Philips MC-V320/21M Manuale utente

Marca: Philips

Modello: MC-V320/21M

Categoria: Set audio per la casa

Tipo: Manuale utente

Questo manuale è adatto anche per

MC-V320

MC-V320/21-1

Micro Hi-Fi System

MC-V320

MC-V320/21-1

Optimum disc playability :

ensuring excellent picture quality

Philips components and modules for the various

CD applications have always enjoyed an

excellent reputation in the market place for

super disc playability - the ability to play discs

which may be scratched, soiled or not fully

according to the standard specification. This

position has been underlined by tests showing

the superior performance of the various Philips

players, as well as by the positive experiences of

millions of individual consumers around the

world.

Constantly improving performance

As the penetration of the CD system has

increased, and new applications like CD-ROM

and Video CD have become commonplace,

Philips Components - as the CD technology

inventor and as one of the major suppliers of

CD player modules in the industry - has

constantly improved the performance of its

products.

One of the ways in which this benefits users is

by optimum disc playability. This is an important

parameter for CD players other than CD Audio,

and especially for the Video CD applications,

because any loss of data from the disc will at

best cause disturbances in the reproduced

picture, and at worst can cause the player to lose

track so that disc playing fails.

Presenting Super Error Correction

To ensure consistently good results when playing

Video CD discs of all quality grades and

conditions, Philips has introduced further

improvements in the system's playability. These

developments together are called Super Error

Correction, a proprietary Philips technology

optimizing the system's ability to handle less-

than-perfect discs with the minimum disturbance

to normal playing.

By effectively eliminating virtually all errors arising

under normal playing conditions, Super Error

Correction ensures that the picture quality as

seen by the user is independent of disc play. The

video encoding and processing during mastering

of the disc, and the MPEG-1 decoding and video

encoding in the signal processing stages, are now

the only limiting factors for picture quality.

MC-V320/21-1

⁄

•

≥

∞

≤

™

)

(

English

MC-V320/21-1

English ------------------------------------------------ 6

Index

-------------------------------------------------------- 33

CAUTION

Use of controls or adjustments or

performance of procedures other

than herein may result in hazardous

radiation exposure or other unsafe

operation.

English

MC-V320/21-1

Contents

General Information

Environmental information ................................ 7

Supplied accessories ............................................ 7

Safety information ................................................ 7

Preparations

Rear connections .......................................... 8 – 9

Optional connection ........................................... 9

Inserting batteries into

the Remote Control ............................................ 9

Controls

Controls on the system and remote

control ............................................................ 10-12

Basic Functions

Switching the system on ................................... 13

Power-saving automatic standby ..................... 13

Adjusting volume and sound............................ 13

CD/VCD/MP3-CD Operation

Discs for Playback .............................................. 14

Playing a disc ........................................................ 15

Selecting a different track ................................. 15

Finding a passage within a track ...................... 15

Different play modes:

SHUFFLE and REPEAT ...................................... 16

Text display and ID3 Text ................................. 16

Programming the disc tracks ........................... 16

Erasing the program .......................................... 16

VIDEO CD

Adjusting the TV System ................................... 17

OSD – On Screen Display ............................... 17

Playing a Video CD with PBC .......................... 17

Return ................................................................... 18

Digest .................................................................... 18

A-B Repeat .......................................................... 18

Go To .................................................................... 18

Resume ................................................................. 19

Slow ....................................................................... 19

Vocal ...................................................................... 19

Key Control ......................................................... 19

Echo ....................................................................... 19

Microphone Mixing ............................................ 19

Radio Reception

Tuning to radio stations .................................... 20

Programming radio stations ............................. 20

Tuning to preset radio stations ....................... 21

Changing Tuning Grid ........................................ 21

Tape Operation / Recording

Tape playback ...................................................... 22

Switching tape sides ........................................... 22

Reverse mode options ...................................... 22

General information on recording ................. 23

Synchro start CD recording ............................ 23

Recording from the radio ................................. 23

Recording from the Aux ................................... 23

Recording timer .................................................. 23

Clock/Timer

Setting the clock ................................................. 24

Setting the timer ................................................. 24

Activating and deactivating TIMER ................. 24

Specifications ........................................... 25

Maintenance.............................................. 26

Troubleshooting ............................. 26–27

English

MC-V320/21-1

General Information

IMPORTANT!

PLEASE NOTE THAT THE VOLTAGE

SELECTOR LOCATED AT THE REAR OF

THIS SYSTEM IS PRESET AT 220V FROM

THE FACTORY. FOR COUNTRIES THAT

OPERATE AT 110V-127V, PLEASE ADJUST

TO 110V-127V BEFORE YOU SWITCH ON

THE SYSTEM.

Environmental Information

All unnecessary packaging has been omitted. We

have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene (bags,

protective foam sheet).

Your system consists of materials which can be

recycled and reused if disassembled by a

specialized company. Please observe the local

regulations regarding the disposal of packaging

materials, exhausted batteries and old

equipment.

Supplied accessories

– Remote control

– Batteries (two AA size) for remote control

– AM loop antenna

– FM wire antenna

– One Video cinch cable

– 2 speaker boxes

Safety Information

● Before operating the system, check that the

operating voltage indicated on the typeplate (or

the voltage indication beside the voltage

selector) of your system is identical with the

voltage of your local power supply. If not, please

consult your dealer.

● Place the system on a flat, hard and stable

surface.

● Place the system in a location with adequate

ventilation to prevent internal heat build-up in

your system. Allow at least 10 cm (4 inches)

clearance from the rear and the top of the unit

and 5 cm (2 inches) from each side.

● Do not expose the system, batteries or discs to

excessive moisture, rain, sand or heat sources

caused by heating equipment or direct sunlight.

● If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lens of the disc

unit inside the system. Should this occur, the CD

player would not operate normally. Leave the

power on for about one hour with no disc in the

system until normal playback is possible.

● The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or

lubricated.

● When the system is switched to Standby

mode, it is still consuming some power.

To disconnect the system from the

power supply completely, remove the AC

power plug from the wall socket.

English

MC-V320/21-1

Preparations

Rear connections

The type plate is located at the rear of the

system.

A Power

Before connecting the AC power cord to the

wall outlet, ensure that the following are done;

– If your system is equipped with a Voltage

Selector, set the VOLTAGE SELECTOR to the

local power line voltage.

– All other connections have been made.

WARNING!

– For optimal performance, use only the

original power cable.

– Never make or change any connections

with the power switched on.

To avoid overheating of the system, a safety

circuit has been built in. Therefore, your

system may switch to Standby mode

automatically under extreme conditions. If

this happens, let the system cool down

before reusing it (not available for all versions).

B Antennas Connection

Connect the supplied AM loop antenna and FM

antenna to the respective terminals. Adjust the

position of the antenna for optimal reception.

AM Antenna

speaker

(right)

speaker

(left)

AC power cord

AM loop

antenna

FM wire antenna

VIDEO

Television

AUDIO

OUT

English

MC-V320/21-1

Preparations

● Position the antenna as far as possible from a TV,

VCR or other radiation source.

FM Antenna

● For better FM stereo reception, connect an

outdoor FM antenna to the FM AERIAL (FM

ANTENNA) terminal.

C Speakers Connection

Front Speakers

Connect the speaker wires to the SPEAKERS

terminals, right speaker to "RIGHT" and left

speaker to "LEFT", colored (marked) wire to

"+" and black (unmarked) wire to "-".

● Fully insert the stripped portion of the speaker

wire into the terminal as shown.

Notes:

– For optimal sound performance, use the

supplied speakers.

– Do not connect more than one speaker to any

one pair of

speaker terminals.

– Do not connect speakers with an impedance

lower than the speakers supplied. Please refer to

the SPECIFICATIONS section of this manual.

D Video Out Connection

Connect the VIDEO OUT (CVBS) terminal

at the rear of the system to the TV or VCR

VIDEO IN for viewing or recording.

Note:

– To avoid magnetic interference with the picture

on your TV, do not position the front speakers too

close to the TV.

Optional connection

The optional equipment and connecting cords

are not supplied. Refer to the operating

instructions of the connected equipment for

details.

Connecting other equipment to your

system

Connect the audio left and right OUT terminals

of a TV, VCR, Laser Disc player, DVD player or

CD Recorder to the AUX terminals.

Note:

– If you are connecting equipment with a mono

output (a single audio out terminal), connect it to

the AUX left terminal. Alternatively, you can use a

“single to double” cinch cable (the output sound

still remain mono).

Inserting batteries into the

Remote Control

Insert two batteries (Type R06 or AA) into the

remote control with the correct polarity as

indicated by the + and - symbols inside the

battery compartment.

CAUTION!

– Remove batteries if they are exhausted

or not to be used for a long time.

– Do not use old and new or different

types of batteries in combination.

– Batteries contain chemical substances, so

they should be disposed off properly.

English

MC-V320/21-1

Controls (main system’s illustration on page 3&4)

Controls on the system and

remote control

1 Display

– shows the status of the system.

2 PROG/ REV

for VCD/ CD/ MP3 ...... programmes tracks and

reviews the programme.

for TUNER ........................ programmes tuner

stations manually or

automatically.

for TAPE .............................. sets tape reverse mode

3 CLOCK SET

for CLOCK ....................... set the clock function.

for VCD/ CD/ MP3 ...... starts or interrupts CD

playback

for TAPE .............................. starts the tape playback

4 Mode Selection

VOLUME (-/+)

– adjusts the volume level.

– on the system only - adjusts the hour and minutes

for the clock/timer functions.

PRESET/ TIMER SET / (TITLE –/+)

for TUNER ........................ selects a preset radio

station.

for VCD/ CD/ MP3 ...... skips to the beginning of a

current track/ previous/

subsequent track

................................................. select next or previous

for Timer ( only) to set timer under standby

SEARCH/ TUNE / (ALBUM –/+)

for TUNER ........................ Tune to a station

for VCD/ CD ................... fast searches back and

forward within a track.

for MP3 ............................... ALBUM select.

for TAPE .............................. fast rewind/ wind tape

STOP 9

for VCD/ CD/ MP3 ...... stops VCD/ CD/ MP3

playback or erase a VCD/

CD/ MP3 programme.

for TUNER ........................ stops programming

for TAPE .............................. stops tape playback/

recording.

REC ● ............................... starts recording.

5 SOURCE ●

– selects the respective sound source for CD/

TUNER/ TAPE /AUX.

– switches on the system.

6 DISPLAY-BAND

for TUNER ........................ change the tuner radio

band.(FM/ MW)

for VCD/ CD/ MP3 ...... change the CD display

mode

for TAPE .............................. select tape direction

7 iR SENSOR

– infrared sensor for remote control.

8 STANDBY ON 2

– switches the system to standby.

9 PHONES - connects to headphone.

0 LEVEL (mic)

– to adjust the mixing level for karaoke or

microphone recording.

! MIC

– to connect microphone jack.

– open/ close the cassette door.

# CD OPEN

– open the CD door.

$ INTERACTIVE SOUND controls:

DBB .................................... (Dynamic Bass Boost)

enhances the bass.

DSC ..................................... (Digital Sound Control)

selects sound

characteristics: CLASSIC/

JAZZ/ ROCK/ OPTIMAL.

% 2

– to switch the system to Standby mode.

^ DIGIT 0/-- – 9

(numbers consisting more than two or three figures

must be Press & hold 0/--.)

– to select a track number for CD/VCD/MP3-CD.

– to select tuner preset.

& MODE

REPEAT

– repeats a track/ CD programme/ entire CD.

SHUFFLE

– plays CD tracks in random order.

English

MC-V320/21-1

Controls

* VOLUME (-/+)

– to increase or decrease the volume.

– adjusts the hour and minutes for the clock/ times

junctions.

( DIGEST

– to scan through a VCD or a specific track.

) A - B

– to playback a certain scene or passage of a CD/

VCD repeatedly.

¡ SLOWÖ

– to watch the VCD at a slower speed.

™ RESUME

– to continue playback again from where you have

stopped (for VCD with PBC switched off).

£ ECHO -/+

– to adjust the VCD echo level for karaoke after

inserted the microphone.

KEY CONTROL ( I È i )

– to change the VCD key tone level to suit your

vocal range.

I ........................... to decrease the key tone level.

È .............................. to restore the key tone level to

original setting.

i ............................. to increase the key tone level.

VOCAL

– to fade out the original vocal from a Karaoke

VCD or to switch between mono or stereo

mode during audio disc playback.

§ GOTO

– select time to begin playback within track.

VCD Operation (for VCD version 2.0 only)

PBC (PLAYBACK CONTROL)

– to switch on or off PBC mode.

RETURN

– to return to the previous MENU level during

playback (for VCD with PBC switched on).

• TIMER ON / OFF

– activates/deactivates the timer function.

ª Mode Selection

PLAY PAUSE

for CD/VCD/MP3-CD…to start or interrupt

playback.

for TAPE .................................... to start playback.

/ (ALBUM

for MP3-CD only ................ to select previous/next

Album

for CD/VCD .......................... to search backward/

forward.

for TUNER .............................. to tune to a lower or

higher radio frequency.

for TAPE .................................... to rewind or fast

forward.

STOP Ç

for CD/VCD/MP3-CD ..... to stop playback or to

clear a programme.

for TAPE .................................... to stop playback or

recording.

....................................................... to reset tape counter

number.

/ (TITLE

for MP3-CD only ................ to select previous/next

Title.

for VCD only .......................... to select next or

previous MENU or

VCD track during

playback (for VCD with

PBC switched on).

for CD/VCD .......................... to skip to the previous

or next track.

for TUNER .............................. to select a preset radio

station.

º PROGRAM

for CD/VCD/MP3-CD… to programme disc

tracks.

for TUNER .............................. to programme preset

radio stations manually

or automatically

English

MC-V320/21-1

Controls

Notes for remote control:

– First, select the source you wish to control

by pressing one of the source select keys on

the remote control (VCD/ CD or TUNER, for

example).

– Then select the desired function ( ,

for example).

⁄ VCD/ CD

– to select disc (this system can playback normal

CD/VCD/MP3-CD format disc).

– to select corresponding video output for NTSC

or PAL system of your TV set (except Multi-

system TV).

TUNER

– to select tuners mode.

TAPE

– to select tape deck mode.

AUX / (CDR/DVD)

– to select a connected external source :

CDR/DVD or AUX (auxiliary) mode.

¤ OSD (ON SCREEN DISPLAY)

– to switch on or off the on screen display on the

TV.

English

MC-V320/21-1

Basic Functions

IMPORTANT!

Before you operate the system, complete

the preparation procedures.

Switching the system on

● Press 2 STANDBY ON.

➜ The system will switch to the last selected

source.

● Press VCD, TUNER, TAPE or AUX on the

remote control.

➜ The system will switch to the selected source.

To switch the system to standby mode

● Press 2 STANDBY ON.

● If in recording mode, press STOP 9 first.

➜ The volume level(up to a maximum volume

level of 20), interactive sound settings, last

selected source and tuner presets will be

retained in the player's memory.

Power-saving automatic standby

As a power-saving feature, the system

automatically switches to standby 15 minutes

after a tape or CD has reached the end and no

control is operated.

Adjusting volume and sound

1 Press VOLUME –/+ to decrease to increase

volume on the system.

➜ Display shows the volume level VOL and a

number from MIN1, 2, ...38, 39 MAX.

2 Press DSC repeatedly to select the desired

sound effect: CLASSIC/ JAZZ/ ROCK/

OPTIMAL.

3 Press DBB to switch bass enhancement on or

off.

➜ Display shows: DBB ON or DBB OFF.

Note:

– To listen through the headphones connect the

headphones plug to the PHONES socket at the top

of the system.

➜ The speakers will be muted.

English

MC-V320/21-1

CD/VCD/MP3-CD Operation

IMPORTANT!

– This system is designed for regular discs.

Therefore, do not use any accessories such

as disc stabiliser rings or disc treatment

sheets, etc., as offered on the market,

because they may jam the disc mechanism.

– Do not load more than one disc into the

tray.

Before viewing the Video CD, ensure that

the set is switched to corresponding PAL or

NTSC system of your TV set (exception

Multi-system TV).

Discs for Playback

This system can playback all digital audio CD,

video CD, MP3-CD format discs, finalised digital

audio CD-Recordable (CDR) discs and finalised

digital audio CD-Rewritable (CDRW)discs.

Support following MP3-CD formats

(IS09660 format):

● Max. Title/Album name - 8 characters

● Max. Title number plus Album is 640

● Max. nested directory is 8 levels

● The max. Album number is 255

● The max. MP3 programme track number is 40

● Supported VBR bit-rate

● Supported sampling frequencies for MP3 disc :

32 kHz, 44.1 kHz, 48 kHz

● Supported Bit-rates of MP3 disc are: 56, 64, 96,

128, 192, 256 (kbps)

Following formats can’t be supported

● The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS

● Non English Album/Title name

Note:

– For mixed mode discs, only one mode will be

selected for playback depending on the recording

format.

IMPORTANT!

The lens of the CD player should never be

touched.

English

MC-V320/21-1

CD/VCD/MP3-CD Operation

Playing a disc

● CD-ROM, CD-I, CDV, DVD or computer CDs,

however, are not possible.

1 Select VCD/ CD source.

2 Press CD OPEN on the top

of the system to open the CD compartment.

➜ OPEN is displayed when you

open the CD compartment.

3 Put a disc with the printed side facing up and

press down. Push the front panel to close.

➜ READING as the CD player scans the

contents of a disc, and then the total number of

tracks and playing time are shown. (CD/ VCD

only)

4 Press to start playback.

➜ Current track number and elapsed playing

time of the track are displayed during disc

playback.

5 To interrupt playback press . Press again

to resume play.

6 To stop disc playback, press STOP 9.

Note: CD play will also stop when;

– the CD door is opened.

– the disc has reached the end.

– you select another source: TAPE, TUNER or AUX.

For MP3-CD only

● Load a MP-3 CD format music disc on the disc

tray.

➜ The total album number and total title/ track

number "018 120" will be displayed. MP3,

ALB and TRH will be shown.

Notes:

– Load the discs with the label side facing up.

– To ensure good system performance, wait until

the disc completely reads the disc before

proceeding.

– For MP3-CD, the disc reading time may exceed

10 seconds due to the large number of songs and

different formats compiled into one disc.

Selecting a different track

● Press or once or repeatedly until the

desired track number appears in the display.

● If you have selected a track number shortly after

loading a disc or in the PAUSE position, you will

need to press to start playback.

● Press digit 0/-- – 9 on the remote control to

direction selecting the desired track.

For MP3-CD only

To select a desired Album

● Press or (or ALBUM –/+ on Remote

Control) repeatedly until the desired Album

appears on the display.

➜ ALB and “0XX 120” will be displayed.

To select a desired Title/ Track

● Press or (on TITLE –/+ on Remote

Control) repeatedly until the desired Title

appears on the display.

● Use the digital keys on the remote control to

select the track.

➜ TRH and “018 XXX” will be displayed.

Notes:

– ALB represents ALBUM and TRH represents

Title/ Track, "XX" or "XXX" is the current selected

Album or Title/ Track number.

– Press & hold digit “0/ –” will show

– “– –” for CD & VCD

– “– – –” for MP3 then Press 0-9

Finding a passage within a track

To search for a particular passage during

playback:

1 Press and hold down on or (on à / á

on Remote Control)

➜ The disc is played at high speed and low

volume. (CD only)

2 When you recognise the passage you want,

release or . (on à / á on Remote

Control)

➜ Normal playback continues.

Note:

– During a disc programme or if SHUFFLE/

REPEAT active, searching is only possible within the

same track.

English

MC-V320/21-1

CD/VCD/MP3-CD Operation

For VCD only

● Press or to select 4 different search

speed.

➜ "FRX1"; "FRX2"; "FRX3" or "FRX4" will be

displayed on the TV screen when you select a

fast rewind search.

➜ "FFX1"; "FFX2"; "FFX3" or "FFX4" will be

displayed on the TV screen when you select a

fast forward search.

➜ Normal playback will begin at the end of the

fast rewinding or forwarding of the selected

track.

● Play returns to normal when PLAY is

pressed or when a new track is selected.

Different play modes: SHUFFLE

and REPEAT

You can select and change the various play

modes before or during playback. The play

modes can also be combined with PROGRAM.

SHUFFLE ......... tracks of the entire disc are

played in random order

SHUFFLE and REPEAT ALL…to repeat the

entire disc continuously in

random order

REPEAT ALL ... repeats the entire disc/ program

REPEAT ............ plays the current track

continuously

1 To select your play mode, press the MODE on

the remote control before or during playback

until the display shows the desired function.

(SHUF, REPEAT, REPEAT ALL)

2 Press to start playback if in the STOP

position.

3 To return to normal playback, press the

respective MODE button until the various

SHUFFLE / REPEAT modes are no longer

displayed.

● You can also press STOP 9 to cancel your play

mode.

Notes:

– Stop mode

(Shuffle

➝

Shuffle Repeat all

➝

Repeat all

➝

Repeat)

– Play mode

(Repeat all

➝

Repeat

➝

Play)

– Shuffle Play mode

(Shuffle

➝

Shuffle Repeat all

➝

Shuffle)

Text display and ID3 Text

This feature use to display the title and album

name for MP3-CD.

● Press DISPALY (OSD on Remote Control)

repeatedly to display the title or album name

and ID3 Text.

Notes:

– Album No, Title No. & Play time

– Title Name & Play time

– Album Name & Play time

– ID3 TEXT (Title/ Artis/ Album & play time)

Programming the disc tracks

Programming tracks is possible when playback is

stopped. Up to 40 tracks can be stored in the

memory in any order.

1 Load the desired discs on the disc tray.

2 Press the VCD/ CD button to select the

Source.

3 Press PROG/ REV (PROGRAM on Remote

Control) to start programming.

➜ A track number is shown and PROGRAM

will on.

4 Press or (or Digits 0/-- –9 on the remote

control) repeatedly to select the desired track.

¶ For MP3-CD, press ALBUM

+ and TITLE

+ to select the desired Album and Title for

programming.

5 Press PROG/ REV (PROGRAM on Remote

Control) to store the track.

¶ Repeat steps 3–5 to store other tracks.

6 Press CLOCK SET to start programme

playback.

● To end programming without starting playback,

press Ç once.

Notes:

– Programme cannot be used for VCDs when PBC

is switched on. Switch off PBC before storing tracks.

– If you attempt to programme more than 40

tracks, "MEMORY FULL" will be displayed.

Erasing the program

You can erase the program by:

● pressing STOP 9 twice during playback;

● opening the CD compartment;

➜ PROGRAM disappears from the display.

● change to other source

English

MC-V320/21-1

OSD – On Screen Display

If you insert VCD/ CD/ MP3, your TV screen will

serve as an additional display for messages (e.g.

PLAY, STOP), and information stored on the

VCD.

● Press DISPLAY or OSD on the remote

control repeatedly to switch on or off the On

Screen Display.

When OSD is switched ON; you can see the

following display on the TV screen.

Below is an example of the OSD message.

– Track playtime

– Track remain playtime

– Total remain playtime

– OFF

SINGLE ELAPSED

PLAY XX/TT MM:SS

–"XX" is the current track.

–"TT" is the total tracks.

–"MM" is in minutes.

–"SS" is in seconds.

Note:

– You can also view the information from a

MP3-CD or normal CD.

Playing a Video CD with PBC

VCD with PBC (Playback Control) will be

indicated on the display of the set as soon as

they are inserted. PBC is a predefined play

sequence stored on the VCD.

1 Switch on the TV, insert a VCD with PBC and

press to start playback.

2 MENU appears on the TV screen.

If the menu consists of a list of titles, you

can select a sequence directly

● Press Digits 0/-- –9 on the remote control to

select your choice.

➜ The VCD starts playing of the selected

sequence automatically.

Note:

– If a menu consists of more than one page, press

/ to go through the pages.

Switching off PBC

● press PBC on the Remote Control.

➜ “PBC OFF” will be apears on the TV screen.

Notes:

– Programme mode is not available whenever PBC

mode is switched on.

– The menu structure depends on the information

stored on the VCD. Please refer to the information

supplied with the disc.

– Press & hold digit “0/--” will show “--” for CD &

VCD, “---” for MP3 then Press 0-9.

CD/VCD/MP3-CD Operation

Adjusting the TV System

Before viewing the Video CD, ensure that the set

is switched to corresponding PAL or NTSC

system of your TV set (except Multi–system TV).

● Press and hold VCD/ CD on

Remote Control for more than

3 seconds to switch between

PAL or NTSC TV system.

➜ After TV system is selected,

the set will automatically

switch to the last TV system setting every time

the VCD source is selected.

Note:

– Before adjusting the TV system, make sure that

there is no MP3-CD in disc tray during power up.

VIDEO CD

English

MC-V320/21-1

Return

● Press RETURN to return to the previous VCD

disc MENU level. PBC mode must be switched

on.

Digest

This feature allows you to scan through a VCD

for a quick review. PBC mode must be switched

off. There are four digest mode for selection.

1 Press DIGEST on the remote control.

➜ "DIGEST" appears on the display.

➜ "1. INTRO" , "2. DISC" , "3. TRACK" and

"4.EXIT" appear on the TV screen.

1. INTRO

3. TRACK

2. DISC

4. EXIT

DIGEST MENU

● Press digit

1 on the remote control to select

"INTRO".

➜ The first 10 seconds of each track are played.

● Press digit

2 on the remote control to select

"DISC".

➜ The first frame of each track appears on the

TV screen.

➜ Press digit 0 – 9 on the remote control to

playback the desired tracks.

➜ Press or to view the previous or next

page for additional information.

● Press digit

3 on the remote control to select

"TRACK".

➜ The first track of the selected disc will be

divided into 9 parts and displayed on the TV

screen.

➜ Press digit 0 – 9 on the remote control to

playback the desired parts.

➜ Press or to digest the next track.

2 To exit DIGEST mode, press digit

4 on the

remote control to select "EXIT".

A-B Repeat

This feature is also applicable to audio CD

(except for MP3-CD). To play a certain scene or

passage of the disc repeatedly.

1 Press A-B on the remote control during

playback to mark the start of the chosen scene

or passage.

➜ "SET A" appears on the display.

2 Press A-B again to mark the end of the chosen

scene or passage.

➜ "SET B" appears on the display.

● The selected scene or passage is played

repeatedly.

➜ "PLAY AB" appears on the display.

3 Press A-B once more to return to normal

playback.

➜ "CLEAR AB" appears on the display.

Notes:

– You can also cancel A-B Repeat by pressing

– You can only able to set the A-B marking within

the same track. Once it crosses from one track to

the next, the A-B marking is reset.

GOTO

1 Press GOTO

➜ “--: --” appears on the TV screen.

2 Press digit 0/-- – 9 the remoto control to select

current track time to begin playback.

Notes:

– Switch off PBC before select GOTO.

CD/VCD/MP3-CD Operation

English

MC-V320/21-1

Resume

This feature is also applicable to audio CD

(except for MP3-CD).

● In stop mode, press RESUME on the remote

control to start playback again from where you

have stopped.

Note:

– Resume information is lost if opened the disc

tray, change source or disconnected the system

from the power supply.

– Resume is not available when PBC mode is

switched on.

Slow

1 Press SLOW on the remote control to watch a

VCD at a slower speed. There are 3 types of

slow modes to select.

➜ The sound will be muted.

➜ On TV screen, “SLOW 1”, “SLOW 2” or

“SLOW 3” will be displayed.

2 To resume playback at normal speed, press

PLAYÉÅ.

Vocal

This feature allows you to fade out the original

vocal from a karaoke VCD. This feature is used

together with Echo mode. You can also use it to

select the different audio modes.

● Pressing VOCAL on the remote control

repeatedly allows you to select the following

modes.

➜ STEREO ™ STEREO VOCAL LEFT ™

STEREO VOCAL RIGHT ™ MONO LEFT ™

MONO RIGHT ™ STEREO …

STEREO – same effect as the original recorded

disc.

STEREO VOCAL LEFT/RIGHT – fade out the

original vocal for special recorded Karaoke disc

only (with the ECHO mode switched on).

MONO LEFT/RIGHT – select the language on a

bilingual VCD.

Ensure that Echo mode is switched on

when press VOCAL to fade out the original

vocal during STEREO VOCAL LEFT/RIGHT

mode.

CD/VCD/MP3-CD Operation

Key Control ( I È i )

This feature allows you to change the key tone

of your vocal range.

● Press

I on the remote control to decrease

vocal key level.

➜ "KEY -X" appears on the display.

● Press

i on the remote control to increase vocal

key level.

➜ "KEY +X" appears on the display.

● Press

ÈÈ

È on the remote control to restore vocal

key to original setting.

➜ "KEY FLAT" appears on the display.

Note:

–“X” denotes the key level.

Echo

This feature allows you to add echo while singing

or talking through a microphone.

● Press ECHO

+ on the remote control to

decrease, increase or switch off the echo effect.

➜ "MIC OFF, MIC ON, ECHO +X" appears on

the display.

Notes:

–“X” denotes the echo level.

– You are advised to switch off the echo effect

when not using the feature.

Microphone Mixing

Connect a microphone (not supplied) to the

system allowing you to sing along with the music

source.

1 Connect a microphone to the MIC jack.

● Before connecting the microphone, set the

LEVEL to the minimum level to prevent

howling sound.

2 Press VCD/ CD source to be mixed and start

playback.

3 Press Echo to switch “MIC ON“.

4 Adjust the volume level of the source with

VOLUME –/+ control.

5 Adjust the microphone volume with LEVEL

control.

Notes:

– Keep the microphone away from the speakers to

prevent howling.

– Mixing only on VCD/ CD/ MP3 mode.

For Recording, please refer to “Tape

Operation/ Recording”.

English

MC-V320/21-1

Radio Reception

Tuning to radio stations

1 Select TUNER source.

➜ TUNER is displayed briefly.

2 Press BAND on set only once or more to

select your waveband (FM/ MW).

3 Press down TUNE or and release

button.

➜ The radio automatically tunes to a station

with sufficient reception. Display indication during

automatic tuning: SEARCH.

➜ If a FM station is received in stereo, is

shown.

4 Repeat step 3 if necessary until you find the

desired station.

● To tune to a weak station, press TUNE or

briefly and repeatedly until you have found

optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations

in the memory.

Automatic programming

Automatic programming will start with a chosen

preset number. From this preset number

upwards, former programmed radio stations will

be overridden. The system will only program

stations which are not in the memory already.

1 Press PRESET or to select the preset

number where programming should start.

Note:

– If no preset number is selected, default is preset

(1) and all your presets will be overridden.

2 Press PROG/ REV (PROGRAM on remote

control) for more than 2 seconds to activate

programming.

➜ AUTO is displayed and available stations are

programmed in order of waveband reception

strength: FM followed by MW The last preset

automatically stored will then be played.

Manual programming

1 Tune to your desired station (see “Tuning to

radio stations”).

2 Press PROG/ REV (PROGRAM on remote

control) to activate programming.

3 Press PRESET or to allocate a number

from 1 to 40 to this station.

4 Press PROG/ REV (PROGRAM on remote

control) again to confirm the setting.

➜ The preset number and the frequency of the

preset station are shown.

5 Repeat the above four steps to store other

stations.

● You can override a preset station by storing

another frequency in its place.

La pagina sta caricando ...

Philips MC-V320/21M Manuale utente

Marca: Philips

Modello: MC-V320/21M

Categoria: Set audio per la casa

Tipo: Manuale utente

Questo manuale è adatto anche per

MC-V320

Scarica il pdf

rapporto

in altre lingue

English: Philips MC-V320/21M User manual

Philips MC-V320/21M Manuale utente

Questo manuale è adatto anche per

Philips MC-V320/21M Manuale utente

in altre lingue

Documenti correlati

Altri documenti