Huawei WiFi WS5200 Guida Rapida

HUAWEI WiFi WS5200

Quick Start Guide

Contents

Quick Start Guide

.........................................................................

1

Guide de démarrage rapide

........................................................

15

Kurzanleitung

..............................................................................

29

Guida di avvio rapido

..................................................................

43

Snelstartgids

...............................................................................

57

Guia de início rápido

...................................................................

71

Guía de inicio rápido

...................................................................

85

1

Quick Start Guide

Step 1: Connecting the cables

If the indicator stays red, this indicates that the router is not connected to the Internet.

Please refer to "Step 2: Conguring the network settings".

HUAWEI WiFi WS5200

Optical/broadband/cable modem

Internet

Position the four antennas

upright to ensure optimal

Wi-Fi

®

signal strength.

from your broadband provider

POWER

LAN

PON

RESET

WAN

LAN

2

Connect your mobile phone or computer to the

new router's Wi-Fi network (no password required).

Check the Wi-Fi name on the bottom of the new

router.

Open the browser, you will be automatically

redirected.

(If the page is not displayed automatically,

enter 192.168.3.1 in the address bar.) .

WiFi

Connected

Welcome to

HUAWEI WiFi WS5200

Touch

XXXXXX

Step 2: Conguring the network settings

1

2

Let's Start

Wi-Fi Name: XXXXXX

3

If your Internet

connection does not

require an account and

password:

Please skip to the

next step.

If you remember your

broadband account

and password:

Enter your broadband

account and password.

Broadband account

Broadband password

Old router's WAN port

LAN port

If you have forgotten your broadband account and password,

obtain the broadband account and password from the old router.

Take another Ethernet cable and connect the WAN port of the old

router to the LAN port of the new router.

Or contact your Internet service provider to obtain a broadband

account and password.

Internet access wizard Internet access wizard Internet access wizard

Retrieve

Back

If you need to congure VLAN on your network, contact your broadband carrier to conrm the VLAN

parameters, and enable the VLAN switch on the screen.

Touch

Internet access wizard

Broadband account

Broadband password

VLAN

4

Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.

You can use the Wi-Fi password as the router admin password.

4

Enable

Prioritize 5 GHz

: The 2.4 GHz and 5 GHz Wi-Fi names are the same.

Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal strength is equal to

increase connection speeds.

Conguration

complete

Connect to the new

Wi-Fi network to surf

the Internet

Internet access wizard

Prioritize 5 GHz

Wi-Fi network name

Wi-Fi network password

the router admin password

Touch

Internet access wizard

5

Indicator

If you touch the

H

button accidentally, wait for approximately two

minutes and the indicator will be reset automatically.

The

H

button also features WPS functionality.

Steady green

Steady red

Flashing

Connected to the Internet.

Not connected to the Internet.

The router has detected a pairable device.

Loose cable or connect error. Check the cable.

Broadband network error. Contact your Internet service provider.

When other HUAWEI routers (with

H

or

Hi

button) are detected, the indicator

will ash. When this happens, press the router's

H

button. The indicator

should ash quickly, indicating that the pairable device is connecting to the

router's Wi-Fi. The connection process is complete when the indicator stops

ashing.

6

Manage the router with our mobile app

Scan the QR code to download and install the HUAWEI smart device

management app on your mobile phone or tablet. You can use the app

to manage your router.

7

Frequently Asked Questions (FAQs)

1. What should I do if I encounter any of the following issues when conguring the router?

●

If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a moment (until the router is started)

and try to search again on your device.

●

If you cannot visit the router's web-based conguration page on your device: Ensure that your device is connected to the router's

Wi-Fi network, and then enter 192.168.3.1 in the browser address bar to visit this page on your device.

●

If the page displays "

Cable disconnected

": Ensure that the router's WAN port is connected to the modem's LAN port, and the

modem has Internet access. Check that all contact points are securely connected and in good contact, and the network cables are

in good condition.

●

If the page displays "

Account or password error

": Please enter your broadband account and password again. If the issue

persists, your broadband provider may have bound the MAC address of your old router, causing your new router to be unable to

connect. To x this issue, select

Retrieve

and follow the onscreen instructions. Alternatively, contact your Internet service provider

for assistance.

●

If the page displays "

Failed to retrieve network settings from old router

": Ensure that the router is connected to a power source,

and that the old router's WAN port is already connected to the new router's LAN port. Restart your old router and then touch

Try

again

.

If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the cables and congure the router.

8

2. What should I do if I forget my login password for the app or the router's web-based management page?

4. How do I pair a Wi-Fi device with my HUAWEI WiFi WS5200 using WPS?

3. How do I restore the HUAWEI WiFi WS5200 to its factory settings?

Try using the router's Wi-Fi password to log in. If the issue persists, restore the router to its factory settings.

When your HUAWEI WiFi WS5200 is powered on, press its H button, and then press the WPS button on the Wi-Fi device (such as

a phone) within two minutes to initiate standard WPS negotiation and incorporate the Wi-Fi devices into the router's Wi-Fi network.

Connect the router to the power supply and wait until the router completes the startup process. Use a needle or pin to press the

RESET

button on the router for more than two seconds until the indicator light goes out. Wait for the router to complete the restart

process. When the indicator turns red, this indicates that the router has been restored to its factory settings.

All settings will be cleared if the router is restored to its factory settings. You will need to re-congure the router.

9

5. Does the HUAWEI WiFi WS5200 support 5 GHz Wi-Fi?

How do I connect to the router's 5 GHz Wi-Fi?

5 GHz Wi-Fi is supported.

The Wi-Fi names for 2.4 GHz and 5 GHz are the same by default. You will be automatically connected to the faster Wi-Fi network.

If you want to use 5 GHz Wi-Fi only, you can disable the Prioritize 5 GHz feature by performing the following steps:

1) Connect your phone to the router's Wi-Fi network.

2) Enter 192.168.3.1 in your browser address bar and follow the onscreen instructions to log in.

3) Select

My Wi-Fi

and disable

Prioritize 5 GHz

.

You will now be able to nd two Wi-Fi network names. Connect to the Wi-Fi network with "_5G" at the end of its name.

10

Safety Information

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Wi-Fi

®

, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Version Update

In order to improve the security of the product and provide you with a better user experience, we will push version update information to you on a

regular basis when an important update is released.

Privacy Policy

To better understand how we use and protect your personal information, please read the privacy policy at http://consumer.huawei.com/privacy-policy.

End User License Agreement

Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s management page before using the product.

Safety Information

• Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic

devices.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential

11

interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your

front pocket.

• Avoid dusty, damp, or dirty environments. Avoid magnetic elds. Using the device in these environments may result in circuit malfunctions.

• Ideal operating temperatures are 0°C to 40°C. Ideal storage temperatures are -40°C to +70°C. Extreme heat or cold may damage your device or

accessories.

• Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or

other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.

• The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

• Using an unapproved or incompatible power adapter, charger or battery may cause re, explosion or other hazards.

• For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.

• Unplug the power adapter from electrical outlets and the device when not in use.

• Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.

Disposal and recycling information

The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries

must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream

with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for

separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.

Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that

conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper

recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste,

12

please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in

electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about

REACH and RoHS, please visit our web site http://consumer.huawei.com/certication.

EU regulatory conformance

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device WS5200 V2 is in compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU.

The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certication.

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band:

Norway:

This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed

on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL),

Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands

(NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK),

13

Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Frequency bands and power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local

carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is

less than the highest limit value specied in the related Harmonized Standard.

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:

Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725 MHz: 30dBm.

Accessories and Software Information

It is recommended that the following accessories should be used:

Adapters: HW-120100X01 (X represents the different plug types used, which can be either A, B, C, E, I, J, K, R, U or Z, depending on your region).

The product software version is 10.0.2.2. Software updates will be released by the manufacturer to x bugs or enhance functions after the product

has been released. All software versions released by the manufacturer have been veried and are still compliant with the related rules.

All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.

For the most recent information about accessories and software, please see the DoC (Declaration of Conrmation) at

http://consumer.huawei.com/certication.

ErP Product Information

Huawei Technologies Co., Ltd. hereby declares that its products conform to the Energy-related Products Directive (ErP) 2009/125/EC.

For detailed ErP information and the user manuals required by Commission Regulation, please visit: http://consumer.huawei.com/en/certication.

14

Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.

15

Guide de démarrage rapide

Étape 1 : Brancher les câbles

Si le voyant reste rouge, cela signie que le routeur n'est pas connecté à Internet.

Veuillez vous référer à "Étape 2 : Congurer les paramètres réseau".

HUAWEI WiFi WS5200

Modem Optique/Haut débit/Câble

Internet

Placez les quatre antennes

à la verticale pour garantir

un signal Wi-Fi

®

optimal.

de votre fournisseur

d'accès haut débit

POWER

LAN

PON

RESET

WAN

LAN

16

Connectez votre téléphone portable ou votre

ordinateur au réseau Wi-Fi du nouveau routeur

(pas de mot de passe requis).

Vériez le nom du Wi-Fi (Wi-Fi Name) indiqué

sur la partie inférieure du nouveau routeur.

Ouvrez le navigateur, vous serez

automatiquement redirigé.

(Si la page ne s'afche pas automatiquement,

saisir 192.168.3.1).

Wi-Fi

Connecté

Bienvenue chez

HUAWEI WiFi WS5200

Touchez

XXXXXX

Étape 2 : Congurer les paramètres réseau

1

2

Commençons

Wi-Fi Name: XXXXXX

La pagina sta caricando ...

Huawei WiFi WS5200 Guida Rapida

Huawei WiFi WS5200 Guida Rapida

in altre lingue

Documenti correlati

Altri documenti