JennAir JBZFL18IGX Guida d'installazione

     l

COLUMN REFRIGERATION

SINGLE UNIT

RÉFRIGÉRATEUR INTÉGRÉ EN COLONNE

COMPARTIMENT UNIQUE

W10918241A

IMPORTA NT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

SAVE THESE INSTRUCTIONS

■ To avoid a hazard due to instability of the appliance, it must

be fixed in accordance with the instructions.

■

Plug into a grounded 3 prong outlet.

■

Installation shall be performed only by manufacturer, or an

authorized agent.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Remove doors from your old refrigerator.

■ Use nonflammable cleaner.

■ Do not store or use petrol, flammable liquids or gas in the

vicinity of this or other electrical appliances. The fumes can

cause fires or explosions.

■ Do not store explosive substances such as aerosol cans

with a flammable propellant in this refrigerator.

■ Do not use or place electrical devices inside the refrigerator

compartments if they are not of the type expressly

authorized by the manufacture.

■ Use two or more people to move and install refrigerator.

■ Disconnect power before installing ice maker (on ice maker

kit ready models only).

■ A qualified service technician must install the water line and

ice maker. See installation instruction supplied with

ice maker kit IC13B for complete details.

■ Connect to a potable water supply only.

■

Use a sturdy glass when dispensing ice (on some models).

■ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

■ Children should be supervised to ensure that they do not

play with the appliance.

■ To avoid the risk of children becoming trapped and

suffocating, do not allow them to play or hide inside

the refrigerator.

■

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified person

in order to avoid a hazard.

■ This refrigerator is intended to be used in household and

similar applications such as:

– staff kitchen areas in shops, offices, and other working

environments

– farm houses and by clients in hotels, motels, and other

residential type environments

– bed and breakfast type environments

– catering and similar non-retail applications

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or

brain damage.

With the launch of the ﬁrst ever JennAir

®

columns, we reimagined the entire columns

installation process, eliminating problems that affect our sub-par competitors. Some of

the features professional installers are most excited about:

• Concealed six-point panel adjustment

Easy and precise alignment

• Site-tailored Rotter system shims

Guide and keep column in position

• Precision four-point front leveling

On sturdy rollers that easily bear full weight

• Metal fascia

Increases durability

EASE. SPEED. SAFETY.

• Solid wood core stainless steel panels

Easy to prep and hang and do not

require drilling through steel

• Expanded utility areas

Reduced changes to replace built-ins

or upgrade from competitor columns

And with your help, we’ll just keep getting better.

Contact the JennAir Epicenter through jennair.com or at 1-800-JENNAIR (536-6247)

to report installation tips and tricks, or to consult with experts who know

the installation process inside and out.

INTRODUCTION 3

IMPORTANT: Child entrapment and

suffocation are not problems of the past.

Junked or abandoned refrigerators are still

dangerous – even if they will sit for "just a

few days." If you are getting rid of your old

refrigerator, please follow these instructions

to help prevent accidents.

Before You Throw Away Your Old

Refrigerator or Freezer:

■ Take off the doors.

■ Leave the shelves in place so that children

may not easily climb inside.

WHY WE LOVE

JENNAIR INSTALLERS

THEY’RE TOTAL PROFESSIONALS AND PERFECTIONISTS.

It’s all about getting that seamless ﬂush execution, that down-to-the-

millimeter adjustment. Flawless installation is incredibly important to

the function, appearance and lifetime enjoyment of our products, and

our installers make it happen every day.

THEY DO THEIR HOMEWORK. AND HELP US WITH OURS.

These experts know JennAir

®

products inside and out. They train

extensively on JennAir installation, learning the latest techniques and

insider tips so they can install our cutting edge appliances with ease.

And we value their input, incorporating installer feedback to reﬁne and

perfect our installations.

THEY THINK THROUGH EVERY DETAIL OF THE EXPERIENCE.

Above and beyond dedication is the baseline. The JennAir experience

starts the minute an installer brings the customer’s column home.

Keeping the site spotless, taking extreme care with both the appliances

and the home and providing an unforgettable introduction to columns

is all part of the game plan.

4 INTRODUCTION

TABLE OF CONTENTS

INTRODUCTION

02 SAFETY INSTRUCTIONS

06 TOOLS & PARTS

08 PRODUCT DIMENSIONS

10 OPENING DIMENSIONS

12 SITE PREP

PREPARATION

16 SECTION 1  COLUMN

21 SECTION 2  FURNITURE

COLUMN

28 SECTION 3  INSTALLATION

TOEKICK

36 SECTION 4  COLUMN PREPARATION

42 SECTION 5  CUSTOM WOOD

PREPARATION

46 SECTION 6  STAINLESS STEEL

PREPARATION

49 SECTION 7  ALIGNMENT

AND INSTALLATION

PANEL

55 SECTION 8 CUSTOM WOOD

PREPARATION

60 SECTION 9  STAINLESS STEEL

PREPARATION

63 SECTION 10  HANGING

AND ADJUSTMENT

COMPLETE

70 SECTION 11  COMPLETE INSTALLATION

APPENDIX

74 ADDITIONAL SHIM INFORMATION

WHY WE LOVE

JENNAIR INSTALLERS

INTRODUCTION 5

TABLE DES MATIÈRES

INTRODUCTION

76 INSTRUCTIONS DE SÉCURITÉ

80 OUTILS ET PIÈCES

82 DIMENSIONS DU PRODUIT

84 DIMENSIONS DE L’OUVERTURE

86 PRÉPARATION DE L’EMPLACEMENT

PRÉPARATION

90 SECTION1  RÉFRIGÉRATEUR

INTÉGRÉ EN COLONNE

95 SECTION2  MEUBLE

RÉFRIGÉRATEUR INTÉGRÉ

EN COLONNE

102 SECTION3  INSTALLATION

PLINTHE

110 SECTION4  PRÉPARATION

DE L’APPAREIL

116 SECTION5  PRÉPARATION DU

PANNEAU EN BOIS PERSONNALISÉ

120 SECTION6  PRÉPARATION DU

PANNEAU EN ACIER INOXYDABLE

123 SECTION7  ALIGNEMENT ET

INSTALLATION

PANNEAU

129 SECTION8  PRÉPARATION DU

PANNEAU EN BOIS PERSONNALISÉ

134 SECTION9  PRÉPARATION DU

PANNEAU EN ACIER INOXYDABLE

137 SECTION10  SUSPENSION ET

AJUSTEMENT

TERMINER

144 SECTION11  TERMINER

L’INSTALLATION

ANNEXE

148 INFORMATIONS SUPPLÉMENTAIRES

SUR LES CALES

TOOLS + PARTS

PROVIDED

#2 Square-drive screws

(3-24004-079)

8-18 x 3/4 Phillips head screws

(W11041176)

6-20 x .375 screws

(246131)

5 mm driver bit

(W11121505)

Four installation shims

(W10913387)

3 mm driver bit

(W11121512)

Shim installation template

(W11040585)

READ AND FOLLOW THE INSTRUCTIONS PROVIDED WITH

ANY OF THE TOOLS LISTED

6 INTRODUCTION

3MM

5MM

Toe-kick and door panel installation template

(W11040865)

3 mm Allen wrench

5 mm Allen wrench

Gripping pads

(W10840464)

TOOLS + PARTS

NOT PROVIDED

TOOLS



Cordless drill and drill bits or impact driver



Drill bit set including 3/32" and 1/8" diameter bits



Two adjustable wrenches



#2 Phillips bit



1/4" magnetic nut driver



#2 square-drive bit



48" or longer level or straight edge



3/8" and 1/2" open-end wrenches



Tape measure



Utility knife



Masking tape



Appliance dolly



Right angle drill adapter



6" drill extension



#8 pan head wood screws of assorted lengths

including 1", 1-1/4", 1-1/2"

PARTS



Flexible code-approved water supply line



Custom door overlay panels

• Stainless steel panels: order from JennAir

• Custom wood panels: consult a qualiﬁed

cabinetmaker or carpenter



Additional fasteners will be required according

to the kitchen furniture construction

This recommended process might be unfamiliar to you as an installer, but it adds

enormous value to both you and your client. Use the Rotter system to:

• Help position column without scratching

• Create precise 1/8" reveals on each side

• Always have ready-made shims tailored to each site

• Keep column stable in cutout over lifetime

• Eliminate misalignment issues for your client

WHY USE

ROTTER

SYSTEM

SHIMS?

INTRODUCTION 7

9/32”

1/4”

3/16” 1/8”

1/16”

DIMENSIONS

PRODUCT

OVERALL PRODUCT NO PANEL

Width See unit width table below

Height 83-1/2" (212 cm)

Depth 23-7/8" (60.6 cm)

Raw Door Height 62-3/16" (157.9 cm)

Toe-kick Height 3-9/16" (9.1 cm)

Toe-kick Depth 3-1/4" – 4-7/8" (8.3 cm-12.4 cm)

PRODUCT WIDTH

Model Width

18"

JBZFR18IGX

JBZFL18IGX

17-3/4"

(45.1 cm)

24"

JBRFR24IGX

JBRFL24IGX

JBZFR24IGX

JBZFL24IGX

23-3/4"

(60.3 cm)

30"

JBRFR30IGX

JBRFL30IGX

JBZFR30IGX

JBZFL30IGX

29-3/4"

(75.6 cm)

36"

JBRFR36IGX

JBRFL36IGX

35-3/4"

(90.8 cm)

Width varies

(See table)

83 1/2"

23-7/8"

8 INTRODUCTION

DIMENSIONS

ACCESSORIES

CUSTOM TOEKICK

Height 3-9/16" (9.1 cm)

Thickness 3/16"-3/4" (.47 cm-1.9 cm)

STAINLESS STEEL PANEL

Height 80" (203.2 cm)

Thickness 13/16" (2.1 cm)

CUSTOM PANEL

Thickness 3/4" (1.9 cm) max.

Weight 60 lbs. (27.2 kg) max.

Typical Height 80" (203.2 cm)

MODEL FLUSH WIDTH

18" 17-3/4" (45.1 cm)

24" 23-3/4" (60.3 cm)

30" 29-3/4" (75.6 cm)

36" 35-3/4" (90.8 cm)

MODEL OVERLAY WIDTH

18" 19" (48.3 cm)

24" 25" (63.5 cm)

30" 31" (78.7 cm)

36" 37" (94 cm)

1/8"

Furniture

Panel

Furniture

Panel

INTRODUCTION 9

DOOR STYLE

CUSTOM PANEL WIDTH

1/8"

DIMENSIONS

OPENING

OPENING WIDTH

Model Width (A)

18"

JBZFR18IGX

JBZFL18IGX

18"

(45.7 cm)

24"

JBRFR24IGX

JBRFL24IGX

JBZFR24IGX

JBZFL24IGX

24"

(61 cm)

30"

JBRFR30IGX

JBRFL30IGX

JBZFR30IGX

JBZFL30IGX

30"

(76.2 cm)

36"

JBRFR36IGX

JBRFL36IGX

36"

(91.4 cm)

8"

84"

25"

**

*Sofﬁt not required for

a single column install

**24" with 24" trim kit

Width (A)

10 INTRODUCTION

Furniture

return

Sofﬁt

*

B

C

D

A

DIMENSIONS

OPENING

DOOR SWING REQUIREMENTS

Model 115º Door Swing "A" 90º Door Swing "B" Wall Gap "C" Door Open Depth "D"

18" 10-1/2" (26.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 44-1/2" (113 cm)

24" 13" (33 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 50-1/2" (128.3 cm)

30" 15-1/2" (39.4 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 56-3/8" (143 cm)

36" 18" (45.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 62-7/16" (158.6 cm)

Dimensions give 2-1/2" spacing between stainless steel handle accessory and wall to avoid pinching.

For a custom wood panel, consider handle depth to maintain 2-1/2" spacing.

INTRODUCTION 11

SITE PREP

1. CHECK THE FURNITURE



Measure to make sure all opening dimensions

are correct. (See previous page.)



Side panel construction: 3/4" (1.9 cm)

thick plywood

IMPORTANT: Cannot be constructed of pressed

ﬁber material such as MDF.



Sofﬁt height (if present): 84" (213.4 cm)

2. CHECK THE INSTALLATION SITE



Away from ovens, radiators or other heat sources.



Temperature will not fall below 55° F (13° C).



Floor supports more than 600 lbs. (272 kg)

plus door panel and contents weight.



Floor level with the room.



Furniture face plumb.

Furniture

Return

Side

Panel

12 INTRODUCTION

Sofﬁt

84"

Furniture

Return

Side

Panel

1/8" max

SITE PREP

3. CHECK THE WATER SUPPLY



Water supply meets local plumbing codes.



Water shutoff in base cabinet, as shown,

or accessible area.



Access hole through the cabinet is within 1/2"

(1.3 cm) of the rear wall.



Install any additional tubing only where

temperatures remain above freezing.

Check for leaks.



Not using a piercing-type or 3/16" (4.76 mm)

saddle valve. See refrigerator dealer for

saddle-type valve kit that complies with

local plumbing codes.



If water pressure to reverse osmosis system

is less than 40 to 60 psi (276 to 414 kPa):

• Check sediment ﬁlter to see if it is blocked.

Replace ﬁlter if necessary.

• Allow the storage tank to reﬁll after

heavy usage.

• Remove the water ﬁlter cartridge.

No ﬁlter bypass is necessary.

WATER SUPPLY REQUIREMENTS

Water Pressure 30 – 120 psi (207 – 827 kPa)

Water Pressure to

Reverse Osmosis

System

Minimum 40 – 60 psi

(276 – 414 kPa)

Excess Water Line

for Connection

30" (76.2 cm)

Supply 1/4" OD copper, braided

stainless steel or PEX tubing

IF YOU HAVE QUESTIONS ABOUT YOUR WATER SUPPLY,

CALL A LICENSED, QUALIFIED PLUMBER

Water shutoff

Access hole

(within 1/2" of rear wall)

?

INTRODUCTION 13

SITE PREP

4. CHECK THE ELECTRICAL



Column on a separate circuit. Outlet cannot

be turned off by a switch.



Not using an extension cord.



Not using a GFCI protected outlet.



Electrical installed in the zones highlighted.

(See graphic to the right.)

ELECTRICAL REQUIREMENTS

Product Width/

Alternate Electrical

Zone Width "A"

Electrical Zone Width "B"

18" (45.7 cm) 14-1/2" (36.8 cm)

24" (61 cm) 20-1/2" (52 cm)

30" (76.2 cm) 26-1/2" (67.3 cm)

36" (91.4 cm) 32-1/2" (82.6 cm)

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result

in death, ﬁre, or electrical shock.

Electrical zone

Alt electrical zone

(inside cabinet

above column)

"A" width x 12" height

"A" width x 3-1/2" height

"B" width x

6-1/2" height

Alt electrical zone

4-1/2"

1-3/4"

IF YOU HAVE QUESTIONS ABOUT YOUR ELECTRICAL SUPPLY,

CALL A LICENSED, QUALIFIED ELECTRICIAN

?

14 INTRODUCTION

SITE PREP

INTRODUCTION 15

5. PREINSTALLATION CHECK



Verify customer’s selected door style.



Remove all installation materials from

the deli drawer.



Mark selected door style on templates and

door depth gauges with a permanent marker.



Verify that the diagonal measurements

of opening match.



Check design considerations document to

verify panel and toe-kick dimensions, as well

as gaps and overlays.

16

1



PREPARATION

17

1.1

UNCRATE COLUMN, DISCARD CARTON.

COLUMN

PREPARATION

1

REMOVE INSTALLATION KIT FROM DELI DRAWER WHILE ON SKIDS

BEFORE MOVING COLUMNS, REVIEW ALL WARNINGS.

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for

cleaning or service, be sure to cover the floor with

cardboard or hardboard to avoid floor damage. Always pull

the refrigerator straight out when moving it. Do not wiggle or

“walk” the refrigerator when trying to move it, as floor

damage could occur.

18

1.3

REMOVE BOTH WATER FILTER SCREWS.

COLUMN

PREPARATION

1

5mm driver bit

1.2

MOVE COLUMN IN FRONT OF OPENING.

USE TWO PEOPLE. DO NOT OPEN DOOR UNTIL COLUMN IS SECURED

19

1.4

2

1

PULLING LEFT, REMOVE FACEPLATE.

1.5

PULL HOUSING FORCEFULLY RIGHT, REMOVE.

COLUMN

PREPARATION

1

20

1.7

REMOVE BASE AIR GRILLE.

COLUMN

PREPARATION

1

2

1

2

1.6

REMOVE FOUR AIR GRILLE SCREWS.

5mm driver bit

La pagina si sta caricando...

JennAir JBZFL18IGX Guida d'installazione

JennAir JBZFL18IGX Guida d'installazione

in altre lingue

Documenti correlati

Altri documenti