Vermeiren Eris Manuale utente

VERMEIREN

Eris

I N S T R U C T I O N M A N U A L

M A N U E L D ' U T I L I S A T I O N

G E B R U I K S A A N W I J Z I N G

G E B R A U C H S A N W E I S U N G M

A N U A L E D I I S T R U Z I O N I M A N

U A L D E I N S T R U C C I O N E S I N S

T R U K C J A O B S Ł U G I

N Á V O D K O B S L U Z E

All

rights reserved, including translation.

No part of this manual may be reproduced in any form

what so ever (print, photocopy, microfilm or any other

process) without written permission of the publisher, or

processed, duplicated or distributed by using electronic

systems.

Aucune partie de ce manuel ne peut être reproduite,

sous quelque forme que ce soit (imprimée, photocopie,

microfilm ou tout autre procédé) sans l'autorisation écrite

du publicateur, ni traitée, dupliquée ou distribuée à l'aide

de systèmes électroniques.

Alle rechten, inclusief vertaling, voorbehouden.

Niets uit deze handleiding mag geheel of gedeeltelijk in

enige vorm (druk, fotokopie, microfilm of ieder ander

procedé) zonder de schriftelijke toelating van de uitgever

worden gereproduceerd of met behulp van elektronische

systemen worden verwerkt, gekopieerd of verspreid.

Alle Rechte, auch an der Übersetzung, vorbehalten.

Kein Teil der Gebrauchsanweisung darf in irgendeiner

Form (Druck, Fotokopie, Mikrofilm oder einem anderen

Verfahren) ohne schriftliche Genehmigung des

Herausgebers reproduziert oder unter Verwendung

elektronischer Systeme verarbeitet, vervielfältigt oder

verbreitet werden.

Il presente manuale non può essere riprodotto, neppure

parzialmente, con alcun mezzo (stampa, fotocopia,

microfilm o altro procedimento) senza l’autorizzazione

scritta della casa produttrice, né elaborato, duplicato o

distribuito con l’ausilio di sistemi elettronici.

traducción.

Se prohíbe la reproducción total o parcial del presente

manual de cualquier forma (impresión, fotocopia,

microfilm o cualquier otro procedimiento), así como la

edición, copia o distribución empleando sistemas

electrónicos, sin el permiso escrito del editor.

Wszelkie prawa zastrzeżone, łącznie z

tłumaczeniem.

Żadna część niniejszej instrukcji nie może być

powielana w jakiejkolwiek formie (drukowanej, fotokopii,

mikrofilmu ani innej) bez pisemnej zgody wydawcy, nie

może być również przetwarzana, kopiowana ani

rozprowadzana za pomocą systemów elektronicznych.

Všechna práva vyhrazena, včetně překladu.

Šíření jakékoliv části tohoto katalogu jakýmkoliv

způsobem (tisk, kopie, mikrofilm nebo jiný způsob) bez

písemného souhlasu vydavatele, nebo zpracování,

duplikace či distribuce prostřednictvím elektronických

systémů je zakázáno.

EN

Instructions for specialist dealer

This instruction manual is part and parcel

of the product and must accompany every

product sold.

Version: D, 2019-03

FR

Instructions pour les distributeurs

Ce manuel d'instructions fait partie du

produit et doit accompagner chaque

produit vendu.

Version : D, 2019-03

NL

Instructies voor de vakhandelaar

Deze handleiding is deel van het product

en dient bij iedere product te worden

geleverd.

Versie: D, 2019-03

DE

Hinweise für den Fachhändler

Diese Gebrauchsanweisung ist Bestand-

teil des Produkts und ist bei jeder

Produkts auszuhändigen.

Version: D, 2019-03

IT

Istruzioni per il rivenditore

Il presente Manuale di istruzioni è parte

integrante del prodotto e deve essere

fornito assieme alla prodotto.

Versione: D, 2019-03

ES

Instrucciones destinadas a los distri-

buidores especializados

El presente manual de instrucciones es

parte integrante del producto y se debe

adjuntar a todas las producto que se

vendan.

Versión: D, 2019-03

PL

Instrukcje dla wyspecjalizowanego

sprzedawcy

Niniejsza instrukcja obsługi jest

nieodłączną częścią produktu i musi być

dołączona do każdego sprzedawanego

produktu.

Wersja: D, 2019-03

CS

Pokyny pro specializovaného prodejce

Tento návod k obsluze je součástí

dodávky a musí být součástí každého

prodaného produktu.

Verze: D, 2019-03

Language index

English

Français

Nederlands

Deutch

Italiano

Español

Polski

Czech

Instruction manual

Manuel d'utilisation

Gebruiksaanwijzing

Gebrauchsanweisung

Manuale di istruzioni

Manual de instrucciones

Instrukcja obsługi

Návod k obsluze

Eris

2019-03

Page 1

Contents

1 Product description ...................................................................................... 3

1.1 Intended Use 3

1.2 Safety instructions 4

1.3 Technical specifications 5

1.4 Accessories 6

1.5 Components 7

1.6 Location identification plate 7

1.7 Explanation of symbols 8

1.8 Expected lifespan 8

2 Use ................................................................................................................. 9

2.1 Remarks on electromagnetic compatibility (EMC) 9

2.2 Carrying the scooter 10

2.3 Assembly and disassembly of the scooter 10

2.4 Operating the brakes 11

2.5 Transfer in and out the scooter 11

2.6 Correct position in the scooter 11

2.7 Driving the scooter 12

2.8 Driving the scooter on ramps 14

2.9 Driving the scooter over obstacles 15

2.10 Operator control 15

2.11 Neutral 16

2.12 Transport 16

2.13 Automatic power shut down 17

2.14 Charging the batteries 17

3 Installation and adjustment ........................................................................ 19

3.1 Tools 19

3.2 Manner of delivery 19

3.3 Adjusting the steering unit 19

3.4 Adjusting the seat 20

3.5 Folding the backrest 21

3.6 Adjusting the rear view mirrors 22

3.7 Adjusting the armrests 22

3.8 Tyre changing 22

3.9 Thermal fuses 23

3.10 Anti-tipping 24

3.11 Changing the battery 24

4 Maintenance ................................................................................................ 25

4.1 Instructions for reuse 25

5 End of use ................................................................................................... 26

6 Declaration of conformity .......................................................................... 26

Eris

2019-03

Page 2

Preface

First of all we want to thank you for putting your trust in us by selecting one of our scooters.

The expected lifetime of your scooter is strongly influenced by the care and maintenance of

the scooter.

This manual will help you get acquainted with the operation of your scooter.

Following the user instructions and the maintenance instructions are an essential part of the

warranty.

This manual reflects the latest product developments. Vermeiren has the right to introduce

changes without the obligation to adapt or replace previously delivered models.

For any further questions, please consult your specialist dealer.

Information available

On our website http://www.vermeiren.com/ you will always find the most recent version of

following information. Please consult this website regularly since the printed version may be

out of date.

 This manual

Visually impaired people can download the electronic version of this manual

and have it read out by means of a text-to-speech software application.

 EC declaration of conformity

For user and specialist dealer

 Instructions for mounting and demounting of optional parts

For specialist dealer

 Service manual

For specialist dealer

Contact details

To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.

Eris

2019-03

Page 3

1 Product description

1.1 Intended Use

The scooter is intended to comfortably transport people. This scooter is designed to transport 1

person. Do not carry passengers on your scooter (including children).

The scooter is designed to transport adult people only, no goods, nor any persons under the age of

16.

Neither should it be used by people obviously suffering from physical or mental limitations that render

them incapable of safely handling the scooter in traffic.

These limitations could involve:

 hemiplegics or paraplegics

 mental disorders

 visual impairment

The scooter is classified as class B.

The scooter is suited for outdoor use by the occupant.

When providing for individual requirements:

 body size and weight (max. 140 kg)

 physical and psychological condition

 residential circumstances

 environment

should be taken into consideration.

Your scooter should be used on flat surfaces where all four wheels are touching the ground and where

there is sufficient contact to propel the wheels equally.

You should practice for use on uneven surfaces (cobblestones, etc.), slopes, curves and to get past

obstacles (curbs, etc.).

The scooter should not be used as a ladder, nor is it a transport for heavy or hot objects.

When using your scooter on streets or footpaths, local laws and regulations apply.

The scooter can be used on sidewalks, urban road. Under no circumstances the scooter may be used

for driving on larger roads or expressways.

Use only Vermeiren approved accessories.

The manufacturer is not liable for damage caused by the lack of or improper service or as a result of

not following instructions from this manual.

Compliance with the user and maintenance instructions are an essential part of the warranty

conditions so we recommend that you read the following pages very carefully.

Visually impaired people can contact the dealer for the instructions for use.

Note: This product is suitable and approved for reuse by another patient, when delivered via a

rental service. Follow the instructions in §4.1

Eris

2019-03

Page 4

1.2 Safety instructions

L Use only Vermeiren approved accessories.

L Before getting on or off, taking apart or transporting your scooter, turn the start key to the “off”

position.

L When transporting the scooter, no persons may be transferred along with it.

L Test the effects on the handling of the scooter when its center of gravity is shifted, for example

on up or down gradients, on laterally sloping ground or when driving over uneven terrain.

L Do not drive on roads with heavy traffic or roads that are muddy, gravelly, bumpy, narrow,

snowed over, icy or canal towpaths not guarded by any fence or hedge.

L Keep away from places where you might get the wheels stuck.

L Pay attention that your clothes do not tangle in the wheels.

L When picking up objects lying in front of, next to, or behind the scooter, take care that you do

not lean too far sideways: risk of tipping over.

L Avoid putting your scooter into the free-wheeling position on slopes.

L Never reverse uphill.

L Reduce speed when you go round corners.

L Do not take the scooter onto escalators.

L While driving, hold the handgrips with both hands.

L Put your legs and feet on the surfaces provided for them during the drive.

L Do not use your scooter in snowing, misty or heavy windy conditions.

L When storing or parking your scooter outside, protect it with a shrouding cover against

humidity.

L High levels of humidity or very cold conditions can reduce the performance of your scooter.

L Use your scooter strictly in accordance with regulations. Avoid driving straight over obstacles

(e.g. step, edge of the curb) or down from high ledges.

L Obey traffic regulations when driving on public roads. Please take other road-users into

consideration.

L As is the case with any other vehicle, you must never be under the influence of alcohol while

driving your scooter. This also applies to indoor driving.

L When traveling outdoors, adapt your driving to weather and traffic conditions.

L When driving in the dark, wear bright clothing or clothing with reflectors to be more visible, and

make sure that the reflectors on the scooter are clearly visible and drive with lighting on.

L Make sure that the lights of your scooter are free from dirt and/or other objects that could hide

them.

L Never use your scooter as a seat in an automobile or other vehicle.

L Check that the profile depth of the tyres is adequate.

L If your scooter has pneumatic tyres, be careful to inflate them to the correct pressure (see

pressure indication on the tyres) for optimal steering and stability of the scooter.

L Make sure that the maximum load of the scooter is not exceeded.

L Do not overload the shopping basket. The maximum load of the shopping basket is 5 kg.

L We advise not to use power strip and extension cord. Use the battery charger directly on the

supply socket. We advise not to use supply sockets with a time switch.

Eris

2019-03

Page 5

1.3 Technical specifications

Technical terms below are valid for the scooter in standard settings and optimum environmental

conditions. If other accessories are used, the tabulated values will change. Changes in outdoor

temperatures, humidity, uphills, downhills, soils and battery levels can reduce output.

Brand

Vermeiren

Address

Vermeirenplein 1/15, B

-

2920 Kalmthout

Type

Rear wheel dri

ve scooters, Class B

Maximum occupant mass

1

4

0 kg

Model

Eris

Descr

iption

Dimensions

Max. speed 6 km/h 10 km/h

Continuous driving distance range* 35 km (Battery 38 Ah)

45 km (Battery 50 Ah)

29 km (Battery 38 Ah)

37 km (Battery 50 Ah)

Length 1185 mm

Width 570 mm

Height 1150 mm

Seat width 435 mm

Folded / dismantled length 950 mm

Folded / dismantled width 570 mm

Folded / dismantled height 600 mm (seat removed; steering unit folded)

Total mass 75 kg

Mass of heaviest part (that can be

dismantled or removed)

57 kg (without seat) or 46 kg (without seat and batteries)

Masses of parts that can be

dismantled or removed

Seat: 11 kg; Batteries: 26,5 kg

Static stability downhill 9°

Static stability uphill 9°

Static stability sideways 9°

Dynamic stability 6°

Maximum safe slope 6°

Ground clearance 50 mm (anti-tipping)

Obstacle climbing 75 mm

Seat plane angle 6°

Effective seat depth 360 mm

Seat surface height at front edge

(measured from ground)

595 mm - 645 mm

Seat surface height at front edge

(measured from footplate)

450 mm - 500 mm

Height footplate 145 mm

Backrest angle 25°

Backrest height 340 mm

Distance between armpad and seat

180 mm

Front location of armrest structure 270 mm

Motor Nom. 320 Watt, electromagnetic brakes

Batteries 38 Ah 50 Ah

Controller 70 A

Eris

2019-03

Page 6

Brand

Vermeiren

Address

Vermeirenplein 1/15, B

-

2920 Kalmthout

Type

Rear wheel dri

ve scooters, Class B

Maximum occupant mass

1

4

0 kg

Model

Eris

Descr

iption

Dimensions

Nominal voltage (battery) 2 x 12V

Degree of protection IPX4

Battery charger 6 Amp (external) 8 Amp (external)

USB connection No

Battery charger protection class IPx1

Battery charger insulation class II

Minimum turning diameter 2900 mm

Reversing width 2900 mm

Diameter rear wheels (number) 3.00-4 air (2)

Tyre pressure, rear (driving) wheels

Max. 3,5 bar

Diameter steering wheels (number) 3.00-4 air (2)

Tyre pressure, steering wheels Max. 3,5 bar

Handle bar Speed control lever

Lights Serial

Indicator light Serial

Mirrors Optional

Storage and use temperature +5 °C to +40 °C

Operating temperature of the

electronics

-10°C to +40°C

Storage and use humidity 30%

Tested and meets requirements of ISO 7176-14:2008

Resistance to ignition acc. to EN1021-2

We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / 1,5°.

* The theoretical driving distance will be reduced if the scooter is used frequently on slopes, rough

ground or to climb curbs. Maximum driving distance is tested according ISO 7176-4 under ideal

circumstances.

Table 1: Technical specifications

1.4 Accessories

The following accessories are available for the scooters Eris:

L WARNING: Risk of injury - Be sure that crutches are attached very well and

cannot fall on the user.

 Crutch holder

 Scooterpac

 Topcase

 Rollator holder

Eris

2019-03

Page 7

1.5 Components

1.6 Location identification plate

The location of the identification plate  is on the rear cover. You can also find an identification plate

under the battery cover.

1 = Backrest

2 = Armrest / Armpad

3 = Seat

4 = Rear frame

5 = Rear light

6 = Rear wheels

7 = Side reflectors

8 = Footplate

9 = Front wheel

10= Head light

11= Front indicator lights

12= Rearview mirror

13= Handgrips

14= Parking brake

15= Lever angle adjustment

steering unit

16= Shopping basket

Eris

2019-03

Page 8

1.7 Explanation of symbols

Maximum mass

Outdoor use

Indoor use (only for battery charger)

Separate recovery and recycling of electric and electronic devices (only for battery

charger)

Protection class II

Maximum safe slope

CE conformity

Maximum speed

Not intended to be used as a seat in a Motor vehicle

Type designation

Warning: Do not Pinch hands / fingers

1.8 Expected lifespan

The average lifespan of your scooter is 5 years. Depending on the frequency of use, driving

circumstances and maintenance, the lifespan of your scooter will increase or decrease.

Eris

2019-03

Page 9

2 Use

This chapter describes the everyday use. These instructions are for the user and the specialist

dealer.

The scooter is delivered fully assembled by your specialist dealer. The instructions intended for the

specialist dealer on how to set up the scooter are given in § 3.

2.1 Remarks on electromagnetic compatibility (EMC)

Your scooter has been tested according ISO 7176-21.

We wish to point out that sources of electromagnetic waves (e.g. cell phones) are liable to create

interferences. The electronics of the scooter itself could affect other electric appliances too.

To reduce the effect of electromagnetic sources of interference, please read the following warnings:

L WARNING: The scooter might disturb the operation of devices in its environment that

emit electromagnetic field.

L WARNING: The driving performance of the scooter can be influenced by electromagnetic

fields (e.g. electricity generators or high power sources).

L WARNING: Avoid using any portable TV or radio in the immediate environment of your

scooter for as long as it is turned on.

L WARNING: Avoid using any transmitter-receiver or cell phones in the immediate

environment of your scooter for as long as it is turned on.

L WARNING: Check the area for transmitter masts and avoid using the scooter close to

them.

L WARNING: If involuntary movements or braking occur, turn off the scooter as soon as it

is safe to do so.

Interfering electromagnetic fields may have a negative effect on the scooter’s electronic systems.

These can include:

 Disengagement of the engine brake

 Uncontrollable behavior by the scooter

 Unintentional steering movements

In the presence of very strong or enduring interfering fields, the electronic systems could even break

down entirely or suffer permanent damage.

Possible sources of radiation include:

 Portable receiver and transmitter installations (receiver and transmitter with fixed antenna

mounted directly on the transmitting unit)

- Transmitting and receiving sets

- Cell phones or "walkie talkie"

- portable TV, radio and navigation devices

- other personal transmitting devices

 Mobile medium-range transmitting and receiving devices (e.g. car antennas, with the antenna

mounted on the outside of the vehicle)

- Fixed transmitting and receiving sets

- Fixed mobile transmitting and receiving devices

- Fixed radio, TV and navigation systems

 Long-range transmitting and receiving devices

- Radio and television towers

- Amateur radio sets

Eris

2019-03

Page 10

Other home devices like CD player, notebook, cordless phones, AM/FM radios, electric shavers and

hair dryers, so far as we know, will have no influence provided that they function perfectly and their

cabling be in an excellent condition. Please conform to the operating instructions accompanying such

electric instruments to ensure trouble free operating of your scooter.

1. Do not operate hand-held (transceivers-receivers), such as citizens band (CB) radios, or turn ON

personal communication devices, such as cellular phones, while the powered vehicle is turned ON;

2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to

them;

3. If unintended movement or brake release occurs, turn the vehicle OFF as soon as it is safe;

4. Be aware that adding accessories or components, or modifying the powered vehicle, may make it

more susceptible to EMI (Note: There is no easy way to evaluated their effect on the overall

immunity of the powered vehicle);

The intensity of the interfering EM energy can be measured in volts per meter (V/m). Each powered

vehicle can resist EMI up to a certain intensity. This is called its “immunity level”. The higher the

immunity level, the greater the protection. At this time, current technology is capable of achieving at

least a 20 V/m immunity level, which would provide useful protection from the more common sources

of radiated EMI. This powered vehicle model as shipped, with no further modification, has an

immunity level of 20 V/m without any accessories.

2.2 Carrying the scooter

The best way to carry the scooter is to make use of neutral mode of the scooter. Place the scooter in

neutral and roll the scooter to the desired place.

If this is not possible you can carry the scooter by following steps:

1. Switch the scooter off.

2. Remove loose parts (seat and batteries).

3. Store loose parts in a safe place.

4. Carry the frame + steering unit with 2 or 3 persons to the desired place. Take the frame on the

chassis, and not by the bumpers or the plastic parts. Only on the fixed parts from the frame.

2.3 Assembly and disassembly of the scooter

L WARNING: Risk of injury - Make sure that all movable parts are assembled properly.

L WARNING: Risk of injury - Assembly and disassembly must be done by trained

personnel (e.g. specialist dealer).

L WARNING: Risk of injury - Be careful not to cut or bruise yourself with the cables.

L WARNING: Risk of injury - Turn the scooter off before disassembly.

L CAUTION: Risk of pinching - Do not place fingers between the components of the

scooter.

To disassemble, please proceed as follows:

 Switch the scooter off.

 Remove the seat (see “Adjusting the seat” chapter).

 Lift off the rear plastic cover of the batteries.

 Loosen the straps used to fasten the

batteries in place.

 Unplug all battery plugs (not the pole

connectors) and all cable plug- and socket

connections.

 Lift the batteries out.

 Fold the steering unit down.

Eris

2019-03

Page 11

To reassemble, please proceed as follows:

 Move the steering unit upwards.

 Put the batteries back in and connect to

the battery plugs (plugs of the same color

go together).

 Use the straps to tighten the batteries in

such a way that they will not move, even

during drives.

 Mount the rear plastic cover.

 Mount the seat (see "Adjusting the seat"

chapter).

2.4 Operating the brakes

To apply the electromagnetic brakes:

1. Let go of the speed or drive lever, the electromagnetic brake in the motor will be activated, the

scooter will stop.

To apply the parking brakes (optional):

1. Pull the brake lever  towards the handgrip.

2. Release the brake lever .

The parking brake tightness can be adjusted by the

brake cable adjuster.

2.5 Transfer in and out the scooter

L WARNING: Risk of injuries – Always turn your scooter OFF before getting on or off your

scooter.

1. Park the scooter as close as possible to the place

where you want to transfer.

2. Check that the control panel (scooter) is switched

off.

3. Put the armpad upwards on the side you want to

transfer.

4. Transfer to / from the seat of the scooter.

2.6 Correct position in the scooter

Some recommendations for a comfortable use of the scooter:

1. Position your backside as close as possible to the backrest.

2. Make sure your upper legs are horizontal.

Eris

2019-03

Page 12

2.7 Driving the scooter

L WARNING: Risk of burns – Be careful when driving in hot or cold environments

(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when

touching - Surfaces can assume the environment temperatures.

L WARNING: Risk of unsafe settings - Use only the driving characteristics described in

this manual.

L WARNING: Risk of injuries – Always turn your scooter OFF before getting on or off your

scooter.

2.7.1 Preparing the scooter for use

When you use your scooter for the first time, make sure that it is standing on level ground. All wheels

must be in contact with the ground.

1. For first time use, fully recharge the batteries.

2. Make sure that the motor is engaged.

3. Set the steering unit in the most comfortable position for yourself and make sure it has been

secured properly.

4. See that the seat has been locked in the driving position.

5. Sit down on the seat and verify that both armrests are folded down so you can rest your arms

on them.

6. Insert contact key and turn to the right, please wait for at least 3 seconds before you press the

speed lever otherwise you have a “delay protection” alarm. If necessary, turn on the

headlights.

7. Check the battery indicator and see that there is enough power for your trip. If not enough

capacity recharge the batteries before departure.

Now put the speed control on the operator control to the minimum position. Your scooter is now ready

for use. Only use higher speed setting when you are confident that you can easily operate and control

your scooter.

Before using the scooter in busy or potentially dangerous areas, familiarize yourself with the operation

of your scooter. Please practice in a wide and open area like a park.

2.7.2 Handling after usage

Before getting off from your scooter, make sure that all four wheels touch the ground simultaneously.

Next turn the key to the “OFF” (charge indicator goes out) to turn off the integrated light.

2.7.3 Parking the scooter

Once your scooter has been turned off, no command can be sent to the driving system. You will be

unable to deactivate the electromagnetic brakes before turning on your scooter again. Always park

your scooter on sites that are well guarded or clearly visible.

2.7.4 Your first trip

L WARNING: Control your scooter - Accustom yourself with the driving behavior of your

scooter.

L WARNING: Control your scooter - Do not use both sides of the speed lever

simultaneously. This might leave you unable to control your scooter.

L WARNING: Control your scooter, risk of injury - Do not adjust the speed while you are

driving.

L WARNING: Risk of injury - Be sure no people or objects are behind you while reversing

the scooter.

 Driving

Once you are seated on your scooter and have started it as described above, take hold of the

handgrips with both hands, put your fingers to pull the speed lever in the required direction, i.e.:

Eris

2019-03

Page 13

PULL ACTION BY THE RIGHT HAND = FORWARD MOVEMENT

PULL ACTION BY THE LEFT HAND = BACKWARD MOVEMENT

While using your scooter indoor, do not put your scooter in the highest speed.

 Driving on the pavement

Ensure the limit switch is set to the slowest setting when using the scooter on the pavement. The

maximum speed to drive on the pavement depends from country to country. Check the traffic law from

the relevant country.

The limit switch can be set to the fastest setting for use on the road or on private ground.

 Braking

To brake, let go of the speed/drive lever, which will let it return to the zero position and slow down your

scooter to a gentle stop. Practice pulling away and braking to get accustomed to the scooter. You

need to be able to estimate how your scooter will react when you drive or brake.

Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and possible risk of

accident and injury.

 Driving in corners and bends

L WARNING: Risk of tipping over - Reduce your speed before you enter a curve or

corner.

L WARNING: Risk of clamping - Always maintain an adequate distance from corners and

obstacles.

L WARNING: Risk of tipping over - Do not drive your vehicle in an "S" pattern or make

erratic turnings.

For corners and bends, use both hands to turn the handle bar in the direction you wish to take. The

front wheels will turn accordingly and steer the scooter into a new direction. It is very important that

you ensure that there is enough space allowing you to go around bends and corners. Narrow

passages must preferably be approached in a large curve so as to allow you to enter the narrowest

part as straight from the front as possible. Bear in mind that your scooter’s back part will in most cases

be wider than the front part.

Take care not to enter curves and corners diagonally. By ‘cutting the corner’, chances are that your

rear wheels will run into obstacles and destabilize your scooter.

2.7.5 Backward movement

L WARNING: Control your scooter - Accustom yourself with the driving behavior of your

scooter.

L WARNING: Control your speed - Always go backward in the lowest speed possible.

L WARNING: Risk of collision - Always look to the back when you go backward.

Rearward driving requires increased concentration and care (LEFT HAND ACTION). This explains

why we have greatly reduced the speed of rearward movement in comparison with forward driving.

But we still recommend that you put the speed lever on minimum when you drive backward.

Do not forget that the steering direction with rearward driving is the opposite of when you go forward,

and that your scooter will turn directly in the required direction.

2.7.6 Going uphill

L WARNING: Control your scooter - Accustom yourself with the driving behavior of your

scooter.

L WARNING: Control your scooter - Never put your scooter in neutral on slopes.

L WARNING: Control your speed - Moving on slopes as fast as possible.

L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static

stability uphill (see paragraph "Technical specifications").

L WARNING: Never reverse going uphill.

Eris

2019-03

Page 14

Sitting position, going uphill

 Adjust your seat depth and backrest angle, in order to sit in most front position, see section

§3.4 and §3.5 for adjustment.

 Always lean forward when climbing a steep gradient.

Always approach slopes directly from the front and, to avoid tipping over, see that all four wheels stay

in contact with the ground at all times (ramps, driveways, etc.). Your scooter is powered through a

differential. Both drive wheels should therefore stay in contact with the ground at all times. Should one

of the drive wheels no longer be in contact with the ground, a safety device will cut the transmission of

energy to the wheels, bringing the scooter to a halt.

If you come to a stop on a slope by letting go of the accelerator, the engine break will prevent your

scooter from rolling backward. As soon as the accelerator returns to zero position, the engine break is

activated.

To resume your uphill drive, push the accelerator throttle open fully to ensure the release of a

sufficient amount of power. This will allow your scooter to slowly ascend the slope.

If your scooter is unable to drive up, turn the speed control up and try again.

When driving on a gradient, the battery indicator light might move up and down. This is a normal

phenomenon so please do not worry.

2.7.7 Going downhill

L WARNING: Control your scooter - Accustom yourself with the driving behavior of your

scooter.

L WARNING: Control your scooter - Never put your scooter in neutral on slopes.

L WARNING: Control your speed - Moving on slopes as slow as possible.

L WARNING: Risk of tipping over - Avoid sharp bends.

L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static

stability downhill (see paragraph "Technical specifications").

Sitting position, going downhill

 Adjust your seat depth and backrest angle, in order to sit in most rearward position, see

section §3.4 and §3.5 for adjustment.

 Always lean backward when descending a steep gradient.

Always approach downhill slopes directly from the front. Slantwise approaches can lead to some of

the wheels no longer staying in contact with the ground (danger of tipping over). If one of the back

wheels fails to make contact, the transmission of power will be cut and the scooter come to a

standstill.

The weight of the scooter will increase your downhill speed. Turn the speed control down and adjust

your speed to the conditions.

Avoid sharp bends on downhill slopes. The weight of your scooter could cause your scooter to lift up

on one side or even fall over around bends.

2.8 Driving the scooter on ramps

L WARNING: Risk of injury - Do not exceed the maximum load of the ramps.

L WARNING: Risk of injury - Choose the correct ramps so there cannot be caused any

injury or damage.

L WARNING: Risk of injury - Note that the considerable weight of the electric scooter

generated large reverse forces when an attendant is pushing the scooter over the ramps.

L WARNING: Risk of injury - Be sure that the wheel height is high enough to get over the

free height of the ramps. The scooter frame may not touch the ramps.

Eris

2019-03

Page 15

Should you wish to use ramps to drive over an obstacle, please note the following:

1. Find out from the manufacturer what the maximum load is for the ramps.

2. Drive on the ramps at the lowest speed possible.

3. See the instructions in the chapter "your first trip".

2.9 Driving the scooter over obstacles

L WARNING: Risk of injuries by unexpected movement

 Do not use your scooter on an escalator.

 Do NOT drive on slopes, obstacles, steps or kerbs larger than the size described in the

technical specification in §1.3.

 Approach a kerb always from the front.

 Make sure that all wheels make contact to the ground during driving up or down.

L CAUTION: Risk of damage

If necessary, take a short run up to speed-up the scooter to mount the obstacle or kerb.

Prevent that you or your scooter has to cope with a large recoil.

2.10 Operator control

 Put the ON/OFF key switch on, please wait for at least 3 seconds before you press the speed

lever otherwise you have a “delay protection” alarm.

 Now the battery level indicator  will light up and shows the current level of your batteries.

 Now turn the speed switch  to the desired driving speed.

 Pull the drive lever with your fingers backwards (right lever for forward movement, left lever for

backward movement).

 To sound the horn, press the horn button .

 To put on the front and back lights, press the light button .

 To put on the emergency flashers, press button .

 To put on the indicator lights, press the desired button  and  (left = left indicator, right = right

indicator).

 To stop the scooter loosen the speed lever under the operator control.

Vermeiren is responsible for the changes in the software. For changes in the software contact

Vermeiren.

1

2

3

4

5

6

7

8

1 = Trouble indicator

2 = Speed switch

3 = Head Lights

4 = Horn

5 = Indicator (left)

6 = Emergency lights

7 = Indicator (right)

8 = Battery level indicator

Eris

2019-03

Page 16

2.11 Neutral

L WARNING: Control your scooter - Never put your scooter in neutral while you are

driving.

L WARNING: Control your scooter - Never put your scooter in neutral on slopes. It may

accidentally roll away.

L WARNING: Risk of injury - Never pick up the electronic drive before stopping the

motor/gears to prevent motor from overheating.

The scooter is fitted with a freewheel device that is accessible and operable by the attendant or the

user when not sitting in the scooter. You should only use the scooter in neutral to transport the scooter

or to move it out of a danger zone.

Put the scooter in neutral with the motor stop lever  on the back side of the scooter.

 Driving

1. Put the motor stop lever  on drive. This will again interlock the motor and gears.

2. Switch the ON/OFF key ON.

3. Electronically controlled driving is now possible.

 Neutral

1. Switch the ON/OFF key OFF.

2. Put the motor stop lever  on neutral (see label). This separates the motor from the gears.

3. The scooter can now be pushed without electronic drive.

2.12 Transport

2.12.1 By aircraft

Since the scooter is equipped with non-spillable AGM battery, it is possible to transport the

scooter (as a whole) by aircraft. Consult your airline for the correct handling procedures before

booking your flight.

Before handing your scooter over to the airport personnel, disconnect, and if necessary, remove the

battery from the scooter. See also section §3.11 about the battery replacement.

La pagina si sta caricando...

Vermeiren Eris Manuale utente

Vermeiren Eris Manuale utente

in altre lingue

Documenti correlati

Altri documenti