Cisco 7940 Series Manuale utente

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

Cisco IP Phone Models

7960 and 7940 User Guide

Customer Order Number: DOC-7810182=

Text Part Number: 78-10182-05

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT

NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT

ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR

THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE

INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU

ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A

COPY.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate

radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television

reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in

part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class

B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any

interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco

equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by

using one or more of the following measures:

• Turn the television or radio antenna until the interference stops.

• Move the equipment to one side or the other of the television or radio.

• Move the equipment farther away from the television or radio.

• Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television

or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE

PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED

OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL

DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR

INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

AccessPath, AtmDirector, Browse with Me, CCIP, CCSI, CD-PAC, CiscoLink, the Cisco Powered Network logo, Cisco Systems Networking

Academy, the Cisco Systems Networking Academy logo, Fast Step, Follow Me Browsing, FormShare, FrameShare, GigaStack, IGX, Internet

Quotient, IP/VC, iQ Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, MGX, the Networkers logo, Packet,

RateMUX, ScriptBuilder, ScriptShare, SlideCast, SMARTnet, TransPath, Unity, Voice LAN, Wavelength Router, and WebViewer are trademarks

of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, and Empowering the Internet Generation,

are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified

Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Enterprise/Solver,

EtherChannel, EtherSwitch, FastHub, FastSwitch, IOS, IP/TV, LightStream, MICA, Network Registrar, PIX, Post-Routing, Pre-Routing, Registrar,

StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and

certain other countries.

All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply

a partnership relationship between Cisco and any other company. (0106R)

Cisco IP Phone Models 7960 and 7940 User Guide

v

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

CONTENTS

Preface ix

About this Guide ix

Related Documentation

For more information, refer to these documents:

• At a Glance Cisco IP Phone 7960 and 7940—This booklet includes basic installation instructions

and ships in the box with each phone

• Quick Reference Cisco IP Phone 7960/7940—This wallet card contains basic instructions and can

be ordered separately

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

x

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Preface

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:

• http://www.cisco.com

• http://www-china.cisco.com

• http://www-europe.cisco.com

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package. The Documentation

CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM

package is available as a single unit or as an annual subscription.

Ordering Documentation

Cisco documentation is available in the following ways:

• Registered Cisco Direct Customers can order Cisco Product documentation from the Networking

Products MarketPlace:

http://www.cisco.com/cgi-bin/order/order_root.pl

• Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription

Store:

http://www.cisco.com/go/subscription

• Nonregistered Cisco.com users can order documentation through a local account representative by

calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by

calling 800 553-NETS(6387).

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical

comments electronically. Click Feedback in the toolbar and select Documentation. After you complete

the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, use the response card behind the front cover of your document, or

write to the following address:

Attn Document Resource Connection

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-9883

We appreciate your comments.

xi

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Preface

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can

obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com

registered users, additional troubleshooting tools are available from the TAC website.

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open

access to Cisco information and resources at anytime, from anywhere in the world. This highly

integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

Cisco.com provides a broad range of features and services to help customers and partners streamline

business processes and improve productivity. Through Cisco.com, you can find information about Cisco

and our networking solutions, services, and programs. In addition, you can resolve technical issues with

online technical support, download and test software packages, and order Cisco learning materials and

merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on Cisco.com to obtain additional personalized information and

services. Registered users can order products, check on the status of an order, access technical support,

and view benefits specific to their relationships with Cisco.

To access Cisco.com, go to the following website:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC website is available to all customers who need technical assistance with a Cisco product

or technology that is under warranty or covered by a maintenance contract.

Contacting TAC by Using the Cisco TAC Website

If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC

website:

http://www.cisco.com/tac

P3 and P4 level problems are defined as follows:

• P3—Your network performance is degraded. Network functionality is noticeably impaired, but most

business operations continue.

• P4—You need information or assistance on Cisco product capabilities, product installation, or basic

product configuration.

In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.

To register for Cisco.com, go to the following website:

http://www.cisco.com/register/

If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users

can open a case online by using the TAC Case Open tool at the following website:

http://www.cisco.com/tac/caseopen

xii

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Preface

Document Conventions

Contacting TAC by Telephone

If you have a priority level 1 (P1) or priority level 2 (P2) problem, contact TAC by telephone and

immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following

website:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

P1 and P2 level problems are defined as follows:

• P1—Your production network is down, causing a critical impact to business operations if service is

not restored quickly. No workaround is available.

• P2—Your production network is severely degraded, affecting significant aspects of your business

operations. No workaround is available.

Document Conventions

This document uses the following conventions:

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in

the publication.

Caution Means reader be careful. In this situation, you might do something that could result in equipment

damage or loss of data.

Convention Description

boldface font Commands and keywords are in boldface.

italic font Arguments for which you supply values are in italics.

[ ] Elements in square brackets are optional.

{ x | y | z } Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by

vertical bars.

string A nonquoted set of characters. Do not use quotation marks around the string

or the string will include the quotation marks.

screen font Terminal sessions and information the system displays are in screen font.

boldface screen font Information you must enter is in boldface screen font.

italic screen font Arguments for which you supply values are in italic screen font.

^ The symbol ^ represents the key labeled Control—for example, the key

combination ^D in a screen display means hold down the Control key while

you press the D key.

< > Nonprinting characters, such as passwords are in angle brackets.

xiii

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Preface

Document Conventions

Warnings use the following conventions:

Warning

This warning symbol means danger. You are in a situation that could cause

bodily injury. Before you work on any equipment, be aware of the hazards

involved with electrical circuitry and be familiar with standard practices

for preventing accidents. (To see translations of the warnings that appear

in this publication, refer to the appendix, “Translated Safety Warnings.”)

Waarschuwing

Dit waarschuwingssymbool betekent gevaar. U verkeert in een

situatie die lichamelijk letsel kan veroorzaken. Voordat u aan

enige apparatuur gaat werken, dient u zich bewust te zijn van de

bij elektrische schakelingen betrokken risico’s en dient u op de

hoogte te zijn van standaard maatregelen om ongelukken te

voorkomen. (Voor vertalingen van de waarschuwingen die in

deze publicatie verschijnen, kunt u het aanhangsel “Translated

Safety Warnings” (Vertalingen van veiligheidsvoorschriften)

raadplegen.)

Varoitus

Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi

johtaa ruumiinvammaan. Ennen kuin työskentelet minkään

laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä

vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista.

(Tässä julkaisussa esiintyvien varoitusten käännökset löydät

liitteestä "Translated Safety Warnings" (käännetyt turvallisuutta

koskevat varoitukset).)

Attention

Ce symbole d’avertissement indique un danger. Vous vous trouvez

dans une situation pouvant entraîner des blessures. Avant

d’accéder à cet équipement, soyez conscient des dangers posés

par les circuits électriques et familiarisez-vous avec les

procédures courantes de prévention des accidents. Pour obtenir

les traductions des mises en garde figurant dans cette

publication, veuillez consulter l’annexe intitulée « Translated

Safety Warnings » (Traduction des avis de sécurité).

Warnung

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer

Situation, die zu einer Körperverletzung führen könnte. Bevor Sie

mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der

mit elektrischen Stromkreisen verbundenen Gefahren und der

Standardpraktiken zur Vermeidung von Unfällen bewußt.

(Übersetzungen der in dieser Veröffentlichung enthaltenen

Warnhinweise finden Sie im Anhang mit dem Titel “Translated

Safety Warnings” (Übersetzung der Warnhinweise).)

xiv

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Preface

Document Conventions

Avvertenza

Questo simbolo di avvertenza indica un pericolo. Si è in una

situazione che può causare infortuni. Prima di lavorare su

qualsiasi apparecchiatura, occorre conoscere i pericoli relativi

ai circuiti elettrici ed essere al corrente delle pratiche standard

per la prevenzione di incidenti. La traduzione delle avvertenze

riportate in questa pubblicazione si trova nell’appendice,

“Translated Safety Warnings” (Traduzione delle avvertenze di

sicurezza).

Advarsel

Dette varselsymbolet betyr fare. Du befinner deg i en situasjon

som kan føre til personskade. Før du utfører arbeid på utstyr, må

du være oppmerksom på de faremomentene som elektriske

kretser innebærer, samt gjøre deg kjent med vanlig praksis når

det gjelder å unngå ulykker. (Hvis du vil se oversettelser av de

advarslene som finnes i denne publikasjonen, kan du se i

vedlegget "Translated Safety Warnings" [Oversatte

sikkerhetsadvarsler].)

Aviso

Este símbolo de aviso indica perigo. Encontra-se numa situação

que lhe poderá causar danos fisicos. Antes de começar a

trabalhar com qualquer equipamento, familiarize-se com os

perigos relacionados com circuitos eléctricos, e com quaisquer

práticas comuns que possam prevenir possíveis acidentes. (Para

ver as traduções dos avisos que constam desta publicação,

consulte o apêndice “Translated Safety Warnings” - “Traduções

dos Avisos de Segurança”).

Advertencia

Este símbolo de aviso significa peligro. Existe riesgo para su

integridad física. Antes de manipular cualquier equipo,

considerar los riesgos que entraña la corriente eléctrica y

familiarizarse con los procedimientos estándar de prevención de

accidentes. (Para ver traducciones de las advertencias que

aparecen en esta publicación, consultar el apéndice titulado

“Translated Safety Warnings.”)

Varning!

Denna varningssymbol signalerar fara. Du befinner dig i en

situation som kan leda till personskada. Innan du utför arbete på

någon utrustning måste du vara medveten om farorna med

elkretsar och känna till vanligt förfarande för att förebygga

skador. (Se förklaringar av de varningar som förekommer i denna

publikation i appendix "Translated Safety Warnings" [Översatta

säkerhetsvarningar].)

CHAPTER

1-1

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

1

Introducing Your Cisco IP Phone

The Cisco IP Phone 7960 and Cisco IP Phone 7940 are full-feature telephones that

provide voice communication over an IP (Internet Protocol) network. These

phones function much like traditional analog phones, allowing you to place and

receive telephone calls. They also support features that you have come to expect

from a telephone—such as speed dialing, redial, call transfer, conference calling,

and voice mail access.

Your Cisco IP Phone offers features that might surprise you. Because it is part of

an IP network, your Cisco IP Phone can provide not only telephony services, but

data services, too—including up-to-the-minute information from the Internet

through an Extensible Markup Language (XML)-based application. In a nutshell,

your Cisco IP Phone provides a whole range of communication features that you

could not expect from a traditional telephone.

A Road Map to Your Cisco IP Phone

Refer to the following illustrations and table to identify the buttons and parts on

your Cisco IP Phone and to find a description of related features.

Note The only difference between the Cisco IP Phone models 7960 and 7940 is the

number of available line or speed dial buttons. The Cisco IP Phone 7940 has

two and the 7960 has six.

Chapter 1 Introducing Your Cisco IP Phone

A Road Map to Your Cisco IP Phone

1-2

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Figure 1-1 Cisco IP Phone 7960

Figure 1-2 Cisco IP Phone 7940

1

4

5

9

7

6

2

3

1011

1617

121314

15

8

58728

1

4

3

1011

1617

121314

15

5

9

7

6

8

58669

2

1-3

Cisco IP Phone Models 7960 and 7940 User Guide

78-10182-05

Chapter 1 Introducing Your Cisco IP Phone

A Road Map to Your Cisco IP Phone

1

Handset with

indicator light

Functions like a traditional handset. The light strip at the

top of the handset blinks when the phone rings and

remains lit to indicate a new voice mail message.

2

LCD screen Displays features such as the time, date, your phone

number, caller ID, line/call status and soft key tabs.

3

Cisco IP Phone

model type

Indicates your Cisco IP Phone model.

4

Line or speed

dial button

Opens a new line, speed dials the number on the LCD

screen, or ends a call. The Cisco IP Phone 7960 has six

line or speed dial buttons and the 7940 has two.

5

Footstand

adjustment

Allows you to adjust the angle of the phone base.

6

Directories

button

Provides access to call histories and directories.

7

i button Displays help on your LCD screen for a phone button or

function.

8

Settings button Provides access to phone settings such as contrast and ring

sound, network configuration, and status information.

9

Speaker button Toggles the speaker on or off.

10

Mute button Toggles the mute on or off.

11

Headset button Toggles the headset on or off.

12

Volume button Increases or decreases volume for the handset, headset, or

speakerphone (depending upon which is currently active).

Also controls the ringer volume (if on-hook), and the LCD

contrast.

Cisco 7940 Series Manuale utente

Questo manuale è adatto anche per

Cisco 7940 Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti