ZyXEL N4100 Manuale del proprietario

Categoria
Router
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

www.zyxel.com
Wireless N HotSpot Gateway
Version 1.00
Edition 1, 02/2010
N4100
DEFAULT LOGIN DETAILS
IP Address: http://192.168.1.1
Username: admin
Password: 1234
CONTENTS
ENGLISH 3
DEUTSCH 17
ESPAÑOL 35
FRANÇAIS 53
ITALIANO 71
РУССКИЙ 89
SVENSKA 107
繁體中文
123
Copyright 2010
ZyXEL Communications Corporation
2
Device Panels
RESET
POWER
LEDs
LAN/WAN Connectors
Antennas
ENGLISH
3
Introduction
The N4100 combines an IEEE 802.11b/g/n wireless access point, router,
4-port switch and service gateway in one box. A "statement printer"
allows you to easily generate subscriber accounts and print account
statements. You can connect it directly to the N4100. The subscriber is a
client with authenticated access to the Internet through the N4100.
In this example, a computer connects to the N4100’s (a) LAN port for
management. You also attach a RADIUS server for subscriber
authentication and a statement printer (c) for statements printing. The
N4100 connects to a broadband modem (b), which then connects to the
Internet. Wireless subscribers have seamless Internet access through
the N4100.
In this guide, you will:
• Make Hardware Connections to set up your device.
• Access the Web Configurator to use the Setup Wizard to configure
the WAN connection, wireless settings, e-mail and authentication
services, and set the billing profile on the N4100. You can also use
the wizard to set how to generate accounts and print statements,
and change the system password and time.
LAN
WLAN
WAN
a
b
c
ENGLISH
4
• Hang the N4100 on a wall.
Hardware Connections
This section shows you how to set up your N4100.
1
2
3
4
ENGLISH
5
1. LAN 1~4: Use Ethernet cables to connect the LAN ports to
computers, switches and a statement printer (optional).
2. WAN: Connect your broadband modem to this port with the Ethernet
cable that came with your modem.
3. Attach the included antennas to the N4100. The antennas should be
perpendicular to the ground and parallel to each other.
4. POWER: Connect the N4100's included power adaptor to the
N4100's power socket.
Check the LEDs (Lights)
Look at the LEDs (lights) on the front panel of the N4100.
• The PWR light (LED) turns on.
• The WAN or LAN light turns on if its corresponding port is properly
connected. The lights blink when the N4100 is sending or receiving
data through the corresponding port.
• The WLAN light stays green when the wireless LAN is enabled. It
blinks when the N4100 is sending/receiving data through the
wireless LAN.
• The SYS light turns on once the N4100 is ready.
6
If no lights are on, check your connections. Make sure that
you have the power adaptor connected to the N4100 and
plugged in to an appropriate power source. Make sure the
power source is turned on. Turn the N4100 off, wait for a few
seconds and turn it back on. If the LEDs are still off, contact
your local vendor.
Web Configurator
This section shows you how to access and log into the Web
Configurator.
1. From the computer connected to the N4100, open a web browser
such as Internet Explorer or Firefox.
2. Enter http://192.168.1.1 (the
N4100’s default LAN IP address) in
the browser’s address bar.
3. Enter admin as the default user name and 1234 as the default
password. Click Login.
ENGLISH
7
If the login screen does not display, make sure you allow
web browser pop-up windows, JavaScript and Java
permissions. Your computer should be also set to get an IP
address automatically from a DHCP server. See the User’s
Guide for more information.
Setup Wizard
The wizard setup screens appear automatically after your first login.
1. Fill in the fields with information from your ISP. The screen varies
depending on the encapsulation type you use. Leave fields set to the
default if you don't have that information.
If your ISP didn’t provide you any Internet access information, select
DHCP Client.
8
If your ISP gave you an IP address (and gateway and DNS server
addresses), select
Static IP Setting and enter them.
If your ISP gave you a user name and password, select
PPPoE.
ENGLISH
9
If your ISP gave you a user name, password and IP address(es),
select
PPTP.
2. Enter a unique name (up to 32 printable 7-bit ASCII characters) as
the ESSID to identify the N4100 in the wireless LAN.
Select a channel (range of radio frequencies) that is not being used
by other wireless devices in the area.
Select a security type and enter a key for data encryption. If you set
Security to Disabled, any one within range can access your network
wirelessly.
WPA or WPA2 provides user authentication and data encryption.
Data encryption of WPA or WPA2 is stronger than WEP's. The pre-
shared key is case-sensitive ASCII characters (including spaces and
10
symbols). Use the advanced wireless setup screen if you want to use
WPA or WPA2 with a RADIUS server (see the User's Guide for
details).
WEP provides data encryption only (no user authentication).
3. You can configure a backup e-mail server in the event that a
subscriber's e-mail server is unreachable from the N4100.
ENGLISH
11
4. Select Yes to be able to create and use subscriber accounts that are
used to authenticate clients connecting to the Internet. This wizard
configures authentication and accounting settings for the N4100's
built-in local subscriber database. Use the advanced RADIUS setup
screen to use an external RADIUS server instead (see the User's
Guide for details).
5. Set the type of accounting to use. Set up Internet access time periods
and their prices.
12
6. You can use a statement printer to generate subscriber accounts and
print subscriber statements. If you do so, make sure that no other
devices on your network use the same IP address as the printer
(192.168.1.7 by default). If you need to change the printer port
number or IP address here, make sure you also change it in the
printer, see the printer's user's guide for how to do this.
You can alternatively generate subscriber accounts in the web-based
account generator and print the statements on your regular printer.
7. Select a subscriber billing profile for each button on the "exclusive
printer" (statement printer) or the web-based account generator. The
billing profile defines the maximum Internet access time and charge
per time unit.
Set how many copies of the subscriber statement to print.
Click Customize printout text to tailor the subscriber statements.
See the CUSTOMIZATION > Account Printout section in your
User’s Guide for how to tailor what displays on the subscriber
statements.
ENGLISH
13
For the three button (statement) printer, click I want to setup... to
also configure the web-based account generator settings.
Set the username and password for accessing the account generator.
Click Preview/Operate to open the account generator. The web-
based account generator panel displays. Click one or more of the
buttons to generate accounts.
14
Click View Account List to see the accounts you generated.
8. Change the N4100's management password and update the time.
You can also specify from which IP address the N4100 can be
managed. Click Finish to save your changes and go back to the
System Quick View screen.
ENGLISH
15
Generating and Printing
Subscriber Account Statements
If you have a statement printer connected and turned on, simply press
the buttons to generate and print subscriber account statements. If you
are using a PC-connected printer, do the following.
1. Launch your web browser and go to
http://192.168.1.1 (as in the Web
Configurator section).
2. Enter the web-based account generator
user name and password that you
configured in the wizard (see page 13).
3. Click the buttons in the screen to
generate accounts.
4. The details of each new account display
in a separate window. Click the Print
button to print out the account
statement.
Hardware Installation
In general, the best location for the access point is at the center of your
intended wireless coverage area. For better performance, mount the
N4100 high up in a spot free of obstructions.
Do not block the ventilation holes.
16
Wall-mounted Installation
1. Install the two included screws in the wall 80mm (3.15") apart. Do not
screw the screws all the way into the wall. Leave a small gap between
the head of the screws and the wall.
2. Make sure the screws are securely fixed to the wall and strong
enough to hold the weight of the N4100 with the connection cables.
3. Hang the N4100 on the screws.
DEUTSCH
17
Einführung
Der N4100 vereint einen drahtlosen IEEE 802.11b/g/n Access Point,
Router, 4-Port-Switch und Service-Gateway in einem Gerät. Mit dem
"Belegdrucker" können Sie problemlos Zugangskonten erzeugen und
Kontoberichte ausdrucken. Er kann direkt an den N4100 angeschlossen
werden. Der Benutzer ist ein Client mit authentifiziertem Zugriff auf das
Internet über den N4100.
In diesem Beispiel wird zur Verwaltung ein Computer an den LAN-Port
des N4100 (a) angeschlossen. Sie können auch einen RADIUS-Server
zur Subscriber-Authentifizierung und einen Kontoberichtsdrucker (c)
zum Ausdrucken der Kontenberichte anschließen. Der N4100 wird an
ein Breitbandmodem (b) angeschlossen, das dann wiederum die
Verbindung zum Internet herstellt. Drahtlose Subscribers haben über
den N4100 einen kabellosen Internetzugriff.
In diesem Benutzerhandbuch wird
beschrieben:
• Wie der Anschließen der Hardware Ihr Gerät einrichtet.
LAN
WLAN
WAN
a
b
c
DEUTSCH
18
• Wie Sie auf den Web-Konfigurator zugreifen können, um mit dem
Einrichtungsassistenten die WAN-Verbindung, die
Drahtloseinstellungen, den E-Mail- und Authentifizierungs-Dienst
und das Abrechnungsprofil auf dem N4100 zu konfigurieren. Sie
können mit dem Assistenten auch festlegen, wie die Konten und
Kontenberichte erzeugt werden sollen, und das Systemkennwort
und die Uhrzeit ändern.
• Wie Sie den N4100 an einer Wand installieren.
Anschließen der Hardware
DEUTSCH
19
In diesem Abschnitt wird beschrieben, wie der N4100 eingerichtet wird.
1. LAN 1~4: Schliesen Sie Computer, Switches und den Belegdrucker
(optional) mit einem Ethernet-Kabel an die LAN-Ports eines
Computers an.
1
2
3
4
20
2. WAN: Schließen Sie Ihr Breitband-Modem an diesen Anschluss mit
dem Ethernet Kabel, das mit dem Modem geliefert wurde, an.
3. Schließen Sie die mitgelieferten Antennen an den N4100 an. Die
Antennen sollten senkrecht zum Boden und parallel zueinander
angeordnet sein.
4. POWER: Schließen Sie den Stromadapter des N4100 an den
Stromanschluß des N4100 an.
Die Bedeutung der LED-Anzeigen
Der N4100 verfügt an seiner Vorderseite über eine Reihe von LED-
Anzeigen.
• Die PWR-LED leuchtet.
• Die WAN- oder LAN-LED leuchtet, wenn ein Gerät am
entsprechende Port richtig angeschlossen wurde. Die LEDs
blinken, während der N4100 Daten über den jeweiligen Port sendet
oder empfängt.
• Die WLAN-LED leuchtet grün, wenn das drahtlose LAN aktiviert ist.
Sie blinkt, während der N4100 Daten über die Drahtlosverbindung
sendet/empfängt.
• Die SYS-LED leuchtet, sobald der N4100 bereit ist.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140

ZyXEL N4100 Manuale del proprietario

Categoria
Router
Tipo
Manuale del proprietario
Questo manuale è adatto anche per