Edimax EW-7822UAC Guida d'installazione

Marca: Edimax

Modello: EW-7822UAC

Tipo: Guida d'installazione

Di seguito troverai brevi informazioni per EW-7822UAC V2.0A. Questo adattatore USB wireless dual-band 11ac 2T2R consente la connessione wireless a reti a 2,4 GHz e 5 GHz. Supporta i sistemi operativi Windows, macOS e Linux. L'installazione richiede un lettore CD-ROM o un download dei driver dal sito Web Edimax, nonché una porta USB 3.0. Seguire le istruzioni nella guida rapida per installare il driver e configurare la connessione di rete wireless.

Quick Installation Guide

EW-7822UAC V2.0A

11ac 2T2R Wireless Dual-Band

USB Adapter

I. Product Information .............................................................................. 2

I-1. Package Contents .................................................................................................................. 2

I-2. LED Status .............................................................................................................................. 2

I-3. System Requirements ............................................................................................................ 2

I-4. Safety ..................................................................................................................................... 3

II. Installation ............................................................................................ 4

III. Windows ............................................................................................... 5

III-1. Driver Installation .................................................................................................................. 5

III-2. Driver Uninstallation .............................................................................................................. 6

III-2-1. Windows 7, 8.1 & 10 .............................................................................................................. 6

IV. Disabling Network Adapters .................................................................. 7

V-1. Windows 7 ............................................................................................................................. 7

V-2. Windows 8.1 & 10 .................................................................................................................. 8

Federal Communication Commission Interference Statement ........ 9

RED Compliance Statement ................................................................. 10

EU Declaration of Conformity .............................................................. 11

I. Product Information

I-1. Package Contents

I-2. LED Status

LED

LED Status

Description

WLAN

Wireless activity: transmitting or receiving data.

Off

No wireless activity.

I-3. System Requirements

- Windows 7/8/10 ~, Mac OS X 10.7~, Linux

- USB 3.0 Port

- Hard Disk: 100MB

- CD-ROM Drive

EW-7822UAC V2.0A

I-4. Safety

In order to ensure the safe operation of the device and its users, please read

and act in accordance with the following safety instructions.

1. The wireless adapter is designed for indoor use only; do not place the

wireless adapter outdoors.

2. Do not place the wireless adapter in or near hot/humid places, such as a

kitchen or bathroom.

3. The wireless adapter contains small parts which are a danger to small

children under 3 years old. Please keep the wireless adapter out of reach of

children.

4. There are no user-serviceable parts inside the wireless adapter. If you

experience problems with the wireless adapter, please contact your dealer

of purchase and ask for help.

5. The wireless adapter is an electrical device and as such, if it becomes wet

for any reason, stop using it immediately. Contact an experienced electrical

technician for further help.

II. Installation

1. Switch on your computer and insert the USB adapter into an available USB

port of your computer.

Never use force to insert the USB adapter.

2. Insert the included CD-ROM into the CD drive of your computer.

The setup wizard is also available for download from the Edimax

website.

3. For Windows users the setup wizard will open. For Mac users the CD’s

“Mac” folder will open.

If the CD doesn’t auto-run or if you downloaded the setup wizard,

please browse to the “Autorun” or “Mac” folder of the CD for

Windows or Mac users respectively.

4. Please follow the instructions in the appropriate chapter for your

operating system.

III. Windows

III-1. Driver Installation

1. Click Setup to continue.

2. Click “Next” to continue and please wait while the driver is installing.

3. You need to restart your computer before using the wireless adapter.

Choose whether to restart your computer now or later, and click “Finish”.

4. Please disable any other wireless adapters as described in V. Disabling

Network Adapters. Then, Windows users can connect to an available Wi-Fi

network as usual. For guidance on doing so, please refer to VI. Using The

Adapter.

III-2. Driver Uninstallation

To uninstall drivers for your adapter, use the Windows Control Panel built-in

Programs and Features, Uninstall a Program or Add or Remove Programs feature.

An example is shown below:

III-2-1. Windows 7, 8.1 & 10

1. Open Control Panel using the Start menu

or Search function.

2. Select Uninstall a program under the

Programs category.

3. Select Realtek USB Wireless LAN Driver (or similar) and click Uninstall.

IV. Disabling Network Adapters

To ensure that your USB wireless adapter can function correctly, it is

recommended that you disable any other existing wireless network adapters

installed on your computer. If you are unsure how to do so, you can refer to

the user manual for your computer, or follow the guidance below.

V-1. Windows 7

Go to Start > Control Panel. Click View network status and tasks > Wireless

Network Connection and click Disable.

V-2. Windows 8.1 & 10

1. Go to File Explorer > Network (right click) > Properties > Change adapter

settings.

2. Right click your wireless adapter, select “Properties” and then “Disable”.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or

transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

authority to operate equipment.

This device is restricted to indoor use.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

device was tested for typical lap held operations with the device contacted directly to the human body to the

back side of the notebook computer. To maintain compliance with FCC RF exposure compliance requirements,

avoid direct contact to the transmitting antenna during transmitting.

Body SAR

This product meets applicable national SAR limits of 1.6W/kg.

This specific maximum SAR values can be found in the section of this user guide. When carrying the product or

using it while worn on your body, maintain a distance of 0.5cm from the body to ensure compliance with RF

exposure requirements.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels

is not possible.

RED Compliance Statement

Compliance with 2014/53/EU Radio Equipment Directive (RED)

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the

frequency bands used and the maximum RF transmit power of the product for sale in the EU:

Frequency range (MHz)

Max. Transmit Power (dBm)

2412-2472

19.85

5180-5240

21.52

A simplified DoC shall be provided as follows: Article 10(9)

Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type 11ac 2T2R Wireless LAN Dual-Band

USB Adapter is in compliance with Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the following internet address:

http://www.edimax.com/edimax/global/

This device meets the EU RED requirements on the limitation of exposure of the general public to electromagnetic

fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and

the European SAR is measured with this device at a separation of 0.5cm to the body, while transmitting at the

highest certified output power level in all frequency bands of this device. Carry this device at least 0.5cm away

from your body to ensure exposure levels remain at or below the as-tested levels.

For class 2 device (supporting WLAN 5GHz: 5150-5350 MHz)

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special

attention must be paid to the dangers of electric shock and static electricity when working with electrical

equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to

ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI

version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and

Switzerland.

EU Countries Not Intended for Use

None

EU Declaration of Conformity

English: This equipment is in compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU, 2014/35/EU.

Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la

directive 2014/53/EU, 2014/35/EU.

Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními

směrnic 2014/53/EU, 2014/35/EU.

Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami

określonymi Dyrektywą UE 2014/53/EU, 2014/35/EU.

Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale

Directivei 2014/53/UE, 2014/35/UE.

Русский: Это оборудование соответствует основным требованиям и положениям Директивы

2014/53/EU, 2014/35/EU.

Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek

(2014/53/EU, 2014/35/EU).

Türkçe: Bu cihaz 2014/53/EU, 2014/35/EU direktifleri zorunlu istekler ve diğer hükümlerle ile

uyumludur.

Українська: Обладнання відповідає вимогам і умовам директиви 2014/53/EU, 2014/35/EU.

Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc

2014/53/EU, 2014/35/EU.

Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/53/EU, 2014/35/EU.

Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU,

2014/35/EU.

Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili

della Direttiva 2014/53/EU, 2014/35/UE.

Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen

van richtlijn 2014/53/EU, 2014/35/EU.

Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/53/EU, 2014/35/EU.

Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv

2014/53/EU, 2014/35/EU.

Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta

bestämmelser i direktiv 2014/53/EU, 2014/35/EU.

Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante

forordninger i direktiv 2014/53/EU, 2014/35/EU.

suomen kieli: Tämä laite täyttää direktiivien 2014/53/EU, 2014/35/EU. oleelliset vaatimukset ja muut

asiaankuuluvat määräykset.

Edimax EW-7822UAC Guida d'installazione

Marca: Edimax

Modello: EW-7822UAC

Tipo: Guida d'installazione

Scarica PDF

rapporto

in altre lingue

English: Edimax EW-7822UAC Installation guide
română: Edimax EW-7822UAC Ghid de instalare

Edimax EW-7822UAC Guida d'installazione

Edimax EW-7822UAC Guida d'installazione

in altre lingue

Documenti correlati

Altri documenti