Philips 109B50/97 Manuale utente

electronic user's manual

file:///D|/EDFU/crt_19_5/edoc/english/109B/manual.html2005-04-21 ¤W¤È 09:32:26

Safety & Troubleshooting

Safety and Troubleshooting Information

Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other

Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those

specified in this documentation may result in exposure to shock, electrical

hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

● Disconnect the monitor from the power supply if the monitor is not to be used for an

extended period of time.

● Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The

back cover should only be removed by qualified service personnel.

● Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them

and prevent proper cooling of the monitor's electronic devices.

● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain

or excessive moisture.

● Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a

slightly damp cloth. Disconnect the monitor from the power supply before cleaning.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

Consult a service technician if the monitor does not operate normally when operating instructions of

this manual are followed.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/109B/SAFETY/SAFETY.HTM2005-04-21 ¤W¤È 09:33:13

About This Electronic User's Manual

About This Guide • Other Documents You May Need • Notational Descriptions

About This Guide

This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes

the monitor's features, setup, operation and all other information, which is the same exact

information described in our printed version.

The sections are as follows:

● Safety and Troubleshooting Information provides tips and solutions for common problems,

and other related information you may need.

● About This Electronic User's Manual gives overview of what information are included as well

as notation icon descriptions and other documentation you can refer to.

● Product Information gives an overview of the monitor's features and as well as the technical

specifications for this monitor.

● Installing Your Monitor describes the initial setup process and gives an overview of how to

use the monitor.

● On Screen Display provides information on adjusting the settings on your monitor.

● Customer Care and Warranty is a list of worldwide Philips consumer information centers

along with the help desk phone numbers and information on the applicable warranty of your

product..

● Glossary provides more information for technical terms.

● Download allows users to install the entire manual on their hard drive.

● Frequently Asked Questions provides answers to commonly asked questions.

RETURN TO TOP OF THE PAGE

Other Documents You May Need

In addition to this Electronic User's Guide, you may need to refer to the following documentation:

file:///D|/EDFU/crt_19_5/edoc/english/109B/ABOUT/ABOUT.HTM (1 of 3)2005-04-21 ¤W¤È 09:33:14

About This Electronic User's Manual

● Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the

monitor. This is included with this product.

RETURN TO TOP OF THE PAGE

Notational Descriptions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in

italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: This icon indicates important information and tips that help you make

better use of your computer system.

CAUTION: This icon indicates information that tells you how to avoid either

potential damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you how

to avoid the problem.

SMART HELP: This icon indicates helpful information when adjusting the On

Screen Display of your monitor.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such

cases, the specific presentation of the warning is mandated by regulatory authority.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/109B/ABOUT/ABOUT.HTM (2 of 3)2005-04-21 ¤W¤È 09:33:14

About This Electronic User's Manual

broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.

file:///D|/EDFU/crt_19_5/edoc/english/109B/ABOUT/ABOUT.HTM (3 of 3)2005-04-21 ¤W¤È 09:33:14

109B Product Information

Product Information

Product Features•LightFrame™ for Windows•Technical Specifications• Automatic Power

Saving•Physical Specification•Pin Assignment•Product Views

Product Features

Model Regulation Color

109B50 TCO'03 Gray

109B5:

● 19-inch (18.0" VIS) Real Flat color monitor with excellent front of screen performance for use with

MACs and PCs

● Autoscan covers horizontal frequencies up to 97 kHz offering a maximum resolution of 1920 x 1440

with flicker free display of 1280 x 1024 at up to 91 Hz

● Real Flat High Contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp)

● LightFrame™ for brightest and sharpest display of movie and photo windows

● XSD-Xtra Space Design for large screen display in a small footprint: 19" Real Flat shadow mask

monitor with maximum depth of only 449 mm/17.6" that matches most of today's 19-inch monitors

● Multimedia Base option.

● sRGB for true on screen color representation.

● FCC, CE (in selected countries only) and ISO9241, ISO14001 certified

RETURN TO TOP OF THE PAGE

LightFrame™ for Windows

Introduction

Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT (picture tube)

monitor. LightFrame™ will boost the brightness and sharpness of photos and videos on the monitor screen.

To control the LightFrame™ feature in your monitor, you have to install the LightFrame™ application which

you will find on this CD-ROM.

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (1 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Note

Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier Philips

monitors or other manufacturers’ monitors will not work with this special software. It is recommended that

you install this software only on a Philips monitor designed to use it. These monitors can be identified by

the LightFrame™ logo on the front of the monitor.

This software is not designed for use with LCD flat screen monitors.

LightFrame™ will work with true Windows-based programs and DOS-based programs that operate in a

Windows environment. It will not work with DOS-based programs operating only in a DOS environment.

Language Selection

While English is the default language of LightFrame™, the User Interface can be set up to operate in

Dutch, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese or Korean.

Installation

1)

To install LightFrame™, place the CD in the CD-ROM drive.

2)

Next, when the menu of items on the CD appears on your screen, click on 'Install LightFrame™'.

3)

Now, follow the on-screen prompts to properly install the program. The software checks to see if

you have a compatible monitor. You must agree to the license agreement terms for the software to

install.

4)

After installation, LightFrame™ automatically loads and the icon appears in the taskbar.

Notes

If LightFrame™ detects that your monitor is not LightFrame™ compatible, a message appears on the

monitor screen. If you see this message, you can select to abort or continue the installation. However, if

you continue the installation, LightFrame™ will probably not work on the monitor.

How to use LightFrame™

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (2 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

After installation, LightFrame™ starts up automatically whenever the computer is started.

For information about using LightFrame™ please refer to the help information which is available after

installation.

Compatibility

This version of LightFrame™ is compatible with

Windows 95

Windows 98

Windows Me (Millenium Edition)

Windows XP

Windows 2000 Professional Edition.

LightFrame™ 3 -- Frequently Asked Questions (and answers)

LightFrame™

Q: Is LightFrame™ 2 compatible with LightFrame™ 3?

A: No. If you run LightFrame™ 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing will

happen.

Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor.

A:No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is however

possible to use the LightFrame™ 2 software on a LightFrame™ 1 monitor.

Q:What is the difference between LightFrame™ 1, LightFrame™ 2 and LightFrame™ 3?

A:LightFrame™ 1 was the very first generation of the LightFrame™ feature introduced by Philips. In that

version the user needs to manually turn on/off the feature and select the window or area to apply it to.

LightFrame™ 2 offers the automatic detection in Internet Explorer on top of the LightFrame™ 1 functions.

With this feature LightFrame™ will automatically scan a web page in Internet Explorer, find the largest

picture and enhance it.

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (3 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

LightFrame™ 3 offers everything that LightFrame™ 2 has but now with the possibility to enhance multiple

pictures at the same time. So in a web page LightFrame™ will find all the pictures and enhance them

simultaneously or in a photo viewing application you can enhance multiple photos at once. Furthermore

LightFrame™ 3 comes with an easy to activate full screen function. This is especially handy for games and

movies. Just one click on the full screen button and LightFrame™ enhances your total monitor.

Q:Can I upgrade my current Philips monitor to LightFrame™ 3?

A:No. For LightFrame™ 3 Philips developed special hardware which is build into the monitor. Therefore

upgrading from LightFrame™ 1 or 2 to 3 is not possible. It is however possible to upgrade your

LightFrame™ 1 monitor to LightFrame™ 2 by installing the LightFrame™ 2 software.

Q:Can I install LightFrame™ 3 over an older version?

A:When you install LightFrame™ 3 the setup wizard will scan your system to check if you have an older

version installed. If so, the setup wizard will remove that version before continuing with the installation of

the new version. Please be aware that for LightFrame™ 3 you also need a monitor which is capable of

running the LightFrame™ 3 feature.

Q:How can I tell which version LightFrame™ my monitor can support?

A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo which

you will find on the top, right-hand corner of the monitor. If this logo has a small 3 in it, your monitor is ready

for LightFrame™ 3. Otherwise you should use the LightFrame™ 1 or 2 software.

Q: How many windows can I enhance at the same time?

A:In LightFrame™ 3 it is possible to enhance up to 8 windows at the same time. It is however important to

understand that when other windows, toolbars or menus overlap the enhanced windows, the maximum

number of enhanced windows can be less.

Q:How many pictures can LightFrame™ enhance in Internet Explorer?

A:In Internet Explorer LightFrame™ 3 can enhance up to 16 pictures at the same time. LightFrame™ 3

filters the pictures it finds based on the minimum size of the picture therefore it may happen that some

pictures are not enhanced when you open a web page.

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (4 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Q:Can I enhance two or more area’s at the same time?

A:Yes. With LightFrame™ 3 you have the possibility to select several windows with pictures and videos

and enhance them at the same time.

Q:Some times my mouse changes to a light bulb with a plus sign and sometimes with a minus sign.

What is the difference?

A:The mouse pointer in the shape of a light bulb indicates that LightFrame™ is ready to accept a selection

from you for which window should be enhanced.

If there is a minus sign it means that you are moving over a window where LightFrame™ is already active

and clicking this window will switch the enhancement off. A plus sign appears when moving over a window

which is not enhanced and clicking that one will enable LightFrame™ on that window.

Q:What is wrong when my mouse changes into a light bulb with a red cross?

A:Nothing. It just means that your mouse moves outside the application where you already have one or

more windows enhanced. You can only select windows with in the same application. The cross indicates

that you move into an area where you cannot make a selection.

Q:Can I use LightFrame™ with Netscape?

A: You can use LightFrame™ with Netscape, but its functions are limited to manually highlighting the entire

Netscape client window. Since LightFrame™ is specifically designed for bright, high contrast photo and

video display, highlighting an entire Web page -- including text -- is not recommended.

For best results, we recommend you use LightFrame™ with Microsoft Internet Explorer version 5.0 or

higher. You can downloaded Internet Explorer free of charge from the Microsoft website (

www.microsoft.

com). A copy of Internet Explorer 5.5 is also included on the CD-ROM shipped with your monitor.

Q:Can I activate LightFrame™ on my entire screen?

A:Yes you can. And with LightFrame™ 3 this becomes even easier. There are three ways to do this: 1)

click the full screen button in the LightFrame control bar with your mouse. 2) Press the "windows" hotkey

on your keyboard and press "L". 3) Via the OSD menu, scroll to Extra controls, press "OK", then

LightFrame On.

Q:When I apply LightFrame™ to a text document I get blurry characters, what is wrong?

A:Nothing is wrong. The effect which you see is due to the sharpness enhancement that LightFrame™ is

doing on your monitor. This sharpness improves a photo or video significantly however on black text on a

light background the effect is less favorable. Please keep in mind that LightFrame™ is developed to

enhance your photos and videos and not really for text or synthetic pictures.

You can decrease this effect by lowering the sharpness setting in the LightFrame™ 3 control panel.

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (5 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Q: How can I tell if my monitor comes with LightFrame™ 3?

A: All Philips LightFrame™ 3 monitors display this logo on their front bezel:

Q: How do I use the LightFrame™ 3 control bar that appears at the top my screen?

A: The control bar is another upgrade that helps you run all LightFrame™ 3’s neat, new features. The

illustration below describes the tasks each button performs.

Accustomed to working with the original LightFrame™ tray icon? No problem: It’s still there and can be

used to turn LightFrame™ on or off and check LightFrame™ status.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (6 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Technical Specifications*

CRT

• Size and deflection 19 inch / 46 cm ; 90° deflection angle

• Dot pitch / Grille pitch 0.25 mm

• Horizontal pitch 0.21 mm

• Tube type

Shadow mask, Real Flat, high contrast,high brightness, anti-

glare, anti-static, anti reflection

• Phosphor P22

• Recommended display area 14.0" x 10.4" / 355 x 265 mm

• Maximum display area 14.4" x 10.8" / 365 x 270 mm

SCANNING

• Horizontal scanning 30 - 97 KHz

• Vertical scanning 50 - 160 Hz

VIDEO

• Video dot rate 250 MHz

• Input impedance

- Video 75 ohm

- Sync 4.7 kOhm

• Input signal levels 0.7 Vpp

• Sync input signal Separate sync

• Sync polarities Positive and negative

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:

• at 9300 degrees K x = 0.283 / y = 0.297

• at 6500 degrees K x = 0.313 / y = 0.329

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (7 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

• at 5500 degrees K x = 0.332 / y = 0.347

sRGB

sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital

cameras, monitors, printers, scanners, etc.)

Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible

device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you

can rely on the correctness of the colors shown on your screen.

Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined

setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's

OSD.

To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to

go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK

again.

Exit this OSD.

After this, please don't change the brightness or contrast setting of your monitor. If you change either of

these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.

For more information on sRGB, please visit:

www.srgb.com

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can

automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or

other input device is detected, the monitor will automatically "wake up". The following table shows the

power consumption and signaling of this automatic power saving features:

Power Management Definition

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (8 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

VESA's Mode Video H-sync V-sync Power Used

Power

Saving (%)

LED color

ON Active Yes Yes Typical 75W 0 % Green

OFF Blanked No No < 1W 99%

Flashing

Green

This monitor is

ENERGY STAR

®

compliant. As an ENERGY STAR

®

Partner, PHILIPS has

determined that this product meets the

ENERGY STAR

®

guidelines for energy efficiency.

RETURN TO TOP OF THE PAGE

Physical Specifications

• Dimensions

17.3" x 17" x 17.6" / 440 x 433 x 449mm (including base)

17.3" x 15" x 17.6" / 440 x 383 x 449 mm (excluding base)

• Weight 20 kg

• Power supply 100-240 VAC, 60-50Hz

• Temperature

(operating)

0° to 40°C / 32° to 104°F

• Temperature (storage) -25° to +65°C / -13° to +149°F

• Relative humidity

(storage)

5% to 95%

* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (9 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

No.

Assignment

No.

Assignment

1 Red video input 9 No pin

2 Green video input 10 Logic ground

3 Blue video input 11

Identical output - connected

to pin 10

4

Identical output - connected

to pin 10

12 Serial data line (SDA)

5 Ground 13 H. Sync

6 Red video ground 14 V. Sync

7 Green video ground 15 Data clock line (SCL)

8 Blue video ground

RETURN TO TOP OF THE PAGE

Views

Follow the links to see various views of the monitor and its components.

Front View

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (10 of 11)2005-04-21 ¤W¤È 09:33:15

109B Product Information

Rear View

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/109B/PRODUCT/PRODUCT.HTM (11 of 11)2005-04-21 ¤W¤È 09:33:15

Installing your Monitor

Front View • Rear View • 6G3B11 Multimedia Base (option)

Front View

Power button switches your monitor on.

OK button which when pressed will take you to the OSD controls

Contrast hotkey. When the "-" button is pressed, the adjustment

controls for the CONTRAST will show up.

Brightness hotkey. When the "+" button is pressed, the adjustment

controls for BRIGHTNESS will show up.

file:///D|/EDFU/crt_19_5/edoc/english/install_6/INSTALL.HTM (1 of 3)2005-04-21 ¤W¤È 09:33:16

Installing your Monitor

"-" and "+" buttons, are used for adjusting the OSD of your monitor.

RETURN TO TOP OF THE PAGE

Rear View

file:///D|/EDFU/crt_19_5/edoc/english/install_6/INSTALL.HTM (2 of 3)2005-04-21 ¤W¤È 09:33:16

Installing your Monitor

1. Power in - attach power cable here.

2. Video In - this is a cable which is already attached to your monitor. Connect the other

end of the cable to your PC.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_5/edoc/english/install_6/INSTALL.HTM (3 of 3)2005-04-21 ¤W¤È 09:33:16

On-Screen Display

Description of the On-Screen Display • The OSD Tree • The OSD Controls

Description of the On Screen Display

What is the On-Screen Display?

This is a feature in all Philips monitors which allows an end-user to adjust screen performance of

monitors directly through an on-screen instruction window. The user interface provides user-

friendliness and ease-of-use when operating the monitor.

Basic and simple instruction on the control keys.

On the front controls of your monitor, once you press the

button, the On Screen Display (OSD)

Main Controls window will pop up and you can now start making adjustments to your monitor's

various features. Use the

to make your adjustments within.

file:///D|/EDFU/crt_19_5/edoc/english/OSD_3/OSDDESC.HTM (1 of 4)2005-04-21 ¤W¤È 09:33:17

La pagina si sta caricando...

Philips 109B50/97 Manuale utente

Questo manuale è adatto anche per

Philips 109B50/97 Manuale utente

in altre lingue

Documenti correlati

Altri documenti