Venting Requirements

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a

concealed space of a building.

If using an existing vent system

■ Clean lint from the entire length of the system and make sure exhaust hood is not plugged

with lint.

■ Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

■ Review Vent system chart. Modify existing vent system if necessary to achieve the best

drying performance.

WARNING

Electric Shock Hazard

Electric earthing is required on this dryer.

Do not earth to a gas pipe.

Do not have a fuse in the neutral or earthing circuit.

Check with a qualified electrician to be sure the dryer is

properly earthed.

Do not reuse the old power supply mains cord.

Failure to follow these instructions could result in

death, fire, or serious injury.

EARTHING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This dryer must be earthed. In the event of malfunction or

breakdown, earthing will reduce the risk of electric shock by

providing a path of least resistance for electric current.

WARNING:

Improper connection of the equipment-

earthing conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative

or personnel if you are in doubt as to whether the dryer is

properly earthed.

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death

or fire.

10

If this is a new vent system

Vent material

■ Use a heavy metal vent. Do not use plastic or metal foil vent.

■ 10.2 cm (4") heavy metal exhaust vent and clamps must be used.

Vent products can be purchased from your dealer or by calling Maytag Services. For more

information, see the “Assistance or Service” section.

Rigid metal vent

■ For best drying performance, rigid metal vents are recommended.

■ Rigid metal vent is recommended to avoid crushing and kinking.

Flexible metal vent

■ Flexible metal vents are acceptable only if accessible for cleaning.

■ Flexible metal vent must be fully extended and supported when the dryer is in its final

location.

■ Remove excess flexible metal vent to avoid sagging and kinking that may result in

reduced airflow and poor performance.

■ Do not install flexible metal vent in enclosed walls, ceilings or floors.

Elbows

45° elbows provide better airflow than 90° elbows.

Clamps

■ Use clamps to seal all joints.

■ Exhaust vent must not be connected or secured with screws or other fastening devices

that extend into the interior of the duct. Do not use duct tape.

Exhaust

Recommended hood styles are shown here.

The angled hood style (shown here) is acceptable.

■ An exhaust hood should cap the vent to keep rodents and insects from entering the home.

■ Exhaust hood must be at least 30.5 cm (12") from the ground or any object that may be in

the path of the exhaust (such as flowers, rocks or bushes, snow line, etc.).

■ Do not use an exhaust hood with a magnetic latch.

10.2 cm (4") heavy metal exhaust vent

Good Better

10.2 cm

(4")

Clamp

A. Louvered hood style

B. Box hood style

10.2 cm

A

B

10.2 cm

(4")

10.2 cm

6.4 cm

(4")

Improper venting can cause moisture and lint to collect

indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wallpaper,

carpets, etc.

Housecleaning problems and health problems.

11

Plan Vent System

Choose your exhaust installation type

Recommended exhaust installations

Typical installations vent the dryer from the rear of the dryer. Other installations are possible.

Optional exhaust installations

This dryer can be converted to exhaust out the right side, left side, or through the bottom. If

you prefer, you may contact your local dealer to have the dryer converted.

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for your installation. Two close-

clearance installations are shown. Refer to the manufacturer’s instructions.

NOTE: The following kits for close clearance alternate installations are available for purchase.

To order, please see the “Assistance or Service” section.

■ Over-the-Top Installation:

Part Number 4396028

■ Periscope Installation (For use with dryer vent to wall vent mismatch):

Part Number 4396037 - 0 cm (0") to 45.72 cm (18") mismatch

Part Number 4396011 - 45.72 cm (18") to 73.66 cm (29") mismatch

Part Number 4396014 - 73.66 cm (29") to 127 cm (50") mismatch

A. Dryer

B. Elbow

C. Wall

D. Exhaust hood

E. Clamps

F. Rigid metal or flexible metal vent

G. Vent length necessary to connect elbows

H. Exhaust outlet

A

B

C

D

E

F

G

B

H

WARNING

Fire Hazard

Cover unused exhaust holes with the following kit:

279818 (white)

Contact your local dealer.

Failure to follow these instructions can result in death,

fire, electrical shock, or serious injury.

A. Standard rear offset exhaust installation

B. Left or right side exhaust installation

C. Bottom exhaust installation

A. Over-the-top installation (also available with one offset elbow)

B. Periscope installation

AB C

A

B

12

Special provisions for mobile home installations

The exhaust vent must be securely fastened to a noncombustible portion of the mobile home

structure and must not terminate beneath the mobile home. Terminate the exhaust vent

outside.

Determine vent path

■ Select the route that will provide the straightest and most direct path outdoors.

■ Plan the installation to use the fewest number of elbows and turns.

■ When using elbows or making turns, allow as much room as possible.

■ Bend vent gradually to avoid kinking.

■ Use the fewest 90° turns possible.

Determine vent length and elbows needed for best drying performance

■ Use the Vent system chart below to determine type of vent material and hood

combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in the Vent system chart. Exhaust

systems longer than those specified will:

■ Shorten the life of the dryer.

■ Reduce performance, resulting in longer drying times and increased energy usage.

The Vent system chart provides venting requirements that will help to achieve the best drying

performance.

Vent system chart

NOTE: Side and bottom exhaust installations have a 90º turn inside the dryer. To

determine maximum exhaust length, add one 90º turn to the chart.

Install Vent System

1. Install exhaust hood. Use caulking compound to seal exterior wall opening around

exhaust hood.

2. Connect vent to exhaust hood. Vent must fit inside exhaust hood. Secure vent to exhaust

hood with 10.2 cm (4") clamp.

3. Run vent to dryer location. Use the straightest path possible. See “Determine vent path” in

“Plan Vent System.” Avoid 90º turns. Use clamps to seal all joints. Do not use duct tape,

screws or other fastening devices that extend into the interior of the vent to secure vent.

Number of 90º

turns or elbows

Type of

vent

Box or louvered

hoods

Angled

hoods

0 Rigid metal

Flexible metal

20m (64 ft)

11m (36 ft)

17.7 m (58 ft)

8.5 m (28 ft)

1 Rigid metal

Flexible metal

16.5 m (54 ft)

9.4 m (31 ft)

14.6 m (48 ft)

7 m (23 ft)

2 Rigid metal

Flexible metal

13.4 m (44 ft)

8.2 m (27 ft)

11.6 m (38 ft)

5.8 m (19 ft)

3 Rigid metal

Flexible metal

10.7 m (35 ft)

7.6 m (25 ft)

8.8 m (29 ft)

5.2 m (17 ft)

4 Rigid metal

Flexible metal

8.2 m (27 ft)

7 m (23 ft)

6.4 m (21 ft)

4.6 m (15 ft)

13

Install Leveling Legs

1. To protect the floor, use a large, flat piece of cardboard from the dryer carton. Place

cardboard under the entire back side of the dryer.

2. Firmly grasp the body of the dryer (not the top or console panel). Gently lay the dryer on

the cardboard. See illustration.

3. Examine the leveling legs. Find the diamond marking.

4. Screw the legs into the leg holes by hand. Use a wrench to finish turning the legs until the

diamond marking is no longer visible.

5. Place a carton corner post from dryer packaging under each of the 2 dryer back corners.

Stand the dryer up. Slide the dryer on the corner posts until it is close to its final location.

Leave enough room to connect the exhaust vent.

Connect Vent

1. Using a 10.2 cm (4") clamp, connect vent to exhaust outlet in dryer. If connecting to

existing vent, make sure the vent is clean. The dryer vent must fit over the dryer exhaust

outlet and inside the exhaust hood. Check that the vent is secured to exhaust hood with a

10.2 cm (4") clamp.

2. Move dryer into its final location. Do not crush or kink vent.

3. Once the exhaust vent connection is made, remove the corner posts and cardboard.

Level Dryer

Check the levelness of the dryer. Check levelness first side to side, then front to back.

If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs

up or down and check again for levelness.

Reverse Door Swing (Optional)

You can change your door swing from a right-side opening to a left-side opening, if desired.

1. Place towel (A) on top of dryer to protect surface.

2. Open dryer door. Remove bottom screws from cabinet side of hinges (D). Loosen (do not

remove) top screws from cabinet side of hinges.

3. Lift door until top screws in cabinet are in large part of hinge slot. Pull door forward off

screws. Set door (handle side up) on top of dryer. Remove top screws from cabinet.

WARNING

Excessive Weight Hazard

Use two or more people to move and install dryer.

Failure to do so can result in back or other injury.

A

C

B

D

F

E

14

4. Remove screws attaching hinges to door.

5. Remove screws at top, bottom and side of door (4 screws). Holding door over towel on

dryer, grasp sides of outer door and gently lift to separate it from inner door. Do not pry

apart with putty knife. Do not pull on door seal or plastic door catches.

6. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel

to inner door panel so handle is on the side where hinges were just removed.

7. Attach door hinges to dryer door so that the larger hole is at the bottom of the hinge.

8. Remove door strike (E) from cabinet. Use a small, flat-blade screwdriver to gently remove

4 hinge hole plugs (F) on left side of cabinet. Insert plugs into hinge holes on right side of

cabinet.

9. Insert screws into bottom holes on left side of cabinet. Tighten screws halfway. Position

door so large end of door hinge slot is over screws. Slide door up so screws are in bottom

of slots. Tighten screws. Insert and tighten top screws in hinges.

10. Remove door strike plug (B). Insert the door strike you removed in Step 8 into hole and

secure with screw. Insert door strike plug into original door strike hole and secure with

screw.

11. Close door and check that door strike aligns with door catch (C). If it is needed, slide door

catch left or right within slot to adjust alignment.

Complete Installation

1. Check that all parts are now installed. If there is an extra part, go back through the steps to

see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check the dryer’s final location. Be sure the vent is not crushed or kinked.

5. Check that the dryer is level. See “Level Dryer.”

6. Turn on power.

7. Remove the blue protective film on the console and any tape remaining on the dryer.

8. Read “Dryer Use.”

9. Wipe the dryer drum interior thoroughly with a damp cloth to remove any dust.

10. Set the dryer on a full heat cycle (not an air cycle) for 20 minutes and start the dryer.

If the dryer will not start, check the following:

■ Controls are set in a running or “On” position.

■ Start button has been pushed firmly.

■ Electrical supply is on.

■ Household fuse is intact and tight, or circuit breaker has not tripped.

■ Dryer door is closed.

11. When the dryer has been running for 5 minutes, open the dryer door and feel for heat. If

you feel heat, cancel cycle and close the door.

If you do not feel heat, turn off the dryer and check the following:

■ Check that the fuse is intact and tight, or that the circuit breaker has not tripped. If the

problem continues, contact a qualified technician.

NOTE: You may notice a burning odor when the dryer is first heated. This odor is common

when the heating element is first used. The odor will go away.

15

DRYER USE

Starting Your Dryer

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

This book covers several different models. Your dryer may not have all of the cycles and

features described.

Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing

and shipping.

1. Clean lint screen before each load. See “Cleaning the Lint Screen.”

2. Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space

for clothes to tumble freely. Maximum dry clothes capacity: 9.0 kg (19.8 lbs).

3. Turn the Cycle Control knob to the recommended cycle for the type of load being dried.

4. If your dryer has a Temperature selector, set it to the recommended setting for the type of

fabric being dried. See “Cycles” for temperature suggestions. On some models,

temperature is included in the cycle selections.

5. (OPTIONAL) Your dryer may have a Crease Guard selector. When you are unable to

remove a load from the dryer as soon as it stops, wrinkles can form. This feature

periodically tumbles, rearranges and fluffs the load without heat to help smooth out

wrinkles.

6. (OPTIONAL) Your dryer may have an End of Cycle Signal. The signal is helpful when

drying items that should be removed from the dryer as soon as it stops.

■ On some models, the volume of the End of Cycle signal can be adjusted. Turn the

selector to the desired volume.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as petrol,

away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Fluff cycle.

Failure to follow these instructions can result in death

or fire.

16

■ On other models, the End of Cycle signal is part of the Start button and is selectable.

Turn the START button to ON or OFF. The signal will sound only if the selector is set

to On.

7. Select the desired Option. See “Cycles.”

8. If desired, add fabric softener sheet. Follow instructions on the package.

9. Push the START button.

How Automatic Drying Works

When moisture is left in the clothes, the Cycle Control knob will not advance. As clothes

begin to dry, the amount of water left in the clothes decreases, and the timer advances

through the remainder of the cycle. When the selected dryness level is reached, the dryer

goes into a cool down period of up to 10 minutes.

Stopping and Restarting

You can stop your dryer anytime during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Control knob to OFF.

NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use.

To restart your dryer

1. Close the door.

2. Select a new cycle and temperature (if desired).

3. Push the START button.

Drying, Cycle and Temperature Tips

Select the correct cycle and temperature for your load.

Cool Down tumbles the load without heat during the last few minutes of all cycles to make

the load easier to handle.

Drying tips

■ Follow care label directions when they are available.

■ If desired, add a fabric softener sheet. Follow package instructions.

■ Remove the load from the dryer as soon as tumbling stops, to reduce wrinkling. This is

especially important for permanent press, knits and synthetic fabrics.

Cycle and temperature tips

■ Use a High heat setting for drying heavyweight items such as towels and work clothes.

■ Use a Medium heat setting for drying medium-weight items such as sheets, underwear,

permanent press fabrics and some knits.

■ Use a Low heat setting for drying lightweight items such as lingerie, blouses, dresses and

some knits.

■ Use an Air Fluff (no heat) cycle for rubber, plastic or heat-sensitive fabrics.

■ Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care

label directions. If you are unsure of the temperature to select for a load, select a lower setting

rather than a higher setting.

Dryer Symbols

The control panel of your dryer contains symbols. Refer to the chart below for a definition of

those symbols.

Temperature Selector

Low Heat Medium Heat High Heat

Start Button

End of Cycle Signal Selector

End of Cycle Signal

Cycle Control Knob

Automatic Drying Cycles

Heavyweight Items Cupboard Dry Plus

Cupboard Dry Cotton

Synthetics/Permanent Press Quick Dry

Delicates Cool Down

Iron Dry Machine Off

Air Fluff Crease Guard

Freshen Up

17

Cycles

This manual covers several different models. Your dryer may vary from the model shown and

may not have all of the cycles and features described.

Cycle Control knob

Auto Sense Dry Cycle

Use your Auto Sense Dry cycle to dry most loads. Your dryer has a control that senses the

moisture level in the load and shuts off when the load reaches the selected dryness. Select the

temperature from the temperature selector based on the fabrics in your load.

After drying a load in the Auto Sense Dry cycle, check the dryness.

If the load is drier than you like, select a setting closer to Less Dry the next time you dry a

similar load.

If a load is not as dry as you like, complete drying using a timed cycle. Select a setting closer

to Very Dry the next time you dry a similar load.

NOTE: Drying time varies with an Auto Sense Dry cycle. The type of fabric, the size of the

load, and the dryness selected affect drying time. See “Drying, Cycle, and Temperature Tips.”

Timed Dry cycle(s)

Select the correct Timed Dry setting and temperature for your load.

Use a longer Timed Dry setting for heavyweight and bulky items, such as bedspreads and

work clothes, or large loads that require a long drying time. Set the temperature selector, if

available, to High Heat.

Use a shorter Timed Dry setting for lightweight items such as lingerie or knits. Set the

temperature selector, if available, based on the fabrics in your load.

Air Fluff (no heat) cycles

Use the Air Fluff cycle for items that require drying without heat such as rubber, plastic or

heat-sensitive fabrics. Set the Cycle Control knob to Air Fluff. This chart shows examples of

items that can be dried using the Air Fluff cycle.

*(Minutes). Reset cycle to complete drying if needed.

When using Air Fluff (no heat)

■ Check that coverings are securely stitched.

■ Shake and fluff pillows by hand periodically during cycle.

■ Dry item completely. Foam rubber pillows are slow to dry.

Timed Drying Cycle

70.....20 Minutes of heated

drying

Damp Dry

Iron Dry Cool Down

Machine Off Read Operators Manual

Air Dry Cycle

30.....10 Minutes of no-heat

drying

Machine Off

Cycle Control Knob

Type of Load Air Fluff (no heat) cycle*

Foam rubber—pillows, padded bras, stuffed toys

Plastic—Shower curtains, tablecloths

Rubber-backed rugs

Olefin, polypropylene, sheer nylon

20 - 30

40 - 50

10 - 20

18

DRYER CARE

Cleaning the Dryer Location

Keep dryer area clear and free from items that would obstruct the flow of combustion and

ventilation air.

Cleaning the Lint Screen

Every load cleaning

The lint screen is located in the door of the dryer. Clean it before each load. A screen blocked

by lint can increase drying time.

To clean

1. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or

wash screen to remove lint. Wet lint is hard to remove.

2. Push the lint screen firmly back into place.

IMPORTANT:

■ Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so

can cause overheating and damage to both the dryer and fabrics.

■ If lint falls off the screen into the dryer during removal, check the exhaust hood and

remove the lint.

As needed cleaning

Laundry detergent and fabric softener residue can build up on the lint screen. This buildup

can cause longer drying times for your clothes, or cause the dryer to stop before your load is

completely dry. The screen is probably clogged if lint falls off the screen.

Clean the lint screen with a nylon brush every 6 months or more frequently if it becomes

clogged due to a residue buildup.

To wash

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to

remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Replace screen in dryer.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as petrol,

away from dryer.

Place dryer at least 46 cm (18 inches) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

19

Cleaning the Dryer Interior

To clean dryer drum

1. Make a paste with powdered laundry detergent and very warm water.

2. Apply paste to a soft cloth.

OR

Apply a liquid, nonflammable household cleaner to the stained area and rub with a soft

cloth until all excess dye is removed.

3. Wipe drum thoroughly with a damp cloth.

4. Tumble a load of clean cloths or towels to dry drum.

NOTE: Garments that contain unstable dyes, such as denim blue jeans or brightly colored

cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and

will not stain future loads of clothes. Dry unstable dye items inside out to avoid transfer of

dye.

Removing Accumulated Lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning

should be done by a qualified person.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Vacation and Moving Care

Vacation care

Operate your dryer only when you are at home. If you will be on vacation or not using your

dryer for an extended period of time, you should:

1. Disconnect power.

2. Clean lint screen. See “Cleaning the Lint Screen.”

Moving care

1. Disconnect the power supply.

2. Make sure leveling legs are secure in dryer base.

3. Use masking tape to secure dryer door.

20

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Dryer Operation

Dryer will not run

■ Has a household fuse blown, or has a circuit breaker tripped?

Check that the fuse is intact and tight, or that a circuit breaker has not tripped. If the

problem continues, contact a qualified technican.

■ Is the correct power supply available?

Electric dryers require power supply of the voltage specified on the rating label. Check

with a qualified electrician.

■ Was a regular fuse used?

Use a time-delay fuse.

■ Is the dryer door firmly closed?

■ Was the Start button firmly pressed?

No heat

■ Has a household fuse blown, or has a circuit breaker tripped?

Check that the fuse is intact and tight, or that a circuit breaker has not tripped. If the

problem continues, contact a qualified technican.

Unusual sounds

■ Has the dryer had a period of non-use?

If the dryer hasn’t been used for a while, there may be a thumping sound during the first

few minutes of operation.

■ Is a coin, button, or paper clip caught between the drum and front or rear of the dryer?

Check the front and rear edges of the drum for small objects. Clean out pockets before

laundering.

■ Are the four legs installed, and is the dryer level front to back and side to side?

The dryer may vibrate if not properly installed. See the Installation Instructions.

■ Is the clothing knotted or balled up?

When balled up, the load will bounce, causing the dryer to vibrate. Separate the load

items and restart the dryer.

Timer does not noticeably advance

■ Is the dryer set to Timed or Air Dry?

The timer moves slowly and continuously for the time setting.

■ Is the dryer set to Automatic Drying?

The timer moves only when the clothing is mostly dry. See “How Automatic Drying

Works” in “Dryer Use.”

Dryer Results

Clothes are not drying satisfactorily, drying times are too long, or load is too hot

■ Is the lint screen clogged with lint?

Lint screen should be cleaned before each load.

■ Is the exhaust vent or outside exhaust hood clogged with lint, restricting air movement?

Run the dryer for 5-10 minutes. Hold your hand under the outside exhaust hood to check

air movement. If you do not feel air movement, clean exhaust system of lint or replace

exhaust vent with heavy metal or flexible metal vent. See the Installation Instructions.

■ Are fabric softener sheets blocking the grille?

Use only one fabric softener sheet, and use it only once.

■ Is the exhaust vent the correct length?

Check that the exhaust vent is not too long or has too many turns. Long venting will

increase drying times. See the Installation Instructions.

■ Is the exhaust vent diameter the correct size?

Use 10.2 cm (4") diameter vent material.

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death

or fire.

La pagina sta caricando ...

Maytag 3RMED4905TW2 Use & Care Manual Installation Instructions

Questo manuale è adatto anche per

Maytag 3RMED4905TW2 Use & Care Manual Installation Instructions

in altre lingue

Documenti correlati

Altri documenti